aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-09-14arm64: pgtable: use a single bit for PTE_WRITE regardless of DBMWill Deacon1-5/+1
Depending on CONFIG_ARM64_HW_AFDBM, we use either bit 57 or 51 of the pte to represent PTE_WRITE. Given that bit 51 is reserved prior to ARMv8.1, we can just use that bit regardless of the config option. That also matches what happens if a kernel configured with ARM64_HW_AFDBM=y is run on a CPU without the DBM functionality. Cc: Julien Grall <[email protected]> Tested-by: Julien Grall <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2015-09-14arm64: Fix pte_modify() to preserve the hardware dirty informationCatalin Marinas1-1/+1
The pte_modify() function with hardware AF/DBM enabled must transfer the hardware dirty information to the software PTE_DIRTY bit. However, it was setting this bit in newprot and the mask does not cover such bit. This patch sets PTE_DIRTY on the original pte which will be preserved in the returned value. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Cc: Julien Grall <[email protected]> Tested-by: Julien Grall <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2015-09-14arm64: Fix the pte_hw_dirty() check when AF/DBM is enabledCatalin Marinas1-2/+2
Commit 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") introduced support for handling hardware updates of the access flag and dirty status. The PTE is automatically dirtied in hardware (if supported) by clearing the PTE_RDONLY bit when the PTE_DBM/PTE_WRITE bit is set. The pte_hw_dirty() macro was added to detect a hardware dirtied pte. The pte_dirty() macro checks for both software PTE_DIRTY and pte_hw_dirty(). Functions like pte_modify() clear the PTE_RDONLY bit since it is meant to be set in set_pte_at() when written to memory. In such cases, pte_hw_dirty() would return true even though such pte is clean. This patch changes pte_hw_dirty() to test the PTE_DBM/PTE_WRITE bit together with PTE_RDONLY. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Reported-by: Julien Grall <[email protected]> Tested-by: Julien Grall <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2015-09-14arm64: dma-mapping: check whether cma area is initialized or notJisheng Zhang1-1/+1
If CMA is turned on and CMA size is set to zero, kernel should behave as if CMA was not enabled at compile time. Every dma allocation should check existence of cma area before requesting memory. Arm has done this by commit e464ef16c4f0 ("arm: dma-mapping: add checking cma area initialized"), also do this for arm64. Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Jisheng Zhang <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2015-09-14x86/ldt: Fix small LDT allocation for XenJan Beulich1-2/+2
While the following commit: 37868fe113 ("x86/ldt: Make modify_ldt synchronous") added a nice comment explaining that Xen needs page-aligned whole page chunks for guest descriptor tables, it then nevertheless used kzalloc() on the small size path. As I'm unaware of guarantees for kmalloc(PAGE_SIZE, ) to return page-aligned memory blocks, I believe this needs to be switched back to __get_free_page() (or better get_zeroed_page()). Signed-off-by: Jan Beulich <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: David Vrabel <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-14clockevents: Remove unused set_mode() callbackViresh Kumar4-96/+30
All users are migrated to the per-state callbacks, get rid of the unused interface and the core support code. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: John Stultz <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <[email protected]>
2015-09-14x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help textIngo Molnar1-11/+12
The CONFIG_VM86 Kconfig help text is actively misleading, so fix it: - Don't mark it 'obsolete' in the text as we'll support the ABI as long as CPUs support it. - Qualify the part about software emulation and mention that for some apps you want a real vm86 mode. - Don't scare users away from the option, instead explain what it does. Reported-by: Stas Sergeev <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Austin S Hemmelgarn <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Josh Boyer <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-14soc: dove: Prepare irq handler for irq argument removalThomas Gleixner1-1/+1
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Jiang Liu <[email protected]> Cc: Gregory CLEMENT <[email protected]>
2015-09-14soc: dove: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descThomas Gleixner1-1/+1
Search and replace done with coccinelle Signed-off-by: Thomas Gleixner <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Jiang Liu <[email protected]>
2015-09-14powerpc/cell: Prepare irq handler for irq argument removalThomas Gleixner1-1/+2
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Jiang Liu <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: [email protected]
2015-09-14powerpc/85xx: Prepare irq handlers for irq argument removalThomas Gleixner2-2/+4
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Jiang Liu <[email protected]> Cc: Scott Wood <[email protected]> Cc: [email protected]
2015-09-14powerpc/mpc5121_ads_cpld: Prepare irq handler for irq argument removalThomas Gleixner1-1/+3
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Julia Lawall <[email protected]> Cc: Jiang Liu <[email protected]> Cc: Anatolij Gustschin <[email protected]> Cc: [email protected]
2015-09-14Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - The values of _SC_NPROCESSORS_CONF and _SC_NPROCESSORS_ONLN (sysconf(3)) were being read from perf.data files in the inverse order they are written, fix it. (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2015-09-14pinctrl: samsung: s3c24xx: fix syntax errorLinus Walleij1-1/+1
?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <[email protected]> Reported-by: Paul Gortmaker <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()Tony Lindgren1-0/+3
If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14pinctrl: join lines that can be a single line within 80 columnsMasahiro Yamada1-2/+1
There is no reason to break a line shorter than 80 columns. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14pinctrl: digicolor: convert null test to IS_ERR testJulia Lawall1-2/+2
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <[email protected]> Acked-by: Baruch Siach <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14pinctrl: qcom: ssbi: convert null test to IS_ERR testJulia Lawall2-4/+4
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: omap: Fix GPIO numbering for deferred probeTony Lindgren1-1/+3
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Santosh Shilimkar <[email protected]> Reviewed-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14Documentation: gpio: Explain that <function>-gpio is also supportedJavier Martinez Canillas1-3/+3
The GPIO documentation mentions that GPIOs are mapped by defining a <function>-gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: omap: Fix gpiochip_add() handling for deferred probeTony Lindgren1-1/+4
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Santosh Shilimkar <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: sx150x: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas1-1/+0
The driver has a I2C device id table that is used to create the module aliases and also "sx150x" isn't a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14Documentation: gpio: board: describe the con_id parameterDirk Behme2-0/+12
The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by: Dirk Behme <[email protected]> Acked-by: Alexandre Courbot <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14Documentation: gpio: board: add flags parameter to gpiod_get*() functionsDirk Behme1-12/+13
With commit 39b2bbe3d715 ("gpio: add flags argument to gpiod_get*() functions") the gpiod_get*() functions got a 'flags' parameter. Reflect this in the documentation, too. Signed-off-by: Dirk Behme <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: Propagate errors from chip->get()Bjorn Andersson1-7/+14
It's possible to have gpio chips hanging off unreliable remote buses where the get() operation will fail to acquire a readout of the current gpio state. Propagate these errors to the consumer so that they can act on, retry or ignore these failing reads, instead of treating them as the line being held high. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Alexandre Courbot <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: rcar: GPIO_RCAR doesn't relate to ARMKuninori Morimoto1-1/+1
8cd1470("gpio: rcar: Add r8a7795 (R-Car H3) support") added GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64. OTOH, GPIO_RCAR driver can be compiled fine on non-ARM. This patch removed ARM dependency for it. Signed-off-by: Kuninori Morimoto <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: mxs: need to check return value of irq_alloc_generic_chipPeng Fan1-2/+11
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxs_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <[email protected]> Cc: Alexandre Courbot <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-09-14gpio: mxc: need to check return value of irq_alloc_generic_chipPeng Fan1-2/+10
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <[email protected]> Cc: Alexandre Courbot <[email protected]> [Manually rebased] Signed-off-by: Linus Walleij <[email protected]>
2015-09-13perf header: Fixup reading of HEADER_NRCPUS featureArnaldo Carvalho de Melo1-2/+2
The original patch introducing this header wrote the number of CPUs available and online in one order and then swapped those values when reading, fix it. Before: # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 # echo 0 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 3 # echo 0 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 2 After the fix, bringing back the CPUs online: # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 2 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu2/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 3 # nrcpus avail : 4 # echo 1 > /sys/devices/system/cpu/cpu1/online # perf record usleep 1 # perf report --header-only | grep 'nrcpus \(online\|avail\)' # nrcpus online : 4 # nrcpus avail : 4 Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Wang Nan <[email protected]> Fixes: fbe96f29ce4b ("perf tools: Make perf.data more self-descriptive (v8)") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2015-09-13time: Fix timekeeping_freqadjust()'s incorrect use of abs() instead of abs64()John Stultz1-1/+1
The internal clocksteering done for fine-grained error correction uses a logarithmic approximation, so any time adjtimex() adjusts the clock steering, timekeeping_freqadjust() quickly approximates the correct clock frequency over a series of ticks. Unfortunately, the logic in timekeeping_freqadjust(), introduced in commit: dc491596f639 ("timekeeping: Rework frequency adjustments to work better w/ nohz") used the abs() function with a s64 error value to calculate the size of the approximated adjustment to be made. Per include/linux/kernel.h: "abs() should not be used for 64-bit types (s64, u64, long long) - use abs64()". Thus on 32-bit platforms, this resulted in the clocksteering to take a quite dampended random walk trying to converge on the proper frequency, which caused the adjustments to be made much slower then intended (most easily observed when large adjustments are made). This patch fixes the issue by using abs64() instead. Reported-by: Nuno Gonçalves <[email protected]> Tested-by: Nuno Goncalves <[email protected]> Signed-off-by: John Stultz <[email protected]> Cc: <[email protected]> # v3.17+ Cc: Linus Torvalds <[email protected]> Cc: Miroslav Lichvar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Prarit Bhargava <[email protected]> Cc: Richard Cochran <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-13perf/x86/intel: Fix constraint accessPeter Zijlstra1-1/+4
Sasha reported that we can get here with .idx==-1, and cpuc->event_constraints unallocated. Suggested-by: Stephane Eranian <[email protected]> Reported-by: Sasha Levin <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: <[email protected]> Fixes: b371b5943178 ("perf/x86: Fix event/group validation") Signed-off-by: Ingo Molnar <[email protected]>
2015-09-13x86/cpu: Print family/model/stepping in hexBorislav Petkov1-2/+2
924e101a7ab6 ("x86/debug: Dump family, model, stepping of the boot CPU") had its good intentions to dump the exact F/M/S as an aid during debugging sessions but its output can be ambiguous. Fix that: -smpboot: CPU0: Intel Core Processor (Broadwell) (fam: 06, model: 47, stepping: 02) +smpboot: CPU0: Intel Core Processor (Broadwell) (family: 0x6, model: 0x47, stepping: 0x2) Also, spell out "family". Signed-off-by: Borislav Petkov <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2015-09-12hwmon: (nct6775) Add support for NCT6793DGuenter Roeck3-18/+38
NCT6793D is register compatible with NCT6792D. Also move nct6775_sio_names[] closer to enum kinds to simplify adding new chips. Tested-by: Grazvydas Ignotas <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2015-09-12hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chipsGuenter Roeck1-6/+10
The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by: Grazvydas Ignotas <[email protected]> Reviewed-by: Jean Delvare <[email protected]> Cc: [email protected] # v3.10+ Signed-off-by: Guenter Roeck <[email protected]>
2015-09-12Linux 4.3-rc1Linus Torvalds1-2/+2
2015-09-12Merge tag 'cris-for-4.3' of ↵Linus Torvalds50-421/+220
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
2015-09-12blk: rq_data_dir() should not return a booleanLinus Torvalds1-1/+1
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316dbf90 ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by: Linus Torvalds <[email protected]>
2015-09-12Merge branch 'writeback-plugging'Linus Torvalds1-3/+10
Fix up the writeback plugging introduced in commit d353d7587d02 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
2015-09-12writeback: plug writeback in wb_writeback() and writeback_inodes_wb()Linus Torvalds1-0/+6
We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <[email protected]> Cc: Josef Bacik <[email protected]> Cc: Dave Chinner <[email protected]> Cc: Neil Brown <[email protected]> Cc: Jan Kara <[email protected]> Cc: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2015-09-12Merge branch 'for-mingo' of ↵Ingo Molnar1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fix from Paul E. McKenney, fixing an inverted RCU_LOCKDEP_WARN() condition. Signed-off-by: Ingo Molnar <[email protected]>
2015-09-11thermal: fix intel PCH thermal driver mismergeLinus Torvalds1-7/+4
I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07f882: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a7739 ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625d2ff ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by: Linus Torvalds <[email protected]>
2015-09-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds22-54/+336
Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <[email protected]>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
2015-09-11ARCv2: [axs103_smp] Reduce clk for SMP FPGA configsVineet Gupta1-0/+2
Newer bitfiles needs the reduced clk even for SMP builds Cc: <[email protected]> #4.2 Signed-off-by: Vineet Gupta <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2015-09-11Merge tag 'ntb-4.3' of git://github.com/jonmason/ntbLinus Torvalds7-47/+210
Pull NTB fixes from Jon Mason: "NTB bug and documentation fixes, new device IDs, performance improvements, and adding a mailing list to MAINTAINERS for NTB" * tag 'ntb-4.3' of git://github.com/jonmason/ntb: NTB: Fix range check on memory window index NTB: Improve index handling in B2B MW workaround NTB: Fix documentation for ntb_peer_db_clear. NTB: Fix documentation for ntb_link_is_up NTB: Use unique DMA channels for TX and RX NTB: Remove dma_sync_wait from ntb_async_rx NTB: Clean up QP stats info NTB: Make the transport list in order of discovery NTB: Add PCI Device IDs for Broadwell Xeon NTB: Add flow control to the ntb_netdev NTB: Add list to MAINTAINERS
2015-09-11Merge branch 'for-linus' of ↵Linus Torvalds17-15/+1019
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "Second round of updates for the input subsystem. This introduces two brand new touchscreen drivers (Colibri and imx6ul_tsc), some small driver fixes, and we are no longer report errors from evdev_flush() as users do not really have a way of handling errors, error codes that we were returning were not on the list of errors supposed to be returned by close(), and errors were causing issues with one of older versions of systemd" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: imx_keypad - remove obsolete comment Input: touchscreen - add imx6ul_tsc driver support Input: Add touchscreen support for Colibri VF50 Input: i8042 - lower log level for "no controller" message Input: evdev - do not report errors form flush() Input: elants_i2c - extend the calibration timeout to 12 seconds Input: sparcspkr - fix module autoload for OF platform drivers Input: regulator-haptic - fix module autoload for OF platform driver Input: pwm-beeper - fix module autoload for OF platform driver Input: ab8500-ponkey - Fix module autoload for OF platform driver Input: cyttsp - remove unnecessary MODULE_ALIAS() Input: elan_i2c - add ACPI ID "ELAN1000"
2015-09-11Merge tag 'pm+acpi-4.3-rc1-2' of ↵Linus Torvalds13-44/+187
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previous PM+ACPI pull request (cpufreq core and drivers, cpuidle, generic power domains framework). Some of them didn't make to that pull request and some fix issues introduced by it. The only really new thing is the support for suspend frequency in the cpufreq-dt driver, but it is needed to fix an issue with Exynos platforms. Specifics: - build fix for the new Mediatek MT8173 cpufreq driver (Guenter Roeck). - generic power domains framework fixes (power on error code path, subdomain removal) and cleanup of a deprecated API user (Geert Uytterhoeven, Jon Hunter, Ulf Hansson). - cpufreq-dt driver fixes including two fixes for bugs related to the new Operating Performance Points Device Tree bindings introduced recently (Viresh Kumar). - suspend frequency support for the cpufreq-dt driver (Bartlomiej Zolnierkiewicz, Viresh Kumar). - cpufreq core cleanups (Viresh Kumar). - intel_pstate driver fixes (Chen Yu, Kristen Carlson Accardi). - additional sanity check in the cpuidle core (Xunlei Pang). - fix for a comment related to CPU power management (Lina Iyer)" * tag 'pm+acpi-4.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: fix PCT_TO_HWP macro intel_pstate: Fix user input of min/max to legal policy region PM / OPP: Return suspend_opp only if it is enabled cpufreq-dt: add suspend frequency support cpufreq: allow cpufreq_generic_suspend() to work without suspend frequency PM / OPP: add dev_pm_opp_get_suspend_opp() helper staging: board: Migrate away from __pm_genpd_name_add_device() cpufreq: Use __func__ to print function's name cpufreq: staticize cpufreq_cpu_get_raw() PM / Domains: Ensure subdomain is not in use before removing cpufreq: Add ARM_MT8173_CPUFREQ dependency on THERMAL cpuidle/coupled: Add sanity check for safe_state_index PM / Domains: Try power off masters in error path of __pm_genpd_poweron() cpufreq: dt: Tolerance applies on both sides of target voltage cpufreq: dt: Print error on failing to mark OPPs as shared cpufreq: dt: Check OPP count before marking them shared kernel/cpu_pm: fix cpu_cluster_pm_exit comment
2015-09-11Merge branch 'for-next' of ↵Linus Torvalds38-633/+675
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the outstanding target-pending updates for v4.3-rc1. Mostly bug-fixes and minor changes this round. The fallout from the big v4.2-rc1 RCU conversion have (thus far) been minimal. The highlights this round include: - Move sense handling routines into scsi_common code (Sagi) - Return ABORTED_COMMAND sense key for PI errors (Sagi) - Add tpg_enabled_sendtargets attribute for disabled iscsi-target discovery (David) - Shrink target struct se_cmd by rearranging fields (Roland) - Drop iSCSI use of mutex around max_cmd_sn increment (Roland) - Replace iSCSI __kernel_sockaddr_storage with sockaddr_storage (Andy + Chris) - Honor fabric max_data_sg_nents I/O transfer limit (Arun + Himanshu + nab) - Fix EXTENDED_COPY >= v4.1 regression OOPsen (Alex + nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (37 commits) target: use stringify.h instead of own definition target/user: Fix UFLAG_UNKNOWN_OP handling target: Remove no-op conditional target/user: Remove unused variable target: Fix max_cmd_sn increment w/o cmdsn mutex regressions target: Attach EXTENDED_COPY local I/O descriptors to xcopy_pt_sess target/qla2xxx: Honor max_data_sg_nents I/O transfer limit target/iscsi: Replace __kernel_sockaddr_storage with sockaddr_storage target/iscsi: Replace conn->login_ip with login_sockaddr target/iscsi: Keep local_ip as the actual sockaddr target/iscsi: Fix np_ip bracket issue by removing np_ip target: Drop iSCSI use of mutex around max_cmd_sn increment qla2xxx: Update tcm_qla2xxx module description to 24xx+ iscsi-target: Add tpg_enabled_sendtargets for disabled discovery drivers: target: Drop unlikely before IS_ERR(_OR_NULL) target: check DPO/FUA usage for COMPARE AND WRITE target: Shrink struct se_cmd by rearranging fields target: Remove cmd->se_ordered_id (unused except debug log lines) target: add support for START_STOP_UNIT SCSI opcode target: improve unsupported opcode message ...
2015-09-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds39-1271/+1860
Pull second round of SCSI updates from James Bottomley: "There's one late arriving patch here (added today), fixing a build issue which the scsi_dh patch set in here uncovered. Other than that, everything has been incubated in -next and the checkers for a week. The major pieces of this patch are a set patches facilitating better integration between scsi and scsi_dh (the device handling layer used by multi-path; all the dm parts are acked by Mike Snitzer). This also includes driver updates for mp3sas, scsi_debug and an assortment of bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (50 commits) scsi_dh: fix randconfig build error scsi: fix scsi_error_handler vs. scsi_host_dev_release race fcoe: Convert use of __constant_htons to htons mpt2sas: setpci reset kernel oops fix pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY lpfc: Fix possible use-after-free and double free in lpfc_mbx_cmpl_rdp_page_a2() bfa: Fix incorrect de-reference of pointer bfa: Fix indentation scsi_transport_sas: Remove check for SAS expander when querying bay/enclosure IDs. scsi_debug: resp_request: remove unused variable scsi_debug: fix REPORT LUNS Well Known LU scsi_debug: schedule_resp fix input variable check scsi_debug: make dump_sector static scsi_debug: vfree is null safe so drop the check scsi_debug: use SCSI_W_LUN_REPORT_LUNS instead of SAM2_WLUN_REPORT_LUNS; scsi_debug: define pr_fmt() for consistent logging mpt2sas: Refcount fw_events and fix unsafe list usage mpt2sas: Refcount sas_device objects and fix unsafe list usage scsi_dh: return SCSI_DH_NOTCONN in scsi_dh_activate() scsi_dh: don't allow to detach device handlers at runtime ...
2015-09-11[CIFS] mount option sec=none not displayed properly in /proc/mountsSteve French1-1/+4
When the user specifies "sec=none" in a cifs mount, we set sec_type as unspecified (and set a flag and the username will be null) rather than setting sectype as "none" so cifs_show_security was not properly displaying it in cifs /proc/mounts entries. Signed-off-by: Steve French <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2015-09-11Merge tag 'media/v4.3-2' of ↵Linus Torvalds16-608/+477
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "A series of patches that move part of the code used to allocate memory from the media subsystem to the mm subsystem" [ The mm parts have been acked by VM people, and the series was apparently in -mm for a while - Linus ] * tag 'media/v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] drm/exynos: Convert g2d_userptr_get_dma_addr() to use get_vaddr_frames() [media] media: vb2: Remove unused functions [media] media: vb2: Convert vb2_dc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_vmalloc_get_userptr() to use frame vector [media] media: vb2: Convert vb2_dma_sg_get_userptr() to use frame vector [media] vb2: Provide helpers for mapping virtual addresses [media] media: omap_vout: Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns() [media] mm: Provide new get_vaddr_frames() helper [media] vb2: Push mmap_sem down to memops
Powered by cgit, Gruvboxed by Blaster4385.