aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-29powerpc: Fix BPF_JIT code to link with multiple TOCsMichael Ellerman1-0/+2
If the kernel is big enough (eg. allyesconfig), the linker may need to switch TOCs when calling from the BPF JIT code out to the external helpers (skb_copy_bits() & bpf_internal_load_pointer_neg_helper()). In order to do that we need to leave space after the bl for the linker to insert a reload of our TOC pointer. Signed-off-by: Michael Ellerman <[email protected]> Acked-by: Matt Evans <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-06-29ASoC: spdif: Build separate RX and TX objectsMark Brown1-2/+3
Otherwise we fail to link when building as modules due to multiple init/exit functions. Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-06-28Merge tag 'hwmon-for-linus' of ↵Linus Torvalds5-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon changes from Guenter Roeck: "Just e-mail address updates" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: Update my e-mail address hwmon: (applesmc) correct email address for Jesper Juhl
2012-06-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds3-2/+5
Pull watchdog fixes from Wim Van Sebroeck: "This fixes: - the WDIOC_GETSTATUS return value - the unregister of all NMI events on exit - the loading of the iTCO_wdt driver after the conversion to the lpc_ich mfd model." * git://www.linux-watchdog.org/linux-watchdog: watchdog: core: fix WDIOC_GETSTATUS return value watchdog: hpwdt: Unregister NMI events on exit. watchdog: iTCO_wdt: add platform driver module alias
2012-06-28Merge branch 'for_linus' of ↵Linus Torvalds1-38/+64
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fixes from Jan Kara: "Make UDF more robust in presence of corrupted filesystem" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fortify loading of sparing table udf: Avoid run away loop when partition table length is corrupted udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()
2012-06-28Merge tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifsLinus Torvalds3-10/+10
Pull ubi/ubifs fixes from Artem Bityutskiy: "Fix the debugfs regression - we never enable it because incorrect 'IS_ENABLED()' macro usage: should be 'IS_ENABLED(CONFIG_DEBUG_FS)', but we had 'IS_ENABLED(DEBUG_FS)'. Also fix incorrect assertion." * tag 'upstream-3.5-rc5' of git://git.infradead.org/linux-ubifs: UBI: correct usage of IS_ENABLED() UBIFS: correct usage of IS_ENABLED() UBIFS: fix assertion
2012-06-28watchdog: core: fix WDIOC_GETSTATUS return valueWim Van Sebroeck1-1/+1
In commit 7a87982420e5e126bfefeb42232d1fd92052794e we added a wrapper for the WDIOC_GETSTATUS ioctl call. The code results however in a different behaviour: it returns an error if the driver doesn't support the status operation. This is not according to the API that says that when we don't support the status operation, that we just should return a 0 value. Only when the device isn't there anymore, we should return an error. Signed-off-by: Wim Van Sebroeck <[email protected]>
2012-06-28watchdog: hpwdt: Unregister NMI events on exit.Mingarelli, Thomas1-1/+3
This patch is to unregister for NMI events upon exit. Also we are now making the default setting for allow_kdump enabled. Signed-off-by: Thomas Mingarelli <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2012-06-28watchdog: iTCO_wdt: add platform driver module aliasJan Beulich1-0/+1
The recent conversion of iTCO_wdt resulted in the driver no longer getting loaded automatically, since it no longer has a MODULE_DEVICE_TABLE() included. As the lpc_ich driver now creates a platform device, auto-loading can easily be done by having a respective module alias in place. Signed-off-by: Jan Beulich <[email protected]> Cc: Aaron Sierra <[email protected]> Acked-by: Guenter Roeck <[email protected]> Cc: Samuel Ortiz <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2012-06-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds4-18/+27
Pull drm fixes from Dave Airlie: "Nearly all intel, one missing license header in nouveau, nothing majorly earth shattering." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: Revert "drm/i915: allow PCH PWM override on IVB" drm/nouveau: add license header to prime. drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-28Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds12-13/+13
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Convert sh_clk_mstp32_register to sh_clk_mstp_register sh: kfr2r09: fix compile breakage
2012-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds85-310/+529
Pull networking update from David Miller: 1) Pairing and deadlock fixes in bluetooth from Johan Hedberg. 2) Add device IDs for AR3011 and AR3012 bluetooth chips. From Giancarlo Formicuccia and Marek Vasut. 3) Fix wireless regulatory deadlock, from Eliad Peller. 4) Fix full TX ring panic in bnx2x driver, from Eric Dumazet. 5) Revert the two commits that added skb_orphan_try(), it causes erratic bonding behavior with UDP clients and the gains it used to give are mostly no longer happening due to how BQL works. From Eric Dumazet. 6) It took two tries, but Thomas Graf fixed a problem wherein we registered ipv6 routing procfs files before their backend data were initialized properly. 7) Fix max GSO size setting in be2net, from Sarveshwar Bandi. 8) PHY device id mask is wrong for KSZ9021 and KS8001 chips, fix from Jason Wang. 9) Fix use of stale SKB data pointer after skb_linearize() call in batman-adv, from Antonio Quartulli. 10) Fix memory leak in IXGBE due to missing __GFP_COMP, from Alexander Duyck. 11) Fix probing of Gobi devices in qmi_wwan usbnet driver, from Bjørn Mork. 12) Fix suspend/resume and open failure handling in usbnet from Ming Lei. 13) Attempt to fix device r8169 hangs for certain chips, from Francois Romieu. 14) Fix advancement of RX dirty pointer in some situations in sh_eth driver, from Yoshihiro Shimoda. 15) Attempt to fix restart of IPV6 routing table dumps when there is an intervening table update. From Eric Dumazet. 16) Respect security_inet_conn_request() return value in ipv6 TCP. From Neal Cardwell. 17) Add another iPAD device ID to ipheth driver, from Davide Gerhard. 18) Fix access to freed SKB in l2tp_eth_dev_xmit(), and fix l2tp lockdep splats, from Eric Dumazet. 19) Make sure all bridge devices, regardless of whether they were created via netlink or ioctls, have their rtnetlink ops hooked up. From Thomas Graf and Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) 9p: fix min_t() casting in p9pdu_vwritef() can: flexcan: use be32_to_cpup to handle the value of dt entry xen/netfront: teardown the device before unregistering it. bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) vhost: use USER_DS in vhost_worker thread ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDP net: l2tp_eth: use LLTX to avoid LOCKDEP splats mac802154: add missed braces net: l2tp_eth: fix l2tp_eth_dev_xmit race net/mlx4_en: Release QP range in free_resources net/mlx4: Use single completion vector after NOP failure net/mlx4_en: Set correct port parameters during device initialization ipheth: add support for iPad caif-hsi: Add missing return in error path caif-hsi: Bugfix - Piggyback'ed embedded CAIF frame lost caif: Clear shutdown mask to zero at reconnect. tcp: heed result of security_inet_conn_request() in tcp_v6_conn_request() ipv6: fib: fix fib dump restart batman-adv: fix race condition in TT full-table replacement batman-adv: only drop packets of known wifi clients ...
2012-06-28udf: Fortify loading of sparing tableJan Kara1-33/+53
Add sanity checks when loading sparing table from disk to avoid accessing unallocated memory or writing to it. Signed-off-by: Jan Kara <[email protected]>
2012-06-28udf: Avoid run away loop when partition table length is corruptedJan Kara1-1/+9
Check provided length of partition table so that (possibly maliciously) corrupted partition table cannot cause accessing data beyond current buffer. Signed-off-by: Jan Kara <[email protected]>
2012-06-28udf: Use 'ret' instead of abusing 'i' in udf_load_logicalvol()Jan Kara1-4/+2
Signed-off-by: Jan Kara <[email protected]>
2012-06-28ASoC: spdif_receiver: Add support for spdif in Audio CodecVipin Kumar2-1/+68
This patch adds the support for spdif in audio codec. Signed-off-by: vipin Kumar <[email protected]> Signed-off-by: Rajeev Kumar <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-06-28ASoC: dwc: Add missing __iomem annotationsMark Brown1-2/+2
Otherwise sparse gets very upset with us. Signed-off-by: Mark Brown <[email protected]>
2012-06-28Merge branches 'sh/urgent' and 'sh/trivial' into sh-fixes-for-linusPaul Mundt11-11/+11
2012-06-28sh: Convert sh_clk_mstp32_register to sh_clk_mstp_registerNobuhiro Iwamatsu11-11/+11
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register. Signed-off-by: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2012-06-28sh: kfr2r09: fix compile breakageGuennadi Liakhovetski1-2/+2
Fix compile breakage caused by commit aa82f9fcd0062782dcbe29a2c820ba7c04dbe572 Author: Paul Mundt <[email protected]> sh: kfr2r09 evt2irq migration. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2012-06-27Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-canDavid S. Miller1-2/+2
Marc Kleine-Budde says: ==================== here's a patch intended for v3.5, targeting net/master. Hui Wang has found and fixed an endianness problem in the device tree handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2012-06-279p: fix min_t() casting in p9pdu_vwritef()Dan Carpenter1-1/+1
I don't think we're actually likely to hit this limit but if we do then the comparison should be done as size_t. The original code is equivalent to: len = strlen(sptr) % USHRT_MAX; Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-06-27Merge tag 'usb-3.5-rc5' of ↵Linus Torvalds13-24/+54
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are some small USB gadget bugfixes, and a few new USB device ids added to some drivers for the 3.5-rc5 release. Signed-off-by: Greg Kroah-Hartman <[email protected]>" * tag 'usb-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: CP210x Add 10 Device IDs USB: option: Add USB ID for Novatel Ovation MC551 usb: phy: Fix Kconfig dependency for Phy drivers usb-storage: revert commit afff07e61a52 (Add 090c:1000 to unusal-devs) SCSI & usb-storage: add try_rc_10_first flag usb: musb: host: release dma channels if no active io usb: gadget: lpc32xx_udc: fix build error with debugfs enabled usb: otg: twl6030-usb: Fix twl writes USB: option: add id for Cellient MEN-200 usb: dwc3: fix giveback of queued request in ep_dequeue usb: gadget: Complete fsl qe/udc driver conversion
2012-06-27Merge tag 'sound-3.5' of ↵Linus Torvalds10-25/+72
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here you find quite a few changes for HD-audio and a copule of quirk additions for USB-audio. All reasonably small and/or trivial." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix power-map regression for HP dv6 & co ALSA: hda - Initialize caches at codec reconfiguration ALSA: hda - Fix memory leaks at module unload ALSA: hda - Fix memory leaks in Realtek & Conexant codec parsers ALSA: hda - Add Realtek ALC280 codec support ALSA: hda - Remove obsoleted CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS ASoC: wm8994: remove duplicate code ALSA: usb-audio: add BOSS GT-100 support ALSA: HDA: Add inverted internal mic quirk for Lenovo S205 ALSA: hda - Fix ALC272X codec detection ALSA: snd_usb_audio: ignore ctrl errors on QuickCam Pro for Notebooks ALSA: snd_usb_audio: ignore ctrl errors on QuickCam E3500
2012-06-27Merge branch 'for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull a m68knommu fix from Greg Ungerer: "It contains a single fix for breakage using the Freescale FEC eth driver on ColdFire CPUs." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: define a local devm_clk_get() function
2012-06-27Merge tag 'mmc-fixes-for-3.5-rc5' of ↵Linus Torvalds2-25/+4
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - omap_hsmmc: Using AUTO_CMD12 (enabled by default in 3.5-rc1) has been found to cause data corruption on the BeagleBoard, but no other OMAP boards so far. Revert the patch until there's a root cause explanation that makes sense, at which point we might decide to use a blacklist or whitelist. - mmc_block: Fix incorrect data timeouts for the case of multiblock (ACMD22) writes for block-addressed cards. * tag 'mmc-fixes-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: Revert "mmc: omap_hsmmc: Enable Auto CMD12" mmc: block: fix the data timeout issue with ACMD22
2012-06-27Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds4-32/+40
Pull clk common framework fixes from Mike Turquette: "This contains three NULL pointer fixes and two device regression fixups. Two NULL pointer dereferences were in the common clk core due to lack of sanity checking and the third NPD was in the mxs-specific clock code due to incorrect use of __initdata. The device regressions were the result of improper data: a wrong string name for matching DT data broke the SPEAr ethernet controller and another string matching problem in the mxs clock data resulted in a broken MMC controller." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: fix clock lookup after freeing init memory clk: mxs: fix ref_io clock definition clk: Check parent for NULL in clk_change_rate clk: Allow late cache allocation for clk->parents clk: SPEAr600: Fix ethernet clock name for DT based probing
2012-06-27chmod +x scripts/gfp-translateDave Jones1-0/+0
This script lacks an executable bit. Signed-off-by: Dave Jones <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-06-27Merge branch 'drm-intel-fixes' of ↵Dave Airlie3-18/+4
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Two tiny patches and one revert: - Kill a bogus error message introduced in 3.4, further Bspec reading indicates that this is how the hw is supposed to work. - Reorder one backlight register restore, fixing broken backlight on some machines after resume. - Revert a hack from Jesse for ivb backlight control - it breaks the backlight controls on my shiny new ivb laptop." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: allow PCH PWM override on IVB" drm/i915: Fix eDP blank screen after S3 resume on HP desktops drm/i915: rip out the PM_IIR WARN
2012-06-27Revert "drm/i915: allow PCH PWM override on IVB"Daniel Vetter1-16/+0
This reverts commit f82cfb6bcda164ef3a66b8c3fc549b1f9bdd09ad. This breaks the backlight controls on my IVB asus zenbook with an eDP panel. I guess the right fix would be to read this bit and use either the pch or the cpu register to frob the backlight values. But that is stuff for -next. Cc: Jesse Barnes <[email protected]> Signed-Off-by: Daniel Vetter <[email protected]>
2012-06-27ALSA: hda - give 3-pin jack the name "Headphone Mic Jack"David Henningsson1-2/+20
This 3-pin jack was labeled "Headphone Jack", but it could also be used as a mic jack just by switching "Input Source". Therefore we need to call the jack something else, to make sure PulseAudio can use the speaker together with the external mic. (PulseAudio might mute the speaker if it detects a headphone being plugged in.) Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-06-27ALSA: HDA: Support single 3-pin jack without VREF on the actual pinDavid Henningsson1-15/+34
Some ASUS device has a single 3-pin jack that can either be a mic or a headphone, but the pin does not have VREF capabilities. We've been told by Realtek to instead enable VREF on pin 0x18 in that case. BugLink: https://bugs.launchpad.net/bugs/1018262 Tested-by: Chih-Hsyuan Ho <[email protected]> Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-06-27PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup.Deepthi Dharwar1-2/+30
Commit e978aa7d7d57d04eb5f88a7507c4fb98577def77 ( cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state) was breaking suspend on laptops, as reported in the below link - https://lkml.org/lkml/2011/11/11/164 This was fixed in commit 3439a8da16bcad6b0982ece938c9f8299bb53584 (ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) by removing acpi_idle_suspend flag. - https://lkml.org/lkml/2011/11/14/74 But this did fix did not work on all systems as Suspend/resume regression was reported on Lenovo S10-3 recently by Dave. - https://lkml.org/lkml/2012/5/27/115 It looked like with commit e978aa7d broke suspend and with commit 3439a8da resume was not working with acpi_idle driver. This patch fixes the regression that caused this issue in the first place. acpi_idle_suspend flag is essential on some x86 systems to prevent the cpus from going to deeper C-states when suspend is triggered ( commit b04e7bdb984 ) So reverting the commit 3439a8da is essential. By default, irqs are disabled in cpu_idle arch specific call and re-enabled in idle state return path . During suspend, the acpi_idle_suspend flag is set, which prevents the cpus from going to deeper idle states, it is essential to enabling the irqs in this return path too. To address the suspend issue, we were not re-enabling the interrupts while returning from acpi_idle_enter_bm() routine if acpi_idle_suspend flag is set. and this caused suspend failure. In addition to the above, to improve the readability of the code, return of -ENIVAL is replaced with -EBUSY in acpi_idle_suspend return path. Implying that the system is currently busy when suspend is in progress, which prevents the cpus from entering deeper C-states. Reported-and-Tested-by: Dav Hansen <[email protected]> Tested-by: Preeti Murthy <[email protected]> Signed-off-by: Deepthi Dharwar <[email protected]> Reviewed-by: Srivatsa S Bhat <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2012-06-27ARM: OMAP4470: Fix OMAP4470 boot failureJon Hunter1-1/+4
OMAP4470 currently fails to boot, printing various messages such as ... omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck omap_hwmod: mpu: cannot _init_clocks ------------[ cut here ]------------ WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4() omap_hwmod: mpu: couldn't init clocks Modules linked in: [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64) [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4) [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c) [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30) [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304) [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044) ---[ end trace 1b75b31a2719ed1c ]--- The problem is that currently none of the clocks are being registered for OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics. This fix allows the kernel to boot without failure using a simple RAMDISK file system on OMAP4470 blaze board. Per feedback from Paul and Benoit the 4470 clock data is incomplete for new modules such as the 2D graphics block that has been added to the 4470. Therefore add a warning to indicate that the clock data is incomplete. Cc: Paul Walmsley <[email protected]> Cc: Benoit Cousson <[email protected]> Signed-off-by: Jon Hunter <[email protected]> [[email protected]: updated comments] Signed-off-by: Tony Lindgren <[email protected]>
2012-06-27ASoC: wm5102: Remove unused platform data headerMark Brown1-1/+0
Signed-off-by: Mark Brown <[email protected]>
2012-06-27UBI: correct usage of IS_ENABLED()Brian Norris1-4/+4
Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <[email protected]> Signed-off-by: Artem Bityutskiy <[email protected]>
2012-06-27UBIFS: correct usage of IS_ENABLED()Brian Norris1-4/+4
Commit "818039c UBIFS: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <[email protected]> Signed-off-by: Artem Bityutskiy <[email protected]>
2012-06-27ALSA: snd-usb-caiaq: initialize card pointerDaniel Mack1-1/+1
Fixes the following warning: CC [M] sound/usb/caiaq/device.o sound/usb/caiaq/device.c: In function ‘snd_probe’: sound/usb/caiaq/device.c:500:16: warning: ‘card’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Daniel Mack <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-06-27can: flexcan: use be32_to_cpup to handle the value of dt entryHui Wang1-2/+2
The freescale arm i.MX series platform can support this driver, and usually the arm cpu works in the little endian mode by default, while device tree entry value is stored in big endian format, we should use be32_to_cpup() to handle them, after modification, it can work well both on the le cpu and be cpu. Cc: stable <[email protected]> # v3.2+ Cc: Shawn Guo <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2012-06-27drm/nouveau: add license header to prime.Dave Airlie1-0/+23
Just forgot this when I posted it, and yes I'm the only person to have changed the file since. Signed-off-by: Dave Airlie <[email protected]>
2012-06-27xen/netfront: teardown the device before unregistering it.Ian Campbell1-4/+4
Fixes: [ 15.470311] WARNING: at /local/scratch/ianc/devel/kernels/linux/fs/sysfs/file.c:498 sysfs_attr_ns+0x95/0xa0() [ 15.470326] sysfs: kobject eth0 without dirent [ 15.470333] Modules linked in: [ 15.470342] Pid: 12, comm: xenwatch Not tainted 3.4.0-x86_32p-xenU #93 and [ 9.150554] BUG: unable to handle kernel paging request at 2b359000 [ 9.150577] IP: [<c1279561>] linkwatch_do_dev+0x81/0xc0 [ 9.150592] *pdpt = 000000002c3c9027 *pde = 0000000000000000 [ 9.150604] Oops: 0002 [#1] SMP [ 9.150613] Modules linked in: This is http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=675190 Reported-by: George Shuklin <[email protected]> Signed-off-by: Ian Campbell <[email protected]> Tested-by: William Dauchy <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2012-06-26bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)stephen hemminger3-1/+3
This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-06-26vhost: use USER_DS in vhost_worker threadJens Freimann1-0/+3
On some architectures address spaces are set up in a way that this is not necessary to work properly but on some others (like s390) it is. Make sure we operate on the user address space to allow copy_xxx_user() from the vhost_worker() thread by setting it explicitly before calling use_mm() and revert it after unuse_mm(). Signed-off-by: Jens Freimann <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-06-27ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entrySachin Kamat1-4/+4
Commit 20ef9e08 ("ARM: EXYNOS: Support DMA for EXYNOS5250 SoC") renamed EXYNOS4_DEV_DMA to EXYNOS_DEV_DMA. But some machine entries still had EXYNOS4_DEV_DMA. Changed them to EXYNOS_DEV_DMA. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Kukjin Kim <[email protected]>
2012-06-26ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDPAlexander Duyck3-7/+13
FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Phil Schmitt <[email protected]> Tested-by: Ross Brattain <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-06-26net: l2tp_eth: use LLTX to avoid LOCKDEP splatsEric Dumazet1-11/+32
Denys Fedoryshchenko reported a LOCKDEP issue with l2tp code. [ 8683.927442] ====================================================== [ 8683.927555] [ INFO: possible circular locking dependency detected ] [ 8683.927672] 3.4.1-build-0061 #14 Not tainted [ 8683.927782] ------------------------------------------------------- [ 8683.927895] swapper/0/0 is trying to acquire lock: [ 8683.928007] (slock-AF_INET){+.-...}, at: [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [ 8683.928121] but task is already holding lock: [ 8683.928121] (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] which lock already depends on the new lock. [ 8683.928121] [ 8683.928121] [ 8683.928121] the existing dependency chain (in reverse order) is: [ 8683.928121] [ 8683.928121] -> #1 (_xmit_ETHER#2){+.-...}: [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<c0304e0c>] ip_send_reply+0xf2/0x1ce [ 8683.928121] [<c0317dbc>] tcp_v4_send_reset+0x153/0x16f [ 8683.928121] [<c0317f4a>] tcp_v4_do_rcv+0x172/0x194 [ 8683.928121] [<c031929b>] tcp_v4_rcv+0x387/0x5a0 [ 8683.928121] [<c03001d0>] ip_local_deliver_finish+0x13a/0x1e9 [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c030075b>] ip_local_deliver+0x41/0x45 [ 8683.928121] [<c03005dd>] ip_rcv_finish+0x31a/0x33c [ 8683.928121] [<c0300645>] NF_HOOK.clone.11+0x46/0x4d [ 8683.928121] [<c0300960>] ip_rcv+0x201/0x23d [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02deae8>] netif_receive_skb+0x4e/0x7d [ 8683.928121] [<e08d5ef3>] rtl8139_poll+0x243/0x33d [8139too] [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] -> #0 (slock-AF_INET){+.-...}: [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [ 8683.928121] other info that might help us debug this: [ 8683.928121] [ 8683.928121] Possible unsafe locking scenario: [ 8683.928121] [ 8683.928121] CPU0 CPU1 [ 8683.928121] ---- ---- [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] lock(_xmit_ETHER#2); [ 8683.928121] lock(slock-AF_INET); [ 8683.928121] [ 8683.928121] *** DEADLOCK *** [ 8683.928121] [ 8683.928121] 3 locks held by swapper/0/0: [ 8683.928121] #0: (rcu_read_lock){.+.+..}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #1: (rcu_read_lock_bh){.+....}, at: [<c02dbc10>] rcu_lock_acquire+0x0/0x30 [ 8683.928121] #2: (_xmit_ETHER#2){+.-...}, at: [<c02f062d>] sch_direct_xmit+0x36/0x119 [ 8683.928121] [ 8683.928121] stack backtrace: [ 8683.928121] Pid: 0, comm: swapper/0 Not tainted 3.4.1-build-0061 #14 [ 8683.928121] Call Trace: [ 8683.928121] [<c034bdd2>] ? printk+0x18/0x1a [ 8683.928121] [<c0158904>] print_circular_bug+0x1ac/0x1b6 [ 8683.928121] [<c0159f1b>] __lock_acquire+0x9a3/0xc27 [ 8683.928121] [<c015a561>] lock_acquire+0x71/0x85 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<c034da2d>] _raw_spin_lock+0x33/0x40 [ 8683.928121] [<e0fc73ec>] ? l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fc73ec>] l2tp_xmit_skb+0x173/0x47e [l2tp_core] [ 8683.928121] [<e0fe31fb>] l2tp_eth_dev_xmit+0x1a/0x2f [l2tp_eth] [ 8683.928121] [<c02e01e7>] dev_hard_start_xmit+0x333/0x3f2 [ 8683.928121] [<c02f064c>] sch_direct_xmit+0x55/0x119 [ 8683.928121] [<c02e0528>] dev_queue_xmit+0x282/0x418 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f524>] arp_xmit+0x22/0x24 [ 8683.928121] [<c02e02a6>] ? dev_hard_start_xmit+0x3f2/0x3f2 [ 8683.928121] [<c031f567>] arp_send+0x41/0x48 [ 8683.928121] [<c031fa7d>] arp_process+0x289/0x491 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c031f4fb>] NF_HOOK.clone.19+0x45/0x4c [ 8683.928121] [<c031f7a0>] arp_rcv+0xb1/0xc3 [ 8683.928121] [<c031f7f4>] ? __neigh_lookup.clone.20+0x42/0x42 [ 8683.928121] [<c02de91b>] __netif_receive_skb+0x329/0x378 [ 8683.928121] [<c02de9d3>] process_backlog+0x69/0x130 [ 8683.928121] [<c02df103>] net_rx_action+0x90/0x15d [ 8683.928121] [<c012b2b5>] __do_softirq+0x7b/0x118 [ 8683.928121] [<c012b23a>] ? local_bh_enable+0xd/0xd [ 8683.928121] <IRQ> [<c012b4d0>] ? irq_exit+0x41/0x91 [ 8683.928121] [<c0103c6f>] ? do_IRQ+0x79/0x8d [ 8683.928121] [<c0157ea1>] ? trace_hardirqs_off_caller+0x2e/0x86 [ 8683.928121] [<c034ef6e>] ? common_interrupt+0x2e/0x34 [ 8683.928121] [<c0108a33>] ? default_idle+0x23/0x38 [ 8683.928121] [<c01091a8>] ? cpu_idle+0x55/0x6f [ 8683.928121] [<c033df25>] ? rest_init+0xa1/0xa7 [ 8683.928121] [<c033de84>] ? __read_lock_failed+0x14/0x14 [ 8683.928121] [<c0498745>] ? start_kernel+0x303/0x30a [ 8683.928121] [<c0498209>] ? repair_env_string+0x51/0x51 [ 8683.928121] [<c04980a8>] ? i386_start_kernel+0xa8/0xaf It appears that like most virtual devices, l2tp should be converted to LLTX mode. This patch takes care of statistics using atomic_long in both RX and TX paths, and fix a bug in l2tp_eth_dev_recv(), which was caching skb->data before a pskb_may_pull() call. Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Denys Fedoryshchenko <[email protected]> Cc: James Chapman <[email protected]> Cc: Hong zhi guo <[email protected]> Cc: Francois Romieu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-06-26USB: CP210x Add 10 Device IDsCraig Shelley1-0/+11
This patch adds 10 device IDs for CP210x based devices from the following manufacturers: Timewave Clipsal Festo Link Instruments Signed-off-by: Craig Shelley <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-06-26USB: option: Add USB ID for Novatel Ovation MC551Forest Bond1-0/+3
This device is also known as the Verizon USB551L. Signed-off-by: Forest Bond <[email protected]> Acked-by: Dan Williams <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-06-26usb: phy: Fix Kconfig dependency for Phy driversAlexandre Pereira da Silva2-3/+3
USB phy layer driver are only built if usb host is selected, but they are used too by USB_GADGET drivers Signed-off-by: Alexandre Pereira da Silva <[email protected]> Acked-by: Roland Stigge <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-06-26Revert "mmc: omap_hsmmc: Enable Auto CMD12"Ming Lei1-12/+3
This patch reverts the commit dba3c29ea4a1d5d544. After bisecting, this commit dba3c29 is found to ruin micro-SD card data (writing incorrect file, or fs is corrupt after several times mount) on the beagle-xm revB, and reverting the commit will fix the problem. Also from TRM of OMAP3/OMAP4/DM37x, the below is mentioned about the Auto CMD12 Enable bit. - SDIO does not support this feature. - SD card only. Looks it is not suitable to always enable Auto CMD12 in host controller driver. Considered that the commit is not mature enough, so ask to revert it first. Cc: Balaji T K <[email protected]> Cc: Venkatraman S <[email protected]> Buglink: https://lkml.org/lkml/2012/6/10/225 Reported-by: Paolo Pisati <[email protected]> Reported-bisected-and-tested-by: Ming Lei <[email protected]> Signed-off-by: Ming Lei <[email protected]> Acked-by: Venkatraman S <[email protected]> Signed-off-by: Chris Ball <[email protected]>