aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-17dmaengine: sprd: stop referencing config->slave_idArnd Bergmann1-3/+0
It appears that the code that reads the slave_id from the channel config was copied incorrectly from other drivers. Nothing ever sets this field on platforms that use this driver, so remove the reference. Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17dmaengine: pxa/mmp: stop referencing config->slave_idArnd Bergmann2-13/+0
The last driver referencing the slave_id on Marvell PXA and MMP platforms was the SPI driver, but this stopped doing so a long time ago, so the TODO from the earlier patch can no be removed. Fixes: b729bf34535e ("spi/pxa2xx: Don't use slave_id of dma_slave_config") Fixes: 13b3006b8ebd ("dma: mmp_pdma: add filter function") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17dmaengine: shdma: remove legacy slave_id parsingArnd Bergmann1-8/+0
The slave device is picked through either devicetree or a filter function, and any remaining out-of-tree drivers would have warned about this usage since 2015. Stop interpreting the field finally so it can be removed from the interface. Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17mmc: bcm2835: stop setting chan_config->slave_idArnd Bergmann1-2/+0
The field is not interpreted by the DMA engine driver, as all the data is passed from devicetree instead. Remove the assignment so the field can eventually be deleted. Reviewed-by: Nicolas Saenz Julienne <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17spi: pic32: stop setting dma_config->slave_idArnd Bergmann1-2/+0
Setting slave_id makes no sense with DT based probing, and should eventually get removed entirely. Address this driver by no longer setting the field here. I could not find which DMA driver is used on PIC32, if it's in the tree at all, but none of the obvious ones even care about slave_id any more. Acked-by: Mark Brown <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17ASoC: dai_dma: remove slave_id fieldArnd Bergmann2-5/+2
This field is no longer set from any driver now, so remove the last references as well. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17dmaengine: tegra20-apb: stop checking config->slave_idArnd Bergmann1-6/+0
Nothing sets the slave_id field any more, so stop accessing it to allow the removal of this field. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-17ASoC: tegra20-spdif: stop setting slave_idArnd Bergmann1-1/+0
The DMA resource is never set up anywhere, and passing this as slave_id has not been the proper procedure in a long time. As a preparation for removing all slave_id references from the ALSA code, remove this one. According to Dmitry Osipenko, this driver has never been used and the mechanism for configuring DMA would not work as it is implemented, so this part will get rewritten when the driver gets put into use again in the future. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Dmitry Osipenko <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-13dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross1-1/+1
modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-12-13dmaengine: idxd: fix missed completion on abort pathDave Jiang1-1/+17
Ming reported that with the abort path of the descriptor submission, there can be a window where a completed descriptor can be missed to be completed by the irq completion thread: CPU A CPU B Submit (successful) Submit (fail) irq_process_work_list() // empty llist_abort_desc() // remove all descs from pending list irq_process_pending_llist() // empty exit idxd_wq_thread() with no processing Add opportunistic descriptor completion in the abort path in order to remove the missed completion. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Ming Li <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-12-13dmaengine: ti: k3-udma: Fix smatch warningsVignesh Raghavendra1-50/+107
Smatch reports below warnings [1] wrt dereferencing rm_res when it can potentially be ERR_PTR(). This is possible when entire range is allocated to Linux Fix this case by making sure, there is no deference of rm_res when its ERR_PTR(). [1]: drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() Reported-by: Nishanth Menon <[email protected]> Signed-off-by: Vignesh Raghavendra <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-25dmaengine: ppc4xx: remove unused variable `rval'Jason Wang1-2/+1
The variable used for returning status in `ppc440spe_adma_dma2rxor_prep_src' function is never changed and this function just need to return 0. Thus, the `rval' can be removed and return 0 from `ppc440spe_adma_dma2rxor_prep_src'. Signed-off-by: Jason Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22Documentation: dmaengine: Correctly describe dmatest with channel unsetDaniel Thompson1-3/+4
Currently the documentation states that channels must be configured before running the dmatest. This has not been true since commit 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel"). Fix accordingly. Fixes: 6b41030fdc79 ("dmaengine: dmatest: Restore default for channel") Signed-off-by: Daniel Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22Documentation: dmaengine: Add a description of what dmatest doesDaniel Thompson1-0/+10
Currently it can difficult to determine what dmatest does without reading the source code. Let's add a description. The description is taken mostly from the patch header of commit 4a776f0aa922 ("dmatest: Simple DMA memcpy test client"). It has been edited and updated slightly. Nevertheless the new text was largely written by Haarvard Skinnemoen and was copied from another patch, already committed to the kernel, which has Haarvard's SoB: attached to it. Signed-off-by: Daniel Thompson <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: fix calling wq quiesce inside spinlockDave Jiang1-1/+1
Dan reports that smatch has found idxd_wq_quiesce() is being called inside the idxd->dev_lock. idxd_wq_quiesce() calls wait_for_completion() and therefore it can sleep. Move the call outside of the spinlock as it does not need device lock. Fixes: 5b0c68c473a1 ("dmaengine: idxd: support reporting of halt interrupt") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163716858508.1721911.15051495873516709923.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: qcom: gpi: Remove unnecessary print function dev_err()Xu Wang1-3/+1
The print function dev_err() is redundant because platform_get_irq() already prints an error. Signed-off-by: Xu Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent()Christophe JAILLET1-9/+1
The commit in the Fixes: tag has changed the logic of the code and now it is likely that the probe will return an early success (0), even if not completely executed. This should lead to a crash or similar issue later on when the code accesses to some never allocated resources. Change the '!err' into a 'err' when checking if 'dma_set_mask_and_coherent()' has failed or not. While at it, simplify the code and remove the "can't success code" related to 32 DMA mask. As stated in [1], 'dma_set_mask_and_coherent(DMA_BIT_MASK(64))' can't fail if 'dev->dma_mask' is non-NULL. And if it is NULL, it would fail for the same reason when tried with DMA_BIT_MASK(32). [1]: https://lkml.org/lkml/2021/6/7/398 Fixes: ecb8c88bd31c ("dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/935fbb40ae930c5fe87482a41dcb73abf2257973.1636492127.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: Add consumer for the new DMA_MEMCPY_SG API function.Adrian Larumbe1-0/+122
This new CDMA binding for device_prep_dma_memcpy_sg was partially borrowed from xlnx kernel tree, an expanded with extended address space support when linking descriptor segments and checking for incorrect zero transfer size. Signed-off-by: Adrian Larumbe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: Add core function and capability check for DMA_MEMCPY_SGAdrian Larumbe2-0/+27
This is the old DMA_SG interface that was removed in commit c678fa66341c ("dmaengine: remove DMA_SG as it is dead code in kernel"). It has been renamed to DMA_MEMCPY_SG to better match the MEMSET and MEMSET_SG naming convention. It should only be used for mem2mem copies, either main system memory or CPU-addressable device memory (like video memory on a PCI graphics card). Bringing back this interface was prompted by the need to use the Xilinx CDMA device for mem2mem SG transfers. Signed-off-by: Adrian Larumbe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: Add documentation for new memcpy scatter-gather functionAdrian Larumbe1-0/+23
Documentation describes semantics, limitations and a typical use case scenario. Signed-off-by: Adrian Larumbe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: dw-axi-dmac: Fix uninitialized variable in ↵Tim Gardner1-2/+2
axi_chan_block_xfer_start() Coverity complains of an uninitialized variable: 5. uninit_use_in_call: Using uninitialized value config.dst_per when calling axi_chan_config_write. [show details] 6. uninit_use_in_call: Using uninitialized value config.hs_sel_src when calling axi_chan_config_write. [show details] CID 121164 (#1-3 of 3): Uninitialized scalar variable (UNINIT) 7. uninit_use_in_call: Using uninitialized value config.src_per when calling axi_chan_config_write. [show details] 418 axi_chan_config_write(chan, &config); Fix this by initializing the structure to 0 which should at least be benign in axi_chan_config_write(). Also fix what looks like a cut-n-paste error when initializing config.hs_sel_dst. Fixes: 824351668a413 ("dmaengine: dw-axi-dmac: support DMAX_NUM_CHANNELS > 8") Cc: Eugeniy Paltsev <[email protected]> Cc: Vinod Koul <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Tim Gardner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: handle interrupt handle revoked eventDave Jiang6-4/+152
"Interrupt handle revoked" is an event that happens when the driver is running on a guest kernel and the VM is migrated to a new machine. The device will trigger an interrupt that signals to the guest driver that the interrupt handles need to be replaced. The misc irq thread function calls a helper function to handle the event. The function uses the WQ percpu_ref to quiesce the kernel submissions. It then replaces the interrupt handles by requesting interrupt handle command for each I/O MSIX vector. Once the handle is updated, the driver will unblock the submission path to allow new submissions. The submitter will attempt to acquire a percpu_ref before submission. When the request fails, it will wait on the wq_resurrect 'completion'. The driver does anticipate the possibility of descriptors being submitted before the WQ percpu_ref is killed. If a descriptor has already been submitted, it will return with incorrect interrupt handle status. The descriptor will be re-submitted with the new interrupt handle on the completion path. For descriptors with incorrect interrupt handles, completion interrupt won't be triggered. At the completion of the interrupt handle refresh, the handling function will call idxd_int_handle_refresh_drain() to issue drain descriptors to each of the wq with associated interrupt handle. The drain descriptor will have interrupt request set but without completion record. This will ensure all descriptors with incorrect interrupt completion handle get drained and a completion interrupt is triggered for the guest driver to process them. Reviewed-by: Kevin Tian <[email protected]> Co-Developed-by: Sanjay Kumar <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528420189.3925689.18212568593220415551.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: handle invalid interrupt handle descriptorsDave Jiang3-4/+61
Handle a descriptor that has been marked with invalid interrupt handle error in status. Create a work item that will resubmit the descriptor. This typically happens when the driver has handled the revoke interrupt handle event and has a new interrupt handle. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528419601.3925689.4166517602890523193.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: create locked version of idxd_quiesce() callDave Jiang3-3/+12
Add a locked version of idxd_quiesce() call so that the quiesce can be called with a lock in situations where the lock is not held by the caller. In the driver probe/remove path, the lock is already held, so the raw version can be called w/o locking. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528418980.3925689.5841907054957931211.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: add helper for per interrupt handle drainDave Jiang1-0/+39
The helper is called at the completion of the interrupt handle refresh event. It issues drain descriptors to each of the wq with associated interrupt handle. The drain descriptor will have interrupt request set but without completion record. This will ensure all descriptors with incorrect interrupt completion handle get drained and a completion interrupt is triggered for the guest driver to process them. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528418315.3925689.7944718440052849626.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: move interrupt handle assignmentDave Jiang1-9/+5
In preparation of supporting interrupt handle revoke event, move the interrupt handle assignment to right before the descriptor to be submitted. This allows the interrupt handle revoke logic to assign the latest interrupt handle on submission. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528417767.3925689.7730411152122952808.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: int handle management refactoringDave Jiang5-47/+64
Attach int_handle to irq_entry. This removes the separate management of int handles and reduces the confusion of interating through int handles that is off by 1 count. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528417065.3925689.11505755433684476288.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: idxd: rework descriptor free path on failureDave Jiang5-28/+19
Refactor the completion function to allow skipping of descriptor freeing on the submission failure path. This completely removes descriptor freeing from the submit failure path and leave the responsibility to the caller. Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/163528416222.3925689.12859769271667814762.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2021-11-22dmaengine: ti: edma: Use 'for_each_set_bit' when possibleChristophe JAILLET1-2/+1
Use 'for_each_set_bit()' instead of hand wrinting it. It is much less version. Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/47a7415d3aff8dfb66780bd6f80b085db4503bf7.1637263609.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <[email protected]>
2021-11-14Linux 5.16-rc1Linus Torvalds1-2/+2
2021-11-14kconfig: Add support for -Wimplicit-fallthroughGustavo A. R. Silva2-5/+6
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang. The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH, which is enabled by default. Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This bugfix only appears in Clang 14.0.0, so older versions still contain the bug and -Wimplicit-fallthrough won't be enabled for them, for now. This concludes a long journey and now we are finally getting rid of the unintentional fallthrough bug-class in the kernel, entirely. :) Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8 [1] Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2] Link: https://github.com/KSPP/linux/issues/115 Link: https://github.com/ClangBuiltLinux/linux/issues/236 Co-developed-by: Kees Cook <[email protected]> Signed-off-by: Kees Cook <[email protected]> Co-developed-by: Linus Torvalds <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-14Merge tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds4-7/+12
Pull xfs cleanups from Darrick Wong: "The most 'exciting' aspect of this branch is that the xfsprogs maintainer and I have worked through the last of the code discrepancies between kernel and userspace libxfs such that there are no code differences between the two except for #includes. IOWs, diff suffices to demonstrate that the userspace tools behave the same as the kernel, and kernel-only bits are clearly marked in the /kernel/ source code instead of just the userspace source. Summary: - Clean up open-coded swap() calls. - A little bit of #ifdef golf to complete the reunification of the kernel and userspace libxfs source code" * tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: sync xfs_btree_split macros with userspace libxfs xfs: #ifdef out perag code for userspace xfs: use swap() to make dabtree code cleaner
2021-11-14Merge tag 'for-5.16/parisc-3' of ↵Linus Torvalds5-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc fixes from Helge Deller: "Fix a build error in stracktrace.c, fix resolving of addresses to function names in backtraces, fix single-stepping in assembly code and flush userspace pte's when using set_pte_at()" * tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/entry: fix trace test in syscall exit path parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page parisc: Fix implicit declaration of function '__kernel_text_address' parisc: Fix backtrace to always include init funtion names
2021-11-14Merge tag 'sh-for-5.16' of git://git.libc.org/linux-shLinus Torvalds21-180/+78
Pull arch/sh updates from Rich Felker. * tag 'sh-for-5.16' of git://git.libc.org/linux-sh: sh: pgtable-3level: Fix cast to pointer from integer of different size sh: fix READ/WRITE redefinition warnings sh: define __BIG_ENDIAN for math-emu sh: math-emu: drop unused functions sh: fix kconfig unmet dependency warning for FRAME_POINTER sh: Cleanup about SPARSE_IRQ sh: kdump: add some attribute to function maple: fix wrong return value of maple_bus_init(). sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/ sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y sh: boards: Fix the cacography in irq.c sh: check return code of request_irq sh: fix trivial misannotations
2021-11-14Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-13/+13
Pull ARM fixes from Russell King: - Fix early_iounmap - Drop cc-option fallbacks for architecture selection * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9156/1: drop cc-option fallbacks for architecture selection ARM: 9155/1: fix early early_iounmap()
2021-11-14Merge tag 'devicetree-fixes-for-5.16-1' of ↵Linus Torvalds107-277/+277
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Two fixes due to DT node name changes on Arm, Ltd. boards - Treewide rename of Ingenic CGU headers - Update ST email addresses - Remove Netlogic DT bindings - Dropping few more cases of redundant 'maxItems' in schemas - Convert toshiba,tc358767 bridge binding to schema * tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: watchdog: sunxi: fix error in schema bindings: media: venus: Drop redundant maxItems for power-domain-names dt-bindings: Remove Netlogic bindings clk: versatile: clk-icst: Ensure clock names are unique of: Support using 'mask' in making device bus id dt-bindings: treewide: Update @st.com email address to @foss.st.com dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml dt-bindings: media: Update maintainers for st,stm32-cec.yaml dt-bindings: mfd: timers: Update maintainers for st,stm32-timers dt-bindings: timer: Update maintainers for st,stm32-timer dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
2021-11-14Merge tag 'timers-urgent-2021-11-14' of ↵Linus Torvalds3-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for POSIX CPU timers to address a problem where POSIX CPU timer delivery stops working for a new child task because copy_process() copies state information which is only valid for the parent task" * tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
2021-11-14Merge tag 'irq-urgent-2021-11-14' of ↵Linus Torvalds8-28/+60
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem Core code: - A regression fix for the Open Firmware interrupt mapping code where a interrupt controller property in a node caused a map property in the same node to be ignored. Interrupt chip drivers: - Workaround a limitation in SiFive PLIC interrupt chip which silently ignores an EOI when the interrupt line is masked. - Provide the missing mask/unmask implementation for the CSKY MP interrupt controller. PCI/MSI: - Prevent a use after free when PCI/MSI interrupts are released by destroying the sysfs entries before freeing the memory which is accessed in the sysfs show() function. - Implement a mask quirk for the Nvidia ION AHCI chip which does not advertise masking capability despite implementing it. Even worse the chip comes out of reset with all MSI entries masked, which due to the missing masking capability never get unmasked. - Move the check which prevents accessing the MSI[X] masking for XEN back into the low level accessors. The recent consolidation missed that these accessors can be invoked from places which do not have that check which broke XEN. Move them back to he original place instead of sprinkling tons of these checks all over the code" * tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: of/irq: Don't ignore interrupt-controller when interrupt-map failed irqchip/sifive-plic: Fixup EOI failed when masked irqchip/csky-mpintc: Fixup mask/unmask implementation PCI/MSI: Destroy sysfs before freeing entries PCI: Add MSI masking quirk for Nvidia ION AHCI PCI/MSI: Deal with devices lying about their MSI mask capability PCI/MSI: Move non-mask check back into low level accessors
2021-11-14Merge tag 'locking-urgent-2021-11-14' of ↵Linus Torvalds3-4/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 static call update from Thomas Gleixner: "A single fix for static calls to make the trampoline patching more robust by placing explicit signature bytes after the call trampoline to prevent patching random other jumps like the CFI jump table entries" * tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call,x86: Robustify trampoline patching
2021-11-14Merge tag 'sched_urgent_for_v5.16_rc1' of ↵Linus Torvalds13-59/+96
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Avoid touching ~100 config files in order to be able to select the preemption model - clear cluster CPU masks too, on the CPU unplug path - prevent use-after-free in cfs - Prevent a race condition when updating CPU cache domains - Factor out common shared part of smp_prepare_cpus() into a common helper which can be called by both baremetal and Xen, in order to fix a booting of Xen PV guests * tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: preempt: Restore preemption model selection configs arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology() sched/fair: Prevent dead task groups from regaining cfs_rq's sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain() x86/smp: Factor out parts of native_smp_prepare_cpus()
2021-11-14Merge tag 'perf_urgent_for_v5.16_rc1' of ↵Linus Torvalds3-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent unintentional page sharing by checking whether a page reference to a PMU samples page has been acquired properly before that - Make sure the LBR_SELECT MSR is saved/restored too - Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any residual data left * tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Avoid put_page() when GUP fails perf/x86/vlbr: Add c->flags to vlbr event constraints perf/x86/lbr: Reset LBR_SELECT during vlbr reset
2021-11-14Merge tag 'x86_urgent_for_v5.16_rc1' of ↵Linus Torvalds8-4/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add the model number of a new, Raptor Lake CPU, to intel-family.h - Do not log spurious corrected MCEs on SKL too, due to an erratum - Clarify the path of paravirt ops patches upstream - Add an optimization to avoid writing out AMX components to sigframes when former are in init state * tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Raptor Lake to Intel family x86/mce: Add errata workaround for Skylake SKX37 MAINTAINERS: Add some information to PARAVIRT_OPS entry x86/fpu: Optimize out sigframe xfeatures when in init state
2021-11-14Merge tag 'perf-tools-for-v5.16-2021-11-13' of ↵Linus Torvalds131-1148/+2639
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Hardware tracing: - ARM: * Print the size of the buffer size consistently in hexadecimal in ARM Coresight. * Add Coresight snapshot mode support. * Update --switch-events docs in 'perf record'. * Support hardware-based PID tracing. * Track task context switch for cpu-mode events. - Vendor events: * Add metric events JSON file for power10 platform perf test: - Get 'perf test' unit tests closer to kunit. - Topology tests improvements. - Remove bashisms from some tests. perf bench: - Fix memory leak of perf_cpu_map__new() in the futex benchmarks. libbpf: - Add some more weak libbpf functions o allow building with the libbpf versions, old ones, present in distros. libbeauty: - Translate [gs]setsockopt 'level' argument integer values to strings. tools headers UAPI: - Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files with the kernel sources. Documentation: - Add documentation to 'struct symbol'. - Synchronize the definition of enum perf_hw_id with code in tools/perf/design.txt" * tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits) perf tests: Remove bash constructs from stat_all_pmu.sh perf tests: Remove bash construct from record+zstd_comp_decomp.sh perf test: Remove bash construct from stat_bpf_counters.sh test perf bench futex: Fix memory leak of perf_cpu_map__new() tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync sound/asound.h with the kernel sources tools headers UAPI: Sync linux/prctl.h with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources perf tools: Add more weak libbpf functions perf bpf: Avoid memory leak from perf_env__insert_btf() perf symbols: Factor out annotation init/exit perf symbols: Bit pack to save a byte perf symbols: Add documentation to 'struct symbol' tools headers UAPI: Sync files changed by new futex_waitv syscall perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning perf arm-spe: Support hardware-based PID tracing perf arm-spe: Save context ID in record perf arm-spe: Update --switch-events docs in 'perf record' perf arm-spe: Track task context switch for cpu-mode events ...
2021-11-14Merge tag 'irqchip-fixes-5.16-1' of ↵Thomas Gleixner3-8/+27
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Address an issue with the SiFive PLIC being unable to EOI a masked interrupt - Move the disable/enable methods in the CSky mpintc to mask/unmask - Fix a regression in the OF irq code where an interrupt-controller property in the same node as an interrupt-map property would get ignored Link: https://lore.kernel.org/all/[email protected]
2021-11-13Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linuxLinus Torvalds76-12941/+27373
Pull zstd update from Nick Terrell: "Update to zstd-1.4.10. Add myself as the maintainer of zstd and update the zstd version in the kernel, which is now 4 years out of date, to a much more recent zstd release. This includes bug fixes, much more extensive fuzzing, and performance improvements. And generates the kernel zstd automatically from upstream zstd, so it is easier to keep the zstd verison up to date, and we don't fall so far out of date again. This includes 5 commits that update the zstd library version: - Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. - Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). - Adds me ([email protected]) as the maintainer of `lib/zstd`. - Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years [1] Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set below. The largest changes in the design of the patchset are driven by the discussions in v11, v5, and v1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org" Link: https://lkml.org/lkml/2020/9/29/27 [1] Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ [v11] Link: https://lore.kernel.org/lkml/[email protected]/ [v10] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ [v9] Link: https://lore.kernel.org/linux-f2fs-devel/[email protected]/ [v8] Link: https://lkml.org/lkml/2020/12/3/1195 [v7] Link: https://lkml.org/lkml/2020/12/2/1245 [v6] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ [v5] Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4] Link: https://lkml.org/lkml/2020/9/23/1074 [v3] Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ [v1] Signed-off-by: Nick Terrell <[email protected]> Tested By: Paul Jones <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Tested-by: Sedat Dilek <[email protected]> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <[email protected]> * tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux: lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical MAINTAINERS: Add maintainer entry for zstd lib: zstd: Upgrade to latest upstream zstd version 1.4.10 lib: zstd: Add decompress_sources.h for decompress_unzstd lib: zstd: Add kernel-specific API
2021-11-13Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linuxLinus Torvalds2-3/+7
Pull virtio-mem update from David Hildenbrand: "Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem, now that "accidential" access to logically unplugged memory inside added Linux memory blocks is no longer possible, because we: - Removed /dev/kmem in commit bbcd53c96071 ("drivers/char: remove /dev/kmem for good") - Disallowed access to virtio-mem device memory via /dev/mem in commit 2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory via /dev/mem") - Sanitized access to virtio-mem device memory via /proc/kcore in commit 0daa322b8ff9 ("fs/proc/kcore: don't read offline sections, logically offline pages and hwpoisoned pages") - Sanitized access to virtio-mem device memory via /proc/vmcore in commit ce2814622e84 ("virtio-mem: kdump mode to sanitize /proc/vmcore access") The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be required by some hypervisors implementing virtio-mem in the near future, so let's support it now that we safely can" * tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux: virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
2021-11-13perf tests: Remove bash constructs from stat_all_pmu.shJames Clark1-2/+2
The tests were passing but without testing and were printing the following: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 51650 Testing cpu/branch-instructions/ ./tests/shell/stat_all_pmu.sh: 10: [: Performance counter stats for 'true': 137,307 cpu/branch-instructions/ 0.001686672 seconds time elapsed 0.001376000 seconds user 0.000000000 seconds sys: unexpected operator Changing the regexes to a grep works in sh and prints this: $ ./perf test -v 90 90: perf all PMU test : --- start --- test child forked, pid 60186 [...] Testing tlb_flush.stlb_any test child finished with 0 ---- end ---- perf all PMU test: Ok Signed-off-by: James Clark <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf tests: Remove bash construct from record+zstd_comp_decomp.shJames Clark1-1/+1
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") inadvertently removed the -g flag from all platforms rather than just s390, because the [[ ]] construct fails in sh. Changing to single brackets restores testing of call graphs and removes the following error from the output: $ ./perf test -v 85 85: Zstd perf.data compression/decompression : --- start --- test child forked, pid 50643 Collecting compressed record file: ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390") Signed-off-by: James Clark <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf test: Remove bash construct from stat_bpf_counters.sh testJames Clark1-1/+1
Currently the test skips with an error because == only works in bash: $ ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 44586 ./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Changing == to = does the same thing, but doesn't result in an error: ./perf test 91 -v Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 91: perf stat --bpf-counters test : --- start --- test child forked, pid 45833 Skipping: --bpf-counters not supported Error: unknown option `bpf-counters' [...] test child finished with -2 ---- end ---- perf stat --bpf-counters test: Skip Signed-off-by: James Clark <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-13perf bench futex: Fix memory leak of perf_cpu_map__new()Sohaib Mohamed4-0/+4
ASan reports memory leaks while running: $ sudo ./perf bench futex all The leaks are caused by perf_cpu_map__new not being freed. This patch adds the missing perf_cpu_map__put since it calls cpu_map_delete implicitly. Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions") Signed-off-by: Sohaib Mohamed <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: André Almeida <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sohaib Mohamed <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.