aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-27NFSv2: Fix eof handlingTrond Myklebust1-1/+2
If we received a reply from the server with a zero length read and no error, then that implies we are at eof. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-27Merge tag 'kvm-ppc-fixes-5.3-1' of ↵Radim Krčmář2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc KVM/PPC fix for 5.3 - Fix bug which could leave locks locked in the host on return to a guest.
2019-08-27mfd: rk808: Make PM function declaration staticLee Jones1-1/+1
Avoids: ../drivers/mfd/rk808.c:771:1: warning: symbol 'rk8xx_pm_ops' \ was not declared. Should it be static? Fixes: 5752bc4373b2 ("mfd: rk808: Mark pm functions __maybe_unused") Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-08-27gpio: zynq: Pass irqchip when adding gpiochipLinus Walleij1-16/+21
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Michal Simek <[email protected]> Cc: Shubhrajyoti Datta <[email protected]> Cc: Thierry Reding <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-27netfilter: nf_conntrack_ftp: Fix debug outputThomas Jarosch1-1/+1
The find_pattern() debug output was printing the 'skip' character. This can be a NULL-byte and messes up further pr_debug() output. Output without the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8 kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8 Output with the fix: kernel: nf_conntrack_ftp: Pattern matches! kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter! kernel: nf_conntrack_ftp: Match succeeded! kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645) kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8 Signed-off-by: Thomas Jarosch <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-08-27netfilter: xt_physdev: Fix spurious error message in physdev_mt_checkTodd Seidelmann1-4/+2
Simplify the check in physdev_mt_check() to emit an error message only when passed an invalid chain (ie, NF_INET_LOCAL_OUT). This avoids cluttering up the log with errors against valid rules. For large/heavily modified rulesets, current behavior can quickly overwhelm the ring buffer, because this function gets called on every change, regardless of the rule that was changed. Signed-off-by: Todd Seidelmann <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-08-27rxrpc: Use skb_unshare() rather than skb_cow_data()David Howells5-32/+56
The in-place decryption routines in AF_RXRPC's rxkad security module currently call skb_cow_data() to make sure the data isn't shared and that the skb can be written over. This has a problem, however, as the softirq handler may be still holding a ref or the Rx ring may be holding multiple refs when skb_cow_data() is called in rxkad_verify_packet() - and so skb_shared() returns true and __pskb_pull_tail() dislikes that. If this occurs, something like the following report will be generated. kernel BUG at net/core/skbuff.c:1463! ... RIP: 0010:pskb_expand_head+0x253/0x2b0 ... Call Trace: __pskb_pull_tail+0x49/0x460 skb_cow_data+0x6f/0x300 rxkad_verify_packet+0x18b/0xb10 [rxrpc] rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc] rxrpc_kernel_recv_data+0x126/0x240 [rxrpc] afs_extract_data+0x51/0x2d0 [kafs] afs_deliver_fs_fetch_data+0x188/0x400 [kafs] afs_deliver_to_call+0xac/0x430 [kafs] afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs] afs_make_call+0x282/0x3f0 [kafs] afs_fs_fetch_data+0x164/0x300 [kafs] afs_fetch_data+0x54/0x130 [kafs] afs_readpages+0x20d/0x340 [kafs] read_pages+0x66/0x180 __do_page_cache_readahead+0x188/0x1a0 ondemand_readahead+0x17d/0x2e0 generic_file_read_iter+0x740/0xc10 __vfs_read+0x145/0x1a0 vfs_read+0x8c/0x140 ksys_read+0x4a/0xb0 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by using skb_unshare() instead in the input path for DATA packets that have a security index != 0. Non-DATA packets don't need in-place encryption and neither do unencrypted DATA packets. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Julian Wollrath <[email protected]> Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Use the tx-phase skb flag to simplify tracingDavid Howells12-76/+69
Use the previously-added transmit-phase skbuff private flag to simplify the socket buffer tracing a bit. Which phase the skbuff comes from can now be divined from the skb rather than having to be guessed from the call state. We can also reduce the number of rxrpc_skb_trace values by eliminating the difference between Tx and Rx in the symbols. Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Add a private skb flag to indicate transmission-phase skbsDavid Howells2-1/+3
Add a flag in the private data on an skbuff to indicate that this is a transmission-phase buffer rather than a receive-phase buffer. Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Abstract out rxtx ring cleanupDavid Howells1-16/+17
Abstract out rxtx ring cleanup into its own function from its two callers. This makes it easier to apply the same changes to both. Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Pass the input handler's data skb reference to the Rx ringDavid Howells1-5/+15
Pass the reference held on a DATA skb in the rxrpc input handler into the Rx ring rather than getting an additional ref for this and then dropping the original ref at the end. Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Use info in skbuff instead of reparsing a jumbo packetDavid Howells3-136/+139
Use the information now cached in the skbuff private data to avoid the need to reparse a jumbo packet. We can find all the subpackets by dead reckoning, so it's only necessary to note how many there are, whether the last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK flag set. This is necessary as once recvmsg() can see the packet, it can start modifying it, such as doing in-place decryption. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Signed-off-by: David Howells <[email protected]>
2019-08-27rxrpc: Improve jumbo packet countingDavid Howells3-12/+30
Improve the information stored about jumbo packets so that we don't need to reparse them so much later. Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeffrey Altman <[email protected]>
2019-08-27x86/boot/compressed/64: Fix missing initialization in ↵Kirill A. Shutemov1-1/+1
find_trampoline_placement() Gustavo noticed that 'new' can be left uninitialized if 'bios_start' happens to be less or equal to 'entry->addr + entry->size'. Initialize the variable at the begin of the iteration to the current value of 'bios_start'. Fixes: 0a46fff2f910 ("x86/boot/compressed/64: Fix boot on machines with broken E820 table") Reported-by: "Gustavo A. R. Silva" <[email protected]> Signed-off-by: Kirill A. Shutemov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/20190826133326.7cxb4vbmiawffv2r@box
2019-08-27drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()Lyude Paul1-0/+6
Currently, we don't call dma_set_max_seg_size() for i915 because we intentionally do not limit the segment length that the device supports. However, this results in a warning being emitted if we try to map anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG enabled: [ 7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] [ 7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x20f/0x340 This was originally brought up on https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus there was it wasn't really useful to set a limit (and that dma-debug isn't really all that useful for i915 in the first place). Unfortunately though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for various distro kernels. Since a WARN_ON() will disable automatic problem reporting (and cause any CI with said option enabled to start complaining), we really should just fix the problem. Note that as me and Chris Wilson discussed, the other solution for this would be to make DMA-API not make such assumptions when a driver hasn't explicitly set a maximum segment size. But, taking a look at the commit which originally introduced this behavior, commit 78c47830a5cb ("dma-debug: check scatterlist segments"), there is an explicit mention of this assumption and how it applies to devices with no segment size: Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. So unless there's any concerns (I'm open to discussion!), let's just follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit to silence any warnings. Changes since v3: * Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like just turning it on causes the kernel to spit out bogus WARN_ONs() during some igt tests which would otherwise require teaching igt to disable the various DMA-API debugging options causing this. This is too much work to be worth it, since DMA-API debugging is useless for us. So, we'll just settle with this single patch to squelch WARN_ONs() during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned on for some reason. * Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris Wilson Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Cc: <[email protected]> # v4.18+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit acd674af95d3f627062007429b9c195c6b32361d) Signed-off-by: Jani Nikula <[email protected]>
2019-08-27drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->typeManasi Navare1-1/+1
This patch fixes the intel_configure_pps_for_dsc_encoder() function to use cpu_transcoder instead of encoder->type to select the correct DSC registers that was wrongly used in the original patch for one DSC register isntance. Fixes: 7182414e2530 ("drm/i915/dp: Configure i915 Picture parameter Set registers during DSC enabling") Cc: Ville Syrjala <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Jani Nikula <[email protected]> Cc: <[email protected]> # v5.0+ Signed-off-by: Manasi Navare <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit d4c61c4a16decd8ace8660f22c81609a539fccba) Signed-off-by: Jani Nikula <[email protected]>
2019-08-27drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guestXiong Zhang1-0/+3
The following call trace may exist in linux guest dmesg when guest i915 driver is unloaded. [ 90.776610] [drm:vgt_deballoon_space.isra.0 [i915]] deballoon space: range [0x0 - 0x0] 0 KiB. [ 90.776621] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 [ 90.776691] IP: drm_mm_remove_node+0x4d/0x320 [drm] [ 90.776718] PGD 800000012c7d0067 P4D 800000012c7d0067 PUD 138e4c067 PMD 0 [ 90.777091] task: ffff9adab60f2f00 task.stack: ffffaf39c0fe0000 [ 90.777142] RIP: 0010:drm_mm_remove_node+0x4d/0x320 [drm] [ 90.777573] Call Trace: [ 90.777653] intel_vgt_deballoon+0x4c/0x60 [i915] [ 90.777729] i915_ggtt_cleanup_hw+0x121/0x190 [i915] [ 90.777792] i915_driver_unload+0x145/0x180 [i915] [ 90.777856] i915_pci_remove+0x15/0x20 [i915] [ 90.777890] pci_device_remove+0x3b/0xc0 [ 90.777916] device_release_driver_internal+0x157/0x220 [ 90.777945] driver_detach+0x39/0x70 [ 90.777967] bus_remove_driver+0x51/0xd0 [ 90.777990] pci_unregister_driver+0x23/0x90 [ 90.778019] SyS_delete_module+0x1da/0x240 [ 90.778045] entry_SYSCALL_64_fastpath+0x24/0x87 [ 90.778072] RIP: 0033:0x7f34312af067 [ 90.778092] RSP: 002b:00007ffdea3da0d8 EFLAGS: 00000206 [ 90.778297] RIP: drm_mm_remove_node+0x4d/0x320 [drm] RSP: ffffaf39c0fe3dc0 [ 90.778344] ---[ end trace f4b1bc8305fc59dd ]--- Four drm_mm_node are used to reserve guest ggtt space, but some of them may be skipped and not initialised due to space constraints in intel_vgt_balloon(). If drm_mm_remove_node() is called with uninitialized drm_mm_node, the above call trace occurs. This patch check drm_mm_node's validity before calling drm_mm_remove_node(). Fixes: ff8f797557c7("drm/i915: return the correct usable aperture size under gvt environment") Cc: [email protected] Signed-off-by: Xiong Zhang <[email protected]> Acked-by: Zhenyu Wang <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4776f3529d6b1e47f02904ad1d264d25ea22b27b) Signed-off-by: Jani Nikula <[email protected]>
2019-08-27drm/i915: Do not create a new max_bpc prop for MST connectorsVille Syrjälä1-1/+9
We're not allowed to create new properties after device registration so for MST connectors we need to either create the max_bpc property earlier, or we reuse one we already have. Let's do the latter apporach since the corresponding SST connector already has the prop and its min/max are correct also for the MST connector. The problem was highlighted by commit 4f5368b5541a ("drm/kms: Catch mode_object lifetime errors") which results in the following spew: [ 1330.878941] WARNING: CPU: 2 PID: 1554 at drivers/gpu/drm/drm_mode_object.c:45 __drm_mode_object_add+0xa0/0xb0 [drm] ... [ 1330.879008] Call Trace: [ 1330.879023] drm_property_create+0xba/0x180 [drm] [ 1330.879036] drm_property_create_range+0x15/0x30 [drm] [ 1330.879048] drm_connector_attach_max_bpc_property+0x62/0x80 [drm] [ 1330.879086] intel_dp_add_mst_connector+0x11f/0x140 [i915] [ 1330.879094] drm_dp_add_port.isra.20+0x20b/0x440 [drm_kms_helper] ... Cc: [email protected] Cc: Lyude Paul <[email protected]> Cc: [email protected] Cc: Daniel Vetter <[email protected]> Cc: Sean Paul <[email protected]> Fixes: 5ca0ef8a56b8 ("drm/i915: Add max_bpc property for DP MST") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: José Roberto de Souza <[email protected]> Reviewed-by: Lyude Paul <[email protected]> (cherry picked from commit 1b9bd09630d4db4827cc04d358a41a16a6bc2cb0) Signed-off-by: Jani Nikula <[email protected]>
2019-08-27mfd: rk808: Mark pm functions __maybe_unusedArnd Bergmann1-2/+2
The newly added suspend/resume functions are only used if CONFIG_PM is enabled: drivers/mfd/rk808.c:752:12: error: 'rk8xx_resume' defined but not used [-Werror=unused-function] drivers/mfd/rk808.c:732:12: error: 'rk8xx_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so the compiler can silently drop them when they are not needed. Fixes: 586c1b4125b3 ("mfd: rk808: Add RK817 and RK809 support") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-08-27KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handlingAlexey Kardashevskiy2-4/+8
H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from a guest. Although we verify correctness of TCEs before we do anything with the existing tables, there is a small window when a check in kvmppc_tce_validate might pass and right after that the guest alters the page of TCEs, causing an early exit from the handler and leaving srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap) (real mode) locked. This fixes the bug by jumping to the common exit code with an appropriate unlock. Cc: [email protected] # v4.11+ Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2019-08-26drm/powerplay: Fix Vega20 power reading againKent Russell2-6/+8
For the 40.46 SMU release, they changed CurrSocketPower to AverageSocketPower, but this was changed back in 40.47 so just check if it's 40.46 and make the appropriate change Tested with 40.45, 40.46 and 40.47 successfully Signed-off-by: Kent Russell <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-26drm/powerplay: Fix Vega20 Average Power value v4Kent Russell2-2/+13
The SMU changed reading from CurrSocketPower to AverageSocketPower, so reflect this accordingly. This fixes the issue where Average Power Consumption was being reported as 0 from SMU 40.46-onward v2: Fixed headline prefix v3: Add check for SMU version for proper compatibility v4: Style fix Signed-off-by: Kent Russell <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-26bpf: handle 32-bit zext during constant blindingNaveen N. Rao1-2/+6
Since BPF constant blinding is performed after the verifier pass, the ALU32 instructions inserted for doubleword immediate loads don't have a corresponding zext instruction. This is causing a kernel oops on powerpc and can be reproduced by running 'test_cgroup_storage' with bpf_jit_harden=2. Fix this by emitting BPF_ZEXT during constant blinding if prog->aux->verifier_zext is set. Fixes: a4b1d3c1ddf6cb ("bpf: verifier: insert zero extension according to analysis result") Reported-by: Michael Ellerman <[email protected]> Signed-off-by: Naveen N. Rao <[email protected]> Reviewed-by: Jiong Wang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-26nfp: bpf: fix latency bug when updating stack index registerJiong Wang1-4/+13
NFP is using Local Memory to model stack. LM_addr could be used as base of a 16 32-bit word region of Local Memory. Then, if the stack offset is beyond the current region, the local index needs to be updated. The update needs at least three cycles to take effect, therefore the sequence normally looks like: local_csr_wr[ActLMAddr3, gprB_5] nop nop nop If the local index switch happens on a narrow loads, then the instruction preparing value to zero high 32-bit of the destination register could be counted as one cycle, the sequence then could be something like: local_csr_wr[ActLMAddr3, gprB_5] nop nop immed[gprB_5, 0] However, we have zero extension optimization that zeroing high 32-bit could be eliminated, therefore above IMMED insn won't be available for which case the first sequence needs to be generated. Fixes: 0b4de1ff19bf ("nfp: bpf: eliminate zero extension code-gen") Signed-off-by: Jiong Wang <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-08-26drm/amdgpu: fix dma_fence_wait without referenceChristian König1-12/+15
We need to grab a reference to the fence we wait for. Signed-off-by: Christian König <[email protected]> Reviewed-by: Chunming Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-08-26NFS: Fix writepage(s) error handling to not report errors twiceTrond Myklebust1-8/+13
If writepage()/writepages() saw an error, but handled it without reporting it, we should not be re-reporting that error on exit. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26NFS: Fix spurious EIO read errorsTrond Myklebust3-21/+36
If the client attempts to read a page, but the read fails due to some spurious error (e.g. an ACCESS error or a timeout, ...) then we need to allow other processes to retry. Also try to report errors correctly when doing a synchronous readpage. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26pNFS/flexfiles: Don't time out requests on hard mountsTrond Myklebust1-2/+9
If the mount is hard, we should ignore the 'io_maxretrans' module parameter so that we always keep retrying. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26SUNRPC: Handle connection breakages correctly in call_status()Trond Myklebust1-1/+1
If the connection breaks while we're waiting for a reply from the server, then we want to immediately try to reconnect. Fixes: ec6017d90359 ("SUNRPC fix regression in umount of a secure mount") Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"Trond Myklebust3-25/+0
This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765. The mechanism for aborting I/O is racy, since we are not guaranteed that the request is asleep while we're changing both task->tk_status and task->tk_action. Signed-off-by: Trond Myklebust <[email protected]> Cc: [email protected] # v5.1
2019-08-26SUNRPC: Handle EADDRINUSE and ENOBUFS correctlyTrond Myklebust1-3/+7
If a connect or bind attempt returns EADDRINUSE, that means we want to retry with a different port. It is not a fatal connection error. Similarly, ENOBUFS is not fatal, but just indicates a memory allocation issue. Retry after a short delay. Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26pNFS/flexfiles: Turn off soft RPC callsTrond Myklebust1-5/+10
The pNFS/flexfiles I/O requests are sent with the SOFTCONN flag set, so they automatically time out if the connection breaks. It should therefore not be necessary to have the soft flag set in addition. Fixes: 5f01d9539496 ("nfs41: create NFSv3 DS connection if specified") Signed-off-by: Trond Myklebust <[email protected]>
2019-08-26SUNRPC: Don't handle errors if the bind/connect succeededTrond Myklebust1-11/+24
Don't handle errors in call_bind_status()/call_connect_status() if it turns out that a previous call caused it to succeed. Signed-off-by: Trond Myklebust <[email protected]> Cc: [email protected] # v5.1+
2019-08-26x86/apic: Include the LDR when clearing out APIC registersBandan Das1-0/+4
Although APIC initialization will typically clear out the LDR before setting it, the APIC cleanup code should reset the LDR. This was discovered with a 32-bit KVM guest jumping into a kdump kernel. The stale bits in the LDR triggered a bug in the KVM APIC implementation which caused the destination mapping for VCPUs to be corrupted. Note that this isn't intended to paper over the KVM APIC bug. The kernel has to clear the LDR when resetting the APIC registers except when X2APIC is enabled. This lacks a Fixes tag because missing to clear LDR goes way back into pre git history. [ tglx: Made x2apic_enabled a function call as required ] Signed-off-by: Bandan Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-08-26x86/apic: Do not initialize LDR and DFR for bigsmpBandan Das1-22/+2
Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The bigsmp APIC implementation uses physical destination mode, but it nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with multiple bit being set. This does not cause a functional problem because LDR and DFR are ignored when physical destination mode is active, but it triggered a problem on a 32-bit KVM guest which jumps into a kdump kernel. The multiple bits set unearthed a bug in the KVM APIC implementation. The code which creates the logical destination map for VCPUs ignores the disabled state of the APIC and ends up overwriting an existing valid entry and as a result, APIC calibration hangs in the guest during kdump initialization. Remove the bogus LDR/DFR initialization. This is not intended to work around the KVM APIC bug. The LDR/DFR ininitalization is wrong on its own. The issue goes back into the pre git history. The fixes tag is the commit in the bitkeeper import which introduced bigsmp support in 2003. git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems") Suggested-by: Thomas Gleixner <[email protected]> Signed-off-by: Bandan Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-08-26arc: prefer __section from compiler_attributes.hNick Desaulniers2-6/+5
Reported-by: Sedat Dilek <[email protected]> Suggested-by: Josh Poimboeuf <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2019-08-26dt-bindings: IDU-intc: Add support for edge-triggered interruptsMischa Jonker1-5/+14
This updates the documentation for supporting an optional extra interrupt cell to specify edge vs level triggered. Signed-off-by: Mischa Jonker <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2019-08-26dt-bindings: IDU-intc: Clean up documentationMischa Jonker1-4/+5
* Some lines exceeded 80 characters. * Clarified statement about AUX register interface Signed-off-by: Mischa Jonker <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2019-08-26ARCv2: IDU-intc: Add support for edge-triggered interruptsMischa Jonker2-6/+65
This adds support for an optional extra interrupt cell to specify edge vs level triggered. It is backward compatible with dts files with only one cell, and will default to level-triggered in such a case. Note that I had to make a change to idu_irq_set_affinity as well, as this function was setting the interrupt type to "level" unconditionally, since this was the only type supported previously. Signed-off-by: Mischa Jonker <[email protected]> Reviewed-by: Vineet Gupta <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2019-08-26ALSA: oxfw: fix to handle correct stream for PCM playbackTakashi Sakamoto1-1/+1
When userspace application calls ioctl(2) to configure hardware for PCM playback substream, ALSA OXFW driver handles incoming AMDTP stream. In this case, outgoing AMDTP stream should be handled. This commit fixes the bug for v5.3-rc kernel. Fixes: 4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback") Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-08-26uprobes/x86: Fix detection of 32-bit user modeSebastian Mayr1-7/+10
32-bit processes running on a 64-bit kernel are not always detected correctly, causing the process to crash when uretprobes are installed. The reason for the crash is that in_ia32_syscall() is used to determine the process's mode, which only works correctly when called from a syscall. In the case of uretprobes, however, the function is called from a exception and always returns 'false' on a 64-bit kernel. In consequence this leads to corruption of the process's return address. Fix this by using user_64bit_mode() instead of in_ia32_syscall(), which is correct in any situation. [ tglx: Add a comment and the following historical info ] This should have been detected by the rename which happened in commit abfb9498ee13 ("x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()") which states in the changelog: The is_ia32_task()/is_x32_task() function names are a big misnomer: they suggests that the compat-ness of a system call is a task property, which is not true, the compatness of a system call purely depends on how it was invoked through the system call layer. ..... and then it went and blindly renamed every call site. Sadly enough this was already mentioned here: 8faaed1b9f50 ("uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr()") where the changelog says: TODO: is_ia32_task() is not what we actually want, TS_COMPAT does not necessarily mean 32bit. Fortunately syscall-like insns can't be probed so it actually works, but it would be better to rename and use is_ia32_frame(). and goes all the way back to: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions") Oh well. 7+ years until someone actually tried a uretprobe on a 32bit process on a 64bit kernel.... Fixes: 0326f5a94dde ("uprobes/core: Handle breakpoint and singlestep exceptions") Signed-off-by: Sebastian Mayr <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-08-26MAINTAINERS: Remove stale record for gpio-intel-mid.cAndy Shevchenko1-6/+0
David Cohen seems left Intel few years back. Remove the stale record in MAINTAINERS data base. The file is anyway listed under my maintainership. Reported-by: Dave Hansen <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-08-26x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machinesThomas Gleixner1-1/+7
Rahul Tanwar reported the following bug on DT systems: > 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is > updated to the end of hardware IRQ numbers but this is done only when IOAPIC > configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is > a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration > comes from devicetree. > > See dtb_add_ioapic() in arch/x86/kernel/devicetree.c > > In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base' > remains to zero initialized value. This means that for OF based systems, > virtual IRQ base will get set to zero. Such systems will very likely not even boot. For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead. Reported-by: Rahul Tanwar <[email protected]> Tested-by: Rahul Tanwar <[email protected]> Tested-by: Andy Shevchenko <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-08-25r8152: Set memory to all 0xFFs on failed reg readsPrashant Malani1-1/+4
get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed. This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is: ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers(). So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails. This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com). Signed-off-by: Prashant Malani <[email protected]> Acked-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-25openvswitch: Fix conntrack cache with timeoutYi-Hung Wei1-0/+13
This patch addresses a conntrack cache issue with timeout policy. Currently, we do not check if the timeout extension is set properly in the cached conntrack entry. Thus, after packet recirculate from conntrack action, the timeout policy is not applied properly. This patch fixes the aforementioned issue. Fixes: 06bd2bdf19d2 ("openvswitch: Add timeout support to ct action") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Yi-Hung Wei <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-25ipv4: mpls: fix mpls_xmit for iptunnelAlexey Kodanev1-4/+4
When using mpls over gre/gre6 setup, rt->rt_gw4 address is not set, the same for rt->rt_gw_family. Therefore, when rt->rt_gw_family is checked in mpls_xmit(), neigh_xmit() call is skipped. As a result, such setup doesn't work anymore. This issue was found with LTP mpls03 tests. Fixes: 1550c171935d ("ipv4: Prepare rtable for IPv6 gateway") Signed-off-by: Alexey Kodanev <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-25nexthop: Fix nexthop_num_path for blackhole nexthopsDavid Ahern1-6/+0
Donald reported this sequence: ip next add id 1 blackhole ip next add id 2 blackhole ip ro add 1.1.1.1/32 nhid 1 ip ro add 1.1.1.2/32 nhid 2 would cause a crash. Backtrace is: [ 151.302790] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 151.304043] CPU: 1 PID: 277 Comm: ip Not tainted 5.3.0-rc5+ #37 [ 151.305078] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014 [ 151.306526] RIP: 0010:fib_add_nexthop+0x8b/0x2aa [ 151.307343] Code: 35 f7 81 48 8d 14 01 c7 02 f1 f1 f1 f1 c7 42 04 01 f4 f4 f4 48 89 f2 48 c1 ea 03 65 48 8b 0c 25 28 00 00 00 48 89 4d d0 31 c9 <80> 3c 02 00 74 08 48 89 f7 e8 1a e8 53 ff be 08 00 00 00 4c 89 e7 [ 151.310549] RSP: 0018:ffff888116c27340 EFLAGS: 00010246 [ 151.311469] RAX: dffffc0000000000 RBX: ffff8881154ece00 RCX: 0000000000000000 [ 151.312713] RDX: 0000000000000004 RSI: 0000000000000020 RDI: ffff888115649b40 [ 151.313968] RBP: ffff888116c273d8 R08: ffffed10221e3757 R09: ffff888110f1bab8 [ 151.315212] R10: 0000000000000001 R11: ffff888110f1bab3 R12: ffff888115649b40 [ 151.316456] R13: 0000000000000020 R14: ffff888116c273b0 R15: ffff888115649b40 [ 151.317707] FS: 00007f60b4d8d800(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 [ 151.319113] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.320119] CR2: 0000555671ffdc00 CR3: 00000001136ba005 CR4: 0000000000020ee0 [ 151.321367] Call Trace: [ 151.321820] ? fib_nexthop_info+0x635/0x635 [ 151.322572] fib_dump_info+0xaa4/0xde0 [ 151.323247] ? fib_create_info+0x2431/0x2431 [ 151.324008] ? napi_alloc_frag+0x2a/0x2a [ 151.324711] rtmsg_fib+0x2c4/0x3be [ 151.325339] fib_table_insert+0xe2f/0xeee ... fib_dump_info incorrectly has nhs = 0 for blackhole nexthops, so it believes the nexthop object is a multipath group (nhs != 1) and ends up down the nexthop_mpath_fill_node() path which is wrong for a blackhole. The blackhole check in nexthop_num_path is leftover from early days of the blackhole implementation which did not initialize the device. In the end the design was simpler (fewer special case checks) to set the device to loopback in nh_info, so the check in nexthop_num_path should have been removed. Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: Donald Sharp <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-25Linux 5.3-rc6Linus Torvalds1-1/+1
2019-08-25Merge tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linuxLinus Torvalds1-2/+2
Pull auxdisplay cleanup from Miguel Ojeda: "Make ht16k33_fb_fix and ht16k33_fb_var constant (Nishka Dasgupta)" * tag 'auxdisplay-for-linus-v5.3-rc7' of git://github.com/ojeda/linux: auxdisplay: ht16k33: Make ht16k33_fb_fix and ht16k33_fb_var constant
2019-08-25Merge tag 'for-linus-5.3-rc6' of ↵Linus Torvalds3-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML fix from Richard Weinberger: "Fix time travel mode" * tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: fix time travel mode
Powered by cgit, Gruvboxed by Blaster4385.