aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-09-18arm64: relax assembly code alignment from 16 byte to 4 byteMasahiro Yamada1-2/+2
Aarch64 instructions must be word aligned. The current 16 byte alignment is more than enough. Relax it into 4 byte alignment. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2017-09-18arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernelsDave Martin1-0/+4
__efi_fpsimd_begin()/__efi_fpsimd_end() are for use when making EFI calls only, so using them in non-EFI kernels is not allowed. This patch compiles them out if CONFIG_EFI is not set. Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Dave Martin <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2017-09-18mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe()Christophe JAILLET1-1/+2
If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock. Fixes: 4d26f012ab59 ("mtd: nand: lpc32xx_mlc: Handle return value of clk_prepare_enable.") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2017-09-18mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp()Cyrille Pitchen1-3/+33
spi_nor_read_sfdp() calls nor->read() to read the SFDP data. When the m25p80 driver is used (pretty common case), nor->read() is then implemented by the m25p80_read() function, which is likely to initialize a 'struct spi_transfer' from its buf argument before appending this structure inside the 'struct spi_message' argument of spi_sync(). Besides the SPI sub-system states that both .tx_buf and .rx_buf members of 'struct spi_transfer' must point into dma-safe memory. However, two of the three calls of spi_nor_read_sfdp() were given pointers to stack allocated memory as buf argument, hence not in a dma-safe area. Hopefully, the third and last call of spi_nor_read_sfdp() was already given a kmalloc'ed buffer argument, hence dma-safe. So this patch fixes this issue by introducing a spi_nor_read_sfdp_dma_unsafe() function which simply wraps the existing spi_nor_read_sfdp() function and uses some kmalloc'ed memory as a bounce buffer. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Cyrille Pitchen <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2017-09-18mtd: spi-nor: Check consistency of the memory size extracted from the SFDPBoris Brezillon1-0/+9
One field of the flash parameter table contains information about the flash device size. Most of the time the data extracted from this field is valid, but sometimes the BFPT section of the SFDP table is corrupted or invalid and this field is set to 0xffffffff, thus resulting in an integer overflow when setting params->size. Since NOR devices are anayway always smaller than 2^64 bytes, we can easily stop the BFPT parsing if the size reported in this table is invalid. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Acked-by: Cyrille Pitchen <[email protected]>
2017-09-18clocksource/integrator: Fix section mismatch warningArnd Bergmann1-2/+2
gcc-4.6 and older fail to inline integrator_clocksource_init, so they end up showing a harmless warning: WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init() The function integrator_clocksource_init() references the function __init clocksource_mmio_init(). This is often because integrator_clocksource_init lacks a __init annotation or the annotation of clocksource_mmio_init is wrong. Add the missing __init annotation that makes it build cleanly with all compilers. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Daniel Lezcano <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2017-09-18Merge tag 'drm-amdkfd-next-2017-09-02' of ↵Dave Airlie3-88/+87
git://people.freedesktop.org/~gabbayo/linux into drm-fixes some trivial amdkfd cleanups * tag 'drm-amdkfd-next-2017-09-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
2017-09-17Update version of cifs moduleSteve French1-1/+1
Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2017-09-17cifs: hide unused functionsArnd Bergmann1-0/+2
The newly added SMB2+ attribute support causes unused function warnings when CONFIG_CIFS_XATTR is disabled: fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function] smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function] smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon, This adds another #ifdef around the affected functions. Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+") Fixes: 95907fea4fd8 ("cifs: Add support for reading attributes on SMB2+") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Steve French <[email protected]>
2017-09-17SMB3: Add support for multidialect negotiate (SMB2.1 and later)Steve French5-18/+139
With the need to discourage use of less secure dialect, SMB1 (CIFS), we temporarily upgraded the dialect to SMB3 in 4.13, but since there are various servers which only support SMB2.1 (2.1 is more secure than CIFS/SMB1) but not optimal for a default dialect - add support for multidialect negotiation. cifs.ko will now request SMB2.1 or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will pick the latest most secure one it can support. In addition since we are sending multidialect negotiate, add support for secure negotiate to validate that a man in the middle didn't downgrade us. Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]> # 4.13+
2017-09-17arm64/syscalls: Move address limit check in loopThomas Garnier1-3/+3
A bug was reported on ARM where set_fs might be called after it was checked on the work pending function. ARM64 is not affected by this bug but has a similar construct. In order to avoid any similar problems in the future, the addr_limit_user_check function is moved at the beginning of the loop. Fixes: cf7de27ab351 ("arm64/syscalls: Check address limit on user-mode return") Reported-by: Leonard Crestez <[email protected]> Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17arm/syscalls: Optimize address limit checkThomas Garnier2-0/+18
Disable the generic address limit check in favor of an architecture specific optimized implementation. The generic implementation using pending work flags did not work well with ARM and alignment faults. The address limit is checked on each syscall return path to user-mode path as well as the irq user-mode return function. If the address limit was changed, a function is called to report data corruption (stopping the kernel or process based on configuration). The address limit check has to be done before any pending work because they can reset the address limit and the process is killed using a SIGKILL signal. For example the lkdtm address limit check does not work because the signal to kill the process will reset the user-mode address limit. Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Tested-by: Kees Cook <[email protected]> Tested-by: Leonard Crestez <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17Revert "arm/syscalls: Check address limit on user-mode return"Thomas Garnier4-23/+8
This reverts commit 73ac5d6a2b6ac3ae8d1e1818f3e9946f97489bc9. The work pending loop can call set_fs after addr_limit_user_check removed the _TIF_FSCHECK flag. This may happen at anytime based on how ARM handles alignment exceptions. It leads to an infinite loop condition. After discussion, it has been agreed that the generic approach is not tailored to the ARM architecture and any fix might not be complete. This patch will be replaced by an architecture specific implementation. The work flag approach will be kept for other architectures. Reported-by: Leonard Crestez <[email protected]> Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_checkThomas Garnier1-4/+8
Use CHECK_DATA_CORRUPTION instead of BUG_ON to provide more flexibility on address limit failures. By default, send a SIGKILL signal to kill the current process preventing exploitation of a bad address limit. Make the TIF_FSCHECK flag optional so ARM can use this function. Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUsAndy Lutomirski1-6/+7
For unknown historical reasons (i.e. Borislav doesn't recall), 32-bit kernels invoke cpu_init() on secondary CPUs with initial_page_table loaded into CR3. Then they set current->active_mm to &init_mm and call enter_lazy_tlb() before fixing CR3. This means that the x86 TLB code gets invoked while CR3 is inconsistent, and, with the improved PCID sanity checks I added, we warn. Fix it by loading swapper_pg_dir (i.e. init_mm.pgd) earlier. Reported-by: Paul Menzel <[email protected]> Reported-by: Pavel Machek <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 72c0098d92ce ("x86/mm: Reinitialize TLB state on hotplug and resume") Link: http://lkml.kernel.org/r/30cdfea504682ba3b9012e77717800a91c22097f.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlierAndy Lutomirski2-8/+8
Otherwise we might have the PCID feature bit set during cpu_init(). This is just for robustness. I haven't seen any actual bugs here. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels") Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware codeAndy Lutomirski1-2/+19
Putting the logical ASID into CR3's PCID bits directly means that we have two cases to consider separately: ASID == 0 and ASID != 0. This means that bugs that only hit in one of these cases trigger nondeterministically. There were some bugs like this in the past, and I think there's still one in current kernels. In particular, we have a number of ASID-unware code paths that save CR3, write some special value, and then restore CR3. This includes suspend/resume, hibernate, kexec, EFI, and maybe other things I've missed. This is currently dangerous: if ASID != 0, then this code sequence will leave garbage in the TLB tagged for ASID 0. We could potentially see corruption when switching back to ASID 0. In principle, an initialize_tlbstate_and_flush() call after these sequences would solve the problem, but EFI, at least, does not call this. (And it probably shouldn't -- initialize_tlbstate_and_flush() is rather expensive.) Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm: Factor out CR3-building codeAndy Lutomirski2-10/+16
Current, the code that assembles a value to load into CR3 is open-coded everywhere. Factor it out into helpers build_cr3() and build_cr3_noflush(). This makes one semantic change: __get_current_cr3_fast() was wrong on SME systems. No one noticed because the only caller is in the VMX code, and there are no CPUs with both SME and VMX. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tom Lendacky <[email protected]> Link: http://lkml.kernel.org/r/ce350cf11e93e2842d14d0b95b0199c7d881f527.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17CIFS/SMB3: Update documentation to reflect SMB3 and various changesSteve French4-91/+91
Signed-off-by: Steve French <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2017-09-17dma-coherent: fix rmem_dma_device_init regressionArnd Bergmann1-10/+9
My recent bug fix introduced another bug, which caused rmem_dma_device_init to always fail, as rmem->priv is never set to anything. This restores the previous behavior, calling dma_init_coherent_memory() whenever ->priv is NULL. Fixes: d35b0996fef3 ("dma-coherent: fix dma_declare_coherent_memory() logic error") Reported-by: Roy Pledge <[email protected]> Tested-by: Roy Pledge <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2017-09-17Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-13/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Thomas Gleixner: - A fix for a user space regression in /proc/$PID/stat - A couple of objtool fixes: ~ Plug a memory leak ~ Avoid accessing empty sections which upsets certain binutil versions ~ Prevent corrupting the obj file when section sizes did not change * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc: Report eip/esp in /prod/PID/stat for coredumping objtool: Fix object file corruption objtool: Do not retrieve data from empty sections objtool: Fix memory leak in elf_create_rela_section()
2017-09-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix for an off by one error in a cpumask result comparison" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix cpumask check in __irq_startup_managed()
2017-09-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix addressing the missing CP8 feature bit in CPUID for a range of AMD ZEN models/mask revisions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/AMD: Fix erratum 1076 (CPB bit)
2017-09-16Linux 4.14-rc1Linus Torvalds1-2/+2
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds14-27/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-234/+467
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds12-11/+380
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16genirq: Fix cpumask check in __irq_startup_managed()Thomas Gleixner1-1/+1
The result of cpumask_any_and() is invalid when result greater or equal nr_cpu_ids. The current check is checking for greater only. Fix it. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Signed-off-by: Thomas Gleixner <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Tony Luck <[email protected]> Cc: Chen Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Alok Kataria <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: [email protected] Cc: Paolo Bonzini <[email protected]> Cc: Rui Zhang <[email protected]> Cc: "K. Y. Srinivasan" <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Dan Williams <[email protected]> Cc: Len Brown <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf4-5/+71
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <[email protected]> Acked-by: Greg K-H <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel1-1/+2
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Andreas Rammhold <[email protected]> Reported-by: Florian Klink <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-16Documentation: link in networking docsPavel Machek1-1/+1
Fix link in filter.txt. Acked-by: Pavel Machek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-16tcp: fix data delivery rateEric Dumazet1-4/+3
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds205-3427/+6399
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge tag 'pci-v4.14-fixes-1' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
2017-09-15Merge tag 'drm-fixes-for-v4.14-rc1' of ↵Linus Torvalds28-160/+236
git://people.freedesktop.org/~airlied/linux Pull drm AMD fixes from Dave Airlie: "Just had a single AMD fixes pull from Alex for rc1" * tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2" drm/amdgpu: remove duplicate return statement drm/amdgpu: check memory allocation failure drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2) drm/amdgpu: inline amdgpu_ttm_do_bind again drm/amdgpu: fix amdgpu_ttm_bind drm/amdgpu: remove the GART copy hack drm/ttm:fix wrong decoding of bo_count drm/ttm: fix missing inc bo_count drm/amdgpu: set sched_hw_submission higher for KIQ (v3) drm/amdgpu: move default gart size setting into gmc modules drm/amdgpu: refine default gart size drm/amd/powerplay: ACG frequency added in PPTable drm/amdgpu: discard commands of killed processes drm/amdgpu: fix and cleanup shadow handling drm/amdgpu: add automatic per asic settings for gart_size drm/amdgpu/gfx8: fix spelling typo in mqd allocation drm/amd/powerplay: unhalt mec after loading drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately drm/amdgpu: Fix huge page updates with CPU
2017-09-15Merge branch 'i2c/for-next' of ↵Linus Torvalds9-14/+1602
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "I2C has two more new drivers: Altera FPGA and STM32F7" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: add driver i2c: i2c-stm32f4: use generic definition of speed enum dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings i2c: altera: Add Altera I2C Controller driver dt-bindings: i2c: Add Altera I2C Controller
2017-09-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds18-111/+257
Pull more KVM updates from Paolo Bonzini: - PPC bugfixes - RCU splat fix - swait races fix - pointless userspace-triggerable BUG() fix - misc fixes for KVM_RUN corner cases - nested virt correctness fixes + one host DoS - some cleanups - clang build fix - fix AMD AVIC with default QEMU command line options - x86 bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits) kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry kvm,mips: Fix potential swait_active() races kvm,powerpc: Serialize wq active checks in ops->vcpu_kick kvm: Serialize wq active checks in kvm_vcpu_wake_up() kvm,x86: Fix apf_task_wake_one() wq serialization kvm,lapic: Justify use of swait_active() kvm,async_pf: Use swq_has_sleeper() sched/wait: Add swq_has_sleeper() KVM: VMX: Do not BUG() on out-of-bounds guest IRQ KVM: Don't accept obviously wrong gsi values via KVM_IRQFD kvm: nVMX: Don't allow L2 to access the hardware CR8 KVM: trace events: update list of exit reasons KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously KVM: X86: Don't block vCPU if there is pending exception KVM: SVM: Add irqchip_split() checks before enabling AVIC KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv() KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu() KVM: x86: fix clang build ...
2017-09-15bpf/verifier: reject BPF_ALU64|BPF_ENDEdward Cree2-1/+18
Neither ___bpf_prog_run nor the JITs accept it. Also adds a new test case. Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Edward Cree <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long1-1/+0
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long3-39/+36
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15netvsc: increase default receive buffer sizeStephen Hemminger1-1/+1
The default receive buffer size was reduced by recent change to a value which was appropriate for 10G and Windows Server 2016. But the value is too small for full performance with 40G on Azure. Increase the default back to maximum supported by host. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15tcp: update skb->skb_mstamp more carefullyEric Dumazet1-7/+12
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <[email protected]> Reported-by: liujian <[email protected]> Acked-by: Neal Cardwell <[email protected]> Acked-by: Yuchung Cheng <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15fs/proc: Report eip/esp in /prod/PID/stat for coredumpingJohn Ogness1-0/+9
Commit 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in /proc/PID/stat") stopped reporting eip/esp because it is racy and dangerous for executing tasks. The comment adds: As far as I know, there are no use programs that make any material use of these fields, so just get rid of them. However, existing userspace core-dump-handler applications (for example, minicoredumper) are using these fields since they provide an excellent cross-platform interface to these valuable pointers. So that commit introduced a user space visible regression. Partially revert the change and make the readout possible for tasks with the proper permissions and only if the target task has the PF_DUMPCORE flag set. Fixes: 0a1eb2d474ed ("fs/proc: Stop reporting eip and esp in> /proc/PID/stat") Reported-by: Marco Felsch <[email protected]> Signed-off-by: John Ogness <[email protected]> Reviewed-by: Andy Lutomirski <[email protected]> Cc: Tycho Andersen <[email protected]> Cc: Kees Cook <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Brian Gerst <[email protected]> Cc: [email protected] Cc: Tetsuo Handa <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Al Viro <[email protected]> Cc: Linux API <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Linus Torvalds <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2017-09-15net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern1-2/+6
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15net: smsc911x: Quieten netif during suspendGeert Uytterhoeven1-1/+14
If the network interface is kept running during suspend, the net core may call net_device_ops.ndo_start_xmit() while the Ethernet device is still suspended, which may lead to a system crash. E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is driven by a PM controlled clock. If the Ethernet registers are accessed while the clock is not running, the system will crash with an imprecise external abort. As this is a race condition with a small time window, it is not so easy to trigger at will. Using pm_test may increase your chances: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # echo mem > /sys/power/state To fix this, make sure the network interface is quietened during suspend. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15net: systemport: Fix 64-bit stats deadlockFlorian Fainelli1-3/+0
We can enter a deadlock situation because there is no sufficient protection when ndo_get_stats64() runs in process context to guard against RX or TX NAPI contexts running in softirq, this can lead to the following lockdep splat and actual deadlock was experienced as well with an iperf session in the background and a while loop doing ifconfig + ethtool. [ 5.780350] ================================ [ 5.784679] WARNING: inconsistent lock state [ 5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted [ 5.794561] -------------------------------- [ 5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 5.810175] (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54 [ 5.818327] {SOFTIRQ-ON-W} state was registered at: [ 5.823278] bcm_sysport_get_stats64+0x17c/0x258 [ 5.828053] dev_get_stats+0x38/0xac [ 5.831776] rtnl_fill_stats+0x30/0x118 [ 5.835761] rtnl_fill_ifinfo+0x538/0xe24 [ 5.839921] rtmsg_ifinfo_build_skb+0x6c/0xd8 [ 5.844430] rtmsg_ifinfo_event.part.5+0x14/0x44 [ 5.849201] rtmsg_ifinfo+0x20/0x28 [ 5.852837] register_netdevice+0x628/0x6b8 [ 5.857171] register_netdev+0x14/0x24 [ 5.861051] bcm_sysport_probe+0x30c/0x438 [ 5.865280] platform_drv_probe+0x50/0xb0 [ 5.869418] driver_probe_device+0x2e8/0x450 [ 5.873817] __driver_attach+0x104/0x120 [ 5.877871] bus_for_each_dev+0x7c/0xc0 [ 5.881834] bus_add_driver+0x1b0/0x270 [ 5.885797] driver_register+0x78/0xf4 [ 5.889675] do_one_initcall+0x54/0x190 [ 5.893646] kernel_init_freeable+0x144/0x1d0 [ 5.898135] kernel_init+0x8/0x110 [ 5.901665] ret_from_fork+0x14/0x2c [ 5.905363] irq event stamp: 24263 [ 5.908804] hardirqs last enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4 [ 5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98 [ 5.925143] softirqs last enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98 [ 5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c [ 5.939985] [ 5.939985] other info that might help us debug this: [ 5.946576] Possible unsafe locking scenario: [ 5.946576] [ 5.952556] CPU0 [ 5.955031] ---- [ 5.957506] lock(&syncp->seq#2); [ 5.960955] <Interrupt> [ 5.963604] lock(&syncp->seq#2); [ 5.967227] [ 5.967227] *** DEADLOCK *** [ 5.967227] [ 5.973222] 1 lock held by swapper/0/0: [ 5.977092] #0: (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54 So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64() since it does not appear to be useful for anything. No inconsistency was observed with either ifconfig or ethtool, global TX counts equal the sum of per-queue TX counts on a 32-bit architecture. Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15net: vrf: avoid gcc-4.6 warningArnd Bergmann1-3/+3
When building an allmodconfig kernel with gcc-4.6, we get a rather odd warning: drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’: drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror] drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror] I have no idea what this warning is even trying to say, but it does seem like a false positive. Reordering the initialization in to match the structure definition gets rid of the warning, and might also avoid whatever gcc thinks is wrong here. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15qed: remove unnecessary call to memsetHimanshu Jha1-1/+0
call to memset to assign 0 value immediately after allocating memory with kzalloc is unnecesaary as kzalloc allocates the memory filled with 0 value. Semantic patch used to resolve this issue: @@ expression e,e2; constant c; statement S; @@ e = kzalloc(e2, c); if(e == NULL) S - memset(e, 0, e2); Signed-off-by: Himanshu Jha <[email protected]> Signed-off-by: Himanshu Jha <[email protected]> Acked-by: Sudarsana Kalluru <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15Merge tag 'firmware_removal-4.14-rc1' of ↵Linus Torvalds153-129170/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull firmware removal from Greg KH: "Many many years ago (at the kernel summit in Boston), we all came to the agreement that the firmware/ tree should be dropped from the kernel, and everyone use the linux-firmware package instead. For some minor reason, David Woodhouse didn't send the pull request at that point in time, and everyone forgot about this. The topic came up in the hallway track at the Plumbers conference this week, so here's a single patch that drops the whole firmware tree. The last firmware update was back in 2013, and all distros have been using linux-firmware instead since at least that year, if not before. The only commits to that directory since 2013 was some kbuild fixups for various build tool issues. So lets finally drop this, we don't need to lug them around in the kernel source tree anymore, especially as no one wants or uses them. This has passed build testing with 0-day, I don't think it made it into linux-next this week, but I figured it was good to get in before 4.14-rc1 was out" * tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: delete in-kernel firmware
Powered by cgit, Gruvboxed by Blaster4385.