| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Remove superfluous close zone in resp_open_zone()
scsi: libcxgbi: Fix a use after free in cxgbi_conn_xmit_pdu()
scsi: qedf: Fix null ptr reference in qedf_stag_change_work
|
|
The dm-integrity target did not report errors in bitmap mode just after
creation. The reason is that the function integrity_recalc didn't clean up
ic->recalc_bitmap as it proceeded with recalculation.
Fix this by updating the bitmap accordingly -- the double shift serves
to rounddown.
Signed-off-by: Mikulas Patocka <[email protected]>
Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode")
Cc: [email protected] # v5.2+
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto
wait structures declared on stack before their use with
crypto_wait_req().
Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation")
Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
changed flush_multipath_work() to avoid needless workqueue
flushing (of a multipath global workqueue). But that change didn't
realize the surrounding flush_multipath_work() code should also only
run if 'pg_init_in_progress' is set.
Fix this by only doing all of flush_multipath_work()'s PG init related
work if 'pg_init_in_progress' is set.
Otherwise multipath_wait_for_pg_init_completion() will run
unconditionally but the preceeding flush_workqueue(kmpath_handlerd)
may not. This could lead to deadlock (though only if kmpath_handlerd
never runs a corresponding work to decrement 'pg_init_in_progress').
It could also be, though highly unlikely, that the kmpath_handlerd
work that does PG init completes before 'pg_init_in_progress' is set,
and then an intervening DM table reload's multipath_postsuspend()
triggers flush_multipath_work().
Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed")
Cc: [email protected]
Reported-by: Ben Marzinski <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
The function dax_direct_access doesn't take partitions into account,
it always maps pages from the beginning of the device. Therefore,
persistent_memory_claim() must get the partition offset using
get_start_sect() and add it to the page offsets passed to
dax_direct_access().
Signed-off-by: Mikulas Patocka <[email protected]>
Fixes: 48debafe4f2f ("dm: add writecache target")
Cc: [email protected] # 4.18+
Signed-off-by: Mike Snitzer <[email protected]>
|
|
On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a
max_order of 31 will be passed to mlx_buddy_init(), which results in
s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to
kvmalloc_array() failure when it is converted to size_t.
mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting
mlx4_core: probe of 0000:b1:00.0 failed with error -12
Fix this issue by changing the left shifting operand from a signed literal to
an unsigned one.
Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Signed-off-by: Shung-Hsi Yu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <[email protected]>
Signed-off-by: Francisco Jerez <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When intel_pstate switches the operation mode from "active" to
"passive" or the other way around, freeing its data structures
representing CPUs and allocating them again from scratch is not
necessary and wasteful. Moreover, if these data structures are
preserved, the cached HWP Request MSR value from there may be
written to the MSR to start with to reinitialize it and help to
restore the EPP value set previously (it is set to 0xFF when CPUs
go offline to allow their SMT siblings to use the full range of
EPP values and that also happens when the driver gets unregistered).
Accordingly, modify the driver to only do a full cleanup on driver
object registration errors and when its status is changed to "off"
via sysfs and to write the cached HWP Request MSR value back to
the MSR on CPU init if the data structure representing the given
CPU is still there.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
|
|
Add ->offline and ->online driver callbacks to prepare for taking a
CPU offline and to restore its working configuration when it goes
back online, respectively, to avoid invoking the ->init callback on
every CPU online which is quite a bit of unnecessary overhead.
Define ->offline and ->online so that they can be used in the
passive mode as well as in the active mode and because ->offline
will do the majority of ->stop_cpu work, the passive mode does
not need that callback any more, so drop it from there.
Also modify the active mode ->suspend and ->resume callbacks to
prevent them from interfering with the new ->offline and ->online
ones in case the latter are invoked withing the system-wide suspend
and resume code flow and make the passive mode use them too.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
|
|
Modify the EPP sysfs interface to reject attempts to change the EPP
to values different from 0 ("performance") in the active mode with
the "performance" policy (ie. scaling_governor set to "performance"),
to avoid situations in which the kernel appears to discard data
passed to it via the EPP sysfs attribute.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Artem Bityutskiy <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
|
|
Make intel_pstate update the cached EPP value when setting the EPP
via sysfs in the active mode just like it is the case in the passive
mode, for consistency, but also for the benefit of subsequent
changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
|
|
After commit f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive
mode with HWP enabled") it is possible to change the driver status
to "off" via sysfs with HWP enabled, which effectively causes the
driver to unregister itself, but HWP remains active and it forces the
minimum performance, so even if another cpufreq driver is loaded,
it will not be able to control the CPU frequency.
For this reason, make the driver refuse to change the status to
"off" with HWP enabled.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
|
|
Error on calling kthread_create_on_node prints wrong function name,
kernel_thread.
Fixes: 94dcf29a11b3 ("kthread: use kthread_create_on_node()")
Signed-off-by: Leesoo Ahn <[email protected]>
Acked-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.9-rc4 from
Viresh Kumar:
"This fixes reference counting for OPP tables. Few patches are getting
queued (for various subsystems) for 5.10 which depend on this to be
fixed first."
* 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't drop reference for an OPP table that was never parsed
|
|
Fix min_low_pfn/max_low_pfn build errors for arch/ia64/: (e.g.)
ERROR: "max_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
ERROR: "min_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
ERROR: "max_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
ERROR: "min_low_pfn" [drivers/crypto/cavium/nitrox/n5pf.ko] undefined!
ERROR: "max_low_pfn" [drivers/crypto/cavium/nitrox/n5pf.ko] undefined!
ERROR: "max_low_pfn" [drivers/md/dm-integrity.ko] undefined!
ERROR: "min_low_pfn" [drivers/md/dm-integrity.ko] undefined!
ERROR: "max_low_pfn" [crypto/tcrypt.ko] undefined!
ERROR: "min_low_pfn" [crypto/tcrypt.ko] undefined!
ERROR: "min_low_pfn" [security/keys/encrypted-keys/encrypted-keys.ko] undefined!
ERROR: "max_low_pfn" [security/keys/encrypted-keys/encrypted-keys.ko] undefined!
ERROR: "min_low_pfn" [arch/ia64/kernel/mca_recovery.ko] undefined!
ERROR: "max_low_pfn" [arch/ia64/kernel/mca_recovery.ko] undefined!
David suggested just exporting min_low_pfn & max_low_pfn in
mm/memblock.c:
https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2006291911220.1118534@chino.kir.corp.google.com/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: David Rientjes <[email protected]>
Acked-by: Tony Luck <[email protected]>
Cc: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: [email protected]
Signed-off-by: Mike Rapoport <[email protected]>
|
|
Disable ordered_events for report raw dump, because for raw dump we want
to see events as they are stored in the perf.data file, not sorted by
time.
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
perf_event.h has macros that define the field offsets in the data_src
bitmask in perf records. The SNOOPX and REMOTE offsets were both 37.
These are distinct fields, and the bitfield layout in perf_mem_data_src
confirms that SNOOPX should be at offset 38.
Committer notes:
This was extracted from a larger patch that also contained kernel
changes.
Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings")
Signed-off-by: Al Grant <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from Intel PT were using the new
format, but not setting the event attribute, leading to consumers
seeing corrupt data. This patch fixes the issue by setting the event
attribute to indicate use of the new format.
Fixes: 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Leo Yan <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
changed the format of branch stacks in perf samples. When samples use
this new format, a flag must be set in the corresponding event.
Synthesized branch stacks generated from CoreSight ETM trace were using
the new format, but not setting the event attribute, leading to
consumers seeing corrupt data. This patch fixes the issue by setting the
event attribute to indicate use of the new format.
Fixes: 42bbabed09ce6208 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Al Grant <[email protected]>
Reviewed-by: Andrea Brunato <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: [email protected]
Signed-off-by: Leo Yan <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
For a while we need to have a dummy event for doing things like
receiving PERF_RECORD_COMM, PERF_RECORD_EXEC, etc for threads being
created and dying while we synthesize the pre-existing ones at tool
start.
This 'dummy' event is needed for keeping track of thread lifetime events
early in the session but are uninteresting otherwise, i.e. no need to
have it in a initial events menu for the non-grouped case, i.e. for:
# perf top -e cycles,instructions
or even for plain:
# perf top
When 'cycles' and that 'dummy' event are in place.
The code to remove that 'dummy' event ended up creating an endless loop
for the grouped case, i.e.:
# perf top -e '{cycles,instructions}'
Fix it.
Fixes: bee9ca1c8a237ca1 ("perf report TUI: Remove needless 'dummy' event from menu")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
With a fake_pmu the pmu_info isn't populated by perf_pmu__check_alias.
In this case, don't try to copy the uninitialized values to the evsel.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix a compile error on F32 and gcc version 10.1 on s390 in file
utils/stat-display.c. The error does not show up with make DEBUG=y. In
fact the issue shows up when using both compiler options -O6 and
-D_FORTIFY_SOURCE=2 (which are omitted with DEBUG=Y).
This is the offending call chain:
print_counter_aggr()
printout(config, -1, 0, ...) with 2nd parm id set to -1
aggr_printout(config, x, id --> -1, ...) which leads to this code:
case AGGR_NONE:
if (evsel->percore && !config->percore_show_thread) {
....
} else {
fprintf(config->output, "CPU%*d%s",
config->csv_output ? 0 : -7,
evsel__cpus(evsel)->map[id],
^^ id is -1 !!!!
config->csv_sep);
}
This is a compiler inlining issue which is detected on s390 but not on
other plattforms.
Output before:
# make util/stat-display.o
.....
util/stat-display.c: In function ‘perf_evlist__print_counters’:
util/stat-display.c:121:4: error: array subscript -1 is below array
bounds of ‘int[]’ [-Werror=array-bounds]
121 | fprintf(config->output, "CPU%*d%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
122 | config->csv_output ? 0 : -7,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
123 | evsel__cpus(evsel)->map[id],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
124 | config->csv_sep);
| ~~~~~~~~~~~~~~~~
In file included from util/evsel.h:13,
from util/evlist.h:13,
from util/stat-display.c:9:
/root/linux/tools/lib/perf/include/internal/cpumap.h:10:7:
note: while referencing ‘map’
10 | int map[];
| ^~~
cc1: all warnings being treated as errors
mv: cannot stat 'util/.stat-display.o.tmp': No such file or directory
make[3]: *** [/root/linux/tools/build/Makefile.build:97: util/stat-display.o]
Error 1
make[2]: *** [Makefile.perf:716: util/stat-display.o] Error 2
make[1]: *** [Makefile.perf:231: sub-make] Error 2
make: *** [Makefile:110: util/stat-display.o] Error 2
[root@t35lp46 perf]#
Output after:
# make util/stat-display.o
.....
CC util/stat-display.o
[root@t35lp46 perf]#
Committer notes:
Removed the removal of {} enclosing the multiline else block, as pointed
out by Jiri Olsa.
Suggested-by: Jiri Olsa <[email protected]>
Signed-off-by: Thomas Richter <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
metrics" test
Linux 5.9 introduced perf test case "Parse and process metrics" and
on s390 this test case always dumps core:
[root@t35lp67 perf]# ./perf test -vvvv -F 67
67: Parse and process metrics :
--- start ---
metric expr inst_retired.any / cpu_clk_unhalted.thread for IPC
parsing metric: inst_retired.any / cpu_clk_unhalted.thread
Segmentation fault (core dumped)
[root@t35lp67 perf]#
I debugged this core dump and gdb shows this call chain:
(gdb) where
#0 0x000003ffabc3192a in __strnlen_c_1 () from /lib64/libc.so.6
#1 0x000003ffabc293de in strcasestr () from /lib64/libc.so.6
#2 0x0000000001102ba2 in match_metric(list=0x1e6ea20 "inst_retired.any",
n=<optimized out>)
at util/metricgroup.c:368
#3 find_metric (map=<optimized out>, map=<optimized out>,
metric=0x1e6ea20 "inst_retired.any")
at util/metricgroup.c:765
#4 __resolve_metric (ids=0x0, map=<optimized out>, metric_list=0x0,
metric_no_group=<optimized out>, m=<optimized out>)
at util/metricgroup.c:844
#5 resolve_metric (ids=0x0, map=0x0, metric_list=0x0,
metric_no_group=<optimized out>)
at util/metricgroup.c:881
#6 metricgroup__add_metric (metric=<optimized out>,
metric_no_group=metric_no_group@entry=false, events=<optimized out>,
events@entry=0x3ffd84fb878, metric_list=0x0,
metric_list@entry=0x3ffd84fb868, map=0x0)
at util/metricgroup.c:943
#7 0x00000000011034ae in metricgroup__add_metric_list (map=0x13f9828 <map>,
metric_list=0x3ffd84fb868, events=0x3ffd84fb878,
metric_no_group=<optimized out>, list=<optimized out>)
at util/metricgroup.c:988
#8 parse_groups (perf_evlist=perf_evlist@entry=0x1e70260,
str=str@entry=0x12f34b2 "IPC", metric_no_group=<optimized out>,
metric_no_merge=<optimized out>,
fake_pmu=fake_pmu@entry=0x1462f18 <perf_pmu.fake>,
metric_events=0x3ffd84fba58, map=0x1)
at util/metricgroup.c:1040
#9 0x0000000001103eb2 in metricgroup__parse_groups_test(
evlist=evlist@entry=0x1e70260, map=map@entry=0x13f9828 <map>,
str=str@entry=0x12f34b2 "IPC",
metric_no_group=metric_no_group@entry=false,
metric_no_merge=metric_no_merge@entry=false,
metric_events=0x3ffd84fba58)
at util/metricgroup.c:1082
#10 0x00000000010c84d8 in __compute_metric (ratio2=0x0, name2=0x0,
ratio1=<synthetic pointer>, name1=0x12f34b2 "IPC",
vals=0x3ffd84fbad8, name=0x12f34b2 "IPC")
at tests/parse-metric.c:159
#11 compute_metric (ratio=<synthetic pointer>, vals=0x3ffd84fbad8,
name=0x12f34b2 "IPC")
at tests/parse-metric.c:189
#12 test_ipc () at tests/parse-metric.c:208
.....
..... omitted many more lines
This test case was added with
commit 218ca91df477 ("perf tests: Add parse metric test for frontend metric").
When I compile with make DEBUG=y it works fine and I do not get a core dump.
It turned out that the above listed function call chain worked on a struct
pmu_event array which requires a trailing element with zeroes which was
missing. The marco map_for_each_event() loops over that array tests for members
metric_expr/metric_name/metric_group being non-NULL. Adding this element fixes
the issue.
Output after:
[root@t35lp46 perf]# ./perf test 67
67: Parse and process metrics : Ok
[root@t35lp46 perf]#
Committer notes:
As Ian remarks, this is not s390 specific:
<quote Ian>
This also shows up with address sanitizer on all architectures
(perhaps change the patch title) and perhaps add a "Fixes: <commit>"
tag.
=================================================================
==4718==ERROR: AddressSanitizer: global-buffer-overflow on address
0x55c93b4d59e8 at pc 0x55c93a1541e2 bp 0x7ffd24327c60 sp
0x7ffd24327c58
READ of size 8 at 0x55c93b4d59e8 thread T0
#0 0x55c93a1541e1 in find_metric tools/perf/util/metricgroup.c:764:2
#1 0x55c93a153e6c in __resolve_metric tools/perf/util/metricgroup.c:844:9
#2 0x55c93a152f18 in resolve_metric tools/perf/util/metricgroup.c:881:9
#3 0x55c93a1528db in metricgroup__add_metric
tools/perf/util/metricgroup.c:943:9
#4 0x55c93a151996 in metricgroup__add_metric_list
tools/perf/util/metricgroup.c:988:9
#5 0x55c93a1511b9 in parse_groups tools/perf/util/metricgroup.c:1040:8
#6 0x55c93a1513e1 in metricgroup__parse_groups_test
tools/perf/util/metricgroup.c:1082:9
#7 0x55c93a0108ae in __compute_metric tools/perf/tests/parse-metric.c:159:8
#8 0x55c93a010744 in compute_metric tools/perf/tests/parse-metric.c:189:9
#9 0x55c93a00f5ee in test_ipc tools/perf/tests/parse-metric.c:208:2
#10 0x55c93a00f1e8 in test__parse_metric
tools/perf/tests/parse-metric.c:345:2
#11 0x55c939fd7202 in run_test tools/perf/tests/builtin-test.c:410:9
#12 0x55c939fd6736 in test_and_print tools/perf/tests/builtin-test.c:440:9
#13 0x55c939fd58c3 in __cmd_test tools/perf/tests/builtin-test.c:661:4
#14 0x55c939fd4e02 in cmd_test tools/perf/tests/builtin-test.c:807:9
#15 0x55c939e4763d in run_builtin tools/perf/perf.c:313:11
#16 0x55c939e46475 in handle_internal_command tools/perf/perf.c:365:8
#17 0x55c939e4737e in run_argv tools/perf/perf.c:409:2
#18 0x55c939e45f7e in main tools/perf/perf.c:539:3
0x55c93b4d59e8 is located 0 bytes to the right of global variable
'pme_test' defined in 'tools/perf/tests/parse-metric.c:17:25'
(0x55c93b4d54a0) of size 1352
SUMMARY: AddressSanitizer: global-buffer-overflow
tools/perf/util/metricgroup.c:764:2 in find_metric
Shadow bytes around the buggy address:
0x0ab9a7692ae0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ab9a7692af0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ab9a7692b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ab9a7692b10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ab9a7692b20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x0ab9a7692b30: 00 00 00 00 00 00 00 00 00 00 00 00 00[f9]f9 f9
0x0ab9a7692b40: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
0x0ab9a7692b50: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
0x0ab9a7692b60: f9 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 00 00
0x0ab9a7692b70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0ab9a7692b80: f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9 f9
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
Shadow gap: cc
</quote>
I'm also adding the missing "Fixes" tag and setting just .name to NULL,
as doing it that way is more compact (the compiler will zero out
everything else) and the table iterators look for .name being NULL as
the sentinel marking the end of the table.
Fixes: 0a507af9c681ac2a ("perf tests: Add parse metric test for ipc metric")
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Sumanth Korikkar <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently if we run 'perf record -e cycles:u', exclude_guest=0.
But it doesn't make sense in most cases that we request for
user-space counting but we also get the guest report.
Of course, we also need to consider 'perf kvm' usage case that
authorized perf users on the host may only want to count guest user
space events. For example,
# perf kvm --guest record -e cycles:u
When we have 'exclude_guest=1' for 'perf kvm' usage, we may get nothing
from guest events.
To keep perf semantics consistent and clear, this patch sets
exclude_guest=1 for user-space counting but except for 'perf kvm' usage.
Before:
perf record -e cycles:u ./div
perf evlist -v
cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, ...
After:
perf record -e cycles:u ./div
perf evlist -v
cycles:u: ..., exclude_kernel: 1, exclude_hv: 1, exclude_guest: 1, ...
Before:
perf kvm --guest record -e cycles:u -vvv
perf_event_attr:
size 120
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
freq 1
sample_id_all 1
After:
perf kvm --guest record -e cycles:u -vvv
perf_event_attr:
size 120
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|ID|CPU|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
exclude_hv 1
freq 1
sample_id_all 1
For Before/After, exclude_guest are both 0 for perf kvm usage.
perf test 6
6: Parse event definition strings : Ok
Signed-off-by: Jin Yao <[email protected]>
Tested-by: Like Xu <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The help info of option "--no-bpf-event" is wrongly described as "record
bpf events", correct it.
Committer testing:
$ perf record -h bpf
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--clang-opt <clang options>
options passed to clang when compiling BPF scriptlets
--clang-path <clang path>
clang binary to use for compiling BPF scriptlets
--no-bpf-event do not record bpf events
$
Fixes: 71184c6ab7e6 ("perf record: Replace option --bpf-event with --no-bpf-event")
Signed-off-by: Wei Li <[email protected]>
Acked-by: Song Liu <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Hanjun Guo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Li Bin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
A couple of trivial fixes for using %zd for size_t in the code
supporting the ZSTD compression library.
Signed-off-by: Chris Wilson <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexey Budankov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We need to hold the whole device bd_mutex to protect against
other thread concurrently deleting out partition before we get
to it, and thus causing a use after free.
Fixes: cddae808aeb7 ("block: pass a hd_struct to delete_partition")
Reported-by: [email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Commit e8c7d14ac6c3 ("block: revert back to synchronous request_queue removal")
stops to release request queue from wq context because that commit
supposed all blk_put_queue() is called in context which is allowed
to sleep. However, this assumption isn't true because we release disk's
reference in partition's percpu_ref's ->release() which doesn't allow
to sleep, because the ->release() is run via call_rcu().
Fixes this issue by moving put disk reference into hd_struct_free_work()
Fixes: e8c7d14ac6c3 ("block: revert back to synchronous request_queue removal")
Reported-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Tested-by: Ilya Dryomov <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Luis Chamberlain <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Index here is already the position of the file in fixed_file_table, we
should not use io_file_from_index() again to get it. Otherwise, the
wrong file which still in use may be released unexpectedly.
Cc: [email protected] # v5.6
Fixes: 05f3fb3c5397 ("io_uring: avoid ring quiesce for fixed file set unregister and update")
Signed-off-by: Jiufei Xue <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
If a driver leaves the limit settings as the defaults, then we don't
initialize bdi->io_pages. This means that file systems may need to
work around bdi->io_pages == 0, which is somewhat messy.
Initialize the default value just like we do for ->ra_pages.
Cc: [email protected]
Fixes: 9491ae4aade6 ("mm: don't cap request size based on read-ahead setting")
Reported-by: OGAWA Hirofumi <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The PCM OSS mulaw plugin has a check of the format of the counter part
whether it's a linear format. The check is with snd_BUG_ON() that
emits WARN_ON() when the debug config is set, and it confuses
syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for
avoiding that.
While we're at it, correct the error code to a more suitable, EINVAL.
Reported-by: [email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
According to the user's manual chapter 8.2.1 of Loongson 3A2000 CPU [1]
and 3A3000 CPU [2], we should take some event IDs such as 274, 358, 359
and 360 as valid in the check condition, otherwise they are recognized
as "not supported", fix it.
[1] http://www.loongson.cn/uploadfile/cpu/3A2000/Loongson3A2000_user2.pdf
[2] http://www.loongson.cn/uploadfile/cpu/3A3000/Loongson3A3000_3B3000user2.pdf
Fixes: e9dfbaaeef1c ("MIPS: perf: Add hardware perf events support for new Loongson-3")
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Huang Pei <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
When calling into hid_map_usage(), the passed event code is
blindly stored as is, even if it doesn't fit in the associated bitmap.
This event code can come from a variety of sources, including devices
masquerading as input devices, only a bit more "programmable".
Instead of taking the event code at face value, check that it actually
fits the corresponding bitmap, and if it doesn't:
- spit out a warning so that we know which device is acting up
- NULLify the bitmap pointer so that we catch unexpected uses
Code paths that can make use of untrusted inputs can now check
that the mapping was indeed correct and bail out if not.
Cc: [email protected]
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
It appears that a ReportSize value of zero is legal, even if a bit
non-sensical. Most of the HID code seems to handle that gracefully,
except when computing the total size in bytes. When fed as input to
memset, this leads to some funky outcomes.
Detect the corner case and correctly compute the size.
Cc: [email protected]
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
When input_mt_init_slots() fails, input should be freed
to prevent memleak. When input_register_device() fails,
we should call input_mt_destroy_slots() to free memory
allocated by input_mt_init_slots().
Signed-off-by: Dinghao Liu <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
In RMII link mode it's required to set bit 15 IFCTL_A in MAC_SL MAC_CONTROL
register to enable support for 100Mbit link speed.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.9"
* tag 'docs-5.9-3' of git://git.lwn.net/linux:
Documentation: laptops: thinkpad-acpi: fix underline length build warning
Documentation: fix typo for abituguru documentation
docs: Fix function name trailing double-()s
devices.txt: fix typo of "ubd" as "udb"
Documentation: add riscv entry in list of existing profiles
MAINTAINERS: mention documentation maintainer entry profile
Fpga: Documentation: Replace deprecated :c:func: Usage
IIO: Documentation: Replace deprecated :c:func: Usage
Documentation/locking/locktypes: fix local_locks documentation
|
|
When multiple adapters are present in the system, pci hot-removing second
adapter leads to the following warning as both the adapters registered
thermal zone device with same thermal zone name/type.
Therefore, use unique thermal zone name during thermal zone device
initialization. Also mark thermal zone dev NULL once unregistered.
[ 414.370143] ------------[ cut here ]------------
[ 414.370944] sysfs group 'power' not found for kobject 'hwmon0'
[ 414.371747] WARNING: CPU: 9 PID: 2661 at fs/sysfs/group.c:281
sysfs_remove_group+0x76/0x80
[ 414.382550] CPU: 9 PID: 2661 Comm: bash Not tainted 5.8.0-rc6+ #33
[ 414.383593] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0a 06/23/2016
[ 414.384669] RIP: 0010:sysfs_remove_group+0x76/0x80
[ 414.385738] Code: 48 89 df 5b 5d 41 5c e9 d8 b5 ff ff 48 89 df e8 60 b0 ff ff
eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 90 ae 13 bb e8 6a 27 d0 ff <0f> 0b 5b 5d
41 5c c3 0f 1f 00 0f 1f 44 00 00 48 85 f6 74 31 41 54
[ 414.388404] RSP: 0018:ffffa22bc080fcb0 EFLAGS: 00010286
[ 414.389638] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 414.390829] RDX: 0000000000000001 RSI: ffff8ee2de3e9510 RDI: ffff8ee2de3e9510
[ 414.392064] RBP: ffffffffbaef2ee0 R08: 0000000000000000 R09: 0000000000000000
[ 414.393224] R10: 0000000000000000 R11: 000000002b30006c R12: ffff8ee260720008
[ 414.394388] R13: ffff8ee25e0a40e8 R14: ffffa22bc080ff08 R15: ffff8ee2c3be5020
[ 414.395661] FS: 00007fd2a7171740(0000) GS:ffff8ee2de200000(0000)
knlGS:0000000000000000
[ 414.396825] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 414.398011] CR2: 00007f178ffe5020 CR3: 000000084c5cc003 CR4: 00000000003606e0
[ 414.399172] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 414.400352] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 414.401473] Call Trace:
[ 414.402685] device_del+0x89/0x400
[ 414.403819] device_unregister+0x16/0x60
[ 414.405024] hwmon_device_unregister+0x44/0xa0
[ 414.406112] thermal_remove_hwmon_sysfs+0x196/0x200
[ 414.407256] thermal_zone_device_unregister+0x1b5/0x1f0
[ 414.408415] cxgb4_thermal_remove+0x3c/0x4f [cxgb4]
[ 414.409668] remove_one+0x212/0x290 [cxgb4]
[ 414.410875] pci_device_remove+0x36/0xb0
[ 414.412004] device_release_driver_internal+0xe2/0x1c0
[ 414.413276] pci_stop_bus_device+0x64/0x90
[ 414.414433] pci_stop_and_remove_bus_device_locked+0x16/0x30
[ 414.415609] remove_store+0x75/0x90
[ 414.416790] kernfs_fop_write+0x114/0x1b0
[ 414.417930] vfs_write+0xcf/0x210
[ 414.419059] ksys_write+0xa7/0xe0
[ 414.420120] do_syscall_64+0x4c/0xa0
[ 414.421278] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 414.422335] RIP: 0033:0x7fd2a686afd0
[ 414.423396] Code: Bad RIP value.
[ 414.424549] RSP: 002b:00007fffc1446148 EFLAGS: 00000246 ORIG_RAX:
0000000000000001
[ 414.425638] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd2a686afd0
[ 414.426830] RDX: 0000000000000002 RSI: 00007fd2a7196000 RDI: 0000000000000001
[ 414.427927] RBP: 00007fd2a7196000 R08: 000000000000000a R09: 00007fd2a7171740
[ 414.428923] R10: 00007fd2a7171740 R11: 0000000000000246 R12: 00007fd2a6b43400
[ 414.430082] R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
[ 414.431027] irq event stamp: 76300
[ 414.435678] ---[ end trace 13865acb4d5ab00f ]---
Fixes: b18719157762 ("cxgb4: Add thermal zone support")
Signed-off-by: Potnuri Bharat Teja <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This driver didn't set hard_header_len. This patch sets hard_header_len
for it according to its header_ops->create function.
This driver's header_ops->create function (cisco_hard_header) creates
a header of (struct hdlc_header), so hard_header_len should be set to
sizeof(struct hdlc_header).
Cc: Martin Schiller <[email protected]>
Signed-off-by: Xie He <[email protected]>
Acked-by: Krzysztof Halasa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Take the tx accounting out of the work_done calculation to
prevent a possible duplicate napi_schedule call when under
high Tx stress but low Rx traffic.
Fixes: b14e4e95f9ec ("ionic: tx separate servicing")
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Fix HS400 tuning for ACPI ID AMDI0040
- Fix reset of CQHCI for Intel GLK-based controllers
- Use correct timeout clock for Tegra186/194/210
- Fix eMMC mounting on mt7622/Bpi-64
* tag 'mmc-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
sdhci: tegra: Add missing TMCLK for data timeout
arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra210 SDMMC
dt-bindings: mmc: tegra: Add tmclk for Tegra210 and later
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210
arm64: dts: mt7622: add reset node for mmc device
dt-bindings: mmc: Add missing description for clk_in/out_sd1
mmc: mediatek: add optional module reset property
mmc: dt-bindings: Add resets/reset-names for Mediatek MMC bindings
mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
mmc: sdhci-acpi: Fix HS400 tuning for AMDI0040
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Do not delete clash entries on reply, let them expire instead,
from Florian Westphal.
2) Do not report EAGAIN to nfnetlink, otherwise this enters a busy loop.
Update nfnetlink_unicast() to translate EAGAIN to ENOBUFS.
3) Remove repeated words in code comments, from Randy Dunlap.
4) Several patches for the flowtable selftests, from Fabian Frederick.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix min_low_pfn/max_low_pfn build errors for arch/microblaze/: (e.g.)
ERROR: "min_low_pfn" [drivers/rpmsg/virtio_rpmsg_bus.ko] undefined!
ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu_sink.ko] undefined!
ERROR: "min_low_pfn" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
ERROR: "min_low_pfn" [drivers/mmc/core/mmc_core.ko] undefined!
ERROR: "min_low_pfn" [drivers/md/dm-crypt.ko] undefined!
ERROR: "min_low_pfn" [drivers/net/wireless/ath/ath6kl/ath6kl_sdio.ko] undefined!
ERROR: "min_low_pfn" [crypto/tcrypt.ko] undefined!
ERROR: "min_low_pfn" [crypto/asymmetric_keys/asym_tpm.ko] undefined!
Mike had/has an alternate patch for Microblaze:
https://lore.kernel.org/lkml/[email protected]/
David suggested just exporting min_low_pfn & max_low_pfn in
mm/memblock.c:
https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2006291911220.1118534@chino.kir.corp.google.com/
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Acked-by: Michal Simek <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: [email protected]
Cc: Andrew Morton <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Michal Simek <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
|
|
While reviewing a separate patch, I noticed that the formatting of the
commands, variables, and arguments was not in a monospaced font like the
rest of the Kbuild documentation (see kbuild/kconfig.rst for an
example). This is due to a lack of "::" before indented command blocks
and single backticks instead of double backticks for inline formatting.
Add those so that the document looks nicer in an HTML format, while not
ruining the look in plain text.
As a result of this, we can remove the escaped backslashes in the last
code block and move them to single backslashes.
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
The basic permission bits (protection bits in AmigaOS) have been broken
in Linux' AFFS - it would only set bits, but never delete them.
Also, contrary to the documentation, the Archived bit was not handled.
Let's fix this for good, and set the bits such that Linux and classic
AmigaOS can coexist in the most peaceful manner.
Also, update the documentation to represent the current state of things.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: [email protected]
Signed-off-by: Max Staudt <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
dev_pm_opp_remove_table() should drop a reference to the OPP table only
if the DT OPP table was parsed earlier with a call to
dev_pm_opp_of_add_table() earlier. Else it may end up dropping the
reference to the OPP table, which was added as a result of other calls
like dev_pm_opp_set_clkname(). And would hence result in undesirable
behavior later on when caller would try to free the resource again.
Fixes: 03758d60265c ("opp: Replace list_kref with a local counter")
Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Anders Roxell <[email protected]>
Tested-by: Naresh Kamboju <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
|
|
When operating in XInput mode, the 8bitdo SN30 Pro+ requires the same
quirk as the official Xbox One Bluetooth controllers for rumble to
function.
Other controllers like the N30 Pro 2, SF30 Pro, SN30 Pro, etc. probably
also need this quirk, but I do not have the hardware to test.
Signed-off-by: Nicholas Miell <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The Saitek X52 family of joysticks has a pair of axes that were
originally (by the Windows driver) used as mouse pointer controls. The
corresponding usage page is the Game Controls page, which is not
recognized by the generic HID driver, and therefore, both axes get
mapped to ABS_MISC. The quirk makes the second axis get mapped to
ABS_MISC+1, and therefore made available separately.
One Saitek X52 device is already fixed. This patch fixes the other two
known devices with VID/PID 06a3:0255 and 06a3:0762.
Signed-off-by: Nirenjan Krishnan <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current
CPU for encryption, however the execution can be preemptible since it's
actually user-space context, so the 'using smp_processor_id() in
preemptible' has been observed.
We fix the issue by using the 'get/put_cpu_ptr()' API which consists of
a 'preempt_disable()' instead.
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|