| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
New firmware allows PHY loopback to be set without disabling autoneg
first. Check this capability and skip disabling autoneg when
it is supported by firmware. Using this scheme, loopback will
always work even if the PHY only supports autoneg.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver currently only assignes 1 RSS context to each VF. This works
for the Linux VF driver. But other drivers, such as DPDK, can make use
of additional RSS contexts. Modify the code to divide up and assign
RSS contexts to VFs just like other resources.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some chips that need host context memory as a backing store requires
the memory to be initialized to a non-zero value. Query the
value from firmware and initialize the context memory accordingly.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Driver calls HWRM_FUNC_RESET firmware call while resuming the device
which clears the context memory backing store. Because of which
allocating firmware resources would eventually fail. Fix it by freeing
all context memory during suspend and reallocate the memory during resume.
Call bnxt_hwrm_queue_qportcfg() in resume path. This firmware call
is needed on the 57500 chips so that firmware will set up the proper
queue mapping in relation to the context memory.
Signed-off-by: Vasundhara Volam <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After driver unregister, firmware is erasing the information that
driver supports new resource management. Send FUNC_RESOURCE_QCAPS
command to inform the firmware that driver supports new resource
management while resuming from hibernation. Otherwise, we fallback
to the older resource allocation scheme.
Also, move driver register after sending FUNC_RESOURCE_QCAPS command
to be consistent with the normal initialization sequence.
Signed-off-by: Vasundhara Volam <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Everytime driver registers with firmware, driver is required to
register for async event notifications as well. These 2 calls
are done using the same firmware command and can be combined.
We are also missing the 2nd step to register for async events
in the suspend/resume path and this will fix it. Prior to this,
we were getting only default notifications.
ULP can register for additional async events for the RDMA driver,
so we add a parameter to the new function to only do step 2 when
it is called from ULP.
Signed-off-by: Vasundhara Volam <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the bnxt_init_one() failure path, if the driver has already called
firmware to register the driver, it is not undoing the driver
registration. Add this missing step to unregister for correctness,
so that the firmware knows that the driver has unloaded.
Signed-off-by: Vasundhara Volam <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Disable Bus master during suspend to prevent DMAs after the device
goes into D3hot state. The new 57500 devices may continue to DMA
from context memory after the system goes into D3hot state. This
may cause some PCIe errors on some system. Re-enable it during resume.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix BNXT_CHIP_NUM_5645X() to include 57452 and 56454 chip IDs, so
that these chips will be properly classified as P4 chips to take
advantage of the P4 fixes and features.
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The rfs members of struct efx_channel are under CONFIG_RFS_ACCEL.
Ethtool stats which access those need to be as well.
Reported-by: kbuild test robot <[email protected]>
Fixes: ca70bd423f10 ("sfc: add statistics for ARFS")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Pull cramfs fix from Al Viro:
"Regression fix, fallen through the cracks"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
cramfs: fix usage on non-MTD device
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.
Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.
Fixes: 74f78fc5ef43 ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <[email protected]>
Signed-off-by: Nicolas Pitre <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
The recording of RSS hash should be controlled by NETIF_F_RXHASH.
Fixes: 1fac7ca4e63b ("hv_netvsc: record hardware hash in skb")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: Haiyang Zhang <[email protected]>
Reviewed-by: Michael Kelley <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch is to fix a data-race reported by syzbot:
BUG: KCSAN: data-race in sctp_assoc_migrate / sctp_hash_obj
write to 0xffff8880b67c0020 of 8 bytes by task 18908 on cpu 1:
sctp_assoc_migrate+0x1a6/0x290 net/sctp/associola.c:1091
sctp_sock_migrate+0x8aa/0x9b0 net/sctp/socket.c:9465
sctp_accept+0x3c8/0x470 net/sctp/socket.c:4916
inet_accept+0x7f/0x360 net/ipv4/af_inet.c:734
__sys_accept4+0x224/0x430 net/socket.c:1754
__do_sys_accept net/socket.c:1795 [inline]
__se_sys_accept net/socket.c:1792 [inline]
__x64_sys_accept+0x4e/0x60 net/socket.c:1792
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff8880b67c0020 of 8 bytes by task 12003 on cpu 0:
sctp_hash_obj+0x4f/0x2d0 net/sctp/input.c:894
rht_key_get_hash include/linux/rhashtable.h:133 [inline]
rht_key_hashfn include/linux/rhashtable.h:159 [inline]
rht_head_hashfn include/linux/rhashtable.h:174 [inline]
head_hashfn lib/rhashtable.c:41 [inline]
rhashtable_rehash_one lib/rhashtable.c:245 [inline]
rhashtable_rehash_chain lib/rhashtable.c:276 [inline]
rhashtable_rehash_table lib/rhashtable.c:316 [inline]
rht_deferred_worker+0x468/0xab0 lib/rhashtable.c:420
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
It was caused by rhashtable access asoc->base.sk when sctp_assoc_migrate
is changing its value. However, what rhashtable wants is netns from asoc
base.sk, and for an asoc, its netns won't change once set. So we can
simply fix it by caching netns since created.
Fixes: d6c0256a60e6 ("sctp: add the rhashtable apis for sctp global transport hashtable")
Reported-by: [email protected]
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the implementation of sctp_sf_do_5_2_4_dupcook() the allocated
new_asoc is leaked if security_sctp_assoc_request() fails. Release it
via sctp_association_free().
Fixes: 2277c7cd75e3 ("sctp: Add LSM hooks")
Signed-off-by: Navid Emamdoost <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use vlan common api to access the vlan_tag info.
Signed-off-by: Tonghao Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-11-22
1) Misc Cleanups
2) Software steering support for Geneve
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rename the mac_link_state() method to mac_pcs_get_state() to make it
clear that it should be returning the MACs PCS current state, which
is used for inband negotiation rather than just reading back what the
MAC has been configured for. Update the documentation to explicitly
mention that this is for inband.
We drop the return value as well; most of phylink doesn't check the
return value and it is not clear what it should do on error - instead
arrange for state->link to be false.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PROM only enables ethernet PHY on first Origin 200 module, so we must
do it ourselves for the second module.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Generation of fake subdevice ID had vendor and device ID swapped.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Paul Burton <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
|
|
Pull last minute virtio bugfixes from Michael Tsirkin:
"Minor bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_balloon: fix shrinker count
virtio_balloon: fix shrinker scan number of pages
virtio_console: allocate inbufs in add_port() only if it is needed
virtio_ring: fix return code on DMA mapping fails
|
|
rhashtable_lookup_fast() internally calls rcu_read_lock() then,
calls rhashtable_lookup(). So if rcu_read_lock() is already held,
rhashtable_lookup() is enough.
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.5
Last set of patches for v5.5. Major features here 802.11ax support for
qtnfmac and airtime fairness support to mt76. And naturally smaller
fixes and improvements all over.
Major changes:
qtnfmac
* add 802.11ax support in AP mode
* enable offload bridging support
iwlwifi
* support TX/RX antennas reporting
mt76
* mt7615 smart carrier sense support
* aggregation statistics via debugfs
* airtime fairness (ATF) support
* mt76x0 OF mac address support
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Robert Schwebel says:
====================
here is v2 of the series converting the NFC documentation from txt to
rst. Thanks to Jonathan and Dave for the input.
Changes since (implicit) v1:
* replace code-block by more compact :: syntax
* really add the rst file to the index
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that the sphinx syntax has been fixed, change the document from txt
to rst and add it to the index.
Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Silence this warning:
Documentation/networking/nfc.rst:113: WARNING: Definition list ends without
a blank line; unexpected unindent.
Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix this warning:
Documentation/networking/nfc.rst:87: WARNING: Bullet list ends without
a blank line; unexpected unindent.
Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change the block diagram to match the sphinx syntax. This will make it
possible to switch this file to rst in the future.
Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The headlines in this file do are not in the standard kernel docu-
mentation headline format. Change it, so this file can be switched to
rst in the future.
Signed-off-by: Robert Schwebel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When a phydev is created, the speed and duplex are set to zero and
-1 respectively, rather than using the predefined SPEED_UNKNOWN and
DUPLEX_UNKNOWN constants.
There is a window at initialisation time where we may report link
down using the 0/-1 values. Tidy this up and use the predefined
constants, so debug doesn't complain with:
"Unsupported (update phy-core.c)/Unsupported (update phy-core.c)"
when the speed and duplex settings are printed.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
There are no users of phy_ethtool_sset() in the kernel anymore, and
as of commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize
and supported from u32 to link mode"), the implementation is slightly
buggy - it doesn't correctly check the masked advertising mask as it
used to.
Remove it, and update the phy documentation to refer to its replacement
function.
Signed-off-by: Russell King <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This commit reverts commit 91e6015b082b ("bpf: Emit audit messages
upon successful prog load and unload") and its follow up commit
7599a896f2e4 ("audit: Move audit_log_task declaration under
CONFIG_AUDITSYSCALL") as requested by Paul Moore. The change needs
close review on linux-audit, tests etc.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 37e4c997dadf ("KVM: VMX: validate individual bits of guest
MSR_IA32_FEATURE_CONTROL") broke the KVM_SET_MSRS ABI by instituting
new constraints on the data values that kvm would accept for the guest
MSR, IA32_FEATURE_CONTROL. Perhaps these constraints should have been
opt-in via a new KVM capability, but they were applied
indiscriminately, breaking at least one existing hypervisor.
Relax the constraints to allow either or both of
FEATURE_CONTROL_VMXON_ENABLED_OUTSIDE_SMX and
FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX to be set when nVMX is
enabled. This change is sufficient to fix the aforementioned breakage.
Fixes: 37e4c997dadf ("KVM: VMX: validate individual bits of guest MSR_IA32_FEATURE_CONTROL")
Signed-off-by: Jim Mattson <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Acquire kvm->srcu for the duration of ->set_nested_state() to fix a bug
where nVMX derefences ->memslots without holding ->srcu or ->slots_lock.
The other half of nested migration, ->get_nested_state(), does not need
to acquire ->srcu as it is a purely a dump of internal KVM (and CPU)
state to userspace.
Detected as an RCU lockdep splat that is 100% reproducible by running
KVM's state_test selftest with CONFIG_PROVE_LOCKING=y. Note that the
failing function, kvm_is_visible_gfn(), is only checking the validity of
a gfn, it's not actually accessing guest memory (which is more or less
unsupported during vmx_set_nested_state() due to incorrect MMU state),
i.e. vmx_set_nested_state() itself isn't fundamentally broken. In any
case, setting nested state isn't a fast path so there's no reason to go
out of our way to avoid taking ->srcu.
=============================
WARNING: suspicious RCU usage
5.4.0-rc7+ #94 Not tainted
-----------------------------
include/linux/kvm_host.h:626 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by evmcs_test/10939:
#0: ffff88826ffcb800 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x85/0x630 [kvm]
stack backtrace:
CPU: 1 PID: 10939 Comm: evmcs_test Not tainted 5.4.0-rc7+ #94
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
dump_stack+0x68/0x9b
kvm_is_visible_gfn+0x179/0x180 [kvm]
mmu_check_root+0x11/0x30 [kvm]
fast_cr3_switch+0x40/0x120 [kvm]
kvm_mmu_new_cr3+0x34/0x60 [kvm]
nested_vmx_load_cr3+0xbd/0x1f0 [kvm_intel]
nested_vmx_enter_non_root_mode+0xab8/0x1d60 [kvm_intel]
vmx_set_nested_state+0x256/0x340 [kvm_intel]
kvm_arch_vcpu_ioctl+0x491/0x11a0 [kvm]
kvm_vcpu_ioctl+0xde/0x630 [kvm]
do_vfs_ioctl+0xa2/0x6c0
ksys_ioctl+0x66/0x70
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x54/0x200
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f59a2b95f47
Fixes: 8fcc4b5923af5 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE")
Cc: [email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Fold shared_msr_update() into its sole user to eliminate its pointless
bounds check, its godawful printk, its misleading comment (it's called
under a global lock), and its woefully inaccurate name.
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The jump label out_free_1 and out_free_2 deal with
the same stuff, so git rid of one and rename the
label out_free_0a to retain the label name order.
Signed-off-by: Miaohe Lin <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
A recent change inadvertently exported a static function, which results
in modpost throwing a warning. Fix it.
Fixes: cbbaa2727aa3 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Sean Christopherson <[email protected]>
Cc: [email protected]
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
Jin Yao:
- Allow entering the annotation view (symbol source/assembly +
overhead/cycles/etc column) from the 'perf report --total-cycles'
interface.
E.g.:
# perf record --all-cpus --branch-any --all-kernel
^C[ perf record: Woken up 5 times to write data ]
#
# perf evlist -v
cycles: size: 120, { sample_period, sample_freq }: 4000,
sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK,
read_format: ID, disabled: 1, inherit: 1, exclude_user: 1, mmap: 1, comm: 1, freq: 1, task: 1,
precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1,
bpf_event: 1, branch_sample_type: ANY
#
# perf report --total-cycles
#
# Samples: 78762 of event 'cycles'
Sampled Sampled Avg Avg
Cycles% Cycles Cycles% Cycles [Program Block Range] Shared Object
1.72% 95.8K 0.00% 254 [msr.h:105 -> msr.h:166] [kernel.vmlinux]
1.56% 107.6K 0.00% 618 [compiler.h:199 -> common.c:301] [kernel.vmlinux]
0.83% 46.3K 0.00% 409 [entry_64.S:153 -> entry_64.S:175] [kernel.vmlinux]
0.83% 46.1K 0.00% 83 [jump_label.h:41 -> tsc.c:230] [kernel.vmlinux]
0.64% 36.9K 0.01% 1.4K [hda_intel.c:904 -> hda_intel.c:916] [snd_hda_intel]
0.57% 30.2K 0.00% 282 [file.c:710 -> file.c:730] [kernel.vmlinux]
0.48% 25.8K 0.00% 82 [spinlock.c:158 -> spinlock.c:160] [kernel.vmlinux]
0.45% 23.7K 0.00% 369 [tick-broadcast.c:585 -> tick-broadcast.c:586] [kernel.vmlinux]
0.44% 24.4K 0.00% 73 [msr.h:236 -> tsc.c:1088] [kernel.vmlinux]
0.43% 22.7K 0.00% 144 [cpuidle.c:229 -> cpuidle.c:232] [kernel.vmlinux]
Then press 'A' or Enter on one of those lines, just like with 'perf top', say
the top one: [msr.h:105 -> msr.h:166], then this shows up:
Samples: 78K of event 'cycles', 4000 Hz, Event count (approx.): 78762
native_write_msr /lib/modules/5.4.0-rc8/build/vmlinux [Percent: local period]
Percent│ IPC Cycle (Average IPC: 0.02, IPC Coverage: 50.0%)
│
│ Disassembly of section .text:
│
│ ffffffff8106c480 <native_write_msr>:
│ __wrmsr():
│ return EAX_EDX_VAL(val, low, high);
│ }
│
│ static inline void notrace __wrmsr(unsigned int msr, u32 low, u32 high)
│ {
│ asm volatile("1: wrmsr\n"
49.16 │0.02 mov %edi,%ecx
│0.02 mov %esi,%eax
│0.02 wrmsr
│ arch_static_branch():
│ #include <linux/stringify.h>
│ #include <linux/types.h>
│
│ static __always_inline bool arch_static_branch(struct static_key *key, bool branch)
│ {
│ asm_volatile_goto("1:"
0.79 │0.02 nop
│ native_write_msr():
│ {
│ __wrmsr(msr, low, high);
│
│ if (msr_tracepoint_active(__tracepoint_write_msr))
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ }
50.05 │0.02 254 ← retq
│ do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
│ shl $0x20,%rdx
│ mov %esi,%esi
│ or %rdx,%rsi
│ xor %edx,%edx
│ → jmpq do_trace_write_msr
We need to improve this to show the source code line numbers in the
annotation view, so one can go from that program block to the annotation view
and see those source code line numbers straight away.
auxtrace/Intel PT:
Adrian Hunter:
- Add support for AUX area sampling, requires new functionality that
will land in 5.5, its already in tip.
This includes kernel capability querying so that it fails gracefully
with older kernels, duimping aux area samples in 'perf report -D' and
'perf script'.
perf.data:
Alexey Budankov:
- Fix decompression of PERF_RECORD_COMPRESSED records.
core:
Arnaldo Carvalho de Melo:
- Use the 'dcacheline' cmp routine to find the right DSOs taking into
account the 'maj', 'min', 'ino' and 'ino_generation', that got moved
from 'struct map' to 'struct dso', where it belongs.
This further reduces the size of 'struct map', there is still more
work to do to maybe get it to max one cacheline.
libtraceevent:
Hewenliang:
- Fix memory leakage in copy_filter_type().
Sudip Mukherjee:
- Fix header installation.
perf parse:
Ian Rogers :
- Fix potential memory leak when handling tracepoint errors, found using
LLVM's libFuzzer.
perf probe:
Colin Ian King:
- Fix spelling mistake "addrees" -> "address".
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Edward Cree says:
====================
A series of changes to how we check filters for expiry, manage how much
of that work to do & when, etc.
Prompted by some pathological behaviour under heavy load, which was
Reported-by: David Ahern <[email protected]>
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If there's no traffic on a channel, its ARFS expiry work will never get
scheduled by efx_poll() as that isn't being run.
So make efx_filter_rfs_expire() reschedule itself to run after 30 seconds.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Report the number of successful and failed insertions, and also the
current count of filters, to aid in tuning e.g. rps_flow_cnt.
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In high connection count usage, the NIC's filter table may be filled with
sufficiently many ARFS filters that further insertions fail. As this
does not represent a correctness issue, do not log the resulting MCDI
errors. Add a debug-level message under the (by default disabled)
rx_status category instead; and take the opportunity to do a little extra
expiry work.
Since there are now multiple workitems able to call __efx_filter_rfs_expire
on a given channel, it is possible for them to race and thus pass quotas
which, combined, exceed rfs_filter_count. Thus, don't WARN_ON if we loop
all the way around the table with quota left over.
Signed-off-by: Edward Cree <[email protected]>
Tested-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The old rfs_filters_added method for determining the quota could potentially
allow the NIC to become filled with old filters, which never get tested for
expiry. Instead, explicitly make expiry check work depend on the number of
filters installed, and don't count checking slots without filters in as
doing work. This guarantees that each filter will be checked for expiry at
least once every thirty seconds (assuming the channel to which it belongs is
NAPI polling actively) regardless of fill level.
Signed-off-by: Edward Cree <[email protected]>
Tested-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
This series contains updates to the ice driver only.
Bruce updates the driver to store the number of functions the device has
so that it won't have to compute it when setting safe mode capabilities.
Adds a check to adjust the reporting of capabilities for devices with
more than 4 ports, which differ for devices with less than 4 ports.
Brett adds a helper function to determine if the VF is allowed to do
VLAN operations based on the host's VF configuration. Also adds a new
function that initializes VLAN stripping (enabled/disabled) for the VF
based on the device supported capabilities. Adds a check if the vector
index is valid with the respect to the number of transmit and receive
queues configured when we set coalesce settings for DCB. Adds a check
if the promisc_mask contains ICE_PROMISC_VLAN_RX or ICE_PROMISC_VLAN_TX
so that VLAN 0 promiscuous rules to be removed. Add a helper macro for
a commonly used de-reference of a pointer to &pf->dev->pdev.
Jesse fixes an issue where if an invalid virtchnl request from the VF,
the driver would return uninitialized data to the VF from the PF stack,
so ensure the stack variable is initialized earlier. Add helpers to the
virtchnl interface make the reporting of strings consistent and help
reduce stack space. Implements VF statistics gathering via the kernel
ndo_get_vf_stats().
Akeem ensures we disable the state flag for each VF when its resources
are returned to the device.
Tony does additional cleanup in the driver to ensure the when we
allocate and free memory within the same function, we should not be
using devm_* variants; use regular alloc and free functions.
Henry implements code to query and set the number of channels on the
primary VSI for a PF via ethtool.
Jake cleans up needless NULL checks in ice_sched_cleanup_all().
Kevin updates the firmware API version to align with current NVM images.
v2: Added "Fixes:" tag to patch 5 commit description and added the use
of netif_is_rxfh_configured() in patch 13 to see if RSS has been
configured by the user, if so do not overwrite that configuration.
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"Just a single revert as RMI mode should not have been enabled for this
model [yet?]"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"
|
|
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Maciej Żenczykowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rahul Lakkireddy says:
====================
This series of patches add UDP Segmentation Offload (USO) supported
by Chelsio T5/T6 NICs.
Patch 1 updates the current Scatter Gather List (SGL) DMA unmap logic
for USO requests.
Patch 2 adds USO support for NIC and MQPRIO QoS offload Tx path.
Patch 3 adds missing stats for MQPRIO QoS offload Tx path.
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Export necessary stats for traffic flowing through MQPRIO QoS offload
Tx path.
v2:
- No change.
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Implement and export UDP segmentation offload (USO) support for both
NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to
parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to
perform USO.
v2:
- Remove inline keyword from write_eo_udp_wr() in sge.c. Let the
compiler decide.
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|