aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-09USB: serial: ch341: fix open error handlingJohan Hovold1-3/+10
Make sure to stop the interrupt URB before returning on errors during open. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-01-09USB: serial: ch341: fix modem-control and B0 handlingJohan Hovold1-9/+7
The modem-control signals are managed by the tty-layer during open and should not be asserted prematurely when set_termios is called from driver open. Also make sure that the signals are asserted only when changing speed from B0. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-01-09USB: serial: ch341: fix open and resume after B0Johan Hovold1-1/+3
The private baud_rate variable is used to configure the port at open and reset-resume and must never be set to (and left at) zero or reset-resume and all further open attempts will fail. Fixes: aa91def41a7b ("USB: ch341: set tty baud speed according to tty struct") Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-01-09USB: serial: ch341: fix initial modem-control stateJohan Hovold1-1/+0
DTR and RTS will be asserted by the tty-layer when the port is opened and deasserted on close (if HUPCL is set). Make sure the initial state is not-asserted before the port is first opened as well. Fixes: 664d5df92e88 ("USB: usb-serial ch341: support for DTR/RTS/CTS") Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-01-09ASoC: rt5645: set sel_i2s_pre_div1 to 2Bard Liao1-0/+3
The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2017-01-09spi: spi-axi: Free resources on error pathChristophe JAILLET1-1/+2
We should go to 'err_put_master' here instead of returning directly. Otherwise a call to 'spi_master_put' is missing. Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2017-01-09x86/boot: Add missing declaration of string functionsNicholas Mc Guire2-0/+10
Add the missing declarations of basic string functions to string.h to allow a clean build. Fixes: 5be865661516 ("String-handling functions for the new x86 setup code.") Signed-off-by: Nicholas Mc Guire <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2017-01-09drm: fix compilations issues introduced by "drm: allow to use mmuless SoC"Benjamin Gaignard12-12/+13
Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: Benjamin Gaignard <[email protected]> Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-01-09btrfs: make tracepoint format strings more compactDavid Sterba1-56/+56
We've recently added the fsid to trace events, this makes the line quite long. To reduce the it again, remove extra spaces around = and remove ",". Signed-off-by: David Sterba <[email protected]>
2017-01-09Btrfs: add truncated_len for ordered extent tracepointsLiu Bo1-0/+4
This can help us monitor truncated ordered extents. Signed-off-by: Liu Bo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2017-01-09Btrfs: add 'inode' for extent map tracepointLiu Bo2-5/+9
'inode' is an important field for btrfs_get_extent, lets trace it. Signed-off-by: Liu Bo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2017-01-09drm: Change the return type of the unload hook to voidGabriel Krisman Bertazi33-73/+39
The integer returned by the unload hook is ignored by the drm core, so let's make it void. This patch was created using the following Coccinelle semantic script (except for the declaration and comment in drm_drv.h): Compile-tested only. // <smpl> @ get_name @ struct drm_driver drv; identifier fn; @@ drv.unload = fn; @ replace_type @ identifier get_name.fn; @@ - int + void fn (...) { ... } @ remove_return_param @ identifier get_name.fn; @@ void fn (...) { <... if (...) return - ... ; ...> } @ drop_final_return @ identifier get_name.fn; @@ void fn (...) { ... - return 0; } // </smpl> Suggested-by: Daniel Vetter <[email protected]> Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Acked-by: Christian König <[email protected]>. Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-01-09btrfs: fix crash when tracepoint arguments are freed by wq callbacksDavid Sterba2-13/+24
Enabling btrfs tracepoints leads to instant crash, as reported. The wq callbacks could free the memory and the tracepoints started to dereference the members to get to fs_info. The proposed fix https://marc.info/?l=linux-btrfs&m=148172436722606&w=2 removed the tracepoints but we could preserve them by passing only the required data in a safe way. Fixes: bc074524e123 ("btrfs: prefix fsid to all trace events") CC: [email protected] # 4.8+ Reported-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2017-01-09drm: add more document for drm_crtc_from_index()Shawn Guo2-2/+5
Add a bit more document for function drm_crtc_from_index() to cross link it with drm_crtc_from_index(), and explain that the function is useful in vblank code. While at it, add cross link comment for drm_plane_from_index() as well. Signed-off-by: Shawn Guo <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-01-09drm: remove useless parameters from drm_pick_cmdline_mode functionVincent Abriou3-7/+5
drm_pick_cmdline_mode width and height parameters are useless. Just remove them. Cc: Daniel Vetter <[email protected]> Cc: Jani Nikula <[email protected]> Signed-off-by: Vincent Abriou <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-01-09mac80211: implement multicast forwarding on fast-RX pathJohannes Berg1-8/+18
In AP (or VLAN) mode, when unicast 802.11 packets are received, they might actually be multicast after conversion. In this case the fast-RX path didn't handle them properly to send them back to the wireless medium. Implement that by copying the SKB and sending it back out. The possible alternative would be to just punt the packet back to the regular (slow) RX path, but since we have almost all of the required code here already it's not so complicated to add here. Punting it back would also mean acquiring the spinlock, which would be bad for the stated purpose of the fast-RX path, to enable well-performing parallel RX. Cc: [email protected] Signed-off-by: Johannes Berg <[email protected]>
2017-01-09drm/i915/gvt: cleanup GFP flagsJike Song1-24/+15
In gvt, almost all memory allocations are in sleepable contexts. It's fault-prone to use GFP_ATOMIC everywhere. Replace it with GFP_KERNEL wherever possible. Signed-off-by: Jike Song <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915: Update DRIVER_DATE to 20170109Daniel Vetter1-2/+2
Signed-off-by: Daniel Vetter <[email protected]>
2017-01-09drm/bridge: analogix dp: Fix runtime PM state on driver bindMarek Szyprowski1-0/+7
Analogix_dp_bind() can be called from component framework, which doesn't guarantee proper runtime PM state of the device during bind operation, so ensure that device is runtime active before doing any register access. This ensures that the power domain, to which DP module belongs, is turned on. While at it, also fix the unbalanced call to phy_power_on() in analogix_dp_bind() function. This patch solves the following kernel oops on Samsung Exynos5250 Snow board: Unhandled fault: imprecise external abort (0x406) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 406 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 75 Comm: kworker/0:2 Not tainted 4.9.0 #1046 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events deferred_probe_work_func task: ee272300 task.stack: ee312000 PC is at analogix_dp_enable_sw_function+0x18/0x2c LR is at analogix_dp_init_dp+0x2c/0x50 ... [<c03fcb38>] (analogix_dp_enable_sw_function) from [<c03fa9c4>] (analogix_dp_init_dp+0x2c/0x50) [<c03fa9c4>] (analogix_dp_init_dp) from [<c03fab6c>] (analogix_dp_bind+0x184/0x42c) [<c03fab6c>] (analogix_dp_bind) from [<c03fdb84>] (component_bind_all+0xf0/0x218) [<c03fdb84>] (component_bind_all) from [<c03ed64c>] (exynos_drm_load+0x134/0x200) [<c03ed64c>] (exynos_drm_load) from [<c03d5058>] (drm_dev_register+0xa0/0xd0) [<c03d5058>] (drm_dev_register) from [<c03d66b8>] (drm_platform_init+0x58/0xb0) [<c03d66b8>] (drm_platform_init) from [<c03fe0c4>] (try_to_bring_up_master+0x14c/0x188) [<c03fe0c4>] (try_to_bring_up_master) from [<c03fe188>] (component_add+0x88/0x138) [<c03fe188>] (component_add) from [<c0403a38>] (platform_drv_probe+0x50/0xb0) [<c0403a38>] (platform_drv_probe) from [<c0402470>] (driver_probe_device+0x1f0/0x2a8) [<c0402470>] (driver_probe_device) from [<c0400a54>] (bus_for_each_drv+0x44/0x8c) [<c0400a54>] (bus_for_each_drv) from [<c04021f8>] (__device_attach+0x9c/0x100) [<c04021f8>] (__device_attach) from [<c04018e8>] (bus_probe_device+0x84/0x8c) [<c04018e8>] (bus_probe_device) from [<c0401d1c>] (deferred_probe_work_func+0x60/0x8c) [<c0401d1c>] (deferred_probe_work_func) from [<c012fc14>] (process_one_work+0x120/0x318) [<c012fc14>] (process_one_work) from [<c012fe34>] (process_scheduled_works+0x28/0x38) [<c012fe34>] (process_scheduled_works) from [<c0130048>] (worker_thread+0x204/0x4ac) [<c0130048>] (worker_thread) from [<c01352c4>] (kthread+0xd8/0xf4) [<c01352c4>] (kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c) Code: e59035f0 e5935018 f57ff04f e3c55001 (f57ff04e) ---[ end trace 3d1d0d87796de344 ]--- Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Archit Taneja <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-01-08Merge remote-tracking branch 'mkp-scsi/fixes' into fixesJames Bottomley5-4/+24
2017-01-09drm/i915/gvt/kvmgt: return meaningful error for vgpu creating failureJike Song1-4/+10
The vgpu_create() routine we called returns meaningful errors to indicate failures, so we'd better to pass it to our caller, the mdev framework, whereby the sysfs is able to tell userspace what happened. Signed-off-by: Jike Song <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: cleanup opregion memory allocation codeJike Song2-6/+5
According to the spec, ACPI OpRegion must be placed at a physical address below 4G. That is, for a vGPU it must be associated with a GPA below 4G, but on host side, it doesn't matter where the backing pages actually are. So when allocating pages from host, the GFP_DMA32 flag is unnecessary. Also the allocation is from a sleepable context, so GFP_ATOMIC is also unnecessary. This patch also removes INTEL_GVT_OPREGION_PORDER and use get_order() instead. Signed-off-by: Jike Song <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: destroy the allocated idr on vgpu creating failuresJike Song1-1/+3
Once idr_alloc gets called data is allocated within the idr list, if any error occurs afterwards, we should undo that by idr_remove on the error path. Signed-off-by: Jike Song <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: init/destroy vgpu_idr properlyJike Song1-1/+7
An idr should be initialized before use and destroyed afterwards. Signed-off-by: Jike Song <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: dec vgpu->running_workload_num after the workload is really doneChangbin Du1-5/+5
The vgpu->running_workload_num is used to determine whether a vgpu has any workload running or not. So we should make sure the workload is really done before we dec running_workload_num. Function complete_current_workload is not the right place to do it, since this function is still processing the workload. This patch move the dec op afterward. v2: move dec op before wake_up(&scheduler->workload_complete_wq) (Min He) Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Min He <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: fix use after free for workloadChangbin Du1-2/+2
In the function workload_thread(), we invoke complete_current_workload() to cleanup the just processed workload (workload will be freed there). So we cannot access workload->req after that. This patch move complete_current_workload() afterward. Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: remove duplicated definitionZhenyu Wang1-7/+0
Remove duplicated definition for resource size in aperture_gm.c which are already defined in gvt.h. Need only one to take effect. Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: adjust high memory size for default vGPU typeZhenyu Wang1-2/+2
Previous high mem size initialized for vGPU type was too small which caused failure for some VMs. This trys to take minimal value of 384MB for each VM and enlarge default high mem size to make guest driver happy. Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: print correct value for untracked mmioPei Zhang1-15/+16
In function intel_vgpu_emulate_mmio_read, the untracked mmio register is dumped through kernel log, but the register value is not correct. This patch fixes this issue. V2: fix the fromat warning from checkpatch.pl. Signed-off-by: Pei Zhang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: always use readq and writeqChangbin Du1-13/+2
The readq and writeq are already offered by drm_os_linux.h. So we can use them directly whithout dectecting their presence. This patch removed the duplicated code. Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: fix return value in mul_force_wake_writeChangbin Du1-1/+1
All mmio handlers should return a negetive value for failure, not 1. Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: fix error handing of tlb_control emulationChangbin Du1-4/+2
Return ealier for a invalid access, else it would false set tlb flag for RCS. Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-09drm/i915/gvt: verify functions types in new_mmio_info()Nicolas Iooss1-2/+3
The current prototype of new_mmio_info() uses void* for parameters read and write, which are functions with precise calling conventions (argument types and return type). Write down these conventions in new_mmio_info() definition. This has been reported by the following warnings when clang is used to build the kernel: drivers/gpu/drm/i915/gvt/handlers.c:124:21: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->read = read ? read : intel_vgpu_default_mmio_read; ^ ~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/gvt/handlers.c:125:23: error: pointer type mismatch ('void *' and 'int (*)(struct intel_vgpu *, unsigned int, void *, unsigned int)') [-Werror,-Wpointer-type-mismatch] info->write = write ? write : intel_vgpu_default_mmio_write; ^ ~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This allows the compiler to detect that sbi_ctl_mmio_write() returns a "bool" value instead of an expected "int" one. Fix this. Signed-off-by: Nicolas Iooss <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2017-01-08Merge branch 'bcm_sf2-fixes'David S. Miller1-2/+9
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple fixes Here are a couple of fixes for bcm_sf2, please queue these up for -stable as well, thank you very much! ==================== Signed-off-by: David S. Miller <[email protected]>
2017-01-08net: dsa: bcm_sf2: Utilize nested MDIO read/writeFlorian Fainelli1-2/+2
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-08net: dsa: bcm_sf2: Do not clobber b53_switch_opsFlorian Fainelli1-0/+7
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-09Merge tag 'drm-misc-next-2016-12-30' of ↵Dave Airlie226-2028/+5269
git://anongit.freedesktop.org/git/drm-misc into drm-next First -misc pull for 4.11: - drm_mm rework + lots of selftests (Chris Wilson) - new connector_list locking+iterators - plenty of kerneldoc updates - format handling rework from Ville - atomic helper changes from Maarten for better plane corner-case handling in drivers, plus the i915 legacy cursor patch that needs this - bridge cleanup from Laurent - plus plenty of small stuff all over - also contains a merge of the 4.10 docs tree so that we could apply the dma-buf kerneldoc patches It's a lot more than usual, but due to the merge window blackout it also covers about 4 weeks, so all in line again on a per-week basis. The more annoying part with no pull request for 4 weeks is managing cross-tree work. The -intel pull request I'll follow up with does conflict quite a bit with -misc here. Longer-term (if drm-misc keeps growing) a drm-next-queued to accept pull request for the next merge window during this time might be useful. I'd also like to backmerge -rc2+this into drm-intel next week, we have quite a pile of patches waiting for the stuff in here. * tag 'drm-misc-next-2016-12-30' of git://anongit.freedesktop.org/git/drm-misc: (126 commits) drm: Add kerneldoc markup for new @scan parameters in drm_mm drm/mm: Document locking rules drm: Use drm_mm_insert_node_in_range_generic() for everyone drm: Apply range restriction after color adjustment when allocation drm: Wrap drm_mm_node.hole_follows drm: Apply tight eviction scanning to color_adjust drm: Simplify drm_mm scan-list manipulation drm: Optimise power-of-two alignments in drm_mm_scan_add_block() drm: Compute tight evictions for drm_mm_scan drm: Fix application of color vs range restriction when scanning drm_mm drm: Unconditionally do the range check in drm_mm_scan_add_block() drm: Rename prev_node to hole in drm_mm_scan_add_block() drm: Fix O= out-of-tree builds for selftests drm: Extract struct drm_mm_scan from struct drm_mm drm: Add asserts to catch overflow in drm_mm_init() and drm_mm_init_scan() drm: Simplify drm_mm_clean() drm: Detect overflow in drm_mm_reserve_node() drm: Fix kerneldoc for drm_mm_scan_remove_block() drm: Promote drm_mm alignment to u64 drm: kselftest for drm_mm and restricted color eviction ...
2017-01-09Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie21-106/+146
into drm-fixes Fixes for 4.10: - Polaris 12 support - Add new amd-gfx mailing list to MAINTAINERS file - UVD clockgating fix - SI dpm fixes * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu
2017-01-08net: stmmac: fix maxmtu assignment to be within valid rangeKweh, Hock Leong2-1/+15
There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-09Merge branch 'msm-fixes-4.10' of ↵Dave Airlie3-9/+21
git://people.freedesktop.org/~robclark/linux into drm-fixes A few fixes for 4.10.. the first fixes a long-standing logic bug, that by luck (ie. size of packets written into RB for a submit) wasn't hit on a3xx/a4xx but was causing intermittent GPU lockups on a5xx. And a couple other robustness issues that Jordan noticed. * 'msm-fixes-4.10' of git://people.freedesktop.org/~robclark/linux: drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'meson-drm-fixes-for-4.10' of ↵Dave Airlie3-1/+23
git://people.freedesktop.org/~narmstrong/linux into drm-fixes - plan atomic check oops fix - fix CVBS init when HDMI is configured by bootloader - fix CVBS VDAC disable * tag 'meson-drm-fixes-for-4.10' of git://people.freedesktop.org/~narmstrong/linux: drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm/meson: Fix plane atomic check when no crtc for the plane
2017-01-09Merge tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux into drm-fixesDave Airlie1-9/+18
tilcdc fixes for v4.10. * tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux: drm: tilcdc: simplify the recovery from sync lost error on rev1
2017-01-09Merge tag 'drm-misc-fixes-2017-01-04' of ↵Dave Airlie1-1/+3
git://anongit.freedesktop.org/git/drm-misc into drm-fixes single drm fix. * tag 'drm-misc-fixes-2017-01-04' of git://anongit.freedesktop.org/git/drm-misc: drm: Clean up planes in atomic commit helper failure path
2017-01-08Linux 4.10-rc3Linus Torvalds1-1/+1
2017-01-08bpf: change back to orig prog on too many passesDaniel Borkmann1-0/+2
If after too many passes still no image could be emitted, then swap back to the original program as we do in all other cases and don't use the one with blinding. Fixes: 959a75791603 ("bpf, x86: add support for constant blinding") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-08Merge tag 'usb-4.10-rc3' of ↵Linus Torvalds46-316/+550
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
2017-01-08Merge tag 'char-misc-4.10-rc3' of ↵Linus Torvalds6-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
2017-01-08Merge tag 'staging-4.10-rc3' of ↵Linus Torvalds10-30/+56
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
2017-01-07tg3: Fix race condition in tg3_get_stats64().Michael Chan1-0/+3
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-07be2net: fix unicast list fillingIvan Vecera1-2/+1
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.