aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25platform/x86: hp-wmi: Disable tablet-mode reporting by defaultHans de Goede1-4/+10
Recently userspace has started making more use of SW_TABLET_MODE (when an input-dev reports this). Specifically recent GNOME3 versions will: 1. When SW_TABLET_MODE is reported and is reporting 0: 1.1 Disable accelerometer-based screen auto-rotation 1.2 Disable automatically showing the on-screen keyboard when a text-input field is focussed 2. When SW_TABLET_MODE is reported and is reporting 1: 2.1 Ignore input-events from the builtin keyboard and touchpad (this is for 360° hinges style 2-in-1s where the keyboard and touchpads are accessible on the back of the tablet when folded into tablet-mode) This means that claiming to support SW_TABLET_MODE when it does not actually work / reports correct values has bad side-effects. The check in the hp-wmi code which is used to decide if the input-dev should claim SW_TABLET_MODE support, only checks if the HPWMI_HARDWARE_QUERY is supported. It does *not* check if the hardware actually is capable of reporting SW_TABLET_MODE. This leads to the hp-wmi input-dev claiming SW_TABLET_MODE support, while in reality it will always report 0 as SW_TABLET_MODE value. This has been seen on a "HP ENVY x360 Convertible 15-cp0xxx" and this likely is the case on a whole lot of other HP models. This problem causes both auto-rotation and on-screen keyboard support to not work on affected x360 models. There is no easy fix for this, but since userspace expects SW_TABLET_MODE reporting to be reliable when advertised it is better to not claim/report SW_TABLET_MODE support at all, then to claim to support it while it does not work. To avoid the mentioned problems, add a new enable_tablet_mode_sw module-parameter which defaults to false. Note I've made this an int using the standard -1=auto, 0=off, 1=on triplett, with the hope that in the future we can come up with a better way to detect SW_TABLET_MODE support. ATM the default auto option just does the same as off. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1918255 Cc: Stefan Brüns <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Acked-by: Mark Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-25SUNRPC: Handle 0 length opaque XDR object data properlyDave Wysochanski1-3/+6
When handling an auth_gss downcall, it's possible to get 0-length opaque object for the acceptor. In the case of a 0-length XDR object, make sure simple_get_netobj() fills in dest->data = NULL, and does not continue to kmemdup() which will set dest->data = ZERO_SIZE_PTR for the acceptor. The trace event code can handle NULL but not ZERO_SIZE_PTR for a string, and so without this patch the rpcgss_context trace event will crash the kernel as follows: [ 162.887992] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 162.898693] #PF: supervisor read access in kernel mode [ 162.900830] #PF: error_code(0x0000) - not-present page [ 162.902940] PGD 0 P4D 0 [ 162.904027] Oops: 0000 [#1] SMP PTI [ 162.905493] CPU: 4 PID: 4321 Comm: rpc.gssd Kdump: loaded Not tainted 5.10.0 #133 [ 162.908548] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 162.910978] RIP: 0010:strlen+0x0/0x20 [ 162.912505] Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31 [ 162.920101] RSP: 0018:ffffaec900c77d90 EFLAGS: 00010202 [ 162.922263] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffde697 [ 162.925158] RDX: 000000000000002f RSI: 0000000000000080 RDI: 0000000000000010 [ 162.928073] RBP: 0000000000000010 R08: 0000000000000e10 R09: 0000000000000000 [ 162.930976] R10: ffff8e698a590cb8 R11: 0000000000000001 R12: 0000000000000e10 [ 162.933883] R13: 00000000fffde697 R14: 000000010034d517 R15: 0000000000070028 [ 162.936777] FS: 00007f1e1eb93700(0000) GS:ffff8e6ab7d00000(0000) knlGS:0000000000000000 [ 162.940067] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 162.942417] CR2: 0000000000000010 CR3: 0000000104eba000 CR4: 00000000000406e0 [ 162.945300] Call Trace: [ 162.946428] trace_event_raw_event_rpcgss_context+0x84/0x140 [auth_rpcgss] [ 162.949308] ? __kmalloc_track_caller+0x35/0x5a0 [ 162.951224] ? gss_pipe_downcall+0x3a3/0x6a0 [auth_rpcgss] [ 162.953484] gss_pipe_downcall+0x585/0x6a0 [auth_rpcgss] [ 162.955953] rpc_pipe_write+0x58/0x70 [sunrpc] [ 162.957849] vfs_write+0xcb/0x2c0 [ 162.959264] ksys_write+0x68/0xe0 [ 162.960706] do_syscall_64+0x33/0x40 [ 162.962238] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 162.964346] RIP: 0033:0x7f1e1f1e57df Signed-off-by: Dave Wysochanski <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2021-01-25SUNRPC: Move simple_get_bytes and simple_get_netobj into private headerDave Wysochanski4-60/+46
Remove duplicated helper functions to parse opaque XDR objects and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h. In the new file carry the license and copyright from the source file net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside include/linux/sunrpc/xdr.h since lockd is not the only user of struct xdr_netobj. Signed-off-by: Dave Wysochanski <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2021-01-25fs/pipe: allow sendfile() to pipe againJohannes Berg1-0/+1
After commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") sendfile() could no longer send data from a real file to a pipe, breaking for example certain cgit setups (e.g. when running behind fcgiwrap), because in this case cgit will try to do exactly this: sendfile() to a pipe. Fix this by using iter_file_splice_write for the splice_write method of pipes, as suggested by Christoph. Cc: [email protected] Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Suggested-by: Christoph Hellwig <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Tested-by: Johannes Berg <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-25Commit 9bb48c82aced ("tty: implement write_iter") converted the ttySami Tolvanen3-7/+3
layer to use write_iter. Fix the redirected_tty_write declaration also in n_tty and change the comparisons to use write_iter instead of write. [ Also moved the declaration of redirected_tty_write() to the proper location in a header file. The reason for the bug was the bogus extern declaration in n_tty.c silently not matching the changed definition in tty_io.c, and because it wasn't in a shared header file, there was no cross-checking of the declaration. Sami noticed because Clang's Control Flow Integrity checking ended up incidentally noticing the inconsistent declaration. - Linus ] Fixes: 9bb48c82aced ("tty: implement write_iter") Signed-off-by: Sami Tolvanen <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-25dt-bindings:iio:adc: update adc.yaml referenceMauro Carvalho Chehab1-1/+1
Changeset b70d154d6558 ("dt-bindings:iio:adc: convert adc.txt to yaml") renamed: Documentation/devicetree/bindings/iio/adc/adc.txt to: Documentation/devicetree/bindings/iio/adc/adc.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Link: https://lore.kernel.org/r/8e37dba8ae9099acd649bab8a1cf718caa4f3e6a.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <[email protected]>
2021-01-25dt-bindings: memory: mediatek: update mediatek,smi-larb.yaml referencesMauro Carvalho Chehab4-4/+4
Changeset 27bb0e42855a ("dt-bindings: memory: mediatek: Convert SMI to DT schema") renamed: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt to: Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml. Update its cross-references accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/c70bd79b311a65babe7374eaf81974563400a943.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <[email protected]>
2021-01-25dt-bindings: display: mediatek: update mediatek,dpi.yaml referenceMauro Carvalho Chehab1-1/+1
Changeset 9273cf7d3942 ("dt-bindings: display: mediatek: convert the dpi bindings to yaml") renamed: Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt to: Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/3bf906f39b797d18800abd387187cce71296e5eb.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <[email protected]>
2021-01-25ASoC: audio-graph-card: update audio-graph-card.yaml referenceMauro Carvalho Chehab1-1/+1
Changeset 97198614f6c3 ("ASoC: audio-graph-card: switch to yaml base Documentation") renamed: Documentation/devicetree/bindings/sound/audio-graph-card.txt to: Documentation/devicetree/bindings/sound/audio-graph-card.yaml. Update its cross-reference accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/8a779e6b9644d19c5d77b382059f6ccf9781434d.1610535350.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <[email protected]>
2021-01-25Merge tag 'printk-for-5.11-urgent-fixup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: "The fix of a potential buffer overflow in 5.11-rc5 introduced another one. The trailing '\0' might be written up to the message "len" past the buffer. Fortunately, it is not that easy to hit. Most readers use 1kB buffers for a single message. Typical messages fit into the temporary buffer with enough reserve. Also readers do not rely on the '\0'. It is related to the previous fix. Some readers required the space for the trailing '\0'. We decided to write it there to avoid such regressions in the future. The most realistic victims are dumpers using kmsg_dump_get_buffer(). They are filling the entire buffer with as many messages as possible. They are typically used when handling panic()" * tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix string termination for record_print_text()
2021-01-25nbd: freeze the queue while we're adding connectionsJosef Bacik1-0/+8
When setting up a device, we can krealloc the config->socks array to add new sockets to the configuration. However if we happen to get a IO request in at this point even though we aren't setup we could hit a UAF, as we deref config->socks without any locking, assuming that the configuration was setup already and that ->socks is safe to access it as we have a reference on the configuration. But there's nothing really preventing IO from occurring at this point of the device setup, we don't want to incur the overhead of a lock to access ->socks when it will never change while the device is running. To fix this UAF scenario simply freeze the queue if we are adding sockets. This will protect us from this particular case without adding any additional overhead for the normal running case. Cc: [email protected] Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-25PM: hibernate: flush swap writer after markingLaurent Badel1-1/+1
Flush the swap writer after, not before, marking the files, to ensure the signature is properly written. Fixes: 6f612af57821 ("PM / Hibernate: Group swap ops") Signed-off-by: Laurent Badel <[email protected]> Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-25btrfs: fix log replay failure due to race with space cache rebuildFilipe Manana1-43/+18
After a sudden power failure we may end up with a space cache on disk that is not valid and needs to be rebuilt from scratch. If that happens, during log replay when we attempt to pin an extent buffer from a log tree, at btrfs_pin_extent_for_log_replay(), we do not wait for the space cache to be rebuilt through the call to: btrfs_cache_block_group(cache, 1); That is because that only waits for the task (work queue job) that loads the space cache to change the cache state from BTRFS_CACHE_FAST to any other value. That is ok when the space cache on disk exists and is valid, but when the cache is not valid and needs to be rebuilt, it ends up returning as soon as the cache state changes to BTRFS_CACHE_STARTED (done at caching_thread()). So this means that we can end up trying to unpin a range which is not yet marked as free in the block group. This results in the call to btrfs_remove_free_space() to return -EINVAL to btrfs_pin_extent_for_log_replay(), which in turn makes the log replay fail as well as mounting the filesystem. More specifically the -EINVAL comes from free_space_cache.c:remove_from_bitmap(), because the requested range is not marked as free space (ones in the bitmap), we have the following condition triggered: static noinline int remove_from_bitmap(struct btrfs_free_space_ctl *ctl, (...) if (ret < 0 || search_start != *offset) return -EINVAL; (...) It's the "search_start != *offset" that results in the condition being evaluated to true. When this happens we got the following in dmesg/syslog: [72383.415114] BTRFS: device fsid 32b95b69-0ea9-496a-9f02-3f5a56dc9322 devid 1 transid 1432 /dev/sdb scanned by mount (3816007) [72383.417837] BTRFS info (device sdb): disk space caching is enabled [72383.418536] BTRFS info (device sdb): has skinny extents [72383.423846] BTRFS info (device sdb): start tree-log replay [72383.426416] BTRFS warning (device sdb): block group 30408704 has wrong amount of free space [72383.427686] BTRFS warning (device sdb): failed to load free space cache for block group 30408704, rebuilding it now [72383.454291] BTRFS: error (device sdb) in btrfs_recover_log_trees:6203: errno=-22 unknown (Failed to pin buffers while recovering log root tree.) [72383.456725] BTRFS: error (device sdb) in btrfs_replay_log:2253: errno=-22 unknown (Failed to recover log tree) [72383.460241] BTRFS error (device sdb): open_ctree failed We also mark the range for the extent buffer in the excluded extents io tree. That is fine when the space cache is valid on disk and we can load it, in which case it causes no problems. However, for the case where we need to rebuild the space cache, because it is either invalid or it is missing, having the extent buffer range marked in the excluded extents io tree leads to a -EINVAL failure from the call to btrfs_remove_free_space(), resulting in the log replay and mount to fail. This is because by having the range marked in the excluded extents io tree, the caching thread ends up never adding the range of the extent buffer as free space in the block group since the calls to add_new_free_space(), called from load_extent_tree_free(), filter out any ranges that are marked as excluded extents. So fix this by making sure that during log replay we wait for the caching task to finish completely when we need to rebuild a space cache, and also drop the need to mark the extent buffer range in the excluded extents io tree, as well as clearing ranges from that tree at btrfs_finish_extent_commit(). This started to happen with some frequency on large filesystems having block groups with a lot of fragmentation since the recent commit e747853cae3ae3 ("btrfs: load free space cache asynchronously"), but in fact the issue has been there for years, it was just much less likely to happen. Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-25btrfs: fix lockdep warning due to seqcount_mutex on 32bit archSu Yue2-6/+7
This effectively reverts commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t"). While running fstests on 32 bits test box, many tests failed because of warnings in dmesg. One of those warnings (btrfs/003): [66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5 [66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014 [66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs] [66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803 [66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70 [66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246 [66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0 [66.441485] Call Trace: [66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs] [66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs] [66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs] [66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441619] ? __this_cpu_preempt_check+0xf/0x11 [66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs] [66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs] [66.441700] ? __lock_acquire+0x35f/0x2650 [66.441717] ? lockdep_hardirqs_on+0x87/0x120 [66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0 [66.441724] ? call_rcu+0x2d3/0x530 [66.441731] ? __might_fault+0x41/0x90 [66.441736] ? kvm_sched_clock_read+0x15/0x50 [66.441740] ? sched_clock+0x8/0x10 [66.441745] ? sched_clock_cpu+0x13/0x180 [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [66.441768] __ia32_sys_ioctl+0x165/0x8a0 [66.441773] ? __this_cpu_preempt_check+0xf/0x11 [66.441785] ? __might_fault+0x89/0x90 [66.441791] __do_fast_syscall_32+0x54/0x80 [66.441796] do_fast_syscall_32+0x32/0x70 [66.441801] do_SYSENTER_32+0x15/0x20 [66.441805] entry_SYSENTER_32+0x9f/0xf2 [66.441808] EIP: 0xab7b5549 [66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c [66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98 [66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292 [66.441833] irq event stamp: 42579 [66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590 [66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590 [66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60 [66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60 ======================================================================== btrfs_remove_chunk+0x58b/0x7b0: __seqprop_mutex_assert at linux/./include/linux/seqlock.h:279 (inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212 (inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994 ======================================================================== The warning is produced by lockdep_assert_held() in __seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled. And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock fs_info->chunk_mutex held already. After adding some debug prints, the cause was found that many __alloc_device() are called with NULL @fs_info (during scanning ioctl). Inside the function, btrfs_device_data_ordered_init() is expanded to seqcount_mutex_init(). In this scenario, its second parameter info->chunk_mutex is &NULL->chunk_mutex which equals to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus, seqcount_mutex_init() is called in wrong way. And later btrfs_device_get/set helpers trigger lockdep warnings. The device and filesystem object lifetimes are different and we'd have to synchronize initialization of the btrfs_device::data_seqcount with the fs_info, possibly using some additional synchronization. It would still not prevent concurrent access to the seqcount lock when it's used for read and initialization. Commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") does not mention a particular problem being fixed so revert should not cause any harm and we'll get the lockdep warning fixed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139 Reported-by: Erhard F <[email protected]> Fixes: d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t") CC: [email protected] # 5.10 CC: Davidlohr Bueso <[email protected]> Signed-off-by: Su Yue <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-25btrfs: fix possible free space tree corruption with online conversionJosef Bacik3-2/+21
While running btrfs/011 in a loop I would often ASSERT() while trying to add a new free space entry that already existed, or get an EEXIST while adding a new block to the extent tree, which is another indication of double allocation. This occurs because when we do the free space tree population, we create the new root and then populate the tree and commit the transaction. The problem is when you create a new root, the root node and commit root node are the same. During this initial transaction commit we will run all of the delayed refs that were paused during the free space tree generation, and thus begin to cache block groups. While caching block groups the caching thread will be reading from the main root for the free space tree, so as we make allocations we'll be changing the free space tree, which can cause us to add the same range twice which results in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a variety of different errors when running delayed refs because of a double allocation. Fix this by marking the fs_info as unsafe to load the free space tree, and fall back on the old slow method. We could be smarter than this, for example caching the block group while we're populating the free space tree, but since this is a serious problem I've opted for the simplest solution. CC: [email protected] # 4.9+ Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree") Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2021-01-25kernel: kexec: remove the lock operation of system_transition_mutexBaoquan He1-2/+0
Function kernel_kexec() is called with lock system_transition_mutex held in reboot system call. While inside kernel_kexec(), it will acquire system_transition_mutex agin. This will lead to dead lock. The dead lock should be easily triggered, it hasn't caused any failure report just because the feature 'kexec jump' is almost not used by anyone as far as I know. An inquiry can be made about who is using 'kexec jump' and where it's used. Before that, let's simply remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope. Fixes: 55f2503c3b69 ("PM / reboot: Eliminate race between reboot and suspend") Signed-off-by: Baoquan He <[email protected]> Reported-by: Dan Carpenter <[email protected]> Reviewed-by: Pingfan Liu <[email protected]> Cc: 4.19+ <[email protected]> # 4.19+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-25s390/dasd: Fix inconsistent kobject removalJan Höppner3-8/+17
Our intention was to only remove path kobjects whenever a device is being set offline. However, one corner case was missing. If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and BIODASDENABLE respectively), the enabling process will call dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in order to update path information. During that update, dasd_eckd_clear_conf_data() clears all old data and also removes all kobjects. This will leave us with an inconsistent state of path kobjects and a subsequent path verification leads to a failing kobject creation. Fix this by removing kobjects only in the context of offlining a device as initially intended. Fixes: 19508b204740 ("s390/dasd: Display FC Endpoint Security information via sysfs") Reported-by: Stefan Haberland <[email protected]> Signed-off-by: Jan Höppner <[email protected]> Reviewed-by: Stefan Haberland <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-25ACPI: thermal: Do not call acpi_thermal_check() directlyRafael J. Wysocki1-13/+33
Calling acpi_thermal_check() from acpi_thermal_notify() directly is problematic if _TMP triggers Notify () on the thermal zone for which it has been evaluated (which happens on some systems), because it causes a new acpi_thermal_notify() invocation to be queued up every time and if that takes place too often, an indefinite number of pending work items may accumulate in kacpi_notify_wq over time. Besides, it is not really useful to queue up a new invocation of acpi_thermal_check() if one of them is pending already. For these reasons, rework acpi_thermal_notify() to queue up a thermal check instead of calling acpi_thermal_check() directly and only allow one thermal check to be pending at a time. Moreover, only allow one acpi_thermal_check_fn() instance at a time to run thermal_zone_device_update() for one thermal zone and make it return early if it sees other instances running for the same thermal zone. While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(), as it is only called from there after the other changes made here. [This issue appears to have been exposed by commit 6d25be5782e4 ("sched/core, workqueues: Distangle worker accounting from rq lock"), but it is unclear why it was not visible earlier.] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877 Reported-by: Stephen Berman <[email protected]> Diagnosed-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Tested-by: Stephen Berman <[email protected]> Cc: All applicable <[email protected]>
2021-01-25ACPI: sysfs: Prefer "compatible" modaliasKai-Heng Feng1-14/+6
Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") may create two "MODALIAS=" in one uevent file if specific conditions are met. This breaks systemd-udevd, which assumes each "key" in one uevent file to be unique. The internal implementation of systemd-udevd overwrites the first MODALIAS with the second one, so its kmod rule doesn't load the driver for the first MODALIAS. So if both the ACPI modalias and the OF modalias are present, use the latter to ensure that there will be only one MODALIAS. Link: https://github.com/systemd/systemd/pull/18163 Suggested-by: Mika Westerberg <[email protected]> Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present") Signed-off-by: Kai-Heng Feng <[email protected]> Reviewed-by: Mika Westerberg <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Cc: 4.1+ <[email protected]> # 4.1+ [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-25KVM: arm64: Don't clobber x4 in __do_hyp_initAndrew Scull1-9/+11
arm_smccc_1_1_hvc() only adds write contraints for x0-3 in the inline assembly for the HVC instruction so make sure those are the only registers that change when __do_hyp_init is called. Tested-by: David Brazdil <[email protected]> Signed-off-by: Andrew Scull <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-25Merge series "ASoC: SOF: partial fix to Kconfig issues" from Pierre-Louis ↵Mark Brown3-10/+14
Bossart <[email protected]>: We've had several reports of broken dependencies. The 'right' fix is to revisit the module dependencies as suggested by Arnd Bergmann. This is WIP at https://github.com/thesofproject/linux/pull/2683. Since this is taking longer than expected, I am only sharing quick fixes for now. Pierre-Louis Bossart (2): ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies ASoC: SOF: SND_INTEL_DSP_CONFIG dependency sound/soc/sof/intel/Kconfig | 3 ++- sound/soc/sof/sof-acpi-dev.c | 11 ++++++----- sound/soc/sof/sof-pci-dev.c | 10 ++++++---- 3 files changed, 14 insertions(+), 10 deletions(-) -- 2.25.1
2021-01-25mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi1-1/+1
The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
2021-01-25iwlwifi: queue: bail out on invalid freeingJohannes Berg1-4/+2
If we find an entry without an SKB, we currently continue, but that will just result in an infinite loop since we won't increment the read pointer, and will try the same thing over and over again. Fix this. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
2021-01-25iwlwifi: mvm: guard against device removal in reprobeJohannes Berg1-1/+2
If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
2021-01-25iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.Matti Gottlieb1-2/+2
The bit that indicates if the device supports 160MHZ is bit #9. The macro checks bit #8. Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. Signed-off-by: Matti Gottlieb <[email protected]> Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
2021-01-25iwlwifi: mvm: clear IN_D3 after wowlan status cmdShaul Triebitz1-3/+3
In D3 resume flow, avoid the following race where sending packets before updating the sequence number (sequence number received from the wowlan status command response): Thread 1: __iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut by thread 2 before reaching iwl_mvm_query_wakeup_reasons. Thread 2: iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number. Thread 1: __iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons updating the sequence number received from the firmware. The next packet that will be sent now will cause sysassert 0x1096. Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after sending the wowlan status command and updating the sequence number. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
2021-01-25iwlwifi: pcie: add rules to match Qu with Hr2Luca Coelho3-0/+38
Until now we have been relying on matching the PCI ID and subsystem device ID in order to recognize Qu devices with Hr2. Add rules to match these devices, so that we don't have to add a new rule for every new ID we get. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
2021-01-25iwlwifi: mvm: invalidate IDs of internal stations at mvm startGregory Greenman2-0/+10
Having sta_id not set for aux_sta and snif_sta can potentially lead to a hard to debug issue in case remove station is called without an add. In this case sta_id 0, an unrelated regular station, will be removed. In fact, we do have a FW assert that occures rarely and from the debug data analysis it looks like sta_id 0 is removed by mistake, though it's hard to pinpoint the exact flow. The WARN_ON in this patch should help to find it. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
2021-01-25iwlwifi: mvm: fix the return type for DSM functions 1 and 2Matt Chen3-29/+68
The return type value of functions 1 and 2 were considered to be an integer inside a buffer, but they can also be only an integer, without the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a single integer value, as well as packed inside a buffer. Signed-off-by: Matt Chen <[email protected]> Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
2021-01-25USB: serial: cp210x: add pid/vid for WSDA-200-USBPho Tran1-0/+1
Information pid/vid of WSDA-200-USB, Lord corporation company: vid: 199b pid: ba30 Signed-off-by: Pho Tran <[email protected]> [ johan: amend comment with product name ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-01-25iwlwifi: pcie: reschedule in long-running memory readsJohannes Berg1-1/+7
If we spin for a long time in memory reads that (for some reason in hardware) take a long time, then we'll eventually get messages such as watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272] This is because the reading really does take a very long time, and we don't schedule, so we're hogging the CPU with this task, at least if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y. Previously I misinterpreted the situation and thought that this was only going to happen if we had interrupts disabled, and then fixed this (which is good anyway, however), but that didn't always help; looking at it again now I realized that the spin unlock will only reschedule if CONFIG_PREEMPT is used. In order to avoid this issue, change the code to cond_resched() if we've been spinning for too long here. Signed-off-by: Johannes Berg <[email protected]> Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
2021-01-25iwlwifi: pcie: use jiffies for memory read spin time limitJohannes Berg1-6/+2
There's no reason to use ktime_get() since we don't need any better precision than jiffies, and since we no longer disable interrupts around this code (when grabbing NIC access), jiffies will work fine. Use jiffies instead of ktime_get(). This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule in long-running memory reads". The code gets simpler with the weird clock use etc. removed before we add cond_resched(). Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
2021-01-25iwlwifi: pcie: fix context info memory leakJohannes Berg1-2/+9
If the image loader allocation fails, we leak all the previously allocated memory. Fix this. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
2021-01-25iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmapEmmanuel Grumbach1-0/+5
I hit a NULL pointer exception in this function when the init flow went really bad. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
2021-01-25iwlwifi: pcie: set LTR on more devicesJohannes Berg2-17/+28
To avoid completion timeouts during device boot, set up the LTR timeouts on more devices - similar to what we had before for AX210. This also corrects the AX210 workaround to be done only on discrete (non-integrated) devices, otherwise the registers have no effect. Signed-off-by: Johannes Berg <[email protected]> Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
2021-01-25iwlwifi: queue: don't crash if txq->entries is NULLEmmanuel Grumbach1-25/+24
The code was really awkward, we would first dereference txq->entries when calling iwl_txq_genX_tfd_unmap and then we would check that txq->entries is non-NULL. Fix that by exiting if txq->entries is NULL. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
2021-01-25iwlwifi: fix the NMI flow for old devicesEmmanuel Grumbach2-6/+13
I noticed that the flow that triggers an NMI on the firmware for old devices (tested on 7265) doesn't work. Apparently, the firmware / device is still in low power when we write the register that triggers the NMI. We call the "grab_nic_access" function to make sure the device is awake but that wasn't enough. I played with this and noticed that if we wait 1 ms after the device reports it is awake before we write to the NMI register, the device always sees our write and the firmware gets properly asserted. Triggering an NMI to the firmware can be done with the debugfs hook: echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi What happened before is that the firmware would just stall without running its NMI routine. Because of that the driver wouldn't get the "firmware crashed" interrupt. After a while the driver would notice that the firmware is not responding to some command and it would read the error data from the firmware, but this data is populated in the NMI service routine in the firmware which was not called. So in the logs it looked like: iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms. iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00000000 | branchlink2 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000000 | data2 iwlwifi 0000:00:03.0: 0x00000000 | data3 iwlwifi 0000:00:03.0: 0x00000000 | beacon time iwlwifi 0000:00:03.0: 0x00000000 | tsf low ... With this fix, immediately after we trigger the NMI to the firmware, we get the expected: iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000. iwlwifi 0000:00:03.0: Start IWL Error Log Dump: iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2 iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1 iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000080 | data2 iwlwifi 0000:00:03.0: 0x07030000 | data3 iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low iwlwifi 0000:00:03.0: 0x00000000 | tsf hi iwlwifi 0000:00:03.0: 0x00000000 | time gp1 iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2 iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type iwlwifi 0000:00:03.0: 0x0000001D | uCode version major Notice the first line: "Microcode SW error detected:" which is printed in the driver's ISR, which means that the driver actually got an interrupt from the firmware saying that it crashed. And then we have the properly populated error data. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
2021-01-25iwlwifi: pnvm: don't try to load after failuresJohannes Berg1-1/+7
If loading the PNVM file failed on the first try during the interface up, the file is unlikely to show up later, and we already don't try to reload it if it changes, so just don't try loading it again and again. This also fixes some issues where we may try to load it at resume time, which may not be possible yet. Signed-off-by: Johannes Berg <[email protected]> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
2021-01-25iwlwifi: pnvm: don't skip everything when not reloadingJohannes Berg1-25/+25
Even if we don't reload the file from disk, we still need to trigger the PNVM load flow with the device; fix that. Signed-off-by: Johannes Berg <[email protected]> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
2021-01-25iwlwifi: pcie: avoid potential PNVM leaksJohannes Berg1-0/+3
If we erroneously try to set the PNVM data again after it has already been set, we could leak the old DMA memory. Avoid that and warn, we shouldn't be doing this. Signed-off-by: Johannes Berg <[email protected]> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
2021-01-25iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg1-0/+3
We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
2021-01-25iwlwifi: mvm: skip power command when unbinding vif during CSASara Sharon1-0/+3
In the new CSA flow, we remain associated during CSA, but still do a unbind-bind to the vif. However, sending the power command right after when vif is unbound but still associated causes FW to assert (0x3400) since it cannot tell the LMAC id. Just skip this command, we will send it again in a bit, when assigning the new context. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
2021-01-25Merge branch 'printk-rework' into for-linusPetr Mladek1-1/+1
2021-01-25spidev: Add cisco device compatibleDaniel Walker1-0/+1
Add compatible string for Cisco device present on the Cisco Petra platform. Signed-off-by: Daniel Walker <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5ELibin Yang1-0/+10
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX" and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E". Signed-off-by: Libin Yang <[email protected]> Co-developed-by: Hui Wang <[email protected]> Signed-off-by: Hui Wang <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookupStephan Gerhold1-1/+1
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real DAI ID, not an index into v->dai_driver. Looking it up again seems entirely redundant. For IPQ806x (and SC7180 since commit 09a4f6f5d21c ("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is now often an out-of-bounds read because the indexes in the "dai_driver" array no longer match the actual DAI ID. Cc: Srinivasa Rao Mandadapu <[email protected]> Cc: Srinivas Kandagatla <[email protected]> Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Stephan Gerhold <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682Tzung-Bi Shih1-0/+49
MT8192 determines the I2S clock rates according to the sampling rates. There is only 1 set of I2S in between MT8192 and RT5682. If playing and capturing via RT5682 in different sampling rates, the I2S data will be corrupted. Adds format constraints to the corresponding DAI links to make sure the sampling rates are symmetric. Fixes: 18b13ff23fab ("ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682") Signed-off-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: ak4458: correct reset polarityEliot Blennerhassett1-15/+7
Reset (aka power off) happens when the reset gpio is made active. Change function name to ak4458_reset to match devicetree property "reset-gpios" Signed-off-by: Eliot Blennerhassett <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: SOF: SND_INTEL_DSP_CONFIG dependencyPierre-Louis Bossart2-9/+12
The sof-pci-dev driver fails to link when built into the kernel and CONFIG_SND_INTEL_DSP_CONFIG is set to =m: arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe': sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe' As a temporary fix, use IS_REACHABLE to prevent the problem from happening. A more complete solution is to move this code to Intel-specific parts, restructure the drivers and Kconfig as discussed with Arnd Bergmann and Takashi Iwai. Fixes: 82d9d54a6c0e ("ALSA: hda: add Intel DSP configuration / probe code") Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2021-01-25ASoC: SOF: Intel: soundwire: fix select/depend unmet dependenciesPierre-Louis Bossart1-1/+2
The LKP bot reports the following issue: WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y] Selected by [y]: - SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y] This comes from having tristates being configured independently, when in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF choices: when the SOF code is compiled as built-in, the CONFIG_SOUNDWIRE also needs to be 'y'. The easiest fix is to replace the 'depends' with a 'select' and have a single user selection to activate SoundWire on Intel platforms. This still allows regmap to be compiled independently as a module. This is just a temporary fix, the select/depend usage will be revisited and the SOF Kconfig re-organized, as suggested by Arnd Bergman. Reported-by: kernel test robot <[email protected]> Fixes: a115ab9b8b93e ('ASoC: SOF: Intel: add build support for SoundWire') Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.