aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-30atm/solos-pci: Don't flap VCs when carrier state changesPhilip A. Prindeville3-25/+3
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: Philip A. Prindeville <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30atm/solos-pci: Don't include frame pseudo-header on transmit hex-dumpPhilip A. Prindeville1-1/+8
Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by: Philip Prindeville <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30atm/solos-pci: Use VPI.VCI notation uniformly.Philip A. Prindeville1-2/+2
Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by: Philip Prindeville <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30Atheros, atl2: Fix mem leaks in error paths of atl2_set_eepromJesper Juhl1-8/+14
We leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom(). The memory allocated to 'eeprom_buff' is not freed when we return -EIO. This patch fixes that up and also removes a pointless explicit cast. Signed-off-by: Jesper Juhl <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30netdev: fix mtu check when TSO is enabledDaniel Lezcano1-2/+22
In case the device where is coming from the packet has TSO enabled, we should not check the mtu size value as this one could be bigger than the expected value. This is the case for the macvlan driver when the lower device has TSO enabled. The macvlan inherit this feature and forward the packets without fragmenting them. Then the packets go through dev_forward_skb and are dropped. This patch fix this by checking TSO is not enabled when we want to check the mtu size. Signed-off-by: Daniel Lezcano <[email protected]> Acked-by: "Eric W. Biederman" <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30net/usb: Ethernet quirks for the LG-VL600 4G modemAndrzej Zaborowski6-9/+387
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: Andrzej Zaborowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30phylib: phy_attach_direct: phy_init_hw can fail, add cleanupMarc Kleine-Budde1-2/+6
The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30bridge: mcast snooping, fix length check of snooped MLDv1/2Linus Lüssing1-1/+1
"len = ntohs(ip6h->payload_len)" does not include the length of the ipv6 header itself, which the rest of this function assumes, though. This leads to a length check less restrictive as it should be in the following line for one thing. For another, it very likely leads to an integer underrun when substracting the offset and therefore to a very high new value of 'len' due to its unsignedness. This will ultimately lead to the pskb_trim_rcsum() practically never being called, even in the cases where it should. Signed-off-by: Linus Lüssing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30via-ircc: Pass PCI device pointer to dma_{alloc, free}_coherent()Ben Hutchings1-6/+6
via-ircc has been passing a NULL pointer to DMA allocation functions, which is completely invalid and results in a BUG on PowerPC. Now that we always have the device pointer available, pass it in. Reference: http://bugs.debian.org/619450 Reported-by: Andrew Buckeridge <[email protected]> Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Andrew Buckeridge <[email protected]> [against 2.6.32] Signed-off-by: David S. Miller <[email protected]>
2011-03-30via-ircc: Use pci_{get, set}_drvdata() instead of static pointer variableBen Hutchings1-67/+15
via-ircc still maintains its own array of device pointers in Linux 2.4 style. Worse, it always uses index 0, so it will crash if there are multiple suitable devices in the system. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-30net: gre: provide multicast mappings for ipv4 and ipv6Timo Teräs4-0/+29
My commit 6d55cb91a0020ac0 (gre: fix hard header destination address checking) broke multicast. The reason is that ip_gre used to get ipgre_header() calls with zero destination if we have NOARP or multicast destination. Instead the actual target was decided at ipgre_tunnel_xmit() time based on per-protocol dissection. Instead of allowing the "abuse" of ->header() calls with invalid destination, this creates multicast mappings for ip_gre. This also fixes "ip neigh show nud noarp" to display the proper multicast mappings used by the gre device. Reported-by: Doug Kehn <[email protected]> Signed-off-by: Timo Teräs <[email protected]> Acked-by: Doug Kehn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-29bridge: Fix compilation warning in function br_stp_recalculate_bridge_id()Balaji G1-1/+1
net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’: net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void Signed-off-by: G.Balaji <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-03-29net: Fix warnings caused by MAX_SKB_FRAGS change.David S. Miller1-1/+1
After commit a715dea3c8e9ef2771c534e05ee1d36f65987e64 ("net: Always allocate at least 16 skb frags regardless of page size"), the value of MAX_SKB_FRAGS can now take on either an "unsigned long" or an "int" value. This causes warnings like: net/packet/af_packet.c: In function ‘tpacket_fill_skb’: net/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’ Fix by forcing the constant to be unsigned long, otherwise we have a situation where the type of a system wide constant is variable. Signed-off-by: David S. Miller <[email protected]>
2011-03-29iwlegacy: fix bugs in change_interfaceJohannes Berg1-0/+10
If change_interface gets invoked during a firmware restart, it may crash; prevent that from happening by checking if ctx->vif is assigned. Additionally, in my initial commit I forgot to set the vif->p2p variable correctly, so fix that too. Cc: [email protected] [2.6.38+] Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-03-29carl9170: Fix tx aggregation problems with some clientsChristian Lamparter3-0/+9
Some clients seem to rely upon the reception of BlockAckReqs to flush their rx reorder buffer. In order to fix aggregation for these clients carl9170 should set IEEE80211_TX_STAT_AMPDU_NO_BACK to generate a BlockAckReq if the transmission of an AMPDU subframe fails. This fixes aggregation problems with Intel 5100 Windows STAs (and maybe others as well). Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-03-29iwl3945: disable hw scan by defaultStanislaw Gruszka1-1/+2
After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=683571 and sometimes kernel crashes: https://bugzilla.redhat.com/show_bug.cgi?id=688252 Also with hw scan there are very bad performance on some systems as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=671366 Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default. Signed-off-by: Stanislaw Gruszka <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-03-29wireless: rt2x00: rt2800usb.c add and identify idsXose Vazquez Perez1-3/+7
taken from staging/rt2860 0x0411,0x016f de37cd49b5a54facef174cf34496919857436e8f MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63b0679f7fab88ea1cc26b52db8b574ce7 Belkin F5D8055 0x050d,0x935a 705059a670f3af2b37695e82de0ee58e75e656ed Belkin F6D4050 v1 0x050d,0x935b 5d92fe3387d086fc2f10426fbdb6b86d6cce5a47 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez <[email protected]> Acked-by: Ivo van Doorn <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-03-29iwl3945: do not deprecate software scanStanislaw Gruszka1-4/+2
Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Wey-Yi Guy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-03-29Linux 2.6.39-rc1Linus Torvalds1-2/+2
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds31-1396/+1615
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29Merge branch 'frv' of ↵Linus Torvalds7-27/+76
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv * 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
2011-03-29Merge branch 'stable/bug-fixes-rc1' of ↵Linus Torvalds2-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Use new irq_move functions xen: Convert genirq namespace xen: fix p2m section mismatches xen/p2m: Allocate p2m tracking pages on override xen-gntdev: unlock on error path in gntdev_mmap() xen-gntdev: return -EFAULT on copy_to_user failure
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds7-56/+67
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry watchdog: fix nv_tco section mismatch watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. watchdog: Convert release_resource to release_region/release_mem_region watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
2011-03-29Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix potential memleak
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds409-3705/+2710
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
2011-03-29char/tpm: Fix unitialized usage of data bufferPeter Huewe1-1/+1
This patch fixes information leakage to the userspace by initializing the data buffer to zero. Reported-by: Peter Huewe <[email protected]> Signed-off-by: Peter Huewe <[email protected]> Signed-off-by: Marcel Selhorst <[email protected]> [ Also removed the silly "* sizeof(u8)". If that isn't 1, we have way deeper problems than a simple multiplication can fix. - Linus ] Signed-off-by: Linus Torvalds <[email protected]>
2011-03-29amd64_edac: Fix potential memleakBorislav Petkov1-1/+1
We check the pointers together but at least one of them could be invalid due to failed allocation. Since we cannot continue if either of the two allocations has failed, exit early by freeing them both. Cc: <[email protected]> # 38.x Reported-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Borislav Petkov <[email protected]>
2011-03-29fs: don't use igrab() while holding i_lockDave Chinner3-4/+5
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥ If we are already holding the i_lock, we have a reference to the inode so we can safely use ihold() to gain an extra reference. This avoids hangs due to lock recursion on the i_lock now that the inode_lock is gone and igrab() uses the i_lock itself. Signed-off-by: Dave Chinner <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Ryan Mallon <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds44-192/+329
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-29xen: Use new irq_move functionsThomas Gleixner1-2/+2
These functions take irq_data as an argument and avoid a redundant lookup in the sparse irq case. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Jeremy Fitzhardinge <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-29xen: Convert genirq namespaceThomas Gleixner1-11/+11
Converted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Ian Campbell <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-29xen: fix p2m section mismatchesRandy Dunlap1-2/+2
Fix section mismatch warnings: set_phys_range_identity() is called by __init xen_set_identity(), so also mark set_phys_range_identity() as __init. then: __early_alloc_p2m() is called set_phys_range_identity(), so also mark __early_alloc_p2m() as __init. WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk() The function __early_alloc_p2m() references the function __init extend_brk(). This is often because __early_alloc_p2m lacks a __init annotation or the annotation of extend_brk is wrong. WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk() The function set_phys_range_identity() references the function __init extend_brk(). This is often because set_phys_range_identity lacks a __init annotation or the annotation of extend_brk is wrong. [v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static] Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2011-03-29FRV: Use generic show_interrupts()Thomas Gleixner2-42/+4
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29FRV: Convert genirq namespaceThomas Gleixner4-6/+7
Convert to new function names. Converted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Select GENERIC_HARDIRQS_NO_DEPRECATEDThomas Gleixner2-1/+3
All chips converted Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Convert cpu irq_chip to new functionsThomas Gleixner1-13/+13
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Convert mb93493 irq_chip to new functionsThomas Gleixner1-11/+11
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Convert mb93093 irq_chip to new functionThomas Gleixner1-13/+13
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Convert mb93091 irq_chip to new functionsThomas Gleixner1-13/+13
Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Fix typo from __do_IRQ overhaulThomas Gleixner1-1/+1
Compiles way better. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29frv: Remove stale irq_chip.endThomas Gleixner2-7/+0
irq_chip.end got obsolete with the removal of __do_IRQ(). irq-mb93093.c even lacks an implementation, but nobody noticed that it's broken since commit 88d6e1 in 2006. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29FRV: Do some cleanupsAmerigo Wang3-10/+2
1. frv doesn't support SMP, remove the useless SMP bits. 2. frv has its own alloc_task_struct, so define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR (I am not sure if frv should use generic alloc_task_struct().) Signed-off-by: WANG Cong <[email protected]> Signed-off-by: David Howells <[email protected]>
2011-03-29FRV: Missing node arg in alloc_thread_info_node() macroDavid Howells1-1/+1
There are two alloc_thread_info_node() macros defined (one for debugging and one for normal). The commit that changed them most recently: commit b6a84016bd2598e35ead635147fa53619982648d Author: Eric Dumazet <[email protected]> Date: Tue Mar 22 16:30:42 2011 -0700 Subject: mm: NUMA aware alloc_thread_info_node() didn't add the node argument into the macro argument list for the normal macro. This results in the following error: kernel/fork.c:267:39: error: macro "alloc_thread_info_node" passed 2 arguments, but takes just 1 kernel/fork.c: In function 'dup_task_struct': kernel/fork.c:267: error: 'alloc_thread_info_node' undeclared (first use in this function) kernel/fork.c:267: error: (Each undeclared identifier is reported only once kernel/fork.c:267: error: for each function it appears in.) Signed-off-by: David Howells <[email protected]>
2011-03-29NOMMU: implement access_remote_vmMike Frysinger1-13/+39
Recent vm changes brought in a new function which the core procfs code utilizes. So implement it for nommu systems too to avoid link failures. Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: David Howells <[email protected]> Tested-by: Simon Horman <[email protected]> Tested-by: Ithamar Adema <[email protected]> Acked-by: Greg Ungerer <[email protected]>
2011-03-29gpio: ab8500: Mark brokenThomas Gleixner1-1/+1
This driver is broken in several aspects. 1) old style irq_chip functions. Sigh 2) Abuse of the unlock callback. That's not supposed to be a state machine for evrything and some more. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-29genirq: Remove move_*irq leftoversThomas Gleixner2-14/+0
All users converted to new interface. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-29genirq: Remove compat codeThomas Gleixner14-452/+25
Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-29drivers: Final irq namespace conversionThomas Gleixner33-69/+70
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-29mn10300: Use generic show_interrupts()Thomas Gleixner2-58/+11
Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-29mn10300: Cleanup irq_desc accessThomas Gleixner1-6/+5
The migration needs only access to irq_data. Signed-off-by: Thomas Gleixner <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.