Age | Commit message (Collapse) | Author | Files | Lines |
|
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64.
This allows each ftrace callsite to provide an ftrace_ops to the common
ftrace trampoline, allowing each callsite to invoke distinct tracer
functions without the need to fall back to list processing or to
allocate custom trampolines for each callsite. This significantly speeds
up cases where multiple distinct trace functions are used and callsites
are mostly traced by a single tracer.
The main idea is to place a pointer to the ftrace_ops as a literal at a
fixed offset from the function entry point, which can be recovered by
the common ftrace trampoline. Using a 64-bit literal avoids branch range
limitations, and permits the ops to be swapped atomically without
special considerations that apply to code-patching. In future this will
also allow for the implementation of DYNAMIC_FTRACE_WITH_DIRECT_CALLS
without branch range limitations by using additional fields in struct
ftrace_ops.
As noted in the core patch adding support for
DYNAMIC_FTRACE_WITH_CALL_OPS, this approach allows for directly invoking
ftrace_ops::func even for ftrace_ops which are dynamically-allocated (or
part of a module), without going via ftrace_ops_list_func.
Currently, this approach is not compatible with CLANG_CFI, as the
presence/absence of pre-function NOPs changes the offset of the
pre-function type hash, and there's no existing mechanism to ensure a
consistent offset for instrumented and uninstrumented functions. When
CLANG_CFI is enabled, the existing scheme with a global ops->func
pointer is used, and there should be no functional change. I am
currently working with others to allow the two to work together in
future (though this will liekly require updated compiler support).
I've benchamrked this with the ftrace_ops sample module [1], which is
not currently upstream, but available at:
https://lore.kernel.org/lkml/[email protected]
git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux.git ftrace-ops-sample-20230109
Using that module I measured the total time taken for 100,000 calls to a
trivial instrumented function, with a number of tracers enabled with
relevant filters (which would apply to the instrumented function) and a
number of tracers enabled with irrelevant filters (which would not apply
to the instrumented function). I tested on an M1 MacBook Pro, running
under a HVF-accelerated QEMU VM (i.e. on real hardware).
Before this patch:
Number of tracers || Total time | Per-call average time (ns)
Relevant | Irrelevant || (ns) | Total | Overhead
=========+============++=============+==============+============
0 | 0 || 94,583 | 0.95 | -
0 | 1 || 93,709 | 0.94 | -
0 | 2 || 93,666 | 0.94 | -
0 | 10 || 93,709 | 0.94 | -
0 | 100 || 93,792 | 0.94 | -
---------+------------++-------------+--------------+------------
1 | 1 || 6,467,833 | 64.68 | 63.73
1 | 2 || 7,509,708 | 75.10 | 74.15
1 | 10 || 23,786,792 | 237.87 | 236.92
1 | 100 || 106,432,500 | 1,064.43 | 1063.38
---------+------------++-------------+--------------+------------
1 | 0 || 1,431,875 | 14.32 | 13.37
2 | 0 || 6,456,334 | 64.56 | 63.62
10 | 0 || 22,717,000 | 227.17 | 226.22
100 | 0 || 103,293,667 | 1032.94 | 1031.99
---------+------------++-------------+--------------+--------------
Note: per-call overhead is estimated relative to the baseline case
with 0 relevant tracers and 0 irrelevant tracers.
After this patch
Number of tracers || Total time | Per-call average time (ns)
Relevant | Irrelevant || (ns) | Total | Overhead
=========+============++=============+==============+============
0 | 0 || 94,541 | 0.95 | -
0 | 1 || 93,666 | 0.94 | -
0 | 2 || 93,709 | 0.94 | -
0 | 10 || 93,667 | 0.94 | -
0 | 100 || 93,792 | 0.94 | -
---------+------------++-------------+--------------+------------
1 | 1 || 281,000 | 2.81 | 1.86
1 | 2 || 281,042 | 2.81 | 1.87
1 | 10 || 280,958 | 2.81 | 1.86
1 | 100 || 281,250 | 2.81 | 1.87
---------+------------++-------------+--------------+------------
1 | 0 || 280,959 | 2.81 | 1.86
2 | 0 || 6,502,708 | 65.03 | 64.08
10 | 0 || 18,681,209 | 186.81 | 185.87
100 | 0 || 103,550,458 | 1,035.50 | 1034.56
---------+------------++-------------+--------------+------------
Note: per-call overhead is estimated relative to the baseline case
with 0 relevant tracers and 0 irrelevant tracers.
As can be seen from the above:
a) Whenever there is a single relevant tracer function associated with a
tracee, the overhead of invoking the tracer is constant, and does not
scale with the number of tracers which are *not* associated with that
tracee.
b) The overhead for a single relevant tracer has dropped to ~1/7 of the
overhead prior to this series (from 13.37ns to 1.86ns). This is
largely due to permitting calls to dynamically-allocated ftrace_ops
without going through ftrace_ops_list_func.
I've run the ftrace selftests from v6.2-rc3, which reports:
| # of passed: 110
| # of failed: 0
| # of unresolved: 3
| # of untested: 0
| # of unsupported: 0
| # of xfailed: 1
| # of undefined(test bug): 0
... where the unresolved entries were the tests for DIRECT functions
(which are not supported), and the checkbashisms selftest (which is
irrelevant here):
| [8] Test ftrace direct functions against tracers [UNRESOLVED]
| [9] Test ftrace direct functions against kprobes [UNRESOLVED]
| [62] Meta-selftest: Checkbashisms [UNRESOLVED]
... with all other tests passing (or failing as expected).
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In commit:
26299b3f6ba26bfc ("ftrace: arm64: move from REGS to ARGS")
... we folded ftrace_regs_entry into ftrace_caller, and
ftrace_regs_entry no longer exists.
Update the comment accordingly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In subsequent patches we'll need to atomically write to a
naturally-aligned 64-bit literal embedded within the kernel text.
Add a helper for this. For consistency with other text patching code we
use copy_to_kernel_nofault(), which is atomic for naturally-aligned
accesses up to 64-bits.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In subsequent patches we'd like to check whether an instruction is a
BTI. In preparation for this, add basic instruction helpers for BTI
instructions.
Per ARM DDI 0487H.a section C6.2.41, BTI is encoded in binary as
follows, MSB to LSB:
1101 0101 000 0011 0010 0100 xx01 1111
Where the `xx` bits encode J/C/JC:
00 : (omitted)
01 : C
10 : J
11 : JC
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
On arm64 we don't align assembly function in the same way as C
functions. This somewhat limits the utility of
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B for testing, and adds noise when
testing that we're correctly aligning functions as will be necessary for
ftrace in subsequent patches.
Follow the example of x86, and align assembly functions in the same way
as C functions. Selecting FUNCTION_ALIGNMENT_4B ensures
CONFIG_FUCTION_ALIGNMENT will be a minimum of 4 bytes, matching the
minimum alignment that __ALIGN and __ALIGN_STR provide prior to this
patch.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel, and looking for misaligned text symbols:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
Before, v6.2-rc3 + fixed __cold + fixed ACPICA:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
323
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
After:
# uname -rm
6.2.0-rc3-00003-g71db61ee3ea1 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
112
Considering the remaining 112 unaligned text symbols:
* 20 are non-function KVM NVHE assembly symbols, which are never
instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __kvm_nvhe | wc -l
20
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __kvm_nvhe
ffffbe6483f73784 t __kvm_nvhe___invalid
ffffbe6483f73788 t __kvm_nvhe___do_hyp_init
ffffbe6483f73ab0 t __kvm_nvhe_reset
ffffbe6483f73b8c T __kvm_nvhe___hyp_idmap_text_end
ffffbe6483f73b8c T __kvm_nvhe___hyp_text_start
ffffbe6483f77864 t __kvm_nvhe___host_enter_restore_full
ffffbe6483f77874 t __kvm_nvhe___host_enter_for_panic
ffffbe6483f778a4 t __kvm_nvhe___host_enter_without_restoring
ffffbe6483f81178 T __kvm_nvhe___guest_exit_panic
ffffbe6483f811c8 T __kvm_nvhe___guest_exit
ffffbe6483f81354 t __kvm_nvhe_abort_guest_exit_start
ffffbe6483f81358 t __kvm_nvhe_abort_guest_exit_end
ffffbe6483f81830 t __kvm_nvhe_wa_epilogue
ffffbe6483f81844 t __kvm_nvhe_el1_trap
ffffbe6483f81864 t __kvm_nvhe_el1_fiq
ffffbe6483f81864 t __kvm_nvhe_el1_irq
ffffbe6483f81884 t __kvm_nvhe_el1_error
ffffbe6483f818a4 t __kvm_nvhe_el2_sync
ffffbe6483f81920 t __kvm_nvhe_el2_error
ffffbe6483f865c8 T __kvm_nvhe___start___kvm_ex_table
* 53 are position-independent functions only used during early boot, which are
built with '-Os', but are never instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep __pi | wc -l
53
We *could* drop '-Os' when building these for consistency, but that is
not necessary to ensure that ftrace works correctly.
* The remaining 39 are non-function symbols, and 3 runtime BPF
functions, which are never instrumented by ftrace:
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep -v __kvm_nvhe | grep -v __pi | wc -l
39
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep -v __kvm_nvhe | grep -v __pi
ffffbe6482e1009c T __irqentry_text_end
ffffbe6482e10358 T __softirqentry_text_end
ffffbe6482e1435c T __entry_text_end
ffffbe6482e825f8 T __guest_exit_panic
ffffbe6482e82648 T __guest_exit
ffffbe6482e827d4 t abort_guest_exit_start
ffffbe6482e827d8 t abort_guest_exit_end
ffffbe6482e83030 t wa_epilogue
ffffbe6482e83044 t el1_trap
ffffbe6482e83064 t el1_fiq
ffffbe6482e83064 t el1_irq
ffffbe6482e83084 t el1_error
ffffbe6482e830a4 t el2_sync
ffffbe6482e83120 t el2_error
ffffbe6482e93550 T sha256_block_neon
ffffbe64830f3ae0 t e843419@01cc_00002a0c_3104
ffffbe648378bd90 t e843419@09b3_0000d7cb_bc4
ffffbe6483bdab20 t e843419@0c66_000116e2_34c8
ffffbe6483f62c94 T __noinstr_text_end
ffffbe6483f70a18 T __sched_text_end
ffffbe6483f70b2c T __cpuidle_text_end
ffffbe6483f722d4 T __lock_text_end
ffffbe6483f73b8c T __hyp_idmap_text_end
ffffbe6483f73b8c T __hyp_text_start
ffffbe6483f865c8 T __start___kvm_ex_table
ffffbe6483f870d0 t init_el1
ffffbe6483f870f8 t init_el2
ffffbe6483f87324 t pen
ffffbe6483f87b48 T __idmap_text_end
ffffbe64848eb010 T __hibernate_exit_text_start
ffffbe64848eb124 T __hibernate_exit_text_end
ffffbe64848eb124 T __relocate_new_kernel_start
ffffbe64848eb260 T __relocate_new_kernel_end
ffffbe648498a8e8 T _einittext
ffffbe648498a8e8 T __exittext_begin
ffffbe6484999d84 T __exittext_end
ffff8000080756b4 t bpf_prog_6deef7357e7b4530 [bpf]
ffff80000808dd78 t bpf_prog_6deef7357e7b4530 [bpf]
ffff80000809d684 t bpf_prog_6deef7357e7b4530 [bpf]
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The ACPICA code has been built with '-Os' since the beginning of git
history, though there's no explanatory comment as to why.
This is unfortunate as GCC drops the alignment specificed by
'-falign-functions=N' when '-Os' is used, as reported in GCC bug 88345:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
This prevents CONFIG_FUNCTION_ALIGNMENT and
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect
on the ACPICA code. This is doubly unfortunate as in subsequent patches
arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace
implementation.
Drop the '-Os' flag when building the ACPICA code. With this removed,
the code builds cleanly and works correctly in testing so far.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel using ACPI, and looking for misaligned
text symbols:
* arm64:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
After:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
323
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
* x86_64:
Before, v6.2-rc3:
# uname -rm
6.2.0-rc3 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
11537
Before, v6.2-rc3 + fixed __cold:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
2805
After:
# uname -rm
6.2.0-rc3-00002-g267bddc38572 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
1357
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | grep acpi | wc -l
0
With the patch applied, the remaining unaligned text labels are a
combination of static call trampolines and labels in assembly, which can
be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Robert Moore <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Contemporary versions of GCC (e.g. GCC 12.2.0) drop the alignment
specified by '-falign-functions=N' for functions marked with the
__cold__ attribute, and potentially for callees of __cold__ functions as
these may be implicitly marked as __cold__ by the compiler. LLVM appears
to respect '-falign-functions=N' in such cases.
This has been reported to GCC in bug 88345:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
... which also covers alignment being dropped when '-Os' is used, which
will be addressed in a separate patch.
Currently, use of '-falign-functions=N' is limited to
CONFIG_FUNCTION_ALIGNMENT, which is largely used for performance and/or
analysis reasons (e.g. with CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B), but
isn't necessary for correct functionality. However, this dropped
alignment isn't great for the performance and/or analysis cases.
Subsequent patches will use CONFIG_FUNCTION_ALIGNMENT as part of arm64's
ftrace implementation, which will require all instrumented functions to
be aligned to at least 8-bytes.
This patch works around the dropped alignment by avoiding the use of the
__cold__ attribute when CONFIG_FUNCTION_ALIGNMENT is non-zero, and by
specifically aligning abort(), which GCC implicitly marks as __cold__.
As the __cold macro is now dependent upon config options (which is
against the policy described at the top of compiler_attributes.h), it is
moved into compiler_types.h.
I've tested this by building and booting a kernel configured with
defconfig + CONFIG_EXPERT=y + CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
and looking for misaligned text symbols in /proc/kallsyms:
* arm64:
Before:
# uname -rm
6.2.0-rc3 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
5009
After:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 aarch64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
919
* x86_64:
Before:
# uname -rm
6.2.0-rc3 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
11537
After:
# uname -rm
6.2.0-rc3-00001-g2a2bedf8bfa9 x86_64
# grep ' [Tt] ' /proc/kallsyms | grep -iv '[048c]0 [Tt] ' | wc -l
2805
There's clearly a substantial reduction in the number of misaligned
symbols. From manual inspection, the remaining unaligned text labels are
a combination of ACPICA functions (due to the use of '-Os'), static call
trampolines, and non-function labels in assembly, which will be dealt
with in subsequent patches.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Architectures without dynamic ftrace trampolines incur an overhead when
multiple ftrace_ops are enabled with distinct filters. in these cases,
each call site calls a common trampoline which uses
ftrace_ops_list_func() to iterate over all enabled ftrace functions, and
so incurs an overhead relative to the size of this list (including RCU
protection overhead).
Architectures with dynamic ftrace trampolines avoid this overhead for
call sites which have a single associated ftrace_ops. In these cases,
the dynamic trampoline is customized to branch directly to the relevant
ftrace function, avoiding the list overhead.
On some architectures it's impractical and/or undesirable to implement
dynamic ftrace trampolines. For example, arm64 has limited branch ranges
and cannot always directly branch from a call site to an arbitrary
address (e.g. from a kernel text address to an arbitrary module
address). Calls from modules to core kernel text can be indirected via
PLTs (allocated at module load time) to address this, but the same is
not possible from calls from core kernel text.
Using an indirect branch from a call site to an arbitrary trampoline is
possible, but requires several more instructions in the function
prologue (or immediately before it), and/or comes with far more complex
requirements for patching.
Instead, this patch adds a new option, where an architecture can
associate each call site with a pointer to an ftrace_ops, placed at a
fixed offset from the call site. A shared trampoline can recover this
pointer and call ftrace_ops::func() without needing to go via
ftrace_ops_list_func(), avoiding the associated overhead.
This avoids issues with branch range limitations, and avoids the need to
allocate and manipulate dynamic trampolines, making it far simpler to
implement and maintain, while having similar performance
characteristics.
Note that this allows for dynamic ftrace_ops to be invoked directly from
an architecture's ftrace_caller trampoline, whereas existing code forces
the use of ftrace_ops_get_list_func(), which is in part necessary to
permit the ftrace_ops to be freed once unregistered *and* to avoid
branch/address-generation range limitation on some architectures (e.g.
where ops->func is a module address, and may be outside of the direct
branch range for callsites within the main kernel image).
The CALL_OPS approach avoids this problems and is safe as:
* The existing synchronization in ftrace_shutdown() using
ftrace_shutdown() using synchronize_rcu_tasks_rude() (and
synchronize_rcu_tasks()) ensures that no tasks hold a stale reference
to an ftrace_ops (e.g. in the middle of the ftrace_caller trampoline,
or while invoking ftrace_ops::func), when that ftrace_ops is
unregistered.
Arguably this could also be relied upon for the existing scheme,
permitting dynamic ftrace_ops to be invoked directly when ops->func is
in range, but this will require additional logic to handle branch
range limitations, and is not handled by this patch.
* Each callsite's ftrace_ops pointer literal can hold any valid kernel
address, and is updated atomically. As an architecture's ftrace_caller
trampoline will atomically load the ops pointer then dereference
ops->func, there is no risk of invoking ops->func with a mismatches
ops pointer, and updates to the ops pointer do not require special
care.
A subsequent patch will implement architectures support for arm64. There
should be no functional change as a result of this patch alone.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Cc: Florent Revest <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Three fixes for various bogosity in our linker script, revealed
by the recent commit which changed discard behaviour with some
toolchains.
* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vmlinux.lds: Don't discard .comment
powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
|
|
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
|
|
Pull cifs fixes from Steve French:
"cifs/smb3 client fixes:
- two multichannel fixes
- three reconnect fixes
- unmap fix"
* tag '6.2-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix interface count calculation during refresh
cifs: refcount only the selected iface during interface update
cifs: protect access of TCP_Server_Info::{dstaddr,hostname}
cifs: fix race in assemble_neg_contexts()
cifs: ignore ipc reconnect failures during dfs failover
cifs: Fix kmap_local_page() unmapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
of/fdt: run soc memory setup when early_init_dt_scan_memory fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were
on the mailing list for a long time and passed all the 0-day bot
testing so all should be fine with them as well"
* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Ignore End Transfer delay on teardown
usb: dwc3: xilinx: include linux/gpio/consumer.h
usb: fotg210-udc: fix error return code in fotg210_udc_probe()
usb: fotg210: fix OTG-only build
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
|
|
Pull rdma fixes from Jason Gunthorpe:
"Most noticeable is that Yishai found a big data corruption regression
due to a change in the scatterlist:
- Do not wrongly combine non-contiguous pages in scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to merge contiguous pages into the last SG properly
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
RDMA/srp: Move large values to a new enum for gcc13
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: readd -w option when vmlinux.o or Module.symver is missing
kbuild: fix single *.ko build
|
|
Pull drm fixes from Daniel Vetter:
"Still not much, but more than last week. Dave should be back next week
from the beaching.
drivers:
- i915-gvt fixes
- amdgpu/kfd fixes
- panfrost bo refcounting fix
- meson afbc corruption fix
- imx plane width fix
core:
- drm/sched fixes
- drm/mm kunit test fix
- dma-buf export error handling fixes"
* tag 'drm-fixes-2023-01-06' of git://anongit.freedesktop.org/drm/drm:
Revert "drm/amd/display: Enable Freesync Video Mode by default"
drm/i915/gvt: fix double free bug in split_2MB_gtt_entry
drm/i915/gvt: use atomic operations to change the vGPU status
drm/i915/gvt: fix vgpu debugfs clean in remove
drm/i915/gvt: fix gvt debugfs destroy
drm/i915: unpin on error in intel_vgpu_shadow_mm_pin()
drm/amd/display: Uninitialized variables causing 4k60 UCLK to stay at DPM1 and not DPM0
drm/amdkfd: Fix kernel warning during topology setup
drm/scheduler: Fix lockup in drm_sched_entity_kill()
drm/imx: ipuv3-plane: Fix overlay plane width
drm/scheduler: Fix lockup in drm_sched_entity_kill()
drm/virtio: Fix memory leak in virtio_gpu_object_create()
drm/meson: Reduce the FIFO lines held when AFBC is not used
drm/tests: reduce drm_mm_test stack usage
drm/panfrost: Fix GEM handle creation ref-counting
drm/plane-helper: Add the missing declaration of drm_atomic_state
dma-buf: fix dma_buf_export init order v2
|
|
TPM 1 is sometimes broken across system suspends, due to races or
locking issues or something else that haven't been diagnosed or fixed
yet, most likely having to do with concurrent reads from the TPM's
hardware random number generator driver. These issues prevent the system
from actually suspending, with errors like:
tpm tpm0: A TPM error (28) occurred continue selftest
...
tpm tpm0: A TPM error (28) occurred attempting get random
...
tpm tpm0: Error (28) sending savestate before suspend
tpm_tis 00:08: PM: __pnp_bus_suspend(): tpm_pm_suspend+0x0/0x80 returns 28
tpm_tis 00:08: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 28
tpm_tis 00:08: PM: failed to suspend: error 28
PM: Some devices failed to suspend, or early wake event detected
This issue was partially fixed by 23393c646142 ("char: tpm: Protect
tpm_pm_suspend with locks"), in a last minute 6.1 commit that Linus took
directly because the TPM maintainers weren't available. However, it
seems like this just addresses the most common cases of the bug, rather
than addressing it entirely. So there are more things to fix still,
apparently.
In lieu of actually fixing the underlying bug, just allow system suspend
to continue, so that laptops still go to sleep fine. Later, this can be
reverted when the real bug is fixed.
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: [email protected] # 6.1+
Reported-by: Vlastimil Babka <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Acked-by: Luigi Semenzato <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Johannes Altmanninger <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check") fixed
a build warning by turning a comment into a WARN_ON(), but it turns out
that syzbot then complains because it can trigger said warning with a
corrupted hfs image.
The warning actually does warn about a bad situation, but we are much
better off just handling it as the error it is. So rather than warn
about us doing bad things, stop doing the bad things and return -EIO.
While at it, also fix a memory leak that was introduced by an earlier
fix for a similar syzbot warning situation, and add a check for one case
that historically wasn't handled at all (ie neither comment nor
subsequent WARN_ON).
Reported-by: [email protected]
Fixes: 55d1cbbbb29e ("hfs/hfsplus: use WARN_ON for sanity check")
Fixes: 8d824e69d9f3 ("hfs: fix OOB Read in __hfs_brec_find")
Link: https://lore.kernel.org/lkml/[email protected]/
Tested-by: Michael Schmitz <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Viacheslav Dubeyko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
|
|
Pull io_uring fixes from Jens Axboe:
"A few minor fixes that should go into the 6.2 release:
- Fix for a memory leak in io-wq worker creation, if we ultimately
end up canceling the worker creation before it gets created (me)
- lockdep annotations for the CQ locking (Pavel)
- A regression fix for CQ timeout handling (Pavel)
- Ring pinning around deferred task_work fix (Pavel)
- A trivial member move in struct io_ring_ctx, saving us some memory
(me)"
* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
io_uring: fix CQ waiting timeout handling
io_uring: move 'poll_multi_queue' bool in io_ring_ctx
io_uring: lockdep annotate CQ locking
io_uring: pin context while queueing deferred tw
io_uring/io-wq: free worker if task_work creation is canceled
|
|
Pull arm TIF_NOTIFY_SIGNAL fixup from Jens Axboe:
"Hui Tang reported a performance regressions with _TIF_WORK_MASK in
newer kernels, which he tracked to a change that went into 5.11. After
this change, we'll call do_work_pending() more often than we need to,
because we're now testing bits 0..15 rather than just 0..7.
Shuffle the bits around to avoid this"
* tag 'tif-notify-signal-2023-01-06' of git://git.kernel.dk/linux:
ARM: renumber bits related to _TIF_WORK_MASK
|
|
Pull ceph fixes from Ilya Dryomov:
"Two file locking fixes from Xiubo"
* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
ceph: avoid use-after-free in ceph_fl_release_lock()
ceph: switch to vfs_inode_has_locks() to fix file lock bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fixes from Jan Kara:
"Two fixups of the UDF changes that went into 6.2-rc1"
* tag 'fixes_for_v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: initialize newblock to 0
udf: Fix extension of the last extent in the file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression and regular fixes:
- regressions:
- fix assertion condition using = instead of ==
- fix false alert on bad tree level check
- fix off-by-one error in delalloc search during lseek
- fix compat ro feature check at read-write remount
- handle case when read-repair happens with ongoing device replace
- updated error messages"
* tag 'for-6.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix compat_ro checks against remount
btrfs: always report error in run_one_delayed_ref()
btrfs: handle case when repair happens with dev-replace
btrfs: fix off-by-one in delalloc search during lseek
btrfs: fix false alert on bad tree level check
btrfs: add error message for metadata level mismatch
btrfs: fix ASSERT em->len condition in btrfs_get_extent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- use the correct mask for c.jr/c.jalr when decoding instructions
- build fix for get_user() to avoid a sparse warning
* tag 'riscv-for-linus-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: uaccess: fix type of 0 variable on error in get_user()
riscv, kprobes: Stricter c.jr/c.jalr decoding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfault when trying to process tracepoints present in a
perf.data file and not linked with libtraceevent.
- Fix build on uClibc systems by adding missing sys/types.h include,
that was being obtained indirectly which stopped being the case when
tools/lib/traceevent was removed.
- Don't show commands in 'perf help' that depend on linking with
libtraceevent when not building with that library, which is now a
possibility since we no longer ship a copy in tools/lib/traceevent.
- Fix failure in 'perf test' entry testing the combination of 'perf
probe' user space function + 'perf record' + 'perf script' where it
expects a backtrace leading to glibc's inet_pton() from 'ping' that
now happens more than once with glibc 2.35 for IPv6 addreses.
- Fix for the inet_pton perf test on s/390 where
'text_to_binary_address' now appears on the backtrace.
- Fix build error on riscv due to missing header for 'struct
perf_sample'.
- Fix 'make -C tools perf_install' install variant by not propagating
the 'subdir' to submakes for the 'install_headers' targets.
- Fix handling of unsupported cgroup events when using BPF counters in
'perf stat'.
- Count all cgroups, not just the last one when using 'perf stat' and
combining --for-each-cgroup with --bpf-counters.
This makes the output using BPF counters match the output without
using it, which was the intention all along, the output should be the
same using --bpf-counters or not.
- Fix 'perf lock contention' core dump related to not finding the
"__sched_text_end" symbol on s/390.
- Fix build failure when HEAD is signed: exclude the signature from the
version string.
- Add missing closedir() calls to in perf_data__open_dir(), plugging a
fd leak.
* tag 'perf-tools-fixes-for-v6.2-1-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Fix build on uClibc systems by adding missing sys/types.h include
perf stat: Fix handling of --for-each-cgroup with --bpf-counters to match non BPF mode
perf stat: Fix handling of unsupported cgroup events when using BPF counters
perf test record_probe_libc_inet_pton: Fix test on s/390 where 'text_to_binary_address' now appears on the backtrace
perf lock contention: Fix core dump related to not finding the "__sched_text_end" symbol on s/390
perf build: Don't propagate subdir to submakes for install_headers
perf test record_probe_libc_inet_pton: Fix failure due to extra inet_pton() backtrace in glibc >= 2.35
perf tools: Fix segfault when trying to process tracepoints in perf.data and not linked with libtraceevent
perf tools: Don't include signature in version strings
perf help: Use HAVE_LIBTRACEEVENT to filter out unsupported commands
perf tools riscv: Fix build error on riscv due to missing header for 'struct perf_sample'
perf tools: Fix resources leak in perf_data__open_dir()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
"Intel RAPL updates for new model IDs"
* tag 'perf-urgent-2023-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/rapl: Add support for Intel Emerald Rapids
perf/x86/rapl: Add support for Intel Meteor Lake
perf/x86/rapl: Treat Tigerlake like Icelake
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a CFI crash in arm64/sm4 as well as a regression in the
caam driver"
* tag 'v6.2-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/sm4 - fix possible crash with CFI enabled
crypto: caam - fix CAAM io mem access in blob_gen
|
|
If we delay sending End Transfer for Setup TRB to be prepared, we need
to check if the End Transfer was in preparation for a driver
teardown/soft-disconnect. In those cases, just send the End Transfer
command without delay.
In the case of soft-disconnect, there's a very small chance the command
may not go through immediately. But should it happen, the Setup TRB will
be prepared during the polling of the controller halted state, allowing
the command to go through then.
In the case of disabling endpoint due to reconfiguration (e.g.
set_interface(alt-setting) or usb reset), then it's driven by the host.
Typically the host wouldn't immediately cancel the control request and
send another control transfer to trigger the End Transfer command
timeout.
Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status")
Cc: [email protected]
Signed-off-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The newly added gpio consumer calls cause a build failure in configurations
that fail to include the right header implicitly:
drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp':
drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration]
207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
| ^~~~~~~~~~~~~~~~~~~~~~~
| devm_clk_get_optional
Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The clang build reports this error
fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (*err < 0)
^~~~~~~~
newblock is never set before error handling jump.
Initialize newblock to 0 and remove redundant settings.
Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file")
Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
|
|
When extending the last extent in the file within the last block, we
wrongly computed the length of the last extent. This is mostly a
cosmetical problem since the extent does not contain any data and the
length will be fixed up by following operations but still.
Fixes: 1f3868f06855 ("udf: Fix extending file within last block")
Signed-off-by: Jan Kara <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only gvt-fixes:
- debugfs fixes (Zhenyu)
- fix up for vgpu status (Zhi)
- double free fix in split_2MB_gtt_entry (Zheng)
Signed-off-by: Daniel Vetter <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
After commit 5f217ccd520f ("fotg210-udc: Support optional external PHY"),
the error code is re-assigned to 0 in fotg210_udc_probe(), if allocate or
map memory fails after the assignment, it can't return an error code. Set
the error code to -ENOMEM to fix this problem.
Fixes: 5f217ccd520f ("fotg210-udc: Support optional external PHY")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a missing sysfs attribute to the int340x thermal driver (Srinivas
Pandruvada)"
* tag 'thermal-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add missing attribute for data rate base
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
|
If the get_user(x, ptr) has x as a pointer, then the setting
of (x) = 0 is going to produce the following sparse warning,
so fix this by forcing the type of 'x' when access_ok() fails.
fs/aio.c:2073:21: warning: Using plain integer as NULL pointer
Signed-off-by: Ben Dooks <[email protected]>
Reviewed-by: Palmer Dabbelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):
---+-+-----------+-----------+--
100 0 rs1[4:0]!=0 00000 10 : c.jr
100 1 rs1[4:0]!=0 00000 10 : c.jalr
100 0 rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1 rd[4:0]!=0 rs2[4:0]!=0 10 : c.add
The following logic is used to decode c.jr and c.jalr:
insn & 0xf007 == 0x8002 => instruction is an c.jr
insn & 0xf007 == 0x9002 => instruction is an c.jalr
When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.
Correct the decoding by changing the mask from 0xf007 to 0xf07f.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Björn Töpel <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Guo Ren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A reference leak fix, two fixes for using uninitialized variables and
more drivers converted to using immutable irqchips:
- fix a reference leak in gpio-sifive
- fix a potential use of an uninitialized variable in core gpiolib
- fix a potential use of an uninitialized variable in gpio-pca953x
- make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd
and gpio-sprd"
* tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sifive: Fix refcount leak in sifive_gpio_probe
gpio: sprd: Make the irqchip immutable
gpio: pmic-eic-sprd: Make the irqchip immutable
gpio: eic-sprd: Make the irqchip immutable
gpio: pca953x: avoid to use uninitialized value pinctrl
gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
|
|
When sg_alloc_append_table_from_pages() calls to pages_are_mergeable() in
its 'sgt_append->prv' flow to check whether it can merge contiguous pages
into the last SG, it passes the page arguments in the wrong order.
The first parameter should be the next candidate page to be merged to
the last page and not the opposite.
The current code leads to a corrupted SG which resulted in OOPs and
unexpected errors when non-contiguous pages are merged wrongly.
Fix to pass the page parameters in the right order.
Fixes: 1567b49d1a40 ("lib/scatterlist: add check when merging zone device pages")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Yishai Hadas <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix Matrox G200eW initialization failure
- Fix build failure of offb driver when built as module
- Optimize stack usage in omapfb
* tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: omapfb: avoid stack overflow warning
fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB
fbdev: atyfb: use strscpy() to instead of strncpy()
fbdev: omapfb: use strscpy() to instead of strncpy()
fbdev: make offb driver tristate
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Jiffy to ktime CQ waiting conversion broke how we treat timeouts, in
particular we rearm it anew every time we get into
io_cqring_wait_schedule() without adjusting the timeout. Waiting for 2
CQEs and getting a task_work in the middle may double the timeout value,
or even worse in some cases task may wait indefinitely.
Cc: [email protected]
Fixes: 228339662b398 ("io_uring: don't convert to jiffies for waiting on timeouts")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/f7bffddd71b08f28a877d44d37ac953ddb01590d.1672915663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
Although the powerpc linker script mentions .comment in the DISCARD
section, that has never actually caused it to be discarded, because the
earlier ELF_DETAILS macro (previously STABS_DEBUG) explicitly includes
.comment.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro. With binutils < 2.36 that causes the DISCARD directives later in
the script to be applied earlier, causing .comment to actually be
discarded.
It's confusing to explicitly include and discard .comment, and even more
so if the behaviour depends on the toolchain version. So don't discard
.comment in order to maintain the existing behaviour in all cases.
Fixes: 83a092cf95f2 ("powerpc: Link warning for orphan sections")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
ld: warning: discarding dynamic section .rela.init.rodata
Fix it by conditionally discarding .rela* only when CONFIG_RELOCATABLE
is disabled.
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit 99cb0d917ffa ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
1: https://lore.kernel.org/lkml/[email protected]/
Fixes: 99cb0d917ffa ("arch: fix broken BuildID for arm64 and riscv")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
drm-intel-fixes
gvt-fixes-2023-01-05
- Fix one missed unpin in error of intel_vgpu_shadow_mm_pin()
- Fix two debugfs destroy oops issues for vgpu and gvt entries
- Fix one potential double free issue in gtt shadow pt code
- Fix to use atomic bit flag for vgpu status
Signed-off-by: Rodrigo Vivi <[email protected]>
From: Zhenyu Wang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-04:
amdgpu:
- DCN 3.2 fix
- Display fix
amdkfd:
- Fix kernel warning
Signed-off-by: Daniel Vetter <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|