aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-21tools/build: tweak unused value workaroundGeorge Burgess IV1-1/+1
Clang has -Wself-assign enabled by default under -Wall, which always gets -Werror'ed on this file, causing sync-compare-and-swap to be disabled by default. The generally-accepted way to spell "this value is intentionally unused," is casting it to `void`. This is accepted by both GCC and Clang with -Wall enabled: https://godbolt.org/z/qqZ9r3 Signed-off-by: George Burgess IV <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Nick Desaulniers <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21checkpatch: fix a typo in the regex for $allocFunctionsChristophe JAILLET1-1/+1
Here, we look for function such as 'netdev_alloc_skb_ip_align', so a '_' is missing in the regex. To make sure: grep -r --include=*.c skbip_a * | wc ==> 0 results grep -r --include=*.c skb_ip_a * | wc ==> 112 results Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Joe Perches <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21mm, gup: return EINTR when gup is interrupted by fatal signalsMichal Hocko1-1/+1
EINTR is the usual error code which other killable interfaces return. This is the case for the other fatal_signal_pending break out from the same function. Make the code consistent. ERESTARTSYS is also quite confusing because the signal is fatal and so no restart will happen before returning to the userspace. Signed-off-by: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: Linus Torvalds <[email protected]> Cc: Peter Xu <[email protected]> Cc: Hillf Danton <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21mm/hugetlb: fix a addressing exception caused by huge_pte_offsetLongpeng1-6/+8
Our machine encountered a panic(addressing exception) after run for a long time and the calltrace is: RIP: hugetlb_fault+0x307/0xbe0 RSP: 0018:ffff9567fc27f808 EFLAGS: 00010286 RAX: e800c03ff1258d48 RBX: ffffd3bb003b69c0 RCX: e800c03ff1258d48 RDX: 17ff3fc00eda72b7 RSI: 00003ffffffff000 RDI: e800c03ff1258d48 RBP: ffff9567fc27f8c8 R08: e800c03ff1258d48 R09: 0000000000000080 R10: ffffaba0704c22a8 R11: 0000000000000001 R12: ffff95c87b4b60d8 R13: 00005fff00000000 R14: 0000000000000000 R15: ffff9567face8074 FS: 00007fe2d9ffb700(0000) GS:ffff956900e40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffd3bb003b69c0 CR3: 000000be67374000 CR4: 00000000003627e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: follow_hugetlb_page+0x175/0x540 __get_user_pages+0x2a0/0x7e0 __get_user_pages_unlocked+0x15d/0x210 __gfn_to_pfn_memslot+0x3c5/0x460 [kvm] try_async_pf+0x6e/0x2a0 [kvm] tdp_page_fault+0x151/0x2d0 [kvm] ... kvm_arch_vcpu_ioctl_run+0x330/0x490 [kvm] kvm_vcpu_ioctl+0x309/0x6d0 [kvm] do_vfs_ioctl+0x3f0/0x540 SyS_ioctl+0xa1/0xc0 system_call_fastpath+0x22/0x27 For 1G hugepages, huge_pte_offset() wants to return NULL or pudp, but it may return a wrong 'pmdp' if there is a race. Please look at the following code snippet: ... pud = pud_offset(p4d, addr); if (sz != PUD_SIZE && pud_none(*pud)) return NULL; /* hugepage or swap? */ if (pud_huge(*pud) || !pud_present(*pud)) return (pte_t *)pud; pmd = pmd_offset(pud, addr); if (sz != PMD_SIZE && pmd_none(*pmd)) return NULL; /* hugepage or swap? */ if (pmd_huge(*pmd) || !pmd_present(*pmd)) return (pte_t *)pmd; ... The following sequence would trigger this bug: - CPU0: sz = PUD_SIZE and *pud = 0 , continue - CPU0: "pud_huge(*pud)" is false - CPU1: calling hugetlb_no_page and set *pud to xxxx8e7(PRESENT) - CPU0: "!pud_present(*pud)" is false, continue - CPU0: pmd = pmd_offset(pud, addr) and maybe return a wrong pmdp However, we want CPU0 to return NULL or pudp in this case. We must make sure there is exactly one dereference of pud and pmd. Signed-off-by: Longpeng <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Mike Kravetz <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Sean Christopherson <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21MAINTAINERS: add an entry for kfifoBartosz Golaszewski1-0/+7
Kfifo has been written by Stefani Seibold and she's implicitly expected to Ack any changes to it. She's not however officially listed as kfifo maintainer which leads to delays in patch review. This patch proposes to add an explitic entry for kfifo to MAINTAINERS file. [[email protected]: alphasort F: entries, per Joe] [[email protected]: remove colon, per Bartosz] Link: http://lkml.kernel.org/r/[email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Stefani Seibold <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Joe Perches <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21mm/userfaultfd: disable userfaultfd-wp on x86_32Peter Xu1-1/+1
Userfaultfd-wp is not yet working on 32bit hosts, but it's accidentally enabled previously. Disable it. Fixes: 5a281062af1d ("userfaultfd: wp: add WP pagetable tracking to x86") Reported-by: Naresh Kamboju <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Peter Xu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Naresh Kamboju <[email protected]> Reviewed-by: Andrea Arcangeli <[email protected]> Cc: Hillf Danton <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21slub: avoid redzone when choosing freepointer locationKees Cook1-2/+10
Marco Elver reported system crashes when booting with "slub_debug=Z". The freepointer location (s->offset) was not taking into account that the "inuse" size that includes the redzone area should not be used by the freelist pointer. Change the calculation to save the area of the object that an inline freepointer may be written into. Fixes: 3202fa62fb43 ("slub: relocate freelist pointer to middle of object") Reported-by: Marco Elver <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Tested-by: Marco Elver <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Link: http://lkml.kernel.org/r/202004151054.BD695840@keescook Link: https://lore.kernel.org/linux-mm/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21sh: fix build error in mm/init.cMasahiro Yamada1-1/+1
The closing parenthesis is missing. Fixes: bfeb022f8fe4 ("mm/memory_hotplug: add pgprot_t to mhp_params") Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-04-21block: remove unused headerMa, Jianpeng1-1/+0
Dax related code already removed from this file. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jianpeng Ma <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-21blk-iocost: Fix error on iocost_ioc_vrate_adjWaiman Long2-5/+5
Systemtap 4.2 is unable to correctly interpret the "u32 (*missed_ppm)[2]" argument of the iocost_ioc_vrate_adj trace entry defined in include/trace/events/iocost.h leading to the following error: /tmp/stapAcz0G0/stap_c89c58b83cea1724e26395efa9ed4939_6321_aux_6.c:78:8: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token , u32[]* __tracepoint_arg_missed_ppm That argument type is indeed rather complex and hard to read. Looking at block/blk-iocost.c. It is just a 2-entry u32 array. By simplifying the argument to a simple "u32 *missed_ppm" and adjusting the trace entry accordingly, the compilation error was gone. Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Acked-by: Steven Rostedt (VMware) <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-21cifs: protect updating server->dstaddr with a spinlockRonnie Sahlberg1-0/+2
We use a spinlock while we are reading and accessing the destination address for a server. We need to also use this spinlock to protect when we are modifying this address from reconn_set_ipaddr(). Signed-off-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Steve French <[email protected]>
2020-04-21signal: Avoid corrupting si_pid and si_uid in do_notify_parentEric W. Biederman1-1/+5
Christof Meerwald <[email protected]> writes: > Hi, > > this is probably related to commit > 7a0cf094944e2540758b7f957eb6846d5126f535 (signal: Correct namespace > fixups of si_pid and si_uid). > > With a 5.6.5 kernel I am seeing SIGCHLD signals that don't include a > properly set si_pid field - this seems to happen for multi-threaded > child processes. > > A simple test program (based on the sample from the signalfd man page): > > #include <sys/signalfd.h> > #include <signal.h> > #include <unistd.h> > #include <spawn.h> > #include <stdlib.h> > #include <stdio.h> > > #define handle_error(msg) \ > do { perror(msg); exit(EXIT_FAILURE); } while (0) > > int main(int argc, char *argv[]) > { > sigset_t mask; > int sfd; > struct signalfd_siginfo fdsi; > ssize_t s; > > sigemptyset(&mask); > sigaddset(&mask, SIGCHLD); > > if (sigprocmask(SIG_BLOCK, &mask, NULL) == -1) > handle_error("sigprocmask"); > > pid_t chldpid; > char *chldargv[] = { "./sfdclient", NULL }; > posix_spawn(&chldpid, "./sfdclient", NULL, NULL, chldargv, NULL); > > sfd = signalfd(-1, &mask, 0); > if (sfd == -1) > handle_error("signalfd"); > > for (;;) { > s = read(sfd, &fdsi, sizeof(struct signalfd_siginfo)); > if (s != sizeof(struct signalfd_siginfo)) > handle_error("read"); > > if (fdsi.ssi_signo == SIGCHLD) { > printf("Got SIGCHLD %d %d %d %d\n", > fdsi.ssi_status, fdsi.ssi_code, > fdsi.ssi_uid, fdsi.ssi_pid); > return 0; > } else { > printf("Read unexpected signal\n"); > } > } > } > > > and a multi-threaded client to test with: > > #include <unistd.h> > #include <pthread.h> > > void *f(void *arg) > { > sleep(100); > } > > int main() > { > pthread_t t[8]; > > for (int i = 0; i != 8; ++i) > { > pthread_create(&t[i], NULL, f, NULL); > } > } > > I tried to do a bit of debugging and what seems to be happening is > that > > /* From an ancestor pid namespace? */ > if (!task_pid_nr_ns(current, task_active_pid_ns(t))) { > > fails inside task_pid_nr_ns because the check for "pid_alive" fails. > > This code seems to be called from do_notify_parent and there we > actually have "tsk != current" (I am assuming both are threads of the > current process?) I instrumented the code with a warning and received the following backtrace: > WARNING: CPU: 0 PID: 777 at kernel/pid.c:501 __task_pid_nr_ns.cold.6+0xc/0x15 > Modules linked in: > CPU: 0 PID: 777 Comm: sfdclient Not tainted 5.7.0-rc1userns+ #2924 > Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 > RIP: 0010:__task_pid_nr_ns.cold.6+0xc/0x15 > Code: ff 66 90 48 83 ec 08 89 7c 24 04 48 8d 7e 08 48 8d 74 24 04 e8 9a b6 44 00 48 83 c4 08 c3 48 c7 c7 59 9f ac 82 e8 c2 c4 04 00 <0f> 0b e9 3fd > RSP: 0018:ffffc9000042fbf8 EFLAGS: 00010046 > RAX: 000000000000000c RBX: 0000000000000000 RCX: ffffc9000042faf4 > RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81193d29 > RBP: ffffc9000042fc18 R08: 0000000000000000 R09: 0000000000000001 > R10: 000000100f938416 R11: 0000000000000309 R12: ffff8880b941c140 > R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880b941c140 > FS: 0000000000000000(0000) GS:ffff8880bca00000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00007f2e8c0a32e0 CR3: 0000000002e10000 CR4: 00000000000006f0 > Call Trace: > send_signal+0x1c8/0x310 > do_notify_parent+0x50f/0x550 > release_task.part.21+0x4fd/0x620 > do_exit+0x6f6/0xaf0 > do_group_exit+0x42/0xb0 > get_signal+0x13b/0xbb0 > do_signal+0x2b/0x670 > ? __audit_syscall_exit+0x24d/0x2b0 > ? rcu_read_lock_sched_held+0x4d/0x60 > ? kfree+0x24c/0x2b0 > do_syscall_64+0x176/0x640 > ? trace_hardirqs_off_thunk+0x1a/0x1c > entry_SYSCALL_64_after_hwframe+0x49/0xb3 The immediate problem is as Christof noticed that "pid_alive(current) == false". This happens because do_notify_parent is called from the last thread to exit in a process after that thread has been reaped. The bigger issue is that do_notify_parent can be called from any process that manages to wait on a thread of a multi-threaded process from wait_task_zombie. So any logic based upon current for do_notify_parent is just nonsense, as current can be pretty much anything. So change do_notify_parent to call __send_signal directly. Inspecting the code it appears this problem has existed since the pid namespace support started handling this case in 2.6.30. This fix only backports to 7a0cf094944e ("signal: Correct namespace fixups of si_pid and si_uid") where the problem logic was moved out of __send_signal and into send_signal. Cc: [email protected] Fixes: 6588c1e3ff01 ("signals: SI_USER: Masquerade si_pid when crossing pid ns boundary") Ref: 921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals") Link: https://lore.kernel.org/lkml/[email protected]/ Reported-by: Christof Meerwald <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]>
2020-04-21arm64: sync kernel APIAKey when installingMark Rutland1-3/+6
A direct write to a APxxKey_EL1 register requires a context synchronization event to ensure that indirect reads made by subsequent instructions (e.g. AUTIASP, PACIASP) observe the new value. When we initialize the boot task's APIAKey in boot_init_stack_canary() via ptrauth_keys_switch_kernel() we miss the necessary ISB, and so there is a window where instructions are not guaranteed to use the new APIAKey value. This has been observed to result in boot-time crashes where PACIASP and AUTIASP within a function used a mixture of the old and new key values. Fix this by having ptrauth_keys_switch_kernel() synchronize the new key value with an ISB. At the same time, __ptrauth_key_install() is renamed to __ptrauth_key_install_nosync() so that it is obvious that this performs no synchronization itself. Fixes: 28321582334c261c ("arm64: initialize ptrauth keys for kernel booting task") Signed-off-by: Mark Rutland <[email protected]> Reported-by: Will Deacon <[email protected]> Cc: Amit Daniel Kachhap <[email protected]> Cc: Marc Zyngier <[email protected]> Signed-off-by: Catalin Marinas <[email protected]> Tested-by: Will Deacon <[email protected]>
2020-04-21ASoC: wm8960: Fix wrong clock after suspend & resumeShengjiu Wang1-2/+1
After suspend & resume, wm8960_hw_params may be called when bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking is not called. But if sample rate is changed at that time, then the output clock rate will be not correct. So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params is not necessary and it causes above issue. Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function") Signed-off-by: Shengjiu Wang <[email protected]> Acked-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-04-21xhci: Don't clear hub TT buffer on ep0 protocol stallMathias Nyman1-5/+11
The default control endpoint ep0 can return a STALL indicating the device does not support the control transfer requests. This is called a protocol stall and does not halt the endpoint. xHC behaves a bit different. Its internal endpoint state will always be halted on any stall, even if the device side of the endpiont is not halted. So we do need to issue the reset endpoint command to clear the xHC host intenal endpoint halt state, but should not request the HS hub to clear the TT buffer unless device side of endpoint is halted. Clearing the hub TT buffer at protocol stall caused ep0 to become unresponsive for some FS/LS devices behind HS hubs, and class drivers failed to set the interface due to timeout: usb 1-2.1: 1:1: usb_set_interface failed (-110) Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Cc: <[email protected]> # v5.3 Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-21xhci: prevent bus suspend if a roothub port detected a over-current conditionMathias Nyman1-0/+9
Suspending the bus and host controller while a port is in a over-current condition may halt the host. Also keep the roothub running if over-current is active. Cc: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-21xhci: Fix handling halted endpoint even if endpoint ring appears emptyMathias Nyman3-10/+39
If a class driver cancels its only URB then the endpoint ring buffer will appear empty to the xhci driver. xHC hardware may still process cached TRBs, and complete with a STALL, halting the endpoint. This halted endpoint was not handled correctly by xhci driver as events on empty rings were all assumed to be spurious events. xhci driver refused to restart the ring with EP_HALTED flag set, so class driver was never informed the endpoint halted even if it queued new URBs. The host side of the endpoint needs to be reset, and dequeue pointer should be moved in order to clear the cached TRBs and resetart the endpoint. Small adjustments in finding the new dequeue pointer are needed to support the case of stall on an empty ring and unknown current TD. Cc: <[email protected]> cc: Jeremy Compostella <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-21Merge tag 'kvm-ppc-fixes-5.7-1' of ↵Paolo Bonzini2-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.7 - Fix a regression introduced in the last merge window, which results in guests in HPT mode dying randomly.
2020-04-21Merge tag 'kvm-s390-master-5.7-2' of ↵Paolo Bonzini4691-69328/+184205
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fix for 5.7 and maintainer update - Silence false positive lockdep warning - add Claudio as reviewer
2020-04-21MAINTAINERS: update mt76 reviewersRyder Lee1-1/+0
Roy no longer works here. Time to say goodbye, my friend. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/c171e0dfce9f2dad5ca6935eaf6004117f82e259.1587195398.git.ryder.lee@mediatek.com
2020-04-21iwlwifi: fix WGDS check when WRDS is disabledLuca Coelho2-16/+18
In the reference BIOS implementation, WRDS can be disabled without disabling WGDS. And this happens in most cases where WRDS is disabled, causing the WGDS without WRDS check and issue an error. To avoid this issue, we change the check so that we only considered it an error if the WRDS entry doesn't exist. If the entry (or the selected profile is disabled for any other reason), we just silently ignore WGDS. Cc: [email protected] # 4.14+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205513 Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417133700.72ad25c3998b.I875d935cefd595ed7f640ddcfc7bc802627d2b7f@changeid
2020-04-21iwlwifi: mvm: fix inactive TID removal return value usageJohannes Berg1-2/+2
The function iwl_mvm_remove_inactive_tids() returns bool, so we should just check "if (ret)", not "if (ret >= 0)" (which would do nothing useful here). We obviously therefore cannot use the return value of the function for the free_queue, we need to use the queue (i) we're currently dealing with instead. Cc: [email protected] # v5.4+ Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.9d862ed72535.I9e27ccc3ee3c8855fc13682592b571581925dfbd@changeid
2020-04-21iwlwifi: mvm: Do not declare support for ACK Enabled AggregationIlan Peer1-4/+2
As this was not supposed to be enabled to begin with. Cc: [email protected] # v4.19+ Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.53dbc3c6c36b.Idfe118546b92cc31548b2211472a5303c7de5909@changeid
2020-04-21iwlwifi: mvm: limit maximum queue appropriatelyJohannes Berg2-3/+8
Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use #31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: [email protected] # v4.9+ Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
2020-04-21iwlwifi: pcie: indicate correct RB size to deviceJohannes Berg1-4/+14
In the context info, we need to indicate the correct RB size to the device so that it will not think we have 4k when we only use 2k. This seems to not have caused any issues right now, likely because the hardware no longer supports putting multiple entries into a single RB, and practically all of the entries should be smaller than 2k. Nevertheless, it's a bug, and we must advertise the right size to the device. Note that right now we can only tell it 2k vs. 4k, so for the cases where we have more, still use 4k. This needs to be fixed by the firmware first. Signed-off-by: Johannes Berg <[email protected]> Fixes: cfdc20efebdc ("iwlwifi: pcie: use partial pages if applicable") Cc: [email protected] # v5.6 Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.ae6cd345764f.I0985c55223decf70182b9ef1d8edf4179f537853@changeid
2020-04-21iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein1-2/+11
We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: [email protected] # v4.19+ Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid
2020-04-21iwlwifi: pcie: actually release queue memory in TVQMJohannes Berg1-0/+3
The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by: Johannes Berg <[email protected]> Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management") Cc: [email protected] # v4.14+ Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid
2020-04-21Merge tag 'zynqmp-soc-for-v5.7-rc3' of https://github.com/Xilinx/linux-xlnx ↵Arnd Bergmann2-3/+3
into arm/fixes arm64: soc: ZynqMP SoC fixes for v5.7 - Fix firmware driver dependency - Fix one spare warning in firmware driver * tag 'zynqmp-soc-for-v5.7-rc3' of https://github.com/Xilinx/linux-xlnx: firmware: xilinx: make firmware_debugfs_root static drivers: soc: xilinx: fix firmware driver Kconfig dependency Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-04-21powerpc/setup_64: Set cache-line-size based on cache-block-sizeChris Packham1-0/+2
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74f269 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: [email protected] # v4.11+ Signed-off-by: Chris Packham <[email protected]> Reported-by: Qian Cai <[email protected]> [mpe: Add even more detail to change log] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-04-21iwlwifi: actually check allocated conf_tlv pointerChris Rorvick1-1/+1
Commit 71bc0334a637 ("iwlwifi: check allocated pointer when allocating conf_tlvs") attempted to fix a typoe introduced by commit 17b809c9b22e ("iwlwifi: dbg: move debug data to a struct") but does not implement the check correctly. Fixes: 71bc0334a637 ("iwlwifi: check allocated pointer when allocating conf_tlvs") Tweeted-by: @grsecurity Signed-off-by: Chris Rorvick <[email protected]> Signed-off-by: Sedat Dilek <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-04-21ALSA: usx2y: Fix potential NULL dereferenceTakashi Iwai1-0/+2
The error handling code in usX2Y_rate_set() may hit a potential NULL dereference when an error occurs before allocating all us->urb[]. Add a proper NULL check for fixing the corner case. Reported-by: Lin Yi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-21ALSA: usb-audio: Add quirk for Focusrite Scarlett 2i2Gregor Pintar2-84/+13
Force it to use asynchronous playback. Same quirk has already been added for Focusrite Scarlett Solo (2nd gen) with a commit 46f5710f0b88 ("ALSA: usb-audio: Add quirk for Focusrite Scarlett Solo"). This also seems to prevent regular clicks when playing at 44100Hz on Scarlett 2i2 (2nd gen). I did not notice any side effects. Moved both quirks to snd_usb_audioformat_attributes_quirk() as suggested. Signed-off-by: Gregor Pintar <[email protected]> Reviewed-by: Alexander Tsoy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-20bpf, selftests: Add test for BPF_STX BPF_B storing R10Luke Nelson1-0/+40
This patch adds a test to test_verifier that writes the lower 8 bits of R10 (aka FP) using BPF_B to an array map and reads the result back. The expected behavior is that the result should be the same as first copying R10 to R9, and then storing / loading the lower 8 bits of R9. This test catches a bug that was present in the x86-64 JIT that caused an incorrect encoding for BPF_STX BPF_B when the source operand is R10. Signed-off-by: Xi Wang <[email protected]> Signed-off-by: Luke Nelson <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-20bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_BLuke Nelson1-3/+15
This patch fixes an encoding bug in emit_stx for BPF_B when the source register is BPF_REG_FP. The current implementation for BPF_STX BPF_B in emit_stx saves one REX byte when the operands can be encoded using Mod-R/M alone. The lower 8 bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers, (e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit equivalents (%sil, %dil, %bpl, %spl). The current code checks if the source for BPF_STX BPF_B is BPF_REG_1 or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the required REX prefix. However, it misses the case when the source is BPF_REG_FP (mapped to %rbp). The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand will read from register %ch instead of the correct %bpl. This patch fixes the problem by fixing and refactoring the check on which registers need the extra REX byte. Since no BPF registers map to %rsp, there is no need to handle %spl. Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT") Signed-off-by: Xi Wang <[email protected]> Signed-off-by: Luke Nelson <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-20bpf: Fix handling of XADD on BTF memoryJann Horn1-1/+1
check_xadd() can cause check_ptr_to_btf_access() to be executed with atype==BPF_READ and value_regno==-1 (meaning "just check whether the access is okay, don't tell me what type it will result in"). Handle that case properly and skip writing type information, instead of indexing into the registers at index -1 and writing into out-of-bounds memory. Note that at least at the moment, you can't actually write through a BTF pointer, so check_xadd() will reject the program after calling check_ptr_to_btf_access with atype==BPF_WRITE; but that's after the verifier has already corrupted memory. This patch assumes that BTF pointers are not available in unprivileged programs. Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-20bpf: Forbid XADD on spilled pointers for unprivileged usersJann Horn2-9/+20
When check_xadd() verifies an XADD operation on a pointer to a stack slot containing a spilled pointer, check_stack_read() verifies that the read, which is part of XADD, is valid. However, since the placeholder value -1 is passed as `value_regno`, check_stack_read() can only return a binary decision and can't return the type of the value that was read. The intent here is to verify whether the value read from the stack slot may be used as a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and the type information is lost when check_stack_read() returns, this is not enforced, and a malicious user can abuse XADD to leak spilled kernel pointers. Fix it by letting check_stack_read() verify that the value is usable as a SCALAR_VALUE if no type information is passed to the caller. To be able to use __is_pointer_value() in check_stack_read(), move it up. Fix up the expected unprivileged error message for a BPF selftest that, until now, assumed that unprivileged users can use XADD on stack-spilled pointers. This also gives us a test for the behavior introduced in this patch for free. In theory, this could also be fixed by forbidding XADD on stack spills entirely, since XADD is a locked operation (for operations on memory with concurrency) and there can't be any concurrency on the BPF stack; but Alexei has said that he wants to keep XADD on stack slots working to avoid changes to the test suite [1]. The following BPF program demonstrates how to leak a BPF map pointer as an unprivileged user using this bug: // r7 = map_pointer BPF_LD_MAP_FD(BPF_REG_7, small_map), // r8 = launder(map_pointer) BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8), BPF_MOV64_IMM(BPF_REG_1, 0), ((struct bpf_insn) { .code = BPF_STX | BPF_DW | BPF_XADD, .dst_reg = BPF_REG_FP, .src_reg = BPF_REG_1, .off = -8 }), BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8), // store r8 into map BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7), BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP), BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4), BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0), BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1), BPF_EXIT_INSN(), BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0), BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN() [1] https://lore.kernel.org/bpf/[email protected]/ Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-20cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabledToke Høiland-Jørgensen1-1/+1
When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This happens because in this configuration, NR_CPUS can be larger than nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient to guard against hitting the warning in cpumask_check(). Fix this by explicitly checking the supplied key against the nr_cpumask_bits variable before calling cpu_possible(). Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Reported-by: Xiumei Mu <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: Xiumei Mu <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-04-21KVM: PPC: Book3S HV: Handle non-present PTEs in page fault functionsPaul Mackerras2-8/+10
Since cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler", it's been possible in fairly rare circumstances to load a non-present PTE in kvmppc_book3s_hv_page_fault() when running a guest on a POWER8 host. Because that case wasn't checked for, we could misinterpret the non-present PTE as being a cache-inhibited PTE. That could mismatch with the corresponding hash PTE, which would cause the function to fail with -EFAULT a little further down. That would propagate up to the KVM_RUN ioctl() generally causing the KVM userspace (usually qemu) to fall over. This addresses the problem by catching that case and returning to the guest instead. For completeness, this fixes the radix page fault handler in the same way. For radix this didn't cause any obvious misbehaviour, because we ended up putting the non-present PTE into the guest's partition-scoped page tables, leading immediately to another hypervisor data/instruction storage interrupt, which would go through the page fault path again and fix things up. Fixes: cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler" Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1820402 Reported-by: David Gibson <[email protected]> Tested-by: David Gibson <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2020-04-20Merge tag 'mlx5-fixes-2020-04-20' of ↵David S. Miller8-24/+40
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2020-04-20 Signed-off-by: David S. Miller <[email protected]>
2020-04-20net/mlx5e: Get the latest values from counters in switchdev modeZhu Yanjun1-1/+6
In the switchdev mode, when running "cat /sys/class/net/NIC/statistics/tx_packets", the ppcnt register is accessed to get the latest values. But currently this command can not get the correct values from ppcnt. From firmware manual, before getting the 802_3 counters, the 802_3 data layout should be set to the ppcnt register. When the command "cat /sys/class/net/NIC/statistics/tx_packets" is run, before updating 802_3 data layout with ppcnt register, the monitor counters are tested. The test result will decide the 802_3 data layout is updated or not. Actually the monitor counters do not support to monitor rx/tx stats of 802_3 in switchdev mode. So the rx/tx counters change will not trigger monitor counters. So the 802_3 data layout will not be updated in ppcnt register. Finally this command can not get the latest values from ppcnt register with 802_3 data layout. Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats") Signed-off-by: Zhu Yanjun <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-20net/mlx5: Kconfig: convert imply usage to weak dependencySaeed Mahameed1-4/+4
MLX5_CORE uses the 'imply' keyword to depend on VXLAN, PTP_1588_CLOCK, MLXFW and PCI_HYPERV_INTERFACE. This was useful to force vxlan, ptp, etc.. to be reachable to mlx5 regardless of their config states. Due to the changes in the cited commit below, the semantics of 'imply' was changed to not force any restriction on the implied config. As a result of this change, the compilation of MLX5_CORE=y and VXLAN=m would result in undefined references, as VXLAN now would stay as 'm'. To fix this we change MLX5_CORE to have a weak dependency on these modules/configs and make sure they are reachable, by adding: depend on symbol || !symbol. For example: VXLAN=m MLX5_CORE=y, this will force MLX5_CORE to m Fixes: def2fbffe62c ("kconfig: allow symbols implied by y to become m") Signed-off-by: Saeed Mahameed <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Nicolas Pitre <[email protected]> Cc: Arnd Bergmann <[email protected]> Reported-by: Randy Dunlap <[email protected]>
2020-04-20net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overrunsMaxim Mikityanskiy4-5/+15
XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK ICOSQ. When the application floods the driver with wakeup requests by calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq, the XSK ICOSQ may overflow. Multiple NOPs are not required and won't accelerate the process, so avoid posting a second NOP if there is one already on the way. This way we also avoid increasing the queue size (which might not help anyway). Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-20net/mlx5: CT: Change idr to xarray to protect parallel tuple id allocationPaul Blakey1-11/+12
After allowing parallel tuple insertion, we get the following trace: [ 5505.142249] ------------[ cut here ]------------ [ 5505.148155] WARNING: CPU: 21 PID: 13313 at lib/radix-tree.c:581 delete_node+0x16c/0x180 [ 5505.295553] CPU: 21 PID: 13313 Comm: kworker/u50:22 Tainted: G OE 5.6.0+ #78 [ 5505.304824] Hardware name: Supermicro Super Server/X10DRT-P, BIOS 2.0b 03/30/2017 [ 5505.313740] Workqueue: nf_flow_table_offload flow_offload_work_handler [nf_flow_table] [ 5505.323257] RIP: 0010:delete_node+0x16c/0x180 [ 5505.349862] RSP: 0018:ffffb19184eb7b30 EFLAGS: 00010282 [ 5505.356785] RAX: 0000000000000000 RBX: ffff904ac95b86d8 RCX: ffff904b6f938838 [ 5505.365190] RDX: 0000000000000000 RSI: ffff904ac954b908 RDI: ffff904ac954b920 [ 5505.373628] RBP: ffff904b4ac13060 R08: 0000000000000001 R09: 0000000000000000 [ 5505.382155] R10: 0000000000000000 R11: 0000000000000040 R12: 0000000000000000 [ 5505.390527] R13: ffffb19184eb7bfc R14: ffff904b6bef5800 R15: ffff90482c1203c0 [ 5505.399246] FS: 0000000000000000(0000) GS:ffff904c2fc80000(0000) knlGS:0000000000000000 [ 5505.408621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5505.415739] CR2: 00007f5d27006010 CR3: 0000000058c10006 CR4: 00000000001626e0 [ 5505.424547] Call Trace: [ 5505.428429] idr_alloc_u32+0x7b/0xc0 [ 5505.433803] mlx5_tc_ct_entry_add_rule+0xbf/0x950 [mlx5_core] [ 5505.441354] ? mlx5_fc_create+0x23c/0x370 [mlx5_core] [ 5505.448225] mlx5_tc_ct_block_flow_offload+0x874/0x10b0 [mlx5_core] [ 5505.456278] ? mlx5_tc_ct_block_flow_offload+0x63d/0x10b0 [mlx5_core] [ 5505.464532] nf_flow_offload_tuple.isra.21+0xc5/0x140 [nf_flow_table] [ 5505.472286] ? __kmalloc+0x217/0x2f0 [ 5505.477093] ? flow_rule_alloc+0x1c/0x30 [ 5505.482117] flow_offload_work_handler+0x1d0/0x290 [nf_flow_table] [ 5505.489674] ? process_one_work+0x17c/0x580 [ 5505.494922] process_one_work+0x202/0x580 [ 5505.500082] ? process_one_work+0x17c/0x580 [ 5505.505696] worker_thread+0x4c/0x3f0 [ 5505.510458] kthread+0x103/0x140 [ 5505.514989] ? process_one_work+0x580/0x580 [ 5505.520616] ? kthread_bind+0x10/0x10 [ 5505.525837] ret_from_fork+0x3a/0x50 [ 5505.570841] ---[ end trace 07995de9c56d6831 ]--- This happens from parallel deletes/adds to idr, as idr isn't protected. Fix that by using xarray as the tuple_ids allocator instead of idr. Fixes: 7da182a998d6 ("netfilter: flowtable: Use work entry per offload command") Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Oz Shlomo <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-20net/mlx5: Fix failing fw tracer allocation on s390Niklas Schnelle1-3/+3
On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc() allocation as done for the firmware tracer will always fail. Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself that copies the debug data into the trace array and there is no need for the allocation to be contiguous in physical memory. We can therefor use kvzalloc() instead of kzalloc() and get rid of the large contiguous allcoation. Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic") Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-04-20kvm: Disable objtool frame pointer checking for vmenter.SJosh Poimboeuf1-0/+4
Frame pointers are completely broken by vmenter.S because it clobbers RBP: arch/x86/kvm/svm/vmenter.o: warning: objtool: __svm_vcpu_run()+0xe4: BP used as a scratch register That's unavoidable, so just skip checking that file when frame pointers are configured in. On the other hand, ORC can handle that code just fine, so leave objtool enabled in the !FRAME_POINTER case. Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Message-Id: <01fae42917bacad18be8d2cbc771353da6603473.1587398610.git.jpoimboe@redhat.com> Tested-by: Randy Dunlap <[email protected]> # build-tested Fixes: 199cd1d7b534 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file") Signed-off-by: Paolo Bonzini <[email protected]>
2020-04-20audit: check the length of userspace generated audit recordsPaul Moore1-0/+3
Commit 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") fixed a number of missing message length checks, but forgot to check the length of userspace generated audit records. The good news is that you need CAP_AUDIT_WRITE to submit userspace audit records, which is generally only given to trusted processes, so the impact should be limited. Cc: [email protected] Fixes: 756125289285 ("audit: always check the netlink payload length in audit_receive_msg()") Reported-by: [email protected] Signed-off-by: Paul Moore <[email protected]>
2020-04-21tpm/tpm_tis: Free IRQ if probing failsJarkko Sakkinen1-1/+7
Call disable_interrupts() if we have to revert to polling in order not to unnecessarily reserve the IRQ for the life-cycle of the driver. Cc: [email protected] # 4.5.x Reported-by: Hans de Goede <[email protected]> Fixes: e3837e74a06d ("tpm_tis: Refactor the interrupt setup") Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-04-21tpm: fix wrong return value in tpm_pcr_extendTianjia Zhang1-1/+1
For the algorithm that does not match the bank, a positive value EINVAL is returned here. I think this is a typo error. It is necessary to return an error value. Cc: [email protected] # 5.4.x Fixes: 9f75c8224631 ("KEYS: trusted: correctly initialize digests and fix locking issue") Signed-off-by: Tianjia Zhang <[email protected]> Reviewed-by: Roberto Sassu <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-04-21tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()George Wilson1-63/+73
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The "partner partition suspended" transport event disables the associated CRQ such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.' This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and retries the ibmvtpm_send_crq() once. Cc: [email protected] # 3.7.x Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Reported-by: Linh Pham <[email protected]> Reviewed-by: Stefan Berger <[email protected]> Signed-off-by: George Wilson <[email protected]> Tested-by: Linh Pham <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2020-04-21tpm: Export tpm2_get_cc_attrs_tbl for ibmvtpm driver as moduleStefan Berger1-0/+1
This patch fixes the following problem when the ibmvtpm driver is built as a module: ERROR: modpost: "tpm2_get_cc_attrs_tbl" [drivers/char/tpm/tpm_ibmvtpm.ko] undefined! make[1]: *** [scripts/Makefile.modpost:94: __modpost] Error 1 make: *** [Makefile:1298: modules] Error 2 Fixes: 18b3670d79ae ("tpm: ibmvtpm: Add support for TPM2") Signed-off-by: Stefan Berger <[email protected]> Reported-by: Sachin Sant <[email protected]> Tested-by: Sachin Sant <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.