aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-18brcmfmac: sdio: Don't tune while the card is offDouglas Anderson1-0/+7
When Broadcom SDIO cards are idled they go to sleep and a whole separate subsystem takes over their SDIO communication. This is the Always-On-Subsystem (AOS) and it can't handle tuning requests. Specifically, as tested on rk3288-veyron-minnie (which reports having BCM4354/1 in dmesg), if I force a retune in brcmf_sdio_kso_control() when "on = 1" (aka we're transition from sleep to wake) by whacking: bus->sdiodev->func1->card->host->need_retune = 1 ...then I can often see tuning fail. In this case dw_mmc reports "All phases bad!"). Note that I don't get 100% failure, presumably because sometimes the card itself has already transitioned away from the AOS itself by the time we try to wake it up. If I force retuning when "on = 0" (AKA force retuning right before sending the command to go to sleep) then retuning is always OK. NOTE: we need _both_ this patch and the patch to avoid triggering tuning due to CRC errors in the sleep/wake transition, AKA ("brcmfmac: sdio: Disable auto-tuning around commands expected to fail"). Though both patches handle issues with Broadcom's AOS, the problems are distinct: 1. We want to defer (but not ignore) asynchronous (like timer-requested) tuning requests till the card is awake. However, we want to ignore CRC errors during the transition, we don't want to queue deferred tuning request. 2. You could imagine that the AOS could implement retuning but we could still get errors while transitioning in and out of the AOS. Similarly you could imagine a seamless transition into and out of the AOS (with no CRC errors) even if the AOS couldn't handle tuning. ALSO NOTE: presumably there is never a desperate need to retune in order to wake up the card, since doing so is impossible. Luckily the only way the card can get into sleep state is if we had a good enough tuning to send it the command to put it into sleep, so presumably that "good enough" tuning is enough to wake us up, at least with a few retries. Cc: [email protected] #v4.18+ Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Adrian Hunter <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-06-18mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()Douglas Anderson2-0/+43
We want SDIO drivers to be able to temporarily stop retuning when the driver knows that the SDIO card is not in a state where retuning will work (maybe because the card is asleep). We'll move the relevant functions to a place where drivers can call them. Cc: [email protected] #v4.18+ Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Adrian Hunter <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-06-18brcmfmac: sdio: Disable auto-tuning around commands expected to failDouglas Anderson1-0/+4
There are certain cases, notably when transitioning between sleep and active state, when Broadcom SDIO WiFi cards will produce errors on the SDIO bus. This is evident from the source code where you can see that we try commands in a loop until we either get success or we've tried too many times. The comment in the code reinforces this by saying "just one write attempt may fail" Unfortunately these failures sometimes end up causing an "-EILSEQ" back to the core which triggers a retuning of the SDIO card and that blocks all traffic to the card until it's done. Let's disable retuning around the commands we expect might fail. Cc: [email protected] #v4.18+ Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Adrian Hunter <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-06-18mmc: core: API to temporarily disable retuning for SDIO CRC errorsDouglas Anderson4-2/+44
Normally when the MMC core sees an "-EILSEQ" error returned by a host controller then it will trigger a retuning of the card. This is generally a good idea. However, if a command is expected to sometimes cause transfer errors then these transfer errors shouldn't cause a re-tuning. This re-tuning will be a needless waste of time. One example case where a transfer is expected to cause errors is when transitioning between idle (sometimes referred to as "sleep" in Broadcom code) and active state on certain Broadcom WiFi SDIO cards. Specifically if the card was already transitioning between states when the command was sent it could cause an error on the SDIO bus. Let's add an API that the SDIO function drivers can call that will temporarily disable the auto-tuning functionality. Then we can add a call to this in the Broadcom WiFi driver and any other driver that might have similar needs. NOTE: this makes the assumption that the card is already tuned well enough that it's OK to disable the auto-retuning during one of these error-prone situations. Presumably the driver code performing the error-prone transfer knows how to recover / retry from errors. ...and after we can get back to a state where transfers are no longer error-prone then we can enable the auto-retuning again. If we truly find ourselves in a case where the card needs to be retuned sometimes to handle one of these error-prone transfers then we can always try a few transfers first without auto-retuning and then re-try with auto-retuning if the first few fail. Without this change on rk3288-veyron-minnie I periodically see this in the logs of a machine just sitting there idle: dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ Cc: [email protected] #v4.18+ Signed-off-by: Douglas Anderson <[email protected]> Acked-by: Adrian Hunter <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-06-18Revert "brcmfmac: disable command decode in sdio_aos"Douglas Anderson1-5/+1
This reverts commit 29f6589140a10ece8c1d73f58043ea5b3473ab3e. After that patch landed I find that my kernel log on rk3288-veyron-minnie and rk3288-veyron-speedy is filled with: brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110 This seems to happen every time the Broadcom WiFi transitions out of sleep mode. Reverting the commit fixes the problem for me, so that's what this patch does. Note that, in general, the justification in the original commit seemed a little weak. It looked like someone was testing on a SD card controller that would sometimes die if there were CRC errors on the bus. This used to happen back in early days of dw_mmc (the controller on my boards), but we fixed it. Disabling a feature on all boards just because one SD card controller is broken seems bad. Fixes: 29f6589140a1 ("brcmfmac: disable command decode in sdio_aos") Cc: Wright Feng <[email protected]> Cc: Double Lo <[email protected]> Cc: Madhan Mohan R <[email protected]> Cc: Chi-Hsien Lin <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Cc: [email protected] Acked-by: Kalle Valo <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2019-06-18ARM: ixp4xx: include irqs.h where neededArnd Bergmann5-0/+10
Multiple ixp4xx specific files require macros from irqs.h that were moved out from mach/irqs.h, e.g.: arch/arm/mach-ixp4xx/vulcan-pci.c:41:19: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes] arch/arm/mach-ixp4xx/vulcan-pci.c:49:10: error: implicit declaration of function 'IXP4XX_GPIO_IRQ' [-Werror,-Wimplicit-function-declaration] return IXP4XX_GPIO_IRQ(INTA); Include this header in all files that failed to build because of that. Fixes: dc8ef8cd3a05 ("ARM: ixp4xx: Convert to SPARSE_IRQ") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2019-06-18ARM: ixp4xx: mark ixp4xx_irq_setup as __initArnd Bergmann1-4/+4
Kbuild complains about ixp4xx_irq_setup not being __init itself in some configurations: WARNING: vmlinux.o(.text+0x85bae4): Section mismatch in reference from the function ixp4xx_irq_setup() to the function .init.text:set_handle_irq() The function ixp4xx_irq_setup() references the function __init set_handle_irq(). This is often because ixp4xx_irq_setup lacks a __init annotation or the annotation of set_handle_irq is wrong. I suspect it normally gets inlined, so we get no such warning, but clang makes this obvious when the function is left out of line. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2019-06-18ARM: ixp4xx: don't select SERIAL_OF_PLATFORMArnd Bergmann1-1/+0
Platforms should not normally select all the device drivers, leave that up to the user and the defconfig file. In this case, we get a warning for randconfig builds: WARNING: unmet direct dependencies detected for SERIAL_OF_PLATFORM Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && SERIAL_8250 [=n] && OF [=y] Selected by [y]: - MACH_IXP4XX_OF [=y] && ARCH_IXP4XX [=y] Fixes: 9540724ca29d ("ARM: ixp4xx: Add device tree boot support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2019-06-18firmware: trusted_foundations: add ARMv7 dependencyArnd Bergmann1-1/+1
The "+sec" extension is invalid for older ARM architectures, but the code can now be built on any ARM configuration: /tmp/trusted_foundations-2d0882.s: Assembler messages: /tmp/trusted_foundations-2d0882.s:194: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:201: Error: selected processor does not support `smc #0' in ARM mode /tmp/trusted_foundations-2d0882.s:213: Error: architectural extension `sec' is not allowed for the current base architecture /tmp/trusted_foundations-2d0882.s:220: Error: selected processor does not support `smc #0' in ARM mode Add a dependency on ARMv7 for the build. Fixes: 4cb5d9eca143 ("firmware: Move Trusted Foundations support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2019-06-18usb: dwc2: Use generic PHY width in params setupJules Maselbas2-9/+9
Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since it's value will be overwritten by dwc2_init_params(). This change make sure to take in account the generic PHY width information during paraminitialisation, done in dwc2_set_param_phy_utmi_width(). By doing so, the phy_utmi_width params can still be overrided by devicetree specific params and will also be checked against hardware capabilities. Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") Acked-by: Minas Harutyunyan <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Signed-off-by: Jules Maselbas <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2019-06-17RDMA/efa: Fix success return value in case of errorGal Pressman1-6/+18
Existing code would mistakenly return success in case of error instead of a proper return value. Fixes: e9c6c5373088 ("RDMA/efa: Add common command handlers") Reviewed-by: Firas JahJah <[email protected]> Reviewed-by: Yossi Leybovich <[email protected]> Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Handle port down properly in pioMike Marciniszyn4-7/+8
The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Handle wakeup of orphaned QPs for pioMike Marciniszyn1-0/+16
Once a send context is taken down due to a link failure, any QPs waiting for pio credits will stay on the waitlist indefinitely. Fix by wakeing up all QPs linked to piowait list. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Wakeup QPs orphaned on wait list after flushMike Marciniszyn1-0/+17
Once an SDMA engine is taken down due to a link failure, any waiting QPs that do not have outstanding descriptors in the ring will stay on the dmawait list as long as the port is down. Since there is no timer running, they will stay there for a long time. The fix is to wake up all iowaits linked to dmawait. The send engine will build and post packets that get flushed back. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Use aborts to trigger RC throttlingMike Marciniszyn3-4/+37
SDMA and pio flushes will cause a lot of packets to be transmitted after a link has gone down, using a lot of CPU to retransmit packets. Fix for RC QPs by recognizing the flush status and: - Forcing a timer start - Putting the QP into a "send one" mode Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Create inline to get extended headersMike Marciniszyn2-20/+32
This paves the way for another patch that reacts to a flush sdma completion for RC. Fixes: 81cd3891f021 ("IB/hfi1: Add support for 16B Management Packets") Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Silence txreq allocation warningsMike Marciniszyn2-2/+3
The following warning can happen when a memory shortage occurs during txreq allocation: [10220.939246] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) [10220.939246] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0018.C4.072020161249 07/20/2016 [10220.939247] cache: mnt_cache, object size: 384, buffer size: 384, default order: 2, min order: 0 [10220.939260] Workqueue: hfi0_0 _hfi1_do_send [hfi1] [10220.939261] node 0: slabs: 1026568, objs: 43115856, free: 0 [10220.939262] Call Trace: [10220.939262] node 1: slabs: 820872, objs: 34476624, free: 0 [10220.939263] dump_stack+0x5a/0x73 [10220.939265] warn_alloc+0x103/0x190 [10220.939267] ? wake_all_kswapds+0x54/0x8b [10220.939268] __alloc_pages_slowpath+0x86c/0xa2e [10220.939270] ? __alloc_pages_nodemask+0x2fe/0x320 [10220.939271] __alloc_pages_nodemask+0x2fe/0x320 [10220.939273] new_slab+0x475/0x550 [10220.939275] ___slab_alloc+0x36c/0x520 [10220.939287] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939299] ? __get_txreq+0x54/0x160 [hfi1] [10220.939310] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939312] __slab_alloc+0x40/0x61 [10220.939323] ? hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939325] kmem_cache_alloc+0x181/0x1b0 [10220.939336] hfi1_make_rc_req+0x90/0x18b0 [hfi1] [10220.939348] ? hfi1_verbs_send_dma+0x386/0xa10 [hfi1] [10220.939359] ? find_prev_entry+0xb0/0xb0 [hfi1] [10220.939371] hfi1_do_send+0x1d9/0x3f0 [hfi1] [10220.939372] process_one_work+0x171/0x380 [10220.939374] worker_thread+0x49/0x3f0 [10220.939375] kthread+0xf8/0x130 [10220.939377] ? max_active_store+0x80/0x80 [10220.939378] ? kthread_bind+0x10/0x10 [10220.939379] ret_from_fork+0x35/0x40 [10220.939381] SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC) The shortage is handled properly so the message isn't needed. Silence by adding the no warn option to the slab allocation. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-17IB/hfi1: Avoid hardlockup with flushlist_lockMike Marciniszyn1-6/+3
Heavy contention of the sde flushlist_lock can cause hard lockups at extreme scale when the flushing logic is under stress. Mitigate by replacing the item at a time copy to the local list with an O(1) list_splice_init() and using the high priority work queue to do the flushes. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Cc: <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2019-06-18KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real modeSuraj Jitindar Singh1-1/+10
The hcall H_SET_DAWR is used by a guest to set the data address watchpoint register (DAWR). This hcall is handled in the host in kvmppc_h_set_dawr() which can be called in either real mode on the guest exit path from hcall_try_real_mode() in book3s_hv_rmhandlers.S, or in virtual mode when called from kvmppc_pseries_do_hcall() in book3s_hv.c. The function kvmppc_h_set_dawr() updates the dawr and dawrx fields in the vcpu struct accordingly and then also writes the respective values into the DAWR and DAWRX registers directly. It is necessary to write the registers directly here when calling the function in real mode since the path to re-enter the guest won't do this. However when in virtual mode the host DAWR and DAWRX values have already been restored, and so writing the registers would overwrite these. Additionally there is no reason to write the guest values here as these will be read from the vcpu struct and written to the registers appropriately the next time the vcpu is run. This also avoids the case when handling h_set_dawr for a nested guest where the guest hypervisor isn't able to write the DAWR and DAWRX registers directly and must rely on the real hypervisor to do this for it when it calls H_ENTER_NESTED. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Suraj Jitindar Singh <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-18KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()Michael Neuling1-1/+3
Commit c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") screwed up some assembler and corrupted a pointer in r3. This resulted in crashes like the below: BUG: Kernel NULL pointer dereference at 0x000013bf Faulting instruction address: 0xc00000000010b044 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 8 PID: 1771 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc4+ #3 NIP: c00000000010b044 LR: c0080000089dacf4 CTR: c00000000010aff4 REGS: c00000179b397710 TRAP: 0300 Not tainted (5.2.0-rc4+) MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 42244842 XER: 00000000 CFAR: c00000000010aff8 DAR: 00000000000013bf DSISR: 42000000 IRQMASK: 0 GPR00: c0080000089dd6bc c00000179b3979a0 c008000008a04300 ffffffffffffffff GPR04: 0000000000000000 0000000000000003 000000002444b05d c0000017f11c45d0 ... NIP kvmppc_h_set_dabr+0x50/0x68 LR kvmppc_pseries_do_hcall+0xa3c/0xeb0 [kvm_hv] Call Trace: 0xc0000017f11c0000 (unreliable) kvmppc_vcpu_run_hv+0x694/0xec0 [kvm_hv] kvmppc_vcpu_run+0x34/0x48 [kvm] kvm_arch_vcpu_ioctl_run+0x2f4/0x400 [kvm] kvm_vcpu_ioctl+0x460/0x850 [kvm] do_vfs_ioctl+0xe4/0xb40 ksys_ioctl+0xc4/0x110 sys_ioctl+0x28/0x80 system_call+0x5c/0x70 Instruction dump: 4082fff4 4c00012c 38600000 4e800020 e96280c0 896b0000 2c2b0000 3860ffff 4d820020 50852e74 508516f6 78840724 <f88313c0> f8a313c8 7c942ba6 7cbc2ba6 Fix the bug by only changing r3 when we are returning immediately. Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option") Signed-off-by: Michael Neuling <[email protected]> Signed-off-by: Suraj Jitindar Singh <[email protected]> Reported-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2019-06-17Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2-1/+2
Pull vfs fixes from Al Viro: "MS_MOVE regression fix + breakage in fsmount(2) (also introduced in this cycle, along with fsmount(2) itself). I'm still digging through the piles of mail, so there might be more fixes to follow, but these two are obvious and self-contained, so there's no point delaying those..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namespace: fix unprivileged mount propagation vfs: fsmount: add missing mntget()
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds161-539/+2139
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-17fs/namespace: fix unprivileged mount propagationChristian Brauner2-1/+1
When propagating mounts across mount namespaces owned by different user namespaces it is not possible anymore to move or umount the mount in the less privileged mount namespace. Here is a reproducer: sudo mount -t tmpfs tmpfs /mnt sudo --make-rshared /mnt # create unprivileged user + mount namespace and preserve propagation unshare -U -m --map-root --propagation=unchanged # now change back to the original mount namespace in another terminal: sudo mkdir /mnt/aaa sudo mount -t tmpfs tmpfs /mnt/aaa # now in the unprivileged user + mount namespace mount --move /mnt/aaa /opt Unfortunately, this is a pretty big deal for userspace since this is e.g. used to inject mounts into running unprivileged containers. So this regression really needs to go away rather quickly. The problem is that a recent change falsely locked the root of the newly added mounts by setting MNT_LOCKED. Fix this by only locking the mounts on copy_mnt_ns() and not when adding a new mount. Fixes: 3bd045cc9c4b ("separate copying and locking mount tree on cross-userns copies") Cc: Linus Torvalds <[email protected]> Cc: Al Viro <[email protected]> Cc: <[email protected]> Tested-by: Christian Brauner <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: Christian Brauner <[email protected]> Signed-off-by: Al Viro <[email protected]>
2019-06-17vfs: fsmount: add missing mntget()Eric Biggers1-0/+1
sys_fsmount() needs to take a reference to the new mount when adding it to the anonymous mount namespace. Otherwise the filesystem can be unmounted while it's still in use, as found by syzkaller. Reported-by: Mark Rutland <[email protected]> Reported-by: [email protected] Reported-by: [email protected] Fixes: 93766fbd2696 ("vfs: syscall: Add fsmount() to create a mount for a superblock") Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Al Viro <[email protected]>
2019-06-17cifs: fix GlobalMid_Lock bug in cifs_reconnectRonnie Sahlberg1-0/+2
We can not hold the GlobalMid_Lock spinlock during the dfs processing in cifs_reconnect since it invokes things that may sleep and thus trigger : BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23 Thus we need to drop the spinlock during this code block. RHBZ: 1716743 Cc: [email protected] Signed-off-by: Ronnie Sahlberg <[email protected]> Acked-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-06-17SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing writeSteve French1-1/+1
Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code. This (for example) fixes large file copies to Windows 10 on fast networks. Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2019-06-17Merge branch 'erofs_fix' into staging-linusGreg Kroah-Hartman3-3/+31
A branch is needed here to get the fix into staging-next as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-17staging: erofs: add requirements field in superblockGao Xiang3-3/+31
There are some backward incompatible features pending for months, mainly due to on-disk format expensions. However, we should ensure that it cannot be mounted with old kernels. Otherwise, it will causes unexpected behaviors. Fixes: ba2b77a82022 ("staging: erofs: add super block operations") Cc: <[email protected]> # 4.19+ Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-17Merge tag 'iio-fixes-for-5.2b' of ↵Greg Kroah-Hartman6-19/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 5.2 cycle. * ad7150 - sense of bit for controlling adaptive vs fixed threshold was flipped. * adt7316 - Fix a build issue due to wrong headers for gpio usage. * lsm6dsx - correctly suspend / resume i2c slaves when the host goes to sleep. * mlx90632 - relax a compatability check to allow for newer devices. Also one counters fix * counter/ftm-quaddec - missing dependencies in Kconfig. * tag 'iio-fixes-for-5.2b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: counter/ftm-quaddec: Add missing dependencies in Kconfig staging: iio: adt7316: Fix build errors when GPIOLIB is not set iio: temperature: mlx90632 Relax the compatibility check iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller staging:iio:ad7150: fix threshold mode config bit
2019-06-17Merge branch 'tcp-fixes'David S. Miller12-9/+58
Eric Dumazet says: ==================== tcp: make sack processing more robust Jonathan Looney brought to our attention multiple problems in TCP stack at the sender side. SACK processing can be abused by malicious peers to either cause overflows, or increase of memory usage. First two patches fix the immediate problems. Since the malicious peers abuse senders by advertizing a very small MSS in their SYN or SYNACK packet, the last two patches add a new sysctl so that admins can chose a higher limit for MSS clamping. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-06-17arm64: ssbd: explicitly depend on <linux/prctl.h>Anisse Astier1-0/+1
Fix ssbd.c which depends implicitly on asm/ptrace.h including linux/prctl.h (through for example linux/compat.h, then linux/time.h, linux/seqlock.h, linux/spinlock.h and linux/irqflags.h), and uses PR_SPEC* defines. This is an issue since we'll soon be removing the include from asm/ptrace.h. Fixes: 9cdc0108baa8 ("arm64: ssbd: Add prctl interface for per-thread mitigation") Cc: [email protected] Signed-off-by: Anisse Astier <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-06-17Merge tag 'riscv-for-v5.2/fixes-rc6' of ↵Linus Torvalds12-6/+505
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "This contains fixes, defconfig, and DT data changes for the v5.2-rc series. The fixes are relatively straightforward: - Addition of a TLB fence in the vmalloc_fault path, so the CPU doesn't enter an infinite page fault loop - Readdition of the pm_power_off export, so device drivers that reassign it can now be built as modules - A udelay() fix for RV32, fixing a miscomputation of the delay time - Removal of deprecated smp_mb__*() barriers This also adds initial DT data infrastructure for arch/riscv, along with initial data for the SiFive FU540-C000 SoC and the corresponding HiFive Unleashed board. We also update the RV64 defconfig to include some core drivers for the FU540 in the build" * tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove unused barrier defines riscv: mm: synchronize MMU after pte change riscv: dts: add initial board data for the SiFive HiFive Unleashed riscv: dts: add initial support for the SiFive FU540-C000 SoC dt-bindings: riscv: convert cpu binding to json-schema dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540 arch: riscv: add support for building DTB files from DT source data riscv: Fix udelay in RV32. riscv: export pm_power_off again RISC-V: defconfig: enable clocks, serial console
2019-06-17block: fix page leak when merging to same pageChristoph Hellwig1-2/+10
When multiple iovecs reference the same page, each get_user_page call will add a reference to the page. But once we've created the bio that information gets lost and only a single reference will be dropped after I/O completion. Use the same_page information returned from __bio_try_merge_page to drop additional references to pages that were already present in the bio. Based on a patch from Ming Lei. Link: https://lkml.org/lkml/2019/4/23/64 Fixes: 576ed913 ("block: use bio_add_page in bio_iov_iter_get_pages") Reported-by: David Gibson <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-06-17block: return from __bio_try_merge_page if merging occured in the same pageChristoph Hellwig4-23/+28
We currently have an input same_page parameter to __bio_try_merge_page to prohibit merging in the same page. The rationale for that is that some callers need to account for every page added to a bio. Instead of letting these callers call twice into the merge code to account for the new vs existing page cases, just turn the paramter into an output one that returns if a merge in the same page occured and let them act accordingly. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-06-17Btrfs: fix failure to persist compression property xattr deletion on fsyncFilipe Manana2-5/+3
After the recent series of cleanups in the properties and xattrs modules that landed in the 5.2 merge window, we ended up with a regression where after deleting the compression xattr property through the setflags ioctl, we don't set the BTRFS_INODE_COPY_EVERYTHING flag in the inode anymore. As a consequence, if the inode was fsync'ed when it had the compression property set, after deleting the compression property through the setflags ioctl and fsync'ing again the inode, the log will still contain the compression xattr, because the inode did not had that bit set, which made the fsync not delete all xattrs from the log and copy all xattrs from the subvolume tree to the log tree. This regression happens due to the fact that that series of cleanups made btrfs_set_prop() call the old function do_setxattr() (which is now named btrfs_setxattr()), and not the old version of btrfs_setxattr(), which is now called btrfs_setxattr_trans(). Fix this by setting the BTRFS_INODE_COPY_EVERYTHING bit in the current btrfs_setxattr() function and remove it from everywhere else, including its setup at btrfs_ioctl_setflags(). This is cleaner, avoids similar regressions in the future, and centralizes the setup of the bit. After all, the need to setup this bit should only be in the xattrs module, since it is an implementation of xattrs. Fixes: 04e6863b19c722 ("btrfs: split btrfs_setxattr calls regarding transaction") CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-06-17riscv: remove unused barrier definesRolf Eike Beer1-5/+0
They were introduced in commit fab957c11efe ("RISC-V: Atomic and Locking Code") long after commit 2e39465abc4b ("locking: Remove deprecated smp_mb__() barriers") removed the remnants of all previous instances from the tree. Signed-off-by: Rolf Eike Beer <[email protected]> [[email protected]: stripped spurious mbox header from patch description; fixed commit references in patch header] Signed-off-by: Paul Walmsley <[email protected]>
2019-06-17usb: chipidea: udc: workaround for endpoint conflict issuePeter Chen1-0/+20
An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <[email protected]> #v3.14+ Cc: Fabio Estevam <[email protected]> Cc: Greg KH <[email protected]> Cc: Sergei Shtylyov <[email protected]> Cc: Jun Li <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-17MAINTAINERS: Change QCOM repo locationAndy Gross1-1/+1
This patch updates the Qualcomm SoC repo to a new location. Signed-off-by: Andy Gross <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2019-06-17mmc: mediatek: fix SDIO IRQ detection issuejjian zhou1-0/+2
If cmd19 timeout or response crcerr occurs during execute_tuning(), it need invoke msdc_reset_hw(). Otherwise SDIO IRQ can't be detected. Signed-off-by: jjian zhou <[email protected]> Signed-off-by: Chaotian Jing <[email protected]> Signed-off-by: Yong Mao <[email protected]> Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-06-17mmc: mediatek: fix SDIO IRQ interrupt handle flowjjian zhou1-17/+20
SDIO IRQ is triggered by low level. It need disable SDIO IRQ detected function. Otherwise the interrupt register can't be cleared. It will process the interrupt more. Signed-off-by: Jjian Zhou <[email protected]> Signed-off-by: Chaotian Jing <[email protected]> Signed-off-by: Yong Mao <[email protected]> Fixes: 5215b2e952f3 ("mmc: mediatek: Add MMC_CAP_SDIO_IRQ support") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2019-06-17mmc: core: complete HS400 before checking statusWolfram Sang1-3/+3
We don't have a reproducible error case, yet our BSP team suggested that the mmc_switch_status() command in mmc_select_hs400() should come after the callback into the driver completing HS400 setup. It makes sense to me because we want the status of a fully setup HS400, so it will increase the reliability of the mmc_switch_status() command. Reported-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Fixes: ba6c7ac3a2f4 ("mmc: core: more fine-grained hooks for HS400 tuning") Signed-off-by: Ulf Hansson <[email protected]>
2019-06-17riscv: mm: synchronize MMU after pte changeShihPo Hung1-0/+13
Because RISC-V compliant implementations can cache invalid entries in TLB, an SFENCE.VMA is necessary after changes to the page table. This patch adds an SFENCE.vma for the vmalloc_fault path. Signed-off-by: ShihPo Hung <[email protected]> [[email protected]: reversed tab->whitespace conversion, wrapped comment lines] Signed-off-by: Paul Walmsley <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Albert Ou <[email protected]> Cc: Paul Walmsley <[email protected]> Cc: [email protected] Cc: [email protected]
2019-06-17MAINTAINERS: Update my email address to use @kernel.orgWill Deacon2-8/+9
My @arm.com address will stop working at the end of August, so update to my @kernel.org address where you'll still be able to reach me. When I say "stop working" I really mean "will go to my line manager", so send patches there at your peril because they may reply with roadmaps and spreadsheets. You have been warned. Cc: Will Deacon <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Russell King <[email protected]> Cc: "Paul E . McKenney" <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: arm-soc <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-06-17sched/fair: Don't push cfs_bandwith slack timers forward[email protected]2-4/+11
When a cfs_rq sleeps and returns its quota, we delay for 5ms before waking any throttled cfs_rqs to coalesce with other cfs_rqs going to sleep, as this has to be done outside of the rq lock we hold. The current code waits for 5ms without any sleeps, instead of waiting for 5ms from the first sleep, which can delay the unthrottle more than we want. Switch this around so that we can't push this forward forever. This requires an extra flag rather than using hrtimer_active, since we need to start a new timer if the current one is in the process of finishing. Signed-off-by: Ben Segall <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Xunlei Pang <[email protected]> Acked-by: Phil Auld <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17sched/core: Optimize try_to_wake_up() for local wakeupsPeter Zijlstra1-5/+29
Jens reported that significant performance can be had on some block workloads by special casing local wakeups. That is, wakeups on the current task before it schedules out. Given something like the normal wait pattern: for (;;) { set_current_state(TASK_UNINTERRUPTIBLE); if (cond) break; schedule(); } __set_current_state(TASK_RUNNING); Any wakeup (on this CPU) after set_current_state() and before schedule() would benefit from this. Normal wakeups take p->pi_lock, which serializes wakeups to the same task. By eliding that we gain concurrency on: - ttwu_stat(); we already had concurrency on rq stats, this now also brings it to task stats. -ENOCARE - tracepoints; it is now possible to get multiple instances of trace_sched_waking() (and possibly trace_sched_wakeup()) for the same task. Tracers will have to learn to cope. Furthermore, p->pi_lock is used by set_special_state(), to order against TASK_RUNNING stores from other CPUs. But since this is strictly CPU local, we don't need the lock, and set_special_state()'s disabling of IRQs is sufficient. After the normal wakeup takes p->pi_lock it issues smp_mb__after_spinlock(), in order to ensure the woken task must observe prior stores before we observe the p->state. If this is CPU local, this will be satisfied with a compiler barrier, and we rely on try_to_wake_up() being a funcation call, which implies such. Since, when 'p == current', 'p->on_rq' must be true, the normal wakeup would continue into the ttwu_remote() branch, which normally is concerned with exactly this wakeup scenario, except from a remote CPU. IOW we're waking a task that is still running. In this case, we can trivially avoid taking rq->lock, all that's left from this is to set p->state. This then yields an extremely simple and fast path for 'p == current'. Reported-by: Jens Axboe <[email protected]> Tested-by: Jens Axboe <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Qian Cai <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17sched/fair: Fix "runnable_avg_yN_inv" not used warningsQian Cai2-2/+3
runnable_avg_yN_inv[] is only used in kernel/sched/pelt.c but was included in several other places because they need other macros all came from kernel/sched/sched-pelt.h which was generated by Documentation/scheduler/sched-pelt. As the result, it causes compilation a lot of warnings, kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] kernel/sched/sched-pelt.h:4:18: warning: 'runnable_avg_yN_inv' defined but not used [-Wunused-const-variable=] ... Silence it by appending the __maybe_unused attribute for it, so all generated variables and macros can still be kept in the same file. Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17sched/fair: Clean up definition of NOHZ blocked load functionsValentin Schneider1-10/+16
cfs_rq_has_blocked() and others_have_blocked() are only used within update_blocked_averages(). The !CONFIG_FAIR_GROUP_SCHED version of the latter calls them within a #define CONFIG_NO_HZ_COMMON block, whereas the CONFIG_FAIR_GROUP_SCHED one calls them unconditionnally. As reported by Qian, the above leads to this warning in !CONFIG_NO_HZ_COMMON configs: kernel/sched/fair.c: In function 'update_blocked_averages': kernel/sched/fair.c:7750:7: warning: variable 'done' set but not used [-Wunused-but-set-variable] It wouldn't be wrong to keep cfs_rq_has_blocked() and others_have_blocked() as they are, but since their only current use is to figure out when we can stop calling update_blocked_averages() on fully decayed NOHZ idle CPUs, we can give them a new definition for !CONFIG_NO_HZ_COMMON. Change the definition of cfs_rq_has_blocked() and others_have_blocked() for !CONFIG_NO_HZ_COMMON so that the NOHZ-specific blocks of update_blocked_averages() become no-ops and the 'done' variable gets optimised out. While at it, remove the CONFIG_NO_HZ_COMMON block from the !CONFIG_FAIR_GROUP_SCHED definition of update_blocked_averages() by using the newly-introduced update_blocked_load_status() helper. No change in functionality intended. [ Additions by Peter Zijlstra. ] Reported-by: Qian Cai <[email protected]> Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Vincent Guittot <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17sched/core: Add __sched tag for io_schedule()Gao Xiang1-1/+1
Non-inline io_schedule() was introduced in: commit 10ab56434f2f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()") Keep in line with io_schedule_timeout(), otherwise "/proc/<pid>/wchan" will report io_schedule() rather than its callers when waiting for IO. Reported-by: Jilong Kou <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Tejun Heo <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Miao Xie <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 10ab56434f2f ("sched/core: Separate out io_schedule_prepare() and io_schedule_finish()") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17Merge tag 'v5.2-rc5' into sched/core, to pick up fixesIngo Molnar4083-34971/+8539
Signed-off-by: Ingo Molnar <[email protected]>
2019-06-17riscv: dts: add initial board data for the SiFive HiFive UnleashedPaul Walmsley2-0/+67
Add initial board data for the SiFive HiFive Unleashed A00. Currently the data populated in this DT file describes the board DRAM configuration and the external clock sources that supply the PRCI. Signed-off-by: Paul Walmsley <[email protected]> Signed-off-by: Paul Walmsley <[email protected]> Tested-by: Loys Ollivier <[email protected]> Tested-by: Kevin Hilman <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Albert Ou <[email protected]> Cc: Antony Pavlov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.