| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The Kconfig for this support is currently:
config IDEPCI_PCIBUS_ORDER
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
...meaning that it currently is not being built as a module by anyone.
Lets change the initcall to be the equivalent device_initcall, so that
when reading the driver code, there is no doubt it is builtin-only.
Unlike other similar changes, we leave the module.h header to be
included since this code interacts with other drivers and needs to
know what a struct module is.
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ide_dma_ops structures are never modified, so declare these as const,
as is already done for the others.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Back in the day we used to just say this code was root only so it was
ok that the bounds checking was sloppy. These days it annoys static
checkers so we fix it.
In the original code "c > INT_MAX" was never true since "c" was an int.
I am not sure what was intended so I left it alone. But because I made
"c" unsigned it means we don't have a warning any more.
The second warning is that we cap "i" but allow negatives leading to an
underflow of the ide_disks_chs[] array. The third set of warnings is
because these values come from the user and we cap most of the upper
bounds but allow negative values. Negative cylinders doesn't make
sense.
drivers/ide/ide.c:262 ide_set_disk_chs() warn: impossible condition '(c > ((~0 >> 1))) => (s32min-s32max > s32max)'
drivers/ide/ide.c:270 ide_set_disk_chs() warn: check 'ide_disks_chs[i]' for negative offsets 'i' = s32min. extra = 's32min-19'
drivers/ide/ide.c:271 ide_set_disk_chs() warn: no lower bound on 'h'
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It was seen that defective configurations of openvswitch could overwrite
the STACK_END_MAGIC and cause a hard crash of the kernel because of too
many recursions within ovs.
This problem arises due to the high stack usage of openvswitch. The rest
of the kernel is fine with the current limit of 10 (RECURSION_LIMIT).
We use the already existing recursion counter in ovs_execute_actions to
implement an upper bound of 5 recursions.
Cc: Pravin Shelar <[email protected]>
Cc: Simon Horman <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Simon Horman <[email protected]>
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We can't be within an RCU read-side critical section when deleting
VLANs, as underlying drivers might sleep during the hardware operation.
Therefore, replace the RCU critical section with a mutex. This is
consistent with team_vlan_rx_add_vid.
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The current upstreaming code fails to set the tso_mode register
when initilizes, when processes large size packets, the default 4 bd is
not enough, so this patch initilizes it and set the default value to 8 bds
Signed-off-by: Daode Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With gcc < 4.3 __UNIQUE_ID does not create unique ids with the macro
BRCMF_FW_NVRAM_DEF. Fix this by removing the MODULE_FIRMWARE instance
for the nvram file. This file is not in linux-firmware repo so it may
not be needed anyway. Otherwise consider this as a temporary fix.
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Arend van Spriel <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Unregister the chain type and return error, otherwise this leaks the
subscription to the netdevice notifier call chain.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
In case MSS option is added in TCP options, skb length increases by 4.
IPv6 needs to update skb->csum if skb has CHECKSUM_COMPLETE,
otherwise kernel complains loudly in netdev_rx_csum_fault() with a
stack dump.
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
As seen by Julia, the initial allocation memory is not checked anymore
after commit "video: fbdev: pxafb: initial devicetree conversion".
Introduce back the removed test.
Reported-by: Julia Lawall <[email protected]>
Signed-off-by: Robert Jarzmik <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
|
|
Pull audit updates from Paul Moore:
"Seven audit patches for 4.5, all very minor despite the diffstat.
The diffstat churn for linux/audit.h can be attributed to needing to
reshuffle the linux/audit.h header to fix the seccomp auditing issue
(see the commit description for details).
Besides the seccomp/audit fix, most of the fixes are around trying to
improve the connection with the audit daemon and a Kconfig
simplification. Nothing crazy, and everything passes our little
audit-testsuite"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: always enable syscall auditing when supported and audit is enabled
audit: force seccomp event logging to honor the audit_enabled flag
audit: Delete unnecessary checks before two function calls
audit: wake up threads if queue switched from limited to unlimited
audit: include auditd's threads in audit_log_start() wait exception
audit: remove audit_backlog_wait_overflow
audit: don't needlessly reset valid wait time
|
|
Commit b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when
MADV_FREE syscall is called") introduced this new function, but got the
error handling for when pmd_trans_huge_lock() fails wrong. In the
failure case, the lock has not been taken, and we should not unlock on
the way out.
Cc: Minchan Kim <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This just fixes a warning on 64-bit builds:
drivers/gpu/drm/vc4/vc4_validate.c: In function ‘validate_gl_shader_rec’:
drivers/gpu/drm/vc4/vc4_validate.c:864:12: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Also use them instead of a magic value when enabling the interrupts.
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
at803x currently automatically enables the RGMII TX clock delay when the
phy interface mode is PHY_INTERFACE_MODE_RGMII_TXID. The same should be
done when PHY_INTERFACE_MODE_RGMII_ID is specified.
Use a similar logic to enable the RGMII RX clock delay as well.
at803x_context_{save,restore} were not touched because these are only
used on AR8030 which is a RMII phy (RGMII clock delays are irrelevant).
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 8030 is only a "RMII Fast Ethernet PHY", thus it must not have the
SUPPORTED_1000* bits set.
Signed-off-by: Martin Blumenstingl <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Code generation functions in arch/arm64/kernel/insn.c previously
BUG_ON invalid parameters. Following change of that behavior, now we
need to handle the error case where AARCH64_BREAK_FAULT is returned.
Instead of error-handling on every emit() in JIT, we add a new
validation pass at the end of JIT compilation. There's no point in
running JITed code at run-time only to trap due to AARCH64_BREAK_FAULT.
Instead, we drop this failed JIT compilation and allow the system to
gracefully fallback on the BPF interpreter.
Signed-off-by: Zi Shen Lim <[email protected]>
Suggested-by: Alexei Starovoitov <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
During code generation, we used to BUG_ON unknown/unsupported encoding
or invalid parameters.
Instead, now we report these as errors and simply return the
instruction AARCH64_BREAK_FAULT. Users of these codegen helpers should
check for and handle this failure condition as appropriate.
Otherwise, unhandled codegen failure will result in trapping at
run-time due to AARCH64_BREAK_FAULT, which is arguably better than a
BUG_ON.
Signed-off-by: Zi Shen Lim <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Re-establish the previous behavior and avoid hashing temporary asocs by
checking t->asoc->temp in sctp_(un)hash_transport. Also, remove the
check of t->asoc->temp in __sctp_lookup_association, since they are
never hashed now.
Fixes: 4f0087812648 ("sctp: apply rhashtable api to send/recv path")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Reported-by: Vlad Yasevich <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.5. I don't think I've missed
anything too major, I'm mostly back at work now but I'll probably get
some sleep in 5 years time.
Summary:
New drivers:
- etnaviv:
GPU driver for the 3D core on the Vivante core used in numerous
ARM boards.
Highlights:
Core:
- Atomic suspend/resume helpers
- Move the headers to using userspace friendlier types.
- Documentation updates
- Lots of struct_mutex removal.
- Bunch of DP MST fixes from AMD.
Panel:
- More DSI helpers
- Support for some new basic panels
i915:
- Basic Kabylake support
- DP link training and detect code refactoring
- fbc/psr fixes
- FIFO underrun fixes
- SDE interrupt handling fixes
- dma-buf/fence support in pageflip path.
- GPU side for MST audio support
radeon/amdgpu:
- Drop UMS support
- GPUVM/Scheduler optimisations
- Initial Powerplay support for Tonga/Fiji/CZ/ST
- ACP audio prerequisites
nouveau:
- GK20a instmem improvements
- PCIE link speed change support
msm:
- DSI support for msm8960/apq8064
tegra:
- Host1X support for Tegra210 SoC
vc4:
- 3D acceleration support
armada:
- Get rid of struct mutex
tda998x:
- Atomic modesetting support
- TMDS clock limitations
omapdrm:
- Atomic modesetting support
- improved TILER performance
rockchip:
- RK3036 VOP support
- Atomic modesetting support
- Synopsys DW MIPI DSI support
exynos:
- Runtime PM support
- of_graph binding for DP panels
- Cleanup of IPP code
- Configurable plane support
- Kernel panic fixes at release time"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
drm/amdgpu: add missing irq.h include
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
drm: nouveau: fix nouveau_debugfs_init prototype
drm/nouveau/pci: fix check in nvkm_pcie_set_link
drm/amdgpu: validate duplicates first
drm/amdgpu: move VM page tables to the LRU end on CS v2
drm/ttm: add ttm_bo_move_to_lru_tail function v2
drm/ttm: fix adding foreign BOs to the swap LRU
drm/ttm: fix adding foreign BOs to the LRU during init v2
drm/radeon: use kobj_to_dev()
drm/amdgpu: use kobj_to_dev()
drm/amdgpu/cz: force vce clocks when sclks are forced
drm/amdgpu/cz: force uvd clocks when sclks are forced
drm/amdgpu/cz: add code to enable forcing VCE clocks
drm/amdgpu/cz: add code to enable forcing UVD clocks
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amd/powerplay: fix static checker warning for return meaningless value.
drm/sysfs: use kobj_to_dev()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to firmware class tests
- fixes and cleans up several existing tests"
* tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: firmware: add empty string and async tests
firmware: actually return NULL on failed request_firmware_nowait()
test: firmware_class: add asynchronous request trigger
test: firmware_class: use kstrndup() where appropriate
test: firmware_class: report errors properly on failure
selftests/seccomp: fix 32-bit build warnings
add breakpoints/.gitignore
add ptrace/.gitignore
update .gitignore in selftests/timers
update .gitignore in selftests/vm
tools, testing, add test for intel_pstate driver
selftest/ipc: actually test it
selftests/capabilities: actually test it
selftests/capabilities: clean up for Makefile
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parsic updates from Helge Deller:
"This patchset includes two major fixes which are both scheduled for
stable:
First, __ARCH_SI_PREAMBLE_SIZE was defined with a wrong value.
Second, huge page pte and TLB changes needed protection with a
spinlock. Other than that there are just some trivial optimizations
and cleanups"
* 'parisc-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Protect huge page pte changes with spinlocks
parisc: Imporove debug info about space registers and TLB configuration
parisc: Drop parisc-specific NSIGTRAP define
parisc: Fix __ARCH_SI_PREAMBLE_SIZE
parisc: Reduce overhead of parisc_requires_coherency()
parisc: Initialize PCI bridge cache line and default latency
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
misc i915 fixes all over the place.
* tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel:
drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page
drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long.
drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
drm/i915: shut up gen8+ SDE irq dmesg noise, again
drm/i915: Restore inhibiting the load of the default context
drm/i915: Tune down rpm wakelock debug checks
drm/i915: Avoid writing relocs with addresses in non-canonical form
drm/i915: Move Braswell stop_machine GGTT insertion workaround
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
Since your main drm-next pull isn't out of the door yet I figured I might
as well flush out drm-misc instead of delaying for 4.6. It's really just
random stuff all over, biggest thing probably connector_mask tracking from
Maarten.
* tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits)
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
drm/sysfs: use kobj_to_dev()
drm/i915: Init power domains early in driver load
drm: Do not set connector->encoder in drivers
apple-gmux: Add initial documentation
drm: move MODULE_PARM_DESC to other file
drm/edid: index CEA/HDMI mode tables using the VIC
drm/atomic: Remove drm_atomic_connectors_for_crtc.
drm/i915: Update connector_mask during readout, v2.
drm: Remove opencoded drm_gem_object_release_handle()
drm: Do not set outparam on error during GEM handle allocation
drm/docs: more leftovers from the big vtable documentation pile
drm/atomic-helper: Reject legacy flips on a disabled pipe
drm/atomic: add connector mask to drm_crtc_state.
drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2.
drm/atomic: Add __drm_atomic_helper_connector_reset, v2.
drm/i915: Set connector_state->connector using the helper.
drm: Use a normal idr allocation for the obj->name
drm: Only bump object-reference count when adding first handle
drm: Balance error path for GEM handle allocation
...
|
|
Merge second patch-bomb from Andrew Morton:
- more MM stuff:
- Kirill's page-flags rework
- Kirill's now-allegedly-fixed THP rework
- MADV_FREE implementation
- DAX feature work (msync/fsync). This isn't quite complete but DAX
is new and it's good enough and the guys have a handle on what
needs to be done - I expect this to be wrapped in the next week or
two.
- some vsprintf maintenance work
- various other misc bits
* emailed patches from Andrew Morton <[email protected]>: (145 commits)
printk: change recursion_bug type to bool
lib/vsprintf: factor out %pN[F] handler as netdev_bits()
lib/vsprintf: refactor duplicate code to special_hex_number()
printk-formats.txt: remove unimplemented %pT
printk: help pr_debug and pr_devel to optimize out arguments
lib/test_printf.c: test dentry printing
lib/test_printf.c: add test for large bitmaps
lib/test_printf.c: account for kvasprintf tests
lib/test_printf.c: add a few number() tests
lib/test_printf.c: test precision quirks
lib/test_printf.c: check for out-of-bound writes
lib/test_printf.c: don't BUG
lib/kasprintf.c: add sanity check to kvasprintf
lib/vsprintf.c: warn about too large precisions and field widths
lib/vsprintf.c: help gcc make number() smaller
lib/vsprintf.c: expand field_width to 24 bits
lib/vsprintf.c: eliminate potential race in string()
lib/vsprintf.c: move string() below widen_string()
lib/vsprintf.c: pull out padding code from dentry_name()
printk: do cond_resched() between lines while outputting to consoles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"Here is the bulk of GPIO changes for v4.5.
Notably there are big refactorings mostly by myself, aimed at getting
the gpio_chip into a shape that makes me believe I can proceed to
preserve state for a proper userspace ABI (character device) that has
already been proposed once, but resulted in the feedback that I need
to go back and restructure stuff. So I've been restructuring stuff.
On the way I ran into brokenness (return code from the get_value()
callback) and had to fix it. Also, refactored generic GPIO to be
simpler.
Some of that is still waiting to trickle down from the subsystems all
over the kernel that provide random gpio_chips, I've touched every
single GPIO driver in the kernel now, oh man I didn't know I was
responsible for so much...
Apart from that we're churning along as usual.
I took some effort to test and retest so it should merge nicely and we
shook out a couple of bugs in -next.
Infrastructural changes:
- In struct gpio_chip, rename the .dev node to .parent to better
reflect the fact that this is not the GPIO struct device
abstraction. We will add that soon so this would be totallt
confusing.
- It was noted that the driver .get_value() callbacks was sometimes
reporting negative -ERR values to the gpiolib core, expecting them
to be propagated to consumer gpiod_get_value() and gpio_get_value()
calls. This was not happening, so as there was a mess of drivers
returning negative errors and some returning "anything else than
zero" to indicate that a line was active. As some would have bit
31 set to indicate "line active" it clashed with negative error
codes. This is fixed by the largeish series clamping values in all
drivers with !!value to [0,1] and then augmenting the code to
propagate error codes to consumers. (Includes some ACKed patches
in other subsystems.)
- Add a void *data pointer to struct gpio_chip. The container_of()
design pattern is indeed very nice, but we want to reform the
struct gpio_chip to be a non-volative, stateless business, and keep
states internal to the gpiolib to be able to hold on to the state
when adding a proper userspace ABI (character device) further down
the road. To achieve this, drivers need a handle at the internal
state that is not dependent on their struct gpio_chip() so we add
gpiochip_add_data() and gpiochip_get_data() following the pattern
of many other subsystems. All the "use gpiochip data pointer"
patches transforms drivers to this scheme.
- The Generic GPIO chip header has been merged into the general
<linux/gpio/driver.h> header, and the custom header for that
removed. Instead of having a separate mm_gpio_chip struct for
these generic drivers, merge that into struct gpio_chip,
simplifying the code and removing the need for separate and
confusing includes.
Misc improvements:
- Stabilize the way GPIOs are looked up from the ACPI legacy
specification.
- Incremental driver features for PXA, PCA953X, Lantiq (patches from
the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
New drivers:
- Add a GPIO chip to the ALSA SoC AC97 driver.
- Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
but the branch is merged here too to account for infrastructural
changes).
- The sx150x driver now supports the sx1502"
* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
gpio: generic: make bgpio_pdata always visible
gpiolib: fix chip order in gpio list
gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
gpio: brcmstb: Allow building driver for BMIPS_GENERIC
gpio: brcmstb: Set endian flags for big-endian MIPS
gpio: moxart: fix build regression
gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
leds: pca9532: use gpiochip data pointer
leds: tca6507: use gpiochip data pointer
hid: cp2112: use gpiochip data pointer
bcma: gpio: use gpiochip data pointer
avr32: gpio: use gpiochip data pointer
video: fbdev: via: use gpiochip data pointer
gpio: pch: Optimize pch_gpio_get()
Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
pinctrl: nsp-gpio: use gpiochip data pointer
pinctrl: vt8500-wmt: use gpiochip data pointer
pinctrl: exynos5440: use gpiochip data pointer
pinctrl: at91-pio4: use gpiochip data pointer
...
|
|
Pull watchdog updates from Wim Van Sebroeck:
"This adds following items:
- watchdog restart handler support
- watchdog reboot notifier support
- watchdog sysfs attributes
- support for the following new devices: AMD Mullins platform, AMD
Carrizo platform, meson8b SoC, CSRatlas7, TS-4800, Alphascale
asm9260-wdt, Zodiac, Sigma Designs SMP86xx/SMP87xx
- Changes in refcounting for the watchdog core
- watchdog core improvements
- and small fixes"
* git://www.linux-watchdog.org/linux-watchdog: (60 commits)
watchdog: asm9260: remove __init and __exit annotations
watchdog: Drop pointer to watchdog device from struct watchdog_device
watchdog: ziirave: Use watchdog infrastructure to create sysfs attributes
watchdog: Add support for creating driver specific sysfs attributes
watchdog: kill unref/ref ops
watchdog: stmp3xxx: Remove unused variables
watchdog: add MT7621 watchdog support
hwmon: (sch56xx) Drop watchdog driver data reference count callbacks
watchdog: da9055_wdt: Drop reference counting
watchdog: da9052_wdt: Drop reference counting
watchdog: Separate and maintain variables based on variable lifetime
watchdog: diag288: Stop re-using watchdog core internal flags
watchdog: Create watchdog device in watchdog_dev.c
watchdog: qcom-wdt: Do not set 'dev' in struct watchdog_device
watchdog: mena21: Do not use device pointer from struct watchdog_device
watchdog: gpio: Do not use device pointer from struct watchdog_device
watchdog: tangox: Print info message using pointer to platform device
watchdog: bcm2835_wdt: Drop log message if watchdog is stopped
devicetree: watchdog: add binding for Sigma Designs SMP8642 watchdog
watchdog: add support for Sigma Designs SMP86xx/SMP87xx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've had quite busy weeks in this cycle. Looking at ALSA core, the
significant changes are a few fixes wrt timer and sequencer ioctls
that have been revealed by fuzzer recently. Other than that, ASoC
core got a few updates about DAI link handling, but these are rather
straightforward refactoring.
In drivers scene, ASoC received quite lots of new drivers in addition
to bunch of updates for still ongoing Intel Skylake support and
topology API. HD-audio gained a new HDMI/DP hotplug notification via
component. FireWire got a pile of code refactoring/updates with
SCS.1x driver integration.
More highlights are shown below.
[ NOTE: this contains also many commits for DRM. This is due to the
pull of drm stable branch into sound tree, as the base of i915 audio
component work for HD-audio. The highlights below don't contain
these DRM changes, as these are supposed to be pulled via drm tree
in anyway sooner or later. ]
Core:
- Handful fixes to harden ALSA timer and sequencer ioctls against
races reported by syzkaller fuzzer
- Irq description string can be unique to each card; only for
HD-audio for now
ASoC:
- Conversion of the array of DAI links to a list for supporting
dynamically adding and removing DAI links
- Topology API enhancements to make everything more component based
and being able to specify PCM links via topology
- Some more fixes for the topology code, though it is still not final
and ready for enabling in production; we really need to get to the
point where that can be done
- A pile of changes for Intel SkyLake drivers which hopefully deliver
some useful initial functionality for systems with this chipset,
though there is more work still to come
- Lots of new features and cleanups for the Renesas drivers
- ANC support for WM5110
- New drivers: Imagination Technologies IPs, Atmel class D speaker,
Cirrus CS47L24 and WM1831, Dialog DA7128, Realtek RT5659 and
RT56156, Rockchip RK3036, TI PC3168A, and AMD ACP
- Rename PCM1792a driver to be generic pcm179x
HD-Audio:
- Use audio component for i915 HDMI/DP hotplug handling
- On-demand binding with i915 driver
- bdl_pos_adj parameter adjustment for Baytrail controllers
- Enable power_save_node for CX20722; this shouldn't lead to
regression, hopefully
- Kabylake HDMI/DP codec support
- Quirks for Lenovo E50-80, Dell Latitude E-series, and other Dell
machines
- A few code refactoring
FireWire:
- Lots of code cleanup and refactoring
- Integrate the support of SCS.1x devices into snd-oxfw driver;
snd-scs1x driver is obsoleted
USB-audio:
- Fix possible NULL dereference at disconnection
- A regression fix for Native Instruments devices
Misc:
- A few code cleanups of fm801 driver"
* tag 'sound-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (722 commits)
ALSA: timer: Code cleanup
ALSA: timer: Harden slave timer list handling
ALSA: hda - Add fixup for Dell Latitidue E6540
ALSA: timer: Fix race among timer ioctls
ALSA: hda - add codec support for Kabylake display audio codec
ALSA: timer: Fix double unlink of active_list
ALSA: usb-audio: Fix mixer ctl regression of Native Instrument devices
ALSA: hda - fix the headset mic detection problem for a Dell laptop
ALSA: hda - Fix white noise on Dell Latitude E5550
ALSA: hda_intel: add card number to irq description
ALSA: seq: Fix race at timer setup and close
ALSA: seq: Fix missing NULL check at remove_events ioctl
ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect
ASoC: hdac_hdmi: remove unused hdac_hdmi_query_pin_connlist
ASoC: AMD: Add missing include file
ALSA: hda - Fixup inverted internal mic for Lenovo E50-80
ALSA: usb: Add native DSD support for Oppo HA-1
ASoC: Make aux_dev more like a generic component
ASoC: bcm2835: cleanup includes by ordering them alphabetically
ASoC: AMD: Manage ACP 2.x SRAM banks power
...
|
|
Pull documentation updates from Jon Corbet:
"A relatively boring cycle in the docs tree. There's a few kernel-doc
fixes and various document tweaks.
One patch reaches out of the documentation subtree to fix a comment in
init/do_mounts_rd.c. There didn't seem to be anybody more appropriate
to take that one, so I accepted it"
* tag 'docs-4.5' of git://git.lwn.net/linux: (29 commits)
thermal: add description for integral_cutoff unit
Documentation: update libhugetlbfs site url
Documentation: Explain pci=conf1,conf2 more verbosely
DMA-API: fix confusing sentence in Documentation/DMA-API.txt
Documentation: translations: update linux cross reference link
Documentation: fix typo in CodingStyle
init, Documentation: Remove ramdisk_blocksize mentions
Documentation-getdelays: Apply a recommendation from "checkpatch.pl" in main()
Documentation: HOWTO: update versions from 3.x to 4.x
Documentation: remove outdated references from translations
Doc: treewide: Fix grammar "a" to "an"
Documentation: cpu-hotplug: Fix sysfs mount instructions
can-doc: Add hint about getting timestamps
Fix CFQ I/O scheduler parameter name in documentation
Documentation: arm: remove dead links from Marvell Berlin docs
Documentation: HOWTO: update code cross reference link
Doc: Docbook/iio: Fix typo in iio.tmpl
DocBook: make index.html generation less verbose by default
DocBook: Cleanup: remove an unused $(call) line
DocBook: Add a help message for DOCBOOKS env var
...
|
|
With several ConnectX-4 cards installed on a server, one may receive
irqn > 255 from the kernel API, which we mistakenly trim to 8bit.
This causes EQ creation failure with the following stack trace:
[<ffffffff812a11f4>] dump_stack+0x48/0x64
[<ffffffff810ace21>] __setup_irq+0x3a1/0x4f0
[<ffffffff810ad7e0>] request_threaded_irq+0x120/0x180
[<ffffffffa0923660>] ? mlx5_eq_int+0x450/0x450 [mlx5_core]
[<ffffffffa0922f64>] mlx5_create_map_eq+0x1e4/0x2b0 [mlx5_core]
[<ffffffffa091de01>] alloc_comp_eqs+0xb1/0x180 [mlx5_core]
[<ffffffffa091ea99>] mlx5_dev_init+0x5e9/0x6e0 [mlx5_core]
[<ffffffffa091ec29>] init_one+0x99/0x1c0 [mlx5_core]
[<ffffffff812e2afc>] local_pci_probe+0x4c/0xa0
Fixing it by changing of the irqn type from u8 to unsigned int to
support values > 255
Fixes: 61d0e73e0a5a ('net/mlx5_core: Use the the real irqn in eq->irqn')
Reported-by: Jiri Pirko <[email protected]>
Signed-off-by: Doron Tsur <[email protected]>
Signed-off-by: Matan Barak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In file included from net/ipv4/tcp_ipv4.c:77 (and many more):
include/net/tcp_memcontrol.h:5: warning: ‘struct cgroup_subsys’ declared inside parameter list
include/net/tcp_memcontrol.h:5: warning: its scope is only this definition or declaration, which is probably not what you want
Add forward declarations for all used structures to fix this.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Antonio Quartulli says:
====================
pull request [net]: batman-adv 20160117
here you have a bunch of patches intended for net.
This patchset is provided by Sven Eckelmann and it is basically
fixing 2 major issues that exist in several parts of the code -
that is why we have 8 patches.
The first bugfix (patch 1 and 2) is preventing call_rcu from
being invoked recursively. This would deceive any user waiting
on rcu_barrier() because the latter won't be able to wait for
the nested invocation thus triggering any sort of undefined
behaviours.
The second bugfix (patches from 3 to 8) prevents the code from
freeing rcu protected objects without waiting for the proper grace
period. This issue can potentially lead to wrong memory access
and thus kernel crashes.
Unfortunately this bogus code pattern was copy/pasted
all around the place when developing new features, therefore
Sven diligently created several patches to address each component
independently.
Given that such bugs were introduced quite some time ago, all
the patches except patch 5 should be considered for submission
to stable.
Included changes:
- avoid recursive invocations of call_rcu() which would fool users waiting on
rcu_barrier()
- prevent immediate kfree of objects used in rcu protected contexts
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
`recursion_bug' is used as recursion_bug toggle, so make it `bool'.
Signed-off-by: Sergey Senozhatsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Move switch case to the netdev_features_string() and rename it to
netdev_bits(). In the future we can extend it as needed.
Here we replace the fallback of %pN from '%p' with possible flags to
sticter '0x%p' without any flags variation.
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
special_hex_number() is a helper to print a fixed size type in a hex
format with '0x' prefix, zero padding, and small letters. In the module
we have already several copies of such code. Consolidate them under
special_hex_number() helper.
There are couple of differences though.
It seems nobody cared about the output in case of CONFIG_KALLSYMS=n,
when printing symbol address, because the asked field width is not
enough to care last 2 characters in the string represantation of the
pointer. Fixed here.
The %pNF specifier used to be allowed with a specific field width,
though there is neither any user of it nor mention the possibility in
the documentation.
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Rasmus Villemoes <[email protected]>
Cc: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
%pT for task->comm has been proposed (several times, I think), but is
not actually implemented. Remove it from printk-formats.txt and add it
back if/when it gets implemented.
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, pr_debug and pr_devel will not elide function call arguments
appearing in calls to the no_printk for these macros. This is because
all side effects must be honored before proceeding to the 0-value
assignment in no_printk.
The behavior is contrary to documentation found in the CodingStyle and
the header file where these functions are declared.
This patch corrects that behavior by shunting out the call to no_printk
completely. The format string is still checked by gcc for correctness,
but no code seems to be emitted in common cases.
[[email protected]: remove braces, per Joe]
Fixes: 5264f2f75d86 ("include/linux/printk.h: use and neaten no_printk")
Signed-off-by: Aaron Conole <[email protected]>
Reported-by: Dmitry Vyukov <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Jason Baron <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Following "lib/vsprintf.c: expand field_width to 24 bits", let's add a
test to see that we now actually support bitmaps with 65536 bits.
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
These should also count as performed tests.
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This adds a few tests to test_number, one of which serves to document
another deviation from POSIX/C99 (printing 0 with an explicit precision
of 0).
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kernel's printf doesn't follow the standards in a few corner cases
(which are probably mostly irrelevant). Add tests that document the
current behaviour.
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add a few padding bytes on either side of the test buffer, and check
that these (and the part of the buffer not used) are untouched by
vsnprintf.
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
BUG is a completely unnecessarily big hammer, and we're more likely to
get the internal bug reported if we just pr_err() and ensure the test
suite fails.
Signed-off-by: Rasmus Villemoes <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kasprintf relies on being able to replay the formatting and getting the
same result (in particular, the same length). This will almost always
work, but it is possible that the object pointed to by a %s or %p
argument changed under us (so we might get truncated output). Add a
somewhat paranoid sanity check and let's see if it ever triggers.
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The field width is overloaded to pass some extra information for some %p
extensions (e.g. #bits for %pb). But we might silently truncate the
passed value when we stash it in struct printf_spec (see e.g.
"lib/vsprintf.c: expand field_width to 24 bits"). Hopefully 23 value
bits should now be enough for everybody, but if not, let's make some
noise.
Do the same for the precision. In both cases, clamping seems more
sensible than truncating. While, according to POSIX, "A negative
precision is taken as if the precision were omitted.", the kernel's
printf has always treated that case as if the precision was 0, so we use
that as lower bound. For the field width, the smallest representable
value is actually -(1<<23), but a negative field width means 'set the
LEFT flag and use the absolute value', so we want the absolute value to
fit.
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
One consequence of the reorganization of struct printf_spec to make
field_width 24 bits was that number() gained about 180 bytes. Since
spec is never passed to other functions, we can help gcc make number()
lose most of that extra weight by using local variables for the field
width and precision.
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Maurizio Lombardi <[email protected]>
Cc: Tejun Heo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Maurizio Lombardi reported a problem [1] with the %pb extension: It
doesn't work for sufficiently large bitmaps, since the size is stashed
in the field_width field of the struct printf_spec, which is currently
an s16. Concretely, this manifested itself in
/sys/bus/pseudo/drivers/scsi_debug/map being empty, since the bitmap
printer got a size of 0, which is the 16 bit truncation of the actual
bitmap size.
We do want to keep struct printf_spec at 8 bytes so that it can cheaply
be passed by value. The qualifier field is only used for internal
bookkeeping in format_decode, so we might as well use a local variable
for that. This gives us an additional 8 bits, which we can then use for
the field width.
To stay in 8 bytes, we need to do a little rearranging and make the type
member a bitfield as well. For consistency, change all the members to
bit fields. gcc doesn't generate much worse code with these changes (in
fact, bloat-o-meter says we save 300 bytes - which I think is a little
surprising).
I didn't find a BUILD_BUG/compiletime_assertion/... which would work
outside function context, so for now I just open-coded it.
[1] http://thread.gmane.org/gmane.linux.kernel/2034835
[[email protected]: avoid open-coded BUILD_BUG_ON]
Signed-off-by: Rasmus Villemoes <[email protected]>
Reported-by: Maurizio Lombardi <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|