| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Even though ARAT interrupts are enabled by default, we still want
to keep the code that enables them. But instead doing that in the
CTB enabling step, move this code to the upload step, where we
already setup few other registers related to GuC.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matthew Brost <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
dma_heap_allocation_data defines the UAPI as follows:
struct dma_heap_allocation_data {
__u64 len;
__u32 fd;
__u32 fd_flags;
__u64 heap_flags;
};
But dma heaps are casting both fd_flags and heap_flags into
unsigned long. This patch makes dma heaps - cma heap and
system heap have consistent types with UAPI.
Signed-off-by: Barry Song <[email protected]>
Acked-by: John Stultz <[email protected]>
Reviewed-by: Carlos Llamas <[email protected]>
Signed-off-by: Sumit Semwal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We should honor requested uncached mode also at the TTM layer.
Otherwise, we risk losing updates to the memory based interrupts
source or status vectors, as those require uncached memory.
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Matt Roper <[email protected]>
Acked-by: Thomas Hellström <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
MediaTek MT8188 has a Mali-G57 MC3 (Valhall-JM): add a new
compatible and platform data using the same supplies and the
same power domain lists as MT8183 (one regulator, three power
domains).
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add a compatible for the MediaTek MT8188 SoC, with an integrated
ARM Mali G57 MC3 (Valhall-JM) GPU.
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
simple_bridge_probe() calls drm_bridge_add()
Thus, drm_bridge_remove() must be called in the remove() callback.
If we call devm_drm_bridge_add() instead, then drm_bridge_remove()
will be called automatically at device release, and the remove()
callback is no longer required.
Signed-off-by: Marc Gonzalez <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Sync to v6.10-rc3.
Signed-off-by: Jani Nikula <[email protected]>
|
|
PORT_ALPM_* registers are using MMIO_TRANS2 macro. This is not correct as
they are port register. Use _PORT_MMIO instead.
Fixes: 4ee30a448255 ("drm/i915/alpm: Add ALPM register definitions")
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit f3c2031db7dfdf470a2d9bf3bd1efa6edfa72d8d.
We want to notice possible issues faced with PSR2 Region Early Transport as
early as possible -> let's revert patch disabling Region Early Transport by
default. Also eDP 1.5 Panel Replay requires Early Transport.
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add new debug bit to be used with i915_edp_psr_debug debugfs
interface. This can be used to disable Panel Replay.
v2: ensure that fastset is performed when the bit changes
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Enabling/disabling Panel Replay on sink side has to be done before link
training. We can't disable it in sink side on PSR disable.
Fixes: 88ae6c65ecdb ("drm/i915/psr: Unify panel replay enable/disable sink")
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently PSR2 SU Region Early Transport is enabled by default on Lunarlake
if panel supports it despite enable_psr module parameter value. This patch
makes it possible for user to limit used PSR mode and prevent SU Region
Early Transport by setting enable_psr as 2. With default (-1) PSR2 SU
Region Early Transport is allowed.
v2: fix/improve commit desciption
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If user is specifically limiting PSR mode to PSR1 or PSR2: disable Panel
Replay. With default value -1 all modes are allowed including Panel
Replay. Disabling PSR using value 0 disables Panel Replay as well.
Also own compute config helper is added for Panel Replay. This makes sense
because number of Panel Replay specific checks are increasing.
v2: Squash adding Panel Replay compute config helper
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Port clock is link rate in 10 kbit/s units. Take this into account when
calculating AUX Less wake time.
Fixes: da6a9836ac09 ("drm/i915/psr: Calculate aux less wake time")
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Animesh Manna <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Wa 16021440873 is writing wrong register. Instead of PIPE_SRCSZ_ERLY_TPT
write CURPOS_ERLY_TPT.
v2: use right offset as well
Fixes: 29cdef8539c3 ("drm/i915/display: Implement Wa_16021440873")
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Currently SU area width is set as MAX_INT. This is causing
problems. Instead set it as pipe src width.
Fixes: 86b26b6aeac7 ("drm/i915/psr: Carry su area in crtc_state")
Signed-off-by: Jouni Högander <[email protected]>
Reviewed-by: Mika Kahola <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Enable Xe2+ overrun mode. For Xe2+, when overrun mode is enabled, there are
no partial reports at the end of buffer, making the OA buffer effectively a
non-power-of-2 size circular buffer whose size, circ_size, is a multiple of
the report size.
v2: Fix implementation of xe_oa_circ_diff/xe_oa_circ_incr (Umesh)
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Rename OA_TAKEN to xe_oa_circ_diff, since xe_oa_circ_diff better describes
what the macro actually does. Also convert to function and add xe_oa_stream
arg. These will be used in the following patch.
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On PVC, a w/a resets RCS/CCS before it goes into RC6. This breaks OA since
OA does not expect engine resets during its use. Fix it by disabling RC6.
v2: Convert to gt oriented error/warn messages (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add MMIO trigger support and allow-list required registers for MMIO trigger
use case. Registers are whitelisted for the lifetime of the driver but MMIO
trigger is enabled only for the duration of the stream.
Bspec: 45925, 60340, 61228
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Allow the OA buffer to be mmap'd to userspace. This is needed for the MMIO
trigger use case. Even otherwise, with whitelisted OA head/tail ptr
registers, userspace can receive/interpret OA data from the mmap'd buffer
without issuing read()'s on the OA stream fd.
v2: Remove unmap_mapping_range from xe_oa_release (Thomas H)
Use vm_flags_mod (Umesh)
Acked-by: Rodrigo Vivi <[email protected]>
Suggested-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement query for properties of OA units present on a device.
v2: Clean up reserved/pad fields (Umesh)
Follow the same scheme as other query structs
v3: Skip reporting reserved engines attached to OA units
v4: Expose oa_buf_size via DRM_XE_PERF_IOCTL_INFO (Umesh)
v5: Don't expose capabilities as OR of properties (Umesh)
v6: Add extensions to query output structs: drm_xe_oa_unit,
drm_xe_query_oa_units and drm_xe_oa_stream_info
v7: Change oa_units[] array to __u64 type
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Similar to OAR, allow userspace to execute MI_REPORT_PERF_COUNT on compute
engines of a specified exec queue.
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add OAR support to allow userspace to execute MI_REPORT_PERF_COUNT on
render engines. Configuration batches are used to program the OAR unit, as
well as modifying the render engine context image of a specified exec queue
(to have correct register values when that context switches in).
v2: Rename/refactor xe_oa_modify_self (Umesh)
v3: Move IS_MI_LRI_CMD() into xe_oa.c (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement the OA stream read file_operation. Both blocking and non-blocking
reads are supported. As part of read system call, the read copies OA perf
data from the OA buffer to the user buffer, after appending packet headers
for status and data packets.
v2: Drop OA report headers, implement DRM_XE_PERF_IOCTL_STATUS (Umesh)
v3: Introduce 'struct drm_xe_oa_stream_status'
v4: Define oa_status register bitfields (Umesh)
v5: Add extensions to 'struct drm_xe_oa_stream_status'
v6: Minor cleanup, eliminate report32 variable
v7: Use -EIO to signal to userspace to read OASTATUS using
DRM_XE_PERF_IOCTL_STATUS, change previous sites returning -EIO to
return -EINVAL
Make drm_xe_oa_stream_status bits contiguous (Jose, Umesh)
rmw oa_status bits (Umesh)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The OA stream open perf op returns an fd with its own file_operations for
the newly initialized OA stream. These file_operations allow userspace to
enable or disable the stream, as well as apply a different metric
configuration for the OA stream. Userspace can also poll for data
availability. OA stream initialization is completed in this commit by
enabling the OA stream. When sampling is enabled this starts a hrtimer
which periodically checks for data availablility.
v2: Use stream properties for stream reconfiguration with
DRM_XE_PERF_IOCTL_CONFIG
v3: Hold runtime_pm reference across oa buffer alloc/free
v4: Fix 32 bit build
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Implement majority of OA stream initialization (as part of OA stream open)
ioctl). OAG buffer is allocated for receiving perf counter samples from
HW. OAG unit is initialized and the selected OA metric configuration is
programmed into OAG unit HW using a command/batch buffer.
Acked-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Properties for OA streams are specified by user space, when the stream is
opened, as a chain of drm_xe_ext_set_property struct's. Parse and validate
these stream properties.
v2: Remove struct drm_xe_oa_open_param (Harish Chegondi)
Drop DRM_XE_OA_PROPERTY_POLL_OA_PERIOD_US (Umesh)
Eliminate comparison with xe_oa_max_sample_rate (Umesh)
Drop 'struct drm_xe_oa_record_header' (Umesh)
v3: s/DRM_XE_OA_PROPERTY_OA_EXPONENT/ \
DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT/ (Jose)
v4: Fix 32 bit build
v5: Add non-static function kernel doc (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Introduce add/remove config perf ops for OA. OA configurations consist of a
set of event/counter select register address/value pairs. The add_config
perf op validates and stores such configurations and also exposes them in
the metrics sysfs. These configurations will be programmed to OA unit HW
when an OA stream using a configuration is opened. The OA stream can also
switch to other stored configurations.
v2: Start config id's from 1 and other minor review comments (Umesh)
v3: Add 32 bit build
v4: Add kernel doc for non-static functions (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Initialize OA unit data struct's for each gt during device probe. Also
assign OA units for hardware engines.
v2: Remove XE_OA_UNIT_OAG/XE_OA_UNIT_OAM_SAMEDIA_0 enum (Umesh)
Change mtl_oa_base to 0x13000 (Umesh)
v3: Switch to drmm_ functions and other cleanups (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add and initialize supported OA data formats for various platforms
(including Xe2). User can request OA data in any supported format.
Bspec: 52198, 60942, 61101
v2: Start 'xe_oa_format_name' enum from 0 (Umesh)
Fix error rewind with OA (Umesh)
v3: Use graphics versions rather than absolute platform names
v4: Add missing kernel doc for struct memebers and enum and other minor
changes (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Normally only superuser/root can access perf counter data. However,
superuser can set perf_stream_paranoid sysctl to 0 to allow non-privileged
users to also access perf data. perf_stream_paranoid is introduced at the
perf layer to allow different perf stream types to share this access
mechanism.
v2: Add kernel doc for non-static functions (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In Xe, the plan is to support multiple types of perf counter streams (OA is
only one type of these streams). Rather than introduce NxM ioctls for
these (N perf streams with M ioctl's per perf stream), we decide to
multiplex these (N different stream types and the M ops for each of these
stream types) through a single PERF ioctl. This multiplexing is the purpose
of the PERF layer.
In addition to PERF DRM ioctl's, another set of ioctl's on the PERF fd are
defined. These are expected to be common to different PERF stream types and
therefore defined at the PERF layer itself.
v2: Add param_size to 'struct drm_xe_perf_param' (Umesh)
v3: Rename 'enum drm_xe_perf_ops' to
'enum drm_xe_perf_ioctls' (Guy Zadicario)
Add DRM_ prefix to ioctl names to indicate uapi names
v4: Add 'enum drm_xe_perf_op' previously missed out (Guy Zadicario)
v5: Squash the ops and PERF layer patches into a single patch (Umesh)
Remove param_size from struct 'drm_xe_perf_param' (Umesh)
v6: Add DRM_XE_PERF_IOCTL_STATUS
v7: Add DRM_XE_PERF_IOCTL_INFO
v8: Fix Copyright years, fix DRM_XE_PERF_TYPE_MAX, move '#include
"xe_perf.h"' to xe_perf.c, add kernel doc (Michal)
Acked-by: Rodrigo Vivi <[email protected]>
Acked-by: Guy Zadicario <[email protected]>
Acked-by: José Roberto de Souza <[email protected]>
Reviewed-by: Umesh Nerlige Ramappa <[email protected]>
Signed-off-by: Ashutosh Dixit <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A temporary fixup was made in commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup
Wa_14020756599") due to limitations in the RTP infra. Now that RTP has
support for OR condition that change can be removed. RTP now also
supports checking any GT, so use that instead of the more specific
xe_rtp_match_when_media2000() used in that commit.
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
One surprising factor of GRAPHICS_VERSION()/MEDIA_VERSION() matching for
people adding new WAs is that it implicitly checks that the
graphics/media IP under check is of that specific type and not that the
device contains a media/graphics IP of that version. Add a new
*_ANY_GT() variant that can be used in that case.
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some workarounds started to depend on different set of conditions where
the action should be applied if any of them match. See e.g.
commit 24d0d98af1c3 ("drm/xe/xe2lpm: Fixup Wa_14020756599"). Add
XE_RTP_MATCH_OR that allows to implement a logical OR for the rules.
Normal precedence applies:
r1, r2, OR, r3
means
(r1 AND r2) OR r3
The check is shortcut as soon as a set of conditions match.
v2: Do not match on empty number of rules-other-than-OR evaluated
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Having at most 4 rules per entry is already reaching the maximum.
Expand it to 6 to allow for more room. With the addition of OR
condition for rules, this will very soon not be sufficient.
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If none of the rules match, there should be 0 entries in the sr xarray,
so none of them should have a register matching.
Reviewed-by: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The race condition between fbcon and drm_panic can only occurs if
VT_CONSOLE is set. So update drm_panic dependency accordingly.
This will make it easier for Linux distributions to enable drm_panic
by disabling VT_CONSOLE, and keeping fbcon terminal.
The only drawback is that fbcon won't display the boot kmsg, so it
should rely on userspace to do that.
At least plymouth already handle this case with
https://gitlab.freedesktop.org/plymouth/plymouth/-/merge_requests/224
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
On platforms where VFs are using memory based interrupts, we
missed invalid access to no longer existing interrupt registers,
as we keep them marked with XE_REG_OPTION_VF. To fix that just
either setup memirq vectors in GuC or enable legacy interrupts.
Fixes: aef4eb7c7dec ("drm/xe/vf: Setup memory based interrupts in GuC")
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Matt Roper <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add this as a value for enum_drm_connector_tv_mode, represented
by the string "Mono", to generate video with no colour encoding
or bursts. Define it to have no pedestal (since only NTSC-M calls
for a pedestal).
Change default mode creation to acommodate the new tv_mode value
which comprises both 525-line and 625-line formats.
Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Nick Hollinghurst <[email protected]>
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It seems that more and more parts of the driver code rely on
having only a const pointer to the xe_device. Allow to check
SR-IOV mode in that code as well.
Signed-off-by: Michal Wajdeczko <[email protected]>
Reviewed-by: Piotr Piórkowski <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for the drm_panic infrastructure, which allows to display
a user friendly message on the screen when a Linux kernel panic occurs.
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Jocelyn Falempe <[email protected]>
Reviewed-by: Aradhya Bhatia <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The properties of this struct are used in long running context so
make that clear by renaming it to lr, in alignment with the rest
of the code.
Cc: Matthew Brost <[email protected]>
Signed-off-by: Francois Dugast <[email protected]>
Reviewed-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Update calculation to avoid overflow.
-v2:
Remove extra line between cc and signed-off.
Fixes: 1676ecd303ac ("drm/i915: Compute CMRR and calculate vtotal")
Cc: Mitul Golani <[email protected]>
Cc: Ankit Nautiyal <[email protected]>
Cc: Suraj Kandpal <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Mitul Golani <[email protected]>
Reviewed-by: Ankit Nautiyal <[email protected]>
Acked-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
"struct nouveau_job_ops" is not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
In order to do it, "struct nouveau_job" and "struct nouveau_job_args" also
need to be adjusted to this new const qualifier.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
5570 152 0 5722 165a drivers/gpu/drm/nouveau/nouveau_exec.o
After:
=====
text data bss dec hex filename
5630 112 0 5742 166e drivers/gpu/drm/nouveau/nouveau_exec.o
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/860e9753d7867aa46b003bb3d0497f1b04065b24.1718381285.git.christophe.jaillet@wanadoo.fr
|
|
I'm pretty sure this optimisation is actually not a great idea,
and is racy with other things waiting for fences.
Just nuke it, there should be no need to do fence waits in a
busy CPU loop.
Signed-off-by: Dave Airlie <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add job that runs igt on top of vkms.
Acked-by: Maíra Canal <[email protected]>
Acked-by: Helen Koike <[email protected]>
Signed-off-by: Vignesh Raman <[email protected]>
Acked-by: Jessica Zhang <[email protected]>
Tested-by: Jessica Zhang <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Helen Koike <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the handling of the disabling FBC when VT-d is active wa
as part of the intel_fbc_check_plane(). As the hw is still there,
intel_fbc_sanitize should be able to handle the state properly.
v2: update the patch description (Jani Nikula)
v3: fix the return value in wa handling (Jani Nikula)
Bspec: 21664
Suggested-by: Ville Syrjälä <[email protected]>
Signed-off-by: Vinod Govindapillai <[email protected]>
Reviewed-by: Jouni Högander <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the comment about FSB straps to where the relevant register is
read.
Suggested-by: Ville Syrjälä <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/8a5b6cd3db80259c30263861f1a9ff04fea2e7f0.1718356614.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <[email protected]>
|