aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-23Merge tag 'riscv-firmware-fixes-for-v6.8-rc6' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes Microchip firmware driver fixes for v6.8-rc6 A single fix for me incorrectly using sizeof(). Signed-off-by: Conor Dooley <[email protected]> * tag 'riscv-firmware-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: firmware: microchip: fix wrong sizeof argument Link: https://lore.kernel.org/r/20240221-recognize-dust-4bb575f4e67b@spud Signed-off-by: Arnd Bergmann <[email protected]>
2024-02-23Merge tag 'riscv-cache-fixes-for-v6.8-rc6' of ↵Arnd Bergmann1-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V Cache driver fixes for v6.8-rc6 A single fix for an inconsistency reported during CIP review by Pavel in the newly added ax45mp cache driver. Signed-off-by: Conor Dooley <[email protected]> * tag 'riscv-cache-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback() Link: https://lore.kernel.org/r/20240221-keenness-handheld-b930aaa77708@spud Signed-off-by: Arnd Bergmann <[email protected]>
2024-02-23ps3/gelic: Fix SKB allocationGeoff Levand1-6/+6
Commit 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures") of 6.8-rc1 had a copy-and-paste error where the pointer that holds the allocated SKB (struct gelic_descr.skb) was set to NULL after the SKB was allocated. This resulted in a kernel panic when the SKB pointer was accessed. This fix moves the initialization of the gelic_descr to before the SKB is allocated. Reported-by: sambat goson <[email protected]> Fixes: 3ce4f9c3fbb3 ("net/ps3_gelic_net: Add gelic_descr structures") Signed-off-by: Geoff Levand <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-23net: dpaa: fman_memac: accept phy-interface-type = "10gbase-r" in the device ↵Vladimir Oltean1-9/+9
tree Since commit 5d93cfcf7360 ("net: dpaa: Convert to phylink"), we support the "10gbase-r" phy-mode through a driver-based conversion of "xgmii", but we still don't actually support it when the device tree specifies "10gbase-r" proper. This is because boards such as LS1046A-RDB do not define pcs-handle-names (for whatever reason) in the ethernet@f0000 device tree node, and the code enters through this code path: err = of_property_match_string(mac_node, "pcs-handle-names", "xfi"); // code takes neither branch and falls through if (err >= 0) { (...) } else if (err != -EINVAL && err != -ENODATA) { goto _return_fm_mac_free; } (...) /* For compatibility, if pcs-handle-names is missing, we assume this * phy is the first one in pcsphy-handle */ err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii"); if (err == -EINVAL || err == -ENODATA) pcs = memac_pcs_create(mac_node, 0); // code takes this branch else if (err < 0) goto _return_fm_mac_free; else pcs = memac_pcs_create(mac_node, err); // A default PCS is created and saved in "pcs" // This determination fails and mistakenly saves the default PCS // memac->sgmii_pcs instead of memac->xfi_pcs, because at this // stage, mac_dev->phy_if == PHY_INTERFACE_MODE_10GBASER. if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII) memac->xfi_pcs = pcs; else memac->sgmii_pcs = pcs; In other words, in the absence of pcs-handle-names, the default xfi_pcs assignment logic only works when in the device tree we have PHY_INTERFACE_MODE_XGMII. By reversing the order between the fallback xfi_pcs assignment and the "xgmii" overwrite with "10gbase-r", we are able to support both values in the device tree, with identical behavior. Currently, it is impossible to make the s/xgmii/10gbase-r/ device tree conversion, because it would break forward compatibility (new device tree with old kernel). The only way to modify existing device trees to phy-interface-mode = "10gbase-r" is to fix stable kernels to accept this value and handle it properly. One reason why the conversion is desirable is because with pre-phylink kernels, the Aquantia PHY driver used to warn about the improper use of PHY_INTERFACE_MODE_XGMII [1]. It is best to have a single (latest) device tree that works with all supported stable kernel versions. Note that the blamed commit does not constitute a regression per se. Older stable kernels like 6.1 still do not work with "10gbase-r", but for a different reason. That is a battle for another time. [1] https://lore.kernel.org/netdev/20240214-ls1046-dts-use-10gbase-r-v1-1-8c2d68547393@concurrent-rt.com/ Fixes: 5d93cfcf7360 ("net: dpaa: Convert to phylink") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Sean Anderson <[email protected]> Acked-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-23wifi: mac80211: only call drv_sta_rc_update for uploaded stationsFelix Fietkau1-1/+2
When a station has not been uploaded yet, receiving SMPS or channel width notification action frames can lead to rate_control_rate_update calling drv_sta_rc_update with uninitialized driver private data. Fix this by adding a missing check for sta->uploaded. Signed-off-by: Felix Fietkau <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-02-23LoongArch: KVM: Streamline kvm_check_cpucfg() and improve commentsWANG Xuerui1-22/+20
All the checks currently done in kvm_check_cpucfg can be realized with early returns, so just do that to avoid extra cognitive burden related to the return value handling. While at it, clean up comments of _kvm_get_cpucfg_mask() and kvm_check_cpucfg(), by removing comments that are merely restatement of the code nearby, and paraphrasing the rest so they read more natural for English speakers (that likely are not familiar with the actual Chinese- influenced grammar). No functional changes intended. Reviewed-by: Bibo Mao <[email protected]> Signed-off-by: WANG Xuerui <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()WANG Xuerui1-3/+3
The function is not actually a getter of guest CPUCFG, but rather validation of the input CPUCFG ID plus information about the supported bit flags of that CPUCFG leaf. So rename it to avoid confusion. Reviewed-by: Bibo Mao <[email protected]> Signed-off-by: WANG Xuerui <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()WANG Xuerui1-17/+18
The range check for the CPUCFG ID is wrong (should have been a || instead of &&) and useless in effect, so fix the obvious mistake. Furthermore, the juggling of the temp return value is unnecessary, because it is semantically equivalent and more readable to just return at every switch case's end. This is done too to avoid potential bugs in the future related to the unwanted complexity. Also, the return value of _kvm_get_cpucfg is meant to be checked, but this was not done, so bad CPUCFG IDs wrongly fall back to the default case and 0 is incorrectly returned; check the return value to fix the UAPI behavior. While at it, also remove the redundant range check in kvm_check_cpucfg, because out-of-range CPUCFG IDs are already rejected by the -EINVAL as returned by _kvm_get_cpucfg(). Fixes: db1ecca22edf ("LoongArch: KVM: Add LSX (128bit SIMD) support") Fixes: 118e10cd893d ("LoongArch: KVM: Add LASX (256bit SIMD) support") Reviewed-by: Bibo Mao <[email protected]> Signed-off-by: WANG Xuerui <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: dts: Minor whitespace cleanupKrzysztof Kozlowski2-2/+2
The DTS code coding style expects exactly one space before '{' character. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: Call early_init_fdt_scan_reserved_mem() earlierHuacai Chen1-2/+2
The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the arch_mem_init() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier in the init sequence, so that the reserved memory regions are set aside before any allocations are done using memblock. Cc: [email protected] Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table") Signed-off-by: Oreoluwa Babatunde <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: Update cpu_sibling_map when disabling nonboot CPUsHuacai Chen1-53/+68
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 Cc: [email protected] Signed-off-by: Huacai Chen <[email protected]>
2024-02-23LoongArch: Disable IRQ before init_fn() for nonboot CPUsHuacai Chen1-0/+1
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 Cc: [email protected] Signed-off-by: Huacai Chen <[email protected]>
2024-02-22net: mctp: take ownership of skb in mctp_local_outputJeremy Kerr2-2/+9
Currently, mctp_local_output only takes ownership of skb on success, and we may leak an skb if mctp_local_output fails in specific states; the skb ownership isn't transferred until the actual output routing occurs. Instead, make mctp_local_output free the skb on all error paths up to the route action, so it always consumes the passed skb. Fixes: 833ef3b91de6 ("mctp: Populate socket implementation") Signed-off-by: Jeremy Kerr <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22Merge branch '100GbE' of ↵Jakub Kicinski5-39/+161
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-02-20 (ice) This series contains updates to ice driver only. Yochai sets parent device to properly reflect connection state between source DPLL and output pin. Arkadiusz fixes additional issues related to DPLL; proper reporting of phase_adjust value and preventing use/access of data while resetting. Amritha resolves ASSERT_RTNL() being triggered on certain reset/rebuild flows. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix ASSERT_RTNL() warning during certain scenarios ice: fix pin phase adjust updates on PF reset ice: fix dpll periodic work data updates on PF reset ice: fix dpll and dpll_pin data access on PF reset ice: fix dpll input pin phase_adjust value updates ice: fix connection state of DPLL and out pin ==================== Reviewed-by: Vadim Fedorenko <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22net: ip_tunnel: prevent perpetual headroom growthFlorian Westphal1-7/+21
syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline] ___skb_get_hash net/core/flow_dissector.c:1791 [inline] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [inline] ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 ... The splat occurs because skb->data points past skb->head allocated area. This is because neigh layer does: __skb_pull(skb, skb_network_offset(skb)); ... but skb_network_offset() returns a negative offset and __skb_pull() arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value. The negative value is returned because skb->head and skb->data distance is more than 64k and skb->network_header (u16) has wrapped around. The bug is in the ip_tunnel infrastructure, which can cause dev->needed_headroom to increment ad infinitum. The syzkaller reproducer consists of packets getting routed via a gre tunnel, and route of gre encapsulated packets pointing at another (ipip) tunnel. The ipip encapsulation finds gre0 as next output device. This results in the following pattern: 1). First packet is to be sent out via gre0. Route lookup found an output device, ipip0. 2). ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future output device, rt.dev->needed_headroom (ipip0). 3). ip output / start_xmit moves skb on to ipip0. which runs the same code path again (xmit recursion). 4). Routing step for the post-gre0-encap packet finds gre0 as output device to use for ipip0 encapsulated packet. tunl0->needed_headroom is then incremented based on the (already bumped) gre0 device headroom. This repeats for every future packet: gre0->needed_headroom gets inflated because previous packets' ipip0 step incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0 needed_headroom was increased. For each subsequent packet, gre/ipip0->needed_headroom grows until post-expand-head reallocations result in a skb->head/data distance of more than 64k. Once that happens, skb->network_header (u16) wraps around when pskb_expand_head tries to make sure that skb_network_offset() is unchanged after the headroom expansion/reallocation. After this skb_network_offset(skb) returns a different (and negative) result post headroom expansion. The next trip to neigh layer (or anything else that would __skb_pull the network header) makes skb->data point to a memory location outside skb->head area. v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to prevent perpetual increase instead of dropping the headroom increment completely. Reported-and-tested-by: [email protected] Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ Fixes: 243aad830e8a ("ip_gre: include route header_len in max_headroom calculation") Signed-off-by: Florian Westphal <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22net: smsc95xx: add support for SYS TEC USB-SPEmodule1Andre Werner1-0/+5
This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pair. Signed-off-by: Andre Werner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22netlink: add nla be16/32 types to minlen arrayFlorian Westphal1-0/+4
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline] BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline] BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline] BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631 nla_validate_range_unsigned lib/nlattr.c:222 [inline] nla_validate_int_range lib/nlattr.c:336 [inline] validate_nla lib/nlattr.c:575 [inline] ... The message in question matches this policy: [NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255), but because NLA_BE32 size in minlen array is 0, the validation code will read past the malformed (too small) attribute. Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing: those likely should be added too. Reported-by: [email protected] Reported-by: xingwei lee <[email protected]> Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types") Signed-off-by: Florian Westphal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-22netlink: Fix kernel-infoleak-after-free in __skb_datagram_iterRyosuke Yasuoka1-1/+1
syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages_flush mm/mmu_gather.c:98 [inline] tlb_flush_mmu_free mm/mmu_gather.c:293 [inline] tlb_flush_mmu+0x6f5/0x980 mm/mmu_gather.c:300 tlb_finish_mmu+0x101/0x260 mm/mmu_gather.c:392 exit_mmap+0x49e/0xd30 mm/mmap.c:3321 __mmput+0x13f/0x530 kernel/fork.c:1349 mmput+0x8a/0xa0 kernel/fork.c:1371 exit_mm+0x1b8/0x360 kernel/exit.c:567 do_exit+0xd57/0x4080 kernel/exit.c:858 do_group_exit+0x2fd/0x390 kernel/exit.c:1021 __do_sys_exit_group kernel/exit.c:1032 [inline] __se_sys_exit_group kernel/exit.c:1030 [inline] __x64_sys_exit_group+0x3c/0x50 kernel/exit.c:1030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Bytes 3852-3903 of 3904 are uninitialized Memory access of size 3904 starts at ffff88812ea1e000 Data copied to user address 0000000020003280 CPU: 1 PID: 5043 Comm: syz-executor297 Not tainted 6.7.0-rc5-syzkaller-00047-g5bd7ef53ffe5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 Fixes: 1853c9496460 ("netlink, mmap: transform mmap skb into full skb on taps") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=34ad5fab48f7bf510349 [1] Signed-off-by: Ryosuke Yasuoka <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-23nouveau: add an ioctl to report vram usageDave Airlie2-0/+12
This reports the currently used vram allocations. userspace using this has been proposed for nvk, but it's a rather trivial uapi addition. Reviewed-by: Faith Ekstrand <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2024-02-23nouveau: add an ioctl to return vram bar size.Dave Airlie2-0/+11
This returns the BAR resources size so userspace can make decisions based on rebar support. userspace using this has been proposed for nvk, but it's a rather trivial uapi addition. Reviewed-by: Faith Ekstrand <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2024-02-23nouveau/gsp: add kconfig option to enable GSP paths by defaultDave Airlie2-1/+13
Turing and Ampere will continue to use the old paths by default, but we should allow distros to decide what the policy is. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-23Merge tag 'drm-xe-fixes-2024-02-22' of ↵Dave Airlie13-103/+28
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes UAPI Changes: - Remove support for persistent exec_queues - Drop a reduntant sysfs newline printout Cross-subsystem Changes: Core Changes: Driver Changes: - A three-patch fix for a VM_BIND rebind optimization path - Fix a modpost warning on an xe KUNIT module Signed-off-by: Dave Airlie <[email protected]> From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZdcsNrxdWMMM417v@fedora
2024-02-23Merge tag 'amd-drm-fixes-6.8-2024-02-22' of ↵Dave Airlie9-53/+71
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.8-2024-02-22: amdgpu: - Suspend/resume fixes - Backlight error fix - DCN 3.5 fixes - Misc fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-23Merge tag 'drm-intel-fixes-2024-02-22' of ↵Dave Airlie2-10/+10
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixup for TV mode Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-23Merge tag 'drm-misc-fixes-2024-02-22' of ↵Dave Airlie12-24/+39
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A list handling fix and 64bit division on 32bit platform fix for the drm/buddy allocator, a cast warning and an initialization fix for nouveau, a bridge handling fix for meson, an initialisation fix for ivpu, a SPARC build fix for fbdev, a double-free fix for ttm, and two fence handling fixes for syncobj. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/gl2antuifidtzn3dfm426p7xwh5fxj23behagwh26owfnosh2w@gqoa7vj5prnh
2024-02-22Merge tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linuxLinus Torvalds5-68/+54
Pull block fixes from Jens Axboe: "Mostly just fixlets for md, but also a sed-opal parsing fix" * tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux: block: sed-opal: handle empty atoms when parsing response md: Don't suspend the array for interrupted reshape md: Don't register sync_thread for reshape directly md: Make sure md_do_sync() will set MD_RECOVERY_DONE md: Don't ignore read-only array in md_check_recovery() md: Don't ignore suspended array in md_check_recovery() md: Fix missing release of 'active_io' for flush
2024-02-22Merge tag 'for-linus-iommufd' of ↵Linus Torvalds7-63/+210
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: - Fix dirty tracking bitmap collection when using reporting bitmaps that are not neatly aligned to u64's or match the IO page table radix tree layout. - Add self tests to cover the cases that were found to be broken. - Add missing enforcement of invalidation type in the uapi. - Fix selftest config generation * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: selftests/iommu: fix the config fragment iommufd: Reject non-zero data_type if no data_len is provided iommufd/iova_bitmap: Consider page offset for the pages to be pinned iommufd/selftest: Add mock IO hugepages tests iommufd/selftest: Hugepage mock domain support iommufd/selftest: Refactor mock_domain_read_and_clear_dirty() iommufd/selftest: Refactor dirty bitmap tests iommufd/iova_bitmap: Handle recording beyond the mapped pages iommufd/selftest: Test u64 unaligned bitmaps iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array iommufd/iova_bitmap: Bounds check mapped::pages access
2024-02-22Merge tag 'platform-drivers-x86-v6.8-3' of ↵Linus Torvalds13-97/+182
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Regression fixes: - Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI changes - AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend - x86-android-tablets: Fix touchscreen no longer working on Lenovo Yogabook - x86-android-tablets: Fix serdev instantiation regression - intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending Bug fixes: - think-lmi: Fix changing BIOS settings on Lenovo workstations - touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing - AMD-PMF: Fix Smart PC support not working after suspend/resume Other misc small fixes" * tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: Only update profile if successfully converted platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name platform/x86: x86-android-tablets: Fix serdev instantiation no longer working platform/x86: Add new get_serdev_controller() helper platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90 platform/x86/amd/pmf: Fix a potential race with policy binary sideload platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc() platform/x86/amd/pmf: Add debugging message for missing policy data platform/x86/amd/pmf: Fix a suspend hang on Framework 13 platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume platform/x86/amd/pmf: Remove smart_pc_status enum platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq() platform/x86: think-lmi: Fix password opcode ordering for workstations
2024-02-22Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Here are some Samsung clk driver fixes I've been sitting on for far too long. They fix the bindings and clk driver for the Google GS101 SoC" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names dt-bindings: clock: gs101: rename cmu_misc clock-names
2024-02-22Merge tag 'vfs-6.8-rc6.fixes' of ↵Linus Torvalds11-19/+32
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix a memory leak in cachefiles - Restrict aio cancellations to I/O submitted through the aio interfaces as this is otherwise causing issues for I/O submitted via io_uring - Increase buffer for afs volume status to avoid overflow - Fix a missing zero-length check in unbuffered writes in the netfs library. If generic_write_checks() returns zero make netfs_unbuffered_write_iter() return right away - Prevent a leak in i_dio_count caused by netfs_begin_read() operating past i_size. It will return early and leave i_dio_count incremented - Account for ipv4 addresses as well as ipv6 addresses when processing incoming callbacks in afs * tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio afs: Increase buffer size in afs_update_volume_status() afs: Fix ignored callbacks over ipv4 cachefiles: fix memory leak in cachefiles_add_cache() netfs: Fix missing zero-length check in unbuffered write netfs: Fix i_dio_count leak on DIO read past i_size
2024-02-22Merge tag 'net-6.8.0-rc6' of ↵Linus Torvalds75-378/+870
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf and netfilter. Current release - regressions: - af_unix: fix another unix GC hangup Previous releases - regressions: - core: fix a possible AF_UNIX deadlock - bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready() - netfilter: nft_flow_offload: release dst in case direct xmit path is used - bridge: switchdev: ensure MDB events are delivered exactly once - l2tp: pass correct message length to ip6_append_data - dccp/tcp: unhash sk from ehash for tb2 alloc failure after check_estalblished() - tls: fixes for record type handling with PEEK - devlink: fix possible use-after-free and memory leaks in devlink_init() Previous releases - always broken: - bpf: fix an oops when attempting to read the vsyscall page through bpf_probe_read_kernel - sched: act_mirred: use the backlog for mirred ingress - netfilter: nft_flow_offload: fix dst refcount underflow - ipv6: sr: fix possible use-after-free and null-ptr-deref - mptcp: fix several data races - phonet: take correct lock to peek at the RX queue Misc: - handful of fixes and reliability improvements for selftests" * tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) l2tp: pass correct message length to ip6_append_data net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY selftests: ioam: refactoring to align with the fix Fix write to cloned skb in ipv6_hop_ioam() phonet/pep: fix racy skb_queue_empty() use phonet: take correct lock to peek at the RX queue net: sparx5: Add spinlock for frame transmission from CPU net/sched: flower: Add lock protection when remove filter handle devlink: fix port dump cmd type net: stmmac: Fix EST offset for dwmac 5.10 tools: ynl: don't leak mcast_groups on init error tools: ynl: make sure we always pass yarg to mnl_cb_run net: mctp: put sock on tag allocation failure netfilter: nf_tables: use kzalloc for hook allocation netfilter: nf_tables: register hooks last when adding new chain/flowtable netfilter: nft_flow_offload: release dst in case direct xmit path is used netfilter: nft_flow_offload: reset dst in route object after setting up flow netfilter: nf_tables: set dormant flag on hook register failure selftests: tls: add test for peeking past a record of a different type selftests: tls: add test for merging of same-type control messages ...
2024-02-22drm/amdgpu: Fix the runtime resume failure issueMa Jun1-0/+3
Don't set power state flag when system enter runtime suspend, or it may cause runtime resume failure issue. Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by: Ma Jun <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2024-02-22drm/amd/display: fix null-pointer dereference on edid readingMelissa Wen1-4/+15
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by: Melissa Wen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Fix memory leak in dm_sw_fini()Armin Wolf1-0/+1
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: fix input states translation error for dcn35 & dcn351Swapnil Patel1-1/+8
[Why] Currently there is an error while translating input clock sates into output clock states. The highest fclk setting from output sates is being dropped because of this error. [How] For dcn35 and dcn351, make output_states equal to input states. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Swapnil Patel <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Fix potential null pointer dereference in dc_dmub_srvSrinivasan Shanmugam1-2/+5
Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions. In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it. Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced. Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164) Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity") Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB") Cc: JinZe.Xu <[email protected]> Cc: Hersen Wu <[email protected]> Cc: Josip Pavic <[email protected]> Cc: Roman Li <[email protected]> Cc: Qingqing Zhuo <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Tom Chung <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Tom Chung <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22Merge tag 'trace-v6.8-rc5' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: - While working on the ring buffer I noticed that the counter used for knowing where the end of the data is on a sub-buffer was not a full "int" but just 20 bits. It was masked out to 0xfffff. With the new code that allows the user to change the size of the sub-buffer, it is theoretically possible to ask for a size bigger than 2^20. If that happens, unexpected results may occur as there's no code checking if the counter overflowed the 20 bits of the write mask. There are other checks to make sure events fit in the sub-buffer, but if the sub-buffer itself is too big, that is not checked. Add a check in the resize of the sub-buffer to make sure that it never goes beyond the size of the counter that holds how much data is on it. * tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Do not let subbuf be bigger than write mask
2024-02-22drm/amd/display: Only allow dig mapping to pwrseq in new asicLewis Huang5-27/+21
[Why] The old asic only have 1 pwrseq hw. We don't need to map the diginst to pwrseq inst in old asic. [How] 1. Only mapping dig to pwrseq for new asic. 2. Move mapping function into dcn specific panel control component Cc: Stable <[email protected]> # v6.6+ Cc: Mario Limonciello <[email protected]> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122 Reviewed-by: Anthony Koo <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Lewis Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: adjust few initialization order in dmWayne Lin1-19/+18
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted: 1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message. 2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence [How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that. Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device() Cc: Stable <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Wayne Lin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22s390/cio: fix invalid -EBUSY on ccw_device_startPeter Oberparleiter1-3/+3
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code when drivers try to start I/O while a path-verification (PV) process is pending. This can lead to failed device initialization attempts with symptoms like broken network connectivity after boot. Fix this by replacing the -EBUSY return code with a deferred condition code 1 reply to make path-verification handling consistent from a driver's point of view. The problem can be reproduced semi-regularly using the following process, while repeating steps 2-3 as necessary (example assumes an OSA device with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02): 1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group 2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online 3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \ echo on > /sys/devices/css0/chp0.02/status Background information: The common I/O layer starts path-verification I/Os when it receives indications about changes in a device path's availability. This occurs for example when hardware events indicate a change in channel-path status, or when a manual operation such as a CHPID vary or configure operation is performed. If a driver attempts to start I/O while a PV is running, CIO reports a successful I/O start (ccw_device_start() return code 0). Then, after completion of PV, CIO synthesizes an interrupt response that indicates an asynchronous status condition that prevented the start of the I/O (deferred condition code 1). If a PV indication arrives while a device is busy with driver-owned I/O, PV is delayed until after I/O completion was reported to the driver's interrupt handler. To ensure that PV can be started eventually, CIO reports a device busy condition (ccw_device_start() return code -EBUSY) if a driver tries to start another I/O while PV is pending. In some cases this -EBUSY return code causes device drivers to consider a device not operational, resulting in failed device initialization. Note: The code that introduced the problem was added in 2003. Symptoms started appearing with the following CIO commit that causes a PV indication when a device is removed from the cio_ignore list after the associated parent subchannel device was probed, but before online processing of the CCW device has started: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") During boot, the cio_ignore list is modified by the cio_ignore dracut module [1] as well as Linux vendor-specific systemd service scripts[2]. When combined, this commit and boot scripts cause a frequent occurrence of the problem during boot. [1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore [2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service Cc: [email protected] # v5.15+ Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Tested-By: Thorsten Winkler <[email protected]> Reviewed-by: Thorsten Winkler <[email protected]> Signed-off-by: Peter Oberparleiter <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2024-02-22selftests/iommu: fix the config fragmentMuhammad Usama Anjum1-2/+3
The config fragment doesn't follow the correct format to enable those config options which make the config options getting missed while merging with other configs. ➜ merge_config.sh -m .config tools/testing/selftests/iommu/config Using .config as base Merging tools/testing/selftests/iommu/config ➜ make olddefconfig .config:5295:warning: unexpected data: CONFIG_IOMMUFD .config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST While at it, add CONFIG_FAULT_INJECTION as well which is needed for CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled. Fixes: 57f0988706fe ("iommufd: Add a selftest") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2024-02-22drm/syncobj: handle NULL fence in syncobj_eventfd_entry_funcErik Kurzinger1-1/+12
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set the fence to NULL if the given seqno is signaled and a later seqno has already been submitted. In that case, the eventfd should be signaled immediately which currently does not happen. This is a similar issue to the one addressed by commit b19926d4f3a6 ("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence."). As a fix, if the return value of dma_fence_chain_find_seqno indicates success but it sets the fence to NULL, we will assign a stub fence to ensure the following code still signals the eventfd. v1 -> v2: assign a stub fence instead of signaling the eventfd Signed-off-by: Erik Kurzinger <[email protected]> Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: Simon Ser <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-22iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlockJason Gunthorpe1-26/+12
If the SMMU is configured to use a two level CD table then arm_smmu_write_ctx_desc() allocates a CD table leaf internally using GFP_KERNEL. Due to recent changes this is being done under a spinlock to iterate over the device list - thus it will trigger a sleeping while atomic warning: arm_smmu_sva_set_dev_pasid() mutex_lock(&sva_lock); __arm_smmu_sva_bind() arm_smmu_mmu_notifier_get() spin_lock_irqsave() arm_smmu_write_ctx_desc() arm_smmu_get_cd_ptr() arm_smmu_alloc_cd_leaf_table() dmam_alloc_coherent(GFP_KERNEL) This is a 64K high order allocation and really should not be done atomically. At the moment the rework of the SVA to follow the new API is half finished. Recently the CD table memory was moved from the domain to the master, however we have the confusing situation where the SVA code is wrongly using the RID domains device's list to track which CD tables the SVA is installed in. Remove the logic to replicate the CD across all the domain's masters during attach. We know which master and which CD table the PASID should be installed in. Right now SVA only works when dma-iommu.c is in control of the RID translation, which means we have a single iommu_domain shared across the entire group and that iommu_domain is not shared outside the group. Critically this means that the iommu_group->devices list and RID's smmu_domain->devices list describe the same set of masters. For PCI cases the core code also insists on singleton groups so there is only one entry in the smmu_domain->devices list that is equal to the master being passed in to arm_smmu_sva_set_dev_pasid(). Only non-PCI cases may have multi-device groups. However, the core code will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire iommu_group->devices list. Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the devices in the group via the RID's smmu_domain, rely on __arm_smmu_sva_bind() to be called for each device in the group and install the repeated CD entry that way. This avoids taking the spinlock to access the devices list and permits the arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the arm_smmu_mm_release() as a confusing situation, this requires tracking attached masters inside the SVA domain. Removing the loop allows arm_smmu_write_ctx_desc() to be called outside the spinlock and thus is safe to use GFP_KERNEL. Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that arm_smmu_mmu_notifier_get/put() remain paired functions. Fixes: 24503148c545 ("iommu/arm-smmu-v3: Refactor write_ctx_desc") Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jason Gunthorpe <[email protected]> Reviewed-by: Michael Shavit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2024-02-22spi: cadence-qspi: add system-wide suspend and resume callbacksThéo Lebrun1-2/+18
Each SPI controller is expected to call the spi_controller_suspend() and spi_controller_resume() callbacks at system-wide suspend and resume. It (1) handles the kthread worker for queued controllers and (2) marks the controller as suspended to have spi_sync() fail while the controller is unavailable. Those two operations do not require the controller to be active, we do not need to increment the runtime PM usage counter. Signed-off-by: Théo Lebrun <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-22spi: cadence-qspi: put runtime in runtime PM hooks namesThéo Lebrun1-4/+4
Follow kernel naming convention with regards to power-management callback function names. The convention in the kernel is: - prefix_suspend means the system-wide suspend callback; - prefix_runtime_suspend means the runtime PM suspend callback. The same applies to resume callbacks. Signed-off-by: Théo Lebrun <[email protected]> Reviewed-by: Dhruva Gole <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-22spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooksThéo Lebrun1-7/+2
The ->runtime_suspend() and ->runtime_resume() callbacks are not expected to call spi_controller_suspend() and spi_controller_resume(). Remove calls to those in the cadence-qspi driver. Those helpers have two roles currently: - They stop/start the queue, including dealing with the kworker. - They toggle the SPI controller SPI_CONTROLLER_SUSPENDED flag. It requires acquiring ctlr->bus_lock_mutex. Step one is irrelevant because cadence-qspi is not queued. Step two however has two implications: - A deadlock occurs, because ->runtime_resume() is called in a context where the lock is already taken (in the ->exec_op() callback, where the usage count is incremented). - It would disallow all operations once the device is auto-suspended. Here is a brief call tree highlighting the mutex deadlock: spi_mem_exec_op() ... spi_mem_access_start() mutex_lock(&ctlr->bus_lock_mutex) cqspi_exec_mem_op() pm_runtime_resume_and_get() cqspi_resume() spi_controller_resume() mutex_lock(&ctlr->bus_lock_mutex) ... spi_mem_access_end() mutex_unlock(&ctlr->bus_lock_mutex) ... Fixes: 0578a6dbfe75 ("spi: spi-cadence-quadspi: add runtime pm support") Signed-off-by: Théo Lebrun <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-22spi: cadence-qspi: fix pointer reference in runtime PM hooksThéo Lebrun1-4/+2
dev_get_drvdata() gets used to acquire the pointer to cqspi and the SPI controller. Neither embed the other; this lead to memory corruption. On a given platform (Mobileye EyeQ5) the memory corruption is hidden inside cqspi->f_pdata. Also, this uninitialised memory is used as a mutex (ctlr->bus_lock_mutex) by spi_controller_suspend(). Fixes: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Reviewed-by: Dhruva Gole <[email protected]> Signed-off-by: Théo Lebrun <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-02-22drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is setErik Kurzinger1-2/+4
When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled. However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have. To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately. IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html v1 -> v2: adjust lockdep_assert_none_held_once condition (cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df) Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <[email protected]> Signed-off-by: Simon Ser <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Simon Ser <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-02-22btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserveFilipe Manana2-1/+17
At btrfs_use_block_rsv() we read the size of a block reserve without locking its spinlock, which makes KCSAN complain because the size of a block reserve is always updated while holding its spinlock. The report from KCSAN is the following: [653.313148] BUG: KCSAN: data-race in btrfs_update_delayed_refs_rsv [btrfs] / btrfs_use_block_rsv [btrfs] [653.314755] read to 0x000000017f5871b8 of 8 bytes by task 7519 on cpu 0: [653.314779] btrfs_use_block_rsv+0xe4/0x2f8 [btrfs] [653.315606] btrfs_alloc_tree_block+0xdc/0x998 [btrfs] [653.316421] btrfs_force_cow_block+0x220/0xe38 [btrfs] [653.317242] btrfs_cow_block+0x1ac/0x568 [btrfs] [653.318060] btrfs_search_slot+0xda2/0x19b8 [btrfs] [653.318879] btrfs_del_csums+0x1dc/0x798 [btrfs] [653.319702] __btrfs_free_extent.isra.0+0xc24/0x2028 [btrfs] [653.320538] __btrfs_run_delayed_refs+0xd3c/0x2390 [btrfs] [653.321340] btrfs_run_delayed_refs+0xae/0x290 [btrfs] [653.322140] flush_space+0x5e4/0x718 [btrfs] [653.322958] btrfs_preempt_reclaim_metadata_space+0x102/0x2f8 [btrfs] [653.323781] process_one_work+0x3b6/0x838 [653.323800] worker_thread+0x75e/0xb10 [653.323817] kthread+0x21a/0x230 [653.323836] __ret_from_fork+0x6c/0xb8 [653.323855] ret_from_fork+0xa/0x30 [653.323887] write to 0x000000017f5871b8 of 8 bytes by task 576 on cpu 3: [653.323906] btrfs_update_delayed_refs_rsv+0x1a4/0x250 [btrfs] [653.324699] btrfs_add_delayed_data_ref+0x468/0x6d8 [btrfs] [653.325494] btrfs_free_extent+0x76/0x120 [btrfs] [653.326280] __btrfs_mod_ref+0x6a8/0x6b8 [btrfs] [653.327064] btrfs_dec_ref+0x50/0x70 [btrfs] [653.327849] walk_up_proc+0x236/0xa50 [btrfs] [653.328633] walk_up_tree+0x21c/0x448 [btrfs] [653.329418] btrfs_drop_snapshot+0x802/0x1328 [btrfs] [653.330205] btrfs_clean_one_deleted_snapshot+0x184/0x238 [btrfs] [653.330995] cleaner_kthread+0x2b0/0x2f0 [btrfs] [653.331781] kthread+0x21a/0x230 [653.331800] __ret_from_fork+0x6c/0xb8 [653.331818] ret_from_fork+0xa/0x30 So add a helper to get the size of a block reserve while holding the lock. Reading the field while holding the lock instead of using the data_race() annotation is used in order to prevent load tearing. Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2024-02-22btrfs: fix data races when accessing the reserved amount of block reservesFilipe Manana2-13/+29
At space_info.c we have several places where we access the ->reserved field of a block reserve without taking the block reserve's spinlock first, which makes KCSAN warn about a data race since that field is always updated while holding the spinlock. The reports from KCSAN are like the following: [117.193526] BUG: KCSAN: data-race in btrfs_block_rsv_release [btrfs] / need_preemptive_reclaim [btrfs] [117.195148] read to 0x000000017f587190 of 8 bytes by task 6303 on cpu 3: [117.195172] need_preemptive_reclaim+0x222/0x2f0 [btrfs] [117.195992] __reserve_bytes+0xbb0/0xdc8 [btrfs] [117.196807] btrfs_reserve_metadata_bytes+0x4c/0x120 [btrfs] [117.197620] btrfs_block_rsv_add+0x78/0xa8 [btrfs] [117.198434] btrfs_delayed_update_inode+0x154/0x368 [btrfs] [117.199300] btrfs_update_inode+0x108/0x1c8 [btrfs] [117.200122] btrfs_dirty_inode+0xb4/0x140 [btrfs] [117.200937] btrfs_update_time+0x8c/0xb0 [btrfs] [117.201754] touch_atime+0x16c/0x1e0 [117.201789] filemap_read+0x674/0x728 [117.201823] btrfs_file_read_iter+0xf8/0x410 [btrfs] [117.202653] vfs_read+0x2b6/0x498 [117.203454] ksys_read+0xa2/0x150 [117.203473] __s390x_sys_read+0x68/0x88 [117.203495] do_syscall+0x1c6/0x210 [117.203517] __do_syscall+0xc8/0xf0 [117.203539] system_call+0x70/0x98 [117.203579] write to 0x000000017f587190 of 8 bytes by task 11 on cpu 0: [117.203604] btrfs_block_rsv_release+0x2e8/0x578 [btrfs] [117.204432] btrfs_delayed_inode_release_metadata+0x7c/0x1d0 [btrfs] [117.205259] __btrfs_update_delayed_inode+0x37c/0x5e0 [btrfs] [117.206093] btrfs_async_run_delayed_root+0x356/0x498 [btrfs] [117.206917] btrfs_work_helper+0x160/0x7a0 [btrfs] [117.207738] process_one_work+0x3b6/0x838 [117.207768] worker_thread+0x75e/0xb10 [117.207797] kthread+0x21a/0x230 [117.207830] __ret_from_fork+0x6c/0xb8 [117.207861] ret_from_fork+0xa/0x30 So add a helper to get the reserved amount of a block reserve while holding the lock. The value may be not be up to date anymore when used by need_preemptive_reclaim() and btrfs_preempt_reclaim_metadata_space(), but that's ok since the worst it can do is cause more reclaim work do be done sooner rather than later. Reading the field while holding the lock instead of using the data_race() annotation is used in order to prevent load tearing. Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.