| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Unlock ftrace recursion lock when fprobe_kprobe_handler() is failed
because of some running kprobe.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 3cc4e2c5fbae ("fprobe: make fprobe_kprobe_handler recursion free")
Reported-by: Yafang <[email protected]>
Closes: https://lore.kernel.org/linux-trace-kernel/CALOAHbC6UpfFOOibdDiC7xFc5YFUgZnk3MZ=3Ny6we=AcrNbew@mail.gmail.com/
Signed-off-by: Ze Gao <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Acked-by: Yafang Shao <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
The enable_trace_eprobe() function enables all event probes, attached
to given trace probe. If an error occurs in enabling one of the event
probes, all others should be roll backed. There is a bug in that roll
back logic - instead of all event probes, only the failed one is
disabled.
Link: https://lore.kernel.org/all/[email protected]/
Reported-by: Dan Carpenter <[email protected]>
Fixes: 7491e2c44278 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
Since commit e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
it is possible to enable taprio offload with a basetime of 0.
However, the check if taprio offload is already enabled (and thus -EALREADY
should be returned for igc_save_qbv_schedule) still relied on
adapter->base_time > 0.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and base-time = 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
# The second call should fail with "Error: Device failed to setup taprio offload."
# But that only happens if base-time was != 0
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time 0 \
sched-entry S 01 300000 \
flags 0x2
Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <[email protected]>
Reviewed-by: Kurt Kanzenbach <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Only set adapter->taprio_offload_enable after validating the arguments.
Otherwise, it stays set even if the offload was not enabled.
Since the subsequent code does not get executed in case of invalid
arguments, it will not be read at first.
However, by activating and then deactivating another offload
(e.g. ETF/TX launchtime offload), taprio_offload_enable is read
and erroneously keeps the offload feature of the NIC enabled.
This can be reproduced as follows:
# TAPRIO offload (flags == 0x2) and negative base-time leading to expected -ERANGE
sudo tc qdisc replace dev enp1s0 parent root handle 100 stab overhead 24 taprio \
num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 \
base-time -1000 \
sched-entry S 01 300000 \
flags 0x2
# IGC_TQAVCTRL is 0x0 as expected (iomem=relaxed for reading register)
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Activate ETF offload
sudo tc qdisc replace dev enp1s0 parent root handle 6666 mqprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
hw 0
sudo tc qdisc add dev enp1s0 parent 6666:1 etf \
clockid CLOCK_TAI \
delta 500000 \
offload
# IGC_TQAVCTRL is 0x9 as expected
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
# Deactivate ETF offload again
sudo tc qdisc delete dev enp1s0 parent 6666:1
# IGC_TQAVCTRL should now be 0x0 again, but is observed as 0x9
sudo pcimem /sys/bus/pci/devices/0000:01:00.0/resource0 0x3570 w*1
Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <[email protected]>
Reviewed-by: Kurt Kanzenbach <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In the current implementation the flags adapter->qbv_enable
and IGC_FLAG_TSN_QBV_ENABLED have a similar name, but do not
have the same meaning. The first one is used only to indicate
taprio offload (i.e. when igc_save_qbv_schedule was called),
while the second one corresponds to the Qbv mode of the hardware.
However, the second one is also used to support the TX launchtime
feature, i.e. ETF qdisc offload. This leads to situations where
adapter->qbv_enable is false, but the flag IGC_FLAG_TSN_QBV_ENABLED
is set. This is prone to confusion.
The rename should reduce this confusion. Since it is a pure
rename, it has no impact on functionality.
Fixes: e17090eb2494 ("igc: allow BaseTime 0 enrollment for Qbv")
Signed-off-by: Florian Kauer <[email protected]>
Reviewed-by: Kurt Kanzenbach <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
skl_int3472_regulator_second_sensor storage-class-specifier to static
smatch reports
drivers/platform/x86/intel/int3472/clk_and_regulator.c:263:28: warning: symbol
'skl_int3472_regulator_second_sensor' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
cap_offset is a u16 field, so multiplying with TPMI_CAP_OFFSET_UNIT
(which is equal to 1024) to covert to bytes will cause overflow. This
will be a problem once more TPMI features are added.
This field is not used except for calculating pfs->vsec_offset. So, leave
cap_offset field unchanged and multiply with TPMI_CAP_OFFSET_UNIT while
calculating pfs->vsec_offset.
Signed-off-by: Srinivas Pandruvada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Even though we have no issues in the code, let's replace the open
coded guid_parse_and_compare().
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Armin Wolf <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
The while-loop may break on one of the two conditions, either ID string
is empty or GUID matches. The second one, may never be reached if the
parsed string is not correct GUID. In such a case the loop will never
advance to check the next ID.
Break possible infinite loop by factoring out guid_parse_and_compare()
helper which may be moved to the generic header for everyone later on
and preventing from similar mistake in the future.
Interestingly that firstly it appeared when WMI was turned into a bus
driver, but later when duplicated GUIDs were checked, the while-loop
has been replaced by for-loop and hence no mistake made again.
Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id")
Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Armin Wolf <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
There is a small window where we have already incremented the pin count
but not yet moved the bo from the lru to the pinned list.
Signed-off-by: Christian König <[email protected]>
Reported-by: Pelloux-Prayer, Pierre-Eric <[email protected]>
Tested-by: Pelloux-Prayer, Pierre-Eric <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.
...
[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[ 6.120687] Call Trace:
[ 6.120690] <TASK>
[ 6.120694] dump_stack_lvl+0x48/0x70
[ 6.120704] dump_stack+0x10/0x20
[ 6.120707] ubsan_epilogue+0x9/0x40
[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[ 6.120720] ? psi_group_change+0x25f/0x4b0
[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh]
[ 6.120739] get_input_rep+0x57/0x340 [amd_sfh]
[ 6.120748] ? __schedule+0xba7/0x1b60
[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[ 6.120772] process_one_work+0x229/0x430
[ 6.120780] worker_thread+0x4a/0x3c0
[ 6.120784] ? __pfx_worker_thread+0x10/0x10
[ 6.120788] kthread+0xf7/0x130
[ 6.120792] ? __pfx_kthread+0x10/0x10
[ 6.120795] ret_from_fork+0x29/0x50
[ 6.120804] </TASK>
...
Fix this by adding the condition to validate shift ranges.
Fixes: 93ce5e0231d7 ("HID: amd_sfh: Implement SFH1.1 functionality")
Cc: [email protected]
Tested-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Akshata MukundShetty <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
As float32 is also used in other places as a data type, it is necessary
to rename the float32 variable in order to avoid confusion.
Cc: [email protected]
Tested-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Akshata MukundShetty <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Current codebase contained the usage of two different names for this
driver (i.e., `gvnic` and `gve`), which is quite unfriendly for users
to use, especially when trying to bind or unbind the driver manually.
The corresponding kernel module is registered with the name of `gve`.
It's more reasonable to align the name of the driver with the module.
Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Cc: [email protected]
Signed-off-by: Junfeng Guo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
Direct replacement is safe here since return value of -errno
is used to check for truncation instead of sizeof(dest).
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add check for the return value of skb_copy in order to avoid NULL pointer
dereference.
Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet")
Signed-off-by: Jiasheng Jiang <[email protected]>
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
We just sorted the entries and fields last release, so just out of a
perverse sense of curiosity, I decided to see if we can keep things
ordered for even just one release.
The answer is "No. No we cannot".
I suggest that all kernel developers will need weekly training sessions,
involving a lot of Big Bird and Sesame Street. And at the yearly
maintainer summit, we will all sing the alphabet song together.
I doubt I will keep doing this. At some point "perverse sense of
curiosity" turns into just a cold dark place filled with sadness and
despair.
Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields")
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- swiotlb area sizing fixes (Petr Tesarik)
* tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: reduce the number of areas to match actual memory pool size
swiotlb: always set the number of areas before allocating the pool
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq update from Borislav Petkov:
- Optimize IRQ domain's name assignment
* tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Use return value of strreplace()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu fix from Borislav Petkov:
- Do FPU AP initialization on Xen PV too which got missed by the recent
boot reordering work
* tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Fix secondary processors' FPU initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the mechanism to park CPUs with an INIT IPI.
On shutdown or kexec, the kernel tries to park the non-boot CPUs with
an INIT IPI. But the same code path is also used by the crash utility.
If the CPU which panics is not the boot CPU then it sends an INIT IPI
to the boot CPU which resets the machine.
Prevent this by validating that the CPU which runs the stop mechanism
is the boot CPU. If not, leave the other CPUs in HLT"
* tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Don't send INIT to boot CPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes for KVM
- fix for loongson build and cpu probing
- DT fixes
* tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
MIPS: dts: add missing space before {
MIPS: Loongson: Fix build error when make modules_install
MIPS: KVM: Fix NULL pointer dereference
MIPS: Loongson: Fix cpu_probe_loongson() again
|
|
Pull xfs fix from Darrick Wong:
"Nothing exciting here, just getting rid of a gcc warning that I got
tired of seeing when I turn on gcov"
* tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix uninit warning in xfs_growfs_data
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
|
|
Pull NTB updates from Jon Mason:
"Fixes for pci_clean_master, error handling in driver inits, and
various other issues/bugs"
* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
ntb: hw: amd: Fix debugfs_create_dir error checking
ntb.rst: Fix copy and paste error
ntb_netdev: Fix module_init problem
ntb: intel: Remove redundant pci_clear_master
ntb: epf: Remove redundant pci_clear_master
ntb_hw_amd: Remove redundant pci_clear_master
ntb: idt: drop redundant pci_enable_pcie_error_reporting()
MAINTAINERS: git://github -> https://github.com for jonmason
NTB: EPF: fix possible memory leak in pci_vntb_probe()
NTB: ntb_tool: Add check for devm_kcalloc
NTB: ntb_transport: fix possible memory leak while device_register() fails
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: idt: Fix error handling in idt_pci_driver_init()
|
|
Commit 9f4211bf7f81 ("HID: add mapping for camera access keys") added
mapping for the camera access keys, but unfortunately used wrong usage
codes for them. HUTRR72[1] specifies that camera access controls use 0x76,
0x077 and 0x78 usages in the consumer control page. Previously mapped 0xd5,
0xd6 and 0xd7 usages are actually defined in HUTRR64[2] as game recording
controls.
[1] https://www.usb.org/sites/default/files/hutrr72_-_usages_to_control_camera_access_0.pdf
[2] https://www.usb.org/sites/default/files/hutrr64b_-_game_recording_controllers_0.pdf
Fixes: 9f4211bf7f81 ("HID: add mapping for camera access keys")
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/ZJtd/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Previously, support for the G502 had been attempted in commit
'27fc32fd9417 ("HID: logitech-hidpp: add USB PID for a few more supported
mice")'
This caused some issues and was reverted by
'addf3382c47c ("Revert "HID: logitech-hidpp: add USB PID for a few more
supported mice"")'.
Since then, a new version of this mouse has been released (Lightpseed
Wireless), and works correctly.
This device has support for battery reporting with the driver
Signed-off-by: Stuart Hayhurst <[email protected]>
Reviewed-by: Bastien Nocera <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Match alignment information in composite type declarations used by packed
HOSTCMD report structures. Compiler packing attribute is not recursive for
inner declarations. Mismatched alignment information can cause undefined
behavior in code generated for accessing composite type members. struct
pointers passed to thunderstrike_parse_board_info_payload and
thunderstrike_parse_haptics_payload are an example of this being
potentially problematic since alignment information from the packed HOSTCMD
report is lost.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Link: https://github.com/llvm/llvm-project/issues/55520#issuecomment-1128617570
Link: https://gcc.gnu.org/onlinedocs/gcc-13.1.0/gcc/Common-Type-Attributes.html#index-packed-type-attribute
Signed-off-by: Rahul Rameshbabu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
A previous patch addressed the fortified memcpy warning for most
builds, but I still see this one with gcc-9:
In file included from include/linux/string.h:254,
from drivers/hid/hid-hyperv.c:8:
In function 'fortify_memcpy_chk',
inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My guess is that the WARN_ON() itself is what confuses gcc, so it no
longer sees that there is a correct range check. Rework the code in a
way that helps readability and avoids the warning.
Fixes: 542f25a94471 ("HID: hyperv: Replace one-element array with flexible-array member")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
The blamed commit introduces usage of fixed_phy_register() but
not a corresponding dependency on FIXED_PHY.
This can result in a build failure.
s390-linux-ld: drivers/net/ethernet/microchip/lan743x_main.o: in function `lan743x_phy_open':
drivers/net/ethernet/microchip/lan743x_main.c:1514: undefined reference to `fixed_phy_register'
Fixes: 624864fbff92 ("net: lan743x: add fixed phy support for LAN7431 device")
Cc: [email protected]
Reported-by: Randy Dunlap <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Randy Dunlap <[email protected]>
Tested-by: Randy Dunlap <[email protected]> # build-tested
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now in addrconf_mod_rs_timer(), reference idev depends on whether
rs_timer is not pending. Then modify rs_timer timeout.
There is a time gap in [1], during which if the pending rs_timer
becomes not pending. It will miss to hold idev, but the rs_timer
is activated. Thus rs_timer callback function addrconf_rs_timer()
will be executed and put idev later without holding idev. A refcount
underflow issue for idev can be caused by this.
if (!timer_pending(&idev->rs_timer))
in6_dev_hold(idev);
<--------------[1]
mod_timer(&idev->rs_timer, jiffies + when);
To fix the issue, hold idev if mod_timer() return 0.
Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Ziyang Xuan <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
According to commit 01d6c48a828b ("Documentation: kselftest:
"make headers" is a prerequisite"), running the kselftests requires
to run "make headers" first.
Do that in "vmtest.sh" as well to fix the HID CI.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Lockdep is certainly right to complain about
(&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f
but task is already holding lock:
(&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db
Invert those to the usual ordering.
Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible")
Cc: [email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Tested-by: Suren Baghdasaryan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"16 hotfixes. Six are cc:stable and the remainder address post-6.4
issues"
The merge undoes the disabling of the CONFIG_PER_VMA_LOCK feature, since
it was all hopefully fixed in mainline.
* tag 'mm-hotfixes-stable-2023-07-08-10-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: dhry: fix sleeping allocations inside non-preemptable section
kasan, slub: fix HW_TAGS zeroing with slub_debug
kasan: fix type cast in memory_is_poisoned_n
mailmap: add entries for Heiko Stuebner
mailmap: update manpage link
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
MAINTAINERS: add linux-next info
mailmap: add Markus Schneider-Pargmann
writeback: account the number of pages written back
mm: call arch_swap_restore() from do_swap_page()
squashfs: fix cache race with migration
mm/hugetlb.c: fix a bug within a BUG(): inconsistent pte comparison
docs: update ocfs2-devel mailing list address
MAINTAINERS: update ocfs2-devel mailing list address
mm: disable CONFIG_PER_VMA_LOCK until its fixed
fork: lock VMAs of the parent process when forking
|
|
When forking a child process, the parent write-protects anonymous pages
and COW-shares them with the child being forked using copy_present_pte().
We must not take any concurrent page faults on the source vma's as they
are being processed, as we expect both the vma and the pte's behind it
to be stable. For example, the anon_vma_fork() expects the parents
vma->anon_vma to not change during the vma copy.
A concurrent page fault on a page newly marked read-only by the page
copy might trigger wp_page_copy() and a anon_vma_prepare(vma) on the
source vma, defeating the anon_vma_clone() that wasn't done because the
parent vma originally didn't have an anon_vma, but we now might end up
copying a pte entry for a page that has one.
Before the per-vma lock based changes, the mmap_lock guaranteed
exclusion with concurrent page faults. But now we need to do a
vma_start_write() to make sure no concurrent faults happen on this vma
while it is being processed.
This fix can potentially regress some fork-heavy workloads. Kernel
build time did not show noticeable regression on a 56-core machine while
a stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~5% regression. If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance. Further
optimizations are possible if this regression proves to be problematic.
Suggested-by: David Hildenbrand <[email protected]>
Reported-by: Jiri Slaby <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Holger Hoffstätte <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: Jacob Young <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aaea03e ("x86/mm: try VMA lock-based page fault handling first")
Cc: [email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
mmap_region adds a newly created VMA into VMA tree and might modify it
afterwards before dropping the mmap_lock. This poses a problem for page
faults handled under per-VMA locks because they don't take the mmap_lock
and can stumble on this VMA while it's still being modified. Currently
this does not pose a problem since post-addition modifications are done
only for file-backed VMAs, which are not handled under per-VMA lock.
However, once support for handling file-backed page faults with per-VMA
locks is added, this will become a race.
Fix this by write-locking the VMA before inserting it into the VMA tree.
Other places where a new VMA is added into VMA tree do not modify it
after the insertion, so do not need the same locking.
Cc: [email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With recent changes necessitating mmap_lock to be held for write while
expanding a stack, per-VMA locks should follow the same rules and be
write-locked to prevent page faults into the VMA being expanded. Add
the necessary locking.
Cc: [email protected]
Signed-off-by: Suren Baghdasaryan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull more SCSI updates from James Bottomley:
"A few late arriving patches that missed the initial pull request. It's
mostly bug fixes (the dt-bindings is a fix for the initial pull)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove unused function declaration
scsi: target: docs: Remove tcm_mod_builder.py
scsi: target: iblock: Quiet bool conversion warning with pr_preempt use
scsi: dt-bindings: ufs: qcom: Fix ICE phandle
scsi: core: Simplify scsi_cdl_check_cmd()
scsi: isci: Fix comment typo
scsi: smartpqi: Replace one-element arrays with flexible-array members
scsi: target: tcmu: Replace strlcpy() with strscpy()
scsi: ncr53c8xx: Replace strlcpy() with strscpy()
scsi: lpfc: Fix lpfc_name struct packing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- xiic patch should have been in the original pull but slipped through
- mpc patch fixes a build regression
- nomadik cleanup
* tag 'i2c-for-6.5-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Drop unused variable
i2c: nomadik: Remove a useless call in the remove function
i2c: xiic: Don't try to handle more interrupt events after error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Check for NULL bdev in LoadPin (Matthias Kaehlcke)
- Revert unwanted KUnit FORTIFY build default
- Fix 1-element array causing boot warnings with xhci-hub
* tag 'hardening-v6.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usb: ch9: Replace bmSublinkSpeedAttr 1-element array with flexible array
Revert "fortify: Allow KUnit test to build without FORTIFY"
dm: verity-loadpin: Add NULL pointer check for 'bdev' parameter
|
|
The debugfs_create_dir function returns ERR_PTR in case of error, and the
only correct way to check if an error occurred is 'IS_ERR' inline function.
This patch will replace the null-comparison with IS_ERR.
Signed-off-by: Anup Sharma <[email protected]>
Suggested-by: Ivan Orlov <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next
Pull more perf tools updates from Namhyung Kim:
"These are remaining changes and fixes for this cycle.
Build:
- Allow generating vmlinux.h from BTF using `make GEN_VMLINUX_H=1`
and skip if the vmlinux has no BTF.
- Replace deprecated clang -target xxx option by --target=xxx.
perf record:
- Print event attributes with well known type and config symbols in
the debug output like below:
# perf record -e cycles,cpu-clock -C0 -vv true
<SNIP>
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 136
config 0 (PERF_COUNT_HW_CPU_CYCLES)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 1 (PERF_TYPE_SOFTWARE)
size 136
config 0 (PERF_COUNT_SW_CPU_CLOCK)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|CPU|PERIOD|IDENTIFIER
read_format ID
disabled 1
inherit 1
freq 1
sample_id_all 1
exclude_guest 1
- Update AMD IBS event error message since it now support per-process
profiling but no priviledge filters.
$ sudo perf record -e ibs_op//k -C 0
Error:
AMD IBS doesn't support privilege filtering. Try again without
the privilege modifiers (like 'k') at the end.
perf lock contention:
- Support CSV style output using -x option
$ sudo perf lock con -ab -x, sleep 1
# output: contended, total wait, max wait, avg wait, type, caller
19, 194232, 21415, 10222, spinlock, process_one_work+0x1f0
15, 162748, 23843, 10849, rwsem:R, do_user_addr_fault+0x40e
4, 86740, 23415, 21685, rwlock:R, ep_poll_callback+0x2d
1, 84281, 84281, 84281, mutex, iwl_mvm_async_handlers_wk+0x135
8, 67608, 27404, 8451, spinlock, __queue_work+0x174
3, 58616, 31125, 19538, rwsem:W, do_mprotect_pkey+0xff
3, 52953, 21172, 17651, rwlock:W, do_epoll_wait+0x248
2, 30324, 19704, 15162, rwsem:R, do_madvise+0x3ad
1, 24619, 24619, 24619, spinlock, rcu_core+0xd4
- Add --output option to save the data to a file not to be interfered
by other debug messages.
Test:
- Fix event parsing test on ARM where there's no raw PMU nor supports
PERF_PMU_CAP_EXTENDED_HW_TYPE.
- Update the lock contention test case for CSV output.
- Fix a segfault in the daemon command test.
Vendor events (JSON):
- Add has_event() to check if the given event is available on system
at runtime. On Intel machines, some transaction events may not be
present when TSC extensions are disabled.
- Update Intel event metrics.
Misc:
- Sort symbols by name using an external array of pointers instead of
a rbtree node in the symbol. This will save 16-bytes or 24-bytes
per symbol whether the sorting is actually requested or not.
- Fix unwinding DWARF callstacks using libdw when --symfs option is
used"
* tag 'perf-tools-for-v6.5-2-2023-07-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (38 commits)
perf test: Fix event parsing test when PERF_PMU_CAP_EXTENDED_HW_TYPE isn't supported.
perf test: Fix event parsing test on Arm
perf evsel amd: Fix IBS error message
perf: unwind: Fix symfs with libdw
perf symbol: Fix uninitialized return value in symbols__find_by_name()
perf test: Test perf lock contention CSV output
perf lock contention: Add --output option
perf lock contention: Add -x option for CSV style output
perf lock: Remove stale comments
perf vendor events intel: Update tigerlake to 1.13
perf vendor events intel: Update skylakex to 1.31
perf vendor events intel: Update skylake to 57
perf vendor events intel: Update sapphirerapids to 1.14
perf vendor events intel: Update icelakex to 1.21
perf vendor events intel: Update icelake to 1.19
perf vendor events intel: Update cascadelakex to 1.19
perf vendor events intel: Update meteorlake to 1.03
perf vendor events intel: Add rocketlake events/metrics
perf vendor metrics intel: Make transaction metrics conditional
perf jevents: Support for has_event function
...
|
|
Pull bitmap updates from Yury Norov:
"Fixes for different bitmap pieces:
- lib/test_bitmap: increment failure counter properly
The tests that don't use expect_eq() macro to determine that a test
is failured must increment failed_tests explicitly.
- lib/bitmap: drop optimization of bitmap_{from,to}_arr64
bitmap_{from,to}_arr64() optimization is overly optimistic
on 32-bit LE architectures when it's wired to
bitmap_copy_clear_tail().
- nodemask: Drop duplicate check in for_each_node_mask()
As the return value type of first_node() became unsigned, the node
>= 0 became unnecessary.
- cpumask: fix function description kernel-doc notation
- MAINTAINERS: Add bits.h and bitfield.h to the BITMAP API record
Add linux/bits.h and linux/bitfield.h for visibility"
* tag 'bitmap-6.5-rc1' of https://github.com/norov/linux:
MAINTAINERS: Add bitfield.h to the BITMAP API record
MAINTAINERS: Add bits.h to the BITMAP API record
cpumask: fix function description kernel-doc notation
nodemask: Drop duplicate check in for_each_node_mask()
lib/bitmap: drop optimization of bitmap_{from,to}_arr64
lib/test_bitmap: increment failure counter properly
|
|
The Smatch static checker reports the following warnings:
lib/dhry_run.c:38 dhry_benchmark() warn: sleeping in atomic context
lib/dhry_run.c:43 dhry_benchmark() warn: sleeping in atomic context
Indeed, dhry() does sleeping allocations inside the non-preemptable
section delimited by get_cpu()/put_cpu().
Fix this by using atomic allocations instead.
Add error handling, as atomic these allocations may fail.
Link: https://lkml.kernel.org/r/bac6d517818a7cd8efe217c1ad649fffab9cc371.1688568764.git.geert+renesas@glider.be
Fixes: 13684e966d46283e ("lib: dhry: fix unstable smp_processor_id(_) usage")
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated
kmalloc space than requested") added precise kmalloc redzone poisoning to
the slub_debug functionality.
However, this commit didn't account for HW_TAGS KASAN fully initializing
the object via its built-in memory initialization feature. Even though
HW_TAGS KASAN memory initialization contains special memory initialization
handling for when slub_debug is enabled, it does not account for in-object
slub_debug redzones. As a result, HW_TAGS KASAN can overwrite these
redzones and cause false-positive slub_debug reports.
To fix the issue, avoid HW_TAGS KASAN memory initialization when
slub_debug is enabled altogether. Implement this by moving the
__slub_debug_enabled check to slab_post_alloc_hook. Common slab code
seems like a more appropriate place for a slub_debug check anyway.
Link: https://lkml.kernel.org/r/678ac92ab790dba9198f9ca14f405651b97c8502.1688561016.git.andreyknvl@google.com
Fixes: 946fa0dbf2d8 ("mm/slub: extend redzone check to extra allocated kmalloc space than requested")
Signed-off-by: Andrey Konovalov <[email protected]>
Reported-by: Will Deacon <[email protected]>
Acked-by: Marco Elver <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Feng Tang <[email protected]>
Cc: Hyeonggon Yoo <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: [email protected]
Cc: Pekka Enberg <[email protected]>
Cc: Peter Collingbourne <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13
builtins") introduced a bug into the memory_is_poisoned_n implementation:
it effectively removed the cast to a signed integer type after applying
KASAN_GRANULE_MASK.
As a result, KASAN started failing to properly check memset, memcpy, and
other similar functions.
Fix the bug by adding the cast back (through an additional signed integer
variable to make the code more readable).
Link: https://lkml.kernel.org/r/8c9e0251c2b8b81016255709d4ec42942dcaf018.1688431866.git.andreyknvl@google.com
Fixes: bb6e04a173f0 ("kasan: use internal prototypes matching gcc-13 builtins")
Signed-off-by: Andrey Konovalov <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
I am going to lose my vrull.eu address at the end of july, and while
adding it to mailmap I also realised that there are more old addresses
from me dangling, so update .mailmap for all of them.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Update .mailmap for my work address and fix manpage".
While updating mailmap for the going-away address, I also found that on
current systems the manpage linked from the header comment changed.
And in fact it looks like the git mailmap feature got its own manpage.
This patch (of 2):
On recent systems the git-shortlog manpage only tells people to
See gitmailmap(5)
So instead of sending people on a scavenger hunt, put that info into the
header directly. Though keep the old reference around for older systems.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
commit dd0ff4d12dd2 ("bootmem: remove the vmemmap pages from kmemleak in
put_page_bootmem") fix an overlaps existing problem of kmemleak. But the
problem still existed when HAVE_BOOTMEM_INFO_NODE is disabled, because in
this case, free_bootmem_page() will call free_reserved_page() directly.
Fix the problem by adding kmemleak_free_part() in free_bootmem_page() when
HAVE_BOOTMEM_INFO_NODE is disabled.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f41f2ed43ca5 ("mm: hugetlb: free the vmemmap pages associated with each HugeTLB page")
Signed-off-by: Liu Shixin <[email protected]>
Acked-by: Muchun Song <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add linux-next info to MAINTAINERS for ease of finding this data.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|