aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-08-31ext4: remove i_mutex lock in ext4_evict_inode to fix lockdep complainingJiaying Zhang3-4/+18
The i_mutex lock and flush_completed_IO() added by commit 2581fdc810 in ext4_evict_inode() causes lockdep complaining about potential deadlock in several places. In most/all of these LOCKDEP complaints it looks like it's a false positive, since many of the potential circular locking cases can't take place by the time the ext4_evict_inode() is called; but since at the very least it may mask real problems, we need to address this. This change removes the flush_completed_IO() and i_mutex lock in ext4_evict_inode(). Instead, we take a different approach to resolve the software lockup that commit 2581fdc810 intends to fix. Rather than having ext4-dio-unwritten thread wait for grabing the i_mutex lock of an inode, we use mutex_trylock() instead, and simply requeue the work item if we fail to grab the inode's i_mutex lock. This should speed up work queue processing in general and also prevents the following deadlock scenario: During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Signed-off-by: Jiaying Zhang <[email protected]> Signed-off-by: "Theodore Ts'o" <[email protected]>
2011-08-31x86, perf: Check that current->mm is alive before getting user callchainAndrey Vagin1-0/+3
An event may occur when an mm is already released. I added an event in dequeue_entity() and caught a panic with the following backtrace: [ 434.421110] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 434.421258] IP: [<ffffffff810464ac>] __get_user_pages_fast+0x9c/0x120 ... [ 434.421258] Call Trace: [ 434.421258] [<ffffffff8101ae81>] copy_from_user_nmi+0x51/0xf0 [ 434.421258] [<ffffffff8109a0d5>] ? sched_clock_local+0x25/0x90 [ 434.421258] [<ffffffff8101b048>] perf_callchain_user+0x128/0x170 [ 434.421258] [<ffffffff811154cd>] ? __perf_event_header__init_id+0xed/0x100 [ 434.421258] [<ffffffff81116690>] perf_prepare_sample+0x200/0x280 [ 434.421258] [<ffffffff81118da8>] __perf_event_overflow+0x1b8/0x290 [ 434.421258] [<ffffffff81065240>] ? tg_shares_up+0x0/0x670 [ 434.421258] [<ffffffff8104fe1a>] ? walk_tg_tree+0x6a/0xb0 [ 434.421258] [<ffffffff81118f44>] perf_swevent_overflow+0xc4/0xf0 [ 434.421258] [<ffffffff81119150>] do_perf_sw_event+0x1e0/0x250 [ 434.421258] [<ffffffff81119204>] perf_tp_event+0x44/0x70 [ 434.421258] [<ffffffff8105701f>] ftrace_profile_sched_block+0xdf/0x110 [ 434.421258] [<ffffffff8106121d>] dequeue_entity+0x2ad/0x2d0 [ 434.421258] [<ffffffff810614ec>] dequeue_task_fair+0x1c/0x60 [ 434.421258] [<ffffffff8105818a>] dequeue_task+0x9a/0xb0 [ 434.421258] [<ffffffff810581e2>] deactivate_task+0x42/0xe0 [ 434.421258] [<ffffffff814bc019>] thread_return+0x191/0x808 [ 434.421258] [<ffffffff81098a44>] ? switch_task_namespaces+0x24/0x60 [ 434.421258] [<ffffffff8106f4c4>] do_exit+0x464/0x910 [ 434.421258] [<ffffffff8106f9c8>] do_group_exit+0x58/0xd0 [ 434.421258] [<ffffffff8106fa57>] sys_exit_group+0x17/0x20 [ 434.421258] [<ffffffff8100b202>] system_call_fastpath+0x16/0x1b Signed-off-by: Andrey Vagin <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-08-31perf_event: Fix broken calc_timer_values()Eric B Munson1-2/+2
We detected a serious issue with PERF_SAMPLE_READ and timing information when events were being multiplexing. Samples would have time_running > time_enabled. That was easy to reproduce with a libpfm4 example (ran 3 times to cause multiplexing on Core 2): $ syst_smpl -e uops_retired:freq=1 & $ syst_smpl -e uops_retired:freq=1 & $ syst_smpl -e uops_retired:freq=1 & IIP:0x0000000040062d ... PERIOD:2355332948 ENA=40144625315 RUN=60014875184 syst_smpl: WARNING: time_running > time_enabled 63277537998 uops_retired:freq=1 , scaled The bug was not present in kernel up to (and including) 3.0. It turns out the bug was introduced by the following commit: commit c4794295917ebeda8013b6cb9c8d71ab4f74a1fa events: Move lockless timer calculation into helper function The parameters of the function got reversed yet the call sites were not updated to reflect the change. That lead to time_running and time_enabled being swapped. That had no effect when there was no multiplexing because in that case time_running = time_enabled but it would show up in any other scenario. Signed-off-by: Stephane Eranian <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20110829124112.GA4828@quad Signed-off-by: Ingo Molnar <[email protected]>
2011-08-31drm/radeon/kms: set a default max_pixel_clockDave Airlie1-0/+3
On some Power rv100 cards, we have no ATY OF table, but we have no combios table either, and hence we refuse all modes on VGA-0 since we end up with a 0 max pixel clock. Signed-off-by: Dave Airlie <[email protected]> Cc: [email protected] Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Jerome Glisse <[email protected]>
2011-08-31md/raid5: fix a hang on device failure.NeilBrown1-1/+1
Waiting for a 'blocked' rdev to become unblocked in the raid5d thread cannot work with internal metadata as it is the raid5d thread which will clear the blocked flag. This wasn't a problem in 3.0 and earlier as we only set the blocked flag when external metadata was used then. However we now set it always, so we need to be more careful. Signed-off-by: NeilBrown <[email protected]>
2011-08-30powerpc/p1023rds: Fix the error of bank-width of nor flashChunhe Lan1-1/+1
In the p1023rds, a physical bus of nor flash is 16 bits width. The bank-width is width (in bytes) of the bus width. So, the value of bank-width of nor flash is not one, and it should be two. Signed-off-by: Chunhe Lan <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-08-30powerpc/85xx: enable caam crypto driver by defaultKim Phillips3-1/+6
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-08-30powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi2-0/+2
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <[email protected]> Signed-off-by: Kumar Gala <[email protected]>
2011-08-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-2/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Only Panther cheetah+ chips have POPC.
2011-08-30Merge branch 'drm-fixes' of ↵Linus Torvalds4-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add s/r quirk for Compaq Presario V5245EU drm/radeon/kms: evergreen & ni reset SPI block on CP resume drm: Fix the number of connector and encoder to cleanup functions
2011-08-30bitops: Move find_next_bit.o from lib-y to obj-yGeert Uytterhoeven1-2/+2
If there are no builtin users of find_next_bit_le() and find_next_zero_bit_le(), these functions are not present in the kernel image, causing m68k allmodconfig to fail with: ERROR: "find_next_zero_bit_le" [fs/ufs/ufs.ko] undefined! ERROR: "find_next_bit_le" [fs/udf/udf.ko] undefined! ... This started to happen after commit 171d809df189 ("m68k: merge mmu and non-mmu bitops.h"), as m68k had its own inline versions before. commit 63e424c84429 ("arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT, BIT_LE, LAST_BIT}") added find_last_bit.o to obj-y (so it's always included), but find_next_bit.o to lib-y (so it gets removed by the linker if there are no builtin users). Signed-off-by: Geert Uytterhoeven <[email protected]> Cc: Akinobu Mita <[email protected]> Cc: Greg Ungerer <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-30KVM: Fix instruction size issue in pvclock scalingDuncan Sands1-1/+1
Commit de2d1a524e94 ("KVM: Fix register corruption in pvclock_scale_delta") introduced a mul instruction that may have only a memory operand; the assembler therefore cannot select the correct size: pvclock.s:229: Error: no instruction mnemonic suffix given and no register operands; can't size instruction In this example the assembler is: #APP mul -48(%rbp) ; shrd $32, %rdx, %rax #NO_APP A simple solution is to use mulq. Signed-off-by: Duncan Sands <[email protected]> Signed-off-by: Avi Kivity <[email protected]>
2011-08-30drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher1-0/+8
Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-08-30drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse2-0/+2
For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <[email protected] Reviewed-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-08-30md: fix clearing of 'blocked' flag in the presence of bad blocks.NeilBrown1-1/+1
When the 'blocked' flag on a device is cleared while there are unacknowledged bad blocks we must fail the device. This is needed for backwards compatability of the interface. The code currently uses the wrong test for "unacknowledged bad blocks exist". Change it to the right test. Signed-off-by: NeilBrown <[email protected]>
2011-08-29sparc64: Only Panther cheetah+ chips have POPC.David S. Miller1-2/+8
Signed-off-by: David S. Miller <[email protected]>
2011-08-29Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds22-50/+114
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pm: avoid writing the auxillary control register for ARMv7 ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness ARM: pm: arm920/926: fix number of registers saved ARM: pm: CPU specific code should not overwrite r1 (v:p offset) ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU ARM: 7065/1: kexec: ensure new kernel is entered in ARM state ARM: 7003/1: vexpress: Add clock definition for the SP805. ARM: 7051/1: cpuimx* boards: fix mach-types errors ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation. ARM: 6967/1: ep93xx: ts72xx: fix board model detection ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards ARM: cache: detect VIPT aliasing I-cache on ARMv6 ARM: twd: register clockevents device before enabling PPI ARM: realview: ensure visibility of writes during reset ARM: perf: make name of arm_pmu_type consistent ARM: perf: fix prototype of release_pmu ARM: fix perf build with uclibc toolchains
2011-08-29Merge branch 'fixes' of ↵Linus Torvalds18-14/+45
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: ARM: mach-footbridge: add missing header file <video/vga.h> ARM: mach-orion5x: add missing header file <linux/vga.h> arm: fix compile failure in orion5x/dns323-setup.c at91: at91sam9261.c: fix typo in t2_clk alias for atmel_tcb.0 ARM: S5P: fix bug in spdif_clk_get_rate ARM: EXYNOS4: Add restart hook for proper reboot ARM: EXYNOS4: Increase reset delay for USB HOST PHY ARM: S5P: add required chained_irq_enter/exit to gpio-int code ARM: EXYNOS4: add required chained_irq_enter/exit to eint code ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler ARM: S3C64XX: Fix build break in PM debug ARM: S5PV210: Fix build warning ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device ARM: EXYNOS4: remove duplicated inclusion ARM: EXYNOS4: Fix wrong devname to support clkdev ARM: EXYNOS4: Use the correct regulator names on universal_c210 ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set() ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit()
2011-08-29remove remaining references to nfsservctlStephen Rothwell2-2/+2
These were missed in commit f5b940997397 "All Arch: remove linkage for sys_nfsservctl system call" due to them having no sys_ prefix (presumably). Cc: NeilBrown <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stephen Rothwell <[email protected]> Acked-by: James Bottomley <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds39-183/+200
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits) netpoll: fix incorrect access to skb data in __netpoll_rx cassini: init before use in cas_interruptN. can: ti_hecc: Fix uninitialized spinlock in probe can: ti_hecc: Fix unintialized variable net: sh_eth: fix the compile error net/phy: fix DP83865 phy interrupt handler sendmmsg/sendmsg: fix unsafe user pointer access ibmveth: Fix leak when recycling skb and hypervisor returns error arp: fix rcu lockdep splat in arp_process() bridge: fix a possible use after free bridge: Pseudo-header required for the checksum of ICMPv6 mcast: Fix source address selection for multicast listener report MAINTAINERS: Update GIT trees for network development ath9k: Fix PS wrappers in ath9k_set_coverage_class carl9170: Fix mismatch in carl9170_op_set_key mutex lock-unlock wl12xx: add max_sched_scan_ssids value to the hw description wl12xx: Fix validation of pm_runtime_get_sync return value wl12xx: Remove obsolete testmode NVS push command bcma: add uevent to the bus, to autoload drivers ath9k_hw: Fix STA (AR9485) bringup issue due to incorrect MAC address ...
2011-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and timer interrupt sparc: Remove another reference to nfsservctl
2011-08-29Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds9-30/+199
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock support ARM: mach-shmobile: sh7372 MSIOF clock support ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settings ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecter ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCS ARM: mach-shmobile: mackerel: Add USB-DMA ID mmc: sdhi, mmcif: zboot: Correct clock disable logic ARM: mach-shmobile: ag5evm: SDHI requires waiting for idle ARM: static should be at beginning of declaration ARM: mach-shmobile: Use CMT2 for timer on sh7372 ARM: mach-shmobile: sh7372: Add USB-DMAC support
2011-08-29Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds7-15/+135
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: sh: fix the compile error in setup-sh7757.c serial: sh-sci: report CTS as active for get_mctrl sh: Add unaligned memory access for PC relative intructions sh: Fix unaligned memory access for branches without delay slots sh: Fix up fallout from cpuidle changes. serial: sh-sci: console Runtime PM support sh: Fix conflicting definitions of ptrace_triggered serial: sh-sci: fix DMA build by including dma-mapping.h serial: sh-sci: Fix up default regtype probing. sh: intc: enable both edges GPIO interrupts on sh7372 shwdt: fix usage of mod_timer clocksource: sh_cmt: wait for CMCNT on init V2
2011-08-29MAINTAINERS: change framebuffer maintainerFlorian Tobias Schandinat1-2/+2
As Paul has not much time for it I take over maintaining the framebuffer subsystem. Signed-off-by: Florian Tobias Schandinat <[email protected]> Acked-by: Paul Mundt <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-29sparc32,sun4d: Change IPI IRQ level to prevent collision between IPI and ↵Kjetil Oftedal1-1/+1
timer interrupt On Sun4d systems running in SMP mode, IRQ 14 is used for timer interrupts and has a specialized interrupt handler. IPI is currently set to use IRQ 14 as well, which causes it to trigger the timer interrupt handler, and not the IPI interrupt handler. The IPI interrupt is therefore changed to IRQ 13, which is the highest normally handled interrupt. This IRQ is also used for SBUS interrupts, however there is nothing in the IPI/SBUS interrupt handlers that indicate that they will not handle sharing the interrupt. (IRQ 13 is indicated as audio interrupt, which is unlikely to be found in a sun4d system) Signed-off-by: Kjetil Oftedal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-29sparc: Remove another reference to nfsservctlStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-29drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim1-0/+2
It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-08-29perf events: Fix slow and broken cgroup context switch codeStephane Eranian3-20/+69
The current cgroup context switch code was incorrect leading to bogus counts. Furthermore, as soon as there was an active cgroup event on a CPU, the context switch cost on that CPU would increase by a significant amount as demonstrated by a simple ping/pong example: $ ./pong Both processes pinned to CPU1, running for 10s 10684.51 ctxsw/s Now start a cgroup perf stat: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100 $ ./pong Both processes pinned to CPU1, running for 10s 6674.61 ctxsw/s That's a 37% penalty. Note that pong is not even in the monitored cgroup. The results shown by perf stat are bogus: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 100 Performance counter stats for 'sleep 100': CPU1 <not counted> cycles test CPU1 16,984,189,138 cycles # 0.000 GHz The second 'cycles' event should report a count @ CPU clock (here 2.4GHz) as it is counting across all cgroups. The patch below fixes the bogus accounting and bypasses any cgroup switches in case the outgoing and incoming tasks are in the same cgroup. With this patch the same test now yields: $ ./pong Both processes pinned to CPU1, running for 10s 10775.30 ctxsw/s Start perf stat with cgroup: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Run pong outside the cgroup: $ /pong Both processes pinned to CPU1, running for 10s 10687.80 ctxsw/s The penalty is now less than 2%. And the results for perf stat are correct: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Performance counter stats for 'sleep 10': CPU1 <not counted> cycles test # 0.000 GHz CPU1 23,933,981,448 cycles # 0.000 GHz Now perf stat reports the correct counts for for the non cgroup event. If we run pong inside the cgroup, then we also get the correct counts: $ perf stat -e cycles,cycles -A -a -G test -C 1 -- sleep 10 Performance counter stats for 'sleep 10': CPU1 22,297,726,205 cycles test # 0.000 GHz CPU1 23,933,981,448 cycles # 0.000 GHz 10.001457237 seconds time elapsed Signed-off-by: Stephane Eranian <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20110825135803.GA4697@quad Signed-off-by: Ingo Molnar <[email protected]>
2011-08-29sched: Fix a memory leak in __sdt_free()WANG Cong1-0/+1
This patch fixes the following memory leak: unreferenced object 0xffff880107266800 (size 512): comm "sched-powersave", pid 3718, jiffies 4323097853 (age 27495.450s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81133940>] create_object+0x187/0x28b [<ffffffff814ac103>] kmemleak_alloc+0x73/0x98 [<ffffffff811232ba>] __kmalloc_node+0x104/0x159 [<ffffffff81044b98>] kzalloc_node.clone.97+0x15/0x17 [<ffffffff8104cb90>] build_sched_domains+0xb7/0x7f3 [<ffffffff8104d4df>] partition_sched_domains+0x1db/0x24a [<ffffffff8109ee4a>] do_rebuild_sched_domains+0x3b/0x47 [<ffffffff810a00c7>] rebuild_sched_domains+0x10/0x12 [<ffffffff8104d5ba>] sched_power_savings_store+0x6c/0x7b [<ffffffff8104d5df>] sched_mc_power_savings_store+0x16/0x18 [<ffffffff8131322c>] sysdev_class_store+0x20/0x22 [<ffffffff81193876>] sysfs_write_file+0x108/0x144 [<ffffffff81135b10>] vfs_write+0xaf/0x102 [<ffffffff81135d23>] sys_write+0x4d/0x74 [<ffffffff814c8a42>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: WANG Cong <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: [email protected] # 3.0 Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-08-29sched: Move blk_schedule_flush_plug() out of __schedule()Thomas Gleixner1-10/+15
There is no real reason to run blk_schedule_flush_plug() with interrupts and preemption disabled. Move it into schedule() and call it when the task is going voluntarily to sleep. There might be false positives when the task is woken between that call and actually scheduling, but that's not really different from being woken immediately after switching away. This fixes a deadlock in the scheduler where the blk_schedule_flush_plug() callchain enables interrupts and thereby allows a wakeup to happen of the task that's going to sleep. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: [email protected] # 2.6.39+ Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-08-29sched: Separate the scheduler entry for preemptionThomas Gleixner1-5/+10
Block-IO and workqueues call into notifier functions from the scheduler core code with interrupts and preemption disabled. These calls should be made before entering the scheduler core. To simplify this, separate the scheduler core code into __schedule(). __schedule() is directly called from the places which set PREEMPT_ACTIVE and from schedule(). This allows us to add the work checks into schedule(), so they are only called when a task voluntary goes to sleep. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: [email protected] # 2.6.39+ Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-08-29ARM: mach-shmobile: sh7372 CMT3 and CMT4 clock supportMagnus Damm1-1/+5
Add clock control support for sh7372 CMT hardware blocks. No upstream sh7372 boards are making use of CMT3 + CMT4, but the sh7372 hardware happens to come out of reset with all CMT MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29ARM: mach-shmobile: sh7372 MSIOF clock supportMagnus Damm1-3/+9
Add clock control support for sh7372 MSIOF hardware blocks. No upstream sh7372 boards are making use of MSIOF0->2, but the sh7372 hardware happens to come out of reset with all MSIOF MSTP clocks _enabled_, so to save power we need to implement a fix in software to shut down unused clocks. This patch relies on the recently merged 794d78f drivers: sh: late disabling of clocks V2 to make sure the unused clocks get disabled as expected. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29ARM: mach-shmobile: clock-sh7372: fixup USB-DMAC1 settingsKuninori Morimoto1-2/+4
USB-DMAC1 needs SMSTPCR4/MSTP407 controls, not MSTP214 this patch tested on mackerel board Reported-by: Magnus Damm <[email protected]> Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29ARM: mach-shmobile: clock-sh73a0: tidyup CKSCR main clock selecterKuninori Morimoto1-1/+1
MAINCKSEL is [29:28], not [27:24] Signed-off-by: Kuninori Morimoto <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29ARM: mach-shmobile: Remove 3DG/SGX from sh7372 INTCSMagnus Damm1-4/+3
This patch removes support for the SGX interrupt source in the sh7372 INTCS controller. The SGX hardware block included in sh7372 is already hooked up to the ARM Cortex-A8 core using the INTCA controller, so SGX users are encouraged to make use of that interrupt source instead. Removing support for the SGX interrupt source in INTCS simplifies the sh7372 power management code by allowing us to assume that only INTCA needs to be powered on to operate the SGX hardware. If the INTCS interrupt source would be kept then the kernel would be forced to deal with additional dependencies that does not follow the regular power domain hiearachy. With this patch in place we can safely power down INTCS while the SGX is operating. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29Merge branch 'rmobile/dma' into rmobile-fixes-for-linusPaul Mundt3-1/+154
2011-08-29sh: fix the compile error in setup-sh7757.cYoshihiro Shimoda1-0/+1
Fix the following build errors: CC arch/sh/kernel/cpu/sh4a/setup-sh7757.o arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: implicit declaration of function ‘DMA_BIT_MASK’ arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: initializer element is not constant arch/sh/kernel/cpu/sh4a/setup-sh7757.c:681: error: (near initialization for ‘usb_ehci_device.dev.coherent_dma_mask’) arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: initializer element is not constant arch/sh/kernel/cpu/sh4a/setup-sh7757.c:705: error: (near initialization for ‘usb_ohci_device.dev.coherent_dma_mask’) make[3]: *** [arch/sh/kernel/cpu/sh4a/setup-sh7757.o] Error 1 Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29serial: sh-sci: report CTS as active for get_mctrlYoshii Takashi1-1/+1
sh-sci.c sets hardware up and then let the HW do all flow controls. There is no software code, nor needs to get/set real CTS signal. But, when turning CRTSCTS on through termios, uart_set_termios() in serial_core.c checks CTS, and stops TX if it is inactive at the moment. Because sci_get_mctrl() returns a fixed value DTR|RTS|DSR but CTS, the sequence open -> set CRTSCTS -> write hit the case and stop working, no more outputs. This patch makes sci_get_mctrl() report CTS in addition. Signed-off-by: Takashi YOSHII <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29sh: Add unaligned memory access for PC relative intructionsPhil Edworthy1-0/+35
This adds unaligned memory access support for the following instructions: mov.w @(disp,PC),Rn mov.l @(disp,PC),Rn These instructions are often used on SH2A toolchains. Signed-off-by: Phil Edworthy <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-29sh: Fix unaligned memory access for branches without delay slotsPhil Edworthy1-0/+2
This patch just clears the return code for those cases where an unaligned memory access occurs on branch instructions without a delay slot. Signed-off-by: Phil Edworthy <[email protected]> Signed-off-by: Paul Mundt <[email protected]>
2011-08-28Linux 3.1-rc4Linus Torvalds1-1/+1
2011-08-28mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.hShawn Guo1-0/+1
There are the following warnings and errorx when compiling the driver. The patch adds the missing inclusion of linux/module.h to fix them. drivers/mmc/host/sdhci-esdhc-imx.c:563:12: error: ‘THIS_MODULE’ undeclared here (not in a function) [..] Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-08-28Merge branch 'pm-fixes' of ↵Linus Torvalds7-21/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ARM: mach-shmobile: sh7372 LCDC1 suspend fix V2 (incremental) OMAP: omap_device: only override _noirq methods, not normal suspend/resume PM / Runtime: Correct documentation of pm_runtime_irq_safe() ARM: mach-shmobile: sh7372 LCDC1 suspend fix sh-sci / PM: Use power.irq_safe PM: Use spinlock instead of mutex in clock management functions
2011-08-28ARM: pm: avoid writing the auxillary control register for ARMv7Russell King1-1/+3
For ARMv7 kernels running in the non-secure world, writing to the auxillary control register causes an abort, so we must avoid directly writing the auxillary control register. If the ACR has already been reinitialized by SoC code, don't try to restore it. Signed-off-by: Russell King <[email protected]>
2011-08-28ARM: pm: some ARMv7 requires a dsb in resume to ensure correctnessRussell King1-0/+1
Add a dsb after the isb to ensure that the previous writes to the CP15 registers take effect before we enable the MMU. Signed-off-by: Russell King <[email protected]>
2011-08-28ARM: pm: arm920/926: fix number of registers savedRussell King2-2/+2
ARM920 and ARM926 save four registers, not three. Fix the size of the suspend region required. Signed-off-by: Russell King <[email protected]>
2011-08-28ARM: pm: CPU specific code should not overwrite r1 (v:p offset)Russell King2-8/+8
r1 stores the v:p offset from the CPU invariant resume code, and is expected to be preserved by the CPU specific code. Overwriting it is not a good idea. We've managed to get away with it on sa1100 platforms because most happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the case depending on kernel configuration. So fix this latent bug. This fixes xsc3 as well which was saving and restoring this register independently. Signed-off-by: Russell King <[email protected]>
2011-08-28ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMUWill Deacon1-0/+1
cpu_v7_reset disables the MMU and then branches to the provided address. On Thumb-2 kernels, we should take care to clear the Thumb Exception enable bit in the System Control Register, otherwise this may wreak havok in the code to which we are branching (for example, an ARM kernel image via kexec). Reviewed-by: Dave Martin <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-08-28ARM: 7065/1: kexec: ensure new kernel is entered in ARM stateWill Deacon1-1/+2
Commit 540b5738 ("ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state") mandates that the kernel should be entered in ARM state. If a Thumb-2 kernel kexecs a new kernel image, we need to ensure that we change state when branching to the new code. This patch replaces a mov pc, lr with a bx lr on Thumb-2 kernels so that we transition to ARM state if need be. Reviewed-by: Dave Martin <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.