aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-05-18KVM: PPC: Book3S HV: Lockless tlbie for HPT hcallsNicholas Piggin3-22/+3
tlbies to an LPAR do not have to be serialised since POWER4/PPC970, after which the MMU_FTR_LOCKLESS_TLBIE feature was introduced to avoid tlbie locking. Since commit c17b98cf6028 ("KVM: PPC: Book3S HV: Remove code for PPC970 processors"), KVM no longer supports processors that do not have this feature, so the tlbie locking can be removed completely. A sanity check for the feature is put in kvmppc_mmu_hv_init. Testing was done on a POWER9 system in HPT mode, with a -smp 32 guest in HPT mode. 32 instances of the powerpc fork benchmark from selftests were run with --fork, and the results measured. Without this patch, total throughput was about 13.5K/sec, and this is the top of the host profile: 74.52% [k] do_tlbies 2.95% [k] kvmppc_book3s_hv_page_fault 1.80% [k] calc_checksum 1.80% [k] kvmppc_vcpu_run_hv 1.49% [k] kvmppc_run_core After this patch, throughput was about 51K/sec, with this profile: 21.28% [k] do_tlbies 5.26% [k] kvmppc_run_core 4.88% [k] kvmppc_book3s_hv_page_fault 3.30% [k] _raw_spin_lock_irqsave 3.25% [k] gup_pgd_range Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-18KVM: PPC: Fix a mmio_host_swabbed uninitialized usage issueSimon Guo2-1/+2
When KVM emulates VMX store, it will invoke kvmppc_get_vmx_data() to retrieve VMX reg val. kvmppc_get_vmx_data() will check mmio_host_swabbed to decide which double word of vr[] to be used. But the mmio_host_swabbed can be uninitialized during VMX store procedure: kvmppc_emulate_loadstore \- kvmppc_handle_store128_by2x64 \- kvmppc_get_vmx_data So vcpu->arch.mmio_host_swabbed is not meant to be used at all for emulation of store instructions, and this patch makes that true for VMX stores. This patch also initializes mmio_host_swabbed to avoid possible future problems. Signed-off-by: Simon Guo <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-18KVM: PPC: Move nip/ctr/lr/xer registers to pt_regs in kvm_vcpu_archSimon Guo14-80/+79
This patch moves nip/ctr/lr/xer registers from scattered places in kvm_vcpu_arch to pt_regs structure. cr register is "unsigned long" in pt_regs and u32 in vcpu->arch. It will need more consideration and may move in later patches. Signed-off-by: Simon Guo <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-18KVM: PPC: Add pt_regs into kvm_vcpu_arch and move vcpu->arch.gpr[] into itSimon Guo12-54/+55
Current regs are scattered at kvm_vcpu_arch structure and it will be more neat to organize them into pt_regs structure. Also it will enable reimplementation of MMIO emulation code with analyse_instr() later. Signed-off-by: Simon Guo <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-18Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-nextPaul Mackerras4-7/+247
This merges in the ppc-kvm topic branch of the powerpc repository to get some changes on which future patches will depend, in particular the definitions of various new TLB flushing functions. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S: Change return type to vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler in struct vm_operations_struct. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. commit 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Souptick Joarder <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S: Check KVM_CREATE_SPAPR_TCE_64 parametersAlexey Kardashevskiy1-1/+2
Although it does not seem possible to break the host by passing bad parameters when creating a TCE table in KVM, it is still better to get an early clear indication of that than debugging weird effect this might bring. This adds some sanity checks that the page size is 4KB..16GB as this is what the actual LoPAPR supports and that the window actually fits 64bit space. Signed-off-by: Alexey Kardashevskiy <[email protected]> Acked-by: Balbir Singh <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller ↵Alexey Kardashevskiy2-20/+94
physical pages At the moment we only support in the host the IOMMU page sizes which the guest is aware of, which is 4KB/64KB/16MB. However P9 does not support 16MB IOMMU pages, 2MB and 1GB pages are supported instead. We can still emulate bigger guest pages (for example 16MB) with smaller host pages (4KB/64KB/2MB). This allows the physical IOMMU pages to use a page size smaller or equal than the guest visible IOMMU page size. Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S: Use correct page shift in H_STUFF_TCEAlexey Kardashevskiy2-2/+2
The other TCE handlers use page shift from the guest visible TCE table (described by kvmppc_spapr_tce_iommu_table) so let's make H_STUFF_TCE handlers do the same thing. This should cause no behavioral change now but soon we will allow the iommu_table::it_page_shift being different from from the emulated table page size so this will play a role. Signed-off-by: Alexey Kardashevskiy <[email protected]> Reviewed-by: David Gibson <[email protected]> Acked-by: Balbir Singh <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Fix inaccurate commentPaul Mackerras1-1/+1
We now have interrupts hard-disabled when coming back from kvmppc_hv_entry_trampoline, so this changes the comment to reflect that. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Set RWMR on POWER8 so PURR/SPURR count correctlyPaul Mackerras3-1/+62
Although Linux doesn't use PURR and SPURR ((Scaled) Processor Utilization of Resources Register), other OSes depend on them. On POWER8 they count at a rate depending on whether the VCPU is idle or running, the activity of the VCPU, and the value in the RWMR (Region-Weighting Mode Register). Hardware expects the hypervisor to update the RWMR when a core is dispatched to reflect the number of online VCPUs in the vcore. This adds code to maintain a count in the vcore struct indicating how many VCPUs are online. In kvmppc_run_core we use that count to set the RWMR register on POWER8. If the core is split because of a static or dynamic micro-threading mode, we use the value for 8 threads. The RWMR value is not relevant when the host is executing because Linux does not use the PURR or SPURR register, so we don't bother saving and restoring the host value. For the sake of old userspace which does not set the KVM_REG_PPC_ONLINE register, we set online to 1 if it was 0 at the time of a KVM_RUN ioctl. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Add 'online' register to ONE_REG interfacePaul Mackerras3-0/+9
This adds a new KVM_REG_PPC_ONLINE register which userspace can set to 0 or 1 via the GET/SET_ONE_REG interface to indicate whether it considers the VCPU to be offline (0), that is, not currently running, or online (1). This will be used in a later patch to configure the register which controls PURR and SPURR accumulation. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book 3S HV: Do ptesync in radix guest exit pathPaul Mackerras1-0/+8
A radix guest can execute tlbie instructions to invalidate TLB entries. After a tlbie or a group of tlbies, it must then do the architected sequence eieio; tlbsync; ptesync to ensure that the TLB invalidation has been processed by all CPUs in the system before it can rely on no CPU using any translation that it just invalidated. In fact it is the ptesync which does the actual synchronization in this sequence, and hardware has a requirement that the ptesync must be executed on the same CPU thread as the tlbies which it is expected to order. Thus, if a vCPU gets moved from one physical CPU to another after it has done some tlbies but before it can get to do the ptesync, the ptesync will not have the desired effect when it is executed on the second physical CPU. To fix this, we do a ptesync in the exit path for radix guests. If there are any pending tlbies, this will wait for them to complete. If there aren't, then ptesync will just do the same as sync. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority changeBenjamin Herrenschmidt1-7/+101
When a vcpu priority (CPPR) is set to a lower value (masking more interrupts), we stop processing interrupts already in the queue for the priorities that have now been masked. If those interrupts were previously re-routed to a different CPU, they might still be stuck until the older one that has them in its queue processes them. In the case of guest CPU unplug, that can be never. To address that without creating additional overhead for the normal interrupt processing path, this changes H_CPPR handling so that when such a priority change occurs, we scan the interrupt queue for that vCPU, and for any interrupt in there that has been re-routed, we replace it with a dummy and force a re-trigger. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Tested-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Make radix clear pte when unmappingNicholas Piggin1-1/+1
The current partition table unmap code clears the _PAGE_PRESENT bit out of the pte, which leaves pud_huge/pmd_huge true and does not clear pud_present/pmd_present. This can confuse subsequent page faults and possibly lead to the guest looping doing continual hypervisor page faults. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in ↵Nicholas Piggin1-2/+2
kvmppc_radix_tlbie_page The standard eieio ; tlbsync ; ptesync must follow tlbie to ensure it is ordered with respect to subsequent operations. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17KVM: PPC: Book3S HV: Snapshot timebase offset on guest entryPaul Mackerras4-45/+47
Currently, the HV KVM guest entry/exit code adds the timebase offset from the vcore struct to the timebase on guest entry, and subtracts it on guest exit. Which is fine, except that it is possible for userspace to change the offset using the SET_ONE_REG interface while the vcore is running, as there is only one timebase offset per vcore but potentially multiple VCPUs in the vcore. If that were to happen, KVM would subtract a different offset on guest exit from that which it had added on guest entry, leading to the timebase being out of sync between cores in the host, which then leads to bad things happening such as hangs and spurious watchdog timeouts. To fix this, we add a new field 'tb_offset_applied' to the vcore struct which stores the offset that is currently applied to the timebase. This value is set from the vcore tb_offset field on guest entry, and is what is subtracted from the timebase on guest exit. Since it is zero when the timebase offset is not applied, we can simplify the logic in kvmhv_start_timing and kvmhv_accumulate_time. In addition, we had secondary threads reading the timebase while running concurrently with code on the primary thread which would eventually add or subtract the timebase offset from the timebase. This occurred while saving or restoring the DEC register value on the secondary threads. Although no specific incorrect behaviour has been observed, this is a race which should be fixed. To fix it, we move the DEC saving code to just before we call kvmhv_commence_exit, and the DEC restoring code to after the point where we have waited for the primary thread to switch the MMU context and add the timebase offset. That way we are sure that the timebase contains the guest timebase value in both cases. Signed-off-by: Paul Mackerras <[email protected]>
2018-05-17powerpc/kvm: Prefer fault_in_pages_readable functionMathieu Malaterre1-2/+2
Directly use fault_in_pages_readable instead of manual __get_user code. Fix warning treated as error with W=1: arch/powerpc/kernel/kvm.c:675:6: error: variable ‘tmp’ set but not used [-Werror=unused-but-set-variable] Suggested-by: Christophe Leroy <[email protected]> Signed-off-by: Mathieu Malaterre <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-05-17powerpc/mm/radix: implement LPID based TLB flushes to be used by KVMNicholas Piggin2-0/+214
Implement a local TLB flush for invalidating an LPID with variants for process or partition scope. And a global TLB flush for invalidating a partition scoped page of an LPID. These will be used by KVM in subsequent patches. Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-05-15powerpc/kvm: Switch kvm pmd allocator to custom allocatorAneesh Kumar K.V1-5/+31
In the next set of patches, we will switch pmd allocator to use page fragments and the locking will be updated to split pmd ptlock. We want to avoid using fragments for partition-scoped table. Use slab cache similar to level 4 table Signed-off-by: Aneesh Kumar K.V <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-05-06Linux 4.17-rc4Linus Torvalds1-2/+2
2018-05-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-85/+122
Pll KVM fixes from Radim Krčmář: "ARM: - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation x86: - Speed up injection of expired timers (for stable)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove APIC Timer periodic/oneshot spikes arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
2018-05-06Merge tag 'iommu-fixes-v4.17-rc4' of ↵Linus Torvalds5-34/+37
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - fix a compile warning in the AMD IOMMU driver with irq remapping disabled - fix for VT-d interrupt remapping and invalidation size (caused a BUG_ON when trying to invalidate more than 4GB) - build fix and a regression fix for broken graphics with old DTS for the rockchip iommu driver - a revert in the PCI window reservation code which fixes a regression with VFIO. * tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: rockchip: fix building without CONFIG_OF iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb() iommu/vt-d: fix shift-out-of-bounds in bug checking iommu/dma: Move PCI window region reservation back into dma specific path. iommu/rockchip: Make clock handling optional iommu/amd: Hide unused iommu_table_lock iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
2018-05-06Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when the evaluation of physical and virtual bits which uses the same CPUID leaf was moved out of get_cpu_cap()" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Restore CPUID_8000_0008_EBX reload
2018-05-06Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-30/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource fixes from Thomas Gleixner: "The recent addition of the early TSC clocksource breaks on machines which have an unstable TSC because in case that TSC is disabled, then the clocksource selection logic falls back to the early TSC which is obviously bogus. That also unearthed a few robustness issues in the clocksource derating code which are addressed as well" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Rework stale comment clocksource: Consistent de-rate when marking unstable x86/tsc: Fix mark_tsc_unstable() clocksource: Initialize cs->wd_list clocksource: Allow clocksource_mark_unstable() on unregistered clocksources x86/tsc: Always unregister clocksource_tsc_early
2018-05-06Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single fix to prevent false positives in the spurious interrupt detector when more than a single demultiplex register is evaluated in the Qualcom irq combiner driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/qcom: Fix check for spurious interrupts
2018-05-05Merge tag 'platform-drivers-x86-v4.17-2' of ↵Linus Torvalds2-2/+4
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: - We missed a case in the Dell config dependencies resulting in a possible bad configuration, resolve it by giving up on trying to keep DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS. - Fix a null pointer dereference at module unload for the asus-wireless driver. * tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference
2018-05-05Merge tag 'usb-4.17-rc4' of ↵Linus Torvalds17-58/+133
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB driver fixes for 4.17-rc4. The majority of them are some USB gadget fixes that missed my last pull request. The "largest" patch in here is a fix for the old visor driver that syzbot found 6 months or so ago and I finally remembered to fix it. All of these have been in linux-next with no reported issues" * tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "usb: host: ehci: Use dma_pool_zalloc()" usb: typec: tps6598x: handle block reads separately with plain-I2C adapters usb: typec: tcpm: Release the role mux when exiting USB: Accept bulk endpoints with 1024-byte maxpacket xhci: Fix use-after-free in xhci_free_virt_device USB: serial: visor: handle potential invalid device configuration USB: serial: option: adding support for ublox R410M usb: musb: trace: fix NULL pointer dereference in musb_g_tx() usb: musb: host: fix potential NULL pointer dereference usb: gadget: composite Allow for larger configuration descriptors usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static usb: dwc2: pci: Fix error return code in dwc2_pci_probe() usb: dwc2: WA for Full speed ISOC IN in DDMA mode. usb: dwc2: dwc2_vbus_supply_init: fix error check usb: gadget: f_phonet: fix pn_net_xmit()'s return type
2018-05-05KVM: x86: remove APIC Timer periodic/oneshot spikesAnthoine Bourgeois1-17/+20
Since the commit "8003c9ae204e: add APIC Timer periodic/oneshot mode VMX preemption timer support", a Windows 10 guest has some erratic timer spikes. Here the results on a 150000 times 1ms timer without any load: Before 8003c9ae204e | After 8003c9ae204e Max 1834us | 86000us Mean 1100us | 1021us Deviation 59us | 149us Here the results on a 150000 times 1ms timer with a cpu-z stress test: Before 8003c9ae204e | After 8003c9ae204e Max 32000us | 140000us Mean 1006us | 1997us Deviation 140us | 11095us The root cause of the problem is starting hrtimer with an expiry time already in the past can take more than 20 milliseconds to trigger the timer function. It can be solved by forward such past timers immediately, rather than submitting them to hrtimer_start(). In case the timer is periodic, update the target expiration and call hrtimer_start with it. v2: Check if the tsc deadline is already expired. Thank you Mika. v3: Execute the past timers immediately rather than submitting them to hrtimer_start(). v4: Rearm the periodic timer with advance_periodic_target_expiration() a simpler version of set_target_expiration(). Thank you Paolo. Cc: Mika Penttilä <[email protected]> Cc: Wanpeng Li <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: [email protected] Signed-off-by: Anthoine Bourgeois <[email protected]> 8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support") Signed-off-by: Radim Krčmář <[email protected]>
2018-05-05Merge tag 'kvmarm-fixes-for-4.17-2' of ↵Radim Krčmář9-68/+102
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/arm fixes for 4.17, take #2 - Fix proxying of GICv2 CPU interface accesses - Fix crash when switching to BE - Track source vcpu git GICv2 SGIs - Fix an outdated bit of documentation
2018-05-04Merge tag 'kbuild-fixes-v4.17' of ↵Linus Torvalds5-13/+8
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - remove state comment in modpost - extend MAINTAINERS entry to cover modpost and more makefiles - fix missed building of SANCOV gcc-plugin - replace left-over 'bison' with $(YACC) - display short log when generating parer of genksyms * tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: genksyms: fix typo in parse.tab.{c,h} generation rules kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) gcc-plugins: fix build condition of SANCOV plugin MAINTAINERS: Update Kbuild entry with a few paths modpost: delete stale comment
2018-05-04Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds9-43/+55
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes froom Stephen Boyd: "A handful of fixes for the stm32mp1 clk driver came in during the merge window for the driver that got merged in the merge window. Plus a warning fix for unused PM ops and a couple fixes for the meson clk driver clk names that went unnoticed with the regmap rework. There's also another fix in here for the mux rounding flag which wasn't doing what it said it did, but now it does" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux clk: cs2000: mark resume function as __maybe_unused clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static
2018-05-04Merge tag 'rproc-v4.17-1' of git://github.com/andersson/remoteprocLinus Torvalds4-3/+7
Pull remoteproc and rpmsg fixes from Bjorn Andersson: - fix screw-up when reversing boolean for rproc_stop() - add missing OF node refcounting dereferences - add missing MODULE_ALIAS in rpmsg_char * tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc: rpmsg: added MODULE_ALIAS for rpmsg_char remoteproc: qcom: Fix potential device node leaks remoteproc: fix crashed parameter logic on stop call
2018-05-04Merge tag 'drm-fixes-for-v4.17-rc4' of ↵Linus Torvalds5-26/+70
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "vmwgfx, i915, vc4, vga dac fixes. This seems eerily quiet, so I expect it will explode next week or something. One i915 model firmware, two vmwgfx fixes, one vc4 fix and one bridge leak fix" * tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux: drm/bridge: vga-dac: Fix edid memory leak drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced drm/i915/glk: Add MODULE_FIRMWARE for Geminilake drm/vmwgfx: Fix a buffer object leak drm/vmwgfx: Clean up fbdev modeset locking
2018-05-04Merge tag 'trace-v4.17-rc1-3' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Some of the files in the tracing directory show file mode 0444 when they are writable by root. To fix the confusion, they should be 0644. Note, either case root can still write to them. Zhengyuan asked why I never applied that patch (the first one is from 2014!). I simply forgot about it. /me lowers head in shame" * tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix the file mode of stack tracer ftrace: Have set_graph_* files have normal file modes
2018-05-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds63-208/+407
Pull rdma fixes from Doug Ledford: "This is our first pull request of the rc cycle. It's not that it's been overly quiet, we were just waiting on a few things before sending this off. For instance, the 6 patch series from Intel for the hfi1 driver had actually been pulled in on Tuesday for a Wednesday pull request, only to have Jason notice something I missed, so we held off for some testing, and then on Thursday had to respin the series because the very first patch needed a minor fix (unnecessary cast is all). There is a sizable hns patch series in here, as well as a reasonably largish hfi1 patch series, then all of the lines of uapi updates are just the change to the new official Linux-OpenIB SPDX tag (a bunch of our files had what amounts to a BSD-2-Clause + MIT Warranty statement as their license as a result of the initial code submission years ago, and the SPDX folks decided it was unique enough to warrant a unique tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4 and core/cache/cma updates to round out the bunch. None of it was overly large by itself, but in the 2 1/2 weeks we've been collecting patches, it has added up :-/. As best I can tell, it's been through 0day (I got a notice about my last for-next push, but not for my for-rc push, but Jason seems to think that failure messages are prioritized and success messages not so much). It's also been through linux-next. And yes, we did notice in the context portion of the CMA query gid fix patch that there is a dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage and remove it anywhere we can. Summary: - Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off) - SPDX license tag cleanups (new tag Linux-OpenIB) - RoCE GID fixes related to default GIDs - Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch), mlx4, mlx5, and hfi1 (medium batch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits) RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used IB/hfi1: Fix loss of BECN with AHG IB/hfi1 Use correct type for num_user_context IB/hfi1: Fix handling of FECN marked multicast packet IB/core: Make ib_mad_client_id atomic iw_cxgb4: Atomically flush per QP HW CQEs IB/uverbs: Fix kernel crash during MR deregistration flow IB/uverbs: Prevent reregistration of DM_MR to regular MR RDMA/mlx4: Add missed RSS hash inner header flag RDMA/hns: Fix a couple misspellings RDMA/hns: Submit bad wr RDMA/hns: Update assignment method for owner field of send wqe RDMA/hns: Adjust the order of cleanup hem table RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set RDMA/hns: Remove some unnecessary attr_mask judgement RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set ...
2018-05-04Merge tag 'for-linus-20180504' of git://git.kernel.dk/linux-blockLinus Torvalds20-82/+189
Pull block fixes from Jens Axboe: "A collection of fixes that should to into this release. This contains: - Set of bcache fixes from Coly, fixing regression in patches that went into this series. - Set of NVMe fixes by way of Keith. - Set of bdi related fixes, one from Jan and two from Tetsuo Handa, fixing various issues around device addition/removal. - Two block inflight fixes from Omar, fixing issues around the transition to using tags for blk-mq inflight accounting that we did a few releases ago" * tag 'for-linus-20180504' of git://git.kernel.dk/linux-block: bdi: Fix oops in wb_workfn() nvmet: switch loopback target state to connecting when resetting nvme/multipath: Fix multipath disabled naming collisions nvme/multipath: Disable runtime writable enabling parameter nvme: Set integrity flag for user passthrough commands nvme: fix potential memory leak in option parsing bdi: Fix use after free bug in debugfs_remove() bdi: wake up concurrent wb_shutdown() callers. bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set bcache: set dc->io_disable to true in conditional_stop_bcache_device() bcache: add wait_for_kthread_stop() in bch_allocator_thread() bcache: count backing device I/O error for writeback I/O bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error() bcache: store disk name in struct cache and struct cached_dev blk-mq: fix sysfs inflight counter blk-mq: count allocated but not started requests in iostats inflight
2018-05-04Merge tag 'xfs-4.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-0/+10
Pull xfs fixes from Darrick Wong: "I've got one more bug fix for xfs for 4.17-rc4, which caps the amount of data we try to handle in one dedupe request so that userspace can't livelock the kernel. This series has been run through a full xfstests run during the week and through a quick xfstests run against this morning's master, with no ajor failures reported. Summary: - Cap the maximum length of a deduplication request at MAX_RW_COUNT/2 to avoid kernel livelock due to excessively large IO requests" * tag 'xfs-4.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: cap the length of deduplication requests
2018-05-04Merge tag 'for-4.17-rc3-tag' of ↵Linus Torvalds3-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two regression fixes and one fix for stable" * tag 'for-4.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: send, fix missing truncate for inode with prealloc extent past eof btrfs: Take trans lock before access running trans in check_delayed_ref btrfs: Fix wrong first_key parameter in replace_path
2018-05-05genksyms: fix typo in parse.tab.{c,h} generation rulesMauro Rossi1-2/+2
'quet' is replaced by 'quiet' in scripts/genksyms/Makefile Signed-off-by: Mauro Rossi <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-05-05kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)Masahiro Yamada1-1/+1
Commit 73a4f6dbe70a ("kbuild: add LEX and YACC variables") missed to update cmd_bison_h somehow. Signed-off-by: Masahiro Yamada <[email protected]>
2018-05-05gcc-plugins: fix build condition of SANCOV pluginMasahiro Yamada1-1/+1
Since commit d677a4d60193 ("Makefile: support flag -fsanitizer-coverage=trace-cmp"), you miss to build the SANCOV plugin under some circumstances. CONFIG_KCOV=y CONFIG_KCOV_ENABLE_COMPARISONS=y Your compiler does not support -fsanitize-coverage=trace-pc Your compiler does not support -fsanitize-coverage=trace-cmp Under this condition, $(CFLAGS_KCOV) is not empty but contains a space, so the following ifeq-conditional is false. ifeq ($(CFLAGS_KCOV),) Then, scripts/Makefile.gcc-plugins misses to add sancov_plugin.so to gcc-plugin-y while the SANCOV plugin is necessary as an alternative means. Fixes: d677a4d60193 ("Makefile: support flag -fsanitizer-coverage=trace-cmp") Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Kees Cook <[email protected]>
2018-05-05MAINTAINERS: Update Kbuild entry with a few pathsRasmus Villemoes1-1/+3
I managed to send some modpost patches to old addresses of both Masahiro and Michal, and omitted linux-kbuild from cc, because my tried and trusted scripts/get_maintainer wrapper failed me. Add the modpost directory to the MAINTAINERS entry, and while at it make the Makefile glob match scripts/Makefile itself, and add one matching the Kbuild.include file as well. Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-05-04Merge tag 'usb-serial-4.17-rc4' of ↵Greg Kroah-Hartman2-34/+40
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.17-rc4 Here's a fix for a long-standing issue in the visor driver, which could have security implications. Included is also a new modem device id. Both commits have been in linux-next for a couple of days with no reported issues. Signed-off-by: Johan Hovold <[email protected]>
2018-05-04Revert "usb: host: ehci: Use dma_pool_zalloc()"Greg Kroah-Hartman2-3/+6
This reverts commit 22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is broken. Alan writes: What you can't see just from reading the patch is that in both cases (ehci->itd_pool and ehci->sitd_pool) there are two allocation paths -- the two branches of an "if" statement -- and only one of the paths calls dma_pool_[z]alloc. However, the memset is needed for both paths, and so it can't be eliminated. Given that it must be present, there's no advantage to calling dma_pool_zalloc rather than dma_pool_alloc. Reported-by: Erick Cafferata <[email protected]> Cc: Alan Stern <[email protected]> Cc: Souptick Joarder <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-05-04platform/x86: Kconfig: Fix dell-laptop dependency chain.Mario Limonciello1-1/+1
As reported by Randy Dunlap: >> WARNING: unmet direct dependencies detected for DELL_SMBIOS >> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && (DCDBAS [=m] || >> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n) >> Selected by [y]: >> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] >> && DMI [=y] >> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] || >> ACPI_VIDEO [=n]=n) >> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y] >> Right now it's possible to set dell laptop to compile in but this causes dell-smbios to compile in which breaks if dcdbas is a module. Dell laptop shouldn't select dell-smbios anymore, but depend on it. Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS) Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Cc: [email protected] Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-05-04platform/x86: asus-wireless: Fix NULL pointer dereferenceJoão Paulo Rechi Vita1-1/+3
When the module is removed the led workqueue is destroyed in the remove callback, before the led device is unregistered from the led subsystem. This leads to a NULL pointer derefence when the led device is unregistered automatically later as part of the module removal cleanup. Bellow is the backtrace showing the problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: __queue_work+0x8c/0x410 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015 RIP: 0010:__queue_work+0x8c/0x410 RSP: 0018:ffffbe8cc249fcd8 EFLAGS: 00010086 RAX: ffff992ac6810800 RBX: 0000000000000000 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff992ac6400e18 RBP: ffffbe8cc249fd18 R08: ffff992ac6400db0 R09: 0000000000000000 R10: 0000000000000040 R11: ffff992ac6400dd8 R12: 0000000000002000 R13: ffff992abd762e00 R14: ffff992abd763e38 R15: 000000000001ebe0 FS: 00007f318203e700(0000) GS:ffff992aced80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001c720e000 CR4: 00000000001406e0 Call Trace: queue_work_on+0x38/0x40 led_state_set+0x2c/0x40 [asus_wireless] led_set_brightness_nopm+0x14/0x40 led_set_brightness+0x37/0x60 led_trigger_set+0xfc/0x1d0 led_classdev_unregister+0x32/0xd0 devm_led_classdev_release+0x11/0x20 release_nodes+0x109/0x1f0 devres_release_all+0x3c/0x50 device_release_driver_internal+0x16d/0x220 driver_detach+0x3f/0x80 bus_remove_driver+0x55/0xd0 driver_unregister+0x2c/0x40 acpi_bus_unregister_driver+0x15/0x20 asus_wireless_driver_exit+0x10/0xb7c [asus_wireless] SyS_delete_module+0x1da/0x2b0 entry_SYSCALL_64_fastpath+0x24/0x87 RIP: 0033:0x7f3181b65fd7 RSP: 002b:00007ffe74bcbe18 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3181b65fd7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555ea2559258 RBP: 0000555ea25591f0 R08: 00007ffe74bcad91 R09: 000000000000000a R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000003 R13: 00007ffe74bcae00 R14: 0000000000000000 R15: 0000555ea25591f0 Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7 RIP: __queue_work+0x8c/0x410 RSP: ffffbe8cc249fcd8 CR2: 0000000000000000 ---[ end trace 7aa4f4a232e9c39c ]--- Unregistering the led device on the remove callback before destroying the workqueue avoids this problem. https://bugzilla.kernel.org/show_bug.cgi?id=196097 Reported-by: Dun Hum <[email protected]> Cc: [email protected] Signed-off-by: João Paulo Rechi Vita <[email protected]> Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-05-04Merge tag 'for-linus-4.17-rc4-tag' of ↵Linus Torvalds1-55/+31
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen cleanup from Juergen Gross: "One cleanup to remove VLAs from the kernel" * tag 'for-linus-4.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Remove use of VLAs
2018-05-04arm64: vgic-v2: Fix proxying of cpuif accessJames Morse1-5/+19
Proxying the cpuif accesses at EL2 makes use of vcpu_data_guest_to_host and co, which check the endianness, which call into vcpu_read_sys_reg... which isn't mapped at EL2 (it was inlined before, and got moved OoL with the VHE optimizations). The result is of course a nice panic. Let's add some specialized cruft to keep the broken platforms that require this hack alive. But, this code used vcpu_data_guest_to_host(), which expected us to write the value to host memory, instead we have trapped the guest's read or write to an mmio-device, and are about to replay it using the host's readl()/writel() which also perform swabbing based on the host endianness. This goes wrong when both host and guest are big-endian, as readl()/writel() will undo the guest's swabbing, causing the big-endian value to be written to device-memory. What needs doing? A big-endian guest will have pre-swabbed data before storing, undo this. If its necessary for the host, writel() will re-swab it. For a read a big-endian guest expects to swab the data after the load. The hosts's readl() will correct for host endianness, giving us the device-memory's value in the register. For a big-endian guest, swab it as if we'd only done the load. For a little-endian guest, nothing needs doing as readl()/writel() leave the correct device-memory value in registers. Tested on Juno with that rarest of things: a big-endian 64K host. Based on a patch from Marc Zyngier. Reported-by: Suzuki K Poulose <[email protected]> Fixes: bf8feb39642b ("arm64: KVM: vgic-v2: Add GICV access from HYP") Signed-off-by: James Morse <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2018-05-04KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenanceValentin Schneider1-1/+1
One comment still mentioned process_maintenance operations after commit af0614991ab6 ("KVM: arm/arm64: vgic: Get rid of unnecessary process_maintenance operation") Update the comment to point to vgic_fold_lr_state instead, which is where maintenance interrupts are taken care of. Acked-by: Christoffer Dall <[email protected]> Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.