| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If MISC_FMT_OPEN_FILE flag is set e->interp_file must be valid or we
have a bug which should not be silently ignored.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Oleg Nesterov <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ben Woodard <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Jim Foraker <[email protected]>
Cc: <[email protected]>
Cc: Travis Gummels <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
bm_evict_inode()
To ensure that load_misc_binary() can't use the partially destroyed
Node, see also the next patch.
The current logic looks wrong in any case, once we close interp_file it
doesn't make any sense to delay kfree(inode->i_private), this Node is no
longer valid. Even if the MISC_FMT_OPEN_FILE/interp_file checks were
not racy (they are), load_misc_binary() should not try to reopen
->interpreter if MISC_FMT_OPEN_FILE is set but ->interp_file is NULL.
And I can't understand why do we use filp_close(), not fput().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Oleg Nesterov <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ben Woodard <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Jim Foraker <[email protected]>
Cc: <[email protected]>
Cc: Travis Gummels <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kill_node() nullifies/checks Node->dentry to avoid double free. This
complicates the next changes and this is very confusing:
- we do not need to check dentry != NULL under entries_lock,
kill_node() is always called under inode_lock(d_inode(root)) and we
rely on this inode_lock() anyway, without this lock the
MISC_FMT_OPEN_FILE cleanup could race with itself.
- if kill_inode() was already called and ->dentry == NULL we should not
even try to close e->interp_file.
We can change bm_entry_write() to simply check !list_empty(list) before
kill_node. Again, we rely on inode_lock(), in particular it saves us
from the race with bm_status_write(), another caller of kill_node().
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Oleg Nesterov <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ben Woodard <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Jim Foraker <[email protected]>
Cc: <[email protected]>
Cc: Travis Gummels <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "exec: binfmt_misc: fix use-after-free, kill
iname[BINPRM_BUF_SIZE]".
It looks like this code was always wrong, then commit 948b701a607f
("binfmt_misc: add persistent opened binary handler for containers")
added more problems.
This patch (of 6):
load_script() can simply use i_name instead, it points into bprm->buf[]
and nobody can change this memory until we call prepare_binprm().
The only complication is that we need to also change the signature of
bprm_change_interp() but this change looks good too.
While at it, do whitespace/style cleanups.
NOTE: the real motivation for this change is that people want to
increase BINPRM_BUF_SIZE, we need to change load_misc_binary() too but
this looks more complicated because afaics it is very buggy.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Oleg Nesterov <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Travis Gummels <[email protected]>
Cc: Ben Woodard <[email protected]>
Cc: Jim Foraker <[email protected]>
Cc: <[email protected]>
Cc: Al Viro <[email protected]>
Cc: James Bottomley <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When reading the event from the uffd, we put it on a temporary
fork_event list to detect if we can still access it after releasing and
retaking the event_wqh.lock.
If fork aborts and removes the event from the fork_event all is fine as
long as we're still in the userfault read context and fork_event head is
still alive.
We've to put the event allocated in the fork kernel stack, back from
fork_event list-head to the event_wqh head, before returning from
userfaultfd_ctx_read, because the fork_event head lifetime is limited to
the userfaultfd_ctx_read stack lifetime.
Forgetting to move the event back to its event_wqh place then results in
__remove_wait_queue(&ctx->event_wqh, &ewq->wq); in
userfaultfd_event_wait_completion to remove it from a head that has been
already freed from the reader stack.
This could only happen if resolve_userfault_fork failed (for example if
there are no file descriptors available to allocate the fork uffd). If
it succeeded it was put back correctly.
Furthermore, after find_userfault_evt receives a fork event, the forked
userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can
be released by the fork thread as soon as the event_wqh.lock is
released. Taking a reference on the fork_nctx before dropping the lock
prevents an use after free in resolve_userfault_fork().
If the fork side aborted and it already released everything, we still
try to succeed resolve_userfault_fork(), if possible.
Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrea Arcangeli <[email protected]>
Reported-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: "Dr. David Alan Gilbert" <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
With device public pages at the end of my memory space, I'm getting
output from _vm_normal_page():
BUG: Bad page map in process migrate_pages pte:c0800001ffff0d06 pmd:f95d3000
addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping: (null) index:7fff8933
file: (null) fault: (null) mmap: (null) readpage: (null)
CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P B OE 4.14.0-rc1-wip #155
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
print_bad_pte+0x28c/0x340
_vm_normal_page+0xc0/0x140
zap_pte_range+0x664/0xc10
unmap_page_range+0x318/0x670
unmap_vmas+0x74/0xe0
exit_mmap+0xe8/0x1f0
mmput+0xac/0x1f0
do_exit+0x348/0xcd0
do_group_exit+0x5c/0xf0
SyS_exit_group+0x1c/0x20
system_call+0x58/0x6c
The pfn causing this is the very last one. Correct the bounds check
accordingly.
Fixes: df6ad69838fc ("mm/device-public-memory: device memory cache coherent with CPU")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Reza Arbab <[email protected]>
Reviewed-by: Jérôme Glisse <[email protected]>
Reviewed-by: Balbir Singh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear
SwapBacked). There is no lock to prevent the page is added to swap
cache between these two steps by page reclaim. If page reclaim finds
such page, it will simply add the page to swap cache without pageout the
page to swap because the page is marked as clean. Next time, page fault
will read data from the swap slot which doesn't have the original data,
so we have a data corruption. To fix issue, we mark the page dirty and
pageout the page.
However, we shouldn't dirty all pages which is clean and in swap cache.
swapin page is swap cache and clean too. So we only dirty page which is
added into swap cache in page reclaim, which shouldn't be swapin page.
As Minchan suggested, simply dirty the page in add_to_swap can do the
job.
Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages")
Link: http://lkml.kernel.org/r/08c84256b007bf3f63c91d94383bd9eb6fee2daa.1506446061.git.shli@fb.com
Signed-off-by: Shaohua Li <[email protected]>
Reported-by: Artem Savkov <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: <[email protected]> [4.12+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
MADV_FREE clears pte dirty bit and then marks the page lazyfree (clear
SwapBacked). There is no lock to prevent the page is added to swap
cache between these two steps by page reclaim. Page reclaim could add
the page to swap cache and unmap the page. After page reclaim, the page
is added back to lru. At that time, we probably start draining per-cpu
pagevec and mark the page lazyfree. So the page could be in a state
with SwapBacked cleared and PG_swapcache set. Next time there is a
refault in the virtual address, do_swap_page can find the page from swap
cache but the page has PageSwapCache false because SwapBacked isn't set,
so do_swap_page will bail out and do nothing. The task will keep
running into fault handler.
Fixes: 802a3a92ad7a ("mm: reclaim MADV_FREE pages")
Link: http://lkml.kernel.org/r/6537ef3814398c0073630b03f176263bc81f0902.1506446061.git.shli@fb.com
Signed-off-by: Shaohua Li <[email protected]>
Reported-by: Artem Savkov <[email protected]>
Tested-by: Artem Savkov <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: <[email protected]> [4.12+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Eryu noticed that he could sometimes get a leftover error reported when
it shouldn't be on fsync with ext2 and non-journalled ext4.
The problem is that writeback_single_inode still uses filemap_fdatawait.
That picks up a previously set AS_EIO flag, which would ordinarily have
been cleared before.
Since we're mostly using this function as a replacement for
filemap_check_errors, have filemap_check_and_advance_wb_err clear AS_EIO
and AS_ENOSPC when reporting an error. That should allow the new
function to better emulate the behavior of the old with respect to these
flags.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jeff Layton <[email protected]>
Reported-by: Eryu Guan <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The build of m32r allmodconfig is giving lots of build warnings about:
include/linux/byteorder/big_endian.h:7:2:
warning: #warning inconsistent configuration,
needs CONFIG_CPU_BIG_ENDIAN [-Wcpp]
#warning inconsistent configuration, needs CONFIG_CPU_BIG_ENDIAN
Define CPU_BIG_ENDIAN like the way CPU_LITTLE_ENDIAN is defined.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In testing I found handle passed to zs_map_object in __zram_bvec_read is
NULL so eh kernel goes oops in pin_object().
The reason is there is no routine to check the slot's freeing after
getting the slot's lock. This patch fixes it.
[[email protected]: v2]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 1f7319c74275 ("zram: partial IO refactoring")
Signed-off-by: Minchan Kim <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On powerpc, RODATA_TEST fails with message the following messages:
Freeing unused kernel memory: 528K
rodata_test: test data was not read only
This is because GCC allocates it to .data section:
c0695034 g O .data 00000004 rodata_test_data
Since commit 056b9d8a7692 ("mm: remove rodata_test_data export, add
pr_fmt"), rodata_test_data is used only inside rodata_test.c By
declaring it static, it gets properly allocated into .rodata section
instead of .data:
c04df710 l O .rodata 00000004 rodata_test_data
Fixes: 056b9d8a7692 ("mm: remove rodata_test_data export, add pr_fmt")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Jinbum Park <[email protected]>
Cc: Segher Boessenkool <[email protected]>
Cc: David Laight <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Locking of config and doorbell operations should be done only if the
underlying hardware requires it.
This patch removes the global spinlocks from the rapidio subsystem and
moves them to the mport drivers (fsl_rio and tsi721), only to the
necessary places. For example, local config space read and write
operations (lcread/lcwrite) are atomic in all existing drivers, so there
should be no need for locking, while the cread/cwrite operations which
generate maintenance transactions need to be synchronized with a lock.
Later, each driver could chose to use a per-port lock instead of a
global one, or even more granular locking.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ioan Nicu <[email protected]>
Signed-off-by: Frank Kunz <[email protected]>
Acked-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The function is called from __meminit context and calls other __meminit
functions but isn't it self mark as such today:
WARNING: vmlinux.o(.text.unlikely+0x4516): Section mismatch in reference from the function init_reserved_page() to the function .meminit.text:early_pfn_to_nid()
The function init_reserved_page() references the function __meminit early_pfn_to_nid().
This is often because init_reserved_page lacks a __meminit annotation or the annotation of early_pfn_to_nid is wrong.
On most compilers, we don't notice this because the function gets
inlined all the time. Adding __meminit here fixes the harmless warning
for the old versions and is generally the correct annotation.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix the situation when clear_bit() is called for page->private before
the page pointer is actually assigned. While at it, remove work_busy()
check because it is costly and does not give 100% guarantee anyway.
Signed-off-by: Vitaly Wool <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Andrea brought to my attention that the L->{L,S} guarantees are
completely bogus for this case. I was looking at the diagram, from the
offending commit, when that _is_ the race, we had the load reordered
already.
What we need is at least S->L semantics, thus simply use
wq_has_sleeper() to serialize the call for good.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 46acef048a6 (mm,compaction: serialize waitqueue_active() checks)
Signed-off-by: Davidlohr Bueso <[email protected]>
Reported-by: Andrea Parri <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Drop the global lru lock in isolate callback before calling
zap_page_range which calls cond_resched, and re-acquire the global lru
lock before returning. Also change return code to LRU_REMOVED_RETRY.
Use mmput_async when fail to acquire mmap sem in an atomic context.
Fix "BUG: sleeping function called from invalid context"
errors when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Also restore mmput_async, which was initially introduced in commit
ec8d7c14ea14 ("mm, oom_reaper: do not mmput synchronously from the oom
reaper context"), and was removed in commit 212925802454 ("mm: oom: let
oom_reap_task and exit_mmap run concurrently").
Link: http://lkml.kernel.org/r/[email protected]
Fixes: f2517eb76f1f2 ("android: binder: Add global lru shrinker to binder")
Signed-off-by: Sherry Yang <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Reported-by: Kyle Yan <[email protected]>
Acked-by: Arve Hjønnevåg <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Martijn Coenen <[email protected]>
Cc: Todd Kjos <[email protected]>
Cc: Riley Andrews <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Hoeun Ryu <[email protected]>
Cc: Christopher Lameter <[email protected]>
Cc: Vegard Nossum <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix for 4.14, zone device page always have an elevated refcount of one
and thus page count sanity check in uncharge_page() is inappropriate for
them.
[[email protected]: nano-optimize VM_BUG_ON in uncharge_page]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Jérôme Glisse <[email protected]>
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Evgeny Baskakov <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The following lockdep splat has been noticed during LTP testing
======================================================
WARNING: possible circular locking dependency detected
4.13.0-rc3-next-20170807 #12 Not tainted
------------------------------------------------------
a.out/4771 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff812b4668>] drain_all_stock.part.35+0x18/0x140
but task is already holding lock:
(&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_sem){++++++}:
lock_acquire+0xc9/0x230
__might_fault+0x70/0xa0
_copy_to_user+0x23/0x70
filldir+0xa7/0x110
xfs_dir2_sf_getdents.isra.10+0x20c/0x2c0 [xfs]
xfs_readdir+0x1fa/0x2c0 [xfs]
xfs_file_readdir+0x30/0x40 [xfs]
iterate_dir+0x17a/0x1a0
SyS_getdents+0xb0/0x160
entry_SYSCALL_64_fastpath+0x1f/0xbe
-> #2 (&type->i_mutex_dir_key#3){++++++}:
lock_acquire+0xc9/0x230
down_read+0x51/0xb0
lookup_slow+0xde/0x210
walk_component+0x160/0x250
link_path_walk+0x1a6/0x610
path_openat+0xe4/0xd50
do_filp_open+0x91/0x100
file_open_name+0xf5/0x130
filp_open+0x33/0x50
kernel_read_file_from_path+0x39/0x80
_request_firmware+0x39f/0x880
request_firmware_direct+0x37/0x50
request_microcode_fw+0x64/0xe0
reload_store+0xf7/0x180
dev_attr_store+0x18/0x30
sysfs_kf_write+0x44/0x60
kernfs_fop_write+0x113/0x1a0
__vfs_write+0x37/0x170
vfs_write+0xc7/0x1c0
SyS_write+0x58/0xc0
do_syscall_64+0x6c/0x1f0
return_from_SYSCALL_64+0x0/0x7a
-> #1 (microcode_mutex){+.+.+.}:
lock_acquire+0xc9/0x230
__mutex_lock+0x88/0x960
mutex_lock_nested+0x1b/0x20
microcode_init+0xbb/0x208
do_one_initcall+0x51/0x1a9
kernel_init_freeable+0x208/0x2a7
kernel_init+0xe/0x104
ret_from_fork+0x2a/0x40
-> #0 (cpu_hotplug_lock.rw_sem){++++++}:
__lock_acquire+0x153c/0x1550
lock_acquire+0xc9/0x230
cpus_read_lock+0x4b/0x90
drain_all_stock.part.35+0x18/0x140
try_charge+0x3ab/0x6e0
mem_cgroup_try_charge+0x7f/0x2c0
shmem_getpage_gfp+0x25f/0x1050
shmem_fault+0x96/0x200
__do_fault+0x1e/0xa0
__handle_mm_fault+0x9c3/0xe00
handle_mm_fault+0x16e/0x380
__do_page_fault+0x24a/0x530
do_page_fault+0x30/0x80
page_fault+0x28/0x30
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock.rw_sem --> &type->i_mutex_dir_key#3 --> &mm->mmap_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(&type->i_mutex_dir_key#3);
lock(&mm->mmap_sem);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
2 locks held by a.out/4771:
#0: (&mm->mmap_sem){++++++}, at: [<ffffffff8106eb35>] __do_page_fault+0x175/0x530
#1: (percpu_charge_mutex){+.+...}, at: [<ffffffff812b4c97>] try_charge+0x397/0x6e0
The problem is very similar to the one fixed by commit a459eeb7b852
("mm, page_alloc: do not depend on cpu hotplug locks inside the
allocator"). We are taking hotplug locks while we can be sitting on top
of basically arbitrary locks. This just calls for problems.
We can get rid of {get,put}_online_cpus, fortunately. We do not have to
be worried about races with memory hotplug because drain_local_stock,
which is called from both the WQ draining and the memory hotplug
contexts, is always operating on the local cpu stock with IRQs disabled.
The only thing to be careful about is that the target memcg doesn't
vanish while we are still in drain_all_stock so take a reference on it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Artem Savkov <[email protected]>
Tested-by: Artem Savkov <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Andrea has noticed that the oom_reaper doesn't invalidate the range via
mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can
corrupt the memory of the kvm guest for example.
tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not
sufficient as per Andrea:
"mmu_notifier_invalidate_range cannot be used in replacement of
mmu_notifier_invalidate_range_start/end. For KVM
mmu_notifier_invalidate_range is a noop and rightfully so. A MMU
notifier implementation has to implement either ->invalidate_range
method or the invalidate_range_start/end methods, not both. And if you
implement invalidate_range_start/end like KVM is forced to do, calling
mmu_notifier_invalidate_range in common code is a noop for KVM.
For those MMU notifiers that can get away only implementing
->invalidate_range, the ->invalidate_range is implicitly called by
mmu_notifier_invalidate_range_end(). And only those secondary MMUs
that share the same pagetable with the primary MMU (like AMD iommuv2)
can get away only implementing ->invalidate_range"
As the callback is allowed to sleep and the implementation is out of
hand of the MM it is safer to simply bail out if there is an mmu
notifier registered. In order to not fail too early make the
mm_has_notifiers check under the oom_lock and have a little nap before
failing to give the current oom victim some more time to exit.
[[email protected]: coding-style fixes]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: aac453635549 ("mm, oom: introduce oom reaper")
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Andrea Arcangeli <[email protected]>
Reviewed-by: Andrea Arcangeli <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
It is possible that on a (partially) unsuccessful page reclaim,
kref_put() called in z3fold_reclaim_page() does not yield page release,
but the page is released shortly afterwards by another thread. Then
z3fold_reclaim_page() would try to list_add() that (released) page again
which is obviously a bug.
To avoid that, spin_lock() has to be taken earlier, before the
kref_put() call mentioned earlier.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Vitaly Wool <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PH[0-7] from the enum to fix this.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ef0fa5331a73e479 ("sh: Add pinmux for sh7269")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Magnus Damm <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
Cc: Jacopo Mondi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. If enum
values are defined, but never used, pinmux_pins[] contains (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PH[0-7] from the enum to fix this.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 41797f75486d8ca3 ("sh: Add pinmux for sh7264")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Cc: Jacopo Mondi <[email protected]>
Cc: Magnus Damm <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 3810e96056ff ("sh: modify pinmux for SH7757 2nd cut") renamed
GPIO_PT[JLNQ]7 to GPIO_PT[JLNQ]7_RESV, and removed the existing users
from the pinmux_pins[] array.
However, pinmux_pins[] is initialized through PINMUX_GPIO(), using
designated array initializers, where the GPIO_* enums serve as indices.
Hence entries were not really removed, but replaced by (zero-filled)
holes. Such entries are treated as pin zero, which was registered
before, thus leading to pinctrl registration failures, as seen on
sh7722:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
Remove GPIO_PT[JLNQ]7_RESV from the enum to fix this.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 3810e96056ffddf6 ("sh: modify pinmux for SH7757 2nd cut")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Cc: Jacopo Mondi <[email protected]>
Cc: Magnus Damm <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "sh: sh7722/sh7757i/sh7264/sh7269: Fix pinctrl registration",
v2.
Magnus Damm reported that on sh7722/Migo-R, pinctrl registration fails
with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated
array initializers, where the GPIO_* enums serve as indices. Apparently
GPIO_PTQ7 was defined in the enum, but never used. If enum values are
defined, but never used, pinmux_pins[] contains (zero-filled) holes.
Hence such entries are treated as pin zero, which was registered before,
and pinctrl registration fails.
I can't see how this ever worked, as at the time of commit f5e25ae52fef
("sh-pfc: Add sh7722 pinmux support"), pinmux_gpios[] in
drivers/pinctrl/sh-pfc/pfc-sh7722.c already had the hole, and
drivers/pinctrl/core.c already had the check.
Some scripting revealed a few more broken drivers:
- sh7757 has four holes, due to nonexistent GPIO_PT[JLNQ]7_RESV.
- sh7264 and sh7269 define GPIO_PH[0-7], but don't use it with
PINMUX_GPIO().
Patch 1 fixes the issue on sh7722, and was tested. Patches 3-4 should
fix the issue on the other 3 SoCs, but was untested due to lack of
hardware.
This patch (of 4):
On sh7722/Migo-R, pinctrl registration fails with:
sh-pfc pfc-sh7722: pin 0 already registered
sh-pfc pfc-sh7722: error during pin registration
sh-pfc pfc-sh7722: could not register: -22
sh-pfc: probe of pfc-sh7722 failed with error -22
pinmux_pins[] is initialized through PINMUX_GPIO(), using designated array
initializers, where the GPIO_* enums serve as indices. As GPIO_PTQ7 is
defined in the enum, but never used, pinmux_pins[] contains a
(zero-filled) hole. Hence this entry is treated as pin zero, which was
registered before, and pinctrl registration fails.
According to the datasheet, port PTQ7 does not exist. Hence remove
GPIO_PTQ7 from the enum to fix this.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 8d7b5b0af7e070b9 ("sh: Add sh7722 pinmux code")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reported-by: Magnus Damm <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Tested-by: Jacopo Mondi <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Yoshihiro Shimoda <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This fixes a bug in madvise() where if you'd try to soft offline a
hugepage via madvise(), while walking the address range you'd end up,
using the wrong page offset due to attempting to get the compound order
of a former but presently not compound page, due to dissolving the huge
page (since commit c3114a84f7f9: "mm: hugetlb: soft-offline: dissolve
source hugepage after successful migration").
As a result I ended up with all my free pages except one being offlined.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: c3114a84f7f9 ("mm: hugetlb: soft-offline: dissolve source hugepage after successful migration")
Signed-off-by: Alexandru Moise <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Hillf Danton <[email protected]>
Cc: Shaohua Li <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In this place mm is unlocked, so vmas or list may change. Down read
mmap_sem to protect them from modifications.
Link: http://lkml.kernel.org/r/150512788393.10691.8868381099691121308.stgit@localhost.localdomain
Fixes: e86c59b1b12d ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: Kirill Tkhai <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Andrea Arcangeli <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: zhong jiang <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There's a typo in recent change of VM_MPX definition. We want it to be
VM_HIGH_ARCH_4, not VM_HIGH_ARCH_BIT_4.
This bug does cause visible regressions. In arch_vma_name the vmflags
are tested against VM_MPX. With the incorrect value of VM_MPX, a number
of vmas (such as the stack) test positive and end up being marked as
"[mpx]" in /proc/N/maps instead of their correct names.
This confuses tools like rr which expect to be able to find familiar
vmas.
Fixes: df3735c5b40f ("x86,mpx: make mpx depend on x86-64 to free up VMA flag")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Kirill A. Shutemov <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Kyle Huey <[email protected]>
Cc: <[email protected]> [4.14+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Here are some of the more spelling mistakes and typos that I've found
while fixing up spelling mistakes in kernel error message text over the
past eight weeks.
[[email protected]: s/|/||/, per Joe]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Ross Zwisler <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This parameter is named kp, so the documentation should use that.
Fixes: 9b473de87209 ("param: Fix duplicate module prefixes")
Link: http://lkml.kernel.org/r/20170919142656.64aea59e@endymion
Signed-off-by: Jean Delvare <[email protected]>
Acked-by: Rusty Russell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The build of alpha allmodconfig is giving error:
arch/alpha/include/asm/mmu_context.h: In function 'ev5_switch_mm':
arch/alpha/include/asm/mmu_context.h:160:2: error:
implicit declaration of function 'task_thread_info';
did you mean 'init_thread_info'? [-Werror=implicit-function-declaration]
The file 'mmu_context.h' needed an extra header file.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Sudip Mukherjee <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
- bpf prog_array just like all other types of bpf array accepts 32-bit index.
Clarify that in the comment.
- fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes
- tighten corresponding check in the interpreter to stay consistent
The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag
in commit 96eabe7a40aa in 4.14. Before that the map_flags would stay zero and
though JIT code is wrong it will check bounds correctly.
Hence two fixes tags. All other JITs don't have this problem.
Signed-off-by: Alexei Starovoitov <[email protected]>
Fixes: 96eabe7a40aa ("bpf: Allow selecting numa node during map creation")
Fixes: b52f00e6a715 ("x86: bpf_jit: implement bpf_tail_call() helper")
Acked-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add constants and callback functions for the dwmac on rk3128 soc.
As can be seen, the base structure is the same, only registers
and the bits in them moved slightly.
Signed-off-by: David Wu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In blk_mq_debugfs_register(), I remembered to set up the per-hctx sched
directories if a default scheduler was already configured by
blk_mq_sched_init() from blk_mq_init_allocated_queue(), but I didn't do
the same for the device-wide sched directory. Fix it.
Fixes: d332ce091813 ("blk-mq-debugfs: allow schedulers to register debugfs attributes")
Signed-off-by: Omar Sandoval <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
A recent commit made null_blk depend on configfs, which is kind of
annoying since you now have to find this dependency and enable that
as well. Discovered this since I no longer had null_blk available
on a box I needed to debug, since it got killed when the config
updated after the configfs change was merged.
Fixes: 3bf2bd20734e ("nullb: add configfs interface")
Reviewed-by: Shaohua Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
There is a case which will lead to io stall. The case is described as
follows.
/test1
|-subtest1
/test2
|-subtest2
And subtest1 and subtest2 each has 32 queued bios already.
Now upgrade to max. In throtl_upgrade_state, it will try to dispatch
bios as follows:
1) tg=subtest1, do nothing;
2) tg=test1, transfer 32 queued bios from subtest1 to test1; no pending
left, no need to schedule next dispatch;
3) tg=subtest2, do nothing;
4) tg=test2, transfer 32 queued bios from subtest2 to test2; no pending
left, no need to schedule next dispatch;
5) tg=/, transfer 8 queued bios from test1 to /, 8 queued bios from
test2 to /, 8 queued bios from test1 to /, and 8 queued bios from test2
to /; note that test1 and test2 each still has 16 queued bios left;
6) tg=/, try to schedule next dispatch, but since disptime is now
(update in tg_update_disptime, wait=0), pending timer is not scheduled
in fact;
7) In throtl_upgrade_state it totally dispatches 32 queued bios and with
32 left. test1 and test2 each has 16 queued bios;
8) throtl_pending_timer_fn sees the left over bios, but could do
nothing, because throtl_select_dispatch returns 0, and test1/test2 has
no pending tg.
The blktrace shows the following:
8,32 0 0 2.539007641 0 m N throtl upgrade to max
8,32 0 0 2.539072267 0 m N throtl /test2 dispatch nr_queued=16 read=0 write=16
8,32 7 0 2.539077142 0 m N throtl /test1 dispatch nr_queued=16 read=0 write=16
So force schedule dispatch if there are pending children.
Reviewed-by: Shaohua Li <[email protected]>
Signed-off-by: Joseph Qi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Treat the ef/04/01 interface class/subclass/protocol combination used
by the Novatel Verizon USB730L (1410:9030) as a possible RNDIS
interface.
T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 3
P: Vendor=1410 ProdID=9030 Rev=03.10
S: Manufacturer=Novatel Wireless
S: Product=MiFi USB730L
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
Once the network interface is brought up, the user just needs to run a
DHCP client to get IP address and routing setup.
As a side note, other Novatel Verizon USB730L models with the same
vid:pid end up exposing a standard ECM interface which doesn't require
any other kernel update to make it work.
Signed-off-by: Aleksander Morgado <[email protected]>
Reviewed-by: Bjørn Mork <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.
This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.
Cc: Ville Syrjala <[email protected]>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit e19c1eb885ac4186e64c7e484424124f3145318e)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
We used to assign IRQs for all devices at boot-time, before any drivers
claimed devices. The following commits:
30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
changed this so we now call pci_assign_irq() from pci_device_probe() when
we call a driver's probe method.
The ide_scan_pcibus() path (enabled by CONFIG_IDEPCI_PCIBUS_ORDER) bypasses
pci_device_probe() so it can guarantee devices are claimed in order of PCI
bus address. It calls the driver's probe method directly, so it misses the
pci_assign_irq() call (and other PCI initialization functions), which
causes failures like this:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
ide_generic: please use "probe_mask=0x3f" module parameter for probing
all legacy ISA IDE ports
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
sysfs: cannot create duplicate filename '/class/ide_port/ide0'
...
Trace:
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
[<fffffc00005b9d64>] device_add+0x2a4/0x7c0
[<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
[<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
[<fffffc00005ba690>] device_create+0x50/0x70
[<fffffc00005df36c>] ide_host_register+0x48c/0xa00
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005ba2a0>] device_register+0x20/0x50
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005df944>] ide_host_add+0x64/0xe0
[<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
[<fffffc0000310288>] do_one_initcall+0x68/0x260
[<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
...
---[ end trace 24a70433c3e4d374 ]---
ide0: disabling port
Fix the IRQ allocation issue by calling pci_assign_irq() from
ide_scan_pcidev() before probing the IDE PCI drivers, so that IRQs for a
given PCI device are allocated for the IDE PCI drivers to use them for
device configuration.
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: David S. Miller <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
|
|
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
PCI BARs on PCI IDE host initialization failure:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
Fix the problem by adding missing freeing of PCI BARs to
ide_setup_pci_controller() and ide_pci_init_two().
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
|
|
Recent pci_assign_irq() changes uncovered a problem with missing freeing of
ide_port class instance on hwif_init() failure in ide_host_register():
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x94/0xd0
sysfs: cannot create duplicate filename '/class/ide_port/ide0'
...
Trace:
[<fffffc00003308a0>] __warn+0x160/0x190
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000330928>] warn_slowpath_fmt+0x58/0x70
[<fffffc000048c9f4>] sysfs_warn_dup+0x94/0xd0
[<fffffc0000486d40>] kernfs_path_from_node+0x30/0x60
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc00004874ac>] kernfs_put+0x16c/0x2c0
[<fffffc000048d010>] sysfs_do_create_link_sd.isra.2+0x100/0x120
[<fffffc00005b9d64>] device_add+0x2a4/0x7c0
[<fffffc00005ba5cc>] device_create_groups_vargs+0x14c/0x170
[<fffffc00005ba518>] device_create_groups_vargs+0x98/0x170
[<fffffc00005ba690>] device_create+0x50/0x70
[<fffffc00005df36c>] ide_host_register+0x48c/0xa00
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005ba2a0>] device_register+0x20/0x50
[<fffffc00005df330>] ide_host_register+0x450/0xa00
[<fffffc00005df944>] ide_host_add+0x64/0xe0
[<fffffc000079b41c>] kobject_uevent_env+0x16c/0x710
[<fffffc0000310288>] do_one_initcall+0x68/0x260
[<fffffc00007b13bc>] kernel_init+0x1c/0x1a0
[<fffffc00007b13a0>] kernel_init+0x0/0x1a0
[<fffffc0000311868>] ret_from_kernel_thread+0x18/0x20
[<fffffc00007b13a0>] kernel_init+0x0/0x1a0
---[ end trace 24a70433c3e4d374 ]---
ide0: disabling port
Fix the problem by adding missing code to ide_host_register().
Fixes: 30fdfb929e82 ("PCI: Add a call to pci_assign_irq() in pci_device_probe()")
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Guenter Roeck <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
[bhelgaas: add Fixes:]
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
|
|
[email protected] becomes [email protected], because
sourceforge is just a spamtrap these days.
Signed-off-by: Wouter Verhelst <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixlet from Tejun Heo:
"Minor documentation update"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
Documentation: core-api: minor workqueue.rst cleanups
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"The recent migration code updates assumed that migrations always
execute from the top to the bottom once and didn't clean up internal
states after each migration round; however, cgroup_transfer_tasks()
repeats the inner steps multiple times and the garbage internal states
from the previous iteration led to OOPS.
Waiman fixed the bug by reinitializing the relevant states at the end
of each migration round"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Reinit cgroup_taskset structure before cgroup_migrate_execute() returns
|
|
When RTM_GETSTATS was added the fields of its header struct were not all
initialized when returning the result thus leaking 4 bytes of information
to user-space per rtnl_fill_statsinfo call, so initialize them now. Thanks
to Alexander Potapenko for the detailed report and bisection.
Reported-by: Alexander Potapenko <[email protected]>
Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Roopa Prabhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu fixes from Tejun Heo:
"Rather important fixes this time.
- The new percpu area allocator had a subtle bug in how it iterates
the memory regions and could skip viable areas, which led to
allocation failures for module static percpu variables. Dennis
fixed the bug and another non-critical one in stat calculation.
- Mark noticed that the generic implementations of percpu local
atomic reads aren't properly protected against irqs and there's a
(slim) chance for split reads on some 32bit systems. Generic
implementations are updated to disable irq when read size is larger
than ulong size. This may have made some 32bit archs which can do
atomic local 64bit accesses generate sub-optimal code. We need to
find them out and implement arch-specific overrides"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: fix iteration to prevent skipping over block
percpu: fix starting offset for chunk statistics traversal
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Nothing too interesting.
Arnd's gcc-7 warning fixes that slipped through the cracks for two
release cycles (my bad), and two minor low level driver updates"
* 'for-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: don't ignore result code of ahci_reset_controller()
ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs
ata: avoid gcc-7 warning in ata_timing_quantize
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for 4.14-rc4 to resolved reported
issues.
There's a bunch of stuff in here based on the great work Andrey
Konovalov is doing in fuzzing the USB stack. Lots of bug fixes when
dealing with corrupted USB descriptors that we've never seen in
"normal" operation, but is now ensuring the stack is much more
hardened overall.
There's also the usual XHCI and gadget driver fixes as well, and a
build error fix, and a few other minor things, full details in the
shortlog.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (38 commits)
usb: dwc3: of-simple: Add compatible for Spreadtrum SC9860 platform
usb: gadget: udc: atmel: set vbus irqflags explicitly
usb: gadget: ffs: handle I/O completion in-order
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
USB: dummy-hcd: Fix erroneous synchronization change
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: fix connection failures (wrong speed)
USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
USB: devio: Don't corrupt user memory
USB: devio: Prevent integer overflow in proc_do_submiturb()
USB: g_mass_storage: Fix deadlock when driver is unbound
USB: gadgetfs: Fix crash caused by inadequate synchronization
USB: gadgetfs: fix copy_to_user while holding spinlock
USB: uas: fix bug in handling of alternate settings
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a small number (5) of patches for some reported TTY and
serial issues. Nothing major, a documentation update, timing fix,
error handling fix, name reporting fix, and a timeout issue resolved.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sccnxp: Fix error handling in sccnxp_probe()
tty: serial: lpuart: avoid report NULL interrupt
serial: bcm63xx: fix timing issue.
mxser: fix timeout calculation for low rates
serial: sh-sci: document R8A77970 bindings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are some small staging/IIO driver fixes for 4.14-rc4
Most of these have been in my tree for a while due to travels, sorry
for the delay. They resolve a number of small issues reported by
people, mostly for the iio drivers. Nothing major in here, full
details are in the shortlog.
All have been linux-next for a few weeks with no reported issues"
* tag 'staging-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: core: Return error for failed read_reg
iio: ad7793: Fix the serial interface reset
iio: ad_sigma_delta: Implement a dedicated reset function
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
iio: adc: mcp320x: Fix readout of negative voltages
iio: adc: mcp320x: Fix oops on module unload
iio: adc: stm32: fix bad error check on max_channels
iio: trigger: stm32-timer: fix a corner case to write preset
iio: trigger: stm32-timer: preset shouldn't be buffered
iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030_madc_probe()'
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
staging: rtl8723bs: avoid null pointer dereference on pmlmepriv
staging: rtl8723bs: add missing range check on id
staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist
staging: speakup: fix speakup-r empty line lockup
staging: pi433: Move limit check to switch default to kill warning
staging: r8822be: fix null pointer dereferences with a null driver_adapter
staging: mt29f_spinand: Enable the read ECC before program the page
...
|