| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Remove the vendor check when selecting MWAIT as the default idle
state
- Respect idle=nomwait when supplied on the kernel cmdline
- Two small cleanups
* tag 'x86_cpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Use MSR_IA32_MISC_ENABLE constants
x86: Fix comment for X86_FEATURE_ZEN
x86: Remove vendor checks from prefer_mwait_c1_over_halt
x86: Handle idle=nomwait cmdline properly for x86_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu update from Borislav Petkov:
- Add machinery to initialize AMX register state in order for
AMX-capable CPUs to be able to enter deeper low-power state
* tag 'x86_fpu_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Add a new flag to initialize the AMX state
x86/fpu: Add a helper to prepare AMX state for low-power CPU idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Rename a PKRU macro to make more sense when reading the code
- Update pkeys documentation
- Avoid reading contended mm's TLB generation var if not absolutely
necessary along with fixing a case where arch_tlbbatch_flush()
doesn't adhere to the generation scheme and thus violates the
conditions for the above avoidance.
* tag 'x86_mm_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/tlb: Ignore f->new_tlb_gen when zero
x86/pkeys: Clarify PKRU_AD_KEY macro
Documentation/protection-keys: Clean up documentation for User Space pkeys
x86/mm/tlb: Avoid reading mm_tlb_gen when possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanup from Borislav Petkov:
- A single CONFIG_ symbol correction in a comment
* tag 'x86_cleanups_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Refer to the intended config STRICT_DEVMEM in a comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vmware cleanup from Borislav Petkov:
- A single statement simplification by using the BIT() macro
* tag 'x86_vmware_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmware: Use BIT() macro for shifting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
"A single RAS change:
- Probe whether hardware error injection (direct MSR writes) is
possible when injecting errors on AMD platforms. In some cases, the
platform could prohibit those"
* tag 'ras_core_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Check whether writes to MCA_STATUS are getting ignored
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull acl updates from Christian Brauner:
"Last cycle we introduced support for mounting overlayfs on top of
idmapped mounts. While looking into additional testing we realized
that posix acls don't really work correctly with stacking filesystems
on top of idmapped layers.
We already knew what the fix were but it would require work that is
more suitable for the merge window so we turned off posix acls for
v5.19 for overlayfs on top of idmapped layers with Miklos routing my
patch upstream in 72a8e05d4f66 ("Merge tag 'ovl-fixes-5.19-rc7' [..]").
This contains the work to support posix acls for overlayfs on top of
idmapped layers. Since the posix acl fixes should use the new
vfs{g,u}id_t work the associated branch has been merged in. (We sent a
pull request for this earlier.)
We've also pulled in Miklos pull request containing my patch to turn
of posix acls on top of idmapped layers. This allowed us to avoid
rebasing the branch which we didn't like because we were already at
rc7 by then. Merging it in allows this branch to first fix posix acls
and then to cleanly revert the temporary fix it brought in by commit
4a47c6385bb4 ("ovl: turn of SB_POSIXACL with idmapped layers
temporarily").
The last patch in this series adds Seth Forshee as a co-maintainer for
idmapped mounts. Seth has been integral to all of this work and is
also the main architect behind the filesystem idmapping work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to help and he has my full trust. This
increases the bus factor which is always great for work like this. I'm
honestly very excited about this because I think in general we don't
do great in the bringing on new maintainers department"
For more explanations of the ACL issues, see
https://lore.kernel.org/all/[email protected]/
* tag 'fs.idmapped.overlay.acl.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
Add Seth Forshee as co-maintainer for idmapped mounts
Revert "ovl: turn of SB_POSIXACL with idmapped layers temporarily"
ovl: handle idmappings in ovl_get_acl()
acl: make posix_acl_clone() available to overlayfs
acl: port to vfs{g,u}id_t
acl: move idmapped mount fixup into vfs_{g,s}etxattr()
mnt_idmapping: add vfs[g,u]id_into_k[g,u]id()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fs idmapping updates from Christian Brauner:
"This introduces the new vfs{g,u}id_t types we agreed on. Similar to
k{g,u}id_t the new types are just simple wrapper structs around
regular {g,u}id_t types.
They allow to establish a type safety boundary in the VFS for idmapped
mounts preventing confusion betwen {g,u}ids mapped into an idmapped
mount and {g,u}ids mapped into the caller's or the filesystem's
idmapping.
An initial set of helpers is introduced that allows to operate on
vfs{g,u}id_t types. We will remove all references to non-type safe
idmapped mounts helpers in the very near future. The patches do
already exist.
This converts the core attribute changing codepaths which become
significantly easier to reason about because of this change.
Just a few highlights here as the patches give detailed overviews of
what is happening in the commit messages:
- The kernel internal struct iattr contains type safe vfs{g,u}id_t
values clearly communicating that these values have to take a given
mount's idmapping into account.
- The ownership values placed in struct iattr to change ownership are
identical for idmapped and non-idmapped mounts going forward. This
also allows to simplify stacking filesystems such as overlayfs that
change attributes In other words, they always represent the values.
- Instead of open coding checks for whether ownership changes have
been requested and an actual update of the inode is required we now
have small static inline wrappers that abstract this logic away
removing a lot of code duplication from individual filesystems that
all open-coded the same checks"
* tag 'fs.idmapped.vfsuid.v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mnt_idmapping: align kernel doc and parameter order
mnt_idmapping: use new helpers in mapped_fs{g,u}id()
fs: port HAS_UNMAPPED_ID() to vfs{g,u}id_t
mnt_idmapping: return false when comparing two invalid ids
attr: fix kernel doc
attr: port attribute changes to new types
security: pass down mount idmapping to setattr hook
quota: port quota helpers mount ids
fs: port to iattr ownership update helpers
fs: introduce tiny iattr ownership update helpers
fs: use mount types in iattr
fs: add two type safe mapping helpers
mnt_idmapping: add vfs{g,u}id_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of flock() patches from Kuniyuki Iwashima.
The main change is that this moves a file_lock allocation from the
slab to the stack"
* tag 'filelock-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fs/lock: Rearrange ops in flock syscall.
fs/lock: Don't allocate file_lock in flock_make_lock().
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"First of all, we'd like to add Yue Hu and Jeffle Xu as two new
reviewers. Thank them for spending time working on EROFS!
There is no major feature outstanding in this cycle, mainly a patchset
I worked on to prepare for rolling hash deduplication and folios for
compressed data as the next big features. It kills the unneeded
PG_error flag dependency as well.
Apart from that, there are bugfixes and cleanups as always. Details
are listed below:
- Add Yue Hu and Jeffle Xu as reviewers
- Add the missing wake_up when updating lzma streams
- Avoid consecutive detection for Highmem memory
- Prepare for multi-reference pclusters and get rid of PG_error
- Fix ctx->pos update for NFS export
- minor cleanups"
* tag 'erofs-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (23 commits)
erofs: update ctx->pos for every emitted dirent
erofs: get rid of the leftover PAGE_SIZE in dir.c
erofs: get rid of erofs_prepare_dio() helper
erofs: introduce multi-reference pclusters (fully-referenced)
erofs: record the longest decompressed size in this round
erofs: introduce z_erofs_do_decompressed_bvec()
erofs: try to leave (de)compressed_pages on stack if possible
erofs: introduce struct z_erofs_decompress_backend
erofs: get rid of `z_pagemap_global'
erofs: clean up `enum z_erofs_collectmode'
erofs: get rid of `enum z_erofs_page_type'
erofs: rework online page handling
erofs: switch compressed_pages[] to bufvec
erofs: introduce `z_erofs_parse_in_bvecs'
erofs: drop the old pagevec approach
erofs: introduce bufvec to store decompressed buffers
erofs: introduce `z_erofs_parse_out_bvecs()'
erofs: clean up z_erofs_collector_begin()
erofs: get rid of unneeded `inode', `map' and `sb'
erofs: avoid consecutive detection for Highmem memory
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- support for FAN_MARK_IGNORE which untangles some of the not well
defined corner cases with fanotify ignore masks
- small cleanups
* tag 'fsnotify_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Fix comment typo
fanotify: introduce FAN_MARK_IGNORE
fanotify: cleanups for fanotify_mark() input validations
fanotify: prepare for setting event flags in ignore mask
fs: inotify: Fix typo in inotify comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 and reiserfs updates from Jan Kara:
"A fix for ext2 handling of a corrupted fs image and cleanups in ext2
and reiserfs"
* tag 'fs_for_v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add more validity checks for inode counts
fs/reiserfs/inode: remove dead code in _get_block_create_0()
fs/ext2: replace ternary operator with min_t()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Delay the cleanup of interrupted posix lock requests until the user
space result arrives. Previously, the immediate cleanup would lead to
extraneous warnings when the result arrived.
- Tracepoint improvements, e.g. adding the lock resource name.
- Delay the completion of lockspace creation until one full recovery
cycle has completed. This allows more error cases to be returned to
the caller.
- Remove warnings from the locking layer about delayed network replies.
The recently added midcomms warnings are much more useful.
- Begin the process of deprecating two unused lock-timeout-related
features. These features now require enabling via a Kconfig option,
and enabling them triggers deprecation warnings. We expect to remove
the code in v6.2.
* tag 'dlm-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: move kref_put assert for lkb structs
fs: dlm: don't use deprecated timeout features by default
fs: dlm: add deprecation Kconfig and warnings for timeouts
fs: dlm: remove timeout from dlm_user_adopt_orphan
fs: dlm: remove waiter warnings
fs: dlm: fix grammar in lowcomms output
fs: dlm: add comment about lkb IFL flags
fs: dlm: handle recovery result outside of ls_recover
fs: dlm: make new_lockspace() wait until recovery completes
fs: dlm: call dlm_lsop_recover_prep once
fs: dlm: update comments about recovery and membership handling
fs: dlm: add resource name to tracepoints
fs: dlm: remove additional dereference of lksb
fs: dlm: change ast and bast trace order
fs: dlm: change posix lock sigint handling
fs: dlm: use dlm_plock_info for do_unlock_close
fs: dlm: change plock interrupted message to debug again
fs: dlm: add pid to debug log
fs: dlm: plock use list_first_entry
|
|
The unhold_lkb() function decrements the lock's kref, and
asserts that the ref count was not the final one. Use the
kref_put release function (which should not be called) to
call the assert, rather than doing the assert based on the
kref_put return value. Using kill_lkb() as the release
function doesn't make sense if we only want to assert.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
|
|
This patch will disable use of deprecated timeout features if
CONFIG_DLM_DEPRECATED_API is not set. The deprecated features
will be removed in upcoming kernel release v6.2.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
|
|
This patch adds a CONFIG_DLM_DEPRECATED_API Kconfig option
that must be enabled to use two timeout-related features
that we intend to remove in kernel v6.2. Warnings are
printed if either is enabled and used. Neither has ever
been used as far as we know.
. The DLM_LSFL_TIMEWARN lockspace creation flag will be
removed, along with the associated configfs entry for
setting the timeout. Setting the flag and configfs file
would cause dlm to track how long locks were waiting
for reply messages. After a timeout, a kernel message
would be logged, and a netlink message would be sent
to userspace. Recently, midcomms messages have been
added that produce much better logging about actual
problems with messages. No use has ever been found
for the netlink messages.
. The userspace libdlm API has allowed the DLM_LKF_TIMEOUT
flag with a timeout value to be set in lock requests.
The lock request would be cancelled after the timeout.
Signed-off-by: Alexander Aring <[email protected]>
Signed-off-by: David Teigland <[email protected]>
|
|
rseq_abi()->flags and rseq_abi()->rseq_cs->flags 29 upper bits are
currently unused.
The current behavior when those bits are set is to ignore them. This is
not an ideal behavior, because when future features will start using
those flags, if user-space fails to correctly validate that the kernel
indeed supports those flags (e.g. with a new sys_rseq flags bit) before
using them, it may incorrectly assume that the kernel will handle those
flags way when in fact those will be silently ignored on older kernels.
Validating that unused flags bits are cleared will allow a smoother
transition when those flags will start to be used by allowing
applications to fail early, and obviously, when they attempt to use the
new flags on an older kernel that does not support them.
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The pretty much unused RSEQ_CS_FLAG_NO_RESTART_ON_* flags introduce
complexity in rseq, and are subtly buggy [1]. Solving those issues
requires introducing additional complexity in the rseq implementation
for each supported architecture.
Considering that it complexifies the rseq ABI, I am proposing that we
deprecate those flags. [2]
So far there appears to be consensus from maintainers of user-space
projects impacted by this feature that its removal would be a welcome
simplification. [3]
The deprecation approach proposed here is to issue WARN_ON_ONCE() when
encountering those flags and kill the offending process with sigsegv.
This should allow us to quickly identify whether anyone yells at us for
removing this.
Link: https://lore.kernel.org/lkml/[email protected]/ [1]
Link: https://lore.kernel.org/lkml/[email protected]/ [2]
Link: https://lore.kernel.org/lkml/[email protected]/ [3]
Signed-off-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One-liner fix of a NULL pointer deref in the Allwinner clk driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: Fix H6 RTC clock definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Update the 'mitigations=' kernel param documentation
- Check the IBPB feature flag before enabling IBPB in firmware calls
because cloud vendors' fantasy when it comes to creating guest
configurations is unlimited
- Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV
doesn't need it anymore
- Remove dead CONFIG_* items
* tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed
x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available
Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV"
x86/configs: Update configs in x86_debug.config
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Avoid rwsem lockups in certain situations when handling the handoff
bit
* tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Relax the condition under which the DIMM label in ghes_edac is set in
order to accomodate an HPE BIOS which sets only the device but not
the bank
- Two forgotten fixes to synopsys_edac when handling error interrupts
* tag 'edac_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/ghes: Set the DIMM label unconditionally
EDAC/synopsys: Re-enable the error interrupts on v3 hw
EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw
|
|
erofs_readdir update ctx->pos after filling a batch of dentries
and it may cause dir/files duplication for NFS readdirplus which
depends on ctx->pos to fill dir correctly. So update ctx->pos for
every emitted dirent in erofs_fill_dentries to fix it.
Also fix the update of ctx->pos when the initial file position has
exceeded nameoff.
Fixes: 3e917cc305c6 ("erofs: make filesystem exportable")
Signed-off-by: Hongnan Li <[email protected]>
Signed-off-by: Jeffle Xu <[email protected]>
Reviewed-by: Gao Xiang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Gao Xiang <[email protected]>
|
|
Pull ARM fixes from Russell King:
"Last set of ARM fixes for 5.19:
- fix for MAX_DMA_ADDRESS overflow
- fix for find_*_bit performing an out of bounds memory access"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: findbit: fix overflowing offset
ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow
|
|
first waiter
With commit d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more
consistent"), the writer that sets the handoff bit can be interrupted
out without clearing the bit if the wait queue isn't empty. This disables
reader and writer optimistic lock spinning and stealing.
Now if a non-first writer in the queue is somehow woken up or a new
waiter enters the slowpath, it can't acquire the lock. This is not the
case before commit d257cc8cb8d5 as the writer that set the handoff bit
will clear it when exiting out via the out_nolock path. This is less
efficient as the busy rwsem stays in an unlock state for a longer time.
In some cases, this new behavior may cause lockups as shown in [1] and
[2].
This patch allows a non-first writer to ignore the handoff bit if it
is not originally set or initiated by the first waiter. This patch is
shown to be effective in fixing the lockup problem reported in [1].
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: John Donnelly <[email protected]>
Tested-by: Mel Gorman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Two hotfixes, both cc:stable"
* tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hmm: fault non-owner device private entries
page_alloc: fix invalid watermark check on a negative value
|
|
It was missing an 'r'.
Fixes: 186873c549df ("random: use simpler fast key erasure flow on per-cpu keys")
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for NVMe, yet another quirk addition"
* tag 'block-5.19-2022-07-29' of git://git.kernel.dk/linux-block:
nvme-pci: Crucial P2 has bogus namespace ids
|
|
Pull more drm fixes from Dave Airlie:
"Maxime had the dog^Wmailing list server eat his homework^Wmisc pull
request.
Two more small fixes, one in nouveau svm code and the other in
simpledrm.
nouveau:
- page migration fix
simpledrm:
- fix mode_valid return value"
* tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm:
nouveau/svm: Fix to migrate all requested pages
drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One fix to fix simpledrm mode_valid return value, and one for page
migration in nouveau
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220729094514.sfzhc3gqjgwgal62@penduick
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, three in drivers.
The two biggest fixes are ufs and the remaining driver and core fix
are small and obvious (and the core fix is low risk)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix a race condition related to device management
scsi: core: Fix warning in scsi_alloc_sgtables()
scsi: ufs: host: Hold reference returned by of_parse_phandle()
scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown
|
|
Merge series from [email protected] <[email protected]>:
The GXP supports 3 separate SPI interfaces to accommodate the system
flash, core flash, and other functions. The SPI engine supports variable
clock frequency, selectable 3-byte or 4-byte addressing and a
configurable x1, x2, and x4 command/address/data modes. The memory
buffer for reading and writing ranges between 256 bytes and 8KB. This
driver supports access to the core flash and bios part.
|
|
retbleed
Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt"
with the respective retbleed= settings.
Signed-off-by: Eiichi Tsukata <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a
device private PTE is found, the hmm_range::dev_private_owner page is used
to determine if the device private page should not be faulted in.
However, if the device private page is not owned by the caller,
hmm_range_fault() returns an error instead of calling migrate_to_ram() to
fault in the page.
For example, if a page is migrated to GPU private memory and a RDMA fault
capable NIC tries to read the migrated page, without this patch it will
get an error. With this patch, the page will be migrated back to system
memory and the NIC will be able to read the data.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 08ddddda667b ("mm/hmm: check the device private page owner in hmm_range_fault()")
Signed-off-by: Ralph Campbell <[email protected]>
Reported-by: Felix Kuehling <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Cc: Philip Yang <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
There was a report that a task is waiting at the
throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was
increasing.
This is a bug where zone_watermark_fast returns true even when the free
is very low. The commit f27ce0e14088 ("page_alloc: consider highatomic
reserve in watermark fast") changed the watermark fast to consider
highatomic reserve. But it did not handle a negative value case which
can be happened when reserved_highatomic pageblock is bigger than the
actual free.
If watermark is considered as ok for the negative value, allocating
contexts for order-0 will consume all free pages without direct reclaim,
and finally free page may become depleted except highatomic free.
Then allocating contexts may fall into throttle_direct_reclaim. This
symptom may easily happen in a system where wmark min is low and other
reclaimers like kswapd does not make free pages quickly.
Handle the negative case by using MIN.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: f27ce0e14088 ("page_alloc: consider highatomic reserve in watermark fast")
Signed-off-by: Jaewon Kim <[email protected]>
Reported-by: GyeongHwan Hong <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Yong-Taek Lee <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Merge ACPI backlight driver changes, ACPI changes related to PCI and
ACPI documentation changes for v5.20-rc1:
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep Holla).
* acpi-video:
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: video: Drop X86 dependency from Kconfig
* acpi-pci:
ACPI/PCI: Remove useless NULL pointer checks
* acpi-docs:
Documentation: ACPI: EINJ: Fix obsolete example
Documentation: ACPI: Update links and references to DSD related docs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix addresses for bss symbols, describing variables used in resolving
data access in tools such as 'perf c2c' and 'perf mem'.
- Skip symbols if SHF_ALLOC flag is not set, a technique used for
listing deprecated symbols, its addresses are zeros, so not useful.
- Remove undefined behavior from bpf_perf_object__next() when dealing
with an empty bpf_objects_list list.
- Make a ARM CoreSight disasm script work with both python2 and
python3.
- Sync x86's cpufeatures header with with the kernel sources.
* tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Remove undefined behavior from bpf_perf_object__next()
perf symbol: Skip symbols if SHF_ALLOC flag is not set
perf symbol: Correct address for bss symbols
perf scripts python: Let script to be python2 compliant
tools headers cpufeatures: Sync with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one commit to suppress a spurious warning added during the 5.19
cycle"
* tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Avoid a false warning in unbind_workers()
|
|
Merge ACPI power management changes, ACPI LPSS driver changes, ACPI
table parsing code changes and ACPI resource handling changes for
v5.20-rc1:
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong
Guo).
* acpi-pm:
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: PM: save NVS memory for Lenovo G40-45
* acpi-soc:
ACPI: LPSS: Fix missing check in register_device_clock()
* acpi-tables:
ACPI: VIOT: Fix ACS setup
* acpi-resource:
ACPI: resource: skip IRQ override on AMD Zen platforms
|
|
Merge ACPI processor driver changes, APEI changes and ACPI EC driver
changes for v5.20-rc1:
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Clean up the ACPI EC driver after previous changes in it (Hans
de Goede).
* acpi-processor:
ACPI: processor: Drop leftover acpi_processor_get_limit_info() declaration
ACPI: processor: Split out thermal initialization from ACPI PSS
ACPI: processor/idle: Annotate more functions to live in cpuidle section
* acpi-apei:
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: APEI: Better fix to avoid spamming the console with old error logs
ACPI: APEI: Fix double word in a comment
* acpi-ec:
ACPI: EC: Drop unused ident initializers from dmi_system_id tables
ACPI: EC: Re-use boot_ec when possible even when EC_FLAGS_TRUST_DSDT_GPE is set
ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk
ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
|
|
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make some false positive RCU splats resulting from a recent intel_idle
driver change go away (Waiman Long)"
* tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Fix false positive RCU splats due to incorrect hardirqs state
|
|
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible
fails and trigger the false warning.
Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs.
It is very easy to trigger the warning:
Set wq_unbound_cpumask to a small set of CPUs.
Offline all the CPUs of wq_unbound_cpumask.
Offline an extra CPU and trigger the warning.
Fixes: 10a5a651e3af ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Signed-off-by: Lai Jiangshan <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
"A build fix for 'make vdso_install' that avoids an issue trying to
install the compat VDSO"
* tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: compat: vdso: Fix vdso_install target
|
|
Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
* pm-devfreq:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
* pm-qos:
PM: QoS: Add check to make sure CPU freq is non-negative
* pm-tools:
pm-graph v5.9
* pm-docs:
Documentation: PM: Drop pme_interrupt reference
|
|
Merge core device power management changes for v5.20-rc1:
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
* pm-core:
PM: runtime: Extend support for wakeirq for force_suspend|resume
* pm-sleep:
PM: hibernate: defer device probing when resuming from hibernation
PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP
* powercap:
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
powercap: intel_rapl: Add support for RAPTORLAKE_P
* pm-domains:
PM: domains: Ensure genpd_debugfs_dir exists before remove
* pm-em:
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
|
|
Merge processor power management changes for v5.20-rc1:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq policy
which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
* pm-cpufreq:
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
cpufreq: Warn users while freeing active policy
cpufreq: ACPI: Add Zhaoxin/Centaur turbo boost control interface support
cpufreq: Drop unnecessary cpus locking from store()
cpufreq: Optimize cpufreq_show_cpus()
* pm-cpuidle:
intel_idle: make SPR C1 and C1E be independent
cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 5.20-rc1 from Daniel Lezcano:
"- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba)
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn)
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3 (Wolfram
Sang)
- Convert the QCom tsens DT binding to the dtsformat format (Krzysztof
Kozlowski)
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano)
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof)
- Fix array underflow in prep_lookup_table (Dan Carpenter)
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun)
- Fix typos in comments detected on sun8i by Coccinelle (Julia Lawall)
- Fix typos in comments on rzg2l (Biju Das)
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li)
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov)
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer)
- Fix typo in the comments for the 'tmon' tool (Slark Xiao)
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to be
used by the different sensors when registering a thermal zone
(Daniel Lezcano)"
* tag 'thermal-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (36 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix cache size calculation, stack protection attributes, ptrace's
fpr_set and "ROM Size" in boardinfo
- Some cleanups and improvements of assembly
- Some cleanups of unused code and useless code
* tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix wrong "ROM Size" of boardinfo
LoongArch: Fix missing fcsr in ptrace's fpr_set
LoongArch: Fix shared cache size calculation
LoongArch: Disable executable stack by default
LoongArch: Remove unused variables
LoongArch: Remove clock setting during cpu hotplug stage
LoongArch: Remove useless header compiler.h
LoongArch: Remove several syntactic sugar macros for branches
LoongArch: Re-tab the assembly files
LoongArch: Simplify "BGT foo, zero" with BGTZ
LoongArch: Simplify "BLT foo, zero" with BLTZ
LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ
LoongArch: Use the "move" pseudo-instruction where applicable
LoongArch: Use the "jr" pseudo-instruction where applicable
LoongArch: Use ABI names of registers where appropriate
|