aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-16net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface typesKaricheri, Muralidharan2-4/+10
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16ip6_tunnel: Account for tunnel header in tunnel MTUJakub Sitnicki1-2/+2
With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by: Jakub Sitnicki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16perf probe: Fix to show correct locations for events on modulesMasami Hiramatsu1-7/+3
Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-01-16mld: do not remove mld souce list info when set link downHangbin Liu1-21/+30
This is an IPv6 version of commit 24803f38a5c0 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16Merge tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds5-7/+12
Pull nfsd fixes from Bruce Fields: "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for older bugs" * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux: svcrdma: avoid duplicate dma unmapping during error recovery sunrpc: don't call sleeping functions from the notifier block callbacks svcrpc: don't leak contexts on PROC_DESTROY nfsd: fix supported attributes for acl & labels
2017-01-16ARM: 8613/1: Fix the uaccess crash on PB11MPCoreLinus Walleij1-0/+7
The following patch was sketched by Russell in response to my crashes on the PB11MPCore after the patch for software-based priviledged no access support for ARMv8.1. See this thread: http://marc.info/?l=linux-arm-kernel&m=144051749807214&w=2 I am unsure what is going on, I suspect everyone involved in the discussion is. I just want to repost this to get the discussion restarted, as I still have to apply this patch with every kernel iteration to get my PB11MPCore Realview running. Testing by Neil Armstrong on the Oxnas NAS has revealed that this bug exist also on that widely deployed hardware, so we are probably currently regressing all ARM11MPCore systems. Cc: Russell King <[email protected]> Cc: Will Deacon <[email protected]> Fixes: a5e090acbf54 ("ARM: software-based priviledged-no-access support") Tested-by: Neil Armstrong <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-01-16be2net: fix MAC addr setting on privileged BE3 VFsIvan Vecera1-2/+10
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16be2net: don't delete MAC on close on unprivileged BE3 VFsIvan Vecera1-1/+5
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16be2net: fix status check in be_cmd_pmac_add()Ivan Vecera1-1/+1
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2 be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16cpmac: remove hopeless #warningArnd Bergmann1-1/+1
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16ravb: do not use zero-length alignment DMA descriptorMasaru Nagai1-0/+13
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <[email protected] Signed-off-by: Simon Horman <[email protected]> Acked-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16MAINTAINERS: update rmk's entriesRussell King1-2/+8
Update my entries in the MAINTAINERS file with the same email address for kernel work, and, now that the git tree is hosted on more suitable hardware, add git tree references where appropriate. Signed-off-by: Russell King <[email protected]>
2017-01-16mlx4: do not call napi_schedule() without careEric Dumazet1-1/+4
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f7bb3 ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: Eric Dumazet <[email protected]> Cc: Erez Shitrit <[email protected]> Cc: Eugenia Emantayev <[email protected]> Cc: Tariq Toukan <[email protected]> Acked-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16Merge branch 'for-upstream' of ↵David S. Miller2-18/+45
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2017-01-16 Here are a couple of important 802.15.4 driver fixes for the 4.10 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-01-16drm/amdkfd: fix improper return value on errorPan Bian1-1/+3
In function kfd_wait_on_events(), when the call to copy_from_user() fails, the value of return variable ret is 0. 0 indicates success, which is inconsistent with the execution status. This patch fixes the bug by assigning "-EFAULT" to ret when copy_from_user() returns an unexpected value. Signed-off-by: Pan Bian <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2017-01-16mmc: core: Restore parts of the polling policy when switch to HS/HS DDRUlf Hansson1-13/+12
Regressions for not being able to detect an eMMC HS DDR mode card has been reported for the sdhci-esdhc-imx driver, but potentially other sdhci variants may suffer from the similar problem. The commit e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"), is causing the problem. It seems that change moved one step to far, regarding changing the host's timing before polling for a busy card. To fix this, let's move back to the behaviour when the host's timing is updated after the polling, but before the switch status is fetched and validated. In cases when polling with CMD13, we keep validating the switch status at each attempt. However, to align with the other card busy detections mechanism, let's fetch and validate the switch status also after the host's timing is updated. Reported-by: Clemens Gruber <[email protected]> Reported-by: Gary Bisson <[email protected]> Fixes: e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch..") Cc: Shawn Lin <[email protected]> Cc: Dong Aisheng <[email protected]> Cc: Haibo Chen <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Tested-by: Clemens Gruber <[email protected]> Tested-by: Jagan Teki <[email protected]> Reviewed-by: Shawn Lin <[email protected]> Tested-by: Haibo Chen <[email protected]> Reviewed-by: Dong Aisheng <[email protected]>
2017-01-16drm/i915: Skip switch to kernel context if already doneChris Wilson2-1/+27
Some engines are never user or already sitting idle in the kernel context and for those we can skip flushing the current context for i915_gem_switch_to_kernel_context(). We used to perform this optimisation but that was removed for convenience of converting over to multiple timelines and handling the pending request queues. From the perspective of writing selftests, reducing the number of background operations on the engines makes defining assertions easier. Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915: Construct a request even if the GPU is currently hungChris Wilson1-25/+3
As we now have the ability to directly reset the GPU from the waiter (and so do not need to drop the lock in order to let the reset proceed) and also do not lose requests over a reset, we can now simply queue the request to occur after the reset rather than roundtripping to userspace (or worse failing with EIO). Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915: Assert we do not attempt to reuse an allocated nodeChris Wilson1-0/+2
i915_gem_gtt_reserve() and i915_gem_gtt_insert() can only work on unallocated nodes. Check that the callers complies. Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915: Catch attempting to use the aliasing_gtt's drm_mmChris Wilson1-0/+2
The aliasing_gtt is just that, an alias of the global GTT. We do not populate it directly, instead we always use the global GTT. Catch any attempt to incorrectly allocate ranges from the aliasing_gtt. Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Daniel Vetter <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915: Flush the change in debugobject before reallocationChris Wilson1-0/+1
When marking the debugobject as freed, be sure that write is flushed before another CPU may see it on a reallocation path. Only seen once in CI: [ 159.240873] WARNING: CPU: 3 PID: 6735 at lib/debugobjects.c:263 debug_print_object+0x87/0xb0 [ 159.240897] ODEBUG: init destroyed (active state 0) object type: i915_sw_fence hint: submit_notify+0x0/0x4c [i915] [ 159.240902] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul snd_hda_codec_realtek crc32_pclmul snd_hda_codec_generic snd_hda_codec_hdmi ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me lpc_ich mei e1000e ptp pps_core [last unloaded: i915] [ 159.240913] CPU: 3 PID: 6735 Comm: gem_exec_nop Tainted: G U 4.10.0-rc3-CI-Trybot_479+ #1 [ 159.240913] Hardware name: LENOVO 10AGS00601/SHARKBAY, BIOS FBKT34AUS 04/24/2013 [ 159.240914] Call Trace: [ 159.240916] dump_stack+0x67/0x92 [ 159.240919] __warn+0xc6/0xe0 [ 159.240920] warn_slowpath_fmt+0x4a/0x50 [ 159.240921] debug_print_object+0x87/0xb0 [ 159.240935] ? __i915_request_wait_for_execute+0x1d0/0x1d0 [i915] [ 159.240936] __debug_object_init+0xb2/0x410 [ 159.240950] ? __i915_request_wait_for_execute+0x1d0/0x1d0 [i915] [ 159.240951] debug_object_init+0x16/0x20 [ 159.240962] __i915_sw_fence_init+0x29/0x60 [i915] [ 159.240975] i915_gem_request_alloc+0x1fb/0x450 [i915] [ 159.240987] i915_gem_do_execbuffer.isra.15+0x798/0x1b20 [i915] [ 159.241000] i915_gem_execbuffer2+0xc0/0x250 [i915] [ 159.241003] drm_ioctl+0x200/0x450 [ 159.241016] ? i915_gem_execbuffer+0x330/0x330 [i915] [ 159.241018] do_vfs_ioctl+0x90/0x6e0 [ 159.241020] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 159.241021] SyS_ioctl+0x3c/0x70 [ 159.241023] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 159.241024] RIP: 0033:0x7f9bc4f41357 [ 159.241025] RSP: 002b:00007ffc6cd5c568 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 159.241026] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9bc4f41357 [ 159.241026] RDX: 00007ffc6cd5c640 RSI: 0000000040406469 RDI: 0000000000000003 [ 159.241027] RBP: 00007ffc6cd5c640 R08: 0000000000047508 R09: 0000000000000001 [ 159.241027] R10: 000b58552d323c3d R11: 0000000000000246 R12: 0000000040406469 [ 159.241028] R13: 0000000000000003 R14: 0000000000000004 R15: 0000000000000001 Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915/dp: Silence compiler for missing prototypeChris Wilson1-1/+1
drivers/gpu/drm/i915/intel_dp.c:3063:6: warning: no previous prototype for ‘intel_dp_get_alpm_status’ [-Wmissing-prototypes] bool intel_dp_get_alpm_status(struct intel_dp *intel_dp) Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16drm/i915: Use __printf markup to silence compilerChris Wilson1-0/+1
drivers/gpu/drm/i915/i915_gpu_error.c: In function ‘i915_error_vprintf’: drivers/gpu/drm/i915/i915_gpu_error.c:137:3: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vsnprintf(NULL, 0, f, tmp); ^~~ drivers/gpu/drm/i915/i915_gpu_error.c:144:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vsnprintf(e->buf + e->bytes, e->size - e->bytes, f, args); ^~~ Signed-off-by: Chris Wilson <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Joonas Lahtinen <[email protected]>
2017-01-16cpu/hotplug: Provide dynamic range for prepare stageThomas Gleixner2-4/+20
Mathieu reported that the LTTNG modules are broken as of 4.10-rc1 due to the removal of the cpu hotplug notifiers. Usually I don't care much about out of tree modules, but LTTNG is widely used in distros. There are two ways to solve that: 1) Reserve a hotplug state for LTTNG 2) Add a dynamic range for the prepare states. While #1 is the simplest solution, #2 is the proper one as we can convert in tree users, which do not care about ordering, to the dynamic range as well. Add a dynamic range which allows LTTNG to request states in the prepare stage. Reported-and-tested-by: Mathieu Desnoyers <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Mathieu Desnoyers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sebastian Sewior <[email protected]> Cc: Steven Rostedt <[email protected]> Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1701101353010.3401@nanos Signed-off-by: Thomas Gleixner <[email protected]>
2017-01-16usb: dwc2: host: fix Wmaybe-uninitialized warningNicholas Mc Guire1-2/+2
Uninitialized char* causes a sparse build-warning, fix it up by initializing it to NULL. Acked-by: John Youn <[email protected]> Signed-off-by: Nicholas Mc Guire <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2017-01-16usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM valueAmelie Delaunay1-2/+2
USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide interface or 0x9 when it has a 8-bit wide interface. GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5. In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim results in 0xD (0x5 | 0x9). That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+. Signed-off-by: Amelie Delaunay <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2017-01-16Merge tag 'gvt-fixes-2017-01-16' of https://github.com/01org/gvt-linux into ↵Jani Nikula9-142/+298
drm-intel-fixes gvt-fixes-2017-01-16 vGPU reset fixes from Changbin. Signed-off-by: Jani Nikula <[email protected]>
2017-01-16Merge branch 'rcu/urgent' of ↵Ingo Molnar8-39/+104
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into rcu/urgent Pull an urgent RCU fix from Paul E. McKenney: "This series contains a pair of commits that permit RCU synchronous grace periods (synchronize_rcu() and friends) to work correctly throughout boot. This eliminates the current "dead time" starting when the scheduler spawns its first taks and ending when the last of RCU's kthreads is spawned (this last happens during early_initcall() time). Although RCU's synchronous grace periods have long been documented as not working during this time, prior to 4.9, the expedited grace periods worked by accident, and some ACPI code came to rely on this unintentional behavior. (Note that this unintentional behavior was -not- reliable. For example, failures from ACPI could occur on !SMP systems and on systems booting with the rcu_normal kernel boot parameter.) Either way, there is a bug that needs fixing, and the 4.9 switch of RCU's expedited grace periods to workqueues could be considered to have caused a regression. This series therefore makes RCU's expedited grace periods operate correctly throughout the boot process. This has been demonstrated to fix the problems ACPI was encountering, and has the added longer-term benefit of simplifying RCU's behavior." Signed-off-by: Ingo Molnar <[email protected]>
2017-01-16s390: update defconfigsHeiko Carstens4-48/+67
Signed-off-by: Heiko Carstens <[email protected]>
2017-01-16s390/ctl_reg: make __ctl_load a full memory barrierHeiko Carstens1-1/+3
We have quite a lot of code that depends on the order of the __ctl_load inline assemby and subsequent memory accesses, like e.g. disabling lowcore protection and the writing to lowcore. Since the __ctl_load macro does not have memory barrier semantics, nor any other dependencies the compiler is, theoretically, free to shuffle code around. Or in other words: storing to lowcore could happen before lowcore protection is disabled. In order to avoid this class of potential bugs simply add a full memory barrier to the __ctl_load macro. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-01-15Merge tag 'mac80211-for-davem-2017-01-13' of ↵David S. Miller10-38/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a number of fixes, in part because I was late in actually sending them out - will try to do better in the future: * handle VHT opmode properly when hostapd is controlling full station state * two fixes for minimum channel width in mac80211 * don't leave SMPS set to junk in HT capabilities * fix headroom when forwarding mesh packets, recently broken by another fix that failed to take into account frame encryption * fix the TID in null-data packets indicating EOSP (end of service period) in U-APSD * prevent attempting to use (and then failing which results in crashes) TXQs on stations that aren't added to the driver yet ==================== Signed-off-by: David S. Miller <[email protected]>
2017-01-15openvswitch: maintain correct checksum state in conntrack actionsLance Richardson1-2/+4
When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] <IRQ> [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Lance Richardson <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-15Linux 4.10-rc4Linus Torvalds1-1/+1
2017-01-15Merge branch 'for-linus' of ↵Linus Torvalds5-27/+60
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This tree contains 4 fixes. The first is a fix for a race that can causes oopses under the right circumstances, and that someone just recently encountered. Past that are several small trivial correct fixes. A real issue that was blocking development of an out of tree driver, but does not appear to have caused any actual problems for in-tree code. A potential deadlock that was reported by lockdep. And a deadlock people have experienced and took the time to track down caused by a cleanup that removed the code to drop a reference count" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Drop reference added by grab_header in proc_sys_readdir pid: fix lockdep deadlock warning due to ucount_lock libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount mnt: Protect the mountpoint hashtable with mount_lock
2017-01-15Merge tag 'char-misc-4.10-rc4' of ↵Linus Torvalds10-16/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 4.10-rc4 that resolve some reported issues. The MEI driver issue resolves a lot of problems that people have been having, as does the mem driver fix. The other minor fixes resolve other reported issues. All of these have been in linux-next for a while" * tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: vme: Fix wrong pointer utilization in ca91cx42_slave_get auxdisplay: fix new ht16k33 build errors ppdev: don't print a free'd string extcon: return error code on failure drivers: char: mem: Fix thinkos in kmem address checks mei: bus: enable OS version only for SPT and newer
2017-01-15Merge tag 'driver-core-4.10-rc4' of ↵Linus Torvalds4-34/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single patch being reverted to remove a feature that was added in 4.10-rc1 that isn't quite ready for release. It will be redone as a debugfs file instead of a sysfs file in the future" * tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver core: Add deferred_probe attribute to devices in sysfs"
2017-01-15Merge tag 'tty-4.10-rc4' of ↵Linus Torvalds5-17/+25
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a number of reported issues. Nothing major here at all, one revert of a problematic patch, and some other tiny bugfixes. Full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: sysrq: attach sysrq handler correctly for 32-bit kernel Revert "tty: serial: 8250: add CON_CONSDEV to flags" Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break 8250_pci: Fix potential use-after-free in error path tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
2017-01-15Merge tag 'usb-4.10-rc4' of ↵Linus Torvalds6-66/+98
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 4.10-rc4 to resolve some reported issues. The "largest" here is a number of bugs being fixed in the ch341 usb-serial driver, to hopefully resolve the mess of different devices floating around that use this driver that have been having problems with the 4.10-rc1 release. There's also a tiny musb fix that I missed in the last pull request, as well as the traditional xhci fix rounding out the batch. All have been in linux-next with no reported issues" * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: fix deadlock at host remove by running watchdog correctly USB: serial: ch341: fix control-message error handling usb: musb: fix runtime PM in debugfs wusbcore: Fix one more crypto-on-the-stack bug USB: serial: kl5kusb105: fix line-state error handling USB: serial: ch341: fix baud rate and line-control handling USB: serial: ch341: fix line settings after reset-resume USB: serial: ch341: fix resume after reset USB: serial: ch341: fix open error handling USB: serial: ch341: fix modem-control and B0 handling USB: serial: ch341: fix open and resume after B0 USB: serial: ch341: fix initial modem-control state
2017-01-15Merge branch 'i2c/for-current' of ↵Linus Torvalds5-12/+42
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Bugfixes for I2C. Mostly core this time which is a bit unusual but nothing really scary in there" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Avoid race conditions with IMC i2c: fix spelling mistake: "insufficent" -> "insufficient" i2c: print correct device invalid address i2c: do not enable fall back to Host Notify by default i2c: fix kernel memory disclosure in dev interface
2017-01-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds18-100/+129
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - unwinder fixes - AMD CPU topology enumeration fixes - microcode loader fixes - x86 embedded platform fixes - fix for a bootup crash that may trigger when clearcpuid= is used with invalid values" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Use compatible types in comparison to fix sparse error x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() x86/entry: Fix the end of the stack for newly forked tasks x86/unwind: Include __schedule() in stack traces x86/unwind: Disable KASAN checks for non-current tasks x86/unwind: Silence warnings for non-current tasks x86/microcode/intel: Use correct buffer size for saving microcode data x86/microcode/intel: Fix allocation size of struct ucode_patch x86/microcode/intel: Add a helper which gives the microcode revision x86/microcode: Use native CPUID to tickle out microcode revision x86/CPU: Add native CPUID variants returning a single datum x86/boot: Add missing declaration of string functions x86/CPU/AMD: Fix Bulldozer topology x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' x86/cpu: Fix typo in the comment for Anniedale x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
2017-01-15Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NOHZ fix from Ingo Molnar: "This fixes an old NOHZ race where we incorrectly calculate the next timer interrupt in certain circumstances where hrtimers are pending, that can cause hard to reproduce stalled-values artifacts in /proc/stat" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Fix collision between tick and other hrtimers
2017-01-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds20-92/+257
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
2017-01-15Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds7-43/+165
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "A number of regression fixes: - Fix a boot hang on machines that have somewhat unusual memory map entries of phys_addr=0x0 num_pages=0, which broke due to a recent commit. This commit got cherry-picked from the v4.11 queue because the bug is affecting real machines. - Fix a boot hang also reported by KASAN, caused by incorrect init ordering introduced by a recent optimization. - Fix a recent robustification fix to allocate_new_fdt_and_exit_boot() that introduced an invalid assumption. Neither bugs were seen in the wild AFAIK" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Prune invalid memory map entries and fix boot regression x86/efi: Don't allocate memmap through memblock after mm_init() efi/libstub/arm*: Pass latest memory map to the kernel
2017-01-15swiotlb: ensure that page-sized mappings are page-alignedNikita Yushchenko1-3/+3
Some drivers do depend on page mappings to be page aligned. Swiotlb already enforces such alignment for mappings greater than page, extend that to page-sized mappings as well. Without this fix, nvme hits BUG() in nvme_setup_prps(), because that routine assumes page-aligned mappings. Signed-off-by: Nikita Yushchenko <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2017-01-14rcu: Narrow early boot window of illegal synchronous grace periodsPaul E. McKenney7-35/+104
The current preemptible RCU implementation goes through three phases during bootup. In the first phase, there is only one CPU that is running with preemption disabled, so that a no-op is a synchronous grace period. In the second mid-boot phase, the scheduler is running, but RCU has not yet gotten its kthreads spawned (and, for expedited grace periods, workqueues are not yet running. During this time, any attempt to do a synchronous grace period will hang the system (or complain bitterly, depending). In the third and final phase, RCU is fully operational and everything works normally. This has been OK for some time, but there has recently been some synchronous grace periods showing up during the second mid-boot phase. This code worked "by accident" for awhile, but started failing as soon as expedited RCU grace periods switched over to workqueues in commit 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue"). Note that the code was buggy even before this commit, as it was subject to failure on real-time systems that forced all expedited grace periods to run as normal grace periods (for example, using the rcu_normal ksysfs parameter). The callchain from the failure case is as follows: early_amd_iommu_init() |-> acpi_put_table(ivrs_base); |-> acpi_tb_put_table(table_desc); |-> acpi_tb_invalidate_table(table_desc); |-> acpi_tb_release_table(...) |-> acpi_os_unmap_memory |-> acpi_os_unmap_iomem |-> acpi_os_map_cleanup |-> synchronize_rcu_expedited The kernel showing this callchain was built with CONFIG_PREEMPT_RCU=y, which caused the code to try using workqueues before they were initialized, which did not go well. This commit therefore reworks RCU to permit synchronous grace periods to proceed during this mid-boot phase. This commit is therefore a fix to a regression introduced in v4.9, and is therefore being put forward post-merge-window in v4.10. This commit sets a flag from the existing rcu_scheduler_starting() function which causes all synchronous grace periods to take the expedited path. The expedited path now checks this flag, using the requesting task to drive the expedited grace period forward during the mid-boot phase. Finally, this flag is updated by a core_initcall() function named rcu_exp_runtime_mode(), which causes the runtime codepaths to be used. Note that this arrangement assumes that tasks are not sent POSIX signals (or anything similar) from the time that the first task is spawned through core_initcall() time. Fixes: 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue") Reported-by: "Zheng, Lv" <[email protected]> Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Tested-by: Stan Kain <[email protected]> Tested-by: Ivan <[email protected]> Tested-by: Emanuel Castelo <[email protected]> Tested-by: Bruno Pesavento <[email protected]> Tested-by: Borislav Petkov <[email protected]> Tested-by: Frederic Bezies <[email protected]> Cc: <[email protected]> # 4.9.0-
2017-01-14rcu: Remove cond_resched() from Tiny synchronize_sched()Paul E. McKenney1-4/+0
It is now legal to invoke synchronize_sched() at early boot, which causes Tiny RCU's synchronize_sched() to emit spurious splats. This commit therefore removes the cond_resched() from Tiny RCU's synchronize_sched(). Fixes: 8b355e3bc140 ("rcu: Drive expedited grace periods from workqueue") Signed-off-by: Paul E. McKenney <[email protected]> Cc: <[email protected]> # 4.9.0-
2017-01-14Merge branch 'for-linus' of ↵Linus Torvalds6-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro. The most notable fix here is probably the fix for a splice regression ("fix a fencepost error in pipe_advance()") noticed by Alan Wylie. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a fencepost error in pipe_advance() coredump: Ensure proper size of sparse core files aio: fix lock dep warning tmpfs: clear S_ISGID when setting posix ACLs
2017-01-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds16-83/+66
Pull block fixes from Jens Axboe: - the virtio_blk stack DMA corruption fix from Christoph, fixing and issue with VMAP stacks. - O_DIRECT blkbits calculation fix from Chandan. - discard regression fix from Christoph. - queue init error handling fixes for nbd and virtio_blk, from Omar and Jeff. - two small nvme fixes, from Christoph and Guilherme. - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead, to more closely follow what we do in other places in the block layer. This interface is new for this series, so let's get the naming right before releasing a kernel with this feature. From Damien. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't try to discard from __blkdev_issue_zeroout sd: remove __data_len hack for WRITE SAME nvme: use blk_rq_payload_bytes scsi: use blk_rq_payload_bytes block: add blk_rq_payload_bytes block: Rename blk_queue_zone_size and bdev_zone_size nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too nvme-rdma: fix nvme_rdma_queue_is_ready virtio_blk: fix panic in initialization error path nbd: blk_mq_init_queue returns an error code on failure, not NULL virtio_blk: avoid DMA to stack for the sense buffer do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned
2017-01-14fix a fencepost error in pipe_advance()Al Viro1-23/+31
The logics in pipe_advance() used to release all buffers past the new position failed in cases when the number of buffers to release was equal to pipe->buffers. If that happened, none of them had been released, leaving pipe full. Worse, it was trivial to trigger and we end up with pipe full of uninitialized pages. IOW, it's an infoleak. Cc: [email protected] # v4.9 Reported-by: "Alan J. Wylie" <[email protected]> Tested-by: "Alan J. Wylie" <[email protected]> Signed-off-by: Al Viro <[email protected]>
2017-01-14coredump: Ensure proper size of sparse core filesDave Kleikamp3-0/+20
If the last section of a core file ends with an unmapped or zero page, the size of the file does not correspond with the last dump_skip() call. gdb complains that the file is truncated and can be confusing to users. After all of the vma sections are written, make sure that the file size is no smaller than the current file position. This problem can be demonstrated with gdb's bigcore testcase on the sparc architecture. Signed-off-by: Dave Kleikamp <[email protected]> Cc: Alexander Viro <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Al Viro <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.