aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-06-30f2fs: fix error path handling in truncate_dnode()Chao Yu1-1/+3
If truncate_node() fails in truncate_dnode(), it missed to call f2fs_put_page(), fix it. Fixes: 7735730d39d7 ("f2fs: fix to propagate error from __get_meta_page()") Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2023-06-30f2fs: fix deadlock in i_xattr_sem and inode page lockJaegeuk Kim2-3/+12
Thread #1: [122554.641906][ T92] f2fs_getxattr+0xd4/0x5fc -> waiting for f2fs_down_read(&F2FS_I(inode)->i_xattr_sem); [122554.641927][ T92] __f2fs_get_acl+0x50/0x284 [122554.641948][ T92] f2fs_init_acl+0x84/0x54c [122554.641969][ T92] f2fs_init_inode_metadata+0x460/0x5f0 [122554.641990][ T92] f2fs_add_inline_entry+0x11c/0x350 -> Locked dir->inode_page by f2fs_get_node_page() [122554.642009][ T92] f2fs_do_add_link+0x100/0x1e4 [122554.642025][ T92] f2fs_create+0xf4/0x22c [122554.642047][ T92] vfs_create+0x130/0x1f4 Thread #2: [123996.386358][ T92] __get_node_page+0x8c/0x504 -> waiting for dir->inode_page lock [123996.386383][ T92] read_all_xattrs+0x11c/0x1f4 [123996.386405][ T92] __f2fs_setxattr+0xcc/0x528 [123996.386424][ T92] f2fs_setxattr+0x158/0x1f4 -> f2fs_down_write(&F2FS_I(inode)->i_xattr_sem); [123996.386443][ T92] __f2fs_set_acl+0x328/0x430 [123996.386618][ T92] f2fs_set_acl+0x38/0x50 [123996.386642][ T92] posix_acl_chmod+0xc8/0x1c8 [123996.386669][ T92] f2fs_setattr+0x5e0/0x6bc [123996.386689][ T92] notify_change+0x4d8/0x580 [123996.386717][ T92] chmod_common+0xd8/0x184 [123996.386748][ T92] do_fchmodat+0x60/0x124 [123996.386766][ T92] __arm64_sys_fchmodat+0x28/0x3c Cc: <[email protected]> Fixes: 27161f13e3c3 "f2fs: avoid race in between read xattr & write xattr" Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2023-06-30sysctl: set variable sysctl_mount_point storage-class-specifier to staticTom Rix1-1/+1
smatch reports fs/proc/proc_sysctl.c:32:18: warning: symbol 'sysctl_mount_point' was not declared. Should it be static? This variable is only used in its defining file, so it should be static. Signed-off-by: Tom Rix <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]>
2023-06-30md/raid0: add discard support for the 'original' layoutJason Baron2-8/+55
We've found that using raid0 with the 'original' layout and discard enabled with different disk sizes (such that at least two zones are created) can result in data corruption. This is due to the fact that the discard handling in 'raid0_handle_discard()' assumes the 'alternate' layout. We've seen this corruption using ext4 but other filesystems are likely susceptible as well. More specifically, while multiple zones are necessary to create the corruption, the corruption may not occur with multiple zones if they layout in such a way the layout matches what the 'alternate' layout would have produced. Thus, not all raid0 devices with the 'original' layout, different size disks and discard enabled will encounter this corruption. The 3.14 kernel inadvertently changed the raid0 disk layout for different size disks. Thus, running a pre-3.14 kernel and post-3.14 kernel on the same raid0 array could corrupt data. This lead to the creation of the 'original' layout (to match the pre-3.14 layout) and the 'alternate' layout (to match the post 3.14 layout) in the 5.4 kernel time frame and an option to tell the kernel which layout to use (since it couldn't be autodetected). However, when the 'original' layout was added back to 5.4 discard support for the 'original' layout was not added leading this issue. I've been able to reliably reproduce the corruption with the following test case: 1. create raid0 array with different size disks using original layout 2. mkfs 3. mount -o discard 4. create lots of files 5. remove 1/2 the files 6. fstrim -a (or just the mount point for the raid0 array) 7. umount 8. fsck -fn /dev/md0 (spews all sorts of corruptions) Let's fix this by adding proper discard support to the 'original' layout. The fix 'maps' the 'original' layout disks to the order in which they are read/written such that we can compare the disks in the same way that the current 'alternate' layout does. A 'disk_shift' field is added to 'struct strip_zone'. This could be computed on the fly in raid0_handle_discard() but by adding this field, we save some computation in the discard path. Note we could also potentially fix this by re-ordering the disks in the zones that follow the first one, and then always read/writing them using the 'alternate' layout. However, that is seen as a more substantial change, and we are attempting the least invasive fix at this time to remedy the corruption. I've verified the change using the reproducer mentioned above. Typically, the corruption is seen after less than 3 iterations, while the patch has run 500+ iterations. Cc: NeilBrown <[email protected]> Cc: Song Liu <[email protected]> Fixes: c84a1372df92 ("md/raid0: avoid RAID0 data corruption due to layout confusion.") Cc: [email protected] Signed-off-by: Jason Baron <[email protected]> Signed-off-by: Song Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-30mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0Nishanth Menon1-3/+9
Sec proxy/message manager data buffer is 60 bytes with the last of the registers indicating transmission completion. This however poses a bit of a challenge. The backing memory for sec_proxy / message manager is regular memory, and all sec proxy does is to trigger a burst of all 60 bytes of data over to the target thread backing ring accelerator. It doesn't do a memory scrub when it moves data out in the burst. When we transmit multiple messages, remnants of previous message is also transmitted which results in some random data being set in TISCI fields of messages that have been expanded forward. The entire concept of backward compatibility hinges on the fact that the unused message fields remain 0x0 allowing for 0x0 value to be specially considered when backward compatibility of message extension is done. So, instead of just writing the completion register, we continue to fill the message buffer up with 0x0 (note: for partial message involving completion, we already do this). This allows us to scale and introduce ABI changes back also work with other boot stages that may have left data in the internal memory. While at this, be consistent and explicit with the data_reg pointer increment. Fixes: aace66b170ce ("mailbox: Introduce TI message manager driver") Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2023-06-30mailbox: tegra: add support for Tegra264Stefan Kristiansson1-2/+14
Tegra264 has a slightly different doorbell register layout than previous chips. Acked-by: Thierry Reding <[email protected]> Signed-off-by: Stefan Kristiansson <[email protected]> Signed-off-by: Peter De Schrijver <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2023-06-30dt-bindings: mailbox: tegra: Document Tegra264 HSPPeter De Schrijver1-0/+1
Add the compatible string for the HSP block found on the Tegra264 SoC. The HSP block in Tegra264 is not register compatible with the one in Tegra194 or Tegra234 hence there is no fallback compatibility string. Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Peter De Schrijver <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2023-06-30dt-bindings: mailbox: convert bcm2835-mbox bindings to YAMLStefan Wahren2-26/+40
Convert the DT binding document for bcm2835-mbox from .txt to YAML. Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2023-06-30dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatibleManikanta Mylavarapu1-0/+1
Add compatible for the Qualcomm IPQ5018 APCS block. Signed-off-by: Manikanta Mylavarapu <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2023-06-30Merge tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds24-146/+654
Pull VFIO updates from Alex Williamson: - Adjust log levels for common messages (Oleksandr Natalenko, Alex Williamson) - Support for dynamic MSI-X allocation (Reinette Chatre) - Enable and report PCIe AtomicOp Completer capabilities (Alex Williamson) - Cleanup Kconfigs for vfio bus drivers (Alex Williamson) - Add support for CDX bus based devices (Nipun Gupta) - Fix race with concurrent mdev initialization (Eric Farman) * tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio: vfio/mdev: Move the compat_class initialization to module init vfio/cdx: add support for CDX bus vfio/fsl: Create Kconfig sub-menu vfio/platform: Cleanup Kconfig vfio/pci: Cleanup Kconfig vfio/pci-core: Add capability for AtomicOp completer support vfio/pci: Also demote hiding standard cap messages vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X vfio/pci: Support dynamic MSI-X vfio/pci: Probe and store ability to support dynamic MSI-X vfio/pci: Use bitfield for struct vfio_pci_core_device flags vfio/pci: Update stale comment vfio/pci: Remove interrupt context counter vfio/pci: Use xarray for interrupt context storage vfio/pci: Move to single error path vfio/pci: Prepare for dynamic interrupt context storage vfio/pci: Remove negative check on unsigned vector vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable vfio/pci: demote hiding ecap messages to debug level
2023-06-30Merge tag 'pci-v6.5-changes' of ↵Linus Torvalds70-843/+1626
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
2023-06-30Merge tag 'pinctrl-v6.5-1' of ↵Linus Torvalds112-7366/+11602
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time New drivers: - Tegra234 support - Qualcomm IPQ5018 support - Intel Meteor Lake-S support - Qualcomm SDX75 subdriver - Qualcomm SPMI-based PM8953 support Improvements: - Fix up support for GPIO3 on the AXP209 - Push-pull drive configuration support for the AT91 PIO4 - Fix misc non-urgent bugs in the AMD driver - Misc non-urgent improved error handling - Misc janitorial and minor improvements" * tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits) pinctrl: cherryview: Drop goto label pinctrl: baytrail: invert if condition pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook pinctrl: tegra: avoid duplicate field initializers dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function pinctrl: mlxbf3: remove broken Kconfig 'select' pinctrl: spear: Remove unused of_gpio.h inclusion pinctrl: lantiq: Remove unused of_gpio.h inclusion pinctrl: at91-pio4: check return value of devm_kasprintf() pinctrl: microchip-sgpio: check return value of devm_kasprintf() pinctrl: freescale: Fix a memory out of bounds when num_configs is 1 pinctrl: intel: refine ->irq_set_type() hook pinctrl: intel: refine ->set_mux() hook pinctrl: baytrail: Use str_hi_lo() helper lib/string_choices: Add str_high_low() helper lib/string_helpers: Split out string_choices.h lib/string_helpers: Add missing header files to MAINTAINERS database pinctrl: npcm7xx: Add missing check for ioremap pinctrl:sunplus: Add check for kmalloc ...
2023-06-30Merge tag 'platform-drivers-x86-v6.5-1' of ↵Linus Torvalds70-956/+4518
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "AMD PMC and PMF drivers: - Various bugfixes - Improved debugging support Intel PMC: - Refactor to support hw with multiple PMCs - Various other improvements / new hw support Intel Speed Select Technology (ISST): - TPMI Uncore Frequency + Cluster Level Power Controls - Various bugfixes - tools/intel-speed-select: Misc improvements Dell-DDV: Add documentation INT3472 ACPI camera sensor glue code: - Evaluate device's _DSM method to control imaging clock - Drop the need to have a table with per sensor-model info Lenovo Yogabook: - Refactor / rework to also support Android models Think-LMI: - Multiple improvements and fixes WMI: - Add proper API documentation for the WMI bus x86-android-tablets: - Misc new hw support Miscellaneous other cleanups / fixes" * tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits) platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC platform/x86:intel/pmc: Discover PMC devices platform/x86:intel/pmc: Enable debugfs multiple PMC support platform/x86:intel/pmc: Add support to handle multiple PMCs platform/x86:intel/pmc: Combine core_init() and core_configure() platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms platform/x86/intel: tpmi: Remove hardcoded unit and offset platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors platform/x86: int3472: discrete: Remove sensor_config-s platform/x86: int3472: discrete: Drop GPIO remapping support platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32 platform/x86/dell/dell-rbtn: Fix resources leaking on error path platform/x86: ISST: Fix usage counter platform/x86: ISST: Reset default callback on unregister platform/x86: int3472: Switch back to use struct i2c_driver's .probe() ...
2023-06-30Merge tag 'nvme-6.5-2023-06-30' of git://git.infradead.org/nvme into block-6.5Jens Axboe6-4/+20
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.5 - Reduce spamming kernel logs on repeated controller updates (Breno) - Improved struct packing (Christophe JAILLET) - Misspelled command name in error logging (Damien) - Failover fix for temporary frozen queue (Sagi) - Reset error handling fixes (Keith)" * tag 'nvme-6.5-2023-06-30' of git://git.infradead.org/nvme: nvme: disable controller on reset state failure nvme: sync timeout work on failed reset nvme: ensure unquiesce on teardown nvme-mpath: fix I/O failure with EAGAIN when failing over I/O nvme: host: fix command name spelling nvmet: Reorder fields in 'struct nvmet_ns' nvme: Print capabilities changes just once
2023-06-30Merge tag 'for-6.5/dm-changes' of ↵Linus Torvalds18-236/+478
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Update DM crypt to allocate compound pages if possible - Fix DM crypt target's crypt_ctr_cipher_new return value on invalid AEAD cipher - Fix DM flakey testing target's write bio corruption feature to corrupt the data of a cloned bio instead of the original - Add random_read_corrupt and random_write_corrupt features to DM flakey target - Fix ABBA deadlock in DM thin metadata by resetting associated bufio client rather than destroying and recreating it - A couple other small DM thinp cleanups - Update DM core to support disabling block core IO stats accounting and optimize away code that isn't needed if stats are disabled - Other small DM core cleanups - Improve DM integrity target to not require so much memory on 32 bit systems. Also only allocate the recalculate buffer as needed (and increasingly reduce its size on allocation failure) - Update DM integrity to use %*ph for printing hexdump of a small buffer. Also update DM integrity documentation - Various DM core ioctl interface hardening. Now more careful about alignment of structures and processing of input passed to the kernel from userspace. Also disallow the creation of DM devices named "control", "." or ".." - Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM core's ioctl and bufio code * tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits) dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc dm integrity: scale down the recalculate buffer if memory allocation fails dm integrity: only allocate recalculate buffer when needed dm integrity: reduce vmalloc space footprint on 32-bit architectures dm ioctl: Refuse to create device named "." or ".." dm ioctl: Refuse to create device named "control" dm ioctl: Avoid double-fetch of version dm ioctl: structs and parameter strings must not overlap dm ioctl: Avoid pointer arithmetic overflow dm ioctl: Check dm_target_spec is sufficiently aligned Documentation: dm-integrity: Document an example of how the tunables relate. Documentation: dm-integrity: Document default values. Documentation: dm-integrity: Document the meaning of "buffer". Documentation: dm-integrity: Fix minor grammatical error. dm integrity: Use %*ph for printing hexdump of a small buffer dm thin: disable discards for thin-pool if no_discard_passdown dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h dm: skip dm-stats work in alloc_io() unless needed dm: avoid needless dm_io access if all IO accounting is disabled dm: support turning off block-core's io stats accounting ...
2023-06-30Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds177-2244/+4837
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...
2023-06-30Merge tag 'ata-6.5-rc1' of ↵Linus Torvalds48-1927/+2317
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...
2023-06-30Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of ↵Linus Torvalds324-11760/+20277
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next Pull perf tools updates from Namhyung Kim: "Internal cleanup: - Refactor PMU data management to handle hybrid systems in a generic way. Do more work in the lexer so that legacy event types parse more easily. A side-effect of this is that if a PMU is specified, scanning sysfs is avoided improving start-up time. - Fix hybrid metrics, for example, the TopdownL1 works for both performance and efficiency cores on Intel machines. To support this, sort and regroup events after parsing. - Add reference count checking for the 'thread' data structure. - Lots of fixes for memory leaks in various places thanks to the ASAN and Ian's refcount checker. - Reduce the binary size by replacing static variables with local or dynamically allocated memory. - Introduce shared_mutex for annotate data to reduce memory footprint. - Make filesystem access library functions more thread safe. Test: - Organize cpu_map tests into a single suite. - Add metric value validation test to check if the values are within correct value ranges. - Add perf stat stdio output test to check if event and metric names match. - Add perf data converter JSON output test. - Fix a lot of issues reported by shellcheck(1). This is a preparation to enable shellcheck by default. - Make the large x86 new instructions test optional at build time using EXTRA_TESTS=1. - Add a test for libpfm4 events. perf script: - Add 'dsoff' outpuf field to display offset from the DSO. $ perf script -F comm,pid,event,ip,dsoff ls 2695501 cycles: 152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5) ls 2695501 cycles: ffffffff99045b3e ([kernel.kallsyms]) ls 2695501 cycles: ffffffff9968e107 ([kernel.kallsyms]) ls 2695501 cycles: ffffffffc1f54afb ([kernel.kallsyms]) ls 2695501 cycles: ffffffff9968382f ([kernel.kallsyms]) ls 2695501 cycles: ffffffff99e00094 ([kernel.kallsyms]) ls 2695501 cycles: 152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0) ls 2695501 cycles: ffffffff992a6db0 ([kernel.kallsyms]) - Adjust width for large PID/TID values. perf report: - Robustify reading addr2line output for srcline by checking sentinel output before the actual data and by using timeout of 1 second. - Allow config terms (like 'name=ABC') with breakpoint events. $ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1 perf annotate: - Handle x86 instruction suffix like 'l' in 'movl' generally. - Parse instruction operands properly even with a whitespace. This is needed for llvm-objdump output. - Support RISC-V binutils lookup using the triplet prefixes. - Add '<' and '>' key to navigate to prev/next symbols in TUI. - Fix instruction association and parsing for LoongArch. perf stat: - Add --per-cache aggregation option, optionally specify a cache level like `--per-cache=L2`. $ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\ taskset -c 0-15,64-79,128-143,192-207\ perf bench sched messaging -p -t -l 100000 -g 8 # Running 'sched/messaging' benchmark: # 20 sender and receiver threads per group # 8 groups == 320 threads run Total time: 7.648 [sec] Performance counter stats for 'system wide': S0-D0-L3-ID0 16 17,145,912 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID8 16 14,977,628 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID16 16 262,539 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID24 16 3,140 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID32 16 27,403 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID40 16 17,026 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID48 16 7,292 ls_dmnd_fills_from_sys.ext_cache_remote S0-D0-L3-ID56 16 2,464 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID64 16 22,489,306 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID72 16 21,455,257 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID80 16 11,619 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID88 16 30,978 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID96 16 37,628 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID104 16 13,594 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID112 16 10,164 ls_dmnd_fills_from_sys.ext_cache_remote S1-D1-L3-ID120 16 11,259 ls_dmnd_fills_from_sys.ext_cache_remote 7.779171484 seconds time elapsed - Change default (no event/metric) formatting for default metrics so that events are hidden and the metric and group appear. Performance counter stats for 'ls /': 1.85 msec task-clock # 0.594 CPUs utilized 0 context-switches # 0.000 /sec 0 cpu-migrations # 0.000 /sec 97 page-faults # 52.517 K/sec 2,187,173 cycles # 1.184 GHz 2,474,459 instructions # 1.13 insn per cycle 531,584 branches # 287.805 M/sec 13,626 branch-misses # 2.56% of all branches TopdownL1 # 23.5 % tma_backend_bound # 11.5 % tma_bad_speculation # 39.1 % tma_frontend_bound # 25.9 % tma_retiring - Allow --cputype option to have any PMU name (not just hybrid). - Fix output value not to added when it runs multiple times with -r option. perf list: - Show metricgroup description from JSON file called metricgroups.json. - Allow 'pfm' argument to list only libpfm4 events and check each event is supported before showing it. JSON vendor events: - Avoid event grouping using "NO_GROUP_EVENTS" constraints. The topdown events are correctly grouped even if no group exists. - Add "Default" metric group to print it in the default output. And use "DefaultMetricgroupName" to indicate the real metric group name. - Add AmpereOne core PMU events. Misc: - Define man page date correctly. - Track exception level properly on ARM CoreSight ETM. - Allow anonymous struct, union or enum when retrieving type names from DWARF. - Fix incorrect filename when calling `perf inject --jit`. - Handle PLT size correctly on LoongArch" * tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits) perf test: Skip metrics w/o event name in stat STD output linter perf test: Reorder event name checks in stat STD output linter perf pmu: Remove a hard coded cpu PMU assumption perf pmus: Add notion of default PMU for JSON events perf unwind: Fix map reference counts perf test: Set PERF_EXEC_PATH for script execution perf script: Initialize buffer for regs_map() perf tests: Fix test_arm_callgraph_fp variable expansion perf symbol: Add LoongArch case in get_plt_sizes() perf test: Remove x permission from lib/stat_output.sh perf test: Rerun failed metrics with longer workload perf test: Add skip list for metrics known would fail perf test: Add metric value validation test perf jit: Fix incorrect file name in DWARF line table perf annotate: Fix instruction association and parsing for LoongArch perf annotation: Switch lock from a mutex to a sharded_mutex perf sharded_mutex: Introduce sharded_mutex tools: Fix incorrect calculation of object size by sizeof perf subcmd: Fix missing check for return value of malloc() in add_cmdname() perf parse-events: Remove unneeded semicolon ...
2023-06-30nvme: disable controller on reset state failureKeith Busch1-1/+2
If the controller is not in a RESETTING state at the point of reset work, we have to conclude the controller is being deleted. Go to the cleanup on this condition to ensure proper pairing of request_queue quiesce state. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2023-06-30nvme: sync timeout work on failed resetKeith Busch1-0/+1
Timeouts during reset will set the controller for failure, preventing the state change to LIVE. Ensure all timeout work is synced after the controller disabling completes to ensure we don't have any other tasks messing with any namespace request_queue's. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2023-06-30nvme: ensure unquiesce on teardownKeith Busch1-0/+1
The reset work is called on quiesced IO queues, so ensure these are unquiesced after a failed reset to flush out any pending requests. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2023-06-30Merge tag 'probes-v6.5' of ↵Linus Torvalds31-164/+2476
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes updates from Masami Hiramatsu: - fprobe: Pass return address to the fprobe entry/exit callbacks so that the callbacks don't need to analyze pt_regs/stack to find the function return address. - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN flags so that those are not set at once. - fprobe events: - Add a new fprobe events for tracing arbitrary function entry and exit as a trace event. - Add a new tracepoint events for tracing raw tracepoint as a trace event. This allows user to trace non user-exposed tracepoints. - Move eprobe's event parser code into probe event common file. - Introduce BTF (BPF type format) support to kernel probe (kprobe, fprobe and tracepoint probe) events so that user can specify traced function arguments by name. This also applies the type of argument when fetching the argument. - Introduce '$arg*' wildcard support if BTF is available. This expands the '$arg*' meta argument to all function argument automatically. - Check the return value types by BTF. If the function returns 'void', '$retval' is rejected. - Add some selftest script for fprobe events, tracepoint events and BTF support. - Update documentation about the fprobe events. - Some fixes for above features, document and selftests. - selftests for ftrace (in addition to the new fprobe events): - Add a test case for multiple consecutive probes in a function which checks if ftrace based kprobe, optimized kprobe and normal kprobe can be defined in the same target function. - Add a test case for optimized probe, which checks whether kprobe can be optimized or not. * tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/probes: Fix tracepoint event with $arg* to fetch correct argument Documentation: Fix typo of reference file name tracing/probes: Fix to return NULL and keep using current argc selftests/ftrace: Add new test case which checks for optimized probes selftests/ftrace: Add new test case which adds multiple consecutive probes in a function Documentation: tracing/probes: Add fprobe event tracing document selftests/ftrace: Add BTF arguments test cases selftests/ftrace: Add tracepoint probe test case tracing/probes: Add BTF retval type support tracing/probes: Add $arg* meta argument for all function args tracing/probes: Support function parameters if BTF is available tracing/probes: Move event parameter fetching code to common parser tracing/probes: Add tracepoint support on fprobe_events selftests/ftrace: Add fprobe related testcases tracing/probes: Add fprobe events for tracing function entry and exit. tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN fprobe: Pass return address to the handlers
2023-06-30dt-bindings: timestamp: restrict node name suffixesKrzysztof Kozlowski1-1/+1
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to -N suffixes to decimal numbers. Suggested-by: Rob Herring <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Tony Lindgren <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-06-30dt-bindings: slimbus: restrict node name suffixesKrzysztof Kozlowski1-1/+1
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to: 1. Only one unit address or one -N suffix, 2. -N suffixes to decimal numbers. Suggested-by: Rob Herring <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Tony Lindgren <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-06-30dt-bindings: watchdog: restrict node name suffixesKrzysztof Kozlowski1-2/+2
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to -N suffixes to decimal numbers. Suggested-by: Rob Herring <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Rob Herring <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Tony Lindgren <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-06-30Merge tag 'trace-v6.5' of ↵Linus Torvalds29-62/+1079
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add new feature to have function graph tracer record the return value. Adds a new option: funcgraph-retval ; when set, will show the return value of a function in the function graph tracer. - Also add the option: funcgraph-retval-hex where if it is not set, and the return value is an error code, then it will return the decimal of the error code, otherwise it still reports the hex value. - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd That when a application opens it, it becomes the task that the timer lat tracer traces. The application can also read this file to find out how it's being interrupted. - Add the file /sys/kernel/tracing/available_filter_functions_addrs that works just the same as available_filter_functions but also shows the addresses of the functions like kallsyms, except that it gives the address of where the fentry/mcount jump/nop is. This is used by BPF to make it easier to attach BPF programs to ftrace hooks. - Replace strlcpy with strscpy in the tracing boot code. * tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix warnings when building htmldocs for function graph retval riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing/boot: Replace strlcpy with strscpy tracing/timerlat: Add user-space interface tracing/osnoise: Skip running osnoise if all instances are off tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable ftrace: Show all functions with addresses in available_filter_functions_addrs selftests/ftrace: Add funcgraph-retval test case LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex function_graph: Support recording and printing the return value of function fgraph: Add declaration of "struct fgraph_ret_regs"
2023-06-30dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yamlNikita Bondarenko2-15/+41
Converted txt file to yaml. No additional changes. Signed-off-by: Nikita Bondarenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2023-06-30drm/amdgpu: Fix potential fence use-after-free v2shanzhulig1-3/+3
fence Decrements the reference count before exiting. Avoid Race Vulnerabilities for fence use-after-free. v2 (chk): actually fix the use after free and not just move it. Signed-off-by: shanzhulig <[email protected]> Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/pm: avoid unintentional shutdown due to temperature momentary ↵Evan Quan8-32/+102
fluctuation An intentional delay is added on soft ctf triggered. Then there will be a double check for the GPU temperature before taking further action. This can avoid unintended shutdown due to temperature momentary fluctuation. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/pm: expose swctf threshold setting for legacy powerplayEvan Quan7-1/+26
Preparation for coming optimization which eliminates the influence of GPU temperature momentary fluctuation. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: 3.2.241Aric Cyr1-1/+1
This version brings along the following: - Improve debugging mechanism for Gaming FAMS - Add monitor specific edid quirks - Fixes for Phantom pipe - Fixes for Shapper LUT - Clean up asserts Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Take full update path if number of planes changedAlvin Lee1-5/+14
[Description] - A full update is required if the number of planes for a given stream changes - The new fast update path only checked for stream and plane updates, but there could be a plane addition or removal without one of the stream and plane updates triggering a full update - Add an explicit check for number of planes changing for a full update Reviewed-by: Samson Tam <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Create debugging mechanism for Gaming FAMSGianna Binder3-4/+3
[WHY] To enable FAMS even during gaming sessions. [HOW] By leveraging a new dc.debug parameter. Reviewed-by: Felipe Clark <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Gianna Binder <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Add monitor specific edid quirkAurabindo Pillai1-0/+26
Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this monitor does not work well under some use cases, and is likely implementation specific bug on the monitor's firmware. Cc: [email protected] Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: For new fast update path, loop through each surfaceAlvin Lee1-34/+52
[Description] - Previous implementation didn't consider multiple surfaces in a flip - Loop through each surface in each flip to ensure the update path is correct Reviewed-by: Samson Tam <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2Austin Zheng1-4/+0
[Why] K1 and K2 not being setting properly when subVP is active. [How] Have phantom pipes use the same programing as the main pipes without checking the paired stream Cc: [email protected] Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Austin Zheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Limit new fast update path to addr and gamma / colorAlvin Lee2-2/+102
[Description] - We want to limit the new fast update path to address and gamma updates only. - Add a check in dc_update_planes_and_stream to only take the new fast update path if we only have the specific fast updates defined. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: Fix the delta clamping for shaper LUTHarry Wentland7-13/+25
The shaper LUT requires a 10-bit value of the delta between segments. We were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we want it to do. It will preserve 10-bit precision after the decimal point, but that's not quite what we want. We want 14-bit precision and discard the 4 most-significant bytes. To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: Keep non-psp path for partition switchLijo Lazar1-6/+22
When PSP block is not present, use direct programming. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Acked-by: Mangesh Gadre <[email protected]> Tested-by: Mangesh Gadre <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/display: program DPP shaper and 3D LUT if updatedMelissa Wen1-2/+3
If shaper and 3D LUT data updates, lut_3d bit in update_flag is updated and we need to call set_input_transfer_func to program DPP shaper and 3D LUTs. Small cleanup of code style in the related if-condition. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Melissa Wen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30Revert "drm/amd/display: edp do not add non-edid timings"Hersen Wu1-7/+1
This change causes regression when eDP and external display in mirror mode. When external display supports low resolution than eDP, use eDP timing to driver external display may cause corruption on external display. This reverts commit e749dd10e5f292061ad63d2b030194bf7d7d452c. Cc: [email protected] Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2655 Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: share drm device for pci amdgpu device with 1st partition deviceJames Zhu1-3/+6
To save render node resoure, share drm device setting for pci amdgpu device with 1st XCP partition device. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/pm: Add GFX v9.4.3 unique id to sysfsLijo Lazar1-0/+1
Expose unique id of GFX v9.4.3 ASICs as device attribute. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd/pm: Enable pp_feature attributeLijo Lazar1-1/+3
on APUs with GFX v9.4.3 Signed-off-by: Lijo Lazar <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu/vcn: Need to unpause dpg before stop dpgEmily Deng1-0/+2
Need to unpause dpg first, or it will hit follow error during stop dpg: "[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000000n" Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: remove duplicated doorbell range init for sdma v4.4.2Le Ma1-5/+0
Handled in earlier phase Signed-off-by: Le Ma <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: gpu recovers from fatal error in poison modeYiPeng Chai2-0/+12
Fatal error occurs in ras poison mode, mode1 reset is used to recover gpu. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: enable mcbp by default on gfx9Alex Deucher2-3/+8
It's required for high priority queues. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535 Reviewed-and-tested-by: Jiadong Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amdgpu: make mcbp a per device settingAlex Deucher7-13/+22
So we can selectively enable it on certain devices. No intended functional change. Reviewed-and-tested-by: Jiadong Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-06-30drm/amd: Don't initialize PSP twice for Navi3xMario Limonciello1-5/+0
PSP functions are already set by psp_early_init() so initializing them a second time is unnecessary. No intended functional changes. Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.