aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-03Merge tag 'lkmm.2022.09.30a' of ↵Linus Torvalds2-92/+122
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull LKMM (Linux Kernel Memory Model) updates from Paul McKenney: "Several documentation updates" * tag 'lkmm.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: tools/memory-model: Clarify LKMM's limitations in litmus-tests.txt docs/memory-barriers.txt: Fixup long lines docs/memory-barriers.txt: Fix confusing name of 'data dependency barrier'
2022-10-03Merge tag 'nolibc.2022.09.30a' of ↵Linus Torvalds6-3/+900
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: "Most notably greatly improved testing. These tests are located in tools/testing/selftests/nolibc. The output of "make help" is as follows: Supported targets under selftests/nolibc: all call the "run" target below help this help sysroot create the nolibc sysroot here (uses $ARCH) nolibc-test build the executable (uses $CC and $CROSS_COMPILE) initramfs prepare the initramfs with nolibc-test defconfig create a fresh new default config (uses $ARCH) kernel (re)build the kernel with the initramfs (uses $ARCH) run runs the kernel in QEMU after building it (uses $ARCH, $TEST) rerun runs a previously prebuilt kernel in QEMU (uses $ARCH, $TEST) clean clean the sysroot, initramfs, build and output files The output file is "run.out". Test ranges may be passed using $TEST. Currently using the following variables: ARCH = x86 CROSS_COMPILE = CC = gcc OUTPUT = /home/git/linux-rcu/tools/testing/selftests/nolibc/ TEST = QEMU_ARCH = x86_64 [determined from $ARCH] IMAGE_NAME = bzImage [determined from $ARCH] The output of a successful x86 "make run" is currently as follows, with kernel build output omitted: $ make run 71 test(s) passed." * tag 'nolibc.2022.09.30a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: selftests/nolibc: Avoid generated files being committed selftests/nolibc: add a "help" target selftests/nolibc: "sysroot" target installs a local copy of the sysroot selftests/nolibc: add a "run" target to start the kernel in QEMU selftests/nolibc: add a "defconfig" target selftests/nolibc: add a "kernel" target to build the kernel with the initramfs selftests/nolibc: support glibc as well selftests/nolibc: condition some tests on /proc existence selftests/nolibc: recreate and populate /dev and /proc if missing selftests/nolibc: on x86, support exiting with isa-debug-exit selftests/nolibc: exit with poweroff on success when getpid() == 1 selftests/nolibc: add a few tests for some libc functions selftests/nolibc: implement a few tests for various syscalls selftests/nolibc: support a test definition format selftests/nolibc: add basic infrastructure to ease creation of nolibc tests tools/nolibc: make sys_mmap() automatically use the right __NR_mmap definition tools/nolibc: fix build warning in sys_mmap() when my_syscall6 is not defined tools/nolibc: make argc 32-bit in riscv startup code
2022-10-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds3-1/+7
Pull ARM fixes from Russell King: "Three fixes for ARM: - unbreak the RiscPC build - fix wrong pg_level in page table dumper - make MT_MEMORY_RO really read-only with LPAE" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd() ARM: 9243/1: riscpc: Unbreak the build
2022-10-03Merge tag 'm68k-for-v6.1-tag1' of ↵Linus Torvalds17-46/+50
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Fix forward secrecy of RNG seed boot record handling - Make RNG seed boot record handling generic for all m68k platforms using bootinfo - defconfig updates - Minor fixes and improvements * tag 'm68k-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Rework BI_VIRT_RNG_SEED as BI_RNG_SEED m68k: Process bootinfo records before saving them m68k: defconfig: Update defconfigs for v6.0-rc2 m68k: Allow kexec on M68KCLASSIC with MMU enabled only m68k: Move from strlcpy with unused retval to strscpy
2022-10-03Merge tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds73-414/+215
Pull MIPS updates from Thomas Bogendoerfer: - mainly cleanups - fix enabling interrupts on second VPE for Lantiq platform - switch to use gpiod API - allow firmware passing RND seed * tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits) MIPS: pci: lantiq: switch to using gpiod API mips: allow firmware to pass RNG seed to kernel MIPS: Simplify __bswapdi2() and __bswapsi2() MIPS: Silence missing prototype warning mips: update config files MIPS: Lantiq: vmmc: fix compile break introduced by gpiod patch MIPS: IRQ: remove orphan allocate_irqno() declaration MIPS: remove orphan sb1250_time_init() declaration MIPS: Lantiq: switch vmmc to use gpiod API MIPS: lantiq: enable all hardware interrupts on second VPE MIPS: BCM47XX: Cast memcmp() of function to (void *) mips: ralink: convert to DEFINE_SHOW_ATTRIBUTE mips: kernel: convert to DEFINE_SHOW_ATTRIBUTE mips: cavium: convert to DEFINE_SHOW_ATTRIBUTE MIPS: AR7: remove orphan declarations from arch/mips/include/asm/mach-ar7/ar7.h MIPS: remove orphan sni_cpu_time_init() declaration MIPS: IRQ: remove orphan declarations from arch/mips/include/asm/irq.h MIPS: Octeon: remove orphan octeon_hal_setup_reserved32() declaration MIPS: Octeon: remove orphan cvmx_fpa_setup_pool() declaration MIPS: Octeon: remove orphan octeon_swiotlb declaration ...
2022-10-03net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.cLorenzo Bianconi5-52/+106
Remove circular dependency between nf_nat module and nf_conntrack one moving bpf_ct_set_nat_info kfunc in nf_nat_bpf.c Fixes: 0fabd2aa199f ("net: netfilter: add bpf_ct_set_nat_info kfunc helper") Suggested-by: Kumar Kartikeya Dwivedi <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Tested-by: Yauheni Kaliuta <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/r/51a65513d2cda3eeb0754842e8025ab3966068d8.1664490511.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <[email protected]>
2022-10-03Documentation: bpf: Add implementation notes documentations to table of contentsBagas Sanjaya1-0/+2
Sphinx reported warnings on missing implementation notes documentations in the table of contents: Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree Add these documentations to the table of contents (index.rst) of BPF documentation to fix the warnings. Link: https://lore.kernel.org/linux-doc/[email protected]/ Fixes: 6c7aaffb24efbd ("bpf, docs: Move Clang notes to a separate file") Fixes: 6166da0a02cde2 ("bpf, docs: Move legacy packet instructions to a separate file") Reported-by: kernel test robot <[email protected]> Signed-off-by: Bagas Sanjaya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2022-10-03Merge tag 'asoc-v6.1' of ↵Takashi Iwai287-2330/+13386
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.1 This has been a very quiet release for the core but quite a busy one for drivers with a big crop of new drivers and lots of feature additions and fixes to existing ones: - A new string helper parse_int_array_user(). - Improvements to the SOF IPC4 code, especially around trace. - Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450 and Texas Instruments SRC4392 There is a conflict with the conversion of I2C remove functions to void in the cs42l42 driver which is fairly straightforward to resolve but should be highlighted to Linus.
2022-10-03once: add DO_ONCE_SLOW() for sleepable contextsEric Dumazet3-2/+60
Christophe Leroy reported a ~80ms latency spike happening at first TCP connect() time. This is because __inet_hash_connect() uses get_random_once() to populate a perturbation table which became quite big after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") get_random_once() uses DO_ONCE(), which block hard irqs for the duration of the operation. This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock for operations where we prefer to stay in process context. Then __inet_hash_connect() can use get_random_slow_once() to populate its perturbation table. Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time") Reported-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t Signed-off-by: Eric Dumazet <[email protected]> Cc: Willy Tarreau <[email protected]> Tested-by: Christophe Leroy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net/ieee802154: reject zero-sized raw_sendmsg()Tetsuo Handa1-0/+3
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154 socket. What commit dc633700f00f726e ("net/af_packet: check len when min_header_len equals to 0") does also applies to ieee802154 socket. Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 Reported-by: syzbot <[email protected]> Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by: Tetsuo Handa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: wwan: iosm: Call mutex_init before locking itMaxim Mikityanskiy1-2/+3
wwan_register_ops calls wwan_create_default_link, which ends up in the ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this mutex is not yet initialized by that point. Fix it by moving mutex_init above the wwan_register_ops call. This also makes the order of operations in ipc_wwan_init symmetric to ipc_wwan_deinit. Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03Merge branch 'octeontx2-macsec-offload'David S. Miller15-7/+6681
Subbaraya Sundeep says: ==================== net: Introduce macsec hardware offload for cn10k platform CN10K-B and CNF10K-B variaints of CN10K silicon has macsec block(MCS) to encrypt and decrypt packets at MAC/hardware level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. This patchset introduces macsec hardware offloading support. AF driver manages hardware resources and PF driver consumes them when macsec hardware offloading is needed. Patch 1 adds basic pci driver for both CN10K-B and CNF10K-B silicons and initializes hardware block. Patches 2 and 3 adds mailboxes to init, reset and manage resources of the MCS block Patch 4 adds a low priority rule in MCS TCAM so that the traffic which do not need macsec processing can be sent/received Patch 5 adds macsec stats collection support Patch 6 adds interrupt handling support and any event in which AF consumer is interested can be notified via mbox notification Patch 7 adds debugfs support which helps in debugging packet path Patch 8 introduces macsec hardware offload feature for PF netdev driver. v3 changes: Fixed clang and sparse warnings v2 changes: Fix build error by changing #ifdef CONFIG_MACSEC to #if IS_ENABLED(CONFIG_MACSEC) ==================== Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-pf: mcs: Introduce MACSEC hardware offloadingSubbaraya Sundeep5-0/+1776
This patch introduces the macsec offload feature to cn10k PF netdev driver. The macsec offload ops like adding, deleting and updating SecYs, SCs, SAs and stats are supported. XPN support will be added in later patches. Some stats use same counter in hardware which means based on the SecY mode the same counter represents different stat. Hence when SecY mode/policy is changed then snapshot of current stats are captured. Also there is no provision to specify the unique flow-id/SCI per packet to hardware hence different mac address needs to be set for macsec interfaces. Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Add debugfs supportGeetha sowjanya2-0/+350
This patch adds debugfs entry to dump MCS secy, sc, sa, flowid and port stats. This helps in debugging the packet path and to figure out where exactly packet was dropped. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Handle MCS block interruptsGeetha sowjanya8-12/+865
Hardware triggers an interrupt for events like PN wrap to zero, PN crosses set threshold. This interrupt is received by the MCS_AF. MCS AF then finds the PF/VF to which SA is mapped and notifies them using mcs_intr_notify mbox message. PF/VF using mcs_intr_cfg mbox can configure the list of interrupts for which they want to receive the notification from AF. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Vamsi Attunuru <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Support for stats collectionGeetha sowjanya6-0/+1048
Add mailbox messages to return the resource stats to the caller. Stats of SecY, SC and SAs as per the macsec standard, TCAM flow id hits/miss, mailbox to clear the stats are implemented. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Ankur Dwivedi <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Install a default TCAM for normal trafficGeetha sowjanya3-0/+69
Out of all the TCAM entries, reserve last TX and RX TCAM flow entry(low priority) so that normal traffic can be sent out and received. The traffic which needs macsec processing hits the high priority TCAM flows. Also install a FLR handler to free the allocated resources for PF/VF. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Manage the MCS block hardware resourcesGeetha sowjanya6-1/+1530
To establish a macsec connection association netdev driver needs hardware resources like SecY, TCAM flows, SCs and SAs. This patch manages allocating, freeing and configuring those resources. AF consumers can request resources and configure them via these mailbox messages. AF can allocate until it runs out of hardware resources. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Vamsi Attunuru <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: mcs: Add mailboxes for port related operationsGeetha sowjanya5-4/+376
There are set of configurations to be done at MCS port level like bringing port out of reset, making port as operational or bypass. This patch adds all the port related mailbox message handlers so that AF consumers can use them. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Vamsi Attunuru <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03octeontx2-af: cn10k: Introduce driver for macsec block.Geetha sowjanya8-1/+678
CN10K-B and CNF10K-B has macsec block(MCS) to encrypt and decrypt packets at MAC level. This block is a global resource with hardware resources like SecYs, SCs and SAs and is in between NIX block and RPM LMAC. CN10K-B silicon has only one MCS block which receives packets from all LMACS whereas CNF10K-B has seven MCS blocks for seven LMACs. Both MCS blocks are similar in operation except for few register offsets and some configurations require writing to different registers. Those differences between IPs are handled using separate ops. This patch adds basic driver and does the initial hardware calibration and parser configuration. Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Vamsi Attunuru <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: Subbaraya Sundeep <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03eth: sp7021: fix use after free bug in spl2sw_nvmem_get_mac_addressZheng Wang1-1/+1
This frees "mac" and tries to display its address as part of the error message on the next line. Swap the order. Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021") Signed-off-by: Zheng Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03Merge branch 'lan966x-police-mirroring'David S. Miller7-1/+660
Horatiu Vultur says: ==================== net: lan966x: Add police and mirror using tc-matchall Add tc-matchall classifier offload support both for ingress and egress. For this add support for the port police and port mirroring action support. Port police can happen only on ingress while port mirroring is supported both on ingress and egress ==================== Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: lan966x: Add port mirroring support using tc-matchallHoratiu Vultur5-1/+193
Add support for port mirroring. It is possible to mirror only one port at a time and it is possible to have both ingress and egress mirroring. Frames injected by the CPU don't get egress mirrored because they are bypassing the analyzer module. Signed-off-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: lan966x: Add port police support using tc-matchallHoratiu Vultur6-1/+468
Add support for port police. It is possible to police only on the ingress side. To be able to add police support also it was required to add tc-matchall classifier offload support. Signed-off-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang3-58/+119
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: Remove DECnet leftovers from flow.h.Guillaume Nault1-26/+0
DECnet was removed by commit 1202cdd66531 ("Remove DECnet support from kernel"). Let's also revome its flow structure. Compile-tested only (allmodconfig). Signed-off-by: Guillaume Nault <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03bnx2x: fix potential memory leak in bnx2x_tpa_stop()Jianglei Nie1-0/+1
bnx2x_tpa_stop() allocates a memory chunk from new_data with bnx2x_frag_alloc(). The new_data should be freed when gets some error. But when "pad + len > fp->rx_buf_size" is true, bnx2x_tpa_stop() returns without releasing the new_data, which will lead to a memory leak. We should free the new_data with bnx2x_frag_free() when "pad + len > fp->rx_buf_size" is true. Fixes: 07b0f00964def8af9321cfd6c4a7e84f6362f728 ("bnx2x: fix possible panic under memory stress") Signed-off-by: Jianglei Nie <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03eth: lan743x: reject extts for non-pci11x1x devicesRaju Lakkaraju1-0/+7
Remove PTP_PF_EXTTS support for non-PCI11x1x devices since they do not support the PTP-IO Input event triggered timestamping mechanisms added Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)") Signed-off-by: Raju Lakkaraju <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03gro: add support of (hw)gro packets to gro stackCoco Li2-6/+29
Current GRO stack only supports incoming packets containing one frame/MSS. This patch changes GRO to accept packets that are already GRO. HW-GRO (aka RSC for some vendors) is very often limited in presence of interleaved packets. Linux SW GRO stack can complete the job and provide larger GRO packets, thus reducing rate of ACK packets and cpu overhead. This also means BIG TCP can still be used, even if HW-GRO/RSC was able to cook ~64 KB GRO packets. v2: fix logic in tcp_gro_receive() Only support TCP for the moment (Paolo) Co-Developed-by: Eric Dumazet <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Coco Li <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: prestera: acl: Add check for kmemdupJiasheng Jiang3-5/+13
As the kemdup could return NULL, it should be better to check the return value and return error if fails. Moreover, the return value of prestera_acl_ruleset_keymask_set() should be checked by cascade. Fixes: 604ba230902d ("net: prestera: flower template support") Signed-off-by: Jiasheng Jiang <[email protected]> Reviewed-by: Taras Chornyi<[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03Merge branch 'mptcp-fastclose'David S. Miller3-62/+217
Mat Martineau says: ==================== mptcp: Fastclose edge cases and error handling MPTCP has existing code to use the MP_FASTCLOSE option header, which works like a RST for the MPTCP-level connection (regular RSTs only affect specific subflows in MPTCP). This series has some improvements for fastclose. Patch 1 aligns fastclose socket error handling with TCP RST behavior on TCP sockets. Patch 2 adds use of MP_FASTCLOSE in some more edge cases, like file descriptor close, FIN_WAIT timeout, and when the socket has unread data. Patch 3 updates the fastclose self tests. Patch 4 does not change any code, just fixes some outdated comments. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-10-03mptcp: update misleading comments.Paolo Abeni1-7/+7
The MPTCP data path is quite complex and hard to understend even without some foggy comments referring to modified code and/or completely misleading from the beginning. Update a few of them to more accurately describing the current status. Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03selftests: mptcp: update and extend fastclose test-casesPaolo Abeni2-25/+130
After the previous patches, the MPTCP protocol can generate fast-closes on both ends of the connection. Rework the relevant test-case to carefully trigger the fast-close code-path on a single end at the time, while ensuring than a predictable amount of data is spooled on both ends. Additionally add another test-cases for the passive socket fast-close. Reviewed-by: Matthieu Baerts <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03mptcp: use fastclose on more edge scenariosPaolo Abeni1-19/+44
Daire reported a user-space application hang-up when the peer is forcibly closed before the data transfer completion. The relevant application expects the peer to either do an application-level clean shutdown or a transport-level connection reset. We can accommodate a such user by extending the fastclose usage: at fd close time, if the msk socket has some unread data, and at FIN_WAIT timeout. Note that at MPTCP close time we must ensure that the TCP subflows will reset: set the linger socket option to a suitable value. Reviewed-by: Matthieu Baerts <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03mptcp: propagate fastclose errorPaolo Abeni1-11/+36
When an mptcp socket is closed due to an incoming FASTCLOSE option, so specific sk_err is set and later syscall will fail usually with EPIPE. Align the current fastclose error handling with TCP reset, properly setting the socket error according to the current msk state and propagating such error. Additionally sendmsg() is currently not handling properly the sk_err, always returning EPIPE. Reviewed-by: Matthieu Baerts <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03Merge branch 'RollBall-Hilink-Turris-10G-copper-SFP-support'David S. Miller12-141/+797
Marek Behún says: ==================== RollBall / Hilink / Turris 10G copper SFP support I am resurrecting my attempt to add support for RollBall / Hilink / Turris 10G copper SFPs modules. The modules contain Marvell 88X3310 PHY, which can communicate with the system via sgmii, 2500base-x, 5gbase-r, 10gbase-r or usxgmii mode. Some of the patches I've taken from Russell King's net-queue [1] (with some rebasing). The important change from my previous attempts are: - I am including the changes needed to phylink and marvell10g driver, so that the 88X3310 PHY is configured to use PHY modes supported by the host (the PHY defaults to use 10gbase-r only on host's side) - I have changed the patch that informs phylib about the interfaces supported by the host (patch 5 of this series): it now fills in the phydev->host_interfaces member only when connecting a PHY that is inside a SFP module. This may change in the future. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: sfp: add support for multigig RollBall transceiversMarek Behún1-10/+39
This adds support for multigig copper SFP modules from RollBall/Hilink. These modules have a specific way to access clause 45 registers of the internal PHY. We also need to wait at least 22 seconds after deasserting TX disable before accessing the PHY. The code waits for 25 seconds just to be sure. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phy: mdio-i2c: support I2C MDIO protocol for RollBall SFP modulesMarek Behún3-7/+313
Some multigig SFPs from RollBall and Hilink do not expose functional MDIO access to the internal PHY of the SFP via I2C address 0x56 (although there seems to be read-only clause 22 access on this address). Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be selected to 3 and the password must be filled with 0xff bytes for this PHY communication to work. This extends the mdio-i2c driver to support this protocol by adding a special parameter to mdio_i2c_alloc function via which this RollBall protocol can be selected. Signed-off-by: Marek Behún <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: sfp: create/destroy I2C mdiobus before PHY probe/after PHY releaseMarek Behún2-13/+57
Instead of configuring the I2C mdiobus when SFP driver is probed, create/destroy the mdiobus before the PHY is probed for/after it is released. This way we can tell the mdio-i2c code which protocol to use for each SFP transceiver. Move the code that determines MDIO I2C protocol from sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID parsing is done. Don't allocate I2C bus if no PHY is expected. Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: sfp: Add and use macros for SFP quirks definitionsMarek Behún1-35/+26
Add macros SFP_QUIRK(), SFP_QUIRK_M() and SFP_QUIRK_F() for defining SFP quirk table entries. Use them to deduplicate the code a little bit. Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phylink: allow attaching phy for SFP modules on 802.3z modeMarek Behún1-4/+1
Some SFPs may contain an internal PHY which may in some cases want to connect with the host interface in 1000base-x/2500base-x mode. Do not fail if such PHY is being attached in one of these PHY interface modes. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Russell King <[email protected]> Reviewed-by: Pali Rohár <[email protected]> Cc: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phy: marvell10g: select host interface configurationRussell King1-0/+112
Select the host interface configuration according to the capabilities of the host if the host provided them. This is currently provided only when connecting PHY that is inside a SFP. The PHY supports several configurations of host communication: - always communicate with host in 10gbase-r, even if copper speed is lower (rate matching mode), - the same as above but use xaui/rxaui instead of 10gbase-r, - switch host SerDes mode between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed, - the same as above but use xaui/rxaui instead of 10gbase-r. This mode of host communication, called MACTYPE, is by default selected by strapping pins, but it can be changed in software. This adds support for selecting this mode according to which modes are supported by the host. This allows the kernel to: - support SFP modules with 88X33X0 or 88E21X0 inside them Note: we use mv3310_select_mactype() for both 88X3310 and 88X3340, although 88X3340 does not support XAUI. This is not a problem because 88X3340 does not declare XAUI in it's supported_interfaces, and so this function will never choose that MACTYPE. Signed-off-by: Russell King <[email protected]> [ rebase, updated, also added support for 88E21X0 ] Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phy: marvell10g: Use tabs instead of spaces for indentationMarek Behún1-9/+9
Some register definitions were defined with spaces used for indentation. Change them to tabs. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phylink: pass supported host PHY interface modes to phylib for SFP's PHYsMarek Behún2-0/+21
Pass the supported PHY interface types to phylib if the PHY we are connecting is inside a SFP, so that the PHY driver can select an appropriate host configuration mode for their interface according to the host capabilities. For example the Marvell 88X3310 PHY inside RollBall SFP modules defaults to 10gbase-r mode on host's side, and the marvell10g driver currently does not change this setting. But a host may not support 10gbase-r. For example Turris Omnia only supports sgmii, 1000base-x and 2500base-x modes. The PHY can be configured to use those modes, but in order for the PHY driver to do that, it needs to know which modes are supported. Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phylink: rename phylink_sfp_config()Russell King (Oracle)1-6/+5
phylink_sfp_config() now only deals with configuring the MAC for a SFP containing a PHY. Rename it to be specific. Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phylink: use phy_interface_t bitmaps for optical modulesRussell King1-30/+134
Where a MAC provides a phy_interface_t bitmap, use these bitmaps to select the operating interface mode for optical SFP modules, rather than using the linkmode bitmaps. Signed-off-by: Russell King <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: sfp: augment SFP parsing with phy_interface_t bitmapRussell King9-28/+78
We currently parse the SFP EEPROM to a bitmap of ethtool link modes, and then attempt to convert the link modes to a PHY interface mode. While this works at present, there are cases where this is sub-optimal. For example, where a module can operate with several different PHY interface modes. To start addressing this, arrange for the SFP EEPROM parsing to also provide a bitmap of the possible PHY interface modes. Signed-off-by: Russell King <[email protected]> Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03net: phylink: add ability to validate a set of interface modesRussell King (Oracle)1-7/+10
Rather than having the ability to validate all supported interface modes or a single interface mode, introduce the ability to validate a subset of supported modes. Signed-off-by: Russell King (Oracle) <[email protected]> [ rebased on current net-next ] Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-03platform/x86: use PLATFORM_DEVID_NONE instead of -1Barnabás Pőcze25-26/+27
Use the `PLATFORM_DEVID_NONE` constant instead of hard-coding -1 when creating a platform device. No functional changes are intended. Signed-off-by: Barnabás Pőcze <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-10-03platform/x86/amd: pmc: Dump idle mask during "check" stage insteadMario Limonciello1-5/+3
The idle mask is dumped during the "prepare" and "restore" stage right now, which helps to demonstrate issues only related to the first s2idle entry. If the system has entered s2idle once, but was woken up never breaking the s2idle loop but also never went back to sleep we might still have another issue to deal with however. Move the dynamic debugging message here so that we'll catch it on each iteration. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216516 Signed-off-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.