aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-11-07ALSA: hda - Fix invalid connections in VT1802 codecTakashi Iwai1-0/+14
VT1802 codec provides the invalid connection lists of NID 0x24 and 0x33 containing the routes to a non-exist widget 0x3e. This confuses the auto-parser. Fix it up in the driver by overriding these connections. Reported-by: Massimo Del Fedele <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-07ALSA: hda - Fix empty DAC filling in patch_via.cTakashi Iwai1-7/+4
In via_auto_fill_adc_nids(), the parser tries to fill dac_nids[] at the point of the current line-out (i). When no valid path is found for this output, this results in dac = 0, thus it creates a hole in dac_nids[]. This confuses is_empty_dac() and trims the detected DAC in later reference. This patch fixes the bug by appending DAC properly to dac_nids[] in via_auto_fill_adc_nids(). Reported-by: Massimo Del Fedele <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixesLinus Torvalds6-38/+43
Pull gfs2 fixes from Steven Whitehouse: "Here are a number of GFS2 bug fixes. There are three from Andy Price which fix various issues spotted by automated code analysis. There are two from Lukas Czerner fixing my mistaken assumptions as to how FITRIM should work. Finally Ben Marzinski has fixed a bug relating to mmap and atime and also a bug relating to a locking issue in the transaction code." * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: Test bufdata with buffer locked and gfs2_log_lock held GFS2: Don't call file_accessed() with a shared glock GFS2: Fix FITRIM argument handling GFS2: Require user to provide argument for FITRIM GFS2: Clean up some unused assignments GFS2: Fix possible null pointer deref in gfs2_rs_alloc GFS2: Fix an unchecked error from gfs2_rs_alloc
2012-11-07Merge branch 'hwmon-for-linus' of ↵Linus Torvalds7-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix chip feature table headers hwmon: (w83627ehf) Force initial bank selection
2012-11-07GFS2: Test bufdata with buffer locked and gfs2_log_lock heldBenjamin Marzinski2-12/+10
In gfs2_trans_add_bh(), gfs2 was testing if a there was a bd attached to the buffer without having the gfs2_log_lock held. It was then assuming it would stay attached for the rest of the function. However, without either the log lock being held of the buffer locked, __gfs2_ail_flush() could detach bd at any time. This patch moves the locking before the test. If there isn't a bd already attached, gfs2 can safely allocate one and attach it before locking. There is no way that the newly allocated bd could be on the ail list, and thus no way for __gfs2_ail_flush() to detach it. Signed-off-by: Benjamin Marzinski <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Don't call file_accessed() with a shared glockBenjamin Marzinski2-8/+7
file_accessed() was being called by gfs2_mmap() with a shared glock. If it needed to update the atime, it was crashing because it dirtied the inode in gfs2_dirty_inode() without holding an exclusive lock. gfs2_dirty_inode() checked if the caller was already holding a glock, but it didn't make sure that the glock was in the exclusive state. Now, instead of calling file_accessed() while holding the shared lock in gfs2_mmap(), file_accessed() is called after grabbing and releasing the glock to update the inode. If file_accessed() needs to update the atime, it will grab an exclusive lock in gfs2_dirty_inode(). gfs2_dirty_inode() now also checks to make sure that if the calling process has already locked the glock, it has an exclusive lock. Signed-off-by: Benjamin Marzinski <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Fix FITRIM argument handlingLukas Czerner1-3/+17
Currently implementation in gfs2 uses FITRIM arguments as it were in file system blocks units which is wrong. The FITRIM arguments (fstrim_range.start, fstrim_range.len and fstrim_range.minlen) are actually in bytes. Moreover, check for start argument beyond the end of file system, len argument being smaller than file system block and minlen argument being bigger than biggest resource group were missing. This commit converts the code to convert FITRIM argument to file system blocks and also adds appropriate checks mentioned above. All the problems were recognised by xfstests 251 and 260. Signed-off-by: Lukas Czerner <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Require user to provide argument for FITRIMLukas Czerner1-6/+2
When the fstrim_range argument is not provided by user in FITRIM ioctl we should just return EFAULT and not promoting bad behaviour by filling the structure in kernel. Let the user deal with it. Signed-off-by: Lukas Czerner <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Clean up some unused assignmentsAndrew Price2-4/+0
Cleans up two cases where variables were assigned values but then never used again. Signed-off-by: Andrew Price <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Fix possible null pointer deref in gfs2_rs_allocAndrew Price1-3/+2
Despite the return value from kmem_cache_zalloc() being checked, the error wasn't being returned until after a possible null pointer dereference. This patch returns the error immediately, allowing the removal of the error variable. Signed-off-by: Andrew Price <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07GFS2: Fix an unchecked error from gfs2_rs_allocAndrew Price1-2/+5
Check the return value of gfs2_rs_alloc(ip) and avoid a possible null pointer dereference. Signed-off-by: Andrew Price <[email protected]> Signed-off-by: Steven Whitehouse <[email protected]>
2012-11-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2-15/+31
Pull drm fixes from Dave Airlie: "A single radeon typo fix for a regressions and two fixes for a regression in the open helper address space stuff." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix typo in evergreen_mc_resume() drm: set dev_mapping before calling drm_open_helper drm: restore open_count if drm_setup fails
2012-11-07Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds7-29/+21
Pull arm fixes from Russell King: "Not much here again. The two most notable things here are the sched_clock() fix, which was causing problems with the scheduling of threaded IRQs after a suspend event, and the vfp fix, which afaik has only been seen on some older OMAP boards. Nevertheless, both are fairly important fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7569/1: mm: uninitialized warning corrections ARM: 7567/1: io: avoid GCC's offsettable addressing modes for halfword accesses ARM: 7566/1: vfp: fix save and restore when running on pre-VFPv3 and CONFIG_VFPv3 set ARM: 7565/1: sched: stop sched_clock() during suspend
2012-11-07drm/radeon: fix typo in evergreen_mc_resume()Alex Deucher1-1/+1
Add missing index that may have led us to enabling more crtcs than necessary. May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 Signed-off-by: Alex Deucher <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2012-11-07drm: set dev_mapping before calling drm_open_helperIlija Hadzic1-17/+30
Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.html Signed-off-by: Ilija Hadzic <[email protected]> Reported-by: Thomas Hellstrom <[email protected]> Cc: [email protected] Reviewed-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2012-11-07drm: restore open_count if drm_setup failsIlija Hadzic1-1/+4
If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: Ilija Hadzic <[email protected]> Cc: [email protected] Reviewed-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2012-11-06sparc: Allow OF_GPIO on sparc.David S. Miller1-1/+1
Signed-off-by: David S. Miller <[email protected]>
2012-11-06s390/cio: fix length calculation in idset.cSebastian Ott1-2/+1
bitmap_or uses the number of bits as its length parameter and not the number of words necessary to store those bits. This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions Reported-by: Christian Ehrhardt <[email protected]> Acked-by: Peter Oberparleiter <[email protected]> Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-11-06s390/sclp: fix addressing mode clobberHeiko Carstens1-1/+7
The early mini sclp driver may be called in zArch mode either in 31 or 64 bit addressing mode. If called in 31 bit addressing mode the new external interrupt psw however would switch to 64 bit addressing mode. This would cause an addressing exception within the interrupt handler, since the code didn't expect the zArch/31 bit addressing mode combination. Fix this by setting the new psw addressing mode bits so they fit the current addressing mode. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck2-3/+2
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-11-06pinctrl: samsung and exynos need to depend on OF && GPIOLIBAxel Lin1-0/+2
This patch fixes below build error when !CONFIG_OF_GPIO. CC drivers/pinctrl/pinctrl-samsung.o drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_pinctrl_parse_dt_pins': drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable 'prop' [-Wunused-variable] drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/pinctrl-samsung.c:797:5: error: 'struct gpio_chip' has no member named 'of_node' make[2]: *** [drivers/pinctrl/pinctrl-samsung.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 The samsung pinctrl driver supports only device tree enabled platforms. Thus make PINCTRL_SAMSUNG depend on OF && GPIOLIB. The reason to depend on GPIOLIB is CONFIG_OF_GPIO only available when GPIOLIB is selected. Since PINCTRL_EXYNOS4 select PINCTRL_SAMSUNG, thus also make PINCTRL_EXYNOS4 depend on OF && GPIOLIB. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-06ASoC: wm8978: pll incorrectly configured when codec is masterEric Millbrandt1-1/+1
When MCLK is supplied externally and BCLK and LRC are configured as outputs (codec is master), the PLL values are only calculated correctly on the first transmission. On subsequent transmissions, at differenct sample rates, the wrong PLL values are used. Test for f_opclk instead of f_pllout to determine if the PLL values are needed. Signed-off-by: Eric Millbrandt <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2012-11-06modules: don't break modules_install on external modules with no key.Rusty Russell1-1/+2
The script still spits out an error ("Can't read private key") but we don't break modules_install. Reported-by: Bruno Wolff III <[email protected]> Original-patch-by: Josh Boyer <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2012-11-05PCI/portdrv: Don't create hotplug slots unless port supports hotplugTaku Izumi1-1/+2
Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test, so now we create hotplug slots even for PCIe port devices that don't support hotplug. This patch fixes this problem. [bhelgaas: changelog] Signed-off-by: Taku Izumi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Yinghai Lu <[email protected]> Reviewed-by: Jiang Liu <[email protected]>
2012-11-05Merge branch 'pci/huang-d3cold-fixes' into for-linusBjorn Helgaas7-51/+60
* pci/huang-d3cold-fixes: PCI/PM: Fix proc config reg access for D3cold and bridge suspending PCI/PM: Resume device before shutdown PCI/PM: Fix deadlock when unbinding device if parent in D3cold
2012-11-05hwmon: Fix chip feature table headersJean Delvare6-6/+6
These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Guenter Roeck <[email protected]>
2012-11-05hwmon: (w83627ehf) Force initial bank selectionJean Delvare1-0/+1
Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: Jean Delvare <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Cc: [email protected]
2012-11-05PCI/PM: Fix proc config reg access for D3cold and bridge suspendingHuang Ying4-34/+42
In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <[email protected]> Reported-by: Peter <[email protected]> Reported-by: Micael Dias <[email protected]> Signed-off-by: Huang Ying <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> CC: [email protected] # v3.6+
2012-11-05Merge tag 'v3.7-rc4' into upstream-masterCatalin Marinas626-5016/+7780
Linux 3.7-rc4
2012-11-05cifs: Do not lookup hashed negative dentry in cifs_atomic_openSachin Prabhu1-1/+10
We do not need to lookup a hashed negative directory since we have already revalidated it before and have found it to be fine. This also prevents a crash in cifs_lookup() when it attempts to rehash the already hashed negative lookup dentry. The patch has been tested using the reproducer at https://bugzilla.redhat.com/show_bug.cgi?id=867344#c28 Cc: <[email protected]> # 3.6.x Reported-by: Vit Zahradka <[email protected]> Signed-off-by: Sachin Prabhu <[email protected]>
2012-11-05ALSA: hda - Force to reset IEC958 status bits for AD codecsTakashi Iwai1-0/+1
Several bug reports suggest that the forcibly resetting IEC958 status bits is required for AD codecs to get the SPDIF output working properly after changing streams. Original fix credit to Javeed Shaikh. BugLink: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/359361 Reported-by: Robin Kreis <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-05pinctrl: SPEAr1340: Add clcd sleep mode pin configurationVipul Kumar Samar1-1/+38
CLCD pads must be configured differently for sleep mode. This patch adds support for clcd_sleep_pingroup. Signed-off-by: Vipul Kumar Samar <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr1340: Make DDR reset & clock pads as gpioDeepak Sikri1-1/+1
Some gpio pins are used to control DDR reset and clock enable while the system is moved into Low power. This patch adds in the corresponding GPIO entries in the pads_as_gpio_pins to ensure the pads are available as gpio's. Signed-off-by: Deepak Sikri <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr1310: add register entries for enabling pad directionShiraz Hashim1-0/+266
Pad direction must also be updated for SPEAr1310, while setting pads values. This patch adds support for that. Signed-off-by: Shiraz Hashim <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin groupVipul Kumar Samar1-42/+51
SPEAr1310 has separate PCI and PCIe implementations which are not muxed with each other. Presently they have been implemented as muxed together with SATA and are represented wrongly in the software. In reality only PCIe and SATA implementations are muxed with each other. This patch separates out pci pins creating a new pingroup and function for pci. Signed-off-by: Vipul Kumar Samar <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Reviewed-by: Shiraz Hashim <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFTVipul Kumar Samar1-2/+2
This patch fixes two macros: PERIP_CFG registers offset and MCIF selection shift. Signed-off-by: Vipul Kumar Samar <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr1310: fix clcd high resolution pin group nameShiraz Hashim1-1/+1
All group names in SPEAr pinctrl have "_grp" at the end of their name. Do the same for clcd_high_res_grp. Signed-off-by: Shiraz Hashim <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr320: Correct pad mux entries for rmii/smiiDeepak Sikri1-2/+2
pin entries of rmii and smii are interchanged by mistake. Fix it. Signed-off-by: Deepak Sikri <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr3xx: correct register space to configure pwmShiraz Hashim2-0/+5
To have pwm on pad no. 34 we also need to select between pwm and SD_LED functions. Add this to pwm pin mux register configuration. Signed-off-by: Shiraz Hashim <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Reviewed-by: Vipin Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disableViresh Kumar1-1/+1
Not all bits of a register are used for pinctrl in SPEAr. So only update bits relevant to pinctrl using muxreg->mask. Signed-off-by: Viresh Kumar <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2012-11-05ALSA: es1968: Add ESS vendor ID to pm_whitelistOndrej Zary1-0/+2
Add generic ESS vendor ID to pm_whitelist. This should fix suspend on all Maestro-2 and Maestro-2E based PCI cards. Tested on Terratec DMX and SF64-PCE2. Signed-off-by: Ondrej Zary <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-05ALSA: HDA: Mark CS260x immutable structures constDaniel J Blueman1-3/+2
Mark structures that won't change const. Signed-off-by: Daniel J Blueman <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-05ALSA: HDA: Fix digital microphone on CS420xDaniel J Blueman1-5/+9
Correctly enable the digital microphones with the right bits in the right coeffecient registers on Cirrus CS4206/7 codecs. It also prevents misconfiguring ADC1/2. This fixes the digital mic on the Macbook Pro 10,1/Retina. Based-on-patch-by: Alexander Stein <[email protected]> Signed-off-by: Daniel J Blueman <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-05ALSA: hda: Cirrus: Fix coefficient index for beep configurationAlexander Stein1-1/+1
Signed-off-by: Alexander Stein <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-04Linux 3.7-rc4Linus Torvalds1-1/+1
2012-11-04xen/hypercall: fix hypercall fallback code for very old hypervisorsJan Beulich3-15/+88
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jan Beulich <[email protected]> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2012-11-04ARM: 7569/1: mm: uninitialized warning correctionsviresh kumar1-1/+1
The variables here are really not used uninitialized. arch/arm/mm/alignment.c: In function 'do_alignment': arch/arm/mm/alignment.c:327:15: warning: 'offset.un' may be used uninitialized in this function [-Wmaybe-uninitialized] arch/arm/mm/alignment.c:748:21: note: 'offset.un' was declared here Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-11-04ALSA: hda - support Teradici 2200 host card audioLars R. Damerow1-0/+2
The audio chipset used in Teradici's Tera2 host cards is the same as that in the 1200 host cards. This patch allows ALSA to recognize the Tera2 cards. Signed-off-by: Lars R. Damerow <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-04ALSA: Fix typo in drivers soundMasanari Iida6-6/+6
Correct spelling typo in debug messages within drivers/sound Signed-off-by: Masanari Iida <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-11-04net: inet_diag -- Return error code if protocol handler is missedCyrill Gorcunov1-1/+4
We've observed that in case if UDP diag module is not supported in kernel the netlink returns NLMSG_DONE without notifying a caller that handler is missed. This patch makes __inet_diag_dump to return error code instead. So as example it become possible to detect such situation and handle it gracefully on userspace level. Signed-off-by: Cyrill Gorcunov <[email protected]> CC: David Miller <[email protected]> CC: Eric Dumazet <[email protected]> CC: Pavel Emelyanov <[email protected]> Acked-by: Pavel Emelyanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.