| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[What]
Current SRIOV still using adev->clock.default_XX which gets from
atomfirmware. But these fields are abandoned in atomfirmware long ago.
Which may cause function to return a 0 value.
[How]
We don't need to check whether SR-IOV. For SR-IOV one-vf-mode,
pm is enabled and VF is able to read dpm clock
from pmfw, so we can use dpm clock interface directly. For
multi-VF mode, VF pm is disabled, so driver can just react as pm
disabled. One-vf-mode is introduced from GFX9 so it shall not have
any backward compatibility issue.
Signed-off-by: Horace Chen <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
BACO dummy mode could be set under reset conditions and that affects
framebuffer access. Check If baco dummy mode is set, unset it if so.
Signed-off-by: Lijo Lazar <[email protected]>
Signed-off-by: Le Ma <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Asad Kamal <[email protected]>
Tested-by: Asad Kamal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
If VBlank_nom is too small, it will cause
VStartUP_Start smaller than VBackPorch + VSync width which is an
invalid case for VStartUP_Start and where to send AS-SDP.
[How]
Setup a minimum value to VBlank_nom
Reviewed-by: Reza Amini <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: ChunTao Tso <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
vstartup is calculated to be a large number. it works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[how]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Kazlauskas Nicholas <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Reza Amini <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
This Unit correction exposes a Replay corruption.
[how]
This reverts commit:
commit dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")
Roll back unit conversion until Replay can fix their corruption.
Fixes: dbd29029c7b5 ("drm/amd/display: Correct unit conversion for vstartup")
Reviewed-by: Reza Amini <[email protected]>
Acked-by: Wayne Lin <[email protected]>
Signed-off-by: Ovidiu Bunea <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable ras for mp0 v13_0_6 sriov
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Stanley.Yang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
if hmm_range_get_pages returns EBUSY error during
svm_range_validate_and_map, within the context of a page fault
interrupt. This should retry through svm_range_restore_pages
callback. Therefore we treat this as EAGAIN error instead, and defer
it to restore pages fallback.
Signed-off-by: Alex Sierra <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Powergating is handled in the host driver.
Reviewed-by: Zhigang Luo <[email protected]>
Signed-off-by: Samir Dhume <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add critical temperature message support func for smu v13.0.6
and expose critical temperature as part of hw mon attributes
for GC v9.4.3
v2:
Added comment for pmfw version requirement & move the check
to get_thermal_temperature_range function
Signed-off-by: Asad Kamal <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update PMFW interface headers for updated metrics table and
critical temperature message
Signed-off-by: Asad Kamal <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Several new fields are exposed in gc_info v2_1
Signed-off-by: Le Ma <[email protected]>
Reviewed-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Mall info v2 is introduced in ip discovery
Signed-off-by: Le Ma <[email protected]>
Reviewed-by: Shiwu Zhang <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
RAS EEPROM device is only supported on dGPU platform for smu v13_0_6.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
7957ec80ef97 ("drm/amdgpu: Add FRU sysfs nodes only if needed") moved
the documentation for some of the sysfs nodes to amdgpu_fru_eeprom.c.
Update the documentation accordingly.
Signed-off-by: Lijo Lazar <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull more superblock follow-on fixes from Christian Brauner:
"This contains two more small follow-up fixes for the super work this
cycle. I went through all filesystems once more and detected two minor
issues that still needed fixing:
- Some filesystems support mtd devices (e.g., mount -t jffs2 mtd2
/mnt). The mtd infrastructure uses the sb->s_mtd pointer to find an
existing superblock. When the mtd device is put and sb->s_mtd
cleared the superblock can still be found fs_supers and so this
risks a use-after-free.
Add a small patch that aligns mtd with what we did for regular
block devices and switch keying to rely on sb->s_dev.
(This was tested with mtd devices and jffs2 as xfstests doesn't
support mtd devices.)
- Switch nfs back to rely on kill_anon_super() so the superblock is
removed from the list of active supers before sb->s_fs_info is
freed"
* tag 'v6.6-vfs.super.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
NFS: switch back to using kill_anon_super
mtd: key superblock by device number
fs: export sget_dev()
|
|
- There is a DPM issue where if DC is not present,
FCLK will stay at low level.
We need to send a SMU message to configure the DPM
- Reuse smu_v13_0_notify_display_change() for this purpose
Reviewed-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Bokun Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix up missed semantic mis-merge between commits
161e393c0f63 ("mm: Make pte_mkwrite() take a VMA")
27af67f35631 ("powerpc/book3s64/mm: enable transparent pud hugepage")
where the newly introduced powerpc use of 'pte_mkwrite()' needs to use
the 'novma()' versions as per commit 2f0584f3f4bd ("mm: Rename arch
pte_mkwrite()'s to pte_mkwrite_novma()").
Fixes: df57721f9a63 ("Merge tag 'x86_shstk_for_6.6-rc1' of [...]")
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When XCR0[9] is set, PKRU can be read and written from userspace with
XSAVE and XRSTOR, even when CR4.PKE is clear.
Clear XCR0[9] when protection keys are disabled.
Reported-by: Tavis Ormandy <[email protected]>
Signed-off-by: Jim Mattson <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit 1756ddea6916 ("pstore: Remove worst-case compression size logic")
removed some clunky per-algorithm worst case size estimation routines on
the basis that we can always store pstore records uncompressed, and
these worst case estimations are about how much the size might
inadvertently *increase* due to encapsulation overhead when the input
cannot be compressed at all. So if compression results in a size
increase, we just store the original data instead.
However, it seems that the original code was misinterpreting these
calculations as an estimation of how much uncompressed data might fit
into a compressed buffer of a given size, and it was using the results
to consume the input data in larger chunks than the pstore record size,
relying on the compression to ensure that what ultimately gets stored
fits into the available space.
One result of this, as observed and reported by Linus, is that upgrading
to a newer kernel that includes the given commit may result in pstore
decompression errors reported in the kernel log. This is due to the fact
that the existing records may unexpectedly decompress to a size that is
larger than the pstore record size.
Another potential problem caused by this change is that we may
underutilize the fixed sized records on pstore backends such as ramoops.
And on pstore backends with variable sized records such as EFI, we will
end up creating many more entries than before to store the same amount
of compressed data.
So let's fix both issues, by bringing back the typical case estimation of
how much ASCII text captured from the dmesg log might fit into a pstore
record of a given size after compression. The original implementation
used the computation given below for zlib:
switch (size) {
/* buffer range for efivars */
case 1000 ... 2000:
cmpr = 56;
break;
case 2001 ... 3000:
cmpr = 54;
break;
case 3001 ... 3999:
cmpr = 52;
break;
/* buffer range for nvram, erst */
case 4000 ... 10000:
cmpr = 45;
break;
default:
cmpr = 60;
break;
}
return (size * 100) / cmpr;
We will use the previous worst-case of 60% for compression. For
decompression go extra large (3x) so we make sure there's enough space
for anything.
While at it, rate limit the error message so we don't flood the log
unnecessarily on systems that have accumulated a lot of pstore history.
Cc: Linus Torvalds <[email protected]>
Cc: Eric Biggers <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Herbert Xu <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The mx3fb driver does not support devicetree and i.MX has been converted
to a DT-only platform since kernel 5.10.
As there is no user for this driver anymore, just remove it.
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Convert list_for_each() to list_for_each_entry() so that the pos
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
When using the "install" or targets depending on install, e.g. "gen_tar",
the BPF machine flavors weren't included.
A command like:
| make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \
| HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \
| -C tools/testing/selftests gen_tar
would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc.
Include the BPF machine flavors for "install" make target.
Signed-off-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
syzbot reported a data race splat between two processes trying to
update the same BPF map value via syscall on different CPUs:
BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update
write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1:
bpf_long_memcpy include/linux/bpf.h:428 [inline]
bpf_obj_memcpy include/linux/bpf.h:441 [inline]
copy_map_value_long include/linux/bpf.h:464 [inline]
bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
__sys_bpf+0x28a/0x780
__do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0:
bpf_long_memcpy include/linux/bpf.h:428 [inline]
bpf_obj_memcpy include/linux/bpf.h:441 [inline]
copy_map_value_long include/linux/bpf.h:464 [inline]
bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380
bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175
generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749
bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648
__sys_bpf+0x28a/0x780
__do_sys_bpf kernel/bpf/syscall.c:5241 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5239 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xfffffff000002788
The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size
and forced to use long read/writes to try to atomically copy long counters.
It is best-effort only and no barriers are here since it _will_ race with
concurrent updates from BPF programs. The bpf_long_memcpy() is called from
bpf(2) syscall. Marco suggested that the best way to make this known to
KCSAN would be to use data_race() annotation.
Reported-by: [email protected]
Suggested-by: Marco Elver <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Marco Elver <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.1693342186.git.daniel@iogearbox.net
|
|
Pull ARM updates from Russell King:
- Refactor VFP code and convert to C code (Ard Biesheuvel)
- Fix hardware breakpoint single-stepping using bpf_overflow_handler
- Make SMP stop calls asynchronous allowing panic from irq context to
work
- Fix for kernel-doc warnings for locomo
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert part of ae1f8d793a19 ("ARM: 9304/1: add prototype for function called only from asm")
ARM: 9318/1: locomo: move kernel-doc to prevent warnings
ARM: 9317/1: kexec: Make smp stop calls asynchronous
ARM: 9316/1: hw_breakpoint: fix single-stepping when using bpf_overflow_handler
ARM: entry: Make asm coproc dispatch code NWFPE only
ARM: iwmmxt: Use undef hook to enable coprocessor for task
ARM: entry: Disregard Thumb undef exception in coproc dispatch
ARM: vfp: Use undef hook for handling VFP exceptions
ARM: kernel: Get rid of thread_info::used_cp[] array
ARM: vfp: Reimplement VFP exception entry in C code
ARM: vfp: Remove workaround for Feroceon CPUs
ARM: vfp: Record VFP bounces as perf emulation faults
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/lkml/[email protected]/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
|
|
Fix this warning:
arch/x86/kernel/i8259.c:235: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
CC arch/x86/kernel/irqinit.o
Signed-off-by: Vincenzo Palazzo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The Gather Data Sampling (GDS) vulnerability is common to all Skylake
processors. However, the "client" Skylakes* are now in this list:
https://www.intel.com/content/www/us/en/support/articles/000022396/processors.html
which means they are no longer included for new vulnerabilities here:
https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
or in other GDS documentation. Thus, they were not included in the
original GDS mitigation patches.
Mark SKYLAKE and SKYLAKE_L as vulnerable to GDS to match all the
other Skylake CPUs (which include Kaby Lake). Also group the CPUs
so that the ones that share the exact same vulnerabilities are next
to each other.
Last, move SRBDS to the end of each line. This makes it clear at a
glance that SKYLAKE_X is unique. Of the five Skylakes, it is the
only "server" CPU and has a different implementation from the
clients of the "special register" hardware, making it immune to SRBDS.
This makes the diff much harder to read, but the resulting table is
worth it.
I very much appreciate the report from Michael Zhivich about this
issue. Despite what level of support a hardware vendor is providing,
the kernel very much needs an accurate and up-to-date list of
vulnerable CPUs. More reports like this are very welcome.
* Client Skylakes are CPUID 406E3/506E3 which is family 6, models
0x4E and 0x5E, aka INTEL_FAM6_SKYLAKE and INTEL_FAM6_SKYLAKE_L.
Reported-by: Michael Zhivich <[email protected]>
Fixes: 8974eb588283 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Daniel Sneddon <[email protected]>
Cc: Linus Torvalds <[email protected]>
|
|
Explicitly include mmu.h in spte.h instead of relying on the "parent" to
include mmu.h. spte.h references a variety of macros and variables that
are defined/declared in mmu.h, and so including spte.h before (or instead
of) mmu.h will result in build errors, e.g.
arch/x86/kvm/mmu/spte.h: In function ‘is_mmio_spte’:
arch/x86/kvm/mmu/spte.h:242:23: error: ‘enable_mmio_caching’ undeclared
242 | likely(enable_mmio_caching);
| ^~~~~~~~~~~~~~~~~~~
arch/x86/kvm/mmu/spte.h: In function ‘is_large_pte’:
arch/x86/kvm/mmu/spte.h:302:22: error: ‘PT_PAGE_SIZE_MASK’ undeclared
302 | return pte & PT_PAGE_SIZE_MASK;
| ^~~~~~~~~~~~~~~~~
arch/x86/kvm/mmu/spte.h: In function ‘is_dirty_spte’:
arch/x86/kvm/mmu/spte.h:332:56: error: ‘PT_WRITABLE_MASK’ undeclared
332 | return dirty_mask ? spte & dirty_mask : spte & PT_WRITABLE_MASK;
| ^~~~~~~~~~~~~~~~
Fixes: 5a9624affe7c ("KVM: mmu: extract spte.h and spte.c")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When attempting to allocate a shadow root for a !visible guest root gfn,
e.g. that resides in MMIO space, load a dummy root that is backed by the
zero page instead of immediately synthesizing a triple fault shutdown
(using the zero page ensures any attempt to translate memory will generate
a !PRESENT fault and thus VM-Exit).
Unless the vCPU is racing with memslot activity, KVM will inject a page
fault due to not finding a visible slot in FNAME(walk_addr_generic), i.e.
the end result is mostly same, but critically KVM will inject a fault only
*after* KVM runs the vCPU with the bogus root.
Waiting to inject a fault until after running the vCPU fixes a bug where
KVM would bail from nested VM-Enter if L1 tried to run L2 with TDP enabled
and a !visible root. Even though a bad root will *probably* lead to
shutdown, (a) it's not guaranteed and (b) the CPU won't read the
underlying memory until after VM-Enter succeeds. E.g. if L1 runs L2 with
a VMX preemption timer value of '0', then architecturally the preemption
timer VM-Exit is guaranteed to occur before the CPU executes any
instruction, i.e. before the CPU needs to translate a GPA to a HPA (so
long as there are no injected events with higher priority than the
preemption timer).
If KVM manages to get to FNAME(fetch) with a dummy root, e.g. because
userspace created a memslot between installing the dummy root and handling
the page fault, simply unload the MMU to allocate a new root and retry the
instruction. Use KVM_REQ_MMU_FREE_OBSOLETE_ROOTS to drop the root, as
invoking kvm_mmu_free_roots() while holding mmu_lock would deadlock, and
conceptually the dummy root has indeeed become obsolete. The only
difference versus existing usage of KVM_REQ_MMU_FREE_OBSOLETE_ROOTS is
that the root has become obsolete due to memslot *creation*, not memslot
deletion or movement.
Reported-by: Reima Ishii <[email protected]>
Cc: Yu Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Explicitly inject a page fault if guest attempts to use a !visible gfn
as a page table. kvm_vcpu_gfn_to_hva_prot() will naturally handle the
case where there is no memslot, but doesn't catch the scenario where the
gfn points at a KVM-internal memslot.
Letting the guest backdoor its way into accessing KVM-internal memslots
isn't dangerous on its own, e.g. at worst the guest can crash itself, but
disallowing the behavior will simplify fixing how KVM handles !visible
guest root gfns (immediately synthesizing a triple fault when loading the
root is architecturally wrong).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Explicitly check that tdp_iter_start() is handed a valid shadow page
to harden KVM against bugs, e.g. if KVM calls into the TDP MMU with an
invalid or shadow MMU root (which would be a fatal KVM bug), the shadow
page pointer will be NULL.
Opportunistically stop the TDP MMU iteration instead of continuing on
with garbage if the incoming root is bogus. Attempting to walk a garbage
root is more likely to caused major problems than doing nothing.
Cc: Yu Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Harden kvm_mmu_new_pgd() against NULL pointer dereference bugs by sanity
checking that the target root has an associated shadow page prior to
dereferencing said shadow page. The code in question is guaranteed to
only see roots with shadow pages as fast_pgd_switch() explicitly frees the
current root if it doesn't have a shadow page, i.e. is a PAE root, and
that in turn prevents valid roots from being cached, but that's all very
subtle.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a dedicated helper for converting a root hpa to a shadow page in
anticipation of using a "dummy" root to handle the scenario where KVM
needs to load a valid shadow root (from hardware's perspective), but
the guest doesn't have a visible root to shadow. Similar to PAE roots,
the dummy root won't have an associated kvm_mmu_page and will need special
handling when finding a shadow page given a root.
Opportunistically retrieve the root shadow page in kvm_mmu_sync_roots()
*after* verifying the root is unsync (the dummy root can never be unsync).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Open code gpa_to_gfn() in kvmgt_page_track_write() and drop KVMGT's
dependency on kvm_host.h, i.e. include only kvm_page_track.h. KVMGT
assumes "gfn == gpa >> PAGE_SHIFT" all over the place, including a few
lines below in the same function with the same gpa, i.e. there's no
reason to use KVM's helper for this one case.
No functional change intended.
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Get/put references to KVM when a page-track notifier is (un)registered
instead of relying on the caller to do so. Forcing the caller to do the
bookkeeping is unnecessary and adds one more thing for users to get
wrong, e.g. see commit 9ed1fdee9ee3 ("drm/i915/gvt: Get reference to KVM
iff attachment to VM is successful").
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Refactor KVM's exported/external page-track, a.k.a. write-track, APIs
to take only the gfn and do the required memslot lookup in KVM proper.
Forcing users of the APIs to get the memslot unnecessarily bleeds
KVM internals into KVMGT and complicates usage of the APIs.
No functional change intended.
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Bug the VM if something attempts to write-track a gfn, but write-tracking
isn't enabled. The VM is doomed (and KVM has an egregious bug) if KVM or
KVMGT wants to shadow guest page tables but can't because write-tracking
isn't enabled.
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When adding/removing gfns to/from write-tracking, assert that mmu_lock
is held for write, and that either slots_lock or kvm->srcu is held.
mmu_lock must be held for write to protect gfn_write_track's refcount,
and SRCU or slots_lock must be held to protect the memslot itself.
Tested-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Rename the page-track APIs to capture that they're all about tracking
writes, now that the facade of supporting multiple modes is gone.
Opportunstically replace "slot" with "gfn" in anticipation of removing
the @slot param from the external APIs.
No functional change intended.
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Drop "support" for multiple page-track modes, as there is no evidence
that array-based and refcounted metadata is the optimal solution for
other modes, nor is there any evidence that other use cases, e.g. for
access-tracking, will be a good fit for the page-track machinery in
general.
E.g. one potential use case of access-tracking would be to prevent guest
access to poisoned memory (from the guest's perspective). In that case,
the number of poisoned pages is likely to be a very small percentage of
the guest memory, and there is no need to reference count the number of
access-tracking users, i.e. expanding gfn_track[] for a new mode would be
grossly inefficient. And for poisoned memory, host userspace would also
likely want to trap accesses, e.g. to inject #MC into the guest, and that
isn't currently supported by the page-track framework.
A better alternative for that poisoned page use case is likely a
variation of the proposed per-gfn attributes overlay (linked), which
would allow efficiently tracking the sparse set of poisoned pages, and by
default would exit to userspace on access.
Link: https://lore.kernel.org/all/[email protected]
Cc: Ben Gardon <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Disable the page-track notifier code at compile time if there are no
external users, i.e. if CONFIG_KVM_EXTERNAL_WRITE_TRACKING=n. KVM itself
now hooks emulated writes directly instead of relying on the page-track
mechanism.
Provide a stub for "struct kvm_page_track_notifier_node" so that including
headers directly from the command line, e.g. for testing include guards,
doesn't fail due to a struct having an incomplete type.
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Bury the declaration of the page-track helpers that are intended only for
internal KVM use in a "private" header. In addition to guarding against
unwanted usage of the internal-only helpers, dropping their definitions
avoids exposing other structures that should be KVM-internal, e.g. for
memslots. This is a baby step toward making kvm_host.h a KVM-internal
header in the very distant future.
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Remove ->track_remove_slot(), there are no longer any users and it's
unlikely a "flush" hook will ever be the correct API to provide to an
external page-track user.
Cc: Zhenyu Wang <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Switch from the poorly named and flawed ->track_flush_slot() to the newly
introduced ->track_remove_region(). From KVMGT's perspective, the two
hooks are functionally equivalent, the only difference being that
->track_remove_region() is called only when KVM is 100% certain the
memory region will be removed, i.e. is invoked slightly later in KVM's
memslot modification flow.
Cc: Zhenyu Wang <[email protected]>
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Yan Zhao <[email protected]>
[sean: handle name change, massage changelog, rebase]
Tested-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add a new page-track hook, track_remove_region(), that is called when a
memslot DELETE operation is about to be committed. The "remove" hook
will be used by KVMGT and will effectively replace the existing
track_flush_slot() altogether now that KVM itself doesn't rely on the
"flush" hook either.
The "flush" hook is flawed as it's invoked before the memslot operation
is guaranteed to succeed, i.e. KVM might ultimately keep the existing
memslot without notifying external page track users, a.k.a. KVMGT. In
practice, this can't currently happen on x86, but there are no guarantees
that won't change in the future, not to mention that "flush" does a very
poor job of describing what is happening.
Pass in the gfn+nr_pages instead of the slot itself so external users,
i.e. KVMGT, don't need to exposed to KVM internals (memslots). This will
help set the stage for additional cleanups to the page-track APIs.
Opportunistically align the existing srcu_read_lock_held() usage so that
the new case doesn't stand out like a sore thumb (and not aligning the
new code makes bots unhappy).
Cc: Zhenyu Wang <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Signed-off-by: Yan Zhao <[email protected]>
Co-developed-by: Sean Christopherson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When handling a slot "flush", don't call back into KVM to drop write
protection for gfns in the slot. Now that KVM rejects attempts to move
memory slots while KVMGT is attached, the only time a slot is "flushed"
is when it's being removed, i.e. the memslot and all its write-tracking
metadata is about to be deleted.
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Disallow moving memslots if the VM has external page-track users, i.e. if
KVMGT is being used to expose a virtual GPU to the guest, as KVMGT doesn't
correctly handle moving memory regions.
Note, this is potential ABI breakage! E.g. userspace could move regions
that aren't shadowed by KVMGT without harming the guest. However, the
only known user of KVMGT is QEMU, and QEMU doesn't move generic memory
regions. KVM's own support for moving memory regions was also broken for
multiple years (albeit for an edge case, but arguably moving RAM is
itself an edge case), e.g. see commit edd4fa37baa6 ("KVM: x86: Allocate
new rmap and large page tracking when moving memslot").
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Drop @vcpu from KVM's ->track_write() hook provided for external users of
the page-track APIs now that KVM itself doesn't use the page-track
mechanism.
Reviewed-by: Yan Zhao <[email protected]>
Tested-by: Yongwei Ma <[email protected]>
Reviewed-by: Zhi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|