aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-09-03[SCSI] scsi_debug: fix endianness bug in sdebug_build_parts()Akinobu Mita1-2/+2
With module parameter num_parts > 0, partition table is built on the ramdisk storage when loading the driver. Unfortunately, there is an endianness bug in sdebug_build_parts(). So the partition table is not correctly initialized on big-endian systems. Signed-off-by: Akinobu Mita <[email protected]> Tested-by: Martin Peschke <[email protected]> Acked-by: Douglas Gilbert <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Update the driver version to 8.06.00.08-k.Saurav Kashyap1-2/+2
Signed-off-by: Giridhar Malavali <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: print MAC via %pMR.Andy Shevchenko1-4/+1
Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Correction to message ids.Saurav Kashyap4-11/+15
Signed-off-by: Giridhar Malavali <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Correctly print out/in mailbox registers.Joe Carnuccio1-15/+13
At mailbox/buffer debug level, print the correct values of the outgoing and incoming mailbox registers. Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add a new interface to update versions.Sawan Chandak2-3/+15
On any Adapter when we flash through FC/FCoE without card reset option it still shows the Running FW version in Flashed FW version. This new interface will be used by API to instruct the driver to update its cache versions. Signed-off-by: Sawan Chandak <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Move queue depth ramp down message to i/o debug level.Chad Dupuis1-1/+1
Unless there is a need to observe them, the queue depth ramp up/down messages are a nuisance and may cause the system to become unresponsive so move it a non-default logging level. Signed-off-by: Chad Dupuis <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Select link initialization option bits from current ↵Joe Carnuccio1-1/+5
operating mode. Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add loopback IDC-TIME-EXTEND aen handling support.Santosh Vernekar4-20/+47
Earlier IDC-TIME-EXTEND aen was a nop and ignored by driver. We now have to handle the aen so that other protocol drivers can use time extension during some loopback operations. Signed-off-by: Santosh Vernekar <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Set default critical temperature value in cases when ISPFX00 ↵Armen Baloyan2-1/+6
firmware doesn't provide it Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: QLAFX00 make over temperature AEN handling informational, ↵Armen Baloyan2-2/+14
add log for normal temperature AEN Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Correct Interrupt Register offset for ISPFX00Armen Baloyan1-1/+1
Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Remove handling of Shutdown Requested AEN from ↵Armen Baloyan1-4/+0
qlafx00_process_aen(). Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Send all AENs for ISPFx00 to above layers.Armen Baloyan1-2/+4
Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add changes in initialization for ISPFX00 cards with BIOSArmen Baloyan2-0/+12
Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add changes to support extended IOs for ISPFX00Armen Baloyan3-6/+12
Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add missing FCP statistics to sysfs interface.Joe Carnuccio6-3/+55
Add the missing FCP statistics to sysfs. Add reset FCP statistics functionality via sysfs. Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Make log message that prints when a completion status ↵Chad Dupuis1-2/+4
requires a port down more readable. Signed-off-by: Chad Dupuis <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add critical temperature handling for ISPFX00.Armen Baloyan5-17/+104
Signed-off-by: Armen Baloyan <[email protected]> Acked-by: Srinivasa Rao <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Notify ISPFX00 firmware when driver is unloaded or system is ↵Armen Baloyan3-1/+9
shut down. Signed-off-by: Armen Baloyan <[email protected]> Acked-by: Srinivasa Rao <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Reconfigure thermal temperature.Joe Carnuccio9-41/+53
For supported ISPS, Read asic temperature by calling the GET PARAMS (type C) mailbox command. Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add setting of driver version string for vendor application.Joe Carnuccio5-1/+119
Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.Chad Dupuis2-14/+1
Signed-off-by: Chad Dupuis <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add ISPFX00 specific bus reset routine.Armen Baloyan4-4/+30
Signed-off-by: Armen Baloyan <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Perform warm reset every 2 minutes if firmware load fails ↵Armen Baloyan1-0/+8
for ISPFX00. Signed-off-by: Armen Baloyan <[email protected]> Acked-by: Srinivasa Rao <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Set factory reset recovery timeout to 10 min. for ISPFX00.Armen Baloyan2-0/+4
Signed-off-by: Armen Baloyan <[email protected]> Acked-by: Srinivasa Rao <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Correct multiqueue offset calculations.Andrew Vasquez4-24/+18
Signed-off-by: Andrew Vasquez <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Fix incorrect test after list_for_each_entry() exits.Joe Carnuccio1-1/+4
list_for_each_entry() never leaves the iterator pointing to null. Signed-off-by: Joe Carnuccio <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Add support for ISP8044.Atul Deshmukh18-158/+4849
[jejb: checkpatch fixes] Signed-off-by: Atul Deshmukh <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla2xxx: Print some variables to hexadecimal string via %*phN formatOleksandr Khoshaba8-181/+58
The patch changes a specifier used to output some variables. Instead of using stack for each byte the '%*ph[CN]' allows to take a one pointer and prints entire buffer as a hexadecimal string with the separator ':' or ''. Signed-off-by: Oleksandr Khoshaba <[email protected]> Signed-off-by: Saurav Kashyap <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] mpt3sas: Remove phys on topology changeJan Vesely1-1/+4
Signed-off-by: Jan Vesely <[email protected]> Acked-by: Sreekanth Reddy <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] mpt2sas: Remove phys on topology change.Jan Vesely1-1/+4
Signed-off-by: Jan Vesely <[email protected]> Acked-by: Sreekanth Reddy <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] bfa: firmware update to 3.2.1.1Rasesh Mody1-3/+3
This patch updates the firmware to address the thermal notification issue Signed-off-by: Rasesh Mody <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] esas2r: ATTO Technology ExpressSAS 6G SAS/SATA RAID Adapter DriverBradley Grove19-0/+15669
This is a new driver for ATTO Technology's ExpressSAS series of hardware RAID adapters. It supports the following adapters: - ExpressSAS R60F - ExpressSAS R680 - ExpressSAS R608 - ExpressSAS R644 Signed-off-by: Bradley Grove <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] eata_pio: off by one in eata_pio_detect()Dan Carpenter1-1/+1
Smatch complains that the reg_IRQ[] array only has MAXIRQ (16) elements so we are one space beyond the end of the array here. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Update driver version to 5.04.00-k1Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Return error if minidump data collection failsVikas Chaudhary1-0/+1
Return error from function qla4_8xxx_collect_md_data() if minidump data collection fails. Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Fix the minidump data collection check in for loopSantosh Vernekar1-5/+3
Signed-off-by: Santosh Vernekar <[email protected]> Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Add pex-dma support for capturing minidumpSantosh Vernekar4-3/+263
Add pex-dma support for ISP8324 and ISP8042 to improve the minidump capture time. Signed-off-by: Santosh Vernekar <[email protected]> Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] zfcp: enable FCP hardware data router by defaultSteffen Maier1-2/+2
Enabling the data router support by default can increase performance in certain situations. It is safe to do so and tolerated in LPAR and under z/VM in case there is no data router support in that environment. Signed-off-by: Steffen Maier <[email protected]> Reviewed-by: Martin Peschke <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] zfcp: dead code removalMartin Peschke2-11/+0
Get rid of unused function zfcp_fsf_get_req and corresponding prototype definition. Commit a54ca0f62f953898b05549391ac2a8a4dad6482b in v2.6.28 "[SCSI] zfcp: Redesign of the debug tracing for HBA records." accidentally introduced this code which was dead in the first place. Signed-off-by: Martin Peschke <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] zfcp: cleanup use of obsolete strict_strto* functionsMartin Peschke2-8/+8
strict_strtoul and friends are obsolete. Use kstrtoul functions instead. Signed-off-by: Martin Peschke <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] zfcp: consistently use appropriate SBAL flag definitionsMartin Peschke1-1/+2
minor cleanup for status read request Signed-off-by: Martin Peschke <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] mpt3sas: Added a driver module parameter max_msix_vectorsSreekanth Reddy1-0/+14
Added a driver module parameter max_msix_vectors. Using this module parameter the maximum number of MSI-X vectors could be set. The number of MSI-X vectors used would be the minimum of MSI-X vectors supported by the HBA, the number of CPU cores and the value set to max_msix_vectors module parameter. The default value of this module parameter is set to 8. The default value of this parameter is set to 8 inorder to reduce the amount of memory required for Reply Descriptor Post queue. This is because with the higher MSI-X vectors, some times kernel is not able to allocate the requested amount of memory and crash is observed. To overcome this problem, the default value is set to 8. Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Update driver version to 5.04.00-k0Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Update Copyright headerVikas Chaudhary19-19/+19
Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Implementation of ACB configuration during Loopback for ISP8042Nilesh Javali6-9/+203
While loopback diagnostic is in progress, disable the ACB which resets all the active connections to target. Disable ACB would filter out all the DHCP multicast and broadcast packets which otherwise cause the diagnostic test to take longer time to complete or failures in some other cases. Signed-off-by: Nilesh Javali <[email protected]> Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] qla4xxx: Added support for ISP8042Vikas Chaudhary9-79/+100
Signed-off-by: Vikas Chaudhary <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] mpt2sas: Bump driver version to v16.100.00.00Sreekanth Reddy1-2/+2
Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: James Bottomley <[email protected]>
2013-09-03[SCSI] mpt2sas: Fix for kernel panic when driver loads with HBA connected to ↵Sreekanth Reddy1-0/+14
non LUN 0 configured expander With some enclosures when LUN 0 is not created but LUN 1 or LUN X is created then SCSI scan procedure calls target_alloc, slave_alloc call back functions for LUN 0 and slave_destory() for same LUN 0. In these kind of cases within slave_destroy, pointer to scsi_target in _sas_device structure is set to NULL, following which when slave_alloc for LUN 1 is called then starget would not be set properly for this LUN. So, scsi_target pointer pointing to NULL value would lead to a crash later in the discovery procedure. To solve this issue set the sas_device's scsi_target pointer to scsi_device's scsi_target if it is NULL earlier in slave_alloc callback function. Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: James Bottomley <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.