aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-07-13xsk: do not return EMSGSIZE in copy mode for packets larger than MTUMagnus Karlsson1-6/+1
This patch stops returning EMSGSIZE from sendmsg in copy mode when the size of the packet is larger than the MTU. Just send it to the device so that it will drop it as in zero-copy mode. This makes the error reporting consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-13xsk: always return ENOBUFS from sendmsg if there is no TX queueMagnus Karlsson1-3/+2
This patch makes sure ENOBUFS is always returned from sendmsg if there is no TX queue configured. This was not the case for zero-copy mode. With this patch this error reporting is consistent between copy mode and zero-copy mode. Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-13xsk: do not return EAGAIN from sendmsg when completion queue is fullMagnus Karlsson1-3/+1
This patch stops returning EAGAIN in TX copy mode when the completion queue is full as zero-copy does not do this. Instead this situation can be detected by comparing the head and tail pointers of the completion queue in both modes. In any case, EAGAIN was not the correct error code here since no amount of calling sendmsg will solve the problem. Only consuming one or more messages on the completion queue will fix this. With this patch, the error reporting becomes consistent between copy mode and zero-copy mode. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-13xsk: do not return ENXIO from TX copy modeMagnus Karlsson1-3/+1
This patch removes the ENXIO return code from TX copy-mode when someone has forcefully changed the number of queues on the device so that the queue bound to the socket is no longer available. Just silently stop sending anything as in zero-copy mode so the error reporting gets consistent between the two modes. Fixes: 35fcde7f8deb ("xsk: support for Tx") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-07-13btrfs: restore uuid_mutex in btrfs_open_devicesDavid Sterba1-0/+2
Commit 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") switched to device_list_mutex as we need that for the device list traversal, but we also need uuid_mutex to protect access to fs_devices::opened to be consistent with other users of that. Fixes: 542c5908abfe84f7b4c1 ("btrfs: replace uuid_mutex by device_list_mutex in btrfs_open_devices") Reviewed-by: Anand Jain <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-07-13crypto: af_alg - Initialize sg_num_bytes in error code pathStephan Mueller1-1/+3
The RX SGL in processing is already registered with the RX SGL tracking list to support proper cleanup. The cleanup code path uses the sg_num_bytes variable which must therefore be always initialized, even in the error code path. Signed-off-by: Stephan Mueller <[email protected]> Reported-by: [email protected] #syz test: https://github.com/google/kmsan.git master CC: <[email protected]> #4.14 Fixes: e870456d8e7c ("crypto: algif_skcipher - overhaul memory management") Fixes: d887c52d6ae4 ("crypto: algif_aead - overhaul memory management") Signed-off-by: Herbert Xu <[email protected]>
2018-07-13rtc: fix alarm read and set offsetAlexandre Belloni1-3/+5
The offset needs to be added after reading the alarm value. It also needs to be subtracted after the now < alarm test. Tested-by: Jon Hunter <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]>
2018-07-13xen: setup pv irq ops vector earlierJuergen Gross2-16/+12
Setting pv_irq_ops for Xen PV domains should be done as early as possible in order to support e.g. very early printk() usage. The same applies to xen_vcpu_info_reset(0), as it is needed for the pv irq ops. Move the call of xen_setup_machphys_mapping() after initializing the pv functions as it contains a WARN_ON(), too. Remove the no longer necessary conditional in xen_init_irq_ops() from PVH V1 times to make clear this is a PV only function. Cc: <[email protected]> # 4.14 Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-07-12selftests: in udpgso_bench do not test udp zerocopyWillem de Bruijn1-3/+0
The udpgso benchmark compares various configurations of UDP and TCP. Including one that is not upstream, udp zerocopy. This is a leftover from the earlier RFC patchset. The test is part of kselftests and run in continuous spinners. Remove the failing case to make the test start passing. Fixes: 3a687bef148d ("selftests: udp gso benchmark") Reported-by: Naresh Kamboju <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12tracing: Reorder display of TGID to be after PIDJoel Fernandes (Google)2-6/+7
Currently ftrace displays data in trace output like so: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU TGID |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 [000] ( 1091) d..2 28.313544: sched_switch: However Android's trace visualization tools expect a slightly different format due to an out-of-tree patch patch that was been carried for a decade, notice that the TGID and CPU fields are reversed: _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID TGID CPU |||| TIMESTAMP FUNCTION | | | | |||| | | bash-1091 ( 1091) [002] d..2 64.965177: sched_switch: From kernel v4.13 onwards, during which TGID was introduced, tracing with systrace on all Android kernels will break (most Android kernels have been on 4.9 with Android patches, so this issues hasn't been seen yet). From v4.13 onwards things will break. The chrome browser's tracing tools also embed the systrace viewer which uses the legacy TGID format and updates to that are known to be difficult to make. Considering this, I suggest we make this change to the upstream kernel and backport it to all Android kernels. I believe this feature is merged recently enough into the upstream kernel that it shouldn't be a problem. Also logically, IMO it makes more sense to group the TGID with the TASK-PID and the CPU after these. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: 441dae8f2f29 ("tracing: Add support for display of tgid in trace output") Signed-off-by: Joel Fernandes (Google) <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-07-12packet: reset network header if packet shorter than ll reserved spaceWillem de Bruijn1-0/+2
If variable length link layer headers result in a packet shorter than dev->hard_header_len, reset the network header offset. Else skb->mac_len may exceed skb->len after skb_mac_reset_len. packet_sendmsg_spkt already has similar logic. Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12nsh: set mac len based on inner packetWillem de Bruijn1-1/+1
When pulling the NSH header in nsh_gso_segment, set the mac length based on the encapsulated packet type. skb_reset_mac_len computes an offset to the network header, which here still points to the outer packet: > skb_reset_network_header(skb); > [...] > __skb_pull(skb, nsh_len); > skb_reset_mac_header(skb); // now mac hdr starts nsh_len == 8B after net hdr > skb_reset_mac_len(skb); // mac len = net hdr - mac hdr == (u16) -8 == 65528 > [..] > skb_mac_gso_segment(skb, ..) Link: http://lkml.kernel.org/r/CAF=yD-KeAcTSOn4AxirAxL8m7QAS8GBBe1w09eziYwvPbbUeYA@mail.gmail.com Reported-by: [email protected] Fixes: c411ed854584 ("nsh: add GSO support") Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12net: Don't copy pfmemalloc flag in __copy_skb_header()Stefano Brivio2-5/+7
The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b19372273164 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by: Patrick Talbert <[email protected]> Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12Merge branch 'sfc-filter-locking-fixes'David S. Miller2-18/+29
Bert Kenward says: ==================== sfc: filter locking fixes Two fixes for sfc ef10 filter table locking. Initially spotted by lockdep, but one issue has also been seen in normal use. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-12sfc: hold filter_sem consistently during resetBert Kenward1-9/+8
We should take and release the filter_sem consistently during the reset process, in the same manner as the mac_lock and reset_lock. For lockdep consistency we also take the filter_sem for write around other calls to efx->type->init(). Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Signed-off-by: Bert Kenward <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12sfc: avoid hang from nested use of the filter_semBert Kenward1-9/+21
In some situations we may end up calling down_read while already holding the semaphore for write, thus hanging. This has been seen when setting the MAC address for the interface. The hung task log in this situation includes this stack: down_read efx_ef10_filter_insert efx_ef10_filter_insert_addr_list efx_ef10_filter_vlan_sync_rx_mode efx_ef10_filter_add_vlan efx_ef10_filter_table_probe efx_ef10_set_mac_address efx_set_mac_address dev_set_mac_address In addition, lockdep rightly points out that nested calling of down_read is incorrect. Fixes: c2bebe37c6b6 ("sfc: give ef10 its own rwsem in the filter table instead of filter_lock") Tested-by: Jarod Wilson <[email protected]> Signed-off-by: Bert Kenward <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12net: systemport: Fix CRC forwarding check for SYSTEMPORT LiteFlorian Fainelli2-3/+4
SYSTEMPORT Lite reversed the logic compared to SYSTEMPORT, the GIB_FCS_STRIP bit is set when the Ethernet FCS is stripped, and that bit is not set by default. Fix the logic such that we properly check whether that bit is set or not and we don't forward an extra 4 bytes to the network stack. Fixes: 44a4524c54af ("net: systemport: Add support for SYSTEMPORT Lite") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12i2c: recovery: if possible send STOP with recovery pulsesWolfram Sang1-1/+10
I2C clients may misunderstand recovery pulses if they can't read SDA to bail out early. In the worst case, as a write operation. To avoid that and if we can write SDA, try to send STOP to avoid the misinterpretation. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2018-07-12tcp: allow user to create repair socket without window probesStefan Baranoff1-3/+5
Under rare conditions where repair code may be used it is possible that window probes are either unnecessary or undesired. If the user knows that window probes are not wanted or needed this change allows them to skip sending them when a socket comes out of repair. Signed-off-by: Stefan Baranoff <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12tcp: fix sequence numbers for repaired sockets re-using TIME-WAIT socketsStefan Baranoff1-5/+18
This patch fixes a bug where the sequence numbers of a socket created using TCP repair functionality are lower than set after connect is called. This occurs when the repair socket overlaps with a TIME-WAIT socket and triggers the re-use code. The amount lower is equal to the number of times that a particular IP/port set is re-used and then put back into TIME-WAIT. Re-using the first time the sequence number is 1 lower, closing that socket and then re-opening (with repair) a new socket with the same addresses/ports puts the sequence number 2 lower than set via setsockopt. The third time is 3 lower, etc. I have not tested what the limit of this acrewal is, if any. The fix is, if a socket is in repair mode, to respect the already set sequence number and timestamp when it would have already re-used the TIME-WAIT socket. Signed-off-by: Stefan Baranoff <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12bpf: don't leave partial mangled prog in jit_subprogs error pathDaniel Borkmann1-2/+9
syzkaller managed to trigger the following bug through fault injection: [...] [ 141.043668] verifier bug. No program starts at insn 3 [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.044648] WARNING: CPU: 3 PID: 4072 at kernel/bpf/verifier.c:1613 bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.047355] CPU: 3 PID: 4072 Comm: a.out Not tainted 4.18.0-rc4+ #51 [ 141.048446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS 1.10.2-1 04/01/2014 [ 141.049877] Call Trace: [ 141.050324] __dump_stack lib/dump_stack.c:77 [inline] [ 141.050324] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 [ 141.050950] ? dump_stack_print_info.cold.2+0x52/0x52 lib/dump_stack.c:60 [ 141.051837] panic+0x238/0x4e7 kernel/panic.c:184 [ 141.052386] ? add_taint.cold.5+0x16/0x16 kernel/panic.c:385 [ 141.053101] ? __warn.cold.8+0x148/0x1ba kernel/panic.c:537 [ 141.053814] ? __warn.cold.8+0x117/0x1ba kernel/panic.c:530 [ 141.054506] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.054506] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.054506] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [ 141.055163] __warn.cold.8+0x163/0x1ba kernel/panic.c:538 [ 141.055820] ? get_callee_stack_depth kernel/bpf/verifier.c:1612 [inline] [ 141.055820] ? fixup_call_args kernel/bpf/verifier.c:5587 [inline] [ 141.055820] ? bpf_check+0x525e/0x5e60 kernel/bpf/verifier.c:5952 [...] What happens in jit_subprogs() is that kcalloc() for the subprog func buffer is failing with NULL where we then bail out. Latter is a plain return -ENOMEM, and this is definitely not okay since earlier in the loop we are walking all subprogs and temporarily rewrite insn->off to remember the subprog id as well as insn->imm to temporarily point the call to __bpf_call_base + 1 for the initial JIT pass. Thus, bailing out in such state and handing this over to the interpreter is troublesome since later/subsequent e.g. find_subprog() lookups are based on wrong insn->imm. Therefore, once we hit this point, we need to jump to out_free path where we undo all changes from earlier loop, so that interpreter can work on unmodified insn->{off,imm}. Another point is that should find_subprog() fail in jit_subprogs() due to a verifier bug, then we also should not simply defer the program to the interpreter since also here we did partial modifications. Instead we should just bail out entirely and return an error to the user who is trying to load the program. Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-07-12sch_fq_codel: zero q->flows_cnt when fq_codel_init failsJacob Keller1-7/+18
When fq_codel_init fails, qdisc_create_dflt will cleanup by using qdisc_destroy. This function calls the ->reset() op prior to calling the ->destroy() op. Unfortunately, during the failure flow for sch_fq_codel, the ->flows parameter is not initialized, so the fq_codel_reset function will null pointer dereference. kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 kernel: IP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: PGD 0 P4D 0 kernel: Oops: 0000 [#1] SMP PTI kernel: Modules linked in: i40iw i40e(OE) xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc devlink ebtable_filter ebtables ip6table_filter ip6_tables rpcrdma ib_isert iscsi_target_mod sunrpc ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate iTCO_wdt iTCO_vendor_support intel_uncore ib_core intel_rapl_perf mei_me mei joydev i2c_i801 lpc_ich ioatdma shpchp wmi sch_fq_codel xfs libcrc32c mgag200 ixgbe drm_kms_helper isci ttm firewire_ohci kernel: mdio drm igb libsas crc32c_intel firewire_core ptp pps_core scsi_transport_sas crc_itu_t dca i2c_algo_bit ipmi_si ipmi_devintf ipmi_msghandler [last unloaded: i40e] kernel: CPU: 10 PID: 4219 Comm: ip Tainted: G OE 4.16.13custom-fq-codel-test+ #3 kernel: Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.05.0004.051120151007 05/11/2015 kernel: RIP: 0010:fq_codel_reset+0x58/0xd0 [sch_fq_codel] kernel: RSP: 0018:ffffbfbf4c1fb620 EFLAGS: 00010246 kernel: RAX: 0000000000000400 RBX: 0000000000000000 RCX: 00000000000005b9 kernel: RDX: 0000000000000000 RSI: ffff9d03264a60c0 RDI: ffff9cfd17b31c00 kernel: RBP: 0000000000000001 R08: 00000000000260c0 R09: ffffffffb679c3e9 kernel: R10: fffff1dab06a0e80 R11: ffff9cfd163af800 R12: ffff9cfd17b31c00 kernel: R13: 0000000000000001 R14: ffff9cfd153de600 R15: 0000000000000001 kernel: FS: 00007fdec2f92800(0000) GS:ffff9d0326480000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000008 CR3: 0000000c1956a006 CR4: 00000000000606e0 kernel: Call Trace: kernel: qdisc_destroy+0x56/0x140 kernel: qdisc_create_dflt+0x8b/0xb0 kernel: mq_init+0xc1/0xf0 kernel: qdisc_create_dflt+0x5a/0xb0 kernel: dev_activate+0x205/0x230 kernel: __dev_open+0xf5/0x160 kernel: __dev_change_flags+0x1a3/0x210 kernel: dev_change_flags+0x21/0x60 kernel: do_setlink+0x660/0xdf0 kernel: ? down_trylock+0x25/0x30 kernel: ? xfs_buf_trylock+0x1a/0xd0 [xfs] kernel: ? rtnl_newlink+0x816/0x990 kernel: ? _xfs_buf_find+0x327/0x580 [xfs] kernel: ? _cond_resched+0x15/0x30 kernel: ? kmem_cache_alloc+0x20/0x1b0 kernel: ? rtnetlink_rcv_msg+0x200/0x2f0 kernel: ? rtnl_calcit.isra.30+0x100/0x100 kernel: ? netlink_rcv_skb+0x4c/0x120 kernel: ? netlink_unicast+0x19e/0x260 kernel: ? netlink_sendmsg+0x1ff/0x3c0 kernel: ? sock_sendmsg+0x36/0x40 kernel: ? ___sys_sendmsg+0x295/0x2f0 kernel: ? ebitmap_cmp+0x6d/0x90 kernel: ? dev_get_by_name_rcu+0x73/0x90 kernel: ? skb_dequeue+0x52/0x60 kernel: ? __inode_wait_for_writeback+0x7f/0xf0 kernel: ? bit_waitqueue+0x30/0x30 kernel: ? fsnotify_grab_connector+0x3c/0x60 kernel: ? __sys_sendmsg+0x51/0x90 kernel: ? do_syscall_64+0x74/0x180 kernel: ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2 kernel: Code: 00 00 48 89 87 00 02 00 00 8b 87 a0 01 00 00 85 c0 0f 84 84 00 00 00 31 ed 48 63 dd 83 c5 01 48 c1 e3 06 49 03 9c 24 90 01 00 00 <48> 8b 73 08 48 8b 3b e8 6c 9a 4f f6 48 8d 43 10 48 c7 03 00 00 kernel: RIP: fq_codel_reset+0x58/0xd0 [sch_fq_codel] RSP: ffffbfbf4c1fb620 kernel: CR2: 0000000000000008 kernel: ---[ end trace e81a62bede66274e ]--- This is caused because flows_cnt is non-zero, but flows hasn't been initialized. fq_codel_init has left the private data in a partially initialized state. To fix this, reset flows_cnt to 0 when we fail to initialize. Additionally, to make the state more consistent, also cleanup the flows pointer when the allocation of backlogs fails. This fixes the NULL pointer dereference, since both the for-loop and memset in fq_codel_reset will be no-ops when flow_cnt is zero. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12Merge branch '10GbE' of ↵David S. Miller4-87/+141
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-07-12 This series contains updates to ixgbe and e100/e1000 kernel documentation. Alex fixes ixgbe to ensure that we are more explicit about the ordering of updates to the receive address register (RAR) table. Dan Carpenter fixes an issue where we were reading one element beyond the end of the array. Mauro Carvalho Chehab fixes formatting issues in the e100.rst and e1000.rst that were causing errors during 'make htmldocs'. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-12Merge tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtdLinus Torvalds1-2/+4
Pull MTD fix from Boris Brezillon: "A SPI NOR fix to fix a timeout in the cadence QSPI controller driver" * tag 'mtd/fixes-for-4.18-rc5' of git://git.infradead.org/linux-mtd: mtd: spi-nor: cadence-quadspi: Fix direct mode write timeouts
2018-07-13kbuild: suppress warnings from 'getconf LFS_*'Masahiro Yamada1-3/+3
Suppress warnings for systems that do not recognize LFS_*. getconf: no such configuration parameter `LFS_CFLAGS' getconf: no such configuration parameter `LFS_LDFLAGS' getconf: no such configuration parameter `LFS_LIBS' Fixes: d7f14c66c273 ("kbuild: Enable Large File Support for hostprogs") Reported-by: Chen Feng <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Uwe Kleine-König <[email protected]>
2018-07-13scripts/tags.sh: add __ro_after_initConstantine Shulyupin1-1/+1
Signed-off-by: Constantine Shulyupin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools: build: Use HOSTLDFLAGS with fixdepLaura Abbott1-1/+1
The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS. Fix this. Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools: build: Fixup host c flagsLaura Abbott2-2/+2
Commit 0c3b7e42616f ("tools build: Add support for host programs format") introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the variable is HOSTCFLAGS. Fix this up. Fixes: 0c3b7e42616f ("tools build: Add support for host programs format") Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-13tools build: fix # escaping in .cmd files for future MakePaul Menzel1-2/+2
In 2016 GNU Make made a backwards incompatible change to the way '#' characters were handled in Makefiles when used inside functions or macros: http://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Due to this change, when attempting to run `make prepare' I get a spurious make syntax error: /home/earnest/linux/tools/objtool/.fixdep.o.cmd:1: *** missing separator. Stop. When inspecting `.fixdep.o.cmd' it includes two lines which use unescaped comment characters at the top: \# cannot find fixdep (/home/earnest/linux/tools/objtool//fixdep) \# using basic dep data This is because `tools/build/Build.include' prints these '\#' characters: printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \ This completes commit 9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make"). Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: [email protected] Signed-off-by: Paul Menzel <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-07-12networking: e1000.rst: Get rid of Sphinx warningsMauro Carvalho Chehab1-75/+112
Documentation/networking/e1000.rst:83: ERROR: Unexpected indentation. Documentation/networking/e1000.rst:84: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:173: WARNING: Definition list ends without a blank line; unexpected unindent. Documentation/networking/e1000.rst:236: WARNING: Definition list ends without a blank line; unexpected unindent. While here, fix highlights and mark a table as such. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12networking: e100.rst: Get rid of Sphinx warningsMauro Carvalho Chehab1-10/+17
Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found. Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string. While here, fix some highlights. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12ixgbe: Off by one in ixgbe_ipsec_tx()Dan Carpenter1-1/+1
The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs to be changed to >= so we don't read one element beyond the end of the array. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12amd/dc/dce100: On dce100, set clocks to 0 on suspendDavid Francis1-3/+16
[Why] When a dce100 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a pernicious blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: David Francis <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-12drm/amd/display: Convert 10kHz clks from PPLib into kHz for VegaHarry Wentland1-2/+3
The driver is expecting clock frequency in kHz, while SMU returns the values in 10kHz, which causes the bandwidth validation to fail 4.18 has the faulty clock assignment in pp_to_dc_clock_levels_with_latency only, which is only used by Vega. Make sure we multiply these values by 10 here, as we do for other ASICs as powerplay assigned them wrong. 4.19 has the proper fix in powerplay. v2: Add Fixes tag v3: Fixes -> Bugzilla, with simplified link Bugzilla: https://bugs.freedesktop.org/107082 Signed-off-by: Mikita Lipski <[email protected]> Signed-off-by: Harry Wentland <[email protected]> Acked-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-12ixgbe: Be more careful when modifying MAC filtersAlexander Duyck1-1/+11
This change makes it so that we are much more explicit about the ordering of updates to the receive address register (RAR) table. Prior to this patch I believe we may have been updating the table while entries were still active, or possibly allowing for reordering of things since we weren't explicitly flushing writes to either the lower or upper portion of the register prior to accessing the other half. Signed-off-by: Alexander Duyck <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-07-12ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controllerAdam Ford1-0/+5
The AM3517 has a different OTG controller location than the OMAP3, which is included from omap3.dtsi. This results in a hwmod error. Since the AM3517 has a different OTG controller address, this patch disabes one that is isn't available. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2018-07-12Merge tag 'perf-urgent-for-mingo-4.18-20180711' of ↵Ingo Molnar14-81/+84
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: python interface fixes: - Make 'perf script -g python' generate scripts that are compatible with both python 2 and 3 (Jeremy Cline) - Fix python dictionary reference counting (Janne Huttunen) - Add python3 support for various python scripts (Jeremy Cline) - Use python-config --includes rather than --cflags, fixing the build on Fedora, where the python 3.7 started adding -flto to what perf stat fixes: - Remove needless extra header line in --interval_clear (Jiri Olsa) python-config --cflags generate, breaking the perf build (Jeremy Cline) Build fixes: - Fix compilation errors on gcc8 (Jiri Olsa) perf llvm-utils fixes: - Remove bashism from kernel include fetch script (Kim Phillips) perf test fixes: (Kim Phillips) - Replace '|&' with '2>&1 |' to work with more shells - Make perf's inet_pton test more portable - Prevent temporary editor files from being considered test scripts Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2018-07-12ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary coresNishanth Menon1-0/+41
Call secure services to enable ACTLR[0] (Enable invalidates of BTB with ICIALLU) when branch hardening is enabled for kernel. On GP devices OMAP5/DRA7, there is no possibility to update secure side since "secure world" is ROM and there are no override mechanisms possible. On HS devices, appropriate PPA should do the workarounds as well. However, the configuration is only done for secondary core, since it is expected that firmware/bootloader will have enabled the required configuration for the primary boot core (note: bootloaders typically will NOT enable secondary processors, since it has no need to do so). Signed-off-by: Nishanth Menon <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2018-07-12xen: remove global bit from __default_kernel_pte_mask for pv guestsJuergen Gross1-0/+1
When removing the global bit from __supported_pte_mask do the same for __default_kernel_pte_mask in order to avoid the WARN_ONCE() in check_pgprot() when setting a kernel pte before having called init_mem_mapping(). Cc: <[email protected]> # 4.17 Reported-by: Michael Young <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-07-12Merge branch 'ieee802154-for-davem-2018-07-11' of ↵David S. Miller5-14/+46
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2018-07-11 An update from ieee802154 for your *net* tree. Build system fix for a missing include from Arnd Bergmann. Setting the IFLA_LINK for the lowpan parent from Lubomir Rintel. Fixes for some RX corner cases in adf7242 driver by Michael Hennerich. And some small patches to cleanup our BUG_ON vs WARN_ON usage. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-12ALSA: hda/ca0132: Update a pci quirk device nameAlastair Bridgewater1-1/+1
The PCI subsystem in question for this quirk rule has been identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the device name appropriately. Signed-off-by: Alastair Bridgewater <[email protected]> Reviewed-by: Connor McAdams <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-07-12ALSA: hda/ca0132: Add Recon3Di quirk for Gigabyte G1.Sniper Z97Alastair Bridgewater1-0/+1
These motherboards have Sound Core3D and apparently "support" Recon3Di. Added to the quirk list as QUIRK_R3DI. Issue report, PCI Subsystem ID, and testing by a contributor on IRC who wished to remain anonymous. Signed-off-by: Alastair Bridgewater <[email protected]> Reviewed-by: Connor McAdams <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-07-12Merge tag 'gvt-fixes-2018-07-11' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi5-1/+81
drm-intel-fixes gvt-fixes-2018-07-11 - Fix KBL virtual register update from LRI for GPU hang (Henry) Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-12qed: fix spelling mistake "successffuly" -> "successfully"Ewan D. Milne1-1/+1
Trivial fix to spelling mistake in qed_probe message. Signed-off-by: Ewan D. Milne <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-12nvme-pci: fix memory leak on probe failureKeith Busch1-5/+7
The nvme driver specific structures need to be initialized prior to enabling the generic controller so we can unwind on failure with out using the reference counting callbacks so that 'probe' and 'remove' can be symmetric. The newly added iod_mempool is the only resource that was being allocated out of order, and a failure there would leak the generic controller memory. This patch just moves that allocation above the controller initialization. Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Reported-by: Weiping Zhang <[email protected]> Signed-off-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2018-07-11sfp: fix module initialisation with netdev already upRussell King1-2/+2
It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-11sfp: ensure we clean up properly on bus registration failureRussell King1-7/+24
We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-07-11bpf: fix panic due to oob in bpf_prog_test_run_skbDaniel Borkmann2-4/+36
sykzaller triggered several panics similar to the below: [...] [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90 [ 248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425 [...] [ 248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13 [ 248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018 [ 248.865905] Call Trace: [ 248.865910] dump_stack+0xd6/0x185 [ 248.865911] ? show_regs_print_info+0xb/0xb [ 248.865913] ? printk+0x9c/0xc3 [ 248.865915] ? kmsg_dump_rewind_nolock+0xe4/0xe4 [ 248.865919] print_address_description+0x6f/0x270 [ 248.865920] kasan_report+0x25b/0x380 [ 248.865922] ? _copy_to_user+0x5c/0x90 [ 248.865924] check_memory_region+0x137/0x190 [ 248.865925] kasan_check_read+0x11/0x20 [ 248.865927] _copy_to_user+0x5c/0x90 [ 248.865930] bpf_test_finish.isra.8+0x4f/0xc0 [ 248.865932] bpf_prog_test_run_skb+0x6a0/0xba0 [...] After scrubbing the BPF prog a bit from the noise, turns out it called bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb() and the same skb thus keeps changing until the pskb_expand_head() called from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM. So upon return we'll basically have 0 headroom left yet blindly do the __skb_push() of 14 bytes and keep copying data from there in bpf_test_finish() out of bounds. Fix to check if we have enough headroom and if pskb_expand_head() fails, bail out with error. Another bug independent of this fix (but related in triggering above) is that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to it's original state from input as otherwise repeating the same test in a loop won't work for benchmarking when underlying input buffer is getting changed by the prog each time and reused for the next run leading to unexpected results. Fixes: 1cf1cae963c2 ("bpf: introduce BPF_PROG_TEST_RUN command") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-07-11ARM: 8780/1: ftrace: Only set kernel memory back to read-only after bootSteven Rostedt (VMware)1-0/+9
Dynamic ftrace requires modifying the code segments that are usually set to read-only. To do this, a per arch function is called both before and after the ftrace modifications are performed. The "before" function will set kernel code text to read-write to allow for ftrace to make the modifications, and the "after" function will set the kernel code text back to "read-only" to keep the kernel code text protected. The issue happens when dynamic ftrace is tested at boot up. The test is done before the kernel code text has been set to read-only. But the "before" and "after" calls are still performed. The "after" call will change the kernel code text to read-only prematurely, and other boot code that expects this code to be read-write will fail. The solution is to add a variable that is set when the kernel code text is expected to be converted to read-only, and make the ftrace "before" and "after" calls do nothing if that variable is not yet set. This is similar to the x86 solution from commit 162396309745 ("ftrace, x86: make kernel text writable only for conversions"). Link: http://lkml.kernel.org/r/[email protected] Reported-by: Stefan Agner <[email protected]> Tested-by: Stefan Agner <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Russell King <[email protected]>
2018-07-11bpf: btf: Fix bitfield extraction for big endianOkash Khawaja1-17/+13
When extracting bitfield from a number, btf_int_bits_seq_show() builds a mask and accesses least significant byte of the number in a way specific to little-endian. This patch fixes that by checking endianness of the machine and then shifting left and right the unneeded bits. Thanks to Martin Lau for the help in navigating potential pitfalls when dealing with endianess and for the final solution. Fixes: b00b8daec828 ("bpf: btf: Add pretty print capability for data with BTF type info") Signed-off-by: Okash Khawaja <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.