aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-11-05drm/exynos/fbdev: do not skip fbdev init if there are no connectorsAndrzej Hajda1-1/+1
Since connectors can be created dynamically, fbdev should be initialized even if there are no connectors at the moment. Otherwise fbdev will not be created even after connector's appearance. The patch fixes lack of fbdev on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-05drm/exynos/dsi: register connector if it is created after drm bindAndrzej Hajda1-2/+8
DSI device can be attached after DRM device is registered. In such case newly created connector must be registered by exynos_dsi. The patch fixes exynos_drm on rinato and trats boards. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Reported-by: Marek Szyprowski <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-05Revert "drm/exynos/decon5433: implement frame counter"Inki Dae3-21/+0
This reverts commit 0586feba322e1de05075700eb4b835c8b683e62b This patch makes it to need get_vblank_counter callback in crtc to get frame counter from decon driver. However, drm_dev->max_vblank_count is a member unique to vendor's DRM driver but in case of ARM DRM, some CRTC devices don't provide the frame counter value. As a result, this patch made extension and clone mode not working. Instead of this patch, we may need separated max_vblank_count which belongs to each CRTC device, or need to implement frame counter emulation for them who don't support HW frame counter. Signed-off-by: Inki Dae <[email protected]>
2018-11-05drm/exynos: checking for NULL instead of IS_ERR()Dan Carpenter1-1/+3
The of_drm_find_panel() function returns error pointers and never NULL but we the driver assumes that ->panel is NULL when it's not present. Fixes: 6afb7721e2a0 ("drm/exynos: move connector creation to attach callback") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-11-05Documentation/x86: Fix typo in zero-page.txtRandy Dunlap1-1/+1
Signed-off-by: Randy Dunlap <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-05resource/docs: Fix new kernel-doc warningsRandy Dunlap1-3/+7
The first group of warnings is caused by a "/**" kernel-doc notation marker but the function comments are not in kernel-doc format. Also add another error return value here. ../kernel/resource.c:337: warning: Function parameter or member 'start' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'end' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'flags' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'desc' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'first_lvl' not described in 'find_next_iomem_res' ../kernel/resource.c:337: warning: Function parameter or member 'res' not described in 'find_next_iomem_res' Add the missing function parameter documentation for the other warnings: ../kernel/resource.c:409: warning: Function parameter or member 'arg' not described in 'walk_iomem_res_desc' ../kernel/resource.c:409: warning: Function parameter or member 'func' not described in 'walk_iomem_res_desc' Signed-off-by: Randy Dunlap <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: b69c2e20f6e4 ("resource: Clean it up a bit") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-05sched/fair: Fix a comment in task_numa_fault()Yi Wang1-2/+2
Duplicated 'case it'. Signed-off-by: Yi Wang <[email protected]> Reviewed-by: Xi Xu <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-05ARM: dts: imx6sx-sdb: Fix enet phy regulatorLeonard Crestez1-1/+6
Bindings for "fixed-regulator" only explicitly support "gpio" property, not "gpios". Fix by correcting the property name. The enet PHYs on imx6sx-sdb needs to be explicitly reset after a power cycle, this can be handled by the phy-reset-gpios property. Sadly this is not handled on suspend: the fec driver turns phy-supply off but doesn't assert phy-reset-gpios again on resume. Since additional phy-level work is required to support powering off the phy in suspend fix the problem by just marking the regulator as "boot-on" "always-on" so that it's never turned off. This behavior is equivalent to older releases. Keep the phy-reset-gpios property on fec anyway because it is a correct description of board design. This issue was exposed by commit efdfeb079cc3 ("regulator: fixed: Convert to use GPIO descriptor only") which causes the "gpios" property to also be parsed. Before that commit the "gpios" property had no effect, PHY reset was only handled in the the bootloader. This fixes linux-next boot failures previously reported here: https://lore.kernel.org/patchwork/patch/982437/#1177900 https://lore.kernel.org/patchwork/patch/994091/#1178304 Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: fsl: Fix improperly quoted stdout-path valuesRob Herring2-3/+3
A quoted label reference doesn't expand to the node path and is taken as a literal string. Dropping the quotes can fix this unless the baudrate string is appended in which case we have to use the alias. At least on VF610, the problem was masked by setting the console in bootargs. Use the alias syntax with baudrate parameter so we can drop setting the console in bootargs. Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: Mark Rutland <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Reviewed-by: Stefan Agner <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6sll: fix typo for fsl,imx6sll-i2c nodeOleksij Rempel1-1/+1
Fix the type of compatible string "fs,imx6sll-i2c" which should be "fsl,imx6sll-i2c". Signed-off-by: Oleksij Rempel <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-04bonding/802.3ad: fix link_failure_count trackingJarod Wilson1-2/+2
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <[email protected]> CC: David S. Miller <[email protected]> CC: [email protected] CC: [email protected] Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-04net: phy: realtek: fix RTL8201F sysfs nameHolger Hoffstätte1-1/+1
Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-04hwmon: (ibmpowernv) Remove bogus __init annotationsGeert Uytterhoeven1-4/+3
If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2018-11-04hwmon: (core) Fix double-free in __hwmon_device_register()Dmitry Osipenko1-4/+4
Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24) [<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0) [<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250) [<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88) [<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200) [<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18) [<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294) [<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c) [<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8) [<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4) [<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578) [<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384) [<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4) [<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4) [<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c) [<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8) [<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c) [<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20) [<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec) [<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4) [<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c) [<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc) [<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240) [<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: <[email protected]> # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2018-11-04Linux 4.20-rc1Linus Torvalds1-2/+2
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds25-292/+2418
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds5-40/+17
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds7-0/+432
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-04x86/hyper-v: Enable PIT shutdown quirkMichael Kelley1-0/+11
Hyper-V emulation of the PIT has a quirk such that the normal PIT shutdown path doesn't work, because clearing the counter register restarts the timer. Disable the counter clearing on PIT shutdown. Signed-off-by: Michael Kelley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: vkuznets <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: KY Srinivasan <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-11-04clockevents/drivers/i8253: Add support for PIT shutdown quirkMichael Kelley2-2/+13
Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: vkuznets <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: KY Srinivasan <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-11-03sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long2-1/+2
According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03sctp: fix strchange_flags name for Stream Change EventXin Long1-0/+2
As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-13/+26
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix BPF prog kallsyms and bpf_prog_get_info_by_fd() jited address export to not use page start but actual start instead to work correctly with profiling e.g. finding hot instructions from stack traces. Also fix latter with regards to dumping address and jited len for !multi prog, from Song. 2) Fix bpf_prog_get_info_by_fd() for !root to zero info.nr_jited_func_lens instead of leaving the user provided length, from Daniel. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo1-1/+0
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELSArnd Bergmann1-1/+2
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03qed: fix link config error handlingArnd Bergmann1-2/+5
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds47-171/+198
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds102-539/+3616
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-04sched/core: Take the hotplug lock in sched_init_smp()Valentin Schneider1-1/+4
When running on linux-next (8c60c36d0b8c ("Add linux-next specific files for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g. Juno or HiKey960), we get the following report: [ 0.748225] Call trace: [ 0.750685] lockdep_assert_cpus_held+0x30/0x40 [ 0.755236] static_key_enable_cpuslocked+0x20/0xc8 [ 0.760137] build_sched_domains+0x1034/0x1108 [ 0.764601] sched_init_domains+0x68/0x90 [ 0.768628] sched_init_smp+0x30/0x80 [ 0.772309] kernel_init_freeable+0x278/0x51c [ 0.776685] kernel_init+0x10/0x108 [ 0.780190] ret_from_fork+0x10/0x18 The static_key in question is 'sched_asym_cpucapacity' introduced by commit: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations") In this particular case, we enable it because smp_prepare_cpus() will end up fetching the capacity-dmips-mhz entry from the devicetree, so we already have some asymmetry detected when entering sched_init_smp(). This didn't get detected in tip/sched/core because we were missing: commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") Calls to build_sched_domains() post sched_init_smp() will hold the hotplug lock, it just so happens that this very first call is a special case. As stated by a comment in sched_init_smp(), "There's no userspace yet to cause hotplug operations" so this is a harmless warning. However, to both respect the semantics of underlying callees and make lockdep happy, take the hotplug lock in sched_init_smp(). This also satisfies the comment atop sched_init_domains() that says "Callers must hold the hotplug lock". Reported-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-04x86/qspinlock: Fix compile errorPeter Zijlstra1-5/+8
With a compiler that has asm-goto but not asm-cc-output and CONFIG_PROFILE_ALL_BRANCHES=y we get a compiler error: arch/x86/include/asm/rmwcc.h:23:17: error: jump into statement expression Fix this by writing the if() as a boolean multiplication instead. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Fixes: 7aa54be29765 ("locking/qspinlock, x86: Provide liveness guarantee") Signed-off-by: Ingo Molnar <[email protected]>
2018-11-04sched/topology: Fix off by one bugPeter Zijlstra1-1/+1
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar4068-73501/+261778
Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin1-6/+4
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'net-bql-better-deal-with-GSO'David S. Miller3-3/+25
Eric Dumazet says: ==================== net: bql: better deal with GSO While BQL bulk dequeue works well for TSO packets, it is not very efficient as soon as GSO is involved. On a GSO only workload (UDP or TCP), this patch series can save about 8 % of cpu cycles on a 40Gbit mlx4 NIC, by keeping optimal batching, and avoiding expensive doorbells, qdisc requeues and reschedules. This patch series : - Add __netdev_tx_sent_queue() so that drivers can implement efficient BQL and xmit_more support. - Implement a work around in dev_hard_start_xmit() for drivers not using __netdev_tx_sent_queue() - changes mlx4 to use __netdev_tx_sent_queue() v2: Tariq and Willem feedback addressed. added __netdev_tx_sent_queue() (Willem suggestion) ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet1-2/+4
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <[email protected]> Cc: Tariq Toukan <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03net: do not abort bulk send on BQL statusEric Dumazet1-1/+1
Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03net: bql: add __netdev_tx_sent_queue()Eric Dumazet1-0/+20
When qdisc_run() tries to use BQL budget to bulk-dequeue a batch of packets, GSO can later transform this list in another list of skbs, and each skb is sent to device ndo_start_xmit(), one at a time, with skb->xmit_more being set to one but for last skb. Problem is that very often, BQL limit is hit in the middle of the packet train, forcing dev_hard_start_xmit() to stop the bulk send and requeue the end of the list. BQL role is to avoid head of line blocking, making sure a qdisc can deliver high priority packets before low priority ones. But there is no way requeued packets can be bypassed by fresh packets in the qdisc. Aborting the bulk send increases TX softirqs, and hot cache lines (after skb_segment()) are wasted. Note that for TSO packets, we never split a packet in the middle because of BQL limit being hit. Drivers should be able to update BQL counters without flipping/caring about BQL status, if the current skb has xmit_more set. Upper layers are ultimately responsible to stop sending another packet train when BQL limit is hit. Code template in a driver might look like the following : send_doorbell = __netdev_tx_sent_queue(tx_queue, nr_bytes, skb->xmit_more); Note that __netdev_tx_sent_queue() use is not mandatory, since following patch will change dev_hard_start_xmit() to not care about BQL status. But it is highly recommended so that xmit_more full benefits can be reached (less doorbells sent, and less atomic operations as well) Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03ext4: add missing brelse() update_backups()'s error pathVasily Averin1-1/+3
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 2.6.19
2018-11-03ext4: add missing brelse() add_new_gdb_meta_bg()'s error pathVasily Averin1-2/+1
Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 3.7
2018-11-03ext4: add missing brelse() in set_flexbg_block_bitmap()'s error pathVasily Averin1-2/+4
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Cc: [email protected] # 3.3 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2018-11-03ext4: avoid potential extra brelse in setup_new_flex_group_blocks() Vasily Averin1-6/+2
Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 3.3+
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds8-22/+35
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'arm64-upstream' of ↵Linus Torvalds3-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: - fix W+X page (mark RO) allocated by the arm64 kprobes code - Makefile fix for .i files in out of tree modules * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobe: make page to RO mode when allocate it arm64: kdump: fix small typo arm64: makefile fix build of .i file in external module case
2018-11-03Merge tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping fix from Christoph Hellwig: "Avoid compile warnings on non-default arm64 configs" * tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping: arm64: fix warnings without CONFIG_IOMMU_DMA
2018-11-03Merge tag 'kbuild-v4.20-2' of ↵Linus Torvalds17-78/+28
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03Merge tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-99/+530
Pull cifs fixes and updates from Steve French: "Three small fixes (one Kerberos related, one for stable, and another fixes an oops in xfstest 377), two helpful debugging improvements, three patches for cifs directio and some minor cleanup" * tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix signed/unsigned mismatch on aio_read patch cifs: don't dereference smb_file_target before null check CIFS: Add direct I/O functions to file_operations CIFS: Add support for direct I/O write CIFS: Add support for direct I/O read smb3: missing defines and structs for reparse point handling smb3: allow more detailed protocol info on open files for debugging smb3: on kerberos mount if server doesn't specify auth type use krb5 smb3: add trace point for tree connection cifs: fix spelling mistake, EACCESS -> EACCES cifs: fix return value for cifs_listxattr
2018-11-03Merge branch 's390-qeth-fixes'David S. Miller5-242/+207
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-11-02 please apply one round of qeth fixes for -net. Patch 1 is rather large and removes a use-after-free hazard from many of our debug trace entries. Patch 2 is yet another fix-up for the L3 subdriver's new IP address management code. Patch 3 and 4 resolve some fallout from the recent changes wrt how/when qeth allocates its net_device. Patch 5 makes sure we don't set reserved bits when building HW commands from user-provided data. And finally, patch 6 allows ethtool to play nice with new HW. ==================== Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.