Age | Commit message (Collapse) | Author | Files | Lines |
|
The USB3 glue layer has 2 areas in the register set, see RM Rev.1
section 11.2.5.2.1 GLUE_usb3 memory map:
* USB3 control/status
* PHY control/status
Provide the memory area to the usb3 nodes for accessing the features
in the USB3 control area.
Reviewed-by: Li Jun <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The i.MX8MP glue layer has support for the following flags:
* over-current polarity
* PWR pad polarity
* controlling PPC flag in HCCPARAMS register
* permanent port attach for usb2 & usb3 port
Allow setting these flags by supporting specific flags in the glue node.
In order to get this to work an additional IORESOURCE_MEM and clock is
necessary. For backward compatibility this is purely optional.
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This adds bindings for features in the USB glue block. They allow
setting polarity of PWR and OC as well as disabling port power control.
Also permanently attached can be annotated as well.
Additional IO address and clock are needed.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Until now the iomem used is not USB glue as the name suggests, but
HSIO BLK_CTL. Rename the struct member accordingly. This is a preparing
patch for when USB glue is actually used.
Reviewed-by: Li Jun <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit a0c68e493007a8c72b6b00f6ac95590a86edc937.
Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.The changes need to be reverted as DT changes
for QCOM should go through the QCOM tree and not the USB tree.
Signed-off-by: Souradeep Chowdhury <[email protected]>
Link: https://lore.kernel.org/r/8c863e7e76003511dff36383b518ab66d2dd6552.1645793187.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit c18553956f34819e224a79c9890eba2ba0604e15.
Revert the change to set dr_mode for usb2 in case of
Embedded USB Debugger(EUD). This change needs to be
reverted as the DT changes for QCOM should go through
the QCOM tree and not the USB tree.
Signed-off-by: Souradeep Chowdhury <[email protected]>
Link: https://lore.kernel.org/r/87008876afb33d8e1b7fd78d2fd5b6d9ec343d7d.1645793187.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Constify the drvdata structs. This also matches the definition of
member drvdata in dwc3_meson_g12a.
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If we try to use raw_ioctl_ep_enable() for ep5in on a hardware that
only support from ep1-ep4 for both in and out direction, it will return
-EBUSY originally.
I think it will be more intuitive if we return -EINVAL, because -EBUSY
sounds like ep5in is not available now, but might be available in the
future.
Reviewed-by: Andrey Konovalov <[email protected]>
Signed-off-by: Wei Ming Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The usb-device.yaml reference is absolute so it should use /schemas part
in path.
Fixes: 23bf6fc7046c ("dt-bindings: usb: convert usb-device.txt to YAML schema")
Cc: <[email protected]>
Reported-by: Rob Herring <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use kzalloc instead of kmalloc + memset.
The semantic patch that makes this change is:
(https://coccinelle.gitlabpages.inria.fr/website/)
//<smpl>
@@
expression res, size, flag;
@@
- res = kmalloc(size, flag);
+ res = kzalloc(size, flag);
...
- memset(res, 0, size);
//</smpl>
Signed-off-by: Julia Lawall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix event parser error for hybrid systems
- Fix NULL check against wrong variable in 'perf bench' and in the
parsing code
- Update arm64 KVM headers from the kernel sources
- Sync cpufeatures header with the kernel sources
* tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse: Fix event parser error for hybrid systems
perf bench: Fix NULL check against wrong variable
perf parse-events: Fix NULL check against wrong variable
tools headers cpufeatures: Sync with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
|
|
Pull drm kconfig fix from Dave Airlie:
"Thorsten pointed out this had fallen down the cracks and was in -next
only, I've picked it out, fixed up it's Fixes: line.
- fix regression in Kconfig"
* tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm:
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
|
|
This bug happened on hybrid systems when both cpu_core and cpu_atom
have the same event name such as "UOPS_RETIRED.MS" while their event
terms are different, then during perf stat, the event for cpu_atom
will parse fail and then no output for cpu_atom.
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
It is because event terms in the "head" of parse_events_multi_pmu_add
will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS
for cpu_core, then when parsing the same event for cpu_atom, it still
uses the event terms for cpu_core, but event terms for cpu_atom are
different with cpu_core, the event parses for cpu_atom will fail. This
patch fixes it, the event terms should be parsed from the original
event.
This patch can work for the hybrid systems that have the same event
in more than 2 PMUs. It also can work in non-hybrid systems.
Before:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
Control descriptor is not initialized
UOPS_RETIRED.MS: 2737845 16068518485 16068518485
Performance counter stats for 'system wide':
2,737,845 cpu_core/UOPS_RETIRED.MS/
1.002553850 seconds time elapsed
After:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
Control descriptor is not initialized
UOPS_RETIRED.MS: 1977555 16076950711 16076950711
UOPS_RETIRED.MS: 568684 8038694234 8038694234
Performance counter stats for 'system wide':
1,977,555 cpu_core/UOPS_RETIRED.MS/
568,684 cpu_atom/UOPS_RETIRED.MS/
1.004758259 seconds time elapsed
Fixes: fb0811535e92c6c1 ("perf parse-events: Allow config on kernel PMU events")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Zhengjun Xing <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We did a NULL check after "epollfdp = calloc(...)", but we checked
"epollfd" instead of "epollfdp".
Signed-off-by: Weiguo Li <[email protected]>
Acked-by: Davidlohr Bueso <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
We did a null check after "tmp->symbol = strdup(...)", but we checked
"list->symbol" other than "tmp->symbol".
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Weiguo Li <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
d45476d983240937 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE")
Its just a comment fixup.
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
a5905d6af492ee6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: James Morse <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.
arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
`panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
`drm_panel_dp_aux_backlight'
make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1
The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]
v2:
* fix and expand commit description (Arnd)
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: 9d6366e743f3 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Linux Kernel Functional Testing <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/[email protected]/ # [2]
Cc: Thomas Zimmermann <[email protected]>
Cc: Lyude Paul <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Dave Airlie <[email protected]>
|
|
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- prevent users from enabling the alternatives framework (and thus
errata handling) on XIP kernels, where runtime code patching does not
function correctly.
- properly detect offset overflow for AUIPC-based relocations in
modules. This may manifest as modules calling arbitrary invalid
addresses, depending on the address allocated when a module is
loaded.
* tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix auipc+jalr relocation range checks
riscv: alternative only works on !XIP_KERNEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix STACKTRACE=n build, in particular for skiroot_defconfig"
* tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix STACKTRACE=n build
|
|
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Restore (mostly) the busy polling for MMC_SEND_OP_COND
MMC host:
- meson-gx: Fix DMA usage of meson_mmc_post_req()"
* tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND
mmc: meson: Fix usage of meson_mmc_post_req()
|
|
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: [email protected]
Fixes: 1728ab54b4be ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Merge misc fixes from David Howells:
"A set of patches for watch_queue filter issues noted by Jann. I've
added in a cleanup patch from Christophe Jaillet to convert to using
formal bitmap specifiers for the note allocation bitmap.
Also two filesystem fixes (afs and cachefiles)"
* emailed patches from David Howells <[email protected]>:
cachefiles: Fix volume coherency attribute
afs: Fix potential thrashing in afs writeback
watch_queue: Make comment about setting ->defunct more accurate
watch_queue: Fix lack of barrier/sync/lock between post and read
watch_queue: Free the alloc bitmap when the watch_queue is torn down
watch_queue: Fix the alloc bitmap size to reflect notes allocated
watch_queue: Use the bitmap API when applicable
watch_queue: Fix to always request a pow-of-2 pipe ring size
watch_queue: Fix to release page in ->release()
watch_queue, pipe: Free watchqueue state after clearing pipe ring
watch_queue: Fix filter limit check
|
|
A network filesystem may set coherency data on a volume cookie, and if
given, cachefiles will store this in an xattr on the directory in the
cache corresponding to the volume.
The function that sets the xattr just stores the contents of the volume
coherency buffer directly into the xattr, with nothing added; the
checking function, on the other hand, has a cut'n'paste error whereby it
tries to interpret the xattr contents as would be the xattr on an
ordinary file (using the cachefiles_xattr struct). This results in a
failure to match the coherency data because the buffer ends up being
shifted by 18 bytes.
Fix this by defining a structure specifically for the volume xattr and
making both the setting and checking functions use it.
Since the volume coherency doesn't work if used, take the opportunity to
insert a reserved field for future use, set it to 0 and check that it is
0. Log mismatch through the appropriate tracepoint.
Note that this only affects cifs; 9p, afs, ceph and nfs don't use the
volume coherency data at the moment.
Fixes: 32e150037dce ("fscache, cachefiles: Store the volume coherency data")
Reported-by: Rohith Surabattula <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
cc: Steve French <[email protected]>
cc: [email protected]
cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In afs_writepages_region(), if the dirty page we find is undergoing
writeback or write to cache, but the sync_mode is WB_SYNC_NONE, we go
round the loop trying the same page again and again with no pausing or
waiting unless and until another thread manages to clear the writeback
and fscache flags.
Fix this with three measures:
(1) Advance start to after the page we found.
(2) Break out of the loop and return if rescheduling is requested.
(3) Arbitrarily give up after a maximum of 5 skips.
Fixes: 31143d5d515e ("AFS: implement basic file write support")
Reported-by: Marc Dionne <[email protected]>
Signed-off-by: David Howells <[email protected]>
Tested-by: Marc Dionne <[email protected]>
Acked-by: Marc Dionne <[email protected]>
Link: https://lore.kernel.org/r/164692725757.2097000.2060513769492301854.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Since kprobe_int3_handler() is called in do_int3(), probing do_int3()
can cause a breakpoint recursion and crash the kernel. Therefore,
do_int3() should be marked as NOKPROBE_SYMBOL.
Fixes: 21e28290b317 ("x86/traps: Split int3 handler up")
Signed-off-by: Li Huafei <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Free the watch_queue note allocation bitmap when the watch_queue is
destroyed.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, watch_queue_set_size() sets the number of notes available in
wqueue->nr_notes according to the number of notes allocated, but sets
the size of the bitmap to the unrounded number of notes originally asked
for.
Fix this by setting the bitmap size to the number of notes we're
actually going to make available (ie. the number allocated).
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use bitmap_alloc() to simplify code, improve the semantic and reduce
some open-coded arithmetic in allocator arguments.
Also change a memset(0xff) into an equivalent bitmap_fill() to keep
consistency.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The pipe ring size must always be a power of 2 as the head and tail
pointers are masked off by AND'ing with the size of the ring - 1.
watch_queue_set_size(), however, lets you specify any number of notes
between 1 and 511. This number is passed through to pipe_resize_ring()
without checking/forcing its alignment.
Fix this by rounding the number of slots required up to the nearest
power of two. The request is meant to guarantee that at least that many
notifications can be generated before the queue is full, so rounding
down isn't an option, but, alternatively, it may be better to give an
error if we aren't allowed to allocate that much ring space.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When a pipe ring descriptor points to a notification message, the
refcount on the backing page is incremented by the generic get function,
but the release function, which marks the bitmap, doesn't drop the page
ref.
Fix this by calling generic_pipe_buf_release() at the end of
watch_queue_pipe_buf_release().
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In free_pipe_info(), free the watchqueue state after clearing the pipe
ring as each pipe ring descriptor has a release function, and in the
case of a notification message, this is watch_queue_pipe_buf_release()
which tries to mark the allocation bitmap that was previously released.
Fix this by moving the put of the pipe's ref on the watch queue to after
the ring has been cleared. We still need to call watch_queue_clear()
before doing that to make sure that the pipe is disconnected from any
notification sources first.
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In watch_queue_set_filter(), there are a couple of places where we check
that the filter type value does not exceed what the type_filter bitmap
can hold. One place calculates the number of bits by:
if (tf[i].type >= sizeof(wfilter->type_filter) * 8)
which is fine, but the second does:
if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG)
which is not. This can lead to a couple of out-of-bounds writes due to
a too-large type:
(1) __set_bit() on wfilter->type_filter
(2) Writing more elements in wfilter->filters[] than we allocated.
Fix this by just using the proper WATCH_TYPE__NR instead, which is the
number of types we actually know about.
The bug may cause an oops looking something like:
BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740
Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x150
...
kasan_report.cold+0x7f/0x11b
...
watch_queue_set_filter+0x659/0x740
...
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 611:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x81/0xa0
watch_queue_set_filter+0x23a/0x740
__x64_sys_ioctl+0x127/0x190
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88800d2c66a0
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 28 bytes inside of
32-byte region [ffff88800d2c66a0, ffff88800d2c66c0)
Fixes: c73be61cede5 ("pipe: Add general notification queue support")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.18 merge window
This includes following Thunderbolt/USB4 changes for the v5.18 merge
window:
* Improvements for Intel Alpine and Titan Ridge support
* Replace acpi_bus_get_device() with acpi_fetch_acpi_dev()
* Improvements around DROM handling on AMD hardware
* A couple of cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Rename EEPROM handling bits to match USB4 spec
thunderbolt: Clarify register definitions for `tb_cap_plug_events`
thunderbolt: Do not make DROM read success compulsory
thunderbolt: Do not resume routers if UID is not set
thunderbolt: Retry DROM reads for more failure scenarios
thunderbolt: Replace acpi_bus_get_device()
thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices
thunderbolt: Add missing device ID to tb_switch_is_alpine_ridge()
thunderbolt: Disable LTTPR on Intel Titan Ridge
thunderbolt: Remove useless DMA-32 fallback configuration
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for 5.18-rc1
Here are the USB-serial updates for 5.18-rc1, including:
- a new "simple driver" for some Nokia phones
- a fix for pl2303 GS type detection
- another pl2303 device id
Included is also a clean up.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: usb_wwan: remove redundant assignment to variable i
USB: serial: pl2303: fix GS type detection
USB: serial: pl2303: add IBM device IDs
USB: serial: simple: add Nokia phone driver
|
|
Pull drm fixes from Dave Airlie:
"As expected at this stage its pretty quiet, one sun4i mixer fix and
one i915 display flicker fix:
i915:
- fix psr screen flicker
sun4i:
- mixer format fix"
* tag 'drm-fixes-2022-03-11' of git://anongit.freedesktop.org/drm/drm:
drm/sun4i: mixer: Fix P010 and P210 format numbers
drm/i915/psr: Set "SF Partial Frame Enable" also on full update
|
|
RISC-V can do PC-relative jumps with a 32bit range using the following
two instructions:
auipc t0, imm20 ; t0 = PC + imm20 * 2^12
jalr ra, t0, imm12 ; ra = PC + 4, PC = t0 + imm12
Crucially both the 20bit immediate imm20 and the 12bit immediate imm12
are treated as two's-complement signed values. For this reason the
immediates are usually calculated like this:
imm20 = (offset + 0x800) >> 12
imm12 = offset & 0xfff
..where offset is the signed offset from the auipc instruction. When
the 11th bit of offset is 0 the addition of 0x800 doesn't change the top
20 bits and imm12 considered positive. When the 11th bit is 1 the carry
of the addition by 0x800 means imm20 is one higher, but since imm12 is
then considered negative the two's complement representation means it
all cancels out nicely.
However, this addition by 0x800 (2^11) means an offset greater than or
equal to 2^31 - 2^11 would overflow so imm20 is considered negative and
result in a backwards jump. Similarly the lower range of offset is also
moved down by 2^11 and hence the true 32bit range is
[-2^31 - 2^11, 2^31 - 2^11)
Signed-off-by: Emil Renner Berthing <[email protected]>
Fixes: e2c0cdfba7f6 ("RISC-V: User-facing API")
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix PSR2 when selective fetch is enabled and cursor at (-1, -1) (Jouni Högander)
Signed-off-by: Dave Airlie <[email protected]>
From: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/YinTFSFg++HvuFpZ@tursulin-mobl2
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/sun4i: Fix P010 and P210 format numbers
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/YipS65Iuu7RMMlAa@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Minor tracing fixes:
- Fix unregistering the same event twice. A user could disable the
same event that osnoise will disable on unregistering.
- Inform RCU of a quiescent state in the osnoise testing thread.
- Fix some kerneldoc comments"
* tag 'trace-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix some W=1 warnings in kernel doc comments
tracing/osnoise: Force quiescent states while tracing
tracing/osnoise: Do not unregister events twice
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
|
|
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 4a48ef70b93b8 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: Toke Høiland-Jørgensen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating
auxiliary device") changes a process of re-creation of aux device
so ice_plug_aux_dev() is called from ice_service_task() context.
This unfortunately opens a race window that can result in dead-lock
when interface has left LAG and immediately enters LAG again.
Reproducer:
```
#!/bin/sh
ip link add lag0 type bond mode 1 miimon 100
ip link set lag0
for n in {1..10}; do
echo Cycle: $n
ip link set ens7f0 master lag0
sleep 1
ip link set ens7f0 nomaster
done
```
This results in:
[20976.208697] Workqueue: ice ice_service_task [ice]
[20976.213422] Call Trace:
[20976.215871] __schedule+0x2d1/0x830
[20976.219364] schedule+0x35/0xa0
[20976.222510] schedule_preempt_disabled+0xa/0x10
[20976.227043] __mutex_lock.isra.7+0x310/0x420
[20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core]
[20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core]
[20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core]
[20976.261079] ib_register_device+0x40d/0x580 [ib_core]
[20976.266139] irdma_ib_register_device+0x129/0x250 [irdma]
[20976.281409] irdma_probe+0x2c1/0x360 [irdma]
[20976.285691] auxiliary_bus_probe+0x45/0x70
[20976.289790] really_probe+0x1f2/0x480
[20976.298509] driver_probe_device+0x49/0xc0
[20976.302609] bus_for_each_drv+0x79/0xc0
[20976.306448] __device_attach+0xdc/0x160
[20976.310286] bus_probe_device+0x9d/0xb0
[20976.314128] device_add+0x43c/0x890
[20976.321287] __auxiliary_device_add+0x43/0x60
[20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice]
[20976.330109] ice_service_task+0xd0c/0xed0 [ice]
[20976.342591] process_one_work+0x1a7/0x360
[20976.350536] worker_thread+0x30/0x390
[20976.358128] kthread+0x10a/0x120
[20976.365547] ret_from_fork+0x1f/0x40
...
[20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084
[20976.446469] Call Trace:
[20976.448921] __schedule+0x2d1/0x830
[20976.452414] schedule+0x35/0xa0
[20976.455559] schedule_preempt_disabled+0xa/0x10
[20976.460090] __mutex_lock.isra.7+0x310/0x420
[20976.464364] device_del+0x36/0x3c0
[20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice]
[20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice]
[20976.477288] notifier_call_chain+0x47/0x70
[20976.481386] __netdev_upper_dev_link+0x18b/0x280
[20976.489845] bond_enslave+0xe05/0x1790 [bonding]
[20976.494475] do_setlink+0x336/0xf50
[20976.502517] __rtnl_newlink+0x529/0x8b0
[20976.543441] rtnl_newlink+0x43/0x60
[20976.546934] rtnetlink_rcv_msg+0x2b1/0x360
[20976.559238] netlink_rcv_skb+0x4c/0x120
[20976.563079] netlink_unicast+0x196/0x230
[20976.567005] netlink_sendmsg+0x204/0x3d0
[20976.570930] sock_sendmsg+0x4c/0x50
[20976.574423] ____sys_sendmsg+0x1eb/0x250
[20976.586807] ___sys_sendmsg+0x7c/0xc0
[20976.606353] __sys_sendmsg+0x57/0xa0
[20976.609930] do_syscall_64+0x5b/0x1a0
[20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca
1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev()
is called from ice_service_task() context, aux device is created
and associated device->lock is taken.
2. Command 'ip link ... set master...' calls ice's notifier under
RTNL lock and that notifier calls ice_unplug_aux_dev(). That
function tries to take aux device->lock but this is already taken
by ice_plug_aux_dev() in step 1
3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already
taken in step 2
4. Dead-lock
The patch fixes this issue by following changes:
- Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev()
call in ice_service_task()
- The bit is checked in ice_clear_rdma_cap() and only if it is not set
then ice_unplug_aux_dev() is called. If it is set (in other words
plugging of aux device was requested and ice_plug_aux_dev() is
potentially running) then the function only clears the bit
- Once ice_plug_aux_dev() call (in ice_service_task) is finished
the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked
whether it was already cleared by ice_clear_rdma_cap(). If so then
aux device is unplugged.
Signed-off-by: Ivan Vecera <[email protected]>
Co-developed-by: Petr Oros <[email protected]>
Signed-off-by: Petr Oros <[email protected]>
Reviewed-by: Dave Ertman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|