aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-10-16USB: fix port probing and removal in garmin_gpsAlan Stern1-17/+7
This patch (as1615) fixes a bug in the Garmin USB serial driver. It uses attach, disconnect, and release routines to carry out actions that should be handled by port_probe and port_remove routines, because they access port-specific data. The bug causes an oops when the device in unplugged, because the private data for each port structure now gets erased when the port is unbound from the driver, resulting in a null-pointer dereference. Signed-off-by: Alan Stern <[email protected]> Reported--by: Markus Schauler <[email protected]> Tested-by: Markus Schauler <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16USB: pl2303: fix port-data memory leakJohan Hovold1-36/+54
Fix port-data memory leak by allocating and freeing port data in port_probe/remove rather than in attach/release, and by introducing serial private data to store the device type which is interface rather than port specific. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16USB: cp210x: fix port-data memory leakJohan Hovold1-23/+17
Fix port data memory leak by replacing port private data with serial private data. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release. The private data is used to store the control interface number, but as this is the same for all ports on an interface it should be stored as usb-serial data anyway. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16USB: belkin_sa: fix port-data memory leakJohan Hovold1-16/+15
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16USB: cyberjack: fix port-data memory leakJohan Hovold1-30/+19
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16USB: ark3116: fix NULL-pointer dereferenceJohan Hovold1-12/+14
Fix NULL-pointer dereference at release by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is NULL when release is called. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-16ARM: tegra: add tegra_timer clockSivaram Nair2-0/+2
This undoes commit 20f4665 "ARM: tegra: remove tegra_timer from tegra_list_clks" by bringing back the tegra_timer clock. tegra_timer is indeed a clock (hidden by the PERIPH_CLK macro) which should be added to the tegra_list_clks. The above commit caused tegra_init_timer() failing to get the clk reference. Signed-off-by: Sivaram Nair <[email protected]> [swarren: added the reverted commit's subject to this patch description] Signed-off-by: Stephen Warren <[email protected]>
2012-10-16ARM: tegra: rename tegra system timerSivaram Nair4-4/+4
The timer variable is renamed to avoid confusion and symbol name clash with the tegra_timer clock. Signed-off-by: Sivaram Nair <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-10-16ARM: tegra30: clk: Fix output_rate overflowMark Zhang1-1/+1
Change the type of variable from "unsigned long" to "u64". This avoids the overflow while clock rate calculating. Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Stephen Warren <[email protected]>
2012-10-16ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'Shawn Guo1-1/+9
Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <[email protected]> Signed-off-by: Shawn Guo <[email protected]> Tested-by: Huang Shijie <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2012-10-16sparc64: Add global PMU register dumping via sysrq.David S. Miller7-23/+189
Signed-off-by: David S. Miller <[email protected]>
2012-10-16arm64: Remove duplicate inclusion of mmu_context.h in smp.cSachin Kamat1-1/+0
asm/mmu_context.h was included twice. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2012-10-16tools lib traceevent: Fix missed freeing of subargs in free_arg() in filterSteven Rostedt1-0/+15
Some of args were missed in free_args(), as well as subargs. That is args like FILTER_ARG_NUM have left and right pointers to other args that also need to be freed. Signed-off-by: Steven Rostedt <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16lib tools traceevent: Add back pevent assignment in __pevent_parse_format()Steven Rostedt1-3/+6
Even though with the change of commit commit 2b29175 "tools lib traceevent: Carve out events format parsing routine", allowed __pevent_parse_format() to parse an event without the need of a pevent handler, the event still needs to assign the pevent handed to it. There's no problem with assigning it if the pevent is NULL, as the event->pevent would be NULL without the assignment. But function parsing handlers may be assigned to the pevent handler to help in parsing the event. If there's no pevent then there would not be any function handlers, but if the pevent isn't assigned first before parsing the event, it wont honor the function handlers that were assigned. Worse yet, the current code crashes if an event has a function that it tries to parse. For example: # perf record -e scsi:scsi_dispatch_cmd_timeout Segmentation fault (core dumped) This happens because the scsi_dispatch_cmd_timeout event format has the following: scsi_trace_parse_cdb(p, __get_dynamic_array(cmnd), REC->cmd_len) which hasn't been defined by the pevent code. Signed-off-by: Steven Rostedt <[email protected]> Reviewed-by: Namhyung Kim <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16perf hists browser: Fix off-by-two bug on the first columnNamhyung Kim1-1/+3
The commit 5395a04841fc ("perf hists: Separate overhead and baseline columns") makes the "Overhead" column no more the first one. So it resulted in the mis-aligned column in the normal (non-diff) output. Signed-off-by: Namhyung Kim <[email protected]> Reported-by: Markus Trippelsdorf <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/None Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16perf tools: Remove warnings on JIT samples for srcline sort keyNamhyung Kim1-0/+3
When using the srcline sort key with perf report, I see many lines of warning related to JIT samples like below: addr2line: '/tmp/perf-1397.map': No such file Since it's not a ELF binary and doesn't provide such information, just use the raw ip address. Signed-off-by: Namhyung Kim <[email protected]> Cc: David Ahern <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Irina Tirdea <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16perf tools: Fix segfault when using srcline sort keyNamhyung Kim1-0/+3
The srcline sort key is for grouping samples based on their source file and line number. It use addr2line tool to get the information but it requires dso name. It caused a segfault when a sample does not have the name by dereferencing a NULL pointer. Fix it by using raw ip addresses for those samples. Signed-off-by: Namhyung Kim <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16ALSA: hda - Stop LPIB delay counting on broken hardwareTakashi Iwai1-3/+6
If LPIB reports a pretty bad value, we can't trust such hardware for calculating the PCM delay. Automatically turn off the delay counting when such a problem is encountered. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48911 Cc: <[email protected]> [v3.6] Signed-off-by: Takashi Iwai <[email protected]>
2012-10-16perf: Require exclude_guest to use PEBS - kernel side enforcementPeter Zijlstra1-0/+6
Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. This patch enforces exclude_guest kernel side. Signed-off-by: Peter Zijlstra <[email protected]> Cc: Avi Kivity <[email protected]> Cc: David Ahern <[email protected]> Cc: Gleb Natapov <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Robert Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: David Ahern <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16perf tool: Precise mode requires exclude_guestDavid Ahern1-0/+3
Summary of events per Peter: "Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. AMB IBS does work but doesn't currently support exclude_* at all, setting an exclude_* bit will make it fail." This patch handles userspace perf command, setting the exclude_guest attribute if precise mode is requested, but only if a user has not specified a request for guest or host only profiling (G or H attribute). Kernel side AMD currently ignores all exclude_* bits, so there is no impact to existing IBS code paths. Robert Richter has a patch where IBS code will return EINVAL if an exclude_* bit is set. When this goes in it means use of :p on AMD with IBS will first fail with EINVAL (because exclude_guest will be set). Then the existing fallback code within perf will unset exclude_guest and try again. The second attempt will succeed if the CPU supports IBS profiling. Signed-off-by: David Ahern <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Acked-by: Robert Richter <[email protected]> Tested-by: Robert Richter <[email protected]> Reviewed-by: Robert Richter <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Gleb Natapov <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Robert Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-10-16usb: gadget: lpc32xx_udc: Fix compatibility with STOTG04Alexandre Pereira da Silva1-2/+2
The STOTG04 is an replacement for ISP1301. Most of the registers on STOTG04 are the same as on ISP1301, but the register ISP1301_I2C_OTG_CONTROL_2 (address 0x10) doesn't exist on the ST part. This is a work around for this by using the interrupt source register that should behave the same on both parts and has the needed information. Tested-by: Roland Stigge <[email protected]> Signed-off-by: Alexandre Pereira da Silva <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2012-10-16usb: renesas_usbhs: fixup interrupt status clear methodKuninori Morimoto1-3/+3
When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2012-10-16usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st posKuninori Morimoto1-1/+1
__usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2012-10-16nouveau: fix warning on 32-bit build.Dave Airlie1-1/+1
Signed-off-by: Dave Airlie <[email protected]>
2012-10-16Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie4-6/+5
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes minor set of nouveau fixes. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/bios: fix typo in error message drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP drm/nv50/fb: fix double free of vram mm drm/nouveau/pm: do not stop reclocking if failing to set the fan speed drm/nouveau/pm: fix a typo related to the move to the therm subdev drm/nouveau/hwmon: fix the initialization condition
2012-10-16drm/nouveau/bios: fix typo in error messageBen Skeggs1-1/+1
Signed-off-by: Ben Skeggs <[email protected]>
2012-10-16drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGPMax Filippov1-0/+2
ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no point calling it otherwise. Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-10-16drm/nv50/fb: fix double free of vram mmMarcin Slusarz1-1/+0
nouveau_fb_destroy already calls nouveau_mm_fini on vram mm. Signed-off-by: Marcin Slusarz <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-10-16drm/nouveau/pm: do not stop reclocking if failing to set the fan speedMartin Peres1-1/+0
With the introduction of fan management modes, fan may not be drivable. We should allow reclocking nonetheless. This return was stupid to begin with since it may have left the card in an intermediate state (clocks corresponding to a perflvl and voltage corresponding to another one). The reclocking code will need to be rewritten in a near-future in order to provide a better error handling. Reported-by: Marcin Slusarz <[email protected]> Signed-off-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-10-16drm/nouveau/pm: fix a typo related to the move to the therm subdevMartin Peres1-1/+1
Reported-by: Vekin on IRC Reported-by: Emil Velikov <[email protected]> Signed-off-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-10-16drm/nouveau/hwmon: fix the initialization conditionMartin Peres1-2/+1
Signed-off-by: Martin Peres <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-10-15xtensa: Use Kbuild infrastructure to handle asm-generic headersMax Filippov29-374/+26
Use Kbuild infrastructure to handle the asm-generic headers and remove the wrapper headers that call them. This only affects headers that do nothing but include the generic equivalent. It does not touch any header that does a little more. Signed-off-by: Steven Rostedt <[email protected]> Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15UAPI: (Scripted) Disintegrate arch/xtensa/include/asmDavid Howells40-975/+1081
UAPI: (Scripted) Disintegrate arch/xtensa/include/asm Signed-off-by: David Howells <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Acked-by: Michael Kerrisk <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Acked-by: Dave Jones <[email protected]> Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: fix unaligned usermode accessMax Filippov1-2/+2
- correct use of .config #define name; CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Pete Delaney <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: reorganize SR referencingMax Filippov20-292/+254
- reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: fix boot parameters parsingMax Filippov1-2/+2
Boot parameter tags with handlers are ignored like this: [ 0.000000] Ignoring tag 0x00001003 [ 0.000000] Ignoring tag 0x00001001 [ 0.000000] Ignoring tag 0x00001004 because neither tagtable entries nor tag handlers appear in the vmlinux. Fix tagtable definition attributes so that tag entries are not dropped. Fix end of memory bank calculation in parse_tag_mem: it is intended to round down to page size, but instead did something strange leading to hang right after boot. Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: fix missing return in do_page_fault for SIGBUS caseMarc Gauthier1-1/+2
Signed-off-by: Marc Gauthier <[email protected]> Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: copy_thread with CLONE_VM must not copy live parent AR windowsMarc Gauthier1-4/+20
When doing a fork (new VM), the new task has a mirror image of the parent's stack, so keeps the same live register windows etc. However when doing a clone with CLONE_VM, keeping the same VM (eg. when creating a new thread), the child starts afresh on a new stack -- it cannot share any part of the parent stack. It especially cannot have the same live AR windows as the parent, otherwise it will overwrite the parent stack on overflow, likely causing corruption. (and so it did...) Effectively, the register windows need to be spilled. Turns out it's much easier to simply not copy parent register windows when CLONE_VM is set. Signed-off-by: Marc Gauthier <[email protected]> Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: fix memmove(), bcopy(), and memcpy().Chris Zankel1-25/+284
- fix memmove to correctly handle overlapping src and dst; - fix memcpy loop ending conditions from signed '<=' to '!='; - modify bcopy to call memmove; Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: ISS: fix rs_put_charMax Filippov1-7/+2
ISS serial console prints garbage instead of symbols printed via rs_put_char. gcc optimizes away putting prined symbol into memory buffer because there's no evidence that the buffer is used afterwards. Make rs_put_char and rs_write use simc_write that has explicit wmb. Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15xtensa: ISS: fix specific simcallsMax Filippov1-2/+7
Simcalls that take memory buffer definitely need wmb or rmb to make sure gcc doesn't optimize away code that fills the buffer. Signed-off-by: Max Filippov <[email protected]> Signed-off-by: Chris Zankel <[email protected]>
2012-10-15dtb: fix interrupt assignment for ehci/uhci on wm8505Tony Prisk1-2/+2
EHCI and UHCI devices in wm8505.dtsi should use IRQ 1 & 0 respectively - not 43 as used on newer models. Signed-off-by: Tony Prisk <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2012-10-15ARM: dts: compile Integrator device treesLinus Walleij1-0/+2
This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2012-10-16drm: fix warning on 32-bit.Dave Airlie1-1/+1
This cast was causing a warning on 32-bit builds. Signed-off-by: Dave Airlie <[email protected]>
2012-10-16drm: radeon: fix printk format warningRandy Dunlap1-1/+1
drivers/gpu/drm/radeon/radeon_atpx_handler.c:151:3: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t' [airlied: Alex had others fixed already, except for atpx one] Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2012-10-16Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie13-152/+359
into drm-fixes Alex writes: "This is the first -fixes pull for 3.7. I would have preferred to have gotten it out a bit sooner, but I was on holiday last week. - Cleanup of the new 2 level page table code it get it in better shape and using less memory. - Fix some display issues related to the PLL rework. - Fix some cmpiler warnings and errors with certain config options. - Other misc bug fixes." * 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix spelling typos in debugging output drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). drm/radeon: check if pcie gen 2 is already enabled (v2) drm/radeon/cayman: set VM max pfn at MC init drm/radeon: separate pt alloc from lru add drm/radeon: don't add the IB pool to all VMs v2 drm/radeon: allocate page tables on demand v4 drm/radeon: update comments to clarify VM setup (v2) drm/radeon: allocate PPLLs from low to high drm/radeon: fix compilation with backlight disabled drm/radeon: use %zu for formatting size_t
2012-10-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie9-88/+76
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "- some register magic to fix hsw crw (Paulo&Ben) - fix backlight destruction for cpu edp (Jani) - fix gen ch7xxx dvo ->get_hw_state - fixup the plane->pipe fixup code, the broken version massively angers the modeset sanity checks - kill pipe A quirk for i855gm, otherwise I get a black screen with the above patch - fixup for gem_get_page helper (Chris) - fixup guardband clipping w/a (Ken), without this mesa master can erronously drop vertices on snb, mesa 9.0 has the optimization reverted - another pageflip vs. modeset fix - kill bogus BUG_ON which broke ums+gem from Willy Tarreau (gasp, people are still using this!)" * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix non-DP-D eDP backlight cleanup and module reload drm/i915: HSW CRW stability magic drm/i915/dvo-ch7xxx: fix get_hw_state drm/i915: fixup the plane->pipe fixup code drm/i915: rip out the pipe A quirk for i855gm drm/i915: disable wc gtt pte mappings on gen2 drm/i915: fixup i915_gem_object_get_page inline helper drm/i915: Disallow preallocation of requests drm/i915: Set guardband clipping workaround bit in the right register. drm/i915: paper over a pipe-enable vs pageflip race drm/i915: remove useless BUG_ON which caused a regression in 3.5.
2012-10-16ARM: shmobile: r8a7779: use __iomem pointers for MMIOKuninori Morimoto1-11/+11
0a4b04dc299dfb691827a4001b3d8d7e443b71c9 (ARM: shmobile: use __iomem pointers for MMIO) modified iomem pointers so that IOMEM() macro will be used, but clock-r8a7779.c was out of target. This patch fixes it up. Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2012-10-15m68k: Remove empty #ifdef/#else/#endif blockGeert Uytterhoeven1-3/+0
Leftover from commit 10b3a979347d4aba7de19e8d33eb8b87fe2a11dd ("UAPI: (Scripted) Disintegrate arch/m68k/include/asm") Signed-off-by: Geert Uytterhoeven <[email protected]>
2012-10-15Merge tag 'disintegrate-m68k-20121009' of ↵Geert Uytterhoeven30-667/+728
git://git.infradead.org/users/dhowells/linux-headers into for-linus
Powered by cgit, Gruvboxed by Blaster4385.