aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-04-07arm64: dts: qcom: sdm630: move DSI opp-table out of DSI nodeKrzysztof Kozlowski1-19/+19
The DSI OPP table on SDM630 is used by one DSI0, but on SDM660 is shared by two nodes (DSI0 and DSI1), thus it should be rather in top-level, not in DSI0. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable ATH10K WiFiKonrad Dybcio1-0/+9
Enable the onboard QCA Wi-Fi. HW identifiers for reference: qmi chip_id 0x320 chip_family 0x4001 board_id 0xff soc_id 0x400e0000 Firmware sources: /vendor/firmware_mnt/image/wlanmdsp.bin -> qcom/.../wlanmdsp.mbn /vendor/firmware_mnt/image/bdwlan.bXX [1] -> [2] -> ath10k/.../board-2.bin [3] -> ath10k/.../firmware-5.bin Not sure where 3 comes from on the device itself, gotta investigate that.. According to [4], it's called WCN3990_STRAIT. [1] XX = board_id printed when the file is missing or by your downstream kernel firmware loader in the dmesg; if XX=ff, use bdwlan.bin [2] https://github.com/jhugo/linux/blob/5.5rc2_wifi/README [3] https://github.com/kvalo/ath10k-firmware/blob/master/WCN3990/hw1.0/HL3.1/WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1/firmware-5.bin [4] https://git.codelinaro.org/clo/la/platform/vendor/qcom-opensource/wlan/qca-wifi-host-cmn/-/blob/LA.VENDOR.1.0.r1-20700-WAIPIO.QSSI13.0/hif/src/hif_hw_version.h#L55 Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6115p-j606f: Enable remoteprocsKonrad Dybcio1-0/+15
Enable the [AC]DSP and MPSS and specify the firmware paths. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6115: Add RMTFSKonrad Dybcio1-0/+10
Add a node for RMTFS and associate it with MSA and NAV IDs to enable modem functionality on SM6115. Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6115-j606f: Add ramoops nodeKonrad Dybcio1-0/+11
Add a ramoops node to enable retrieving crash logs. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin configKrzysztof Kozlowski1-0/+3
Bindings require pin configuration nodes to have the function, even if it is GPIO: msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed: 'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8550: Add the Inline Crypto Engine nodeAbel Vesa1-0/+9
Add support for UFS ICE by adding the qcom,ice property and the ICE dedicated devicetree node. Signed-off-by: Abel Vesa <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: MSM8953: Add lpass nodesAdam Skladowski1-0/+141
Add nodes for remoteproc, smp2p and smsm in preparation for audio support on this platform. Signed-off-by: Adam Skladowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: MSM8953: Add mpss nodesAdam Skladowski1-0/+87
Add nodes for remoteproc, smp2p and smsm to make it possible to use modem functionality on this platform. Signed-off-by: Adam Skladowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: MSM8953: Add wcnss nodesAdam Skladowski1-0/+130
Add nodes for remoteproc, smp2p and smsm to make it possible to use wifi/bt functionality on this platform. Signed-off-by: Adam Skladowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8350: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8150: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: apq8016: remove superfluous "input-enable"Krzysztof Kozlowski1-2/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Cc: Douglas Anderson <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sc8280xp-lenovo-thinkpad: correct pin drive-strengthKrzysztof Kozlowski1-2/+2
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sc8280xp-crd: correct pin drive-strengthKrzysztof Kozlowski1-2/+2
Fix typo in drive-strength property name. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8450: remove superfluous "input-enable"Krzysztof Kozlowski2-3/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8250: remove superfluous "input-enable"Krzysztof Kozlowski2-8/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6350: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6125: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845: remove superfluous "input-enable"Krzysztof Kozlowski6-18/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sc8280xp: remove superfluous "input-enable"Krzysztof Kozlowski1-4/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: qcs404: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8998: remove superfluous "input-enable"Krzysztof Kozlowski4-7/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8996: remove superfluous "input-enable"Krzysztof Kozlowski1-1/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8994: remove superfluous "input-enable"Krzysztof Kozlowski2-2/+0
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6125: Initial support for xiaomi-laurel-sproutLux Aliaga2-0/+422
Add support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a summary on what's defined. - dmesg output to bootloader preconfigured display - USB - UFS - SD card - SMD RPM regulators - Volume Up, Down and Power buttons - Thermistors Signed-off-by: Lux Aliaga <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Marijn Suijten <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6125: Add UFS nodesLux Aliaga1-0/+64
Adds a UFS host controller node and its corresponding PHY to the sm6125 platform. Signed-off-by: Lux Aliaga <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-csot: Add Xiaomi Mi Pad 5 Pro CSOT variantJianhua Lu2-0/+19
Add support for the Xiaomi Mi Pad 5 Pro CSOT variant. The CSOT variant uses China Star Optoelectronics Technology (CSOT) panel based on NT36523 display controller. Signed-off-by: Jianhua Lu <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8250-xiaomi-elish-boe: Add mdss and dsi panelJianhua Lu2-0/+80
Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel is a dual dsi mode panel and the dsi phy type is cphy. Signed-off-by: Jianhua Lu <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: Split elish dts into common dtsi and elish-boe dtsJianhua Lu3-5/+14
There are two panel variants of xiaomi-elish, BOE and CSOT panels. In order to support both panels, so split elish dts into common dtsi and elish-boe dts. Signed-off-by: Jianhua Lu <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm8150: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
SC8150 mailbox is compatible with SDM845. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sc7180: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
SC7180 mailbox is compatible with SDM845. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: qcs404: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
QCS404 mailbox is compatible with MSM8916. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6125: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
SM6125 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sm6115: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
SM6115 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm630: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
SDM630 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8998: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
MSM8998 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: msm8976: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
MSM8976 mailbox is compatible with MSM8994. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: ipq8074: add compatible fallback to mailboxKrzysztof Kozlowski1-1/+2
IPQ8074 mailbox is compatible with IPQ6018. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: Add initial QTI RB1 device treeKonrad Dybcio2-0/+113
Add an initial device tree for the QTI RB1 development board, based on the QRB2210 (QCM2290 derivative) SoC. This device tree targets the SoM revision 4, a.k.a. the Mass Production SKU. To get a successful boot, run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/qrb2210-rb1.dtb >\ .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd \ --output rb1-boot.img \ --pagesize 4096 \ --base 0x8000 \ --cmdline 'some cmdline' fastboot boot rb1-boot.img There's no dtbo or other craziness to worry about. For the best dev experience, you can erase boot and use fastboot boot everytime, so that the bootloader doesn't mess with you. If you have a SoM revision 3 or older (there should be a sticker on it with text like -r00, where r is the revision), you will need to apply this additional diff: aliases { - serial0 = &uart0; + serial0 = &uart4; /* UART connected to the Micro-USB port via a FTDI chip */ - &uart0 { + &uart4 { That should however only concern preproduction boards. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: Add initial PM2250 device treeKonrad Dybcio1-0/+63
Introduce an initial device tree for the PM2250 (sometimes known as PM4125) PMIC. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: Add initial QCM2290 device treeKonrad Dybcio1-0/+1561
Add an initial device tree for the QCM2290 low-end SoC, featuring 4 "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X). This revision brings support for: - TSENS & thermal zones - SDHCI1/2 - I2C, SPI, UART - MPSS - ADSP - Wi-Fi Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845-polaris: Drop inexistent propertiesKonrad Dybcio1-2/+0
Drop the qcom,snoc-host-cap-skip-quirk that was never introduced to solve schema warnings. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845-shift-axolotl: enable SLPIDylan Van Assche1-0/+5
Enable the SLPI DSP on the SHIFTPHONES SHIFT6mq phone with a Qualcomm SDM845 SoC. Signed-off-by: Dylan Van Assche <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845-oneplus: enable SLPIDylan Van Assche1-0/+5
Enable the SLPI DSP on the Oneplus 6 phone with a Qualcomm SDM845 SoC. Signed-off-by: Dylan Van Assche <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845: add SLPI FastRPC supportDylan Van Assche1-0/+26
Qualcomm SDM845 SoC features a SLPI DSP which uses FastRPC through an allocated memory region to load files from the host filesystem such as sensor configuration files. Add a FastRPC node at /dev/fastrpc-sdsp and a DMA region, similar to downstream, to allow userspace to communicate with the SLPI via the FastRPC interface for initializing the sensors on the SLPI. Signed-off-by: Dylan Van Assche <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07dt-bindings: firmware: qcom: scm: add SSC_Q6 and ADSP_Q6 VMIDsDylan Van Assche1-0/+2
SSC_Q6 and ADSP_Q6 are used in the FastRPC driver for accessing the secure world. Signed-off-by: Dylan Van Assche <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845: add SLPI remoteprocDylan Van Assche1-0/+36
Add the SLPI remoteproc to the SDM845 Qualcomm SoC which is responsible for exposing the sensors connected to the SoC. The SLPI communicates over GLink edge 'dsps' and is similar to other DSPs e.g. ADSP or CDSP. This patch allows the SLPI to boot and expose itself over QRTR as service 400. Signed-off-by: Dylan Van Assche <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sa8775p-ride: add PMIC regulatorsBartosz Golaszewski1-0/+233
Add PMIC regulators for sa8775p-ride. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-04-07arm64: dts: qcom: sdm845-oneplus: Fix speaker GPIO nodeKonrad Dybcio1-7/+5
Drop the unnecessary mux{} level to make dtbs check happy. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.