aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-01-25KVM: selftests: Re-enable access_tracking_perf_testDavid Matlack1-0/+1
This selftest was accidentally removed by commit 6a58150859fd ("selftest: KVM: Add intra host migration tests"). Add it back. Fixes: 6a58150859fd ("selftest: KVM: Add intra host migration tests") Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-25KVM: VMX: Set vmcs.PENDING_DBG.BS on #DB in STI/MOVSS blocking shadowSean Christopherson1-0/+25
Set vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS, a.k.a. the pending single-step breakpoint flag, when re-injecting a #DB with RFLAGS.TF=1, and STI or MOVSS blocking is active. Setting the flag is necessary to make VM-Entry consistency checks happy, as VMX has an invariant that if RFLAGS.TF is set and STI/MOVSS blocking is true, then the previous instruction must have been STI or MOV/POP, and therefore a single-step #DB must be pending since the RFLAGS.TF cannot have been set by the previous instruction, i.e. the one instruction delay after setting RFLAGS.TF must have already expired. Normally, the CPU sets vmcs.GUEST_PENDING_DBG_EXCEPTIONS.BS appropriately when recording guest state as part of a VM-Exit, but #DB VM-Exits intentionally do not treat the #DB as "guest state" as interception of the #DB effectively makes the #DB host-owned, thus KVM needs to manually set PENDING_DBG.BS when forwarding/re-injecting the #DB to the guest. Note, although this bug can be triggered by guest userspace, doing so requires IOPL=3, and guest userspace running with IOPL=3 has full access to all I/O ports (from the guest's perspective) and can crash/reboot the guest any number of ways. IOPL=3 is required because STI blocking kicks in if and only if RFLAGS.IF is toggled 0=>1, and if CPL>IOPL, STI either takes a #GP or modifies RFLAGS.VIF, not RFLAGS.IF. MOVSS blocking can be initiated by userspace, but can be coincident with a #DB if and only if DR7.GD=1 (General Detect enabled) and a MOV DR is executed in the MOVSS shadow. MOV DR #GPs at CPL>0, thus MOVSS blocking is problematic only for CPL0 (and only if the guest is crazy enough to access a DR in a MOVSS shadow). All other sources of #DBs are either suppressed by MOVSS blocking (single-step, code fetch, data, and I/O), are mutually exclusive with MOVSS blocking (T-bit task switch), or are already handled by KVM (ICEBP, a.k.a. INT1). This bug was originally found by running tests[1] created for XSA-308[2]. Note that Xen's userspace test emits ICEBP in the MOVSS shadow, which is presumably why the Xen bug was deemed to be an exploitable DOS from guest userspace. KVM already handles ICEBP by skipping the ICEBP instruction and thus clears MOVSS blocking as a side effect of its "emulation". [1] http://xenbits.xenproject.org/docs/xtf/xsa-308_2main_8c_source.html [2] https://xenbits.xen.org/xsa/advisory-308.html Reported-by: David Woodhouse <[email protected]> Reported-by: Alexander Graf <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-25KVM: x86: Move CPUID.(EAX=0x12,ECX=1) mangling to __kvm_update_cpuid_runtime()Vitaly Kuznetsov1-21/+33
Full equality check of CPUID data on update (kvm_cpuid_check_equal()) may fail for SGX enabled CPUs as CPUID.(EAX=0x12,ECX=1) is currently being mangled in kvm_vcpu_after_set_cpuid(). Move it to __kvm_update_cpuid_runtime() and split off cpuid_get_supported_xcr0() helper as 'vcpu->arch.guest_supported_xcr0' update needs (logically) to stay in kvm_vcpu_after_set_cpuid(). Cc: [email protected] Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN") Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-01-25net: hns3: handle empty unknown interrupt for VFYufeng Mo1-2/+1
Since some interrupt states may be cleared by hardware, the driver may receive an empty interrupt. Currently, the VF driver directly disables the vector0 interrupt in this case. As a result, the VF is unavailable. Therefore, the vector0 interrupt should be enabled in this case. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Yufeng Mo <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-25net: fec_mpc52xx: don't discard const from netdev->dev_addrJakub Kicinski1-5/+7
Recent changes made netdev->dev_addr const, and it's passed directly to mpc52xx_fec_set_paddr(). Similar problem exists on the probe patch, the driver needs to call eth_hw_addr_set(). Reported-by: Geert Uytterhoeven <[email protected]> Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-25net: cpsw: Properly initialise struct page_pool_paramsToke Høiland-Jørgensen1-1/+1
The cpsw driver didn't properly initialise the struct page_pool_params before calling page_pool_create(), which leads to crashes after the struct has been expanded with new parameters. The second Fixes tag below is where the buggy code was introduced, but because the code was moved around this patch will only apply on top of the commit in the first Fixes tag. Fixes: c5013ac1dd0e ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv") Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support") Reported-by: Colin Foster <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Tested-by: Colin Foster <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-25yam: fix a memory leak in yam_siocdevprivate()Hangyu Hua1-3/+1
ym needs to be free when ym->cmd != SIOCYAMSMCS. Fixes: 0781168e23a2 ("yam: fix a missing-check bug") Signed-off-by: Hangyu Hua <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-25net: stmmac: reduce unnecessary wakeups from eee sw timerJisheng Zhang1-6/+7
Currently, on EEE capable platforms, if EEE SW timer is used, the SW timer cause 1 wakeup/s even if the TX has successfully entered EEE. Remove this unnecessary wakeup by only calling mod_timer() if we haven't successfully entered EEE. Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-01-25Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-2/+14
Pull ARM fixes from Russell King: - Fix panic whe both KASAN and KPROBEs are enabled - Avoid alignment faults in copy_*_kernel_nofault() - Align SMP alternatives in modules * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9180/1: Thumb2: align ALT_UP() sections in modules sufficiently ARM: 9179/1: uaccess: avoid alignment faults in copy_[from|to]_kernel_nofault ARM: 9170/1: fix panic when kasan and kprobe are enabled
2022-01-25powerpc/64s/interrupt: Fix decrementer stormNicholas Piggin1-2/+3
The decrementer exception can fail to be cleared when the interrupt returns in the case where the decrementer wraps with the next timer still beyond decrementer_max. This results in a decrementer interrupt storm. This is triggerable with small decrementer system with hard and soft watchdogs disabled. Fix this by always programming the decrementer if there was no timer. Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use") Reported-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-25KVM: PPC: Book3S HV Nested: Fix nested HFSCR being clobbered with multiple vCPUsNicholas Piggin4-4/+3
The L0 is storing HFSCR requested by the L1 for the L2 in struct kvm_nested_guest when the L1 requests a vCPU enter L2. kvm_nested_guest is not a per-vCPU structure. Hilarity ensues. Fix it by moving the nested hfscr into the vCPU structure together with the other per-vCPU nested fields. Fixes: 8b210a880b35 ("KVM: PPC: Book3S HV Nested: Make nested HFSCR state accessible") Cc: [email protected] # v5.15+ Signed-off-by: Nicholas Piggin <[email protected]> Reviewed-by: Fabiano Rosas <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-24drm/atomic: Add the crtc to affected crtc only if uapi.enable = trueManasi Navare1-4/+8
In case of a modeset where a mode gets split across multiple CRTCs in the driver specific implementation (bigjoiner in i915) we wrongly count the affected CRTCs based on the drm_crtc_mask and indicate the stolen CRTC as an affected CRTC in atomic_check_only(). This triggers a warning since affected CRTCs doent match requested CRTC. To fix this in such bigjoiner configurations, we should only increment affected crtcs if that CRTC is enabled in UAPI not if it is just used internally in the driver to split the mode. v3: Add the same uapi crtc_state->enable check in requested crtc calc (Ville) Cc: Ville Syrjälä <[email protected]> Cc: Simon Ser <[email protected]> Cc: Pekka Paalanen <[email protected]> Cc: Daniel Stone <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.11+ Fixes: 919c2299a893 ("drm/i915: Enable bigjoiner") Signed-off-by: Manasi Navare <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-01-25scsi: myrs: Fix crash in error caseTong Zhang1-1/+2
In myrs_detect(), cs->disable_intr is NULL when privdata->hw_init() fails with non-zero. In this case, myrs_cleanup(cs) will call a NULL ptr and crash the kernel. [ 1.105606] myrs 0000:00:03.0: Unknown Initialization Error 5A [ 1.105872] myrs 0000:00:03.0: Failed to initialize Controller [ 1.106082] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1.110774] Call Trace: [ 1.110950] myrs_cleanup+0xe4/0x150 [myrs] [ 1.111135] myrs_probe.cold+0x91/0x56a [myrs] [ 1.111302] ? DAC960_GEM_intr_handler+0x1f0/0x1f0 [myrs] [ 1.111500] local_pci_probe+0x48/0x90 Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-25scsi: 53c700: Remove redundant assignment to pointer SCpColin Ian King1-1/+0
Pointer SCp is being re-assigned the same value that it was initialized to a few lines earlier, the assignment is redundant and can be removed. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-25scsi: ufs: Treat link loss as fatal errorKiwoong Kim1-1/+2
This event is raised when link is lost as specified in UFSHCI spec and that means communication is not possible. Thus initializing UFS interface needs to be done. Make UFS driver considers Link Lost as fatal in the INT_FATAL_ERRORS mask. This will trigger a host reset whenever a link lost interrupt occurs. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kiwoong Kim <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-25scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()Kiwoong Kim1-3/+6
The return value of ufshcd_set_dev_pwr_mode() is passed to device PM core. However, the function currently returns a SCSI result which the PM core doesn't understand. This might lead to unexpected behaviors in userland; a platform reset was observed in Android. Use a generic error code for SSU failures. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Kiwoong Kim <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: bfa: Remove useless DMA-32 fallback configurationChristophe JAILLET1-6/+0
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/[email protected]/#t Link: https://lore.kernel.org/r/5663cef9b54004fa56cca7ce65f51eadfc3ecddb.1642238127.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: hisi_sas: Remove useless DMA-32 fallback configurationChristophe JAILLET2-5/+0
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/[email protected]/#t Link: https://lore.kernel.org/r/1bf2d3660178b0e6f172e5208bc0bd68d31d9268.1642237482.git.christophe.jaillet@wanadoo.fr Acked-by: John Garry <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: 3w-sas: Remove useless DMA-32 fallback configurationChristophe JAILLET1-4/+0
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32-bit case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/[email protected]/#t Link: https://lore.kernel.org/r/dbbe8671ca760972d80f8d35f3170b4609bee368.1642236763.git.christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()John Meneghini1-15/+5
The bnx2fc_destroy() functions are removing the interface before calling destroy_work. This results multiple WARNings from sysfs_remove_group() as the controller rport device attributes are removed too early. Replace the fcoe_port's destroy_work queue. It's not needed. The problem is easily reproducible with the following steps. Example: $ dmesg -w & $ systemctl enable --now fcoe $ fipvlan -s -c ens2f1 $ fcoeadm -d ens2f1.802 [ 583.464488] host2: libfc: Link down on port (7500a1) [ 583.472651] bnx2fc: 7500a1 - rport not created Yet!! [ 583.490468] ------------[ cut here ]------------ [ 583.538725] sysfs group 'power' not found for kobject 'rport-2:0-0' [ 583.568814] WARNING: CPU: 3 PID: 192 at fs/sysfs/group.c:279 sysfs_remove_group+0x6f/0x80 [ 583.607130] Modules linked in: dm_service_time 8021q garp mrp stp llc bnx2fc cnic uio rpcsec_gss_krb5 auth_rpcgss nfsv4 ... [ 583.942994] CPU: 3 PID: 192 Comm: kworker/3:2 Kdump: loaded Not tainted 5.14.0-39.el9.x86_64 #1 [ 583.984105] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 584.016535] Workqueue: fc_wq_2 fc_rport_final_delete [scsi_transport_fc] [ 584.050691] RIP: 0010:sysfs_remove_group+0x6f/0x80 [ 584.074725] Code: ff 5b 48 89 ef 5d 41 5c e9 ee c0 ff ff 48 89 ef e8 f6 b8 ff ff eb d1 49 8b 14 24 48 8b 33 48 c7 c7 ... [ 584.162586] RSP: 0018:ffffb567c15afdc0 EFLAGS: 00010282 [ 584.188225] RAX: 0000000000000000 RBX: ffffffff8eec4220 RCX: 0000000000000000 [ 584.221053] RDX: ffff8c1586ce84c0 RSI: ffff8c1586cd7cc0 RDI: ffff8c1586cd7cc0 [ 584.255089] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb567c15afc00 [ 584.287954] R10: ffffb567c15afbf8 R11: ffffffff8fbe7f28 R12: ffff8c1486326400 [ 584.322356] R13: ffff8c1486326480 R14: ffff8c1483a4a000 R15: 0000000000000004 [ 584.355379] FS: 0000000000000000(0000) GS:ffff8c1586cc0000(0000) knlGS:0000000000000000 [ 584.394419] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 584.421123] CR2: 00007fe95a6f7840 CR3: 0000000107674002 CR4: 00000000000606e0 [ 584.454888] Call Trace: [ 584.466108] device_del+0xb2/0x3e0 [ 584.481701] device_unregister+0x13/0x60 [ 584.501306] bsg_unregister_queue+0x5b/0x80 [ 584.522029] bsg_remove_queue+0x1c/0x40 [ 584.541884] fc_rport_final_delete+0xf3/0x1d0 [scsi_transport_fc] [ 584.573823] process_one_work+0x1e3/0x3b0 [ 584.592396] worker_thread+0x50/0x3b0 [ 584.609256] ? rescuer_thread+0x370/0x370 [ 584.628877] kthread+0x149/0x170 [ 584.643673] ? set_kthread_struct+0x40/0x40 [ 584.662909] ret_from_fork+0x22/0x30 [ 584.680002] ---[ end trace 53575ecefa942ece ]--- Link: https://lore.kernel.org/r/[email protected] Fixes: 0cbf32e1681d ("[SCSI] bnx2fc: Avoid calling bnx2fc_if_destroy with unnecessary locks") Tested-by: Guangwu Zhang <[email protected]> Co-developed-by: Maurizio Lombardi <[email protected]> Signed-off-by: Maurizio Lombardi <[email protected]> Signed-off-by: John Meneghini <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devicesSteffen Maier1-1/+12
Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/[email protected] Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <[email protected]> #2.6.32+ Suggested-by: Benjamin Block <[email protected]> Reviewed-by: Benjamin Block <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: pm8001: Fix bogus FW crash for maxcpus=1John Garry2-3/+19
According to the comment in check_fw_ready() we should not check the IOP1_READY field in register SCRATCH_PAD_1 for 8008 or 8009 controllers. However we check this very field in process_oq() for processing the highest index interrupt vector. The highest interrupt vector is checked as the FW is programmed to signal fatal errors through this irq. Change that function to not check IOP1_READY for those mentioned controllers, but do check ILA_READY in both cases. The reason I assume that this was not hit earlier was because we always allocated 64 MSI(X), and just did not pass the vector index check in process_oq(), i.e. the handler never ran for vector index 63. Link: https://lore.kernel.org/r/[email protected] Tested-by: Damien Le Moal <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: John Garry <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: qedf: Change context reset messages to ratelimitedSaurav Kashyap1-2/+4
If FCoE is not configured, libfc/libfcoe keeps on retrying FLOGI and after 3 retries driver does a context reset and tries fipvlan again. This leads to context reset message flooding the logs. Hence ratelimit the message to prevent flooding the logs. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: qedf: Fix refcount issue when LOGO is received during TMFSaurav Kashyap1-0/+1
Hung task call trace was seen during LOGO processing. [ 974.309060] [0000:00:00.0]:[qedf_eh_device_reset:868]: 1:0:2:0: LUN RESET Issued... [ 974.309065] [0000:00:00.0]:[qedf_initiate_tmf:2422]: tm_flags 0x10 sc_cmd 00000000c16b930f op = 0x2a target_id = 0x2 lun=0 [ 974.309178] [0000:00:00.0]:[qedf_initiate_tmf:2431]: portid=016900 tm_flags =LUN RESET [ 974.309222] [0000:00:00.0]:[qedf_initiate_tmf:2438]: orig io_req = 00000000ec78df8f xid = 0x180 ref_cnt = 1. [ 974.309625] host1: rport 016900: Received LOGO request while in state Ready [ 974.309627] host1: rport 016900: Delete port [ 974.309642] host1: rport 016900: work event 3 [ 974.309644] host1: rport 016900: lld callback ev 3 [ 974.313243] [0000:61:00.2]:[qedf_execute_tmf:2383]:1: fcport is uploading, not executing flush. [ 974.313295] [0000:61:00.2]:[qedf_execute_tmf:2400]:1: task mgmt command success... [ 984.031088] INFO: task jbd2/dm-15-8:7645 blocked for more than 120 seconds. [ 984.031136] Not tainted 4.18.0-305.el8.x86_64 #1 [ 984.031166] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 984.031209] jbd2/dm-15-8 D 0 7645 2 0x80004080 [ 984.031212] Call Trace: [ 984.031222] __schedule+0x2c4/0x700 [ 984.031230] ? unfreeze_partials.isra.83+0x16e/0x1a0 [ 984.031233] ? bit_wait_timeout+0x90/0x90 [ 984.031235] schedule+0x38/0xa0 [ 984.031238] io_schedule+0x12/0x40 [ 984.031240] bit_wait_io+0xd/0x50 [ 984.031243] __wait_on_bit+0x6c/0x80 [ 984.031248] ? free_buffer_head+0x21/0x50 [ 984.031251] out_of_line_wait_on_bit+0x91/0xb0 [ 984.031257] ? init_wait_var_entry+0x50/0x50 [ 984.031268] jbd2_journal_commit_transaction+0x112e/0x19f0 [jbd2] [ 984.031280] kjournald2+0xbd/0x270 [jbd2] [ 984.031284] ? finish_wait+0x80/0x80 [ 984.031291] ? commit_timeout+0x10/0x10 [jbd2] [ 984.031294] kthread+0x116/0x130 [ 984.031300] ? kthread_flush_work_fn+0x10/0x10 [ 984.031305] ret_from_fork+0x1f/0x40 There was a ref count issue when LOGO is received during TMF. This leads to one of the I/Os hanging with the driver. Fix the ref count. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: qedf: Add stag_work to all the vportsSaurav Kashyap1-0/+1
Call trace seen when creating NPIV ports, only 32 out of 64 show online. stag work was not initialized for vport, hence initialize the stag work. WARNING: CPU: 8 PID: 645 at kernel/workqueue.c:1635 __queue_delayed_work+0x68/0x80 CPU: 8 PID: 645 Comm: kworker/8:1 Kdump: loaded Tainted: G IOE --------- -- 4.18.0-348.el8.x86_64 #1 Hardware name: Dell Inc. PowerEdge MX740c/0177V9, BIOS 2.12.2 07/09/2021 Workqueue: events fc_lport_timeout [libfc] RIP: 0010:__queue_delayed_work+0x68/0x80 Code: 89 b2 88 00 00 00 44 89 82 90 00 00 00 48 01 c8 48 89 42 50 41 81 f8 00 20 00 00 75 1d e9 60 24 07 00 44 89 c7 e9 98 f6 ff ff <0f> 0b eb c5 0f 0b eb a1 0f 0b eb a7 0f 0b eb ac 44 89 c6 e9 40 23 RSP: 0018:ffffae514bc3be40 EFLAGS: 00010006 RAX: ffff8d25d6143750 RBX: 0000000000000202 RCX: 0000000000000002 RDX: ffff8d2e31383748 RSI: ffff8d25c000d600 RDI: ffff8d2e31383788 RBP: ffff8d2e31380de0 R08: 0000000000002000 R09: ffff8d2e31383750 R10: ffffffffc0c957e0 R11: ffff8d2624800000 R12: ffff8d2e31380a58 R13: ffff8d2d915eb000 R14: ffff8d25c499b5c0 R15: ffff8d2e31380e18 FS: 0000000000000000(0000) GS:ffff8d2d1fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fd0484b8b8 CR3: 00000008ffc10006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: queue_delayed_work_on+0x36/0x40 qedf_elsct_send+0x57/0x60 [qedf] fc_lport_enter_flogi+0x90/0xc0 [libfc] fc_lport_timeout+0xb7/0x140 [libfc] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x35/0x40 ---[ end trace 008f00f722f2c2ff ]-- Initialize stag work for all the vports. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()Xiaoke Wang1-0/+7
devm_kstrdup() returns pointer to allocated string on success, NULL on failure. So it is better to check the return value of it. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bean Huo <[email protected]> Signed-off-by: Xiaoke Wang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: target: iscsi: Make sure the np under each tpg is uniqueZouMingzhe1-0/+3
iscsit_tpg_check_network_portal() has nested for_each loops and is supposed to return true when a match is found. However, the tpg loop will still continue after existing the tpg_np loop. If this tpg_np is not the last the match value will be changed. Break the outer loop after finding a match and make sure the np under each tpg is unique. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: ZouMingzhe <[email protected]> Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-24scsi: elx: efct: Don't use GFP_KERNEL under spin lockYang Yingliang1-6/+2
GFP_KERNEL/GFP_DMA can't be used under a spin lock. According the comment, els_ios_lock is used to protect els ios list so we can move down the spin lock to avoid using this flag under the lock. Link: https://lore.kernel.org/r/[email protected] Fixes: 8f406ef72859 ("scsi: elx: libefc: Extended link Service I/O handling") Reported-by: Hulk Robot <[email protected]> Reviewed-by: James Smart <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-01-25drm/msm/dsi: invalid parameter check in msm_dsi_phy_enableJosé Expósito1-1/+3
The function performs a check on the "phy" input parameter, however, it is used before the check. Initialize the "dev" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 5c8290284402b ("drm/msm/dsi: Split PHY drivers to separate files") Addresses-Coverity-ID: 1493860 ("Null pointer dereference") Signed-off-by: José Expósito <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm/a6xx: Add missing suspend_count incrementRob Clark1-0/+2
Reported-by: Danylo Piliaiev <[email protected]> Fixes: 3ab1c5cc3939 ("drm/msm: Add param for userspace to query suspend count") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm: Fix wrong size calculationXianting Tian1-1/+1
For example, memory-region in .dts as below, reg = <0x0 0x50000000 0x0 0x20000000> We can get below values, struct resource r; r.start = 0x50000000; r.end = 0x6fffffff; So the size should be: size = r.end - r.start + 1 = 0x20000000 Signed-off-by: Xianting Tian <[email protected]> Fixes: 072f1f9168ed ("drm/msm: add support for "stolen" mem") Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pccJosé Expósito1-2/+9
The function performs a check on the "ctx" input parameter, however, it is used before the check. Initialize the "base" variable after the sanity check to avoid a possible NULL pointer dereference. Fixes: 4259ff7ae509e ("drm/msm/dpu: add support for pcc color block in dpu driver") Addresses-Coverity-ID: 1493866 ("Null pointer dereference") Signed-off-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm/hdmi: Fix missing put_device() call in msm_hdmi_get_phyMiaoqian Lin1-1/+6
The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path. Fixes: e00012b256d4 ("drm/msm/hdmi: Make HDMI core get its PHY") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm/dsi: Fix missing put_device() call in dsi_get_phyMiaoqian Lin1-1/+6
If of_find_device_by_node() succeeds, dsi_get_phy() doesn't a corresponding put_device(). Thus add put_device() to fix the exception handling. Fixes: ec31abf ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-25drm/msm: remove variable set but not usedYang Li1-3/+0
The code that uses variable mdss has been removed, So the declaration and assignment of the variable can be removed. Eliminate the following clang warning: drivers/gpu/drm/msm/msm_drv.c:513:19: warning: variable 'mdss' set but not used [-Wunused-but-set-variable] Reported-by: Abaci Robot <[email protected]> Fixes: 2027e5b3413d ("drm/msm: Initialize MDSS irq domain at probe time") Signed-off-by: Yang Li <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]>
2022-01-24hwmon: (nct6775) Fix crash in clear_caseopenGuenter Roeck1-3/+3
Paweł Marciniak reports the following crash, observed when clearing the chassis intrusion alarm. BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 4815 Comm: bash Tainted: G S 5.16.2-200.fc35.x86_64 #1 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P2.60A 05/03/2018 RIP: 0010:clear_caseopen+0x5a/0x120 [nct6775] Code: 68 70 e8 e9 32 b1 e3 85 c0 0f 85 d2 00 00 00 48 83 7c 24 ... RSP: 0018:ffffabcb02803dd8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8e8808192880 RSI: 0000000000000000 RDI: ffff8e87c7509a68 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000000a R10: 000000000000000a R11: f000000000000000 R12: 000000000000001f R13: ffff8e87c7509828 R14: ffff8e87c7509a68 R15: ffff8e88494527a0 FS: 00007f4db9151740(0000) GS:ffff8e8ebfec0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000166b66001 CR4: 00000000001706e0 Call Trace: <TASK> kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x10b/0x180 vfs_write+0x209/0x2a0 ksys_write+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The problem is that the device passed to clear_caseopen() is the hwmon device, not the platform device, and the platform data is not set in the hwmon device. Store the pointer to sio_data in struct nct6775_data and get if from there if needed. Fixes: 2e7b9886968b ("hwmon: (nct6775) Use superio_*() function pointers in sio_data.") Cc: Denis Pauk <[email protected]> Cc: Bernhard Seibold <[email protected]> Reported-by: Paweł Marciniak <[email protected]> Tested-by: Denis Pauk <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-24Merge tag 'linux-can-fixes-for-5.17-20220124' of ↵Jakub Kicinski6-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-01-24 The first patch updates the email address of Brian Silverman from his former employer to his private address. The next patch fixes DT bindings information for the tcan4x5x SPI CAN driver. The following patch targets the m_can driver and fixes the introduction of FIFO bulk read support. Another patch for the tcan4x5x driver, which fixes the max register value for the regmap config. The last patch for the flexcan driver marks the RX mailbox support for the MCF5441X as support. * tag 'linux-can-fixes-for-5.17-20220124' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: flexcan: mark RX via mailboxes as supported on MCF5441X can: tcan4x5x: regmap: fix max register value can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if length is 0 dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO config mailmap: update email address of Brian Silverman ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-01-24can: flexcan: mark RX via mailboxes as supported on MCF5441XMarc Kleine-Budde2-1/+2
Most flexcan IP cores support 2 RX modes: - FIFO - mailbox The flexcan IP core on the MCF5441X cannot receive CAN RTR messages via mailboxes. However the mailbox mode is more performant. The commit | 1c45f5778a3b ("can: flexcan: add ethtool support to change rx-rtr setting during runtime") added support to switch from FIFO to mailbox mode on these cores. After testing the mailbox mode on the MCF5441X by Angelo Dureghello, this patch marks it (without RTR capability) as supported. Further the IP core overview table is updated, that RTR reception via mailboxes is not supported. Link: https://lore.kernel.org/all/[email protected] Tested-by: Angelo Dureghello <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-01-24can: tcan4x5x: regmap: fix max register valueMarc Kleine-Budde1-1/+1
The MRAM of the tcan4x5x has a size of 2K and starts at 0x8000. There are no further registers in the tcan4x5x making 0x87fc the biggest addressable register. This patch fixes the max register value of the regmap config from 0x8ffc to 0x87fc. Fixes: 6e1caaf8ed22 ("can: tcan4x5x: fix max register value") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-01-24can: m_can: m_can_fifo_{read,write}: don't read or write from/to FIFO if ↵Marc Kleine-Budde1-0/+6
length is 0 In order to optimize FIFO access, especially on m_can cores attached to slow busses like SPI, in patch | e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") bulk read/write support has been added to the m_can_fifo_{read,write} functions. That change leads to the tcan driver to call regmap_bulk_{read,write}() with a length of 0 (for CAN frames with 0 data length). regmap treats this as an error: | tcan4x5x spi1.0 tcan4x5x0: FIFO write returned -22 This patch fixes the problem by not calling the cdev->ops->{read,write)_fifo() in case of a 0 length read/write. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Cc: Matt Kline <[email protected]> Cc: Chandrasekar Ramakrishnan <[email protected]> Reported-by: Michael Anochin <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-01-24dt-bindings: can: tcan4x5x: fix mram-cfg RX FIFO configMarc Kleine-Budde1-1/+1
This tcan4x5x only comes with 2K of MRAM, a RX FIFO with a dept of 32 doesn't fit into the MRAM. Use a depth of 16 instead. Fixes: 4edd396a1911 ("dt-bindings: can: tcan4x5x: Add DT bindings for TCAN4x5X driver") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-01-24mailmap: update email address of Brian SilvermanMarc Kleine-Budde1-0/+1
Brian Silverman's address at bluerivertech.com is not valid anymore, use Brian's private email address instead. Link: https://lore.kernel.org/all/[email protected] Cc: Brian Silverman <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-01-24btrfs: update writeback index when starting defragFilipe Manana1-0/+9
When starting a defrag, we should update the writeback index of the inode's mapping in case it currently has a value beyond the start of the range we are defragging. This can help performance and often result in getting less extents after writeback - for e.g., if the current value of the writeback index sits somewhere in the middle of a range that gets dirty by the defrag, then after writeback we can get two smaller extents instead of a single, larger extent. We used to have this before the refactoring in 5.16, but it was removed without any reason to do so. Originally it was added in kernel 3.1, by commit 2a0f7f5769992b ("Btrfs: fix recursive auto-defrag"), in order to fix a loop with autodefrag resulting in dirtying and writing pages over and over, but some testing on current code did not show that happening, at least with the test described in that commit. So add back the behaviour, as at the very least it is a nice to have optimization. Fixes: 7b508037d4cac3 ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()") CC: [email protected] # 5.16 Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-01-24btrfs: add back missing dirty page rate limiting to defragFilipe Manana1-0/+5
A defrag operation can dirty a lot of pages, specially if operating on the entire file or a large file range. Any task dirtying pages should periodically call balance_dirty_pages_ratelimited(), as stated in that function's comments, otherwise they can leave too many dirty pages in the system. This is what we did before the refactoring in 5.16, and it should have remained, just like in the buffered write path and relocation. So restore that behaviour. Fixes: 7b508037d4cac3 ("btrfs: defrag: use defrag_one_cluster() to implement btrfs_defrag_file()") CC: [email protected] # 5.16 Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-01-24btrfs: fix deadlock when reserving space during defragFilipe Manana1-1/+30
When defragging we can end up collecting a range for defrag that has already pages under delalloc (dirty), as long as the respective extent map for their range is not mapped to a hole, a prealloc extent or the extent map is from an old generation. Most of the time that is harmless from a functional perspective at least, however it can result in a deadlock: 1) At defrag_collect_targets() we find an extent map that meets all requirements but there's delalloc for the range it covers, and we add its range to list of ranges to defrag; 2) The defrag_collect_targets() function is called at defrag_one_range(), after it locked a range that overlaps the range of the extent map; 3) At defrag_one_range(), while the range is still locked, we call defrag_one_locked_target() for the range associated to the extent map we collected at step 1); 4) Then finally at defrag_one_locked_target() we do a call to btrfs_delalloc_reserve_space(), which will reserve data and metadata space. If the space reservations can not be satisfied right away, the flusher might be kicked in and start flushing delalloc and wait for the respective ordered extents to complete. If this happens we will deadlock, because both flushing delalloc and finishing an ordered extent, requires locking the range in the inode's io tree, which was already locked at defrag_collect_targets(). So fix this by skipping extent maps for which there's already delalloc. Fixes: eb793cf857828d ("btrfs: defrag: introduce helper to collect target file extents") CC: [email protected] # 5.16 Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-01-24arm64: Mark start_backtrace() notrace and NOKPROBE_SYMBOLMasami Hiramatsu1-2/+3
Mark the start_backtrace() as notrace and NOKPROBE_SYMBOL because this function is called from ftrace and lockdep to get the caller address via return_address(). The lockdep is used in kprobes, it should also be NOKPROBE_SYMBOL. Fixes: b07f3499661c ("arm64: stacktrace: Move start_backtrace() out of the header") Cc: <[email protected]> # 5.13.x Signed-off-by: Masami Hiramatsu <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/164301227374.1433152.12808232644267107415.stgit@devnote2 Signed-off-by: Catalin Marinas <[email protected]>
2022-01-24arm64: errata: Update ARM64_ERRATUM_[2119858|2224489] with Cortex-X2 rangesAnshuman Khandual3-6/+12
Errata ARM64_ERRATUM_[2119858|2224489] also affect some Cortex-X2 ranges as well. Lets update these errata definition and detection to accommodate all new Cortex-X2 based cpu MIDR ranges. Cc: Will Deacon <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Suzuki Poulose <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Anshuman Khandual <[email protected]> Reviewed-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-01-24arm64: Add Cortex-X2 CPU part definitionAnshuman Khandual1-0/+2
Add the CPU Partnumbers for the new Arm designs. Cc: Will Deacon <[email protected]> Cc: Suzuki Poulose <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Anshuman Khandual <[email protected]> Reviewed-by: Suzuki K Poulose <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-01-24video: hyperv_fb: Fix validation of screen resolutionMichael Kelley1-13/+3
In the WIN10 version of the Synthetic Video protocol with Hyper-V, Hyper-V reports a list of supported resolutions as part of the protocol negotiation. The driver calculates the maximum width and height from the list of resolutions, and uses those maximums to validate any screen resolution specified in the video= option on the kernel boot line. This method of validation is incorrect. For example, the list of supported resolutions could contain 1600x1200 and 1920x1080, both of which fit in an 8 Mbyte frame buffer. But calculating the max width and height yields 1920 and 1200, and 1920x1200 resolution does not fit in an 8 Mbyte frame buffer. Unfortunately, this resolution is accepted, causing a kernel fault when the driver accesses memory outside the frame buffer. Instead, validate the specified screen resolution by calculating its size, and comparing against the frame buffer size. Delete the code for calculating the max width and height from the list of resolutions, since these max values have no use. Also add the frame buffer size to the info message to aid in understanding why a resolution might be rejected. Fixes: 67e7cdb4829d ("video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host") Signed-off-by: Michael Kelley <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-01-24KVM: remove async parameter of hva_to_pfn_remapped()Xianting Tian1-4/+3
The async parameter of hva_to_pfn_remapped() is not used, so remove it. Signed-off-by: Xianting Tian <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.