| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We're going to add a new variant of the dumb BO allocation function, so
let's rename vc4_dumb_create() to something a bit more specific.
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
A new generation of controller has been introduced with the
BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over
time we've piled on a number of checks in most parts of the drivers.
All these checks are performed several times, and are not always
consistent. Let's create a single, global, variable to hold it and use
it everywhere.
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The vc4 planes are setup in hardware by creating a hardware descriptor
in a dedicated RAM. As part of the process to setup a plane in KMS, we
thus need to allocate some part of that dedicated RAM to store our
descriptor there.
The async update path will just reuse the descriptor already allocated
for that plane and will modify it directly in RAM to match whatever has
been asked for.
In order to do that, it will compare the descriptor for the old plane
state and the new plane state, will make sure they fit in the same size,
and check that only the position or buffer address have changed.
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.
Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <[email protected]>
Reported-and-tested-by: Alexandru Elisei <[email protected]>
Reported-and-tested-by: Guenter Roeck <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
|
|
error
We got issue as follows:
[home]# mount /dev/sdd test
[home]# cd test
[test]# ls
dir1 lost+found
[test]# rmdir dir1
ext2_empty_dir: inject fault
[test]# ls
lost+found
[test]# cd ..
[home]# umount test
[home]# fsck.ext2 -fn /dev/sdd
e2fsck 1.42.9 (28-Dec-2013)
Pass 1: Checking inodes, blocks, and sizes
Inode 4065, i_size is 0, should be 1024. Fix? no
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Unconnected directory inode 4065 (/???)
Connect to /lost+found? no
'..' in ... (4065) is / (2), should be <The NULL inode> (0).
Fix? no
Pass 4: Checking reference counts
Inode 2 ref count is 3, should be 4. Fix? no
Inode 4065 ref count is 2, should be 3. Fix? no
Pass 5: Checking group summary information
/dev/sdd: ********** WARNING: Filesystem still has errors **********
/dev/sdd: 14/128016 files (0.0% non-contiguous), 18477/512000 blocks
Reason is same with commit 7aab5c84a0f6. We can't assume directory
is empty when read directory entry failed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ye Bin <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
|
|
If the component driver fails to bind, or is unbound, the driver data
for the top-level platform device points to a freed drm_device. If the
system is then suspended, the driver passes this dangling pointer to
drm_mode_config_helper_suspend(), which crashes.
Fix this by only setting the driver data while the platform driver holds
a reference to the drm_device.
Fixes: 624b4b48d9d8 ("drm: sun4i: Add support for suspending the display driver")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
commit 6de79dd3a920 ("drm/bridge: display-connector: add ddc-en gpio
support") added a consumer for this GPIO in the HDMI connector device.
This new consumer conflicts with the pre-existing GPIO consumer in the
sun8i HDMI controller driver, which prevents the driver from probing:
[ 4.983358] display-connector connector: GPIO lookup for consumer ddc-en
[ 4.983364] display-connector connector: using device tree for GPIO lookup
[ 4.983392] gpio-226 (ddc-en): gpiod_request: status -16
[ 4.983399] sun8i-dw-hdmi 6000000.hdmi: Couldn't get ddc-en gpio
[ 4.983618] sun4i-drm display-engine: failed to bind 6000000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi]): -16
[ 4.984082] sun4i-drm display-engine: Couldn't bind all pipelines components
[ 4.984171] sun4i-drm display-engine: adev bind failed: -16
[ 4.984179] sun8i-dw-hdmi: probe of 6000000.hdmi failed with error -16
Both drivers have the same behavior: they leave the GPIO active for the
life of the device. Let's take advantage of the new implementation, and
drop the now-obsolete code from the HDMI controller driver.
Fixes: 6de79dd3a920 ("drm/bridge: display-connector: add ddc-en gpio support")
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It is vitally important that we preserve the state of the NREXT64 inode
flag when we're changing the other flags2 fields.
Fixes: 9b7d16e34bbe ("xfs: Introduce XFS_DIFLAG2_NREXT64 and associated helpers")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
|
|
The variable @args is fed to a tracepoint, and that's the only place
it's used. This is fine for the kernel, but for userspace, tracepoints
are #define'd out of existence, which results in this warning on gcc
11.2:
xfs_attr.c: In function ‘xfs_attr_node_try_addname’:
xfs_attr.c:1440:42: warning: unused variable ‘args’ [-Wunused-variable]
1440 | struct xfs_da_args *args = attr->xattri_da_args;
| ^~~~
Clean this up.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Dave Chinner <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
|
|
I found a race involving the larp control knob, aka the debugging knob
that lets developers enable logging of extended attribute updates:
Thread 1 Thread 2
echo 0 > /sys/fs/xfs/debug/larp
setxattr(REPLACE)
xfs_has_larp (returns false)
xfs_attr_set
echo 1 > /sys/fs/xfs/debug/larp
xfs_attr_defer_replace
xfs_attr_init_replace_state
xfs_has_larp (returns true)
xfs_attr_init_remove_state
<oops, wrong DAS state!>
This isn't a particularly severe problem right now because xattr logging
is only enabled when CONFIG_XFS_DEBUG=y, and developers *should* know
what they're doing.
However, the eventual intent is that callers should be able to ask for
the assistance of the log in persisting xattr updates. This capability
might not be required for /all/ callers, which means that dynamic
control must work correctly. Once an xattr update has decided whether
or not to use logged xattrs, it needs to stay in that mode until the end
of the operation regardless of what subsequent parallel operations might
do.
Therefore, it is an error to continue sampling xfs_globals.larp once
xfs_attr_change has made a decision about larp, and it was not correct
for me to have told Allison that ->create_intent functions can sample
the global log incompat feature bitfield to decide to elide a log item.
Instead, create a new op flag for the xfs_da_args structure, and convert
all other callers of xfs_has_larp and xfs_sb_version_haslogxattrs within
the attr update state machine to look for the operations flag.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Allison Henderson <[email protected]>
|
|
`selinux_add_opt()` stopped taking ownership of the passed context since
commit 70f4169ab421 ("selinux: parse contexts for mount options early").
unreferenced object 0xffff888114dfd140 (size 64):
comm "mount", pid 15182, jiffies 4295687028 (age 796.340s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffffa07dbef4>] kmemdup_nul+0x24/0x80
[<ffffffffa0d34253>] selinux_sb_eat_lsm_opts+0x293/0x560
[<ffffffffa0d13f08>] security_sb_eat_lsm_opts+0x58/0x80
[<ffffffffa0af1eb2>] generic_parse_monolithic+0x82/0x180
[<ffffffffa0a9c1a5>] do_new_mount+0x1f5/0x550
[<ffffffffa0a9eccb>] path_mount+0x2ab/0x1570
[<ffffffffa0aa019e>] __x64_sys_mount+0x20e/0x280
[<ffffffffa1f47124>] do_syscall_64+0x34/0x80
[<ffffffffa200007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
unreferenced object 0xffff888108e71640 (size 64):
comm "fsmount", pid 7607, jiffies 4295044974 (age 1601.016s)
hex dump (first 32 bytes):
73 79 73 74 65 6d 5f 75 3a 6f 62 6a 65 63 74 5f system_u:object_
72 3a 74 65 73 74 5f 66 69 6c 65 73 79 73 74 65 r:test_filesyste
backtrace:
[<ffffffff861dc2b1>] memdup_user+0x21/0x90
[<ffffffff861dc367>] strndup_user+0x47/0xa0
[<ffffffff864f6965>] __do_sys_fsconfig+0x485/0x9f0
[<ffffffff87940124>] do_syscall_64+0x34/0x80
[<ffffffff87a0007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Cc: [email protected]
Fixes: 70f4169ab421 ("selinux: parse contexts for mount options early")
Signed-off-by: Christian Göttsche <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
Reset the type of the record last as the helper `audit_free_module()`
depends on it.
unreferenced object 0xffff888153b707f0 (size 16):
comm "modprobe", pid 1319, jiffies 4295110033 (age 1083.016s)
hex dump (first 16 bytes):
62 69 6e 66 6d 74 5f 6d 69 73 63 00 6b 6b 6b a5 binfmt_misc.kkk.
backtrace:
[<ffffffffa07dbf9b>] kstrdup+0x2b/0x50
[<ffffffffa04b0a9d>] __audit_log_kern_module+0x4d/0xf0
[<ffffffffa03b6664>] load_module+0x9d4/0x2e10
[<ffffffffa03b8f44>] __do_sys_finit_module+0x114/0x1b0
[<ffffffffa1f47124>] do_syscall_64+0x34/0x80
[<ffffffffa200007e>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
Cc: [email protected]
Fixes: 12c5e81d3fd0 ("audit: prepare audit_context for use in calling contexts beyond syscalls")
Signed-off-by: Christian Göttsche <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Correctly handle vm_map areas in hardened usercopy (Matthew Wilcox)
- Adjust CFI RCU usage to avoid boot splats with cpuidle (Sami Tolvanen)
* tag 'hardening-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Make usercopy resilient against ridiculously large copies
usercopy: Cast pointer to an integer once
usercopy: Handle vm_map_ram() areas
cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle
|
|
Keep the warn, but drop the early return. If we do manage to hit this
sort of issue, skipping the cleanup just makes things worse (dangling
drm_mm_nodes when the msm_gem_vma is freed, etc). Whereas the worst
that happens if we tear down a mapping the GPU is accessing is that we
get GPU iova faults, but otherwise the world keeps spinning.
Signed-off-by: Rob Clark <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]>
Reported-by: Steev Klimaszewski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/489115/
Link: https://lore.kernel.org/r/[email protected]
|
|
Previously the BO_PINNED state in the submit was tracking two related
but different things: (1) that the buffer object was pinned, and (2)
that the vma (mapping within a set of pagetables) was pinned. But with
fenced vma unpin (needed so that userspace couldn't race with retire
path for releasing a vma) these two were decoupled. The fact that the
BO_PINNED flag was already cleared meant that we leaked the bo pin count
which should have been dropped when the submit was retired.
So split this state into BO_OBJ_PINNED and BO_VMA_PINNED, so they can be
dropped independently.
Fixes: 95d1deb02a9c ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/487559/
Link: https://lore.kernel.org/r/[email protected]
|
|
There are reports that the console kthreads block the global console
lock when the system is going down, for example, reboot, panic.
First part of the solution was to block kthreads in these problematic
system states so they stopped handling newly added messages.
Second part of the solution is to wait when for the kthreads when
they are actively printing. It solves the problem when a message
was printed before the system entered the problematic state and
the kthreads managed to step in.
A busy waiting has to be used because panic() can be called in any
context and in an unknown state of the scheduler.
There must be a timeout because the kthread might get stuck or sleeping
and never release the lock. The timeout 10s is an arbitrary value
inspired by the softlockup timeout.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Signed-off-by: Petr Mladek <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There are known situations when the console kthreads are not
reliable or does not work in principle, for example, early boot,
panic, shutdown.
For these situations there is the direct (legacy) mode when printk() tries
to get console_lock() and flush the messages directly. It works very well
during the early boot when the console kthreads are not available at all.
It gets more complicated in the other situations when console kthreads
might be actively printing and block console_trylock() in printk().
The same problem is in the legacy code as well. Any console_lock()
owner could block console_trylock() in printk(). It is solved by
a trick that the current console_lock() owner is responsible for
printing all pending messages. It is actually the reason why there
is the risk of softlockups and why the console kthreads were
introduced.
The console kthreads use the same approach. They are responsible
for printing the messages by definition. So that they handle
the messages anytime when they are awake and see new ones.
The global console_lock is available when there is nothing
to do.
It should work well when the problematic context is correctly
detected and printk() switches to the direct mode. But it seems
that it is not enough in practice. There are reports that
the messages are not printed during panic() or shutdown()
even though printk() tries to use the direct mode here.
The problem seems to be that console kthreads become active in these
situation as well. They steel the job before other CPUs are stopped.
Then they are stopped in the middle of the job and block the global
console_lock.
First part of the solution is to block console kthreads when
the system is in a problematic state and requires the direct
printk() mode.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Suggested-by: John Ogness <[email protected]>
Tested-by: Paul E. McKenney <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two fixes for this merge window"
* tag 'tpmdd-next-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: fix and refactor CONFIG_SYSTEM_BLACKLIST_HASH_LIST build
certs/blacklist_hashes.c: fix const confusion in certs blacklist
|
|
Commit a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag")
added the FMODE_CAN_ODIRECT flag for NFSv3 but neglected to add
it for NFSv4.x. This causes direct io on NFSv4.x to fail open
with EINVAL:
mount -o vers=4.2 127.0.0.1:/export /mnt/nfs4
dd if=/dev/zero of=/mnt/nfs4/file.bin bs=128k count=1 oflag=direct
dd: failed to open '/mnt/nfs4/file.bin': Invalid argument
dd of=/dev/null if=/mnt/nfs4/file.bin bs=128k count=1 iflag=direct
dd: failed to open '/mnt/dir1/file1.bin': Invalid argument
Fixes: a2ad63daa88b ("VFS: add FMODE_CAN_ODIRECT file flag")
Signed-off-by: Dave Wysochanski <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Commit addf466389d9 ("certs: Check that builtin blacklist hashes are
valid") was applied 8 months after the submission.
In the meantime, the base code had been removed by commit b8c96a6b466c
("certs: simplify $(srctree)/ handling and remove config_filename
macro").
Fix the Makefile.
Create a local copy of $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST). It is
included from certs/blacklist_hashes.c and also works as a timestamp.
Send error messages from check-blacklist-hashes.awk to stderr instead
of stdout.
Fixes: addf466389d9 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Mickaël Salaün <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
This file fails to compile as follows:
CC certs/blacklist_hashes.o
certs/blacklist_hashes.c:4:1: error: ignoring attribute ‘section (".init.data")’ because it conflicts with previous ‘section (".init.rodata")’ [-Werror=attributes]
4 | const char __initdata *const blacklist_hashes[] = {
| ^~~~~
In file included from certs/blacklist_hashes.c:2:
certs/blacklist.h:5:38: note: previous declaration here
5 | extern const char __initconst *const blacklist_hashes[];
| ^~~~~~~~~~~~~~~~
Apply the same fix as commit 2be04df5668d ("certs/blacklist_nohashes.c:
fix const confusion in certs blacklist").
Fixes: 734114f8782f ("KEYS: Add a system blacklist keyring")
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Mickaël Salaün <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Hyper-V Isolation VM current code uses sev_es_ghcb_hv_call()
to read/write MSR via GHCB page and depends on the sev code.
This may cause regression when sev code changes interface
design.
The latest SEV-ES code requires to negotiate GHCB version before
reading/writing MSR via GHCB page and sev_es_ghcb_hv_call() doesn't
work for Hyper-V Isolation VM. Add Hyper-V ghcb related implementation
to decouple SEV and Hyper-V code. Negotiate GHCB version in the
hyperv_init() and use the version to communicate with Hyper-V
in the ghcb hv call function.
Fixes: 2ea29c5abbc2 ("x86/sev: Save the negotiated GHCB version")
Signed-off-by: Tianyu Lan <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
|
|
After successful #VE handling, tdx_handle_virt_exception() has to move
RIP to the next instruction. The handler needs to know the length of the
instruction.
If the #VE happened due to instruction execution, the GET_VEINFO TDX
module call provides info on the instruction in R10, including its length.
For #VE due to EPT violation, the info in R10 is not populand and the
kernel must decode the instruction manually to find out its length.
Restructure the code to make it explicit that the instruction length
depends on the type of #VE. Make individual #VE handlers return
the instruction length on success or -errno on failure.
[ dhansen: fix up changelog and comments ]
Suggested-by: Dave Hansen <[email protected]>
Signed-off-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.19
Pull MD fixes from Song.
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid5-ppl: Fix argument order in bio_alloc_bioset()
Revert "md: don't unregister sync_thread with reconfig_mutex held"
|
|
tdx_early_handle_ve() does not increment RIP after successfully
handling the exception. That leads to infinite loop of exceptions.
Move RIP when exceptions are successfully handled.
[ dhansen: make problem statement more clear ]
Fixes: 32e72854fa5f ("x86/tdx: Port I/O: Add early boot support")
Signed-off-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:
drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
(different base types)
drivers/md/raid5-ppl.c:632:57: expected unsigned int opf
drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype]
drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
(different base types)
drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype]
gfp_mask
drivers/md/raid5-ppl.c:633:61: got unsigned long long
The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.
Fixes: 609be1066731 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: [email protected] # 5.18+
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
|
|
On processing a module BTF of module built for an older kernel, we might
sometimes find that some type points to itself forming a loop. If such a
type is a modifier, btf_check_type_tags's while loop following modifier
chain will be caught in an infinite loop.
Fix this by defining a maximum chain length and bailing out if we spin
any longer than that.
Fixes: eb596b090558 ("bpf: Ensure type tags precede modifiers in BTF")
Reported-by: Daniel Borkmann <[email protected]>
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc51a ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
|
|
MediaTek IP requires that after dma stop, it need to wait this dma stop
bit auto-reset to 0. When bus is in high loading state, it will take a
while for the dma stop complete. If there is no waiting operation here,
when program runs to clear fifo and reset, bus will hang.
In addition, there should be no return in msdc_data_xfer_next() if
there is data need be transferred, because no matter what error occurs
here, it should continue to excute to the following mmc_request_done.
Otherwise the core layer may wait complete forever.
Signed-off-by: Mengqi Zhang <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull vfs idmapping fix from Christian Brauner:
"This fixes an issue where we fail to change the group of a file when
the caller owns the file and is a member of the group to change to.
This is only relevant on idmapped mounts.
There's a detailed description in the commit message and regression
tests have been added to xfstests"
* tag 'fs.fixes.v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs: account for group membership
|
|
After commit 82f6cdcc3676c ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.
Fixes: 82f6cdcc3676c ("dm: switch dm_io booleans over to proper flags")
Cc: [email protected]
Signed-off-by: Benjamin Marzinski <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- quirks, quirks, quirks to work around buggy consumer grade devices
(Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
- better kernel messages for devices that need quirking (Keith Bush)
- make a kernel message more useful (Thomas Weißschuh)"
* tag 'nvme-5.19-2022-06-15' of git://git.infradead.org/nvme:
nvme-pci: disable write zeros support on UMIC and Samsung SSDs
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
nvme-pci: sk hynix p31 has bogus namespace ids
nvme-pci: smi has bogus namespace ids
nvme-pci: phison e12 has bogus namespace ids
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
nvme-pci: add trouble shooting steps for timeouts
nvme: add bug report info for global duplicate id
nvme: add device name to warning in uuid_show()
|
|
Since commit:
c4a0ebf87cebbfa2 ("arm64/ftrace: Make function graph use ftrace directly")
The 'ftrace_common_return' label has been unused.
Remove it.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Chengming Zhou <[email protected]>
Cc: Will Deacon <[email protected]>
Tested-by: "Ivan T. Ivanov" <[email protected]>
Reviewed-by: Chengming Zhou <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Sometimes it is necessary to use a PLT entry to call an ftrace
trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(),
with each having *almost* identical logic, but this is not handled by
ftrace_modify_call() since its introduction in commit:
3b23e4991fb66f6d ("arm64: implement ftrace with regs")
Due to this, if we ever were to call ftrace_modify_call() for a callsite
which requires a PLT entry for a trampoline, then either:
a) If the old addr requires a trampoline, ftrace_modify_call() will use
an out-of-range address to generate the 'old' branch instruction.
This will result in warnings from aarch64_insn_gen_branch_imm() and
ftrace_modify_code(), and no instructions will be modified. As
ftrace_modify_call() will return an error, this will result in
subsequent internal ftrace errors.
b) If the old addr does not require a trampoline, but the new addr does,
ftrace_modify_call() will use an out-of-range address to generate the
'new' branch instruction. This will result in warnings from
aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace
the 'old' branch with a BRK. This will result in a kernel panic when
this BRK is later executed.
Practically speaking, case (a) is vastly more likely than case (b), and
typically this will result in internal ftrace errors that don't
necessarily affect the rest of the system. This can be demonstrated with
an out-of-tree test module which triggers ftrace_modify_call(), e.g.
| # insmod test_ftrace.ko
| test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024
| branch_imm_common: offset out of range
| branch_imm_common: offset out of range
| ------------[ ftrace bug ]------------
| ftrace failed to modify
| [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace]
| actual: 1d:00:00:94
| Updating ftrace call site to call a different ftrace function
| ftrace record flags: e0000002
| (2) R
| expected tramp: ffffb374ae42ed54
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0
| Modules linked in: test_ftrace(+)
| CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : ftrace_bug+0x280/0x2b0
| lr : ftrace_bug+0x280/0x2b0
| sp : ffff80000839ba00
| x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0
| x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000
| x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8
| x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff
| x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4
| x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666
| x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8
| x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167
| x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022
| Call trace:
| ftrace_bug+0x280/0x2b0
| ftrace_replace_code+0x98/0xa0
| ftrace_modify_all_code+0xe0/0x144
| arch_ftrace_update_code+0x14/0x20
| ftrace_startup+0xf8/0x1b0
| register_ftrace_function+0x38/0x90
| test_ftrace_init+0xd0/0x1000 [test_ftrace]
| do_one_initcall+0x50/0x2b0
| do_init_module+0x50/0x1f0
| load_module+0x17c8/0x1d64
| __do_sys_finit_module+0xa8/0x100
| __arm64_sys_finit_module+0x2c/0x3c
| invoke_syscall+0x50/0x120
| el0_svc_common.constprop.0+0xdc/0x100
| do_el0_svc+0x3c/0xd0
| el0_svc+0x34/0xb0
| el0t_64_sync_handler+0xbc/0x140
| el0t_64_sync+0x18c/0x190
| ---[ end trace 0000000000000000 ]---
We can solve this by consistently determining whether to use a PLT entry
for an address.
Note that since (the earlier) commit:
f1a54ae9af0da4d7 ("arm64: module/ftrace: intialize PLT at load time")
... we can consistently determine the PLT address that a given callsite
will use, and therefore ftrace_make_nop() does not need to skip
validation when a PLT is in use.
This patch factors the existing logic out of ftrace_make_call() and
ftrace_make_nop() into a common ftrace_find_callable_addr() helper
function, which is used by ftrace_make_call(), ftrace_make_nop(), and
ftrace_modify_call(). In ftrace_make_nop() the patching is consistently
validated by ftrace_modify_code() as we can always determine what the
old instruction should have been.
Fixes: 3b23e4991fb6 ("arm64: implement ftrace with regs")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Will Deacon <[email protected]>
Tested-by: "Ivan T. Ivanov" <[email protected]>
Reviewed-by: Chengming Zhou <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The branch range checks in ftrace_make_call() and ftrace_make_nop() are
incorrect, erroneously permitting a forwards branch of 128M and
erroneously rejecting a backwards branch of 128M.
This is because both functions calculate the offset backwards,
calculating the offset *from* the target *to* the branch, rather than
the other way around as the later comparisons expect.
If an out-of-range branch were erroeously permitted, this would later be
rejected by aarch64_insn_gen_branch_imm() as branch_imm_common() checks
the bounds correctly, resulting in warnings and the placement of a BRK
instruction. Note that this can only happen for a forwards branch of
exactly 128M, and so the caller would need to be exactly 128M bytes
below the relevant ftrace trampoline.
If an in-range branch were erroeously rejected, then:
* For modules when CONFIG_ARM64_MODULE_PLTS=y, this would result in the
use of a PLT entry, which is benign.
Note that this is the common case, as this is selected by
CONFIG_RANDOMIZE_BASE (and therefore RANDOMIZE_MODULE_REGION_FULL),
which distributions typically seelct. This is also selected by
CONFIG_ARM64_ERRATUM_843419.
* For modules when CONFIG_ARM64_MODULE_PLTS=n, this would result in
internal ftrace failures.
* For core kernel text, this would result in internal ftrace failues.
Note that for this to happen, the kernel text would need to be at
least 128M bytes in size, and typical configurations are smaller tha
this.
Fix this by calculating the offset *from* the branch *to* the target in
both functions.
Fixes: f8af0b364e24 ("arm64: ftrace: don't validate branch via PLT in ftrace_make_nop()")
Fixes: e71a4e1bebaf ("arm64: ftrace: add support for far branches to dynamic ftrace")
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Will Deacon <[email protected]>
Tested-by: "Ivan T. Ivanov" <[email protected]>
Reviewed-by: Chengming Zhou <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
This fixes a regression where coma lead to concatenating board names
and broke module loading for C8H.
Fixes: 5b4285c57b6f ("hwmon: (asus-ec-sensors) fix Formula VIII definition")
Signed-off-by: Michael Carns <[email protected]>
Signed-off-by: Eugene Shalygin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
This reverts commit 73e2d827a501d48dceeb5b9b267a4cd283d6b1ae.
The reverted patch was needed as a fix after commit f5bda35fba61
("random: use static branch for crng_ready()"). However, this was
already fixed by 60e5b2886b92 ("random: do not use jump labels before
they are initialized") and hence no longer necessary to initialise jump
labels before setup_machine_fdt().
Signed-off-by: Catalin Marinas <[email protected]>
|
|
A customer reported a request_socket leak in a Calico cloud environment. We
found that a BPF program was doing a socket lookup with takes a refcnt on
the socket and that it was finding the request_socket but returning the parent
LISTEN socket via sk_to_full_sk() without decrementing the child request socket
1st, resulting in request_sock slab object leak. This patch retains the
existing behaviour of returning full socks to the caller but it also decrements
the child request_socket if one is present before doing so to prevent the leak.
Thanks to Curtis Taylor for all the help in diagnosing and testing this. And
thanks to Antoine Tenart for the reproducer and patch input.
v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to
validate RCU flags on the listen socket so that it balances with bpf_sk_release()
and update comments as per Martin KaFai Lau's suggestion. One small change to
Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra
instruction.
Fixes: f7355a6c0497 ("bpf: Check sk_fullsock() before returning from bpf_sk_lookup()")
Fixes: edbf8c01de5a ("bpf: add skc_lookup_tcp helper")
Co-developed-by: Antoine Tenart <[email protected]>
Signed-off-by: Antoine Tenart <[email protected]>
Signed-off-by: Jon Maxwell <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Curtis Taylor <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Instead of printing an error message, kvm_stat script fails when we
restrict statistics to a guest by its name and there are multiple guests
with such name:
# kvm_stat -g my_vm
Traceback (most recent call last):
File "/usr/bin/kvm_stat", line 1819, in <module>
main()
File "/usr/bin/kvm_stat", line 1779, in main
options = get_options()
File "/usr/bin/kvm_stat", line 1718, in get_options
options = argparser.parse_args()
File "/usr/lib64/python3.10/argparse.py", line 1825, in parse_args
args, argv = self.parse_known_args(args, namespace)
File "/usr/lib64/python3.10/argparse.py", line 1858, in parse_known_args
namespace, args = self._parse_known_args(args, namespace)
File "/usr/lib64/python3.10/argparse.py", line 2067, in _parse_known_args
start_index = consume_optional(start_index)
File "/usr/lib64/python3.10/argparse.py", line 2007, in consume_optional
take_action(action, args, option_string)
File "/usr/lib64/python3.10/argparse.py", line 1935, in take_action
action(self, namespace, argument_values, option_string)
File "/usr/bin/kvm_stat", line 1649, in __call__
' to specify the desired pid'.format(" ".join(pids)))
TypeError: sequence item 0: expected str instance, int found
To avoid this, it's needed to convert pids int values to strings before
pass them to join().
Signed-off-by: Dmitry Klochkov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The skb_recv_datagram() in ax25_recvmsg() will hold lock_sock
and block until it receives a packet from the remote. If the client
doesn`t connect to server and calls read() directly, it will not
receive any packets forever. As a result, the deadlock will happen.
The fail log caused by deadlock is shown below:
[ 369.606973] INFO: task ax25_deadlock:157 blocked for more than 245 seconds.
[ 369.608919] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.613058] Call Trace:
[ 369.613315] <TASK>
[ 369.614072] __schedule+0x2f9/0xb20
[ 369.615029] schedule+0x49/0xb0
[ 369.615734] __lock_sock+0x92/0x100
[ 369.616763] ? destroy_sched_domains_rcu+0x20/0x20
[ 369.617941] lock_sock_nested+0x6e/0x70
[ 369.618809] ax25_bind+0xaa/0x210
[ 369.619736] __sys_bind+0xca/0xf0
[ 369.620039] ? do_futex+0xae/0x1b0
[ 369.620387] ? __x64_sys_futex+0x7c/0x1c0
[ 369.620601] ? fpregs_assert_state_consistent+0x19/0x40
[ 369.620613] __x64_sys_bind+0x11/0x20
[ 369.621791] do_syscall_64+0x3b/0x90
[ 369.622423] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 369.623319] RIP: 0033:0x7f43c8aa8af7
[ 369.624301] RSP: 002b:00007f43c8197ef8 EFLAGS: 00000246 ORIG_RAX: 0000000000000031
[ 369.625756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f43c8aa8af7
[ 369.626724] RDX: 0000000000000010 RSI: 000055768e2021d0 RDI: 0000000000000005
[ 369.628569] RBP: 00007f43c8197f00 R08: 0000000000000011 R09: 00007f43c8198700
[ 369.630208] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff845e6afe
[ 369.632240] R13: 00007fff845e6aff R14: 00007f43c8197fc0 R15: 00007f43c8198700
This patch replaces skb_recv_datagram() with an open-coded variant of it
releasing the socket lock before the __skb_wait_for_more_packets() call
and re-acquiring it after such call in order that other functions that
need socket lock could be executed.
what's more, the socket lock will be released only when recvmsg() will
block and that should produce nicer overall behavior.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Thomas Osterried <[email protected]>
Signed-off-by: Duoming Zhou <[email protected]>
Reported-by: Thomas Habets <thomas@@habets.se>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Don't let io_fill_cqe_aux() post 16B cqes for CQE32 rings, neither the
kernel nor the userspace expect this to happen.
Fixes: 76c68fbf1a1f9 ("io_uring: enable CQE32")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/64fae669fae1b7083aa15d0cd807f692b0880b9a.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
In preparation for the following patch, inline __io_fill_cqe(), there is
only one user.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/71dab9afc3cde3f8b64d26f20d3b60bdc40726ff.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
We don't really know the state of req->extra{1,2] fields in
__io_fill_cqe_req(), if an opcode handler is not aware of CQE32 option,
it never sets them up properly. Track the state of those fields with a
request flag.
Fixes: 76c68fbf1a1f9 ("io_uring: enable CQE32")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/4b3e5be512fbf4debec7270fd485b8a3b014d464.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
The only user of io_req_complete32()-like functions is cmd
requests. Instead of keeping the whole complete32 family, remove them
and provide the extras in already added for inline completions
req->extra{1,2}. When fill_cqe_res() finds CQE32 option enabled
it'll use those fields to fill a 32B cqe.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/af1319eb661b1f9a0abceb51cbbf72b8002e019d.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
We want just one function that will handle both normal cqes and 32B
cqes. Combine __io_fill_cqe_req() and __io_fill_cqe_req32(). It's still
not entirely correct yet, but saves us from cases when we fill an CQE of
a wrong size.
Fixes: 76c68fbf1a1f9 ("io_uring: enable CQE32")
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/8085c5b2f74141520f60decd45334f87e389b718.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
There are too many cqe filling helpers, kill __io_fill_cqe{32}_req(),
use __io_fill_cqe{32}_req_filled() instead, and then rename it. It'll
simplify fixing in following patches.
Signed-off-by: Pavel Begunkov <[email protected]>
Link: https://lore.kernel.org/r/c18e0d191014fb574f24721245e4e3fddd0b6917.1655287457.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <[email protected]>
|
|
The extra byte inserted by usbnet.c when
(length % dev->maxpacket == 0) is causing problems to device.
This patch sets FLAG_SEND_ZLP to avoid this.
Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Problems observed:
======================================================================
1) Using ssh/sshfs. The remote sshd daemon can abort with the message:
"message authentication code incorrect"
This happens because the tcp message sent is corrupted during the
USB "Bulk out". The device calculate the tcp checksum and send a
valid tcp message to the remote sshd. Then the encryption detects
the error and aborts.
2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out
3) Stop normal work without any log message.
The "Bulk in" continue receiving packets normally.
The host sends "Bulk out" and the device responds with -ECONNRESET.
(The netusb.c code tx_complete ignore -ECONNRESET)
Under normal conditions these errors take days to happen and in
intense usage take hours.
A test with ping gives packet loss, showing that something is wrong:
ping -4 -s 462 {destination} # 462 = 512 - 42 - 8
Not all packets fail.
My guess is that the device tries to find another packet starting
at the extra byte and will fail or not depending on the next
bytes (old buffer content).
======================================================================
Signed-off-by: Jose Alonso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-14
This series contains updates to ice driver only.
Michal fixes incorrect Tx timestamp offset calculation for E822 devices.
Roman enforces required VLAN filtering settings for double VLAN mode.
Przemyslaw fixes memory corruption issues with VFs by ensuring
queues are disabled in the error path of VF queue configuration and to
disabled VFs during reset.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Maintainers of the directory Documentation/devicetree/bindings/net
are also the maintainers of the corresponding directory
include/dt-bindings/net.
Add the file entry for include/dt-bindings/net to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It turned out that Lenovo shipped two completely different products
with the very same PCI SSID, where both require different quirks;
namely, Lenovo C940 has already the fixup for its speaker
(ALC298_FIXUP_LENOVO_SPK_VOLUME) with the PCI SSID 17aa:3818, while
Yoga Duet 7 has also the very same PCI SSID but requires a different
quirk, ALC287_FIXUP_YOGA7_14TIL_SPEAKERS.
Fortunately, both are with different codecs (C940 with ALC298 and Duet
7 with ALC287), hence we can apply different fixes by checking the
codec ID. This patch implements that special fixup function.
For easier handling, the internal function for applying a specific
fixup entry is exported as __snd_hda_apply_fixup(), so that it can be
called from the codec driver. The rest is simply calling it with a
different fixup ID depending on the codec ID.
Reported-by: Hans de Goede <[email protected]>
Tested-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|