| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Parallel dio write takes a negative refcount of fi->iocachectr and so does
open of file in passthrough mode.
The refcount of passthrough mode is associated with attach/detach of a
fuse_backing object to fuse inode.
For parallel dio write, the backing file is irrelevant, so the call to
fuse_inode_uncached_io_start() passes a NULL fuse_backing object.
Passing a NULL fuse_backing will result in false -EBUSY error if the file
is already open in passthrough mode.
Allow taking negative fi->iocachectr refcount with NULL fuse_backing,
because it does not conflict with an already attached fuse_backing object.
Fixes: 4a90451bbc7f ("fuse: implement open in passthrough mode")
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
There is a confusion with fuse_file_uncached_io_{start,end} interface.
These helpers do two things when called from passthrough open()/release():
1. Take/drop negative refcount of fi->iocachectr (inode uncached io mode)
2. State change ff->iomode IOM_NONE <-> IOM_UNCACHED (file uncached open)
The calls from parallel dio write path need to take a reference on
fi->iocachectr, but they should not be changing ff->iomode state, because
in this case, the fi->iocachectr reference does not stick around until file
release().
Factor out helpers fuse_inode_uncached_io_{start,end}, to be used from
parallel dio write path and rename fuse_file_*cached_io_{start,end} helpers
to fuse_file_*cached_io_{open,release} to clarify the difference.
Fixes: 205c1d802683 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models,
having the same name "Quectel EM060K-GL" and the same interface layout.
MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0129 Rev= 5.04
S: Manufacturer=Quectel
S: Product=Quectel EM060K-GL
S: SerialNumber=f6fa08b6
C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Jerry Meng <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
Update the USB serial option driver support for the Fibocom
FM135-GL LTE modules.
- VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM
interface for /Linux/Chrome OS)
0x0115: mbim, diag, at, pipe
Here are the outputs of usb-devices:
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0115 Rev=05.15
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom Module
S: SerialNumber=12345678
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: bolan wang <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.9-rc5
This includes following USB4/Thunderbolt fixes for v6.9-rc5:
- Avoid creating DisplayPort tunnels for the adapters on the same router
- Correct wake configurations after device router unplug
- Fix immediate wake when "wakeup_count" is used to enter system sleep.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
thunderbolt: Do not create DisplayPort tunnels on adapters of the same router
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This adds a small (64 bit) per-device bitmap that tracks ranges that
have btree nodes, for accelerating btree node scan if it is ever needed.
- New helpers, bch2_dev_btree_bitmap_marked() and
bch2_dev_bitmap_mark(), for checking and updating the bitmap
- Interior btree update path updates the bitmaps when required
- The check_allocations pass has a new fsck_err check,
btree_bitmap_not_marked
- New on disk format version, mi_btree_mitmap, which indicates the new
bitmap is present
- Upgrade table lists the required recovery pass and expected fsck error
- Btree node scan uses the bitmap to skip ranges if we're on the new
version
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Add a sysfs knob for immediately flushing the entire journal.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
We shouldn't be doing the unlock/relock dance when we're not using a
path - this fixes an assertion pop when called from btree node scan.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
- Address a (valid) W=1 build warning
- Fix timer self-tests
- Annotate a KCSAN warning wrt. accesses to the tick_do_timer_cpu
global variable
- Address a !CONFIG_BUG build warning
* tag 'timers-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: kselftest: Fix build failure with NOLIBC
selftests: timers: Fix abs() warning in posix_timers test
selftests: kselftest: Mark functions that unconditionally call exit() as __noreturn
selftests: timers: Fix posix_timers ksft_print_msg() warning
selftests: timers: Fix valid-adjtimex signed left-shift undefined behavior
bug: Fix no-return-statement warning with !CONFIG_BUG
timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpu
selftests/timers/posix_timers: Reimplement check_timer_distribution()
irqflags: Explicitly ignore lockdep_hrtimer_exit() argument
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix the x86 PMU multi-counter code returning invalid data in certain
circumstances"
* tag 'perf-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix out of range data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a PREEMPT_RT build bug"
* tag 'locking-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Make rwsem_assert_held_write_nolockdep() build with PREEMPT_RT=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"Fix a bug in the GIC irqchip driver"
* tag 'irq-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1
|
|
Pull virtio bugfixes from Michael Tsirkin:
"Some small, obvious (in hindsight) bugfixes:
- new ioctl in vhost-vdpa has a wrong # - not too late to fix
- vhost has apparently been lacking an smp_rmb() - due to code
duplication :( The duplication will be fixed in the next merge
cycle, this is a minimal fix
- an error message in vhost talks about guest moving used index -
which of course never happens, guest only ever moves the available
index
- i2c-virtio didn't set the driver owner so it did not get refcounted
correctly"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct misleading printing information
vhost-vdpa: change ioctl # for VDPA_GET_VRING_SIZE
virtio: store owner from modules with register_virtio_driver()
vhost: Add smp_rmb() in vhost_enable_notify()
vhost: Add smp_rmb() in vhost_vq_avail_empty()
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix up swiotlb buffer padding even more (Petr Tesarik)
- fix for partial dma_sync on swiotlb (Michael Kelley)
- swiotlb debugfs fix (Dexuan Cui)
* tag 'dma-maping-6.9-2024-04-14' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: do not set total_used to 0 in swiotlb_create_debugfs_files()
swiotlb: fix swiotlb_bounce() to do partial sync's correctly
swiotlb: extend buffer pre-padding to alloc_align_mask if necessary
|
|
Add FAULT_INJECTION_DEBUG_FS and FAILSLAB configurations to the kconfig
fragment for the iommfd selftests. These kconfigs are needed by the
iommufd_fail_nth test.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
Some kconfigs don't automatically include this symbol which results in sub
functions for some of the dirty tracking related things that are
non-functional. Thus the test suite will fail. select IOMMUFD_DRIVER in
the IOMMUFD_TEST kconfig to fix it.
Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP")
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Muhammad Usama Anjum <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
The commit fc8b2a619469
("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
adds check of potential number of UDP segments vs
UDP_MAX_SEGMENTS in linux/virtio_net.h.
After this change certification test of USO guest-to-guest
transmit on Windows driver for virtio-net device fails,
for example with packet size of ~64K and mss of 536 bytes.
In general the USO should not be more restrictive than TSO.
Indeed, in case of unreasonably small mss a lot of segments
can cause queue overflow and packet loss on the destination.
Limit of 128 segments is good for any practical purpose,
with minimal meaningful mss of 536 the maximal UDP packet will
be divided to ~120 segments.
The number of segments for UDP packets is validated vs
UDP_MAX_SEGMENTS also in udp.c (v4,v6), this does not affect
quest-to-guest path but does affect packets sent to host, for
example.
It is important to mention that UDP_MAX_SEGMENTS is kernel-only
define and not available to user mode socket applications.
In order to request MSS smaller than MTU the applications
just uses setsockopt with SOL_UDP and UDP_SEGMENT and there is
no limitations on socket API level.
Fixes: fc8b2a619469 ("net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation")
Signed-off-by: Yuri Benditovich <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.
This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.
[ 9.410890] ==================================================================
[ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1
[ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5
[ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[ 9.460789] Call Trace:
[ 9.463518] <TASK>
[ 9.465859] dump_stack_lvl+0x53/0x70
[ 9.469949] print_report+0xce/0x610
[ 9.473944] ? __virt_addr_valid+0xf5/0x1b0
[ 9.478619] ? memblock_isolate_range+0x12d/0x260
[ 9.483877] kasan_report+0xc6/0x100
[ 9.487870] ? memblock_isolate_range+0x12d/0x260
[ 9.493125] memblock_isolate_range+0x12d/0x260
[ 9.498187] memblock_phys_free+0xb4/0x160
[ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10
[ 9.508021] ? mutex_unlock+0x7e/0xd0
[ 9.512111] ? __pfx_mutex_unlock+0x10/0x10
[ 9.516786] ? kernel_init_freeable+0x2d4/0x430
[ 9.521850] ? __pfx_kernel_init+0x10/0x10
[ 9.526426] xbc_exit+0x17/0x70
[ 9.529935] kernel_init+0x38/0x1e0
[ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30
[ 9.538601] ret_from_fork+0x2c/0x50
[ 9.542596] ? __pfx_kernel_init+0x10/0x10
[ 9.547170] ret_from_fork_asm+0x1a/0x30
[ 9.551552] </TASK>
[ 9.555649] The buggy address belongs to the physical page:
[ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[ 9.570821] flags: 0x200000000000000(node=0|zone=2)
[ 9.576271] page_type: 0xffffffff()
[ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 9.597476] page dumped because: kasan: bad access detected
[ 9.605362] Memory state around the buggy address:
[ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.634930] ^
[ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.654675] ==================================================================
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: [email protected]
Signed-off-by: Qiang Zhang <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
The writable file /sys/power/resume may call vfs lookup helpers for
arbitrary paths and readonly files can be read by overlayfs from vfs
helpers when sysfs is a lower layer of overalyfs.
To avoid a lockdep warning of circular dependency between overlayfs
inode lock and kernfs of->mutex, use a different lockdep class for
writable and readonly kernfs files.
Reported-by: [email protected]
Fixes: 0fedefd4c4e3 ("kernfs: sysfs: support custom llseek method for sysfs entries")
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Amir Goldstein <[email protected]>
Signed-off-by: Al Viro <[email protected]>
|
|
Confusingly, X86_FEATURE_RETPOLINE doesn't mean retpolines are enabled,
as it also includes the original "AMD retpoline" which isn't a retpoline
at all.
Also replace cpu_feature_enabled() with boot_cpu_has() because this is
before alternatives are patched and cpu_feature_enabled()'s fallback
path is slower than plain old boot_cpu_has().
Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob")
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Pawan Gupta <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Link: https://lore.kernel.org/r/ad3807424a3953f0323c011a643405619f2a4927.1712944776.git.jpoimboe@kernel.org
|
|
The btree write buffer flush fastpath that avoids the main transaction
commit path had the unfortunate side effect of not doing btree node
merging.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
There's been a bug in the btree write buffer where it wasn't triggering
btree node merges - and leaving behind a bunch of nearly empty btree
nodes.
Then during journal replay, when updates to the backpointers btree
aren't using the btree write buffer (because we require synchronization
with journal replay), we end up doing those merges all at once.
Then if it's the interior update path running them, we deadlock because
those run with the highest watermark.
There's no real need for the interior update path to be doing btree node
merges; other code paths can handle that at lower watermarks.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This fixes a deadlock where the interior update path during journal
replay ends up doing a ton of merges on the backpointers btree, and
deadlocking.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
bch2_journal_flush_seq requires us to have a write ref
Signed-off-by: Kent Overstreet <[email protected]>
|
|
btree_key_can_insert_cached() should be checking the watermark -
BCH_TRANS_COMMIT_journal_replay really means nonblocking mode when
watermark < reclaim, it was being used incorrectly.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
This fixes a bug where we fail to start when upgrading/downgrading
because we forgot we needed to go rw.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
many nodes found during scan will be old nodes, overwritten by newer
nodes
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
.to_text() functions need to work on key values that didn't pass .valid
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Need to check if we have a valid bucket before checking if ptr is stale
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Signed-off-by: Kent Overstreet <[email protected]>
|
|
add missing validation; fixes assertion pop in bkey unpack
Signed-off-by: Kent Overstreet <[email protected]>
|
|
The btree paths array is now dynamically resizable - and as well the
btree_insert_entries array, as it needs to be the same size.
The merge path (and interior update path) allocates new btree paths,
thus can trigger a resize; thus we need to not retain direct pointers
after invoking merge; similarly when running btree node triggers.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Add the mask_port_map parameter to the ahci driver. This is a
follow-up to the recent snafu with the ASMedia controller and its
virtual port hidding port-multiplier devices. As ASMedia confirmed
that there is no way to determine if these slow-to-probe virtual
ports are actually representing the ports of a port-multiplier
devices, this new parameter allow masking ports to significantly
speed up probing during system boot, resulting in shorter boot times.
- A fix for an incorrect handling of a port unlock in
ata_scsi_dev_rescan().
- Allow command duration limits to be detected for ACS-4 devices are
there are such devices out in the field.
* tag 'ata-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Allow command duration limits detection for ACS-4 drives
ata: libata-scsi: Fix ata_scsi_dev_rescan() error path
ata: ahci: Add mask_port_map module parameter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- Suppress a coccicheck warning using str_plural()
* tag 'zonefs-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Use str_plural() to fix Coccinelle warning
|
|
Pull smb client fixes from Steve French:
- fix for oops in cifs_get_fattr of deleted files
- fix for the remote open counter going negative in some directory
lease cases
- fix for mkfifo to instantiate dentry to avoid possible crash
- important fix to allow handling key rotation for mount and remount
(ie cases that are becoming more common when password that was used
for the mount will expire soon but will be replaced by new password)
* tag 'v6.9-rc3-SMB3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix broken reconnect when password changing on the server by allowing password rotation
smb: client: instantiate when creating SFU files
smb3: fix Open files on server counter going negative
smb: client: fix NULL ptr deref in cifs_mark_open_handles_for_deleted_file()
|
|
If CONFIG_SERIAL_CORE_CONSOLE is not set, we get build errors.
Let's fix the issue by moving the endif after the serial base console
functions.
Fixes: 4547cd76f08a ("serial: 8250: Fix add preferred console for serial8250_isa_init_ports()")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Tariq Toukan says:
====================
mlx5 fixes
This patchset provides bug fixes to mlx5 core and Eth drivers.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When disabling aRFS under the `priv->state_lock`, any scheduled
aRFS works are canceled using the `cancel_work_sync` function,
which waits for the work to end if it has already started.
However, while waiting for the work handler, the handler will
try to acquire the `state_lock` which is already acquired.
The worker acquires the lock to delete the rules if the state
is down, which is not the worker's responsibility since
disabling aRFS deletes the rules.
Add an aRFS state variable, which indicates whether the aRFS is
enabled and prevent adding rules when the aRFS is disabled.
Kernel log:
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I
------------------------------------------------------
ethtool/386089 is trying to acquire lock:
ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0
but task is already holding lock:
ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&priv->state_lock){+.+.}-{3:3}:
__mutex_lock+0x80/0xc90
arfs_handle_work+0x4b/0x3b0 [mlx5_core]
process_one_work+0x1dc/0x4a0
worker_thread+0x1bf/0x3c0
kthread+0xd7/0x100
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
-> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}:
__lock_acquire+0x17b4/0x2c80
lock_acquire+0xd0/0x2b0
__flush_work+0x7a/0x4e0
__cancel_work_timer+0x131/0x1c0
arfs_del_rules+0x143/0x1e0 [mlx5_core]
mlx5e_arfs_disable+0x1b/0x30 [mlx5_core]
mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core]
ethnl_set_channels+0x28f/0x3b0
ethnl_default_set_doit+0xec/0x240
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x188/0x2c0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1a1/0x270
netlink_sendmsg+0x214/0x460
__sock_sendmsg+0x38/0x60
__sys_sendto+0x113/0x170
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&priv->state_lock);
lock((work_completion)(&rule->arfs_work));
lock(&priv->state_lock);
lock((work_completion)(&rule->arfs_work));
*** DEADLOCK ***
3 locks held by ethtool/386089:
#0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
#1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240
#2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core]
stack backtrace:
CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x60/0xa0
check_noncircular+0x144/0x160
__lock_acquire+0x17b4/0x2c80
lock_acquire+0xd0/0x2b0
? __flush_work+0x74/0x4e0
? save_trace+0x3e/0x360
? __flush_work+0x74/0x4e0
__flush_work+0x7a/0x4e0
? __flush_work+0x74/0x4e0
? __lock_acquire+0xa78/0x2c80
? lock_acquire+0xd0/0x2b0
? mark_held_locks+0x49/0x70
__cancel_work_timer+0x131/0x1c0
? mark_held_locks+0x49/0x70
arfs_del_rules+0x143/0x1e0 [mlx5_core]
mlx5e_arfs_disable+0x1b/0x30 [mlx5_core]
mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core]
ethnl_set_channels+0x28f/0x3b0
ethnl_default_set_doit+0xec/0x240
genl_family_rcv_msg_doit+0xd0/0x120
genl_rcv_msg+0x188/0x2c0
? ethnl_ops_begin+0xb0/0xb0
? genl_family_rcv_msg_dumpit+0xf0/0xf0
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1a1/0x270
netlink_sendmsg+0x214/0x460
__sock_sendmsg+0x38/0x60
__sys_sendto+0x113/0x170
? do_user_addr_fault+0x53f/0x8f0
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x40/0xe0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
</TASK>
Fixes: 45bf454ae884 ("net/mlx5e: Enabling aRFS mechanism")
Signed-off-by: Carolina Jubran <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
netif_queue_set_napi asserts whether RTNL lock is held if
the netdev is initialized.
Acquire the RTNL lock before activating or deactivating
RQs/SQs if the lock has not been held before in the flow.
Fixes: f25e7b82635f ("net/mlx5e: link NAPI instances to queues and IRQs")
Cc: Joe Damato <[email protected]>
Signed-off-by: Carolina Jubran <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
coalescing
Channels can potentially have independent mdev instances. Do not refer to
the global mdev instance in the mlx5e_priv instance for channel FW
operations related to coalescing. CQ numbers that would be valid on the
channel's mdev instance may not be correctly referenced if using the
mlx5e_priv instance.
Fixes: 67936e138586 ("net/mlx5e: Let channels be SD-aware")
Signed-off-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Code parts from cited commit were mistakenly dropped while rebasing
before submission. Add them here.
Fixes: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock")
Signed-off-by: Shay Drory <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|