aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-08stmmac: pci: RX queue routing configurationAndy Shevchenko1-0/+3
The commit abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") missed Intel Quark configuration. Append it here. Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Cc: Joao Pinto <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Joao Pinto <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08stmmac: pci: TX and RX queue priority configurationAndy Shevchenko1-0/+4
The commit a8f5102af2a7 ("net: stmmac: TX and RX queue priority configuration") missed Intel Quark configuration. Append it here. Fixes: a8f5102af2a7 ("net: stmmac: TX and RX queue priority configuration") Cc: Joao Pinto <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Joao Pinto <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08stmmac: pci: set default number of rx and tx queuesAndy Shevchenko1-0/+4
The commit 26d6851fd24e ("net: stmmac: set default number of rx and tx queues in stmmac_pci") missed Intel Quark configuration. Append it here. Fixes: 26d6851fd24e ("net: stmmac: set default number of rx and tx queues in stmmac_pci") Cc: Joao Pinto <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Joao Pinto <[email protected]> Acked-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08vti: check nla_put_* return valueHangbin Liu1-6/+7
Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08bpf: don't let ldimm64 leak map addresses on unprivilegedDaniel Borkmann1-5/+16
The patch fixes two things at once: 1) It checks the env->allow_ptr_leaks and only prints the map address to the log if we have the privileges to do so, otherwise it just dumps 0 as we would when kptr_restrict is enabled on %pK. Given the latter is off by default and not every distro sets it, I don't want to rely on this, hence the 0 by default for unprivileged. 2) Printing of ldimm64 in the verifier log is currently broken in that we don't print the full immediate, but only the 32 bit part of the first insn part for ldimm64. Thus, fix this up as well; it's okay to access, since we verified all ldimm64 earlier already (including just constants) through replace_map_fd_with_map_ptr(). Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs") Fixes: cbd357008604 ("bpf: verifier (add ability to receive verification log)") Reported-by: Jann Horn <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08yam: use memdup_userGeliang Tang1-6/+4
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08net/hippi/rrunner: use memdup_userGeliang Tang1-10/+7
Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08cxgb4: avoid disabling FEC by defaultGanesh Goudar3-10/+43
Recent Chelsio firmware started using few port capablity bits to manage FEC and as driver was not aware of FEC changes those bits were zeroed, consequently disabling FEC. Avoid zeroing those bits and default to whatever the firmware tells us the Link is currently advertising. Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08net: dsa: loop: Check for memory allocation failureChristophe Jaillet1-0/+3
If 'devm_kzalloc' fails, a NULL pointer will be dereferenced. Return -ENOMEM instead, as done for some other memory allocation just a few lines above. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08bonding: check nla_put_be32 return valueHangbin Liu1-1/+2
Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08ubi: Add debugfs file for tracking PEB stateBen Shelton1-1/+125
Add a file under debugfs to allow easy access to the erase count for each physical erase block on an UBI device. This is useful when debugging data integrity issues with UBIFS on NAND flash devices. Signed-off-by: Ben Shelton <[email protected]> Signed-off-by: Zach Brown <[email protected]> v2: * If ubi_io_is_bad eraseblk_count_seq_show just returns the err. * if ubi->lookuptbl returns null, its no longer treated as an error instead info for that block is not printeded * Removed check for UBI_MAX_ERASECOUNTER since it is impossible to hit * Removed block state from print, if a block is printed then it is good and if it is not printed, then it is bad. v3: * Remove errant ! symbol from if statement checking if erase count is valid. Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctlRock Lee1-3/+3
Change 'convert' to 'converts' Change 'UBIFS' to 'UBIFS inode flags' Signed-off-by: Rock Lee <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubifs: Remove unnecessary assignmentStefan Agner1-1/+0
Assigning a value of a variable to itself is not useful. Signed-off-by: Stefan Agner <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubifs: Fix cut and paste error on sb type comparisonsColin Ian King1-2/+2
The check for the bad node type of sb->type is checking sa->type and not sb-type. This looks like a cut and paste error. Fix this. Detected by PVS-Studio, warning: V581 Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubi: fastmap: Fix slab corruptionRabin Vincent1-4/+29
Booting with UBI fastmap and SLUB debugging enabled results in the following splats. The problem is that ubi_scan_fastmap() moves the fastmap blocks from the scan_ai (allocated in scan_fast()) to the ai allocated in ubi_attach(). This results in two problems: - When the scan_ai is freed, aebs which were allocated from its slab cache are still in use. - When the other ai is being destroyed in destroy_ai(), the arguments to kmem_cache_free() call are incorrect since aebs on its ->fastmap list were allocated with a slab cache from a differnt ai. Fix this by making a copy of the aebs in ubi_scan_fastmap() instead of moving them. ============================================================================= BUG ubi_aeb_slab_cache (Not tainted): Objects remaining in ubi_aeb_slab_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000080 CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8026c47c>] (slab_err+0x78/0x88) [<8026c47c>] (slab_err) from [<802735bc>] (__kmem_cache_shutdown+0x180/0x3e0) [<802735bc>] (__kmem_cache_shutdown) from [<8024e13c>] (shutdown_cache+0x1c/0x60) [<8024e13c>] (shutdown_cache) from [<8024ed64>] (kmem_cache_destroy+0x19c/0x20c) [<8024ed64>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) INFO: Object 0xb33d7e88 @offset=3720 INFO: Allocated in scan_peb+0x608/0x81c age=72 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c kmem_cache_destroy ubi_aeb_slab_cache: Slab cache still has objects CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8024ed80>] (kmem_cache_destroy+0x1b8/0x20c) [<8024ed80>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) cache_from_obj: Wrong slab cache. ubi_aeb_slab_cache but object is from ubi_aeb_slab_cache ------------[ cut here ]------------ WARNING: CPU: 1 PID: 118 at mm/slab.h:354 kmem_cache_free+0x39c/0x450 Modules linked in: CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80120e40>] (__warn+0xf4/0x10c) [<80120e40>] (__warn) from [<80120f20>] (warn_slowpath_null+0x28/0x30) [<80120f20>] (warn_slowpath_null) from [<80271fe0>] (kmem_cache_free+0x39c/0x450) [<80271fe0>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 2bd8396277fd0a0b ]--- ============================================================================= BUG ubi_aeb_slab_cache (Tainted: G B W ): page slab pointer corrupt. ----------------------------------------------------------------------------- INFO: Allocated in scan_peb+0x608/0x81c age=104 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000081 INFO: Object 0xb33d7e88 @offset=3720 fp=0xb33d7da0 Redzone b33d7e80: cc cc cc cc cc cc cc cc ........ Object b33d7e88: 02 00 00 00 01 00 00 00 00 f0 ff 7f ff ff ff ff ................ Object b33d7e98: 00 00 00 00 00 00 00 00 bd 16 00 00 00 00 00 00 ................ Object b33d7ea8: 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 ................ Redzone b33d7eb8: cc cc cc cc .... Padding b33d7f60: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 118 Comm: ubiattach Tainted: G B W 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80271770>] (free_debug_processing+0x320/0x3c4) [<80271770>] (free_debug_processing) from [<80271ad0>] (__slab_free+0x2bc/0x430) [<80271ad0>] (__slab_free) from [<80272024>] (kmem_cache_free+0x3e0/0x450) [<80272024>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) FIX ubi_aeb_slab_cache: Object at 0xb33d7e88 not freed Signed-off-by: Rabin Vincent <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labelsHyunchul Lee3-2/+31
When write syscall is called, every time security label is searched to determine that file's privileges should be changed. If LSM(Linux Security Model) is not used, this is useless. So introduce CONFIG_UBIFS_SECURITY to disable security labels. it's default value is "y". Signed-off-by: Hyunchul Lee <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubi: Make mtd parameter readableAndy Shevchenko1-1/+1
Fix permissions to allow read mtd parameter back (only for owner). Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08ubi: Fix section mismatchAndy Shevchenko1-4/+4
WARNING: vmlinux.o(.text+0x1f2a80): Section mismatch in reference from the variable __param_ops_mtd to the function .init.text:ubi_mtd_param_parse() The function __param_ops_mtd() references the function __init ubi_mtd_param_parse(). This is often because __param_ops_mtd lacks a __init annotation or the annotation of ubi_mtd_param_parse is wrong. Cc: Richard Weinberger <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2017-05-08bnxt_en: allocate enough space for ->ntp_fltr_bmapDan Carpenter1-1/+2
We have the number of longs, but we need to calculate the number of bytes required. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08qlge: Avoid reading past end of bufferKees Cook1-2/+2
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08bna: ethtool: Avoid reading past end of bufferKees Cook1-2/+2
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08bna: Avoid reading past end of bufferKees Cook1-1/+1
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08Merge tag 'fscrypt_for_linus' of ↵Linus Torvalds16-187/+301
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Only bug fixes and cleanups for this merge window" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: correct collision claim for digested names MAINTAINERS: fscrypt: update mailing list, patchwork, and git ext4: clean up ext4_match() and callers f2fs: switch to using fscrypt_match_name() ext4: switch to using fscrypt_match_name() fscrypt: introduce helper function for filename matching fscrypt: avoid collisions when presenting long encrypted filenames f2fs: check entire encrypted bigname when finding a dentry ubifs: check for consistent encryption contexts in ubifs_lookup() f2fs: sync f2fs_lookup() with ext4_lookup() ext4: remove "nokey" check from ext4_lookup() fscrypt: fix context consistency check when key(s) unavailable fscrypt: Remove __packed from fscrypt_policy fscrypt: Move key structure and constants to uapi fscrypt: remove fscrypt_symlink_data_len() fscrypt: remove unnecessary checks for NULL operations
2017-05-08vlan: Keep NETIF_F_HW_CSUM similar to other software devicesVlad Yasevich1-3/+10
Vlan devices, like all other software devices, enable NETIF_F_HW_CSUM feature. However, unlike all the othe other software devices, vlans will switch to using IP|IPV6_CSUM features, if the underlying devices uses them. In these situations, checksum offload features on the vlan device can't be controlled via ethtool. This patch makes vlans keep HW_CSUM feature if the underlying device supports checksum offloading. This makes vlan devices behave like other software devices, and restores control to the user. A side-effect is that some offload settings (typically UFO) may be enabled on the vlan device while being disabled on the HW. However, the GSO code will correctly process the packets. This actually results in slightly better raw throughput. Signed-off-by: Vladislav Yasevich <[email protected]> Acked-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08tcp: make congestion control optionally skip slow start after idleWei Wang2-2/+6
Congestion control modules that want full control over congestion control behavior do not want the cwnd modifications controlled by the sysctl_tcp_slow_start_after_idle code path. So skip those code paths for CC modules that use the cong_control() API. As an example, those cwnd effects are not desired for the BBR congestion control algorithm. Fixes: c0402760f565 ("tcp: new CC hook to set sending rate with rate_sample in any CA state") Signed-off-by: Wei Wang <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08ipv4: restore rt->fi for reference countingWANG Cong2-1/+18
IPv4 dst could use fi->fib_metrics to store metrics but fib_info itself is refcnt'ed, so without taking a refcnt fi and fi->fib_metrics could be freed while dst metrics still points to it. This triggers use-after-free as reported by Andrey twice. This patch reverts commit 2860583fe840 ("ipv4: Kill rt->fi") to restore this reference counting. It is a quick fix for -net and -stable, for -net-next, as Eric suggested, we can consider doing reference counting for metrics itself instead of relying on fib_info. IPv6 is very different, it copies or steals the metrics from mx6_config in fib6_commit_metrics() so probably doesn't need a refcnt. Decnet has already done the refcnt'ing, see dn_fib_semantic_match(). Fixes: 2860583fe840 ("ipv4: Kill rt->fi") Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08Merge tag 'ext4_for_linus' of ↵Linus Torvalds18-97/+1165
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: - add GETFSMAP support - some performance improvements for very large file systems and for random write workloads into a preallocated file - bug fixes and cleanups. * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: cleanup write flags handling from jbd2_write_superblock() ext4: mark superblock writes synchronous for nobarrier mounts ext4: inherit encryption xattr before other xattrs ext4: replace BUG_ON with WARN_ONCE in ext4_end_bio() ext4: avoid unnecessary transaction stalls during writeback ext4: preload block group descriptors ext4: make ext4_shutdown() static ext4: support GETFSMAP ioctls vfs: add common GETFSMAP ioctl definitions ext4: evict inline data when writing to memory map ext4: remove ext4_xattr_check_entry() ext4: rename ext4_xattr_check_names() to ext4_xattr_check_entries() ext4: merge ext4_xattr_list() into ext4_listxattr() ext4: constify static data that is never modified ext4: trim return value and 'dir' argument from ext4_insert_dentry() jbd2: fix dbench4 performance regression for 'nobarrier' mounts jbd2: Fix lockdep splat with generic/270 test mm: retry writepages() on ENOMEM when doing an data integrity writeback
2017-05-08block, dax: move "select DAX" from BLOCK to FS_DAXDan Williams9-71/+102
For configurations that do not enable DAX filesystems or drivers, do not require the DAX core to be built. Given that the 'direct_access' method has been removed from 'block_device_operations', we can also go ahead and remove the block-related dax helper functions from fs/block_dev.c to drivers/dax/super.c. This keeps dax details out of the block layer and lets the DAX core be built as a module in the FS_DAX=n case. Filesystems need to include dax.h to call bdev_dax_supported(). Cc: [email protected] Cc: Jens Axboe <[email protected]> Cc: "Theodore Ts'o" <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Alexander Viro <[email protected]> Cc: "Darrick J. Wong" <[email protected]> Cc: Ross Zwisler <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-05-08device-dax: Tell kbuild DEV_DAX_PMEM depends on DEV_DAXMike Galbraith1-1/+1
ERROR: "devm_create_dev_dax" [drivers/dax/dax_pmem.ko] undefined! ERROR: "alloc_dax_region" [drivers/dax/dax_pmem.ko] undefined! ERROR: "dax_region_put" [drivers/dax/dax_pmem.ko] undefined! Signed-off-by: Mike Galbraith <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-05-08fix braino in generic_file_read_iter()Al Viro2-1/+3
Wrong sign of iov_iter_revert() argument. Unfortunately, slipped through the testing, since most of the time we don't do anything to the iterator afterwards and potential oops on walking the iter->iov too far backwards is too infrequent to be easily triggered. Add a sanity check in iov_iter_revert() to catch bugs like this one; fortunately, the same braino hadn't happened in other callers, but we'd better have a warning if such thing crops up. Signed-off-by: Al Viro <[email protected]>
2017-05-08aquantia: Fix "ethtool -S" crash when adapter down.Pavel Belous1-2/+4
This patch fixes the crash that happens when driver tries to collect statistics from already released "aq_vec" object. If adapter is in "down" state we still allow user to see statistics from HW. V2: fixed braces around "aq_vec_free". Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Pavel Belous <[email protected]> Tested-by: David Arcari <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-05-08blk-mq: make __blk_mq_stop_hw_queues staticColin Ian King1-1/+1
Making __blk_mq_stop_hw_queues static fixes sparse warning: block/blk-mq.c:6: warning: symbol '__blk_mq_stop_hw_queues' was not declared. Should it be static? Fixes: 2719aa217e0d0 ("blk-mq: don't use sync workqueue flushing from drivers") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-05-08NFSv4: Fix exclusive create attributes encodingTrond Myklebust1-40/+35
When using NFS4_CREATE_EXCLUSIVE4_1 mode, the client will overestimate the amount of space that it needs for the attributes because it does so before checking whether or not the server supports a given attribute. Fix by checking the attribute mask earlier. Signed-off-by: Trond Myklebust <[email protected]>
2017-05-08NFSv4: Fix an rcu lock leakTrond Myklebust1-2/+4
The intention in the original patch was to release the lock when we put the inode, however something got screwed up. Reported-by: Jason Yan <[email protected]> Fixes: 7b410d9ce460f ("pNFS: Delay getting the layout header in..") Cc: [email protected] # v4.10+ Signed-off-by: Trond Myklebust <[email protected]>
2017-05-08KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLESEric Auger5-0/+74
This patch adds a new attribute to GICV3 KVM device KVM_DEV_ARM_VGIC_GRP_CTRL group. This allows userspace to flush all GICR pending tables into guest RAM. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Acked-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Fix pending table syncEric Auger1-12/+12
In its_sync_lpi_pending_table() we currently ignore the target_vcpu of the LPIs. We sync the pending bit found in the vcpu pending table even if the LPI is not targeting it. Also in vgic_its_cmd_handle_invall() we are supposed to read the config table data for the LPIs associated to the collection ID. At the moment we refresh all LPI config information. This patch passes a vpcu to vgic_copy_lpi_list() so that this latter returns a snapshot of the LPIs targeting this CPU and only those. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Acked-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: ITT save and restoreEric Auger2-3/+117
Implement routines to save and restore device ITT and their interrupt table entries (ITE). Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-its: Device table save/restoreEric Auger2-5/+199
This patch saves the device table entries into guest RAM. Both flat table and 2 stage tables are supported. DeviceId indexing is used. For each device listed in the device table, we also save the translation table using the vgic_its_save/restore_itt routines. Those functions will be implemented in a subsequent patch. On restore, devices are re-allocated and their itt are re-built. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-its: vgic_its_check_id returns the entry's GPAEric Auger1-3/+8
As vgic_its_check_id() computes the device/collection entry's GPA, let's return it so that new callers can retrieve it easily. Signed-off-by: Eric Auger <[email protected]> Acked-by: Christoffer Dall <[email protected]> Acked-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Collection table save/restoreEric Auger2-2/+107
The save path copies the collection entries into guest RAM at the GPA specified in the BASER register. This obviously requires the BASER to be set. The last written element is a dummy collection table entry. We do not index by collection ID as the collection entry can fit into 8 bytes while containing the collection ID. On restore path we re-allocate the collection objects. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Add infrastructure for table lookupEric Auger1-0/+92
Add a generic scan_its_table() helper whose role consists in scanning a contiguous table located in guest RAM and applying a callback on each entry. Entries can be handled as linked lists since the callback may return an id offset to the next entry and also indicate whether the entry is the last one. Helper functions also are added to compute the device/event ID offset to the next DTE/ITE. compute_next_devid_offset, compute_next_eventid_offset and scan_table will become static in subsequent patches Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: vgic_its_alloc_ite/deviceEric Auger1-21/+47
Add two new helpers to allocate an its ite and an its device. This will avoid duplication on restore path. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLESEric Auger3-6/+109
Introduce new attributes in KVM_DEV_ARM_VGIC_GRP_CTRL group: - KVM_DEV_ARM_ITS_SAVE_TABLES: saves the ITS tables into guest RAM - KVM_DEV_ARM_ITS_RESTORE_TABLES: restores them into VGIC internal structures. We hold the vcpus lock during the save and restore to make sure no vcpu is running. At this stage the functionality is not yet implemented. Only the skeleton is put in place. Signed-off-by: Eric Auger <[email protected]> [Given we will move the iodev register until setting the base addr] Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-its: Read config and pending bit in add_lpi()Eric Auger1-11/+24
When creating the lpi we now ask the redistributor what is the state of the LPI (priority, enabled, pending). Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-v3: vgic_v3_lpi_sync_pending_statusEric Auger4-4/+49
this new helper synchronizes the irq pending_latch with the LPI pending bit status found in rdist pending table. As the status is consumed, we reset the bit in pending table. As we need the PENDBASER_ADDRESS() in vgic-v3, let's move its definition in the irqchip header. We restore the full length of the field, ie [51:16]. Same for PROPBASER_ADDRESS with full field length of [51:12]. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-its: Check the device id matches TYPER DEVBITS rangeEric Auger1-5/+20
On MAPD we currently check the device id can be stored in the device table. Let's first check it can be encoded within the range defined by TYPER DEVBITS. Also check the collection ID belongs to the 16 bit range as GITS_TYPER CIL field equals to 0. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Interpret MAPD ITT_addr fieldEric Auger1-0/+4
Up to now the MAPD ITT_addr had been ignored. We will need it for save/restore. Let's record it in the its_device struct. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Interpret MAPD Size field and check related errorsEric Auger2-1/+16
Up to now the MAPD's ITT size field has been ignored. It encodes the number of eventid bit minus 1. It should be used to check the eventid when a MAPTI command is issued on a device. Let's store the number of eventid bits in the its_device and do the check on MAPTI. Also make sure the ITT size field does not exceed the GITS_TYPER IDBITS field. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]> Reviewed-by: Marc Zyngier <[email protected]>
2017-05-08KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_iidrEric Auger2-3/+25
The GITS_IIDR revision field is used to encode the migration ABI revision. So we need to restore it to check the table layout is readable by the destination. By writing the IIDR, userspace thus forces the ABI revision to be used and this must be less than or equal to the max revision KVM supports. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
2017-05-08KVM: arm64: vgic-its: Introduce migration ABI infrastructureEric Auger3-4/+97
We plan to support different migration ABIs, ie. characterizing the ITS table layout format in guest RAM. For example, a new ABI will be needed if vLPIs get supported for nested use case. So let's introduce an array of supported ABIs (at the moment a single ABI is supported though). The following characteristics are foreseen to vary with the ABI: size of table entries, save/restore operation, the way abi settings are applied. By default the MAX_ABI_REV is applied on its creation. In subsequent patches we will introduce a way for the userspace to change the ABI in use. The entry sizes now are set according to the ABI version and not hardcoded anymore. Signed-off-by: Eric Auger <[email protected]> Reviewed-by: Christoffer Dall <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.