aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-26drm/i915: Only fence tiled region of object.Bob Paauwe1-0/+7
When creating a fence for a tiled object, only fence the area that makes up the actual tiles. The object may be larger than the tiled area and if we allow those extra addresses to be fenced, they'll get converted to addresses beyond where the object is mapped. This opens up the possiblity of writes beyond the end of object. To prevent this, we adjust the size of the fence to only encompass the area that makes up the actual tiles. The extra space is considered un-tiled and now behaves as if it was a linear object. Testcase: igt/gem_tiled_fence_overflow Reported-by: Dan Hettena <[email protected]> Signed-off-by: Bob Paauwe <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Jani Nikula <[email protected]>
2015-01-26drm/i915: fix inconsistent brightness after resumeJeremiah Mahler1-1/+1
commit 6dda730e55f412a6dfb181cae6784822ba463847 Author: Jani Nikula <[email protected]> Date: Tue Jun 24 18:27:40 2014 +0300 drm/i915: respect the VBT minimum backlight brightness introduced a bug which resulted in inconsistent brightness levels on different machines. If a suspended was entered with the screen off some machines would resume with the screen at minimum brightness and others at maximum brightness. The following commands can be used to produce this behavior. xset dpms force off sleep 1 sudo systemctl suspend (resume ...) The root cause of this problem is a comparison which checks to see if the backlight level is zero when the panel is enabled. If it is zero, it is set to the maximum level. Unfortunately, not all machines have a minimum level of zero. On those machines the level is left at the minimum instead of begin set to the maximum. Fix the bug by updating the comparison to check for the minimum backlight level instead of zero. Also, expand the comparison for the possible case when the level is less than the minimum. Fixes: 6dda730e55f4 ("respect the VBT minimum backlight brightness") Signed-off-by: Jeremiah Mahler <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2015-01-26drm/i915: Init PPGTT before context enableDavid Woodhouse1-13/+6
Commit 82460d972 ("drm/i915: Rework ppgtt init to no require an aliasing ppgtt") introduced a regression on Broadwell, triggering the following IOMMU fault at startup: vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem dmar: DRHD: handling fault status reg 2 dmar: DMAR:[DMA Write] Request device [00:02.0] fault addr 880000 DMAR:[fault reason 23] Unknown fbcon: inteldrmfb (fb0) is primary device Further commentary from Daniel: I sugggested this change to David after staring at the offending patch for a while. I have no idea and theory whatsoever why this would upset the gpu less than the other way round. But it seems to work. David promised to chase hw people a bit more to get a more meaningful answer. Wrt the comment that this deletes: I've done some digging and afaict loading context before ppgtt enable was once required before our recent restructuring of the context/ppgtt init code: Before that context sw setup (i.e. allocating the default context) and hw setup was smashed together. Also the setup of the default context was the bit that actually allocated the aliasing ppgtt structures. Which is the reason for the context before ppgtt depency. Or was, since with all the untangling there's no no real depency any more (functional, who knows what the hw is doing), so the comment is just stale. Signed-off-by: David Woodhouse <[email protected]> Cc: [email protected] Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2015-01-26pinctrl: at91: allow to have disabled gpio bankJean-Christophe PLAGNIOL-VILLARD1-53/+55
Today we expect that all the bank are enabled, and count the number of banks used by the pinctrl based on it instead of using the last bank id enabled. So switch to it, set the chained IRQ at runtime based on enabled banks and wait only the number of enabled gpio controllers at probe time. Cc: <[email protected]> # 3.18 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> Signed-off-by: Ludovic Desroches <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-01-26gpio: mcp23s08: handle default gpio baseSonic Zhang1-7/+10
Create default gpio base if neither device node nor platform data is defined. Cc: Stable <[email protected]> Signed-off-by: Sonic Zhang <[email protected]> Reviewed-by: Alexandre Courbot <[email protected]> Tested-by: Antonio Fiol <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-01-26gpio: omap: Fix bad device access with setup_irq()Tony Lindgren1-6/+33
Similar to omap_gpio_irq_type() let's make sure that the GPIO is usable as an interrupt if the platform init code did not call gpio_request(). Otherwise we can get invalid device access after setup_irq(): WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x214/0x340() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4CFG (Idle): Data Access in Supervisor mode during Functional access ... [<c05f21e4>] (__irq_svc) from [<c05f1974>] (_raw_spin_unlock_irqrestore+0x34/0x44) [<c05f1974>] (_raw_spin_unlock_irqrestore) from [<c00914a8>] (__setup_irq+0x244/0x530) [<c00914a8>] (__setup_irq) from [<c00917d4>] (setup_irq+0x40/0x8c) [<c00917d4>] (setup_irq) from [<c0039c8c>] (omap_system_dma_probe+0x1d4/0x2b4) [<c0039c8c>] (omap_system_dma_probe) from [<c03b2200>] (platform_drv_probe+0x44/0xa4) ... We can fix this the same way omap_gpio_irq_type() is handling it. Note that the long term solution is to change the gpio-omap driver to handle the banks as separate driver instances. This will allow us to rely on just runtime PM for tracking the bank specific state. Reported-by: Russell King <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Santosh Shilimkar <[email protected]> Tested-by: Felipe Balbi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2015-01-25Merge branch 's390'David S. Miller3-139/+248
Ursula Braun says: ==================== s390/qeth patches for net here are two s390/qeth patches built for net. One patch is quite large, but we would like to fix the locking warning seen in recent kernels as soon as possible. But if you want me to submit these patches for net-next, I will do. Or Gerlitz says: ==================== Signed-off-by: David S. Miller <[email protected]>
2015-01-25390/qeth: Fix locking warning during qeth device setupThomas Richter3-34/+132
Do not wait for channel command buffers in IPA commands. The potential wait could be done while holding a spin lock and causes in recent kernels such a bug if kernel lock debugging is enabled: kernel: BUG: sleeping function called from invalid context at drivers/s390/net/qeth_core_main.c: 794 kernel: in_atomic(): 1, irqs_disabled(): 0, pid: 2031, name: NetworkManager kernel: 2 locks held by NetworkManager/2031: kernel: #0: (rtnl_mutex){+.+.+.}, at: [<00000000006e0d7a>] rtnetlink_rcv+0x32/0x50 kernel: #1: (_xmit_ETHER){+.....}, at: [<00000000006cfe90>] dev_set_rx_mode+0x30/0x50 kernel: CPU: 0 PID: 2031 Comm: NetworkManager Not tainted 3.18.0-rc5-next-20141124 #1 kernel: 00000000275fb1f0 00000000275fb280 0000000000000002 0000000000000000 00000000275fb320 00000000275fb298 00000000275fb298 00000000007e326a 0000000000000000 000000000099ce2c 00000000009b4988 000000000000000b 00000000275fb2e0 00000000275fb280 0000000000000000 0000000000000000 0000000000000000 00000000001129c8 00000000275fb280 00000000275fb2e0 kernel: Call Trace: kernel: ([<00000000001128b0>] show_trace+0xf8/0x158) kernel: [<000000000011297a>] show_stack+0x6a/0xe8 kernel: [<00000000007e995a>] dump_stack+0x82/0xb0 kernel: [<000000000017d668>] ___might_sleep+0x170/0x228 kernel: [<000003ff80026f0e>] qeth_wait_for_buffer+0x36/0xd0 [qeth] kernel: [<000003ff80026fe2>] qeth_get_ipacmd_buffer+0x3a/0xc0 [qeth] kernel: [<000003ff80105078>] qeth_l3_send_setdelmc+0x58/0xf8 [qeth_l3] kernel: [<000003ff8010b1fe>] qeth_l3_set_ip_addr_list+0x2c6/0x848 [qeth_l3] kernel: [<000003ff8010bbb4>] qeth_l3_set_multicast_list+0x434/0xc48 [qeth_l3] kernel: [<00000000006cfe9a>] dev_set_rx_mode+0x3a/0x50 kernel: [<00000000006cff90>] __dev_open+0xe0/0x140 kernel: [<00000000006d02a0>] __dev_change_flags+0xa0/0x178 kernel: [<00000000006d03a8>] dev_change_flags+0x30/0x70 kernel: [<00000000006e14ee>] do_setlink+0x346/0x9a0 ... The device driver has plenty of command buffers available per channel for channel command communication. In the extremely rare case when there is no command buffer available, return a NULL pointer and issue a warning in the kernel log. The caller handles the case when a NULL pointer is encountered and returns an error. In the case the wait for command buffer is possible (because no lock is held as in the OSN case), still wait until a channel command buffer is available. Signed-off-by: Thomas Richter <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Reviewed-by: Eugene Crosser <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25qeth: clean up error handlingEugene Crosser2-106/+117
In the functions that are registering and unregistering MAC addresses in the qeth-handled hardware, remove callback functions that are unnesessary, as only the return code is analyzed. Translate hardware response codes to semi-standard 'errno'-like codes for readability. Add kernel-doc description to the internal API function qeth_send_control_data(). Signed-off-by: Eugene Crosser <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Reviewed-by: Thomas-Mich Richter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25ipv6: Fix __ip6_route_redirectMartin KaFai Lau1-1/+5
In my last commit (a3c00e4: ipv6: Remove BACKTRACK macro), the changes in __ip6_route_redirect is incorrect. The following case is missed: 1. The for loop tries to find a valid gateway rt. If it fails to find one, rt will be NULL. 2. When rt is NULL, it is set to the ip6_null_entry. 3. The newly added 'else if', from a3c00e4, will stop the backtrack from happening. Signed-off-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25Linux 3.19-rc6Linus Torvalds1-1/+1
2015-01-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds16-77/+106
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt
2015-01-25Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds5-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "From the irqchip departement you get: - regression fix for omap-intc - regression fix for atmel-aic-common - functional correctness fix for hip04 - type mismatch fix for gic-v3-its - proper error pointer check for mtd-sysirq Mostly one and two liners except for the omap regression fix which is slightly larger than desired" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type irqchip: omap-intc: Fix legacy DMA regression irqchip: gic-v3-its: Fix use of max with decimal constant irqchip: hip04: Initialize hip04_cpu_map to 0xffff irqchip: mtk-sysirq: Use IS_ERR() instead of NULL pointer check
2015-01-25Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds6-8/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes: - regression fix for exynos_mct clocksource - trivial build fix for kona clocksource - functional one liner fix for the sh_tmu clocksource - two validation fixes to prevent (root only) data corruption in the kernel via settimeofday and adjtimex. Tagged for stable" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time: adjtimex: Validate the ADJ_FREQUENCY values time: settimeofday: Validate the values of tv from user clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast clocksource: kona: fix __iomem annotation clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
2015-01-25Merge tag 'armsoc-for-linus' of ↵Linus Torvalds17-14/+117
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A week's worth of fixes for various ARM platforms. Diff wise, the largest fix is for OMAP to deal with how GIC now registers interrupts (irq_domain_add_legacy() -> irq_domain_add_linear() changes). Besides this, a few more renesas platforms needed the GIC instatiation done for legacy boards. There's also a fix that disables coherency of mvebu due to issues, and a few other smaller fixes" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add baud rate to Juno stdout-path ARM: dts: imx25: Fix PWM "per" clocks bus: mvebu-mbus: fix support of MBus window 13 Merge tag 'mvebu-fixes-3.19-3' of git://git.infradead.org/linux-mvebu into fixes ARM: mvebu: completely disable hardware I/O coherency ARM: OMAP: Work around hardcoded interrupts ARM: shmobile: r8a7779: Instantiate GIC from C board code in legacy builds ARM: shmobile: r8a7778: Instantiate GIC from C board code in legacy builds arm: boot: dts: dra7: enable dwc3 suspend PHY quirk
2015-01-25Merge branch 'for-linus' of ↵Linus Torvalds2-17/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "A couple of fixes - deadlock in CIFS and build breakage in cris serial driver (resurfaced f_dentry in there)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: VFS: Convert file->f_dentry->d_inode to file_inode() fix deadlock in cifs_ioctl_clone()
2015-01-25Merge tag 'dm-3.19-fixes-2' of ↵Linus Torvalds3-47/+152
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Two stable fixes for dm-cache and one 3.19 DM core fix: - fix potential for dm-cache metadata corruption via stale metadata buffers being used when switching an inactive cache table to active; this could occur due to each table having it's own bufio client rather than sharing the client between tables. - fix dm-cache target to properly account for discard IO while suspending otherwise IO quiescing could complete prematurely. - fix DM core's handling of multiple internal suspends by maintaining an 'internal_suspend_count' and only resuming the device when this count drops to zero" * tag 'dm-3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix handling of multiple internal suspends dm cache: fix problematic dual use of a single migration count variable dm cache: share cache-metadata object across inactive and active DM tables
2015-01-25Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds3-8/+25
Pull two block layer fixes from Jens Axboe: "Two small patches that should make it into 3.19: - a fixup from me for NVMe, making the cq_vector a signed variable. Otherwise our -1 comparison fails, and commit 2b25d981790b doesn't do what it was supposed to. - a fixup for the hotplug handling for blk-mq from Ming Lei, using the proper kobject referencing to ensure we release resources at the right time" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: fix hctx/ctx kobject use-after-free NVMe: cq_vector should be signed
2015-01-25net: dsa: set slave MII bus PHY maskVivien Didelot1-0/+1
When registering a mdio bus, Linux assumes than every port has a PHY and tries to scan it. If a switch port has no PHY registered, DSA will fail to register the slave MII bus. To fix this, set the slave MII bus PHY mask to the switch PHYs mask. As an example, if we use a Marvell MV88E6352 (which is a 7-port switch with no registered PHYs for port 5 and port 6), with the following declared names: static struct dsa_chip_data switch_cdata = { [...] .port_names[0] = "sw0", .port_names[1] = "sw1", .port_names[2] = "sw2", .port_names[3] = "sw3", .port_names[4] = "sw4", .port_names[5] = "cpu", }; DSA will fail to create the switch instance. With the PHY mask set for the slave MII bus, only the PHY for ports 0-4 will be scanned and the instance will be successfully created. Signed-off-by: Vivien Didelot <[email protected]> Tested-by: Florian Fainelli <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25ARM: sunxi: dt: Fix aliasesMaxime Ripard15-50/+40
Commit f77d55a3b56a ("serial: 8250_dw: get index of serial line from DT aliases") made the serial driver now use the serial aliases to get the tty number, pointing out that our aliases have been wrong all along. Remove them from the DTSI and add custom ones in the relevant boards. Signed-off-by: Maxime Ripard <[email protected]>
2015-01-25USB: Add OTG PET device to TPLMacpaul Lin2-0/+9
OTG device shall support this device for allowing compliance automated testing. The modification is derived from Pavankumar and Vijayavardhans' previous work. Signed-off-by: Macpaul Lin <[email protected]> Cc: Pavankumar Kondeti <[email protected]> Cc: Vijayavardhan Vennapusa <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controllerDmitry Nezhevenko1-0/+7
It looks like FUA support is broken on JMicron 152d:2566 bridge: [223159.885704] sd 7:0:0:0: [sdc] Write Protect is off [223159.885706] sd 7:0:0:0: [sdc] Mode Sense: 47 00 10 08 [223159.885942] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [223283.691677] sd 7:0:0:0: [sdc] [223283.691680] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [223283.691681] sd 7:0:0:0: [sdc] [223283.691682] Sense Key : Illegal Request [current] [223283.691684] sd 7:0:0:0: [sdc] [223283.691685] Add. Sense: Invalid field in cdb [223283.691686] sd 7:0:0:0: [sdc] CDB: [223283.691687] Write(10): 2a 08 15 d0 83 0d 00 00 01 00 [223283.691690] blk_update_request: critical target error, dev sdc, sector 2927892584 This patch adds blacklist flag so that sd will not use FUA Signed-off-by: Dmitry Nezhevenko <[email protected]> Cc: Phil Dibowitz <[email protected]> Cc: Alan Stern <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017Hans de Goede1-0/+7
Like some other uas devices these devices hang when a report-opcodes scsi command is send to them. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1124119 Cc: [email protected] # 3.16 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converterMark Knibbs1-1/+1
I recently posted a patch ("storage: Add quirk for another SCM-based USB-SCSI converter") to add a quirk for the converter with ID 04E6:000F, which is listed along with 04E6:000B in the Windows INF file for the Startech ICUSBSCSI2 as "eUSB SCSI Adapter (Bus Powered)". The already-present quirk for 04E6:000B has USB_SC_SCSI/USB_PR_BULK, not USB_SC_DEVICE/USB_PR_DEVICE. Change the 04E6:000F quirk to match that, since it will probably be required. Signed-off-by: Mark Knibbs <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25drivers/Kconfig: remove duplicate entry for socLars Poeschel1-2/+0
For some reason there was the same menu entry in menuconfig twice. This trivial patch leaves the one that is older as is and removes the other entry. Signed-off-by: Lars Poeschel <[email protected]> Signed-off-by: Pramod Gurav <[email protected]> Acked-by: Borislav Petkov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25MAINTAINERS: add git url entry for UIOMandeep Sandhu1-0/+1
Added git url for UIO section. Signed-off-by: Mandeep Sandhu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25MAINTAINERS: add Android driver entriesGreg KH1-0/+10
Put down me, Arve, and Riley as maintainers for the android drivers. Cc: Arve Hjønnevåg <[email protected]> Cc: Riley Andrews <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25staging: nvec: specify a platform-device base idMarc Dietrich1-6/+3
commit 6e3f62f079 (mfd: core: Fix platform-device id generation) modified the computation of the mfd cell id. Negative numbers forbit the specification of cell ids as we do. Fix this for now by specifying a base of 0 instead. In the long run, this may be changed to automatic cell ids (base -2). Fixes: 6e3f62f079 Reported-by: Misha Komarovskiy <[email protected]> Signed-off-by: Marc Dietrich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-01-25ipvlan: fix incorrect usage of IS_ERR() macro in IPv6 code path.Mahesh Bandewar1-2/+4
The ip6_route_output() always returns a valid dst pointer unlike in IPv4 case. So the validation has to be different from the IPv4 path. Correcting that error in this patch. This was picked up by a static checker with a following warning - drivers/net/ipvlan/ipvlan_core.c:380 ipvlan_process_v6_outbound() warn: 'dst' isn't an ERR_PTR Signed-off-by: Mahesh Bandewar <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25net: llc: use correct size for sysctl timeout entriesSasha Levin1-4/+4
The timeout entries are sizeof(int) rather than sizeof(long), which means that when they were getting read we'd also leak kernel memory to userspace along with the timeout values. Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25netxen: fix netxen_nic_poll() logicEric Dumazet1-1/+4
NAPI poll logic now enforces that a poller returns exactly the budget when it wants to be called again. If a driver limits TX completion, it has to return budget as well when the limit is hit, not the number of received packets. Reported-and-tested-by: Mike Galbraith <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Fixes: d75b1ade567f ("net: less interrupt masking in NAPI") Cc: Manish Chopra <[email protected]> Acked-by: Manish Chopra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-24enic: fix rx napi poll return valueGovindarajulu Varadarajan1-1/+1
With the commit d75b1ade567ffab ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. When we are in busy_poll we return 0 in napi_poll. We should return budget. Signed-off-by: Govindarajulu Varadarajan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-24Merge tag 'wireless-drivers-for-davem-2015-01-20' of ↵David S. Miller6-31/+69
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers ath9k: * fix an IRQ storm caused by commit 872b5d814f99 iwlwifi: * A fix for scan that fixes a firmware assertion * A fix that improves roaming behavior. Same fix has been tested for a while in iwldvm. This is a bit of a work around, but the real fix should be in mac80211 and will come later. * A fix for BARs that avoids a WARNING. * one fix for rfkill while scheduled scan is running. Linus's system hit this issue. WiFi would be unavailable after this has happpened because of bad state in cfg80211. Signed-off-by: David S. Miller <[email protected]>
2015-01-24ARM: dts: imx6sx: correct i.MX6sx sdb board enet phy addressNimrod Andy1-4/+4
The commit (3d125f9c91c5) cause i.MX6SX sdb enet cannot work. The cause is the commit add mdio node with un-correct phy address. The patch just correct i.MX6sx sdb board enet phy address. V2: * As Shawn's suggestion that unit-address should match 'reg' property, so update ethernet-phy unit-address. Acked-by: Stefan Agner <[email protected]> Signed-off-by: Fugang Duan <[email protected]> Acked-by: Shawn Guo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-24Merge tag 'scsi-fixes' of ↵Linus Torvalds5-6/+108
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi pULL SCSI fixes from James Bottomley: "This consists of four real fixes and three MAINTAINER updates. Three of the fixes are obvious (the DIX and atomic allocation are bug on and warn on fixes and the other is just trivial) and the ipr one is a bit more involved but is required because without it, the card double completes aborted commands and causes a kernel oops" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: MAINTAINERS: ibmvscsi driver maintainer change MAINTAINERS: ibmvfc driver maintainer change MAINTAINERS: Remove self as isci maintainer scsi_debug: test always evaluates to false, || should be used instead scsi: Avoid crashing if device uses DIX but adapter does not support it scsi_debug: use atomic allocation in resp_rsup_opcodes ipr: wait for aborted command responses
2015-01-24Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds3-11/+31
Pull watchdog fixes from Wim Van Sebroeck: "This will fix reboot issues with the imx2_wdt driver and it also drops some forgotten owner assignments from platform_drivers" * git://www.linux-watchdog.org/linux-watchdog: watchdog: drop owner assignment from platform_drivers watchdog: imx2_wdt: Disable power down counter on boot watchdog: imx2_wdt: Improve power management support.
2015-01-24Merge branch 'hwmon-for-linus' of ↵Linus Torvalds3-0/+160
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon update from Jean Delvare: "This contains a single thing: a new driver for the temperature sensor embedded in the Intel 5500/5520/X58 chipsets. Sorry for the late request, it's been so long since I last sent a pull request and I've been so busy with other tasks meanwhile that I simply forgot about these patches. But given that this is a new driver, it can't introduce any regression so I thought it could still be OK. This has been in linux-next for months now" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macro hwmon: (i5500_temp) Convert to module_pci_driver hwmon: (i5500_temp) Don't bind to disabled sensors hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groups hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets
2015-01-24Merge tag 'media/v3.19-4' of ↵Linus Torvalds16-40/+77
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - fix some race conditions caused by a regression on videobuf2 - fix a interrupt release bug on cx23885 - fix support for Mygica T230 and HVR4400 - fix compilation breakage when USB is not selected on tlg2300 - fix capabilities report on ompa3isp, soc-camera, rcar_vin and pvrusb2 * tag 'media/v3.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] omap3isp: Correctly set QUERYCAP capabilities [media] cx23885: fix free interrupt bug [media] pvrusb2: fix missing device_caps in querycap [media] vb2: fix vb2_thread_stop race conditions [media] rcar_vin: Update device_caps and capabilities in querycap [media] soc-camera: fix device capabilities in multiple camera host drivers [media] Fix Mygica T230 support [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry [media] tlg2300: Fix media dependencies
2015-01-24dm: fix handling of multiple internal suspendsMikulas Patocka1-2/+7
Commit ffcc393641 ("dm: enhance internal suspend and resume interface") attempted to handle multiple internal suspends on the same device, but it did that incorrectly. When these functions are called in this order on the same device the device is no longer suspended, but it should be: dm_internal_suspend_noflush dm_internal_suspend_noflush dm_internal_resume Fix this bug by maintaining an 'internal_suspend_count' and resuming the device when this count drops to zero. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2015-01-24hwmon: (i5500_temp) Convert to use ATTRIBUTE_GROUPS macroAxel Lin1-10/+3
Use ATTRIBUTE_GROUPS macro to simplify the code a bit. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2015-01-24hwmon: (i5500_temp) Convert to module_pci_driverAxel Lin1-12/+1
Use module_pci_driver to simplify the code a bit. Signed-off-by: Axel Lin <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2015-01-24hwmon: (i5500_temp) Don't bind to disabled sensorsJean Delvare1-0/+9
On many motherboards, for an unknown reason, the thermal sensor seems to be disabled and will return a constant temperature value of 36.5 degrees Celsius. Don't bind to the device in that case, so that we don't report this bogus value to userspace. Signed-off-by: Jean Delvare <[email protected]> Cc: Romain Dolbeau <[email protected]> Reviewed-by: Guenter Roeck <[email protected]>
2015-01-24hwmon: (i5500_temp) Convert to devm_hwmon_device_register_with_groupsJean Delvare1-58/+15
Use devm_hwmon_device_register_with_groups() to simplify the code a bit. Signed-off-by: Jean Delvare <[email protected]> Cc: Romain Dolbeau <[email protected]> Reviewed-by: Guenter Roeck <[email protected]>
2015-01-24hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsetsJean Delvare3-0/+212
The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare <[email protected]> Tested-by: Romain Dolbeau <[email protected]> Reviewed-by: Guenter Roeck <[email protected]>
2015-01-23amd-xgbe: Use proper Rx flow control registerLendacky, Thomas2-6/+7
Updated hardware documention shows the Rx flow control settings were moved from the Rx queue operation mode register to a new Rx queue flow control register. The old flow control settings are now reserved areas of the Rx queue operation mode register. Update the code to use the new register. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-24i2c: s3c2410: fix ABBA deadlock by keeping clock preparedPaul Osmialowski1-6/+17
This patch solves deadlock between clock prepare mutex and regmap mutex reported by Tomasz Figa in [1] by implementing solution from [2]: "always leave the clock of the i2c controller in a prepared state". [1] https://lkml.org/lkml/2014/7/2/171 [2] https://lkml.org/lkml/2014/7/2/207 On each i2c transfer handled by s3c24xx_i2c_xfer(), clk_prepare_enable() was called, which calls clk_prepare() then clk_enable(). clk_prepare() takes prepare_lock mutex before proceeding. Note that i2c transfer functions are invoked from many places in kernel, typically with some other additional lock held. It may happen that function on CPU1 (e.g. regmap_update_bits()) has taken a mutex (i.e. regmap lock mutex) then it attempts i2c communication in order to proceed (so it needs to obtain clock related prepare_lock mutex during transfer preparation stage due to clk_prepare() call). At the same time other task on CPU0 wants to operate on clock (e.g. to (un)prepare clock for some other reason) so it has taken prepare_lock mutex. CPU0: CPU1: clk_disable_unused() regulator_disable() clk_prepare_lock() map->lock(map->lock_arg) regmap_read() s3c24xx_i2c_xfer() map->lock(map->lock_arg) clk_prepare_lock() Implemented solution from [2] leaves i2c clock prepared. Preparation is done in s3c24xx_i2c_probe() function. Without this patch, it is immediately unprepared by clk_disable_unprepare() call. I've replaced this call with clk_disable() and I've added clk_unprepare() call in s3c24xx_i2c_remove(). The s3c24xx_i2c_xfer() function now uses clk_enable() instead of clk_prepare_enable() (and clk_disable() instead of clk_unprepare_disable()). Signed-off-by: Paul Osmialowski <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2015-01-24i2c: slave-eeprom: fix boundary check when using sysfsWolfram Sang1-2/+2
Due to a copy&paste error, the last byte of the shared memory was not accessible via sysfs. Reported-by: Debora Grosse <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Laurent Pinchart <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2015-01-24i2c: st: Rename clock reference to something that existsLee Jones1-1/+1
CLK_S_ICN_REG_0 hasn't existed for a while now. This was renamed over a few commits, then finally removed in commit 5aa02b9 (ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock). Signed-off-by: Lee Jones <[email protected]> Acked-by: Maxime Coquelin <[email protected]> Acked-by: Peter Griffin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2015-01-24Merge branch 'for-linus' of ↵Linus Torvalds6-6/+17
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "We have a few fixes in my for-linus branch. Qu Wenruo's batch fix a regression between some our merge window pull and the inode_cache feature. The rest are smaller bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: Don't call btrfs_start_transaction() on frozen fs to avoid deadlock. btrfs: Fix the bug that fs_info->pending_changes is never cleared. btrfs: fix state->private cast on 32 bit machines Btrfs: fix race deleting block group from space_info->ro_bgs list Btrfs: fix incorrect freeing in scrub_stripe btrfs: sync ioctl, handle errors after transaction start
2015-01-24Merge tag 'platform-drivers-x86-v3.19-2' of ↵Linus Torvalds2-1109/+6
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull platform driver fix from Darren Hart: "Revert keyboard backlight sysfs support and documentation. The support for the dell-laptop keyboard backlight was flawed and the fix: https://lkml.org/lkml/2015/1/14/539 was more invasive that I felt comfortable sending at RC5. This series reverts the support for the dell-laptop keyboard backlight as well as the documentation for the newly created sysfs attributes. We'll get this implemented correctly for 3.20" * tag 'platform-drivers-x86-v3.19-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: Revert "platform: x86: dell-laptop: Add support for keyboard backlight" Revert "Documentation: Add entry for dell-laptop sysfs interface"
Powered by cgit, Gruvboxed by Blaster4385.