Age | Commit message (Collapse) | Author | Files | Lines |
|
In order to correctly report monitor connected status changes, the
previous monitor status must be recorded in the connector->status
value instead of being discarded.
Signed-off-by: Keith Packard <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
When setting a new crtc configuration, force the DPMS state of all
connectors to ON. Otherwise, they'll be left at OFF and a future mode set
that disables the specified connector will not turn the connector off.
Signed-off-by: Keith Packard <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
clk_get() returns ERR_PTR() on error, not NULL.
Signed-off-by: Vasiliy Kulikov <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
|
|
Current clk_ops doesn't support .init which
is used to select external clock on ecovec
without CONFIG_SH_CLK_CPG_LEGACY.
To solve this problem, this patch add div6_reparent_clks
to clock-sh7724.
This patch solve compile error too.
Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Paul Mundt <[email protected]>
|
|
In commit 58933c64(ucc_geth: Fix the wrong the Rx/Tx FIFO size),
the UCC_GETH_UTFTT_INIT is set to 512 based on the recommendation
of the QE Reference Manual. But that will sometimes cause tx halt
while working in half duplex mode.
According to errata draft QE_GENERAL-A003(High Tx Virtual FIFO
threshold size can cause UCC to halt), setting UTFTT less than
[(UTFS x (M - 8)/M) - 128] will prevent this from happening
(M is the minimum buffer size).
The patch changes UTFTT back to 256.
Signed-off-by: Li Yang <[email protected]>
Cc: Jean-Denis Boyer <[email protected]>
Cc: Andreas Schmitz <[email protected]>
Cc: Anton Vorontsov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
inet sockets corresponding to passive connections are added to the bind hash
using ___inet_inherit_port(). These sockets are later removed from the bind
hash using __inet_put_port(). These two functions are not exactly symmetrical.
__inet_put_port() decrements hashinfo->bsockets and tb->num_owners, whereas
___inet_inherit_port() does not increment them. This results in both of these
going to -ve values.
This patch fixes this by calling inet_bind_hash() from ___inet_inherit_port(),
which does the right thing.
'bsockets' and 'num_owners' were introduced by commit a9d8f9110d7e953c
(inet: Allowing more than 64k connections and heavily optimize bind(0))
Signed-off-by: Nagendra Singh Tomar <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Acked-by: Evgeniy Polyakov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds some debug information about ehea not being able to
allocate enough spaces. Also it correctly updates the amount of available
skb.
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The new DIO bio splitting code has problems when the bio
spans more than one ordered extent. This will happen as the
generic DIO code merges our get_blocks calls together into
a bigger single bio.
This fixes things by walking forward in the ordered extent
code finding all the overlapping ordered extents and completing them
all at once.
Signed-off-by: Chris Mason <[email protected]>
|
|
This avoids some include-file hell, and the function isn't really
important enough to be inlined anyway.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
And in particular, use it in 'pipe_fcntl()'.
The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.
The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called. But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.
Cc: Jens Axboe <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Dave Jones <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
.. and change it to take the 'file' pointer instead of an inode, since
that's what all users want anyway.
The renaming is preparatory to exporting it to other users. The old
'pipe_info()' name was too generic and is already used elsewhere, so
before making the function public we need to use a more specific name.
Cc: Jens Axboe <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Dave Jones <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix the software context switch counter
perf, x86: Fixup Kconfig deps
x86, perf, nmi: Disable perf if counters are not accessible
perf: Fix inherit vs. context rotation bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: net: throttle TX queue before running out of tlabels
firewire: net: replace lists by counters
firewire: net: fix memory leaks
firewire: net: count stats.tx_packets and stats.tx_bytes
|
|
The HSO driver incorrectly creates a serial device instead of a net
device when disable_net is set. It shouldn't create anything for the
network interface.
Signed-off-by: Filip Aben <[email protected]>
Reported-by: Piotr Isajew <[email protected]>
Reported-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We register lapb when tty is created, but unregister it only when the
device is UP. So move the lapb_unregister to x25_asy_close_tty after
the device is down.
The old behaviour causes ldisc switching to fail each second attempt,
because we noted for us that the device is unused, so we use it the
second time, but labp layer still have it registered, so it fails
obviously.
Signed-off-by: Jiri Slaby <[email protected]>
Reported-by: Sergey Lapin <[email protected]>
Cc: Andrew Hendry <[email protected]>
Tested-by: Sergey Lapin <[email protected]>
Tested-by: Mikhail Ulyanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We were truncating the number of unicast and multicast MAC addresses
supported. Additionally, we were incorrectly computing the MAC Address
hash (a "1 << N" where we needed a "1ULL << N").
Signed-off-by: Casey Leedom <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allocating unit from ird might return several error codes
not only -EAGAIN, so it should not be changed and returned
precisely. Same time unit release procedure should be invoked
only if device is unregistering.
Signed-off-by: Cyrill Gorcunov <[email protected]>
CC: Paul Mackerras <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A single uninitialized padding byte is leaked to userspace.
Signed-off-by: Dan Rosenberg <[email protected]>
CC: stable <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
"aup->enable" holds already the address pointing to the MAC enable
register. The bug was introduced by commit d0e7cb:
"au1000-eth: remove volatiles, switch to I/O accessors".
CC: Florian Fainelli <[email protected]>
Signed-off-by: Wolfgang Grandegger <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This fixes a bug in updating the Greatest Acknowledgment number Received (GAR):
the current implementation does not track the greatest received value -
lower values in the range AWL..AWH (RFC 4340, 7.5.1) erase higher ones.
Signed-off-by: Gerrit Renker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
|
|
tcp_win_from_space() does the following:
if (sysctl_tcp_adv_win_scale <= 0)
return space >> (-sysctl_tcp_adv_win_scale);
else
return space - (space >> sysctl_tcp_adv_win_scale);
"space" is int.
As per C99 6.5.7 (3) shifting int for 32 or more bits is
undefined behaviour.
Indeed, if sysctl_tcp_adv_win_scale is exactly 32,
space >> 32 equals space and function returns 0.
Which means we busyloop in tcp_fixup_rcvbuf().
Restrict net.ipv4.tcp_adv_win_scale to [-31, 31].
Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312
Steps to reproduce:
echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale
wget www.kernel.org
[softlockup]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We don't track gpu flush request in any special way. So even with
obj->write_domain == 0, a gpu flush might be outstanding but no
yet executed. Even worse, the latest request might use the object
only for reading. So and unconditional call to object_wait_rendering
is needed for !pipelined.
Hence revert that patch fully and untangle the flushing from the
synchronization again.
Reported-by: Keith Packard <[email protected]>
Tested-by: Keith Packard <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
|
|
The /proc/net/tcp leaks openreq sockets from other namespaces.
Signed-off-by: Pavel Emelyanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove the if and else conditional because the code is in mainline and there
is no need in it being there.
Signed-off-by: Tracey Dent <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (30 commits)
ALSA: hda - Use ALC_INIT_DEFAULT for really default initialization
ASoC: Fix resource reclaim for osk5912
ASoC: tlv320aic3x - fix variable may be used uninitialized warning
ASoC: davinci-vcif - fix a memory leak
ASoC: phycore-ac97: fix resource leak
ASoC: imx-ssi: fix resource leak
ASoC: simone: fix resource leak in simone_init error path
ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error path
ASoC: snd-soc-afeb9260: remove unneeded platform_device_del in error path
ASoC: pcm030-audio-fabric: fix resource leak in pcm030_fabric_init error path
ASoC: efika-audio-fabric: fix resource leak in efika_fabric_init error path
ASoC: Call snd_soc_unregister_dais instead of snd_soc_unregister_dai in sh4_soc_dai_remove
ASoC: fix SND_PXA2XX_LIB Kconfig warning
ALSA: hda - Fix ALC660-VD/ALC861-VD capture/playback mixers
ALSA: HDA: Add an extra DAC for Realtek ALC887-VD
ASoC: nuc900-ac97: fix a memory leak
ASoC: Return proper error for omap3pandora_soc_init
ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000
ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal mode
ALSA: hda - Fix Acer 7730G support
...
|
|
There is a problem with how we use sget, it searches through the list of supers
attached to the fs_type looking for a super with the same fs_devices as what
we're trying to mount. This depends on sb->s_fs_info being filled, but we don't
fill that in until we get to btrfs_fill_super, so we could hit supers on the
fs_type super list that have a null s_fs_info. In order to fix that we need to
go ahead and setup a blank root with a blank fs_info to hold fs_devices, that
way our test will work out right and then we can set s_fs_info in
btrfs_set_super, and then open_ctree will simply use our pre-allocated root and
fs_info when setting everything up. Thanks,
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
There are two big problems currently with FIEMAP
1) We return extents for holes. This isn't supposed to happen, we just don't
return extents for holes and then userspace interprets the lack of an extent as
a hole.
2) We sometimes don't set FIEMAP_EXTENT_LAST properly. This is because we wait
to see a EXTENT_FLAG_VACANCY flag on the em, but this won't happen if say we ask
fiemap to map up to the last extent in a file, and there is nothing but holes up
to the i_size. To fix this we need to lookup the last extent in this file and
save the logical offset, so if we happen to try and map that extent we can be
sure to set FIEMAP_EXTENT_LAST.
With this patch we now pass xfstest 225, which we never have before.
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
When mounting a btrfs file system btrfs_test_super() may attempt to
use sb->s_fs_info, the btrfs root, of a super block that is going away
and that has had the btrfs root set to NULL in its ->put_super(). But
if the super block is going away it cannot be an existing super block
so we can return false in this case.
Signed-off-by: Ian Kent <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
Currently we fail xfstest 236 because we're not updating the inode ctime on
link. This is a simple fix, and makes it so we pass 236 now.
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
We have been failing xfstest 228 forever, because we don't check to make sure
the new inode size is acceptable as far as RLIMIT is concerned. Just check to
make sure it's ok to create a inode with this new size and error out if not.
With this patch we now pass 228.
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
There is a typo in __btrfs_prealloc_file_range() where we set the i_size to
actual_len/cur_offset, and then just set it to cur_offset again, and do the same
with btrfs_ordered_update_i_size(). This fixes it back to keeping i_size in a
local variable and then updating i_size properly. Tested this with
xfs_io -F -f -c "falloc 0 1" -c "pwrite 0 1" foo
stat'ing foo gives us a size of 1 instead of 4096 like it was. Thanks,
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure we return the dirent->d_type when it is known
NFS: Correct the array bound calculation in nfs_readdir_add_to_array
NFS: Don't ignore errors from nfs_do_filldir()
NFS: Fix the error handling in "uncached_readdir()"
NFS: Fix a page leak in uncached_readdir()
NFS: Fix a page leak in nfs_do_filldir()
NFS: Assume eof if the server returns no readdir records
NFS: Buffer overflow in ->decode_dirent() should not be fatal
Pure nfs client performance using odirect.
SUNRPC: Fix an infinite loop in call_refresh/call_refreshresult
|
|
* 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: release locks in check_corruption
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
posix-cpu-timers: Rcu_read_lock/unlock protect find_task_by_vpid call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
x86-64: Fix and clean up AMD Fam10 MMCONF enabling
x86: UV: Address interrupt/IO port operation conflict
x86: Use online node real index in calulate_tbl_offset()
x86, asm: Fix binutils 2.15 build failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf symbols: Remove incorrect open-coded container_of()
perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
x86/kprobes: Prevent kprobes to probe on save_args()
irq_work: Drop cmpxchg() result
perf: Fix owner-list vs exit
x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
tracing: Fix recursive user stack trace
perf,hw_breakpoint: Initialize hardware api earlier
x86: Ignore trap bits on single step exceptions
tracing: Force arch_local_irq_* notrace for paravirt
tracing: Fix module use of trace_bprintk()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix idle balancing
sched: Fix volanomark performance regression
|
|
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] qdio: free indicator after reset is finished
[S390] nmi: fix clock comparator revalidation
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
cciss: fix build for PROC_FS disabled
block: fix amiga and atari floppy driver compile warning
blk-throttle: Fix calculation of max number of WRITES to be dispatched
ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
xen/blkfront: change blk_shadow.request to proper pointer
xen/blkfront: map REQ_FLUSH into a full barrier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.
ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks
ARM: mach-shmobile: clock-sh7372: modify error code
ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642
ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI
ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable
ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: sdhci: 8-bit bus width changes
mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD
mmc: sdio: fix nasty oops in mmc_sdio_detect
mmc: omap4: hsmmc: Fix improper card detection while booting
mmc: fix rmmod race for hosts using card-detection polling
mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms
mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35
mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
mmc: sdhci: Properly enable SDIO IRQ wakeups
mmc: ushc: Return proper error code for ushc_probe()
mmc: Fix printing of card DDR type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung
* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S5PV210: Fix sysdev related warning messages
ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443
ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416
ARM: S3C64XX: fix uart clock setup for mini6410/real6410
ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull
ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix typo in comment of nilfs_dat_move function
nilfs2: nilfs_iget_for_gc() returns ERR_PTR
|
|
|
|
When SKU assid gives no valid bits for 0x38, the driver didn't take
any action, so far. This resulted in the missing initialization for
external amps, etc, thus the silent output in the end.
Especially users hit this problem on ALC888 newly since 2.6.35,
where the driver doesn't force to use ALC_INIT_DEFAULT any more.
This patch sets the default initialization scheme to use
ALC_INIT_DEFAULT when no valid bits are set for SKU assid.
Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=657388
Reported-and-tested-by: Kyle McMartin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Stephane noticed that because the perf_sw_event() call is inside the
perf_event_task_sched_out() call it won't get called unless we
have a per-task counter.
Reported-by: Stephane Eranian <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
This leads to a Kconfig dep inversion, x86 selects PERF_EVENT (due to
a hw_breakpoint dep) but doesn't unconditionally provide
HAVE_PERF_EVENT.
(This can cause build failures on M386/M486 kernel .config's.)
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
In a kvm virt guests, the perf counters are not emulated. Instead they
return zero on a rdmsrl. The perf nmi handler uses the fact that crossing
a zero means the counter overflowed (for those counters that do not have
specific interrupt bits). Therefore on kvm guests, perf will swallow all
NMIs thinking the counters overflowed.
This causes problems for subsystems like kgdb which needs NMIs to do its
magic. This problem was discovered by running kgdb tests.
The solution is to write garbage into a perf counter during the
initialization and hopefully reading back the same number. On kvm
guests, the value will be read back as zero and we disable perf as
a result.
Reported-by: Jason Wessel <[email protected]>
Patch-inspired-by: Peter Zijlstra <[email protected]>
Signed-off-by: Don Zickus <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
LKML-Reference: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
It was found that sometimes children of tasks with inherited events had
one extra event. Eventually it turned out to be due to the list rotation
no being exclusive with the list iteration in the inheritance code.
Cure this by temporarily disabling the rotation while we inherit the events.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <new-submission>
Cc: <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|