aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-21net/sched: act_connmark: validate the control action inside init()Davide Caratti2-3/+43
the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action connmark pass index 90 # tc actions replace action connmark \ > goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action connmark had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: connmark zone 0 goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0 RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00 R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40 FS: 0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_connmark_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: act_mirred: validate the control action inside init()Davide Caratti2-4/+42
the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action mirred ingress mirror dev lo pass # tc actions replace action mirred \ > ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action mirred had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: mirred (Ingress Mirror to device lo) goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: Mirror/redirect action on BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380 RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029 R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000 R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00 FS: 0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_mirred_init() proved to fix the above issue. For the same reason, postpone the assignment of tcfa_action and tcfm_eaction to avoid partial reconfiguration of a mirred rule when it's replaced by another one that mirrors to a device that does not exist. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: act_ife: validate the control action inside init()Davide Caratti2-13/+45
the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action ife encode allow mark pass index 90 # tc actions replace action ife \ > encode allow mark goto chain 42 index 90 cookie c1a0c1a0 # tc action show action ife had the following output: IFE type 0xED3E IFE type 0xED3E Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: ife encode action goto chain 42 type 0XED3E allow mark index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700 R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800 FS: 0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ndisc_next_option+0x50/0x50 ? ___neigh_create+0x4d5/0x680 ? ip6_finish_output2+0x1b5/0x590 ip6_finish_output2+0x1b5/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.28+0x79/0xc0 ndisc_send_skb+0x248/0x2e0 ndisc_send_ns+0xf8/0x200 ? addrconf_dad_work+0x389/0x4b0 addrconf_dad_work+0x389/0x4b0 ? __switch_to_asm+0x34/0x70 ? process_one_work+0x195/0x380 ? addrconf_dad_completed+0x370/0x370 process_one_work+0x195/0x380 worker_thread+0x30/0x390 ? process_one_work+0x380/0x380 kthread+0x113/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife] CR2: 0000000000000000 Validating the control action within tcf_ife_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: act_gact: validate the control action inside init()Davide Caratti2-1/+37
the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall \ > action gact pass index 90 # tc actions replace action gact \ > goto chain 42 index 90 cookie c1a0c1a0 # tc actions show action gact had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: gact action goto chain 42 random type none pass val 0 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00 RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00 R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480 FS: 0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002 RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020 R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_secondary+0x1a7/0x200 secondary_startup_64+0xa4/0xb0 Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf] CR2: 0000000000000000 Validating the control action within tcf_gact_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: act_csum: validate the control action inside init()Davide Caratti2-3/+42
the following script: # tc qdisc add dev crash0 clsact # tc filter add dev crash0 egress matchall action csum icmp pass index 90 # tc actions replace action csum icmp goto chain 42 index 90 \ > cookie c1a0c1a0 # tc actions show action csum had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: csum (icmp) action goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffff93153da03be0 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00 RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818 RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003 R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400 R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600 FS: 0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0 Call Trace: <IRQ> tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip6_finish_output2+0x369/0x590 ip6_finish_output2+0x369/0x590 ? ip6_output+0x68/0x110 ip6_output+0x68/0x110 ? nf_hook.constprop.35+0x79/0xc0 mld_sendpack+0x16f/0x220 mld_ifc_timer_expire+0x195/0x2c0 ? igmp6_timer_handler+0x70/0x70 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? tick_sched_timer+0x37/0x70 __do_softirq+0xe3/0x2f5 irq_exit+0xf0/0x100 smp_apic_timer_interrupt+0x6c/0x130 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:native_safe_halt+0x2/0x10 Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90 RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000 RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000 R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ? __sched_text_end+0x1/0x1 default_idle+0x1c/0x140 do_idle+0x1c4/0x280 cpu_startup_entry+0x19/0x20 start_kernel+0x49e/0x4be secondary_startup_64+0xa4/0xb0 Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_csum_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: act_bpf: validate the control action inside init()Davide Caratti2-5/+43
the following script: # tc filter add dev crash0 egress matchall \ > action bpf bytecode '1,6 0 0 4294967295' pass index 90 # tc actions replace action bpf \ > bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0 # tc action show action bpf had the following output: Error: Failed to init TC action chain. We have an error talking to the kernel total acts 1 action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42 index 90 ref 2 bind 1 cookie c1a0c1a0 Then, the first packet transmitted by crash0 made the kernel crash: RIP: 0010:tcf_action_exec+0xb8/0x100 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246 RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00 RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00 R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00 FS: 00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0 Call Trace: tcf_classify+0x58/0x120 __dev_queue_xmit+0x40a/0x890 ? ip_finish_output2+0x16f/0x430 ip_finish_output2+0x16f/0x430 ? ip_output+0x69/0xe0 ip_output+0x69/0xe0 ? ip_forward_options+0x1a0/0x1a0 ip_send_skb+0x15/0x40 raw_sendmsg+0x8e1/0xbd0 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0xc/0xa0 ? try_to_wake_up+0x54/0x480 ? ldsem_down_read+0x3f/0x280 ? _cond_resched+0x15/0x40 ? down_read+0xe/0x30 ? copy_termios+0x1e/0x70 ? tty_mode_ioctl+0x1b6/0x4c0 ? sock_sendmsg+0x36/0x40 sock_sendmsg+0x36/0x40 __sys_sendto+0x10e/0x140 ? do_vfs_ioctl+0xa4/0x640 ? handle_mm_fault+0xdc/0x210 ? syscall_trace_enter+0x1df/0x2e0 ? __audit_syscall_exit+0x216/0x260 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f615f7e3c03 Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24 RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03 RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003 RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080 Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod CR2: 0000000000000000 Validating the control action within tcf_bpf_init() proved to fix the above issue. A TDC selftest is added to verify the correct behavior. Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net/sched: prepare TC actions to properly validate the control actionDavide Caratti18-56/+84
- pass a pointer to struct tcf_proto in each actions's init() handler, to allow validating the control action, checking whether the chain exists and (eventually) refcounting it. - remove code that validates the control action after a successful call to the action's init() handler, and replace it with a test that forbids addition of actions having 'goto_chain' and NULL goto_chain pointer at the same time. - add tcf_action_check_ctrlact(), that will validate the control action and eventually allocate the action 'goto_chain' within the init() handler. - add tcf_action_set_ctrlact(), that will assign the control action and swap the current 'goto_chain' pointer with the new given one. This disallows 'goto_chain' on actions that don't initialize it properly in their init() handler, i.e. calling tcf_action_check_ctrlact() after successful IDR reservation and then calling tcf_action_set_ctrlact() to assign 'goto_chain' and 'tcf_action' consistently. By doing this, the kernel does not leak anymore refcounts when a valid 'goto chain' handle is replaced in TC actions, causing kmemleak splats like the following one: # tc chain add dev dd0 chain 42 ingress protocol ip flower \ > ip_proto tcp action drop # tc chain add dev dd0 chain 43 ingress protocol ip flower \ > ip_proto udp action drop # tc filter add dev dd0 ingress matchall \ > action gact goto chain 42 index 66 # tc filter replace dev dd0 ingress matchall \ > action gact goto chain 43 index 66 # echo scan >/sys/kernel/debug/kmemleak <...> unreferenced object 0xffff93c0ee09f000 (size 1024): comm "tc", pid 2565, jiffies 4295339808 (age 65.426s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0 [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0 [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110 [<000000006126a348>] netlink_unicast+0x1a0/0x250 [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0 [<00000000a25a2171>] sock_sendmsg+0x36/0x40 [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0 [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0 [<000000007a6c61f9>] do_syscall_64+0x5b/0x180 [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<0000000013eaa334>] 0xffffffffffffffff Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain") Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net: macb: Add null check for PCLK and HCLKHarini Katakam1-2/+8
Both PCLK and HCLK are "required" clocks according to macb devicetree documentation. There is a chance that devm_clk_get doesn't return a negative error but just a NULL clock structure instead. In such a case the driver proceeds as usual and uses pclk value 0 to calculate MDC divisor which is incorrect. Hence fix the same in clock initialization. Signed-off-by: Harini Katakam <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21net: phy: Add DP83825I to the DP83822 driverDan Murphy1-14/+20
Add the DP83825I ethernet PHY to the DP83822 driver. These devices share the same WoL register bits and addresses. The phy_driver init was made into a macro as there may be future devices appended to this driver that will share the register space. http://www.ti.com/lit/gpn/dp83825i Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Dan Murphy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21Merge tag 'arm64-fixes' of ↵Linus Torvalds5-27/+38
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "Mostly fixes apart from the kprobe blacklist checking which was deferred because of conflicting with a fix merged after I pinned the arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always blacklist the KVM world-switch code"). Summary: - Update the kprobe blacklist checking for arm64. This was supposed to be queued during the merging window but, due to conflicts, it was deferred post -rc1 - Extend the Fujitsu erratum 010001 workaround to A64FX v1r0 - Whitelist HiSilicon Taishan v110 CPUs as not susceptible to Meltdown - Export save_stack_trace_regs() - Remove obsolete selection of MULTI_IRQ_HANDLER" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: remove obsolete selection of MULTI_IRQ_HANDLER arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs arm64: Add MIDR encoding for HiSilicon Taishan CPUs arm64/stacktrace: Export save_stack_trace_regs() arm64: apply workaround on A64FX v1r0 arm64: kprobes: Use arch_populate_kprobe_blacklist() arm64: kprobes: Move exception_text check in blacklist arm64: kprobes: Remove unneeded RODATA check arm64: kprobes: Move extable address check into arch_prepare_kprobe()
2019-03-21Merge tag 'selinux-pr-20190321' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "Another small SELinux fix for v5.1" * tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix NULL dereference in policydb_destroy()
2019-03-21Merge tag 'fixes_for_v5.1-rc2' of ↵Linus Torvalds3-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull udf fixes from Jan Kara: "Two udf error handling fixes" * tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Propagate errors from udf_truncate_extents() udf: Fix crash on IO error during truncate
2019-03-21Merge tag 'fsnotify_for_v5.1-rc2' of ↵Linus Torvalds2-3/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify fixes from Jan Kara: "One inotify and one fanotify fix" * tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Allow copying of file handle to userspace inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()
2019-03-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller10-34/+54
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Remove a direct dependency with IPv6 introduced by the sip_external_media feature, from Alin Nastac. 2) Fix bogus ENOENT when removing interval elements from set. 3) Set transport_header from br_netfilter to mimic the stack behaviour, this partially fixes a checksum validation bug from the SCTP connection tracking, from Xin Long. 4) Fix undefined reference to symbol in xt_TEE, due to missing Kconfig dependencies, from Arnd Bergmann. 5) Check for NULL in skb_header_pointer() calls in ip6t_shr, from Kangjie Lu. 6) Fix bogus EBUSY when removing an existing conntrack helper from a transaction. 7) Fix module autoload of the redirect extension. 8) Remove duplicated transition in flowtable diagram in the existing documentation. 9) Missing .release_ops call from error path in newrule() which results module refcount leak, from Taehee Yoo. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-03-21genetlink: Fix a memory leak on error pathYueHaibing1-1/+2
In genl_register_family(), when idr_alloc() fails, we forget to free the memory we possibly allocate for family->attrbuf. Reported-by: Hulk Robot <[email protected]> Fixes: 2ae0f17df1cd ("genetlink: use idr to track families") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Kirill Tkhai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21tipc: fix cancellation of topology subscriptionsErik Hugne1-0/+1
When cancelling a subscription, we have to clear the cancel bit in the request before iterating over any established subscriptions with memcmp. Otherwise no subscription will ever be found, and it will not be possible to explicitly unsubscribe individual subscriptions. Fixes: 8985ecc7c1e0 ("tipc: simplify endianness handling in topology subscriber") Signed-off-by: Erik Hugne <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-03-21irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps staticYueHaibing1-1/+1
Fix sparse warning: drivers/irqchip/irq-mvebu-sei.c:481:23: warning: symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static? Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-21perf bpf: Show more BPF program info in print_bpf_prog_info()Song Liu3-3/+53
This patch enables showing bpf program name, address, and size in the header. Before the patch: perf report --header-only ... # bpf_prog_info of id 9 # bpf_prog_info of id 10 # bpf_prog_info of id 13 After the patch: # bpf_prog_info 9: bpf_prog_7be49e3934a125ba addr 0xffffffffa0024947 size 229 # bpf_prog_info 10: bpf_prog_2a142ef67aaad174 addr 0xffffffffa007c94d size 229 # bpf_prog_info 13: bpf_prog_47368425825d7384_task__task_newt addr 0xffffffffa0251137 size 369 Committer notes: Fix the fallback definition when HAVE_LIBBPF_SUPPORT is not defined, i.e. add the missing 'static inline' and add the __maybe_unused to the args. Also add stdio.h since we now use FILE * in bpf-event.h. Signed-off-by: Song Liu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-21perf bpf: Extract logic to create program names from ↵Song Liu1-27/+35
perf_event__synthesize_one_bpf_prog() Extract logic to create program names to synthesize_bpf_prog_name(), so that it can be reused in header.c:print_bpf_prog_info(). This commit doesn't change the behavior. Signed-off-by: Song Liu <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-21perf tools: Save bpf_prog_info and BTF of new BPF programsSong Liu28-24/+145
To fully annotate BPF programs with source code mapping, 4 different information are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf This patch handles 3) and 4) for BPF programs loaded after 'perf record|top'. For timely process of these information, a dedicated event is added to the side band evlist. When PERF_RECORD_BPF_EVENT is received via the side band event, the polling thread gathers 3) and 4) vis sys_bpf and store them in perf_env. This information is saved to perf.data at the end of 'perf record'. Committer testing: The 'wakeup_watermark' member in 'struct perf_event_attr' is inside a unnamed union, so can't be used in a struct designated initialization with older gccs, get it out of that, isolating as 'attr.wakeup_watermark = 1;' to work with all gcc versions. We also need to add '--no-bpf-event' to the 'perf record' perf_event_attr tests in 'perf test', as the way that that test goes is to intercept the events being setup and looking if they match the fields described in the control files, since now it finds first the side band event used to catch the PERF_RECORD_BPF_EVENT, they all fail. With these issues fixed: Same scenario as for testing BPF programs loaded before 'perf record' or 'perf top' starts, only start the BPF programs after 'perf record|top', so that its information get collected by the sideband threads, the rest works as for the programs loaded before start monitoring. Add missing 'inline' to the bpf_event__add_sb_event() when HAVE_LIBBPF_SUPPORT is not defined, fixing the build in systems without binutils devel files installed. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-21perf evlist: Introduce side band threadSong Liu5-0/+155
This patch introduces side band thread that captures extended information for events like PERF_RECORD_BPF_EVENT. This new thread uses its own evlist that uses ring buffer with very low watermark for lower latency. To use side band thread, we need to: 1. add side band event(s) by calling perf_evlist__add_sb_event(); 2. calls perf_evlist__start_sb_thread(); 3. at the end of perf run, perf_evlist__stop_sb_thread(). In the next patch, we use this thread to handle PERF_RECORD_BPF_EVENT. Committer notes: Add fix by Jiri Olsa for when te sb_tread can't get started and then at the end the stop_sb_thread() segfaults when joining the (non-existing) thread. That can happen when running 'perf top' or 'perf record' as a normal user, for instance. Further checks need to be done on top of this to more graciously handle these possible failure scenarios. Signed-off-by: Song Liu <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stanislav Fomichev <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-03-21Merge tag 'irqchip-5.1-2' of ↵Thomas Gleixner10-48/+32
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates for 5.1 from Marc Zyngier: - irqsteer error handling fix - GICv3 range coalescing fix - stm32 coprocessor coexistence fixes - mbigen MSI teardown fix - non-DT secondary GIC infrastructure removed - various cleanups (brcmstb-l2, mmp) - new DT bindings (r8a774c0)
2019-03-21x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processorsMatthew Whitehead1-21/+0
The getCx86_old() and setCx86_old() macros have been replaced with correctly working getCx86() and setCx86(), so remove these unused macros. Signed-off-by: Matthew Whitehead <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processorsMatthew Whitehead1-7/+7
There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Tested on an actual Geode processor. Signed-off-by: Matthew Whitehead <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/microcode: Announce reload operation's completionBorislav Petkov1-0/+2
By popular demand, issue a single line to dmesg after the reload operation completes to let the user know that a reload has at least been attempted. Signed-off-by: Borislav Petkov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/hyperv: Prevent potential NULL pointer dereferenceKangjie Lu1-1/+5
The page allocation in hv_cpu_init() can fail, but the code does not have a check for that. Add a check and return -ENOMEM when the allocation fails. [ tglx: Massaged changelog ] Signed-off-by: Kangjie Lu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Acked-by: "K. Y. Srinivasan" <[email protected]> Cc: [email protected] Cc: Haiyang Zhang <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Sasha Levin <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/hpet: Prevent potential NULL pointer dereferenceAditya Pakki1-0/+2
hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check. Add a check to prevent NULL pointer dereference. Signed-off-by: Aditya Pakki <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Kees Cook <[email protected]> Cc: Joe Perches <[email protected]> Cc: Nicolai Stange <[email protected]> Cc: Roland Dreier <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/lib: Fix indentation issue, remove extra tabColin Ian King1-1/+1
The increment of buff is indented one level too deeply, clean this up by removing a tab. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H . Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-03-21x86/boot: Restrict header scope to make Clang happyNick Desaulniers1-1/+2
The inclusion of <linux/kernel.h> was causing issue as the definition of __arch_hweight64 from arch/x86/include/asm/arch_hweight.h eventually gets included. The definition is problematic when compiled with -m16 (all code in arch/x86/boot/ is) as the "D" inline assembly constraint is rejected by both compilers when passed an argument of type long long (regardless of signedness, anything smaller is fine). Because GCC performs inlining before semantic analysis, and __arch_hweight64 is dead in this translation unit, GCC does not report any issues at compile time. Clang does the semantic analysis in the front end, before inlining (run in the middle) can determine the code is dead. I consider this another case of PR33587, which I think we can do more work to solve. It turns out that arch/x86/boot/string.c doesn't actually need linux/kernel.h, simply linux/limits.h and linux/compiler.h. Suggested-by: Stephen Rothwell <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Cc: [email protected] Cc: [email protected] Cc: "H. Peter Anvin" <[email protected]> Cc: Chao Fan <[email protected]> Cc: Uros Bizjak <[email protected]> Link: https://bugs.llvm.org/show_bug.cgi?id=33587 Link: https://github.com/ClangBuiltLinux/linux/issues/347 Link: https://lkml.kernel.org/r/[email protected]
2019-03-21bpf: do not restore dst_reg when cur_state is freedXu Yu1-1/+1
Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug. Call trace: dump_stack+0xbf/0x12e print_address_description+0x6a/0x280 kasan_report+0x237/0x360 sanitize_ptr_alu+0x85a/0x8d0 adjust_ptr_min_max_vals+0x8f2/0x1ca0 adjust_reg_min_max_vals+0x8ed/0x22e0 do_check+0x1ca6/0x5d00 bpf_check+0x9ca/0x2570 bpf_prog_load+0xc91/0x1030 __se_sys_bpf+0x61e/0x1f00 do_syscall_64+0xc8/0x550 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fault injection trace:  kfree+0xea/0x290  free_func_state+0x4a/0x60  free_verifier_state+0x61/0xe0  push_stack+0x216/0x2f0 <- inject failslab  sanitize_ptr_alu+0x2b1/0x8d0  adjust_ptr_min_max_vals+0x8f2/0x1ca0  adjust_reg_min_max_vals+0x8ed/0x22e0  do_check+0x1ca6/0x5d00  bpf_check+0x9ca/0x2570  bpf_prog_load+0xc91/0x1030  __se_sys_bpf+0x61e/0x1f00  do_syscall_64+0xc8/0x550  entry_SYSCALL_64_after_hwframe+0x49/0xbe When kzalloc() fails in push_stack(), free_verifier_state() will free current verifier state. As push_stack() returns, dst_reg was restored if ptr_is_dst_reg is false. However, as member of the cur_state, dst_reg is also freed, and error occurs when dereferencing dst_reg. Simply fix it by testing ret of push_stack() before restoring dst_reg. Fixes: 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") Signed-off-by: Xu Yu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-03-21irqchip/mbigen: Don't clear eventid when freeing an MSIJianguo Chen1-0/+3
mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number. The eventid clear call trace: free_irq __free_irq irq_shutdown irq_domain_deactivate_irq __irq_domain_deactivate_irq __irq_domain_deactivate_irq msi_domain_deactivate platform_msi_write_msg mbigen_write_msg Signed-off-by: Jianguo Chen <[email protected]> [maz: massaged subject] Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21irqchip/stm32: Don't set rising configuration registers at initFabien Dessenne1-5/+0
The rising configuration status register (rtsr) is not banked. As it is shared with the co-processor, it should not be written at probe time, else the co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21irqchip/stm32: Don't clear rising/falling config registers at initFabien Dessenne1-5/+0
Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost. Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures") Signed-off-by: Loic Pallardy <[email protected]> Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21dt-bindings: irqchip: renesas-irqc: Document r8a774c0 supportFabrizio Castro1-0/+1
Document RZ/G2E (R8A774C0) SoC bindings. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21irqchip/mmp: Make mmp_irq_domain_ops staticYueHaibing1-1/+1
Fix sparse warning: drivers/irqchip/irq-mmp.c:182:29: warning: symbol 'mmp_irq_domain_ops' was not declared. Should it be static? Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21irqchip/brcmstb-l2: Make two init functions staticYueHaibing1-2/+2
Fix sparse warnings: drivers/irqchip/irq-brcmstb-l2.c:278:12: warning: symbol 'brcmstb_l2_edge_intc_of_init' was not declared. Should it be static? drivers/irqchip/irq-brcmstb-l2.c:285:12: warning: symbol 'brcmstb_l2_lvl_intc_of_init' was not declared. Should it be static? Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-03-21objtool: Move objtool_file struct off the stackJosh Poimboeuf1-1/+2
Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73fe7eb ("objtool: Add several performance improvements") Reported-by: Vassili Karpov <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com
2019-03-21workqueue: Only unregister a registered lockdep keyBart Van Assche1-2/+3
The recent change to prevent use after free and a memory leak introduced an unconditional call to wq_unregister_lockdep() in the error handling path. If the lockdep key had not been registered yet, then the lockdep core emits a warning. Only call wq_unregister_lockdep() if wq_register_lockdep() has been called first. Fixes: 009bb421b6ce ("workqueue, lockdep: Fix an alloc_workqueue() error path") Reported-by: [email protected] Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Qian Cai <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-21genirq: Fix typo in comment of IRQD_MOVE_PCNTXTPeter Xu1-1/+1
Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Dou Liyang <[email protected]> Cc: Julien Thierry <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-03-21mmc: renesas_sdhi: limit block count to 16 bit for old revisionsWolfram Sang1-1/+7
R-Car Gen2 has two different SDHI incarnations in the same chip. The older one does not support the recently introduced 32 bit register access to the block count register. Make sure we use this feature only after the first known version. Thanks to the Renesas Testing team for this bug report! Fixes: 5603731a15ef ("mmc: tmio: fix access width of Block Count Register") Reported-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Phong Hoang <[email protected]> Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-03-21mmc: alcor: fix DMA readsDaniel Drake1-6/+19
Setting max_blk_count to 1 here was causing the mmc block layer to always use the MMC_READ_SINGLE_BLOCK command here, which the driver does not DMA-accelerate. Drop the max_blk_ settings here. The mmc host defaults suffice, along with the max_segs and max_seg_size settings, which I have now documented in more detail. Now each MMC command reads 4 512-byte blocks, using DMA instead of PIO. On my SD card, this increases read performance (measured with dd) from 167kb/sec to 4.6mb/sec. Link: http://lkml.kernel.org/r/CAD8Lp47L5T3jnAjBiPs1cQ+yFA3L6LJtgFvMETnBrY63-Zdi2g@mail.gmail.com Signed-off-by: Daniel Drake <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-03-21mmc: sdhci-omap: Set caps2 to indicate no physical write protect pinKishon Vijay Abraham I1-0/+3
After commit 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") and commit 39ee32ce486756f ("mmc: sdhci-omap: drop ->get_ro() implementation"), sdhci-omap relied on SDHCI_PRESENT_STATE to check if the card is read-only, if wp-gpios is not populated in device tree. However SDHCI_PRESENT_STATE in sdhci-omap does not have correct read-only state. sdhci-omap can be used by platforms with both micro SD slot and standard SD slot with physical write protect pin (using GPIO). Set caps2 to MMC_CAP2_NO_WRITE_PROTECT based on if wp-gpios property is populated or not. This fix is required since existing device-tree node doesn't have "disable-wp" property and to preserve old-dt compatibility. Fixes: 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in sdhci_check_ro()") Fixes: 39ee32ce486756f ("mmc: sdhci-omap: drop ->get_ro() implementation") Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-03-21powerpc/security: Fix spectre_v2 reportingMichael Ellerman1-15/+8
When I updated the spectre_v2 reporting to handle software count cache flush I got the logic wrong when there's no software count cache enabled at all. The result is that on systems with the software count cache flush disabled we print: Mitigation: Indirect branch cache disabled, Software count cache flush Which correctly indicates that the count cache is disabled, but incorrectly says the software count cache flush is enabled. The root of the problem is that we are trying to handle all combinations of options. But we know now that we only expect to see the software count cache flush enabled if the other options are false. So split the two cases, which simplifies the logic and fixes the bug. We were also missing a space before "(hardware accelerated)". The result is we see one of: Mitigation: Indirect branch serialisation (kernel only) Mitigation: Indirect branch cache disabled Mitigation: Software count cache flush Mitigation: Software count cache flush (hardware accelerated) Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush") Cc: [email protected] # v4.19+ Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Michael Neuling <[email protected]> Reviewed-by: Diana Craciun <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-03-21mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"Alexander Shiyan1-12/+4
This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <[email protected]> Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-03-21ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286Jian-Hong Pan1-3/+14
Some Acer AIO desktops like Veriton Z6860G, Z4860G and Z4660G cannot record sound from headset MIC. This patch adds the ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk to fix this issue. Fixes: 9f8aefed9623 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G") Fixes: b72f936f6b32 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G") Signed-off-by: Jian-Hong Pan <[email protected]> Reviewed-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-03-20bpf: Only print ref_obj_id for refcounted regMartin KaFai Lau1-2/+11
Naresh reported that test_align fails because of the mismatch at the verbose printout of the register states. The reason is due to the newly added ref_obj_id. ref_obj_id is only useful for refcounted reg. Thus, this patch fixes it by only printing ref_obj_id for refcounted reg. While at it, it also uses comma instead of space to separate between "id" and "ref_obj_id". Fixes: 1b986589680a ("bpf: Fix bpf_tcp_sock and bpf_sk_fullsock issue related to bpf_sk_release") Reported-by: Naresh Kamboju <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-03-21drm/exynos/mixer: fix MIXER shadow registry synchronisation codeAndrzej Hajda1-44/+66
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by: Marian Mihailescu <[email protected]> Signed-off-by: Andrzej Hajda <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2019-03-20scsi: ibmvscsi: Fix empty event pool access during host removalTyrel Datwyler1-6/+16
The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <[email protected]> # v2.6.12+ Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2019-03-20scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaitonTyrel Datwyler1-0/+5
For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <[email protected]> # v4.10+ Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2019-03-20dpaa2-eth: Fix possible access beyond end of arrayIoana Ciocoi Radulescu1-1/+1
Make sure we don't try to enqueue XDP_REDIRECT frames to an inexistent FQ. While it is guaranteed not to have more than one queue per core, having fewer queues than CPUs on an interface is a valid configuration. Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support") Reported-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Ioana Radulescu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.