aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-09-03tipc: correct spelling errors for struct tipc_bc_base's commentZhenbo Gao1-2/+2
Trivial fix for two spelling mistakes. Signed-off-by: Zhenbo Gao <[email protected]> Reviewed-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03Merge branch 'bnxt_en-Bug-fixes'David S. Miller5-33/+20
Michael Chan says: ==================== bnxt_en: Bug fixes. This short series fixes resource related logic in the driver, mostly affecting the RDMA driver under corner cases. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-09-03bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.Michael Chan4-12/+9
Currently, the driver adjusts the bp->hw_resc.max_cp_rings by the number of MSIX vectors used by RDMA. There is one code path in open that needs to check the true max_cp_rings including any used by RDMA. This code is now checking for the reduced max_cp_rings which will fail when the number of cp rings is very small. To fix this in a clean way, we don't adjust max_cp_rings anymore. Instead, we add a helper bnxt_get_max_func_cp_rings_for_en() to get the reduced max_cp_rings when appropriate. Fixes: ec86f14ea506 ("bnxt_en: Add ULP calls to stop and restart IRQs.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03bnxt_en: Clean up unused functions.Michael Chan4-18/+1
Remove unused bnxt_subtract_ulp_resources(). Change bnxt_get_max_func_irqs() to static since it is only locally used. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03bnxt_en: Fix firmware signaled resource change logic in open.Michael Chan1-3/+10
When the driver detects that resources have changed during open, it should reset the rx and tx rings to 0. This will properly setup the init sequence to initialize the default rings again. We also need to signal the RDMA driver to stop and clear its interrupts. We then call the RoCE driver to restart if a new set of default rings is successfully reserved. Fixes: 25e1acd6b92b ("bnxt_en: Notify firmware about IF state changes.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03Merge branch 'sctp-two-fixes-for-spp_ipv6_flowlabel-and-spp_dscp-sockopts'David S. Miller1-15/+19
Xin Long says: ==================== sctp: two fixes for spp_ipv6_flowlabel and spp_dscp sockopts This patchset fixes two problems in sctp_apply_peer_addr_params() when setting spp_ipv6_flowlabel or spp_dscp. ==================== Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabelXin Long1-4/+6
When users set params.spp_address and get a trans, ipv6_flowlabel flag should be applied into this trans. But even if this one is not an ipv6 trans, it should not go to apply it into all other transes of the asoc but simply ignore it. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03sctp: fix invalid reference to the index variable of the iteratorXin Long1-11/+13
Now in sctp_apply_peer_addr_params(), if SPP_IPV6_FLOWLABEL flag is set and trans is NULL, it would use trans as the index variable to traverse transport_addr_list, then trans is set as the last transport of it. Later, if SPP_DSCP flag is set, it would enter into the wrong branch as trans is actually an invalid reference. So fix it by using a new index variable to traverse transport_addr_list for both SPP_DSCP and SPP_IPV6_FLOWLABEL flags process. Fixes: 0b0dce7a36fb ("sctp: add spp_ipv6_flowlabel and spp_dscp for sctp_paddrparams") Reported-by: Julia Lawall <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov1-3/+3
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03net: sched: null actions array pointer before releasing actionVlad Buslov1-1/+1
Currently, tcf_action_delete() nulls actions array pointer after putting and deleting it. However, if tcf_idr_delete_index() returns an error, pointer to action is not set to null. That results it being released second time in error handling code of tca_action_gd(). Kasan error: [ 807.367755] ================================================================== [ 807.375844] BUG: KASAN: use-after-free in tc_setup_cb_call+0x14e/0x250 [ 807.382763] Read of size 8 at addr ffff88033e636000 by task tc/2732 [ 807.391289] CPU: 0 PID: 2732 Comm: tc Tainted: G W 4.19.0-rc1+ #799 [ 807.399542] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 807.407948] Call Trace: [ 807.410763] dump_stack+0x92/0xeb [ 807.414456] print_address_description+0x70/0x360 [ 807.419549] kasan_report+0x14d/0x300 [ 807.423582] ? tc_setup_cb_call+0x14e/0x250 [ 807.428150] tc_setup_cb_call+0x14e/0x250 [ 807.432539] ? nla_put+0x65/0xe0 [ 807.436146] fl_dump+0x394/0x3f0 [cls_flower] [ 807.440890] ? fl_tmplt_dump+0x140/0x140 [cls_flower] [ 807.446327] ? lock_downgrade+0x320/0x320 [ 807.450702] ? lock_acquire+0xe2/0x220 [ 807.454819] ? is_bpf_text_address+0x5/0x140 [ 807.459475] ? memcpy+0x34/0x50 [ 807.462980] ? nla_put+0x65/0xe0 [ 807.466582] tcf_fill_node+0x341/0x430 [ 807.470717] ? tcf_block_put+0xe0/0xe0 [ 807.474859] tcf_node_dump+0xdb/0xf0 [ 807.478821] fl_walk+0x8e/0x170 [cls_flower] [ 807.483474] tcf_chain_dump+0x35a/0x4d0 [ 807.487703] ? tfilter_notify+0x170/0x170 [ 807.492091] ? tcf_fill_node+0x430/0x430 [ 807.496411] tc_dump_tfilter+0x362/0x3f0 [ 807.500712] ? tc_del_tfilter+0x850/0x850 [ 807.505104] ? kasan_unpoison_shadow+0x30/0x40 [ 807.509940] ? __mutex_unlock_slowpath+0xcf/0x410 [ 807.515031] netlink_dump+0x263/0x4f0 [ 807.519077] __netlink_dump_start+0x2a0/0x300 [ 807.523817] ? tc_del_tfilter+0x850/0x850 [ 807.528198] rtnetlink_rcv_msg+0x46a/0x6d0 [ 807.532671] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.536878] ? tc_del_tfilter+0x850/0x850 [ 807.541280] netlink_rcv_skb+0x18d/0x200 [ 807.545570] ? rtnl_fdb_del+0x3f0/0x3f0 [ 807.549773] ? netlink_ack+0x500/0x500 [ 807.553913] netlink_unicast+0x2d0/0x370 [ 807.558212] ? netlink_attachskb+0x340/0x340 [ 807.562855] ? _copy_from_iter_full+0xe9/0x3e0 [ 807.567677] ? import_iovec+0x11e/0x1c0 [ 807.571890] netlink_sendmsg+0x3b9/0x6a0 [ 807.576192] ? netlink_unicast+0x370/0x370 [ 807.580684] ? netlink_unicast+0x370/0x370 [ 807.585154] sock_sendmsg+0x6b/0x80 [ 807.589015] ___sys_sendmsg+0x4a1/0x520 [ 807.593230] ? copy_msghdr_from_user+0x210/0x210 [ 807.598232] ? do_wp_page+0x174/0x880 [ 807.602276] ? __handle_mm_fault+0x749/0x1c10 [ 807.607021] ? __handle_mm_fault+0x1046/0x1c10 [ 807.611849] ? __pmd_alloc+0x320/0x320 [ 807.615973] ? check_chain_key+0x140/0x1f0 [ 807.620450] ? check_chain_key+0x140/0x1f0 [ 807.624929] ? __fget_light+0xbc/0xd0 [ 807.628970] ? __sys_sendmsg+0xd7/0x150 [ 807.633172] __sys_sendmsg+0xd7/0x150 [ 807.637201] ? __ia32_sys_shutdown+0x30/0x30 [ 807.641846] ? up_read+0x53/0x90 [ 807.645442] ? __do_page_fault+0x484/0x780 [ 807.649949] ? do_syscall_64+0x1e/0x2c0 [ 807.654164] do_syscall_64+0x72/0x2c0 [ 807.658198] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.663625] RIP: 0033:0x7f42e9870150 [ 807.667568] Code: 8b 15 3c 7d 2b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 83 3d b9 d5 2b 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 be cd 00 00 48 89 04 24 [ 807.687328] RSP: 002b:00007ffdbf595b58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 807.695564] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f42e9870150 [ 807.703083] RDX: 0000000000000000 RSI: 00007ffdbf595b80 RDI: 0000000000000003 [ 807.710605] RBP: 00007ffdbf599d90 R08: 0000000000679bc0 R09: 000000000000000f [ 807.718127] R10: 00000000000005e7 R11: 0000000000000246 R12: 00007ffdbf599d88 [ 807.725651] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 807.735048] Allocated by task 2687: [ 807.738902] kasan_kmalloc+0xa0/0xd0 [ 807.742852] __kmalloc+0x118/0x2d0 [ 807.746615] tcf_idr_create+0x44/0x320 [ 807.750738] tcf_nat_init+0x41e/0x530 [act_nat] [ 807.755638] tcf_action_init_1+0x4e0/0x650 [ 807.760104] tcf_action_init+0x1ce/0x2d0 [ 807.764395] tcf_exts_validate+0x1d8/0x200 [ 807.768861] fl_change+0x55a/0x26b4 [cls_flower] [ 807.773845] tc_new_tfilter+0x748/0xa20 [ 807.778051] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.782517] netlink_rcv_skb+0x18d/0x200 [ 807.786804] netlink_unicast+0x2d0/0x370 [ 807.791095] netlink_sendmsg+0x3b9/0x6a0 [ 807.795387] sock_sendmsg+0x6b/0x80 [ 807.799240] ___sys_sendmsg+0x4a1/0x520 [ 807.803445] __sys_sendmsg+0xd7/0x150 [ 807.807473] do_syscall_64+0x72/0x2c0 [ 807.811506] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.818776] Freed by task 2728: [ 807.822283] __kasan_slab_free+0x122/0x180 [ 807.826752] kfree+0xf4/0x2f0 [ 807.830080] __tcf_action_put+0x5a/0xb0 [ 807.834281] tcf_action_put_many+0x46/0x70 [ 807.838747] tca_action_gd+0x232/0xc40 [ 807.842862] tc_ctl_action+0x215/0x230 [ 807.846977] rtnetlink_rcv_msg+0x56a/0x6d0 [ 807.851444] netlink_rcv_skb+0x18d/0x200 [ 807.855731] netlink_unicast+0x2d0/0x370 [ 807.860021] netlink_sendmsg+0x3b9/0x6a0 [ 807.864312] sock_sendmsg+0x6b/0x80 [ 807.868166] ___sys_sendmsg+0x4a1/0x520 [ 807.872372] __sys_sendmsg+0xd7/0x150 [ 807.876401] do_syscall_64+0x72/0x2c0 [ 807.880431] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 807.887704] The buggy address belongs to the object at ffff88033e636000 which belongs to the cache kmalloc-256 of size 256 [ 807.900909] The buggy address is located 0 bytes inside of 256-byte region [ffff88033e636000, ffff88033e636100) [ 807.913155] The buggy address belongs to the page: [ 807.918322] page:ffffea000cf98d80 count:1 mapcount:0 mapping:ffff88036f80ee00 index:0x0 compound_mapcount: 0 [ 807.928831] flags: 0x5fff8000008100(slab|head) [ 807.933647] raw: 005fff8000008100 ffffea000db44f00 0000000400000004 ffff88036f80ee00 [ 807.942050] raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 [ 807.950456] page dumped because: kasan: bad access detected [ 807.958240] Memory state around the buggy address: [ 807.963405] ffff88033e635f00: fc fc fc fc fb fb fb fb fb fb fb fc fc fc fc fb [ 807.971288] ffff88033e635f80: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc [ 807.979166] >ffff88033e636000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 807.994882] ^ [ 807.998477] ffff88033e636080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 808.006352] ffff88033e636100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 808.014230] ================================================================== [ 808.022108] Disabling lock debugging due to kernel taint Fixes: edfaf94fa705 ("net_sched: improve and refactor tcf_action_put_many()") Signed-off-by: Vlad Buslov <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03drm/i915/dp_mst: Fix enabling pipe clock for all streamsImre Deak2-8/+13
commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders") inadvertently stopped enabling the pipe clock for any DP-MST stream after the first one. It also rearranged the pipe clock enabling wrt. initial MST payload allocation step (which may or may not be a problem, but it's contrary to the spec.). Fix things by making the above commit truly a non-functional change. Fixes: afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to encoders") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107365 Reported-by: Lyude Paul <[email protected]> Reported-by: [email protected] Tested-by: [email protected] Tested-by: Lyude Paul <[email protected]> Cc: Lyude Paul <[email protected]> Cc: [email protected] Cc: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Chris Wilson <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2b5cf4ef541f1b2facaca58cae5e8e0b5f19ad4c) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-09-03drm/i915/dsc: Fix PPS register definition macros for 2nd VDSC engineManasi Navare1-2/+2
This patch fixes the PPS4 and PPS5 register definition macros that were resulting into an incorect MMIO address. Fixes: 2efbb2f099fb ("i915/dp/dsc: Add DSC PPS register definitions") Cc: Anusha Srivatsa <[email protected]> Signed-off-by: Manasi Navare <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Reviewed-by: Anusha Srivatsa <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 5df52391ddbed869c7d67b00fbb013bd64334115) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-09-03drm/i915: Re-apply "Perform link quality check, unconditionally during long ↵Jan-Marek Glogowski1-14/+19
pulse" This re-applies the workaround for "some DP sinks, [which] are a little nuts" from commit 1a36147bb939 ("drm/i915: Perform link quality check unconditionally during long pulse"). It makes the secondary AOC E2460P monitor connected via DP to an acer Veriton N4640G usable again. This hunk was dropped in commit c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") Fixes: c85d200e8321 ("drm/i915: Move SST DP link retraining into the ->post_hotplug() hook") [Cleaned up commit message, added stable cc] Signed-off-by: Lyude Paul <[email protected]> Signed-off-by: Jan-Marek Glogowski <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 3cf71bc9904d7ee4a25a822c5dcb54c7804ea388) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-09-03Merge tag 'gvt-fixes-2018-09-04' of https://github.com/intel/gvt-linux into ↵Rodrigo Vivi6-26/+86
drm-intel-fixes gvt-fixes-2018-09-04 - two BXT virtual display emulation fixes (Colin) - gen9 dbuf guest warning fix (Xiaolin) - vgpu close pm warning fix (Hang) - dmabuf format_mod fix (Zhenyu) - multiple VM guest failure fix for scheduling (Zhenyu) Signed-off-by: Rodrigo Vivi <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-09-03vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definitionGleb Fotengauer-Malinovskiy1-1/+1
The _IOC_READ flag fits this ioctl request more because this request actually only writes to, but doesn't read from userspace. See NOTEs in include/uapi/asm-generic/ioctl.h for more information. Fixes: 429711aec282 ("vhost: switch to use new message format") Signed-off-by: Gleb Fotengauer-Malinovskiy <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03r8169: add support for NCube 8168 network cardAnthony Wong2-0/+3
This card identifies itself as: Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06) Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468] Adding a new entry to rtl8169_pci_tbl makes the card work. Link: http://launchpad.net/bugs/1788730 Signed-off-by: Anthony Wong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03ip6_tunnel: respect ttl inherit for ip6tnlHangbin Liu1-1/+9
man ip-tunnel ttl section says: 0 is a special value meaning that packets inherit the TTL value. IPv4 tunnel respect this in ip_tunnel_xmit(), but IPv6 tunnel has not implement it yet. To make IPv6 behave consistently with IP tunnel, add ipv6 tunnel inherit support. Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-03ALSA: hda: Fix several mismatch for register mask and valueKeyon Jie1-15/+7
E.g. for snd_hdac_ext_link_clear_stream_id(), we should set (1 << stream) as mask, and 0 as value, here correct it and several similar mismatches. And, here also remove unreadable register_mask usage for those mask value updating. Signed-off-by: Keyon Jie <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-09-03apparmor: fix bad debug check in apparmor_secid_to_secctx()John Johansen1-1/+0
apparmor_secid_to_secctx() has a bad debug statement tripping on a condition handle by the code. When kconfig SECURITY_APPARMOR_DEBUG is enabled the debug WARN_ON will trip when **secdata is NULL resulting in the following trace. ------------[ cut here ]------------ AppArmor WARN apparmor_secid_to_secctx: ((!secdata)): WARNING: CPU: 0 PID: 14826 at security/apparmor/secid.c:82 apparmor_secid_to_secctx+0x2b5/0x2f0 security/apparmor/secid.c:82 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 14826 Comm: syz-executor1 Not tainted 4.19.0-rc1+ #193 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:993 RIP: 0010:apparmor_secid_to_secctx+0x2b5/0x2f0 security/apparmor/secid.c:82 Code: c7 c7 40 66 58 87 e8 6a 6d 0f fe 0f 0b e9 6c fe ff ff e8 3e aa 44 fe 48 c7 c6 80 67 58 87 48 c7 c7 a0 65 58 87 e8 4b 6d 0f fe <0f> 0b e9 3f fe ff ff 48 89 df e8 fc a7 83 fe e9 ed fe ff ff bb f4 RSP: 0018:ffff8801ba1bed10 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8801ba1beed0 RCX: ffffc9000227e000 RDX: 0000000000018482 RSI: ffffffff8163ac01 RDI: 0000000000000001 RBP: ffff8801ba1bed30 R08: ffff8801b80ec080 R09: ffffed003b603eca R10: ffffed003b603eca R11: ffff8801db01f657 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8801ba1beed0 security_secid_to_secctx+0x63/0xc0 security/security.c:1314 ctnetlink_secctx_size net/netfilter/nf_conntrack_netlink.c:621 [inline] ctnetlink_nlmsg_size net/netfilter/nf_conntrack_netlink.c:659 [inline] ctnetlink_conntrack_event+0x303/0x1470 net/netfilter/nf_conntrack_netlink.c:706 nf_conntrack_eventmask_report+0x55f/0x930 net/netfilter/nf_conntrack_ecache.c:151 nf_conntrack_event_report include/net/netfilter/nf_conntrack_ecache.h:112 [inline] nf_ct_delete+0x33c/0x5d0 net/netfilter/nf_conntrack_core.c:601 nf_ct_iterate_cleanup+0x48c/0x5e0 net/netfilter/nf_conntrack_core.c:1892 nf_ct_iterate_cleanup_net+0x23c/0x2d0 net/netfilter/nf_conntrack_core.c:1974 ctnetlink_flush_conntrack net/netfilter/nf_conntrack_netlink.c:1226 [inline] ctnetlink_del_conntrack+0x66c/0x850 net/netfilter/nf_conntrack_netlink.c:1258 nfnetlink_rcv_msg+0xd88/0x1070 net/netfilter/nfnetlink.c:228 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 nfnetlink_rcv+0x1c0/0x4d0 net/netfilter/nfnetlink.c:560 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:631 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2114 __sys_sendmsg+0x11d/0x290 net/socket.c:2152 __do_sys_sendmsg net/socket.c:2161 [inline] __se_sys_sendmsg net/socket.c:2159 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2159 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7bc6e03c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f7bc6e046d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020d65000 RDI: 0000000000000003 RBP: 00000000009300a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d4588 R14: 00000000004c8d5c R15: 0000000000000000 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. CC: <[email protected]> #4.18 Fixes: c092921219d2 ("apparmor: add support for mapping secids and using secctxes") Reported-by: [email protected] Signed-off-by: John Johansen <[email protected]>
2018-09-03ALSA: rawmidi: Initialize allocated buffersTakashi Iwai1-2/+2
syzbot reported the uninitialized value exposure in certain situations using virmidi loop. It's likely a very small race at writing and reading, and the influence is almost negligible. But it's safer to paper over this just by replacing the existing kvmalloc() with kvzalloc(). Reported-by: [email protected] Signed-off-by: Takashi Iwai <[email protected]>
2018-09-03fsnotify: fix ignore mask logic in fsnotify()Amir Goldstein1-10/+3
Commit 92183a42898d ("fsnotify: fix ignore mask logic in send_to_group()") acknoledges the use case of ignoring an event on an inode mark, because of an ignore mask on a mount mark of the same group (i.e. I want to get all events on this file, except for the events that came from that mount). This change depends on correctly merging the inode marks and mount marks group lists, so that the mount mark ignore mask would be tested in send_to_group(). Alas, the merging of the lists did not take into account the case where event in question is not in the mask of any of the mount marks. To fix this, completely remove the tests for inode and mount event masks from the lists merging code. Fixes: 92183a42898d ("fsnotify: fix ignore mask logic in send_to_group") Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Jan Kara <[email protected]>
2018-09-03timekeeping: Fix declaration of read_persistent_wall_and_boot_offset()Christian Borntraeger1-2/+2
It is read_persistent_wall_and_boot_offset() and not read_persistent_clock_and_boot_offset() Fixes: 3eca993740b8eb40f51 ("timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()") Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pavel Tatashin <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-09-03x86: Fix kernel-doc atomic.h warningsRandy Dunlap3-16/+16
Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by having a #define macro between the kernel-doc notation and the function name. Fixed by moving the #define macro to after the function implementation. Make the same change for atomic64_{32,64}.h for consistency even though there were no kernel-doc warnings found in these header files, but there would be if they were used in generation of documentation. Fixes these kernel-doc warnings: ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc' ../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec' ../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test' ../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative' Fixes: 18cc1814d4e7 ("atomics/treewide: Make test ops optional") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Mark Rutland <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-09-03mac80211: shorten the IBSS debug messagesEmmanuel Grumbach1-11/+11
When tracing is enabled, all the debug messages are recorded and must not exceed MAX_MSG_LEN (100) columns. Longer debug messages grant the user with: WARNING: CPU: 3 PID: 32642 at /tmp/wifi-core-20180806094828/src/iwlwifi-stack-dev/net/mac80211/./trace_msg.h:32 trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Workqueue: phy1 ieee80211_iface_work [mac80211] RIP: 0010:trace_event_raw_event_mac80211_msg_event+0xab/0xc0 [mac80211] Call Trace: __sdata_dbg+0xbd/0x120 [mac80211] ieee80211_ibss_rx_queued_mgmt+0x15f/0x510 [mac80211] ieee80211_iface_work+0x21d/0x320 [mac80211] Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03mac80211: don't Tx a deauth frame if the AP forbade TxEmmanuel Grumbach1-2/+15
If the driver fails to properly prepare for the channel switch, mac80211 will disconnect. If the CSA IE had mode set to 1, it means that the clients are not allowed to send any Tx on the current channel, and that includes the deauthentication frame. Make sure that we don't send the deauthentication frame in this case. In iwlwifi, this caused a failure to flush queues since the firmware already closed the queues after having parsed the CSA IE. Then mac80211 would wait until the deauthentication frame would go out (drv_flush(drop=false)) and that would never happen. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03mac80211: Fix station bandwidth setting after channel switchIlan Peer1-0/+53
When performing a channel switch flow for a managed interface, the flow did not update the bandwidth of the AP station and the rate scale algorithm. In case of a channel width downgrade, this would result with the rate scale algorithm using a bandwidth that does not match the interface channel configuration. Fix this by updating the AP station bandwidth and rate scaling algorithm before the actual channel change in case of a bandwidth downgrade, or after the actual channel change in case of a bandwidth upgrade. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03mac80211: fix a race between restart and CSA flowsEmmanuel Grumbach1-1/+20
We hit a problem with iwlwifi that was caused by a bug in mac80211. A bug in iwlwifi caused the firwmare to crash in certain cases in channel switch. Because of that bug, drv_pre_channel_switch would fail and trigger the restart flow. Now we had the hw restart worker which runs on the system's workqueue and the csa_connection_drop_work worker that runs on mac80211's workqueue that can run together. This is obviously problematic since the restart work wants to reconfigure the connection, while the csa_connection_drop_work worker does the exact opposite: it tries to disconnect. Fix this by cancelling the csa_connection_drop_work worker in the restart worker. Note that this can sound racy: we could have: driver iface_work CSA_work restart_work +++++++++++++++++++++++++++++++++++++++++++++ | <--drv_cs ---| <FW CRASH!> -CS FAILED--> | | | cancel_work(CSA) schedule | CSA work | | | Race between those 2 But this is not possible because we flush the workqueue in the restart worker before we cancel the CSA worker. That would be bullet proof if we could guarantee that we schedule the CSA worker only from the iface_work which runs on the workqueue (and not on the system's workqueue), but unfortunately we do have an instance in which we schedule the CSA work outside the context of the workqueue (ieee80211_chswitch_done). Note also that we should probably cancel other workers like beacon_connection_loss_work and possibly others for different types of interfaces, at the very least, IBSS should suffer from the exact same problem, but for now, do the minimum to fix the actual bug that was actually experienced and reproduced. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03mac80211: fix WMM TXOP calculationDreyfuss, Haim1-2/+1
In commit 9236c4523e5b ("mac80211: limit wmm params to comply with ETSI requirements"), we have limited the WMM parameters to comply with 802.11 and ETSI standard. Mistakenly the TXOP value was caluclated wrong. Fix it by taking the minimum between 802.11 to ETSI to make sure we are not violating both. Fixes: e552af058148 ("mac80211: limit wmm params to comply with ETSI requirements") Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03cfg80211: fix a type issue in ieee80211_chandef_to_operating_class()Dan Carpenter1-1/+1
The "chandef->center_freq1" variable is a u32 but "freq" is a u16 so we are truncating away the high bits. I noticed this bug because in commit 9cf0a0b4b64a ("cfg80211: Add support for 60GHz band channels 5 and 6") we made "freq <= 56160 + 2160 * 6" a valid requency when before it was only "freq <= 56160 + 2160 * 4" that was valid. It introduces a static checker warning: net/wireless/util.c:1571 ieee80211_chandef_to_operating_class() warn: always true condition '(freq <= 56160 + 2160 * 6) => (0-u16max <= 69120)' But really we probably shouldn't have been truncating the high bits away to begin with. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03mac80211: fix an off-by-one issue in A-MSDU max_subframe computationLorenzo Bianconi1-1/+1
Initialize 'n' to 2 in order to take into account also the first packet in the estimation of max_subframe limit for a given A-MSDU since frag_tail pointer is NULL when ieee80211_amsdu_aggregate routine analyzes the second frame. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-09-03ovl: add ovl_fadvise()Amir Goldstein1-0/+20
Implement stacked fadvise to fix syscalls readahead(2) and fadvise64(2) on an overlayfs file. Suggested-by: Miklos Szeredi <[email protected]> Fixes: d1d04ef8572b ("ovl: stack file ops") Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]>
2018-09-03drm/i915/gvt: Give new born vGPU higher scheduling chanceZhenyu Wang1-7/+27
This trys to give new born vGPU with higher scheduling chance not only with adding to sched list head and also have higher priority for workload sched for 2 seconds after starting to schedule it. In order for fast GPU execution during VM boot, and ensure guest driver setup with required state given in time. This fixes recent failure seen on one VM with multiple linux VMs running on kernel with commit 2621cefaa42b3("drm/i915: Provide a timeout to i915_gem_wait_for_idle() on setup"), which had shorter setup timeout that caused context state init failed. v2: change to 2s for higher scheduling period Cc: Yuan Hang <[email protected]> Reviewed-by: Hang Yuan <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2018-09-02cifs: connect to servername instead of IP for IPC$ shareThomas Werschlein1-1/+1
This patch is required allows access to a Microsoft fileserver failover cluster behind a 1:1 NAT firewall. The change also provides stronger context for authentication and share connection (see MS-SMB2 3.3.5.7 and MS-SRVS 3.1.6.8) as noted by Tom Talpey, and addresses comments about the buffer size for the UNC made by Aurélien Aptel. Signed-off-by: Thomas Werschlein <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Tom Talpey <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> CC: Stable <[email protected]>
2018-09-02smb3: check for and properly advertise directory lease supportSteve French2-5/+8
Although servers will typically ignore unsupported features, we should advertise the support for directory leases (as Windows e.g. does) in the negotiate protocol capabilities we pass to the server, and should check for the server capability (CAP_DIRECTORY_LEASING) before sending a lease request for an open of a directory. This will prevent us from accidentally sending directory leases to SMB2.1 or SMB2 server for example. Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-09-02smb3: minor debugging clarifications in rfc1001 len processingSteve French1-5/+9
I ran into some cases where server was returning the wrong length on frames but I couldn't easily match them to the command in the network trace (or server logs) since I need the command and/or multiplex id to find the offending SMB2/SMB3 command. Add these two fields to the log message. In the case of padding too much it may not be a problem in all cases but might have correlated to a network disconnect case in some problems we have been looking at. In the case of frame too short is even more important. Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-09-02SMB3: Backup intent flag missing for directory opens with backupuid mountsSteve French2-5/+22
When "backup intent" is requested on the mount (e.g. backupuid or backupgid mount options), the corresponding flag needs to be set on opens of directories (and files) but was missing in some places causing access denied trying to enumerate and backup servers. Fixes kernel bugzilla #200953 https://bugzilla.kernel.org/show_bug.cgi?id=200953 Reported-and-tested-by: <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2018-09-02fs/cifs: don't translate SFM_SLASH (U+F026) to backslashJon Kuhn1-3/+0
When a Mac client saves an item containing a backslash to a file server the backslash is represented in the CIFS/SMB protocol as as U+F026. Before this change, listing a directory containing an item with a backslash in its name will return that item with the backslash represented with a true backslash character (U+005C) because convert_sfm_character mapped U+F026 to U+005C when interpretting the CIFS/SMB protocol response. However, attempting to open or stat the path using a true backslash will result in an error because convert_to_sfm_char does not map U+005C back to U+F026 causing the CIFS/SMB request to be made with the backslash represented as U+005C. This change simply prevents the U+F026 to U+005C conversion from happenning. This is analogous to how the code does not do any translation of UNI_SLASH (U+F000). Signed-off-by: Jon Kuhn <[email protected]> Signed-off-by: Steve French <[email protected]>
2018-09-02Merge tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds4-2/+13
Pull dma-mapping fixes from Christoph Hellwig: "A few fixes for the fallout of being a little more pedantic about dma masks" * tag 'dma-mapping-4.19-2' of git://git.infradead.org/users/hch/dma-mapping: of/platform: initialise AMBA default DMA masks sparc: set a default 32-bit dma mask for OF devices kernel/dma/direct: take DMA offset into account in dma_direct_supported
2018-09-03m68k: fix early memory reservation for ColdFire MMU systemsMike Rapoport1-1/+1
The bootmem to memblock conversion introduced by the commit 1008a11590b9 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") made reservation of kernel code and data to start from a wrong address. Fix it. Signed-off-by: Mike Rapoport <[email protected]> Tested-by: Angelo Dureghello <[email protected]> Signed-off-by: Greg Ungerer <[email protected]>
2018-09-02uapi: Fix linux/rds.h userspace compilation errors.Vinson Lee1-0/+1
Include linux/in6.h for struct in6_addr. /usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type struct in6_addr laddr; ^~~~~ /usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type struct in6_addr faddr; ^~~~~ /usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type struct in6_addr bound_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type struct in6_addr connected_addr; ^~~~~~~~~~~~~~ /usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type struct in6_addr local_addr; ^~~~~~~~~~ /usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type struct in6_addr peer_addr; ^~~~~~~~~ /usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type struct in6_addr src_addr; ^~~~~~~~ /usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type struct in6_addr dst_addr; ^~~~~~~~ Fixes: b7ff8b1036f0 ("rds: Extend RDS API for IPv6 support") Signed-off-by: Vinson Lee <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-02net: cadence: Fix a sleep-in-atomic-context bug in macb_halt_tx()Jia-Ju Bai1-1/+1
The kernel module may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] usleep_range drivers/net/ethernet/cadence/macb_main.c, 648: usleep_range in macb_halt_tx drivers/net/ethernet/cadence/macb_main.c, 730: macb_halt_tx in macb_tx_error_task drivers/net/ethernet/cadence/macb_main.c, 721: _raw_spin_lock_irqsave in macb_tx_error_task To fix this bug, usleep_range() is replaced with udelay(). This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller3-5/+15
Daniel Borkmann says: ==================== pull-request: bpf 2018-09-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix one remaining buggy offset override in sockmap's bpf_msg_pull_data() when linearizing multiple scatterlist elements, from Tushar. 2) Fix BPF sockmap's misuse of ULP when a collision with another ULP is found on map update where it would release existing ULP. syzbot found and triggered this couple of times now, fix from John. 3) Add missing xskmap type to bpftool so it will properly show the type on map dump, from Prashant. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-09-02i2c: imx-lpi2c: Remove mx8dv compatible entryFabio Estevam1-1/+0
mx8dv never entered into production and there is no other place in the kernel referring to this SoC, so remove it from the driver's compatible entry. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-09-02dt-bindings: imx-lpi2c: Remove mx8dv compatible entryFabio Estevam1-2/+1
mx8dv never entered into production and there is no other place in the kernel referring to this SoC, so remove it from the dt bindings documentation. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-09-02i2c: uniphier-f: issue STOP only for last message or I2C_M_STOPMasahiro Yamada1-5/+2
This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver") Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-09-02i2c: uniphier: issue STOP only for last message or I2C_M_STOPMasahiro Yamada1-5/+2
This driver currently emits a STOP if the next message is not I2C_MD_RD. It should not do it because it disturbs the I2C_RDWR ioctl, where read/write transactions are combined without STOP between. Issue STOP only when the message is the last one _or_ flagged with I2C_M_STOP. Fixes: dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-09-02Linux 4.19-rc2Linus Torvalds1-1/+1
2018-09-02net/ipv6: Only update MTU metric if it setDavid Ahern1-1/+4
Jan reported a regression after an update to 4.18.5. In this case ipv6 default route is setup by systemd-networkd based on data from an RA. The RA contains an MTU of 1492 which is used when the route is first inserted but then systemd-networkd pushes down updates to the default route without the mtu set. Prior to the change to fib6_info, metrics such as MTU were held in the dst_entry and rt6i_pmtu in rt6_info contained an update to the mtu if any. ip6_mtu would look at rt6i_pmtu first and use it if set. If not, the value from the metrics is used if it is set and finally falling back to the idev value. After the fib6_info change metrics are contained in the fib6_info struct and there is no equivalent to rt6i_pmtu. To maintain consistency with the old behavior the new code should only reset the MTU in the metrics if the route update has it set. Fixes: d4ead6b34b67 ("net/ipv6: move metrics from dst to rt6_info") Reported-by: Jan Janssen <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-02net: ethernet: cpsw-phy-sel: prefer phandle for phy selTony Lindgren1-3/+6
The cpsw-phy-sel device is not a child of the cpsw interconnect target module. It lives in the system control module. Let's fix this issue by trying to use cpsw-phy-sel phandle first if it exists and if not fall back to current usage of trying to find the cpsw-phy-sel child. That way the phy sel driver can be a child of the system control module where it belongs in the device tree. Without this fix, we cannot have a proper interconnect target module hierarchy in device tree for things like genpd. Note that deferred probe is mostly not supported by cpsw and this patch does not attempt to fix that. In case deferred probe support is needed, this could be added to cpsw_slave_open() and phy_connect() so they start handling and returning errors. For documenting it, looks like the cpsw-phy-sel is used for all cpsw device tree nodes. It's missing the related binding documentation, so let's also update the binding documentation accordingly. Cc: [email protected] Cc: Andrew Lunn <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Ivan Khoronzhuk <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-02dt-bindings: net: cpsw: Document cpsw-phy-sel usage but prefer phandleTony Lindgren1-0/+6
The current cpsw usage for cpsw-phy-sel is undocumented but is used for all the boards using cpsw. And cpsw-phy-sel is not really a child of the cpsw device, it lives in the system control module instead. Let's document the existing usage, and improve it a bit where we prefer to use a phandle instead of a child device for it. That way we can properly describe the hardware in dts files for things like genpd. Cc: [email protected] Cc: Andrew Lunn <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Ivan Khoronzhuk <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Murali Karicheri <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.