aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-08-03bnx2x: Fix BCM84833 linkYaniv Rosner1-9/+12
BCM84833 fail to link due to incorrect auto-negotiation setting. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix link issue with DAC over 578xxYaniv Rosner1-0/+3
Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix LED behaviorYaniv Rosner1-7/+17
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix BCM578xx-B0 MDIO accessYaniv Rosner3-3/+18
Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix remote fault handlingYaniv Rosner3-45/+69
Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix chip hanging due to TX pipe stall.Yaniv Rosner1-1/+11
Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable. This occurs since TX pipe is stalled due to missing XON indication towards the NIG. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03bnx2x: Fix missing pause on for 578xxYaniv Rosner2-0/+8
When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_dataKiran Patil3-49/+78
Problem: HW DDP context was not invalidated in case of ABORTS, etc... This leads to the problem where memory pages which are used for DDP as user descriptor could get reused for some other purpose (such as to satisfy new memory allocation request either by kernel or user mode threads) and since HW DDP context was not invalidated, HW continue to write to those pages, hence causing memory corruption. Fix: Either on incoming ABORTS or due to exchange time out, allowed the target to cleanup HW DDP context if it was setup for respective ft_cmd. Added new function to perform this cleanup, furthur it can be enhanced for other cleanup activity. Fix ft_recv_write_data() to properly handle fc_frame_payload_get to return pointer to payload if it exist. If there is no payload which is most common case (+ve case in case if DDP is working as expected, it will return NULL. Yes, scope of buf is limited to printk. Invalidation of HW context (which is done inside ft_invl_hw_context() is necessary in SUCCESS and FAILURE case of DDP. Hence invalidation is DONE as long as there was DDP setup (whether it worked correctly or not, NOTE: For some reason, if there is any error w.r.t DDP such as out of order packet reception, HW simply post the full packet in rx queue. Signed-off-by: Kiran Patil <[email protected]> Cc: Robert W Love <[email protected]> Signed-off-by: Nicholas A. Bellinger <[email protected]>
2011-08-02Merge branch 'pstore-efi' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: efivars: fix warnings when CONFIG_PSTORE=n
2011-08-02Merge branch 'tools-release' of ↵Linus Torvalds2-26/+25
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: tools/power turbostat: fit output into 80 columns on snb-ep tools/power x86_energy_perf_policy: fix print of uninitialized string
2011-08-02Merge branch 'release' of ↵Linus Torvalds30-132/+352
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits) ACPI: delete stale reference in kernel-parameters.txt ACPI: add missing _OSI strings ACPI: remove NID_INVAL thermal: make THERMAL_HWMON implementation fully internal thermal: split hwmon lookup to a separate function thermal: hide CONFIG_THERMAL_HWMON ACPI print OSI(Linux) warning only once ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUX ACPI / Battery: propagate sysfs error in acpi_battery_add() ACPI / Battery: avoid acpi_battery_add() use-after-free ACPI: introduce "acpi_rsdp=" parameter for kdump ACPI: constify ops structs ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS ACPI: fix 80 char overflow ACPI / Battery: Resolve the race condition in the sysfs_remove_battery() ACPI / Battery: Add the check before refresh sysfs in the battery_notify() ACPI / Battery: Add the hibernation process in the battery_notify() ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks ACPI / Battery: Change 16-bit signed negative battery current into correct value ACPI / Battery: Add the power unit macro ...
2011-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds46-49/+576
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile/mm/init.c: trivial: use BUG_ON arch/tile: remove useless set_fixmap_nocache() macro arch/tile: add hypervisor-based character driver for SPI flash ROM ioctl-number.txt: add the tile hardwall ioctl range tile: use generic-y format for one-line asm-generic headers clocksource: tile: convert to use clocksource_register_hz
2011-08-02Merge branch 'for-linus' of ↵Linus Torvalds19-528/+269
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (31 commits) Btrfs: don't call writepages from within write_full_page Btrfs: Remove unused variable 'last_index' in file.c Btrfs: clean up for find_first_extent_bit() Btrfs: clean up for wait_extent_bit() Btrfs: clean up for insert_state() Btrfs: remove unused members from struct extent_state Btrfs: clean up code for merging extent maps Btrfs: clean up code for extent_map lookup Btrfs: clean up search_extent_mapping() Btrfs: remove redundant code for dir item lookup Btrfs: make acl functions really no-op if acl is not enabled Btrfs: remove remaining ref-cache code Btrfs: remove a BUG_ON() in btrfs_commit_transaction() Btrfs: use wait_event() Btrfs: check the nodatasum flag when writing compressed files Btrfs: copy string correctly in INO_LOOKUP ioctl Btrfs: don't print the leaf if we had an error btrfs: make btrfs_set_root_node void Btrfs: fix oops while writing data to SSD partitions Btrfs: Protect the readonly flag of block group ... Fix up trivial conflicts (due to acl and writeback cleanups) in - fs/btrfs/acl.c - fs/btrfs/ctree.h - fs/btrfs/extent_io.c
2011-08-02Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds5-11/+16
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: MAINTAINERS: Add keyword match for of_match_table to device tree section of: constify property name parameters for helper functions input: xilinx_ps2: Add missing of_address.h header of: address: use resource_size helper
2011-08-02Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-8/+3
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: remove function cannot exit
2011-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dmLinus Torvalds21-404/+1561
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (34 commits) dm table: set flush capability based on underlying devices dm crypt: optionally support discard requests dm raid: add md raid1 support dm raid: support metadata devices dm raid: add write_mostly parameter dm raid: add region_size parameter dm raid: improve table parameters documentation dm ioctl: forbid multiple device specifiers dm ioctl: introduce __get_dev_cell dm ioctl: fill in device parameters in more ioctls dm flakey: add corrupt_bio_byte feature dm flakey: add drop_writes dm flakey: support feature args dm flakey: use dm_target_offset and support discards dm table: share target argument parsing functions dm snapshot: skip reading origin when overwriting complete chunk dm: ignore merge_bvec for snapshots when safe dm table: clean dm_get_device and move exports dm raid: tidy includes dm ioctl: prevent empty message ...
2011-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdogLinus Torvalds3-4/+9
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog: watchdog: Cleanup WATCHDOG_CORE help text watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boards watchdog: shwdt: fix usage of mod_timer
2011-08-02Merge branch 'for-linus' of ↵Linus Torvalds6-14/+128
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: asihpi - Clarify adapter index validity check ALSA: asihpi - Don't leak firmware if mem alloc fails ALSA: rtctimer.c needs module.h ASoC: Fix txx9aclc.c build ALSA: hdspm - Add firmware revision 0xcc for RME MADI ALSA: hdspm - Fix reported external sample rate on RME MADI and MADIface ALSA: hdspm - Provide MADI speed mode selector on RME MADI and MADIface ALSA: sound/core/pcm_compat.c: adjust array index
2011-08-02Input: ad7879 - fix deficient device disableMichael Hennerich1-1/+3
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by: Michael Hennerich <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-08-02Input: gpio_keys - fix two typos in devicetree documentationTobias Klauser1-1/+1
Signed-off-by: Tobias Klauser <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-08-03RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cachedAl Viro2-20/+15
Signed-off-by: Al Viro <[email protected]>
2011-08-03get rid of boilerplate switches in posix_acl.hAl Viro1-42/+20
the only potentially subtle thing here: get_cached_acl() is never called with the second argument other than ACL_TYPE_{ACCESS,DEFAULT}. IOW, that return ERR_PTR(-EINVAL) in there might as well be BUG(). Signed-off-by: Al Viro <[email protected]>
2011-08-02sparc: Use popc when possible for ffs/__ffs/ffz.David S. Miller7-15/+126
Signed-off-by: David S. Miller <[email protected]>
2011-08-02sparc: Set reboot-cmd using reboot data hypervisor call if available.David S. Miller5-9/+53
Signed-off-by: David S. Miller <[email protected]>
2011-08-02sparc: Add some missing hypervisor API groups.David S. Miller2-0/+12
Signed-off-by: David S. Miller <[email protected]>
2011-08-02sparc: Use hweight64() in popc emulation.David S. Miller1-11/+4
Signed-off-by: David S. Miller <[email protected]>
2011-08-02sparc: Use popc if possible for hweight routines.David S. Miller7-40/+102
Just like powerpc, we code patch at boot time. Signed-off-by: David S. Miller <[email protected]>
2011-08-02sparc: Minor tweaks to Niagara page copy/clear.David S. Miller4-102/+77
Don't use floating point on Niagara2, use the traditional plain Niagara code instead. Unroll Niagara loops to 128 bytes for copy, and 256 bytes for clear. Signed-off-by: David S. Miller <[email protected]>
2011-08-03cifs: demote DFS referral lookup errors to cFYIJeff Layton2-4/+5
cifs: demote DFS referral lookup errors to cFYI Now that we call into this routine on every mount, anyone who doesn't have the upcall configured will get multiple printks about failed lookups. Reported-and-Tested-by: Martijn Uffing <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-08-03Revert "cifs: advertise the right receive buffer size to the server"Steve French1-2/+1
This reverts commit c4d3396b261473ded6f370edd1e79ba34e089d7e. Problems discovered with readdir to Samba due to not accounting for header size properly with this change
2011-08-02r8169 : MAC address change fix for the 8168e-vl.françois romieu1-0/+27
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39252 Hayes suggested that the usual MAC{0, 4} register writes be completed with writes to extended GigaMAC registers : - 0xe0 .. 0xe5 - 0xf2 .. 0xf7 Registers 0xf0 and 0xf1 should be set to 0. Signed-off-by: Francois Romieu <[email protected]> Cc: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-02tools/power turbostat: fit output into 80 columns on snb-epLen Brown1-23/+23
Reduce columns for package number to 1. If you can afford more than 9 packages, you can also afford a terminal with more than 80 columns:-) Also shave a column also off the package C-states Signed-off-by: Len Brown <[email protected]>
2011-08-02efivars: fix warnings when CONFIG_PSTORE=nTony Luck1-3/+3
drivers/firmware/efivars.c:161: warning: ‘utf16_strlen’ defined but not used utf16_strlen() is only used inside CONFIG_PSTORE - make this "static inline" to shut the compiler up [thanks to hpa for the suggestion]. drivers/firmware/efivars.c:602: warning: initialization from incompatible pointer type Between v1 and v2 of this patch series we decided to make the "part" number unsigned - but missed fixing the stub version of efi_pstore_write() Acked-by: Matthew Garrett <[email protected]> Acked-by: Mike Waychison <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2011-08-02Merge branches 'acpica', 'battery', 'boot-irqs', 'bz-24492', 'bz-9528', ↵Len Brown157-744/+1471
'from-akpm', 'kexec-param' and 'misc' into release Conflicts: Documentation/kernel-parameters.txt Signed-off-by: Len Brown <[email protected]>
2011-08-02ACPI: delete stale reference in kernel-parameters.txtLen Brown1-2/+0
Says for acpi= See also Documentation/power/pm.txt, pci=noacpi but this file does not exist Reported-by: Alan Cox <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02arch/tile/mm/init.c: trivial: use BUG_ONJulia Lawall1-2/+1
Use BUG_ON(x) rather than if(x) BUG(); The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; @@ -if (x) BUG(); +BUG_ON(x); @@ identifier x; @@ -if (!x) BUG(); +BUG_ON(!x); // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Chris Metcalf <[email protected]>
2011-08-02Merge tag 'v3.0' of ↵Chris Metcalf1367-8728/+40132
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus
2011-08-02ACPI: add missing _OSI stringsShaohua Li1-1/+7
Linux supports some optional features, but it should notify the BIOS about them via the _OSI method. Currently Linux doesn't notify any, which might make such features not work because the BIOS doesn't know about them. Jarosz has a system which needs this to make ACPI processor aggregator device work. Reported-by: "Jarosz, Sebastian" <[email protected]> Signed-off-by: Shaohua Li <[email protected]> Acked-by: Matthew Garrett <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02ACPI: remove NID_INVALDavid Rientjes1-1/+0
b552a8c56db8 ("ACPI: remove NID_INVAL") removed the left over uses of NID_INVAL, but didn't actually remove the definition. Remove it. Signed-off-by: David Rientjes <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02thermal: make THERMAL_HWMON implementation fully internalJean Delvare2-47/+92
THERMAL_HWMON is implemented inside the thermal_sys driver and has no effect on drivers implementing thermal zones, so they shouldn't see anything related to it in <linux/thermal.h>. Making the THERMAL_HWMON implementation fully internal has two advantages beyond the cleaner design: * This avoids rebuilding all thermal drivers if the THERMAL_HWMON implementation changes, or if CONFIG_THERMAL_HWMON gets enabled or disabled. * This avoids breaking the thermal kABI in these cases too, which should make distributions happy. The only drawback I can see is slightly higher memory fragmentation, as the number of kzalloc() calls will increase by one per thermal zone. But I doubt it will be a problem in practice, as I've never seen a system with more than two thermal zones. Signed-off-by: Jean Delvare <[email protected]> Cc: Rene Herman <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02thermal: split hwmon lookup to a separate functionJean Delvare1-6/+19
We'll soon need to reuse it. Signed-off-by: Jean Delvare <[email protected]> Cc: Rene Herman <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02thermal: hide CONFIG_THERMAL_HWMONJean Delvare2-15/+2
It's about time to revert 16d752397301b9 ("thermal: Create CONFIG_THERMAL_HWMON=n"). Anybody running a kernel >= 2.6.40 would also be running a recent enough version of lm-sensors. Actually having CONFIG_THERMAL_HWMON is pretty convenient so instead of dropping it, we keep it but hide it. Signed-off-by: Jean Delvare <[email protected]> Cc: Rene Herman <[email protected]> Acked-by: Guenter Roeck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Len Brown <[email protected]>
2011-08-02iwlagn: 5000 do not support idle modeWey-Yi Guy3-1/+5
5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: [email protected] #2.6.39, #3.0.0 Reported-by: Devin J Pohly <[email protected]> Signed-off-by: Wey-Yi Guy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-08-02rt2x00: fix usage of NULL queueStanislaw Gruszka1-2/+3
We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe778412b36791b7897cfa139342906fbbf07b "rt2x00: Fix stuck queue in tx failure case" . Cc: [email protected] # 3.0+ Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Ivo van Doorn <[email protected]> Acked-by: Gertjan van Wingerde <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-08-02rt2x00: Fix compilation without CONFIG_RT2X00_LIB_CRYPTOHelmut Schaa1-1/+2
This was introduced by commit 77b5621bac4a56b83b9081f48d4e7d1accdde400 (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: Helmut Schaa <[email protected]> Acked-by: Gertjan van Wingerde <[email protected]> Acked-by: Ivo van Doorn <[email protected]> Reported-by: Randy Dunlap <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-08-02iwlagn: sysfs couldn't find the priv pointerEmmanuel Grumbach1-9/+9
This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach <[email protected]> Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach <[email protected]> Tested-by: Daniel Halperin <[email protected]> Signed-off-by: Wey-Yi Guy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-08-02MAINTAINERS: Add keyword match for of_match_table to device tree sectionMark Brown1-0/+1
If a patch is working with an of_match_table it's probably adding an OF binding to a driver in which case the binding ought to be reviewed by the device tree folks to make sure that things like the device matches are set up correctly. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-08-02of: constify property name parameters for helper functionsJamie Iles2-9/+13
The helper functions for reading u32 integers, u32 arrays and strings should have the property name as a const pointer. Cc: Grant Likely <[email protected]> Signed-off-by: Jamie Iles <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-08-02spi/pl022: remove function cannot exitLinus Walleij1-8/+3
The remove function in the PL022 driver cannot abort the remove function any way, so restructure the code so as not to make that assumption. Remove will now proceed no matter whether it can stop the transfer queue or not. Reported-by: Russell King <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2011-08-02dm table: set flush capability based on underlying devicesMike Snitzer2-1/+43
DM has always advertised both REQ_FLUSH and REQ_FUA flush capabilities regardless of whether or not a given DM device's underlying devices also advertised a need for them. Block's flush-merge changes from 2.6.39 have proven to be more costly for DM devices. Performance regressions have been reported even when DM's underlying devices do not advertise that they have a write cache. Fix the performance regressions by configuring a DM device's flushing capabilities based on those of the underlying devices' capabilities. Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.