aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-02arm64: dts: qcom: msm8916: add xo clocks to rpmcc and a53pllDmitry Baryshkov1-0/+4
Both a53pll and rpmcc make use of xo as a clock parent. Add it to the respective device nodes. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8996: add second DSI interfaceDmitry Baryshkov1-0/+73
Add device nodes for the DSI1, second DSI interface found on MSM8996/APQ8096 platforms. For example on db820c it is routed to the secondary HS expansion connector. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: add mdp_clk clock to the MDSS deviceDmitry Baryshkov1-2/+3
Add MDP_CLK ("core") clock to the mdss device to allow MDSS driver to access HW_REV/etc registers. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8250: Enable per-process page tables.Emma Anholt1-1/+1
This is an SMMU for the adreno gpu, and adding this compatible lets the driver use per-fd page tables, which are required for security between GPU clients. Signed-off-by: Emma Anholt <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> [bjorn: Move arm,smmu-500 last, per Dmitry's request] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8916-samsung-a2015: Add touchscreen pinctrlLin, Meng-Bo3-16/+8
A3, A5 and most of the Samsung phones with MSM8916 SoC use GPIO pin 13 for touchscreen interrupts. Add touchscreen pinctrl to a2015 common dtsi. Signed-off-by: Lin, Meng-Bo <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8996: drop phy-names from HDMI device nodeDmitry Baryshkov1-1/+0
The HDMI driver doesn't use the phy-names to identify the PHY. Different Qualcomm platforms have used different names for the PHY. So, we are deprecating phy-names propertty of the HDMI device and dropping them from existing DTs. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8994: add required ranges to OCMEMKrzysztof Kozlowski1-0/+1
The OCMEM bindings require ranges property. Fixes: 9d511d0a7926 ("arm64: dts: qcom: msm8994: Add OCMEM node") Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm845: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-1/+1
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm630: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-1/+1
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sc7280: add simple-mfd to IMEMKrzysztof Kozlowski1-1/+1
The IMEM node has children (PIL) which should be instantiated with simple-mfd. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sc7180: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-1/+1
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: qcs404: add dedicated IMEM and syscon compatiblesKrzysztof Kozlowski1-1/+1
Add proper compatibles to the IMEM device node: 1. syscon to allow accessing memory from other devices, 2. dedicated compatible as required for syscon and simple-mfd nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: use generic sram as name for imem and ocmem nodesKrzysztof Kozlowski6-6/+6
According to Devicetree specification, the device nodes should be generic, reflecting the function of the device. The typical name for memory regions is "sram". Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm845-db845c: add function and color to LED nodesKrzysztof Kozlowski1-0/+7
Add common LED properties - the function and color - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sc7280-herobrine: add function to LED nodeKrzysztof Kozlowski1-0/+2
Add common LED property - the function - to LED node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sc7180-trogdor: add function to LED nodeKrzysztof Kozlowski1-0/+2
Add common LED property - the function - to LED node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: qrb5165-rb5: add function and color to LED nodesKrzysztof Kozlowski1-0/+6
Add common LED properties - the function and color - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: apq8016-sbc: add function and color to LED nodesKrzysztof Kozlowski1-0/+12
Add common LED properties - the function and color - to LED nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8250: Move qup-opp-table out of soc nodeVinod Koul1-19/+19
The soc node expects all the nodes to have unit addresses. The qup-opp-table does not have that which causes warnings: arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5: Warning (simple_bus_reg): /soc@0/qup-opp-table: missing or empty reg/ranges property Move the qup-opp-table out of soc node to fix these warnings Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> [bjorn: Rebased ontop of Krzysztof's node name update] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8350: Move qup-opp-tables out of soc nodeVinod Koul1-38/+38
The soc node expects all the nodes to have unit addresses. The qup-opp-tables do not have that which causes warnings: arch/arm64/boot/dts/qcom/sm8350.dtsi:640.46-657.5: Warning (simple_bus_reg): /soc@0/qup-100mhz-opp-table: missing or empty reg/ranges property arch/arm64/boot/dts/qcom/sm8350.dtsi:659.46-676.5: Warning (simple_bus_reg): /soc@0/qup-120mhz-opp-table: missing or empty reg/ranges property Move the qup-opp-tables out of soc node to fix these warnings Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> [bjorn: Rebased ontop of Krzysztof's node name update] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8450: rename interconnect nodesVinod Koul1-2/+2
clk-virt and mc-virt interconnect nodes were named interconnect@0 and interconnect@1. That is incorrect as we don't have unit addresses 0/1 for these node. This causes warning: arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4: Warning (unit_address_vs_reg): /interconnect@0: node has a unit name, but no reg or ranges property arch/arm64/boot/dts/qcom/sm8450.dtsi:261.26-265.4: Warning (unit_address_vs_reg): /interconnect@1: node has a unit name, but no reg or ranges property arch/arm64/boot/dts/qcom/sm8450.dtsi:255.27-259.4: Warning (unique_unit_address_if_enabled): /interconnect@0: duplicate unit-address (also used in node /soc@0) Rename the nodes to interconnect-0 and interconnect-1 to fix the warning. Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8996-xiaomi-natrium: Add support for Xiaomi Mi 5s PlusAlec Su2-0/+415
Add the device tree for Xiaomi Mi 5s Plus (natrium). Signed-off-by: Alec Su <[email protected]> Reviewed-by: Yassine Oudjana <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02dt-bindings: arm: qcom: Document xiaomi,natrium boardAlec Su1-0/+1
Document Xiaomi Mi 5s Plus (xiaomi-natrium) smartphone which is based on Snapdragon 821 SoC. Signed-off-by: Alec Su <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: ipq6018: correct QUP peripheral labelsRobert Marko2-6/+6
Current QUP peripheral labels like spi_0 and i2c_0 dont really tell what is the exact QUP HW being used as there are actually 6 identical QUP HW blocks for UART, SPI and I2C. For example current i2c_0 label actually points to the QUP2 I2C HW. This style of labeling does not follow what the rest of Qualcomm SoC-s use, for example IPQ8074 which has the identical QUP blocks. It also makes it really hard to add the missing QUP DT nodes as there are multiple missing. So utilize the same style as other Qualcomm SoC-s are using and update the CP01 DTS as its the current sole user of them. Signed-off-by: Robert Marko <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8250: use constants for audio clocksLuca Weiss1-4/+6
The use of these constants was removed during merging, probably because the patches adding those defines and the dts patches were merged through different trees. Re-add them to make it clear which clocks are getting used. Signed-off-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm845*: replace i2s reg with constantLuca Weiss3-4/+4
Make it easier to understand what the reg in those nodes is by using the constants provided by qcom,q6dsp-lpass-ports.h. Signed-off-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8450: Fix the IRQ trigger type for remoteproc nodesManivannan Sadhasivam1-4/+4
The watchdog IRQ trigger type should be EDGE_RISING. So fix all remoteproc nodes. Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8916: Fix typo in pronto remoteproc nodeSireesh Kodali1-2/+2
The smem-state properties for the pronto node were incorrectly labelled, reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing the stop state to be used. Fixes: 88106096cbf8 ("ARM: dts: msm8916: Add and enable wcnss node") Signed-off-by: Sireesh Kodali <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Stephan Gerhold <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor supportMarkuss Broks1-0/+33
This patch adds device tree support for the VL53L0X ToF sensor found on all Yoshino devices. Signed-off-by: Markuss Broks <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sc7280: Add proxy interconnect requirements for modemSibi Sankar1-0/+1
Add interconnects that are required to be proxy voted upon during modem bootup on SC7280 SoCs. Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8450: remove duplicated glink-edge interruptKrzysztof Kozlowski1-1/+0
Specifying interrupts and interrupts-extended is not correct. Keep only the extended ones, routed towards IPCC mailbox to fix warnings like: sm8450-qrd.dtb: glink-edge: More than one condition true in oneOf schema: {'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml', Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sm8350: remove duplicated glink-edge interruptKrzysztof Kozlowski1-1/+0
Specifying interrupts and interrupts-extended is not correct. Keep only the extended ones, routed towards IPCC mailbox to fix warnings like: sm8350-sony-xperia-sagami-pdx214.dtb: glink-edge: More than one condition true in oneOf schema: {'$filename': 'Documentation/devicetree/bindings/remoteproc/qcom,glink-edge.yaml', Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm630: remove unneeded address/size cells in glink-edgeKrzysztof Kozlowski1-2/+0
glink-edge node does not have children with unit addresses: sdm630-sony-xperia-ganges-kirin.dtb: glink-edge: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9] Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: ipq6018: add label to remoteproc nodeKrzysztof Kozlowski1-0/+1
glink-edge bindings require label: ipq6018-cp01-c1.dtb: glink-edge: 'label' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: Remove unused 'vdda-max-microamp' & ↵Bhupesh Sharma3-6/+0
'vdda-pll-max-microamp' properties As Bjorn noted in [1], since the qmp phy driver doesn't use the 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties currently, let's remove them from the dts files as well. Otherwise, it leads to the following '$ make dtbs_check' warning(s): sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+ If later on the driver support is added, we can add these properties back to the dts files. [1]. https://lore.kernel.org/linux-arm-msm/YmQhpsmiYJzR99LK@ripper/ Cc: Bjorn Andersson <[email protected]> Cc: Vinod Koul <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: ipq8074: add USB power domainsRobert Marko1-0/+5
Add USB power domains provided by GCC GDSCs. Add the required #power-domain-cells to the GCC as well. Signed-off-by: Robert Marko <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02Merge branch '[email protected]' into arm64-for-5.20Bjorn Andersson1-0/+3
2022-07-02arm64: dts: qcom: Fix 'reg-names' for sdhci nodesBhupesh Sharma6-8/+8
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports a number of issues with ordering of 'reg-names' as various possible combinations are possible for different qcom SoC dts files. Fix the same by updating the offending 'dts' files. Cc: Bjorn Andersson <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: Fix ordering of 'clocks' & 'clock-names' for sdhci nodesBhupesh Sharma7-38/+40
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports a number of issues with ordering of 'clocks' & 'clock-names' for sdhci nodes: arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: clock-names:0: 'iface' was expected arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: clock-names:1: 'core' was expected arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dtb: sdhci@7824900: clock-names:2: 'xo' was expected Fix the same by updating the offending 'dts' files. Cc: Bjorn Andersson <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm630: Fix 'interconnect-names' for sdhci nodesBhupesh Sharma1-1/+2
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports issues with inconsistent 'interconnect-names' used for sdhci nodes. Fix the same. Cc: Bjorn Andersson <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: Fix sdhci node names - use 'mmc@'Bhupesh Sharma15-24/+24
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports issues with inconsistent 'sdhci@' convention used for specifying the sdhci nodes. The generic mmc bindings expect 'mmc@' format instead. Fix the same. Cc: Bjorn Andersson <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> [bjorn: Moved non-arm64 changes to separate commit] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm630-nile: Add RGB status LED on the PM660L LPGMarijn Suijten1-0/+30
The entire Sony Nile and Ganges lineup utilize the first three channels (the triled channels) of the LPG block for an RGB (battery) status and notification indicator. Signed-off-by: Marijn Suijten <[email protected]> [bjorn: Dropped #address/#size-cells] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: pm660l: Add LPG nodeMarijn Suijten1-0/+6
The Light Pulse Generator describes a hardware block responsible for displaying colors and patterns on an RGB LED (usually used for [battery] status and notifications), and drive PWM signals for general-purpose (ie. backlight) LEDs. The availability and usage of the individual channels differ per board and is hence left for individual platform DTs to configure. Signed-off-by: Marijn Suijten <[email protected]> [bjorn: Dropped #address/size-cells] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1Andrey Konovalov1-2/+19
The current settings refer to "blsp_spi1" function which isn't defined. For this reason an attempt to enable blsp1_spi1 interface results in the probe failure below: [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 Fix this by making the functions used in qcs404.dtsi to match the contents of drivers/pinctrl/qcom/pinctrl-qcs404.c. Signed-off-by: Andrey Konovalov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: qrb5165-rb5: declare tri-led user ledsDmitry Baryshkov1-0/+30
Qualcomm RB5 platform uses Light Pulse Generator tri-led block to drive three green leds. Add device nodes defining those leds. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: pm8150l: add Light Pulse Generator device nodeDmitry Baryshkov1-0/+11
Add device node defining LPG/PWM block on PM8150L PMIC chip. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: pm8150b: add Light Pulse Generator device nodeDmitry Baryshkov1-0/+10
Add device node defining LPG/PWM block on PM8150B PMIC chip. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: align led node names with dtschemaKrzysztof Kozlowski2-5/+5
The node names should be generic and DT schema expects certain pattern with 'led'. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: sdm630-sony-xperia-nile: drop unneeded status from gpio-keysKrzysztof Kozlowski1-1/+0
Nodes do not need explicit status=okay. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-02arm64: dts: qcom: correct gpio-keys propertiesKrzysztof Kozlowski7-21/+7
gpio-keys children do not use unit addresses. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.