| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
FDFMTBEG is used by fdformat to calibrate before formatting a disk.
Neither the atari nor PC floppy driver sync data, which also seems
a bit pointless for a disk hat is about to get formatted.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
While changing the format of a floppy isn't strictly speaking a media
change, the effects are the same in that the content of the media
changes and the diskseq should be increased and uevent should be
sent. Switch from calling __invalidate_device to
disk_force_media_change to do so.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
nbd_clear_sock_ioctl kills the socket and with that the block
device. Instead of just invalidating file system buffers,
mark the device as dead, which will also invalidate the buffers
as part of the proper shutdown sequence. This also includes
invalidating partitions if there are any.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Remove 10us delay in cdns_spi_process_fifo() (called from cdns_spi_irq())
to fix data corruption issue on Master side when this driver
configured in Slave mode, as Slave is failed to prepare the date
on time due to above delay.
Add 10us delay before processing the RX FIFO as TX empty doesn't
guarantee valid data in RX FIFO.
Signed-off-by: Srinivas Goud <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Tested-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Commit 6f486556abe35 ("spi: stm32: renaming of spi_master into
spi_controller") included an accidential reverted of a change added in
commit 1e4929112507f ("spi: stm32: split large transfers based on word
size instead of bytes").
This breaks large SPI transfers with word sizes > 8 bits, which are
e.g. common when driving MIPI DBI displays.
Fix this by using `spi_split_transfers_maxwords()` instead of
`spi_split_transfers_maxsize()`.
Fixes: 6f486556abe35 ("spi: stm32: renaming of spi_master into spi_controller")
Signed-off-by: Leonard Göhrs <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
14s Yoga ITL
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
Signed-off-by: André Apitzsch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <[email protected]>
Reviewed-by: Gergő Köteles <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
It turns out that some PCSpecialist Elimina Pro 16 M models
have "GM6BGEQ" as DMI product-name instead of "Elimina Pro 16 M",
causing the existing DMI quirk to not work on these models.
The DMI board-name is always "GM6BGEQ", so match on that instead.
Fixes: 56fec0051a69 ("ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c36
Cc: All applicable <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Shubhra reports that their laptop is heating up over s2idle. Even though
it's getting into the deepest state, it appears to be having spurious
wakeup events.
While debugging a tangential issue with the RTC Carsten reports that recent
6.1.y based kernel face a similar problem.
Looking at acpidump and GPIO register comparisons these spurious wakeup
events are from the GPIO associated with the I2C touchpad on both laptops
and occur even when the touchpad is not marked as a wake source by the
kernel.
This means that the boot firmware has programmed these bits and because
Linux didn't touch them lead to spurious wakeup events from that GPIO.
To fix this issue, restore most of the code that previously would clear all
the bits associated with wakeup sources. This will allow the kernel to only
program the wake up sources that are necessary.
This is similar to what was done previously; but only the wake bits are
cleared by default instead of interrupts and wake bits. If any other
problems are reported then it may make sense to clear interrupts again too.
Cc: Sachi King <[email protected]>
Cc: [email protected]
Cc: Thorsten Leemhuis <[email protected]>
Fixes: 65f6c7c91cb2 ("pinctrl: amd: Revert "pinctrl: amd: disable and mask interrupts on probe"")
Reported-by: Shubhra Prakash Nandi <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217754
Reported-by: Carsten Hatger <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217626#c28
Signed-off-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.5 (take two)
- Fix race conditions in pinctrl group and function creation/remove
calls on the RZ/G2L, RZ/V2M, and RZ/A2 SoC families.
Signed-off-by: Linus Walleij <[email protected]>
|
|
The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[edit commit message]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Jakub asked if I'd be willing to be the maintainer of the macsec code
and review the driver code adding macsec offload, so let's add the
corresponding entry.
The keyword lines are meant to catch selftests and patches adding HW
offload support to other drivers.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix a regression in the caam driver and af_alg"
* tag 'v6.5-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: fix uninit-value in af_alg_free_resources
Revert "crypto: caam - adjust RNG timing to support more devices"
|
|
This might_sleep() goes back a long time: it was originally introduced
way back when by commit 010060741ad3 ("x86: add might_sleep() to
do_page_fault()"), and made it into the generic VM code when the x86
fault path got re-organized and generalized in commit c2508ec5a58d ("mm:
introduce new 'lock_mm_and_find_vma()' page fault helper").
However, it turns out that the placement of that might_sleep() has
always been rather questionable simply because it's not only a debug
statement to warn about sleeping in contexts that shouldn't sleep (which
was the original reason for adding it), but it also implies a voluntary
scheduling point.
That, in turn, is less than desirable for two reasons:
(a) it ends up being done after we successfully got the mmap_lock, so
just as we got the lock we will now eagerly schedule away and
increase lock contention
and
(b) this is all very possibly part of the "oops, things went horribly
wrong" path and we just haven't figured that out yet
After all, the whole _reason_ for having that get_mmap_lock_carefully()
rather than just doing the obvious mmap_read_lock() is because this code
wants to deal somewhat gracefully with potential kernel wild pointer
bugs.
So then a voluntary scheduling point here is simply not a good idea.
We could certainly turn the 'might_sleep()' into a '__might_sleep()' and
make it be just the debug check that it was originally intended to be.
But even that seems questionable in the wild kernel pointer case - which
again is part of the whole point of this code. The problem wouldn't be
about the _sleeping_ part of the page fault, but about a bad kernel
access. The fact that that bad kernel access might happen in a section
that you shouldn't sleep in is secondary.
So it really ends up being the case that this is simply entirely the
wrong place to do this debug check and related scheduling point at all.
So let's just remove the check entirely. It's been around for over a
decade, it has served its purpose.
The re-schedule will happen at return to user space anyway for the
normal case, and the warning - if we even need it - might be better off
done as a special case for "page fault from kernel mode" once we've
dealt with any potential kernel oopses where the oops is the relevant
thing, not some artificial "scheduling while atomic" test.
Reported-by: Mateusz Guzik <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Cc: Matthew Wilcox <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If an fsverity builtin signature is given for a file but the
".fs-verity" keyring is empty, there's no real reason to run the PKCS#7
parser. Skip this to avoid the PKCS#7 attack surface when builtin
signature support is configured into the kernel but is not being used.
This is a hardening improvement, not a fix per se, but I've added
Fixes and Cc stable to get it out to more users.
Fixes: 432434c9f8e1 ("fs-verity: support builtin file signatures")
Cc: [email protected]
Reviewed-by: Jarkko Sakkinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Eric Biggers <[email protected]>
|
|
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: [email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ruan Jinjie says:
====================
net: Fix return value check for fixed_phy_register()
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Changes in v3:
- Drop the error fix patch for fixed_phy_get_gpiod().
- Split the error code update code into another patch set as suggested.
- Update the commit title and message.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree")
Signed-off-by: Ruan Jinjie <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Acked-by: Doug Berger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets")
Signed-off-by: Ruan Jinjie <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
|
|
Pull rust fix from Miguel Ojeda:
- Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
under conditional compilation
* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)
|
|
Since commit 91a7cda1f4b8 ("net: phy: Fix race condition on link status
change") all the phy_error() method invocations have been causing the
nested-mutex-lock deadlock because it's normally done in the PHY-driver
threaded IRQ handlers which since that change have been called with the
phydev->lock mutex held. Here is the calls thread:
IRQ: phy_interrupt()
+-> mutex_lock(&phydev->lock); <--------------------+
drv->handle_interrupt() | Deadlock due
+-> ERROR: phy_error() + to the nested
+-> phy_process_error() | mutex lock
+-> mutex_lock(&phydev->lock); <-+
phydev->state = PHY_ERROR;
mutex_unlock(&phydev->lock);
mutex_unlock(&phydev->lock);
The problem can be easily reproduced just by calling phy_error() from any
PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock
mutex lock from the phy_process_error() method and printing a nasty error
message to the system log if the mutex isn't held in the caller execution
context.
Note for the fix to work correctly in the PHY-subsystem itself the
phydev->lock mutex locking must be added to the phy_error_precise()
function.
Link: https://lore.kernel.org/netdev/[email protected]
Fixes: 91a7cda1f4b8 ("net: phy: Fix race condition on link status change")
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Serge Semin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC)
for active optical cables supporting 25G and 100G speeds.
Since the specification makes no statement about transmitter range, and
as the specific sfp module that had been tested features only 2m fiber -
short-range (SR) modes are selected.
The 100G speed is irrelevant because it would require multiple fibers /
multiple SFP28 modules combined under one netdev.
sfp-bus.c only handles a single module per netdev, so only 25Gbps modes
are selected.
sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR
with compatible properties, however that entry is a contradiction in
itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely
be a mode for qsfp modules only.
Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r
interface mode and 25000baseSR link mode.
Also enforce SFP28 bitrate limits on the values read from sfp eeprom as
requested by Russell King.
Tested with fs.com S28-AO02 AOC SFP28 module.
Signed-off-by: Josua Mayer <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Usual set of driver fixes. A bit more than usual because I was
unavailable for a while"
* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
i2c: Update documentation to use .probe() again
i2c: sun6i-p2wi: Fix an error message in probe()
i2c: hisi: Only handle the interrupt of the driver's transfer
i2c: tegra: Fix i2c-tegra DMA config option processing
i2c: tegra: Fix failure during probe deferral cleanup
i2c: designware: Handle invalid SMBus block data response length value
i2c: designware: Correct length byte validation logic
i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix infinite loop in readdir(), could happen in a big directory when
files get renamed during enumeration
- fix extent map handling of skipped pinned ranges
- fix a corner case when handling ordered extent length
- fix a potential crash when balance cancel races with pause
- verify correct uuid when starting scrub or device replace
* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
btrfs: fix BUG_ON condition in btrfs_cancel_balance
btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
btrfs: fix replace/scrub failure with metadata_uuid
btrfs: fix infinite directory reads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb
* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
|
|
Pull block fixes from Jens Axboe:
"Main thing here is the fix for the regression in flush handling which
caused IO hangs/stalls for a few reporters. Hopefully that should all
be sorted out now. Outside of that, just a few minor fixes for issues
that were introduced in this cycle"
* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
blk-mq: release scheduler resource when request completes
blk-crypto: dynamically allocate fallback profile
blk-cgroup: hold queue_lock when removing blkg->q_node
drivers/rnbd: restore sysfs interface to rnbd-client
|
|
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 62a1573fcf84 ("NFSv4 fix acl retrieval over krb5i/krb5p mounts")
Signed-off-by: Fedor Pchelkin <[email protected]>
Reviewed-by: Benjamin Coddington <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
Fixes: a1f26739ccdc ("NFSv4.2: improve page handling for GETXATTR")
Signed-off-by: Fedor Pchelkin <[email protected]>
Reviewed-by: Benjamin Coddington <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Free the formatted server index string after it has been duplicated by
kobject_rename().
Fixes: 1c7251187dc0 ("NFS: add superblock sysfs entries")
Reported-by: Alexander Aring <[email protected]>
Signed-off-by: Benjamin Coddington <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/linux-block/[email protected]/
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <[email protected]>
Signed-off-by: Chengming Zhou <[email protected]>
Tested-by: Chuck Lever <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Based on the original code semantic in case of Clause 45 MDIO, the address
command is supposed to be followed by the command sending the MMD address,
not the CSR address. The commit 002dd3de097c ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most
likely due to an unfortunate variable name it switched the code to sending
the CSR address. In our case it caused the protocol malfunction so the
read operation always failed with the turnaround bit always been driven to
one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address
command.
Fixes: 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions")
Signed-off-by: Serge Semin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use WARN instead of printk + WARN_ON as reported from coccinelle:
./fs/dcache.c:1667:1-7: SUGGESTION: printk + WARN_ON can be just WARN
Signed-off-by: Anh Tuan Phan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The pointer buf is being initializated with a value that is never read,
it is being re-assigned later on at the pointer where it is being used.
The initialization is redundant and can be removed. Cleans up clang scan
build warning:
fs/pipe.c:492:24: warning: Value stored to 'buf' during its
initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
802.1X PAE frames are link-local frames, therefore they must be trapped to
the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
regular multicast frames, therefore flooding them to user ports. To fix
this, set 802.1X PAE frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes"
* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx: imx7-media-csi: Fix applying format constraints
media: uvcvideo: Fix menu count handling for userspace XU mappings
media: mtk-jpeg: Set platform driver data earlier
|
|
These have a variety of causes and a corresponding variety of solutions.
Signed-off-by: "Matthew Wilcox (Oracle)" <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
This documentation has bit-rotted over time.
Signed-off-by: "Matthew Wilcox (Oracle)" <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Extraordinary embargoed times call for extraordinary measures. That's
why this week's x86/urgent branch is larger than usual, containing all
the known fallout fixes after the SRSO mitigation got merged.
I know, it is a bit late in the game but everyone who has reported a
bug stemming from the SRSO pile, has tested that branch and has
confirmed that it fixes their bug.
Also, I've run it on every possible hardware I have and it is looking
good. It is running on this very machine while I'm typing, for 2 days
now without an issue. Famous last words...
- Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
sequence as latter clobbers flags which interferes with fastop
emulation in KVM, leading to guests freezing during boot
- A fix for the DIV(0) quotient data leak on Zen1 to clear the
divider buffers at the right time
- Disable the SRSO mitigation on unaffected configurations as it got
enabled there unnecessarily
- Change .text section name to fix CONFIG_LTO_CLANG builds
- Improve the optprobe indirect jmp check so that certain
configurations can still be able to use optprobes at all
- A serious and good scrubbing of the untraining routines by PeterZ:
- Add proper speculation stopping traps so that objtool is happy
- Adjust objtool to handle the new thunks
- Make the thunk pointer assignable to the different untraining
sequences at runtime, thus avoiding the alternative at the
return thunk. It simplifies the code a bit too.
- Add a entry_untrain_ret() main entry point which selects the
respective untraining sequence
- Rename things so that they're more clear
- Fix stack validation with FRAME_POINTER=y builds
- Fix static call patching to handle when a JMP to the return thunk
is the last insn on the very last module memory page
- Add more documentation about what each untraining routine does and
why"
* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/srso: Correct the mitigation status when SMT is disabled
x86/static_call: Fix __static_call_fixup()
objtool/x86: Fixup frame-pointer vs rethunk
x86/srso: Explain the untraining sequences a bit more
x86/cpu/kvm: Provide UNTRAIN_RET_VM
x86/cpu: Cleanup the untrain mess
x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
x86/cpu: Rename original retbleed methods
x86/cpu: Clean up SRSO return thunk mess
x86/alternative: Make custom return thunk unconditional
objtool/x86: Fix SRSO mess
x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
x86/cpu: Fix __x86_return_thunk symbol type
x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
x86/srso: Disable the mitigation on unaffected configurations
x86/CPU/AMD: Fix the DIV(0) initial fix attempt
x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix hardened usercopy BUG when using /proc based firmware update
interface
Thanks to Nathan Lynch and Kees Cook.
* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas_flash: allow user copy to flash block cache objects
|
|
Petr Machata says:
====================
mlxsw: Fixes for Spectrum-4
This patchset contains an assortment of fixes for mlxsw Spectrum-4 support.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes: 6d5d8ebb881c ("mlxsw: Rename virtual router flex key element")
Signed-off-by: Amit Cohen <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The two most significant bits of the "local_port" field in the SSPR
register are always cleared since they are overwritten by the deprecated
and overlapping "sub_port" field.
On systems with more than 255 local ports (e.g., Spectrum-4), this
results in the firmware maintaining invalid mappings between system port
and local port. Specifically, two different systems ports (0x1 and
0x101) point to the same local port (0x1), which eventually leads to
firmware errors.
Fix by removing the deprecated "sub_port" field.
Fixes: fd24b29a1b74 ("mlxsw: reg: Align existing registers to use extended local_port field")
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
[1]
WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum]
[...]
Call Trace:
<IRQ>
mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum]
mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core]
mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci]
tasklet_action_common.constprop.0+0x9f/0x110
__do_softirq+0xbb/0x296
irq_exit_rcu+0x79/0xa0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Danielle Ratson <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <[email protected]>
|