Age | Commit message (Collapse) | Author | Files | Lines |
|
Signed-off-by: Nicolai Hähnle <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This catches evictions of shadow page tables from the GART. Since shadow
page tables are always stored in system memory, amdgpu_bo_move is never
called for them.
This fixes a crash during command submission that occurs when only a shadow
page table and no other BOs were evicted since the last submission.
Fixes: 1baa439fb2f4e586 ("drm/amdgpu: allocate shadow for pd/pt bo V2")
Signed-off-by: Nicolai Hähnle <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Ensure that the driver can listen to evictions even when they don't take the
path through ttm_bo_driver::move.
This is crucial for amdgpu, which relies on an eviction counter to skip
re-binding page tables when possible.
Signed-off-by: Nicolai Hähnle <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
1. disable vce cg when vce hw initialize.
2. initizlize vce clock to 10KHz fo dgpu,
so no need to set bypass clock to vce.
Change-Id: I934c2c4820cc95c1bfa2fa41ff0f40a0d3cd1c40
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
in profiling mode, powerplay will fix power state
as stable as possible.and disable gfx cg and LBPW feature.
profile_standard: as a prerequisite, ensure power and thermal
sustainable, set clocks ratio as close to the highest clock
ratio as possible.
profile_min_sclk: fix mclk as profile_normal, set lowest sclk
profile_min_mclk: fix sclk as profile_normal, set lowest mclk
profile_peak: set highest sclk and mclk, power and thermal not
sustainable
profile_exit: exit profile mode. enable gfx cg/lbpw feature.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Updating SQ DIDT settings and block mask
so SQ uses PCC on Polaris11.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
following firmware's request.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Suggested-by: Felix Kuehling <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Cc: William Lewis <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Call detection function driectly, so remove the interface.
V2: ci and si also need to call the detect function.
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Monk Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Xiangliang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Move the detection forward into vi_set_ip_blocks function, then
add ip blocks virtualization need if device is VF.
V2: add ip blocks according to asic type.
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Monk Liu <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Xiangliang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use acronym to rename fields to make easy to spell out.
Signed-off-by: Xiangliang Yu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
KIQ is queue-memory based initialization method: setup KIQ queue
firstly, then send command to KIQ to setup other queues, without
accessing registers.
For virtualization, need KIQ to access virtual function registers
when running on guest mode.
V2: use amdgpu_bo_create/free_kernel to allocate BO.
Signed-off-by: Monk Liu <[email protected]>
Signed-off-by: Xiangliang Yu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
PCI I/O bar can be disabled in VBIOS to save the resource. It is often
disabled in large aperture VBIOS. Don't call it an error.
Signed-off-by: Amber Lin <[email protected]>
Acked-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
1. delete asic_smum_init functions, export asic private functions
to smumgr directly, make code more readable.
2. create asic private data in asic_init_func.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
add pp_smu7_thermal_fini function to free related
data when smu7_hwmgr_fini.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
struct smumgr/hwmgr will be freed on amd_powerplay_destory
and if we free them in one of asic private functions, other private
date may not be freed. for example: power state and power table
in hwmgr.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v2: add pp_check function to check pp_instance
valid.
1. powerplay export two new interface to amdgpu,
amd_powerplay_create/amd_powerplay_destroy.
2. create pp_instance/smumgr/hwmgr/eventmgr in
early init, destroy them when lata_fini.
3. in sw_init, create and init asic private smumgr
data, and free them when sw_fini.
4. in hw_init, create and init asic private hwmgr
data, and free them when hw_fini.
5. export powerplay state: PP_DPM_DISABLED.
when user disabled powerplay or hwmgr/eventmgr
init failed, powerplay return this state to amdgpu.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In some case, App need to run under max stable clock.
so export profiling mode: GFX CG was disabled.
and user can select the max stable clock of the device.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
need to release failed smu firmware before load another
firmware.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
cz_smu_init will be called in sw_init.
so it should not touch other blocks's
firmware as they were not ready.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The powerplay implementation has been the default for a
while now.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch reshuffles headers to define pr_fmt before <linux/xxx.h>.
It can avoid pr_fmt redefine warnning from linux/xxx.h like below:
CC [M] /home/ray/gpu/BUILD/x86_64/linux/drivers/gpu/drm/amd/amdgpu//../powerplay/amd_powerplay.o
/home/ray/gpu/BUILD/x86_64/linux/drivers/gpu/drm/amd/amdgpu//../powerplay/amd_powerplay.c:24:0: warning: "pr_fmt" redefined
#define pr_fmt(fmt) "[powerplay] " fmt
^
In file included from include/linux/kernel.h:13:0,
from include/linux/list.h:8,
from include/linux/agp_backend.h:33,
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Powerplay will use them instead of raw printk, and we can dynamic
change the debug level with it.
The prefix is like below:
[ xxx.xxxxxx] amdgpu: [powerplay] ...
Suggested-by: Grazvydas Ignotas <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Cc: Arindam Nath <[email protected]>
Reviewed-by: Edward O'Callaghan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
move en/disable GFX CP/SMU_HS PG to
function gfx_v8_0_set_powergating_state
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
v2: fix copy error.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are several ways to check out a ATOMBIOS. In previous codes, try
a new way to fetch out vbios/rom, until current vbios/rom is started with
0x55aa, then check if this vbios is ATOMBIOS. Now, try a new way to fetch
out vbios until all flags of ATOMBIOS are verified.
Signed-off-by: Ken Xue <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This is required for DP HBR2 test pattern
Signed-off-by: Harry Wentland <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This is required by HDMI 2.0
Signed-off-by: Harry Wentland <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|