aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-07-06ASoC: dapm: Mark widgets as dirty when a route is addedMark Brown1-0/+4
If we add a new route at runtime then we'll need to recheck the connections to the affected widgets. Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-06ASoC: dpcm: Allow FE to be opened without valid BE routes.Liam Girdwood1-3/+1
Some userspace will open a PCM device and then configure mixers for routing before triggering. This patch allows userspace to do this sequence. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: twl6040: fix spelling mistakeSimon Wilson1-1/+1
Fix spelling mistake in "High-Performance" option of twl6040 power mode. Signed-off-by: Simon Wilson <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: dapm: Make sure all dapm contexts are updatedLiam Girdwood1-3/+3
Make sure we set the bias level for all DAPM contexts when changing level. Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: pcm: Clean up logging in soc_new_pcm()Liam Girdwood1-4/+4
Use dev_ style logging throughout soc_new_pcm() Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-06ASoC: dapm: Fix locking during codec shutdownLiam Girdwood1-0/+5
Codec shutdown performs a DAPM power sequence that might cause conflicts and/or race conditions if another stream power event is running simultaneously. Use card's dapm mutex to protect any potential race condition between them. Signed-off-by: Misael Lopez Cruz <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2012-07-06ALSA: usb-audio: Fix the first PCM interface assignmentTakashi Iwai1-2/+2
In the new PCM streaming logic, the interface number is assigned to usb stream instance (subs->interface) after the format and rate setups are succeeded, but some codes are still passing subs->interface as the reference to helper functions. This leads to initializing with an invalid iface number (-1). This patch replaces the wrong references with the ones from the target fmt correctly. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-05ASoC: wm1250-ev1: Flag all supported rates in the DAIMark Brown1-2/+5
Not previously noticed due to normal usage being with CODEC<->CODEC links. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: wm5102: Allow routing through the ASRCsMark Brown1-1/+29
This enables common telephony use cases. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: arizona: Enable ASYNCCLK domain for audio interfacesMark Brown1-6/+24
If an audio interface is configured to use ASYNCCLK then update the asynchronous sample rate rather than one of our primary sample rates. Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: imx-mc13783: Add audmux settings for mx27pdkFabio Estevam1-16/+33
mx27pdk board also has a mc13783 codec. Add support for it and do a run-time machine type check to perform the correct audiomux settings. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-05ASoC: fsl: remove unneeded AUDMUX register setting from imx-sgtl5000Hui Wang1-2/+1
If we don't set IMX_AUDMUX_V2_PTCR_TCLKDIR in the AUDMUX PTCR register (means Tx clock pin is input), we don't need to set IMX_AUDMUX_V2_PTCR_TCSEL as well. Since both i.MX35, i.MX51 and i.MX6 datasheet says "When Tx clock pin set as an input, the TCSEL settings are ignored". Signed-off-by: Hui Wang <[email protected]> Acked-by: Shawn Guo <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-05ALSA: pcm: Make constraints lists constMark Brown2-3/+3
They aren't modified by the core so the drivers can declare them const. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-07-05ALSA: hda - Always call standard unsolicited event for Realtek codecsDavid Henningsson1-18/+3
With the model parsers out of the way, we have no custom unsol events to worry about, we can therefore simplify the code. In addition, this fixes a bug on the ASUS TC710, which has only a headphone jack and a mic jack, but no internal mic or speakers. Therefore the unsol_event pointer was not set, and as a result, the jack kcontrols were not correctly updated. BugLink: https://bugs.launchpad.net/bugs/1021192 Signed-off-by: David Henningsson <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-07-04ASoC: arizona: Be more forgiving in BCLK selectionMark Brown1-1/+2
Allow any BCLK which can be divided down to generate LRCLK, not just the lowest possible BCLK to clock out the samples. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: arizona: Implement AIF clock configurationMark Brown3-0/+118
Allow the user to select which of the system clocks each AIF is referenced to and constran the DAI to the set of frequencies which can be generated from that clock. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: arizona: Rename current rates tables to bclk_ratesMark Brown1-6/+6
They're the rates for the BCLK, not for the sample rate, so rename so that we don't confuse ourselves. Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: dwc: Staticise non-exported i2s_start()Mark Brown1-1/+2
Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: SPEAr spdif_out: Add spdif out supportVipin Kumar2-0/+468
This patch implements the spdif out driver for ST peripheral. This peripheral implements IEC60958 standard Signed-off-by: Vipin Kumar <[email protected]> Signed-off-by: Rajeev Kumar <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: STA529: Add support for STA529 Audio CodecRajeev Kumar3-0/+447
The STA529 is a digital stereo class-D audio amplifier. It includes an audio DSP, an ST proprietary high-efficiency class-D driver and CMOS power output stage. It is intended for high-efficiency digital-to-power-audio conversion for portable applications. Signed-off-by: Rajeev Kumar <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: tlv320aic3x: extending registers cacheJiri Prchal1-1/+3
Adds missing register default values to cache. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04ASoC: tlv320aic3x: add missing registers and bitsJiri Prchal1-1/+18
Adds register and bit shift definitions in header file. Changes are for TLV320AIC310x based on data sheet. Signed-off-by: Jiri Prchal <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-04Merge branch 'topic/hda-beep' into topic/hdaTakashi Iwai994-5425/+11661
2012-07-03ASoC: wm8994: Don't suspend accessory detectionMark Brown1-37/+0
Leave it up to the machine driver to disable accessory detection if desired, the common pattern is to have accessory detection be a wake source. Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: core: Try to use regmap if the driver doesn't set up any I/OMark Brown1-0/+4
Since most new drivers are expected to use regmap and since frequently the only thing we need to do in the CODEC probe function is configure the I/O try to initialise the register I/O using regmap if the driver hasn't done so after probe(). Signed-off-by: Mark Brown <[email protected]> Acked-by: Liam Girdwood <[email protected]>
2012-07-03ASoC: wm8962: Log AIF configuration requested by hw_params()Mark Brown1-0/+3
Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: dapm: Fix dapm_set_path_status() connectBenoît Thébaudeau1-4/+3
dapm_set_path_status() sets connect incorrectly in the case max > 1 with invert. In that case, the raw disconnect value should be max, which corresponds to the userspace value 0. This use case currently does not appear upstream, but it could break SOC_DAPM_SINGLE() or SOC_DAPM_SINGLE_TLV() elsewhere or in the future. This patch completes commit 3a9abe8. Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: <[email protected]> Signed-off-by: Benoît Thébaudeau <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: tegra: use dmaengine based dma driverLaxman Dewangan3-1/+119
Use the dmaengine based Tegra APB DMA driver for data transfer between SPI fifo and memory in place of legacy Tegra APB DMA. Because generic soc-dmaengine-pcm uses the DMAs API based on dmaengine, using the exported APIs provided by this generic driver. The new driver is selected if legacy driver is not selected and new dma driver is enabled through config file. Signed-off-by: Laxman Dewangan <[email protected]> Acked-by: Stephen Warren <[email protected]> Tested-by: Stephen Warren <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: dapm: Remove incomplete stereo codeBenoît Thébaudeau1-10/+12
Stereo is not yet supported by dapm widgets, so remove stereo code from snd_soc_dapm_get_volsw(), and warn if stereo controls are detected. Signed-off-by: Benoît Thébaudeau <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ASoC: smdk_wm8994: Convert to use snd_soc_register_card()Sachin Kamat1-13/+23
Current method for machine driver to register with the ASoC core is to use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Sangbeom Kim <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-07-03ALSA: hda - Avoid possible race of beep on/offTakashi Iwai1-2/+3
Call cancel_work_sync() when turning off the beep switch so that the mute call is executed in a proper order. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Get rid of superfluous beep->mode fieldTakashi Iwai2-9/+6
It's no longer necessary since beep_mode=2 option was dropped. It can be checked simply via codec->beep != NULL. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Move beep helper functions to hda_beep.cTakashi Iwai3-20/+31
Move snd_hda_mixer_amp_switch_put_beep() to hda_beep.c as a clean up to remove one more ifdef. Also add the corresponding get callback to return consistently the digital beep state independently from the mixer amp value. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: hda - Remove beep_mode=2Takashi Iwai5-49/+8
The beep_mode=2 option was introduced to make the beep mixer controlling the beep input allocation/deallocation dynamically, so that a user can switch between HD-audio codec digital beep and the system beep only via mixer API. This was necessary because the keyboard driver took only the first input beep instance at that time. However, the recent keyboard driver already processes the multiple input instances, thus there is no point to keep this mode. Let's remove it. Acked-by: Jaroslav Kysela <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: Move some headers to local directories from include/soundTakashi Iwai15-21/+21
This is a bit clean up of public sound header directory. Some header files in include/sound aren't really necessary to be located there but can be moved to their local directories gracefully. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: pdaudiocf: Remove superfluous pm_message_t argument from suspendTakashi Iwai3-3/+3
Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: Convert to new pm_ops for PCI driversTakashi Iwai59-325/+496
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <[email protected]>
2012-07-03ALSA: convert PM ops of platform_driver to new pm opsTakashi Iwai7-51/+58
Signed-off-by: Takashi Iwai <[email protected]>
2012-07-02ALSA: Add missing .owner=THIS_MODULE to platform_driver definitionsTakashi Iwai13-10/+24
Signed-off-by: Takashi Iwai <[email protected]>
2012-07-01ASoC: mioa701: convert to snd_soc_register_card APIRobert Jarzmik1-21/+12
The mioa701 board code is converted to the snd_soc_register_card() and snd_soc_unregister_card() APIs. Signed-off-by: Robert Jarzmik <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-06-30Linux 3.5-rc5Linus Torvalds1-1/+1
2012-06-30Merge tag 'fixes-for-linus' of ↵Linus Torvalds14-19/+37
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30printk.c: fix kernel-doc warningsRandy Dunlap1-1/+1
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-06-30linux/irq.h: fix kernel-doc warningRandy Dunlap1-2/+0
Fix kernel-doc warning. This struct member was removed in commit 875682648b89 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by: Randy Dunlap <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-06-30Merge branch 'v3.5-samsung-fixes-1' of ↵Olof Johansson3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
2012-06-30ARM: imx6q: fix suspend regression caused by common clk migrationShawn Guo1-2/+4
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2012-06-30Merge tag 'omap-fixes-for-v3.5-rc4' of ↵Olof Johansson2-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
2012-06-30Merge branch 'release' of ↵Linus Torvalds8-21/+59
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
2012-06-30Merge tag 'driver-core-3.5-rc5' of ↵Linus Torvalds2-84/+219
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <[email protected]>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
2012-06-30Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', ↵Len Brown8980-322932/+529713
'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
Powered by cgit, Gruvboxed by Blaster4385.