aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-16net: team: Unsync device addresses on ndo_stopBenjamin Poirier1-6/+18
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier1-12/+35
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier4-16/+10
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16Merge branch '100GbE' of ↵David S. Miller4-25/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf) This series contains updates to ice and iavf drivers. Dave removes extra unplug of auxiliary bus on reset which caused a scheduling while atomic to be reported for ice. Ding Hui defers setting of queues for TCs to ensure valid configuration and restores old config if invalid for ice. Sylwester fixes a check of setting MAC address to occur after result is received from PF for iavf driver. Brett changes check of ring tail to use software cached value as not all devices have access to register tail for iavf driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: marvell: prestera: add support for for Aldrin2Oleksandr Mazur1-0/+1
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by: Oleksandr Mazur <[email protected]> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <[email protected]>
2022-09-16net/ieee802154: fix uninit value bug in dgram_sendmsgHaimin Zhang2-19/+60
There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by: Haimin Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16xen/xenbus: fix xenbus_setup_ring()Juergen Gross1-3/+6
Commit 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") introduced an error for initialization of multi-page rings. Cc: [email protected] Fixes: 4573240f0764 ("xen/xenbus: eliminate xenbus_grant_ring()") Reported-by: Sander Eikelenboom <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Oleksandr Tyshchenko <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2022-09-16Merge tag 'drm-intel-fixes-2022-09-15' of ↵Dave Airlie6-40/+22
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place. (Ville) - Fix perf limit reasons bit position. (Ashutosh) - Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh) - A vma_move_to_active fix for a regression with video decoding. (Nirmoy) - DP DSP fix. (Ankit) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-16Merge tag 'drm-misc-fixes-2022-09-15' of ↵Dave Airlie14-34/+38
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gma500: Locking and IRQ fixes * meson: OSD1 display fixes * panel-edp: Fix Innolux timings * rockchip: DP/HDMI fixes Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
2022-09-16Merge tag 'amd-drm-fixes-6.0-2022-09-14' of ↵Dave Airlie39-834/+595
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-14: amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-15scsi: mpt3sas: Fix return value check of dma_get_required_mask()Sreekanth Reddy1-1/+1
Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/[email protected] Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-09-15scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()Rafael Mendonca1-1/+3
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") made the __qlt_24xx_handle_abts() function return early if tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean up the allocated memory for the management command. Link: https://lore.kernel.org/r/[email protected] Fixes: 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG") Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Rafael Mendonca <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-09-15scsi: qedf: Fix a UAF bug in __qedf_probe()Letu Ren1-5/+0
In __qedf_probe(), if qedf->cdev is NULL which means qed_ops->common->probe() failed, then the program will goto label err1, and scsi_host_put() will free lport->host pointer. Because the memory qedf points to is allocated by libfc_host_alloc(), it will be freed by scsi_host_put(). However, the if statement below label err0 only checks whether qedf is NULL but doesn't check whether the memory has been freed. So a UAF bug can occur. There are two ways to reach the statements below err0. The first one is described as before, "qedf" should be set to NULL. The second one is goto "err0" directly. In the latter scenario qedf hasn't been changed and it has the initial value NULL. As a result the if statement is not reachable in any situation. The KASAN logs are as follows: [ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] [ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 2.312969] Call Trace: [ 2.312969] dump_stack_lvl+0x59/0x7b [ 2.312969] print_address_description+0x7c/0x3b0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] __kasan_report+0x160/0x1c0 [ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] kasan_report+0x4b/0x70 [ 2.312969] ? kobject_put+0x25d/0x290 [ 2.312969] kasan_check_range+0x2ca/0x310 [ 2.312969] __qedf_probe+0x5dcf/0x6bc0 [ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0 [ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120 [ 2.312969] ? rpm_resume+0xa5c/0x16e0 [ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160 [ 2.312969] local_pci_probe+0x13c/0x1f0 [ 2.312969] pci_device_probe+0x37e/0x6c0 Link: https://lore.kernel.org/r/[email protected] Reported-by: Zheyu Ma <[email protected]> Acked-by: Saurav Kashyap <[email protected]> Co-developed-by: Wende Tan <[email protected]> Signed-off-by: Wende Tan <[email protected]> Signed-off-by: Letu Ren <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-09-15Merge tag 'at91-fixes-6.0-2' of ↵Arnd Bergmann1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 6.0 #2 It contains a fix for LAN966 SoCs that corrects the interrupt number for internal PHYs. * tag 'at91-fixes-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: Fix the interrupt number for internal PHYs Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-15io_uring/msg_ring: check file type before puttingJens Axboe1-1/+2
If we're invoked with a fixed file, follow the normal rules of not calling io_fput_file(). Fixed files are permanently registered to the ring, and do not need putting separately. Cc: [email protected] Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <[email protected]>
2022-09-15ALSA: hda/realtek: Add quirk for ASUS GA503R laptopLuke D. Jones1-0/+1
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jackLuke D. Jones1-0/+11
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G513 HP jackLuke D. Jones1-0/+11
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Re-arrange quirk table entriesTakashi Iwai1-3/+3
A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptopCallum Osmotherly1-0/+1
Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15Merge tag 'imx-fixes-6.0-2' of ↵Arnd Bergmann9-18/+31
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.0, 2nd round: - A couple of TQMa8MPQL device tree fixes from Alexander Stein on button GPIOs and PCF85063 RTC alarm pinctrl. - Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix build errors when this SoM dtsi is included on customer carrier boards. - Remove GPU power domain reset from i.MX8MN device tree to fix a sporadical hang seen with GPUMIX powering up. - Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo board. - Add ARCH_NXP back to defconfig, which was dropped accidentally by commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms together"). - Add missing #reset-cells for i.MX8ULP PCC clock controllers. - Update PMIC voltages for imx8mm-verdin board to fix an issue with one Toradex SKU that uses a consumer-grade chip that is capable of going up to 1.8GHz at 1.00V. - A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and phy-mode. * tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header arm64: defconfig: enable ARCH_NXP arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm arm64: dts: imx8mm-verdin: extend pmic voltages arm64: dts: imx8ulp: add #reset-cells for pcc arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs arm64: dts: imx8mn: remove GPU power domain reset arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo Signed-off-by: Arnd Bergmann <[email protected]>
2022-09-15Merge tag 'thunderbolt-for-v6.0-rc6' of ↵Greg Kroah-Hartman2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: "thunderbolt: Fix for v6.0-rc6 This includes a single commit adding missing PCI ID for Intel Maple Ridge Thunderbolt 4 single port controller. This has been in linux-next with no reported issues." * tag 'thunderbolt-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Add support for Intel Maple Ridge single port controller
2022-09-15Revert "driver core: Set fw_devlink.strict=1 by default"Greg Kroah-Hartman1-1/+1
This reverts commit 71066545b48e4259f89481199a0bbc7c35457738. It causes boot problems on some systems, so revert it for now until it is worked out. Cc: Geert Uytterhoeven <[email protected]> Cc: Saravana Kannan <[email protected]> Fixes: 71066545b48e ("driver core: Set fw_devlink.strict=1 by default") Reported-by: Olof Johansson <[email protected]> Link: https://lore.kernel.org/r/CAOesGMjQHhTUMBGHQcME4JBkZCof2NEQ4gaM1GWFgH40+LN9AQ@mail.gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-09-15blk-lib: fix blkdev_issue_secure_eraseMikulas Patocka1-3/+8
There's a bug in blkdev_issue_secure_erase. The statement "unsigned int len = min_t(sector_t, nr_sects, max_sectors);" sets the variable "len" to the length in sectors, but the statement "bio->bi_iter.bi_size = len" treats it as if it were in bytes. The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len << SECTOR_SHIFT" are thinko. This patch fixes it. Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] # v5.19 Fixes: 44abff2c0b97 ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD") Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-15parisc: Allow CONFIG_64BIT with ARCH=pariscHelge Deller1-1/+11
The previous patch triggered a build failure for the debian kernel, which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment variable and uses ARCH=parisc to configure the kernel for 64-bit support. This patch weakens the previous patch while keeping the recommended way to configure the kernel with: ARCH=parisc -> build 32-bit kernel ARCH=parisc64 -> build 64-bit kernel while adding the possibility for debian to configure a 64-bit kernel even if ARCH=parisc is set (PA8X00 CPU has to be selected and CONFIG_64BIT needs to be enabled). The downside of this patch is, that we now have a small window open again where people may get it wrong: if they enable CONFIG_64BIT and try to compile with a 32-bit compiler. Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # 5.15+
2022-09-15parisc: remove obsolete manual allocation aligning in iosapicRolf Eike Beer1-10/+1
kmalloc() returns memory with __assume_kmalloc_alignment, which is __alignof__(unsigned long long) for parisc. Signed-off-by: Rolf Eike Beer <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-09-14drm/amdgpu/mes: zero the sdma_hqd_mask of 2nd SDMA engine for SDMA 6.0.1Yifan Zhang1-0/+3
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-14drm/amdgpu: make sure to init common IP before gmcAlex Deucher1-3/+11
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher2-22/+5
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio ih_doorbell_range() into ih code for vegaAlex Deucher3-3/+8
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14selftests/landlock: Fix out-of-tree buildsMickaël Salaün2-9/+14
These changes simplify the Makefile and handle these 5 ways to build Landlock tests: - make -C tools/testing/selftests/landlock - make -C tools/testing/selftests TARGETS=landlock gen_tar - make TARGETS=landlock kselftest-gen_tar - make TARGETS=landlock O=build kselftest-gen_tar - make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar This also makes $(KHDR_INCLUDES) available to other test collections when building in their directory. Fixes: f1227dc7d041 ("selftests/landlock: fix broken include of linux/landlock.h") Fixes: 3bb267a36185 ("selftests: drop khdr make target") Cc: Anders Roxell <[email protected]> Cc: Guillaume Tucker <[email protected]> Cc: Mark Brown <[email protected]> Cc: Shuah Khan <[email protected]> Signed-off-by: Mickaël Salaün <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-14pinctrl: ocelot: Fix interrupt controllerHoratiu Vultur1-14/+97
When an external device generated a level based interrupt then the interrupt controller could miss the interrupt. The reason is that the interrupt controller can detect only link changes. In the following example, if there is a PHY that generates an interrupt then the following would happen. The GPIO detected that the interrupt line changed, and then the 'ocelot_irq_handler' was called. Here it detects which GPIO line saw the change and for that will call the following: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask And this works fine for simple cases, but if the PHY generates many interrupts, for example when doing PTP timestamping, then the following could happen. Again the function 'ocelot_irq_handler' will be called and then from here the following could happen: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask Right before step 3(irq_eoi), the PHY will generate another interrupt. Now the interrupt controller will acknowledge the change in the interrupt line. So we miss the interrupt. A solution will be to use 'handle_level_irq' instead of 'handle_fasteoi_irq', because for this will change routine order of handling the interrupt. 1. irq_mask 2. irq_ack 3. phy interrupt routine 4. irq_unmask And now if the PHY will generate a new interrupt before irq_unmask, the interrupt controller will detect this because it already acknowledge the change in interrupt line at step 2(irq_ack). But this is not the full solution because there is another issue. In case there are 2 PHYs that share the interrupt line. For example phy1 generates an interrupt, then the following can happen: 1.irq_mask 2.irq_ack 3.phy0 interrupt routine 4.phy1 interrupt routine 5.irq_unmask In case phy0 will generate an interrupt while clearing the interrupt source in phy1, then the interrupt line will be kept down by phy0. So the interrupt controller will not see any changes in the interrupt line. The solution here is to update 'irq_unmask' such that it can detect if the interrupt line is still active or not. And if it is active then call again the procedure to clear the interrupts. But we don't want to do it every time, only if we know that the interrupt controller has not seen already that the interrupt line has changed. While at this, add support also for IRQ_TYPE_LEVEL_LOW. Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-09-14gpio: mt7621: Make the irqchip immutableSergio Paracuellos1-6/+15
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warnings are now observed for the mt7621 driver: gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it! gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it! gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the mt7621 driver immutable. Tested-by: Arınç ÜNAL <[email protected]> Signed-off-by: Sergio Paracuellos <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-09-14Merge tag 'devicetree-fixes-for-6.0-2' of ↵Linus Torvalds34-43/+44
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Update some stale binding maintainer emails - Fix property name error in apple,aic binding - Add missing param to of_dma_configure_id() stub - Fix an off-by-one error in unflatten_dt_nodes() * tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez of/device: Fix up of_dma_configure_id() stub MAINTAINERS: Update email of Neil Armstrong of: fdt: fix off-by-one error in unflatten_dt_nodes()
2022-09-14ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptopCallum Osmotherly1-0/+1
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the previous Precision 5560. I replicated that patch onto this one, and can confirm that the audio is much better (the woofers are now working); I've tested it on my Dell Precision 5570. Signed-off-by: Callum Osmotherly <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha Signed-off-by: Takashi Iwai <[email protected]>
2022-09-14cifs: update internal module numberSteve French1-2/+2
To 2.39 Signed-off-by: Steve French <[email protected]>
2022-09-14cifs: add missing spinlock around tcon refcountPaulo Alcantara1-0/+3
Add missing spinlock to protect updates on tcon refcount in cifs_put_tcon(). Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-14drm/rockchip: Fix return type of cdn_dp_connector_mode_validNathan Huckleberry1-2/+3
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: [email protected] Signed-off-by: Nathan Huckleberry <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-13cifs: always initialize struct msghdr smb_msg completelyStefan Metzmacher2-13/+4
So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher <[email protected]> Cc: [email protected] Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-13cifs: don't send down the destination address to sendmsg for a SOCK_STREAMStefan Metzmacher1-2/+2
This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher <[email protected]> Cc: [email protected] Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-14arm64: dts: imx8mp-venice-gw74xx: fix port/phy validationTim Harvey1-0/+5
Since commit 65ac79e18120 ("net: dsa: microchip: add the phylink get_caps") the phy-mode must be set otherwise the switch driver will assume "NA" mode and invalidate the port. Fixes: 7899eb6cb15d ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support") Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2022-09-13block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowaitStefan Roesch1-2/+2
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the nowait code path. This is not correct: they should return -EAGAIN instead. This problem was detected by fio. The following command exposed the above problem: t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1 By applying the patch, the retry case is handled correctly in the slow path. Signed-off-by: Stefan Roesch <[email protected]> Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set") Signed-off-by: Jens Axboe <[email protected]>
2022-09-13drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usageNathan Chancellor1-2/+1
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()Nathan Chancellor1-125/+47
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's ↵Nathan Chancellor1-196/+52
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()Nathan Chancellor3-133/+78
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of ↵Nathan Chancellor3-259/+140
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Refactor SubVP calculation to remove FPUAlvin Lee1-45/+44
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Isabella Basso <[email protected]> Cc: Magali Lemes <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Samson Tam <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Co-developed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Limit user regamma to a valid valueYao Wang11-0/+4
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Yao Wang1 <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: add workaround for subvp cursor corruption for DCN32/321Aurabindo Pillai2-2/+4
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.