| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We assumed that for all modern GENs the PTEs and register space are
split in the GTTMMADR BAR, but while it is true, we should rather use
fixed offset as it is defined in the specification.
Bspec: 4409, 4457, 4604, 11181, 9027, 13246, 13321, 44980
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: CQ Tang <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
For the brave new world of bridges not creating their own connectors, we
need to implement the max clock limitation via bridge->mode_valid()
instead of connector->mode_valid().
v2: Drop unneeded connector->mode_valid()
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
While sanitizing the hardware state we're currently forcing
the pipe bottom color legacy csc/gamma bits on. That is not a
good idea as BIOSen are likely to leave gabage in the LUTs and
so doing this causes ugly visual glitches if and when the
planes covering the background get disabled. This was exactly
the case on this Dell Precision 5560 tgl laptop.
On icl+ we don't normally even use these legacy bits
anymore and instead use their GAMMA_MODE counterparts.
On earlier platforms the bits are used, but we still
shouldn't force them on without knowing what's in the LUT.
So two options, get rid of the whole thing, or do what
intel_color_commit() does to make sure the bottom color state
matches whatever out hardware readout produced. I chose the
latter since it'll match what happens on older platforms when
the primary plane gets turned off. In fact let's just call
intel_color_commit(). It'll also do some CSC programming but
since we don't have readout for that it'll actually just set
to all zeros. So in the unlikely case of CSC actually being
enabld by the BIOS we'll end up with all black until the first
atomic commit happens.
Still not totally sure what we should do about color management
features here in general. Probably the safest thing would be to
force everything off exactly at the same time when we disable
the primary plane as there is no guarantees that whatever the
LUTs/CSCs contain make any sense whatsoever without the
specific pixel data in the BIOS fb. And if we preserve the
primary plane then we should disable the color management
features exactly when the primary plane fb contents first
changes since the new content assumes more or less no
transformations. But of course synchronizing front buffer
rendering with anything else is a bit hard...
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3534
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Uma Shankar <[email protected]>
|
|
The previous commits do exactly what this entry in the TODO file asks
for, thus we can remove it now as it is no longer applicable.
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Functions drm_modeset_lock_all() and drm_modeset_unlock_all() are no
longer used anywhere and can be removed.
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
part 2
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
While the previous commit was a simple "search and replace", this time I
had to do a bit of refactoring as only one call to
DRM_MODESET_LOCK_ALL_BEGIN() is allowed inside one same function.
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace driver calls to
drm_modeset_lock_all() with DRM_MODESET_LOCK_ALL_BEGIN() and
DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As requested in Documentation/gpu/todo.rst, replace the boilerplate code
surrounding drm_modeset_lock_all_ctx() with DRM_MODESET_LOCK_ALL_BEGIN()
and DRM_MODESET_LOCK_ALL_END()
Signed-off-by: Fernando Ramos <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This can be used to create a separate DRM file description, thus
creating a new GEM handle namespace.
My use-case is wlroots. The library splits responsibilities between
separate components: the GBM allocator creates buffers, the GLES2
renderer uses EGL to import them and render to them, the DRM
backend imports the buffers and displays them. wlroots has a
modular architecture, and any of these components can be swapped
and replaced with something else. For instance, the pipeline can
be set up so that the DRM dumb buffer allocator is used instead of
GBM and the Pixman renderer is used instead of GLES2. Library users
can also replace any of these components with their own custom one.
DMA-BUFs are used to pass buffer references across components. We
could use GEM handles instead, but this would result in pain if
multiple GPUs are in use: wlroots copies buffers across GPUs as
needed. Importing a GEM handle created on one GPU into a completely
different GPU will blow up (fail at best, mix unrelated buffers
otherwise).
Everything is fine if all components use Mesa. However, this isn't
always desirable. For instance when running with DRM dumb buffers
and the Pixman software renderer it's unfortunate to depend on GBM
in the DRM backend just to turn DMA-BUFs into FB IDs. GBM loads
Mesa drivers to perform an action which has nothing driver-specific.
Additionally, drivers will fail the import if the 3D engine can't
use the imported buffer, for instance amdgpu will refuse to import
DRM dumb buffers [1]. We might also want to be running with a Vulkan
renderer and a Vulkan allocator in the future, and GBM wouldn't be
welcome in this setup.
To address this, GBM can be side-stepped in the DRM backend, and
can be replaced with drmPrimeFDToHandle calls. However because of
GEM handle reference counting issues, care must be taken to avoid
double-closing the same GEM handle. In particular, it's not
possible to share a DRM FD with GBM or EGL and perform some
drmPrimeFDToHandle calls manually.
So wlroots needs to re-open the DRM FD to create a new GEM handle
namespace. However there's no guarantee that the file-system
permissions will be set up so that the primary FD can be opened
by the compsoitor. On modern systems seatd or logind is a privileged
process responsible for doing this, and other processes aren't
expected to do it. For historical reasons systemd still allows
physically logged in users to open primary DRM nodes, but this
doesn't work on non-systemd setups and it's desirable to lock
them down at some point.
Some might suggest to open the render node instead of re-opening
the primary node. However some systems don't have a render node
at all (e.g. no GPU, or a split render/display SoC).
Solutions to this issue have been discussed in [2]. One solution
would be to open the magic /proc/self/fd/<fd> file, but it's a
Linux-specific hack (wlroots supports BSDs too). Another solution
is to add support for re-opening a DRM primary node to seatd/logind,
but they don't support it now and really haven't been designed for
this (logind would need to grow a completely new API, because it
assumes unique dev_t IDs). Also this seems like pushing down a
kernel limitation to user-space a bit too hard.
Another solution is to allow creating empty DRM leases. The lessee
FD would have its own GEM handle namespace, so wouldn't conflict
wth GBM/EGL. It would have the master bit set, but would be able
to manage zero resources. wlroots doesn't intend to share this FD
with any other process.
All in all IMHO that seems like a pretty reasonable solution to the
issue at hand.
Note, I've discussed with Jonas Ådahl and Mutter plans to adopt a
similar design in the future.
Example usage in wlroots is available at [3]. IGT test available
at [4].
[1]: https://github.com/swaywm/wlroots/issues/2916
[2]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[3]: https://github.com/swaywm/wlroots/pull/3158
[4]: https://patchwork.freedesktop.org/series/94323/
Signed-off-by: Simon Ser <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Daniel Stone <[email protected]>
Cc: Pekka Paalanen <[email protected]>
Cc: Michel Dänzer <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Keith Packard <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Dave Airlie <[email protected]>
Acked-by: Pekka Paalanen <[email protected]>
Reviewed-by: Daniel Stone <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Check for the zero length front porch already in intel_mode_valid()
so that we get the same validation for both get_modes() and setcrtc()/etc.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|
|
"CRTC fixup failed" is probably leftovers from pre-atomic days
when there was an actual fixup() function. Let's unify the debug
messages between encoder vs. crtc compute_config() calls.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|
|
Unify how we check for -EDEADLK vs. other errors from
crtc vs. encoder compute_config() calls.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
|
|
We may end up in i915_ttm_bo_destroy() in an error path before the
object is fully initialized. In that case it's not correct to call
__i915_gem_free_object(), because that function
a) Assumes the gem object refcount is 0, which it isn't.
b) frees the placements which are owned by the caller until the
init_object() region ops returns successfully. Fix this by providing
a lightweight cleanup function __i915_gem_object_fini() which is also
called by __i915_gem_free_object().
While doing this, also make sure we call dma_resv_fini() as part of
ordinary object destruction and not from the RCU callback that frees
the object. This will help track down bugs where the object is incorrectly
locked from an RCU lookup.
Finally, make sure the object isn't put on the region list until it's
either locked or fully initialized in order to block list processing of
partially initialized objects.
v2:
- The TTM object backend memory was freed before the gem pages were
put. Separate this functionality into __i915_gem_object_pages_fini()
and call it from the TTM delete_mem_notify() callback.
v3:
- Include i915_gem_object_free_mmaps() in __i915_gem_object_pages_fini()
to make sure we don't inadvertedly introduce a race.
Fixes: 48b096126954 ("drm/i915: Move __i915_gem_free_object to ttm_bo_destroy")
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Matthew Auld <[email protected]> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Prefer the intel_ types. No functional changes.
v2: Fix build.
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Failures to register debugfs should be ignored anyway, so stop
propagating errors altogether for clarity and simplicity. No functional
changes.
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/346562ccef2282ccdbdea54409fab1d2b48f313c.1630327990.git.jani.nikula@intel.com
|
|
The debugfs file shows it's not capable, don't duplicate the info.
Reviewed-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/939453050a5a5175a12a08f16542c1b40bd726dc.1630327990.git.jani.nikula@intel.com
|
|
Prefer i915 over drm pointer.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Using standard -EAGAIN should be perfectly fine instead of using a
special case value.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Avoid using the incidental -EPERM.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/e2f79220ed2558f615c051e2533275a5dae1a04f.1633000838.git.jani.nikula@intel.com
|
|
Avoid using the incidental -EPERM. Return the -EIO directly from
i915_get_bridge_dev() instead of converting return values later.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1ee72c31963d8be98490cd78f7c1182ba4f54c13.1633000838.git.jani.nikula@intel.com
|
|
Avoid using the incidental -EPERM.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8acf7ffe9222d23c7f47dbd95ff1f737221ff72c.1633000838.git.jani.nikula@intel.com
|
|
Avoid using the incidental -EPERM. Also remove useless comment.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/37df1edc6d3745997cec2dfe41520d9f704e14b4.1633000838.git.jani.nikula@intel.com
|
|
Having two functions for this seems like excess duplication and
parameter juggling. Merge them together.
While at it, drop the extra error message, as wait_for_payload_credits()
already prints an error, and switch from incidental -EPERM (i.e. -1) to
actual error codes.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/f74f7462a36e76070db6b4c01616d0eb663b9938.1633000838.git.jani.nikula@intel.com
|
|
Pass a const pointer instead of passing 32 bytes of struct
mipi_dsi_packet by value.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/c67d2fa0d97bf336a321497775b9717d85d44a51.1633000838.git.jani.nikula@intel.com
|
|
Keep the functionality and the assert code together.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/0a5fa9b8d4d4615d4e6503b6bb33541c0bccffbb.1632992608.git.jani.nikula@intel.com
|
|
Keep the functionality and the assert code together.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/0229659fb8af6c91c774408c6f7bb8c4ff8735e3.1632992608.git.jani.nikula@intel.com
|
|
Move assert_panel_unlocked() to intel_pps.c and rename
assert_pps_unlocked(). Keep the functionality and the assert code
together.
There's still a bit of a split between the eDP PPS usage in intel_pps.c
and all the other PPS usage, and assert_pps_unlocked() is arguably more
related to the latter. However, intel_pps.c is the best fit for anything
touching the PPS registers.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/a9b77692a145891789eefb0447e082cfc22aaa85.1632992608.git.jani.nikula@intel.com
|
|
Keep the functionality and the assert code together.
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/427d27eb4e5daca208d496d6c2ffc91ed90ba714.1632992608.git.jani.nikula@intel.com
|
|
With CONFIG_FB=m and CONFIG_DRM=y, we get a link error in the fb helper:
aarch64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_alloc_fbi':
(.text+0x10cc): undefined reference to `framebuffer_alloc'
Tighten the dependency so it is only allowed in the case that DRM can
link against FB.
Fixes: f611b1e7624c ("drm: Avoid circular dependencies for CONFIG_FB")
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Daniel pointed me towards this function and there are multiple obvious problems
in the implementation.
First of all the retry loop is not working as intended. In general the retry
makes only sense if you grab the reference first and then check the sequence
values.
Then we should always also wait for the exclusive fence.
It's also good practice to keep the reference around when installing callbacks
to fences you don't own.
And last the whole implementation was unnecessary complex and rather hard to
understand which could lead to probably unexpected behavior of the IOCTL.
Fix all this by reworking the implementation from scratch. Dropping the
whole RCU approach and taking the lock instead.
Only mildly tested and needs a thoughtful review of the code.
Pushing through drm-misc-next to avoid merge conflicts and give the code
another round of testing.
v2: fix the reference counting as well
v3: keep the excl fence handling as is for stable
v4: back to testing all fences, drop RCU
v5: handle in and out separately
v6: add missing clear of events
v7: change coding style as suggested by Michel, drop unused variables
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Tested-by: Michel Dänzer <[email protected]>
CC: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With all the past fixes now this feature is functional and can be
enabled by default in desktop enviroments that uses compositor.
Cc: Gwan-gyeong Mun <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Reviewed-by: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With all the recent fixes PSR2 is properly working in Alderlake-P but
due to some issues that don't have software workarounds it will not be
supported in display steppings older than B0.
Even with this patch PSR2 will no be enabled by default in ADL-P, it
still requires enable_psr2_sel_fetch to be set to true, what some
of our tests does.
Cc: Gwan-gyeong Mun <[email protected]>
Reviewed-by: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Wa_14014971508 is required to fix scanout when a feature that i915
do not support is enabled and this feature is not planned to be enabled
for adlp.
Keeping this workaround enabled can badly hurt power-savings when
a full frame fetch is required(see psr2_sel_fetch_plane_state_supported()
and psr2_sel_fetch_pipe_state_supported()).
Here a example that could badly hurt power-savings, userspace does
a page flip to a rotated plane, so CONTINUOS_FULL_FRAME set.
But then for a whole 30 seconds nothing in the screen requires updates
but because CONTINUOS_FULL_FRAME is set, it will not go into DC5/DC6.
Reverting Wa_14014971508 fixes that, as only a single frame will be
sent and then display can go to DC5/DC6 for those 30 seconds of
idleness.
BSpec: 54369
Cc: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Gwan-gyeong Mun <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
enabled
Legacy cursor APIs are handled by intel_legacy_cursor_update(), that
calls drm_atomic_helper_update_plane() when going through the
slow/atomic path to update cursor, what was the case for PSR2
selective fetch.
drm_atomic_helper_update_plane() sets
drm_atomic_state->legacy_cursor_update to true when updating the
cursor plane, to allow several cursor updates to happen within the
same frame, as userspace does that.
If drivers waited for a vblank increment at the end of every cursor
movement that would cause a visible lag in the cursor.
But this optimization do not properly work with PSR2 selective fetch
dirt area calculation, for example if within a single frame the cursor
had 3 moves the final dirt area programmed to PSR2_MAN_TRK_CTL would
be based in the second movement as old state and third movement as new
state, not updating the area where cursor was in the first state.
So here switching back to the fast path approach in
intel_legacy_cursor_update() and handling cursor movements as
frontbuffer rendering(psr_force_hw_tracking_exit()), that is not the
most optimal for power-savings but is the solution that we have until
mailbox style updates is implemented.
Also removing the cursor workaround as not it is properly undestand
the issue and is know that it will never cover all the cases.
Cc: Ville Syrjälä <[email protected]>
Cc: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Acked-by: Ville Syrjälä <[email protected]>
Reviewed-by: Gwan-gyeong Mun <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
enabled
When PSR2 selective fetch is enabled writes to CURSURFLIVE alone do
not causes the panel to be updated when doing frontbuffer rendering.
From what I was able to figure from experiments the writes to
CURSURFLIVE takes PSR2 from deep sleep but panel is not updated
because PSR2_MAN_TRK_CTL has no start and end region set.
As we don't have the dirt area from current flush and invalidate API
and even if we did userspace could do several draws to frontbuffer and
we would need a way to append all the damaged areas of all the draws
that need to be part of next frame.
So here only programing PSR2_MAN_TRK_CTL to do a single full frame
fetch.
It is a safe approach as if scanout is in the visible area
the single full frame will only be visible for hardware in the next
frame because of the double buffering, and if scanout is in vblank
area it will be draw in the current frame.
No need to disable PSR and wait a few miliseconds to enable it again.
Cc: Gwan-gyeong Mun <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Gwan-gyeong Mun <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This unnecessary flushes are hurting power-savings are it causes
features like PSR, FBC and DRRS to disable it self to handle
frontbuffer rendering, below some explanation of why each removed
call is not necessary.
The flush in intel_prepare_plane_fb() is not required as framebuffer
will be flipped and power-saving features do the proper flip handling
in hardware.
intel_find_initial_plane_obj() flush is not required because it is
only executed during driver load and at this point the power-saving
features are not even enabled.
And the last one intelfb_create(), is also not required as at this
point the fbdev was just allocated, userspace will draw on
it what will trigger frontbuffer invalidates and flushes later on.
Cc: Ville Syrjälä <[email protected]>
Cc: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We are still missing the PSR2 selective fetch handling of multi-planar
formats but until proper handle is added we can workaround it by
doing full frames fetch when state has such formats.
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Gwan-gyeong Mun <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: José Roberto de Souza <[email protected]>
|
|
PSR2 selective is not supported over rotated and scaled planes.
We had the rotation check in intel_psr2_sel_fetch_config_valid()
but that code path is only execute when a modeset is needed and
those plane parameters can change without a modeset.
Pipe selective fetch restrictions are also needed, it could be added
in intel_psr_compute_config() but pippe scaling is computed after
it is executed, so leaving as is for now.
There is no much loss in this approach as it would cause selective
fetch to not enabled as for alderlake-P and newer will cause it to
switch to PSR1 that will have the same power-savings as do full pipe
fetch.
Also need to check those restricions in the second
for_each_oldnew_intel_plane_in_state() loop because the state could
only have a plane that is not affected by those restricitons but
the damaged area intersect with planes that has those restrictions,
so a full pipe fetch is required.
v2:
- also handling pipe restrictions
BSpec: 55229
Reviewed-by: Gwan-gyeong Mun <[email protected]> # v1
Cc: Ville Syrjälä <[email protected]>
Cc: Gwan-gyeong Mun <[email protected]>
Signed-off-by: José Roberto de Souza <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|