aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-21drm/amdgpu: don't register a dirty callback for non-atomicAlex Deucher1-1/+10
Some asics still support non-atomic code paths. Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper") Reported-by: Arthur Marsh <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0Evan Quan2-93/+5
The pptable in the vbios is fully ready. The related workarounds in driver are not needed any more. Signed-off-by: Evan Quan <[email protected]> Acked-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/pm: add support for 3794 pptable for SMU13.0.0Evan Quan1-0/+1
Enable 3794 pptable support for SMU13.0.0. Signed-off-by: Evan Quan <[email protected]> Acked-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: correct num_dsc based on HW capCharlene Liu1-1/+1
[why] num_dsc is 3 for dcn314 based on HW capablity. Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314Nicholas Kazlauskas1-2/+1
[Why] This shouldn't trigger during tiled display hotplug/unplug but it does because one of the tiles can end up with a NULL plane state. This also doesn't guard against the hang that it was originally trying to resolve, and can instead cause DIO corruption due to OTG sync being lost. [How] This was reverted at one point out of DCN31 so revert it here too. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINEDaniel Miess2-223/+6
[Why] DP DSC compliance failing for dcn314 due to ICH_RESET_AT_END_OF_LINE shift and mask being missing [How] Add in shift and mask for ICH_RESET_AT_END_OF_LINE Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: increase dcn315 pstate change latencyDmytro Laktyushkin1-8/+14
[Why & How] Update after new measurment came in Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix DP MST timeslot issue when fallback happenedCruise Hung1-1/+7
[Why] When USB4 DP link training failed and fell back to lower link rate, the time slot calculation uses the verified_link_cap. And the verified_link_cap was not updated to the new one. It caused the wrong VC payload time-slot was allocated. [How] Updated verified_link_cap with the new one from cur_link_settings after the LT completes successfully. Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Cruise Hung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Display distortion after hotplug 5K tiled displayMeenakshikumar Somasundaram6-20/+45
[Why] During hot plug of specific 5K tiled display, sometimes both the tiles are not synchronized resulting in distortion. The reason is that otgs of both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa) is applied for bandwidth optimization. The otg workaround reenables otg but otg synchronization context is not reset and hence dc_trigger_sync() does not resynchronize otg again. [How] Implement reset_sync_context_for_pipe() to reset the otg synchronization context for the disabled pipe and its slave pipes when otg workaround is applied. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Meenakshikumar Somasundaram <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Update dummy P-state search to use DCN32 DMLGeorge Shen2-1/+51
[Why] Current DCN3.2 logic for finding the dummy P-state index uses the DCN3.0 DML validation function instead of DCN3.2 DML. This can result in either unexpected DML VBA values, or unexpected dummy P-state index to be used. [How] Update the dummy P-state logic to use DCN3.2 DML validation function. Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Nevenko Stupar <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: skip audio setup when audio stream is enabledzhikzhai1-2/+4
[why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Charlene Liu <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: zhikzhai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: update gamut remap if plane has changedHugo Hu1-0/+1
[Why] The desktop plane and full-screen game plane may have different gamut remap coefficients, if switching between desktop and full-screen game without updating the gamut remap will cause incorrect color. [How] Update gamut remap if planes change. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Hugo Hu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Assume an LTTPR is always present on fixed_vs linksMichael Strauss1-0/+8
[WHY] LTTPRs can in very rare instsances fail to increment DPCD LTTPR count. This results in aux-i LTTPR requests to be sent to the wrong DPCD address, which causes link training failure. [HOW] Override internal repeater count if fixed_vs flag is set for a given link Reviewed-by: George Shen <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Michael Strauss <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: fix dcn315 memory channel count and width readDmytro Laktyushkin2-3/+7
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by: Jun Lei <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Fix double cursor on non-video RGB MPOLeo Li1-2/+10
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by: Bhawanpreet Lakha <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Leo Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Only consider pixle rate div policy for DCN32+Alvin Lee3-17/+2
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by: Martin Leung <[email protected]> Acked-by: Wayne Lin <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amd/display: Port DCN30 420 logic to DCN32Chris Park3-0/+29
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by: Wayne Lin <[email protected]> Signed-off-by: Chris Park <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21drm/amdgpu: Update PTE flags with TF enabledMukul Joshi2-4/+6
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b72e79d ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Mukul Joshi <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-21s390/vfio-ap: bypass unnecessary processing of AP resourcesTony Krowiak1-0/+30
It is not necessary to go through the process of validation, linking of queues to mdev and vice versa and filtering the APQNs assigned to the matrix mdev to build an AP configuration for a guest if an adapter or domain being assigned is already assigned to the matrix mdev. Likewise, it is not necessary to proceed through the process the unassignment of an adapter, domain or control domain if it is not assigned to the matrix mdev. Since it is not necessary to process assignment of a resource already assigned or process unassignment of a resource that is been assigned, this patch will bypass all assignment/unassignment operations for an adapter, domain or control domain under these circumstances. Not only is assignment of a duplicate adapter or domain unnecessary, it will also cause a hang situation when removing the matrix mdev to which it is assigned. The reason is because the same vfio_ap_queue objects with an APQN containing the APID of the adapter or APQI of the domain being assigned will get added multiple times to the hashtable that holds them. This results in the pprev and next pointers of the hlist_node (mdev_qnode field in the vfio_ap_queue object) pointing to the queue object itself resulting in an interminable loop when the mdev is removed and the queue table is iterated to reset the queues. Cc: [email protected] Fixes: 11cb2419fafe ("s390/vfio-ap: manage link between queue struct and matrix mdev") Reported-by: Matthew Rosato <[email protected]> Signed-off-by: Tony Krowiak <[email protected]> Reviewed-by: Halil Pasic <[email protected]> Signed-off-by: Halil Pasic <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2022-09-21i2c: mux: harden i2c_mux_alloc() against integer overflowsDan Carpenter1-2/+3
A couple years back we went through the kernel an automatically converted size calculations to use struct_size() instead. The struct_size() calculation is protected against integer overflows. However it does not make sense to use the result from struct_size() for additional math operations as that would negate any safeness. Fixes: 1f3b69b6b939 ("i2c: mux: Use struct_size() in devm_kzalloc()") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Peter Rosin <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-21i2c: mlxbf: Fix frequency calculationAsmaa Mnebhi1-40/+23
The i2c-mlxbf.c driver is currently broken because there is a bug in the calculation of the frequency. core_f, core_r and core_od are components read from hardware registers and are used to compute the frequency used to compute different timing parameters. The shifting mechanism used to get core_f, core_r and core_od is wrong. Use FIELD_GET to mask and shift the bitfields properly. Fixes: b5b5b32081cd206b (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC) Reviewed-by: Khalil Blaiech <[email protected]> Signed-off-by: Asmaa Mnebhi <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2022-09-21io_uring/net: zerocopy sendmsgPavel Begunkov4-5/+107
Add a zerocopy version of sendmsg. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/6aabc4bdfc0ec78df6ec9328137e394af9d4e7ef.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: combine fail handlersPavel Begunkov3-17/+17
Merge io_send_zc_fail() into io_sendrecv_fail(), saves a few lines of code and some headache for following patch. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/e0eba1d577413aef5602cd45f588b9230207082d.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: rename io_sendzc()Pavel Begunkov3-9/+9
Simple renaming of io_sendzc*() functions in preparatio to adding a zerocopy sendmsg variant. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/265af46829e6076dd220011b1858dc3151969226.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: support non-zerocopy sendtoPavel Begunkov3-8/+35
We have normal sends, but what is missing is sendto-like requests. Add sendto() capabilities to IORING_OP_SEND by passing in addr just as we do for IORING_OP_SEND_ZC. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/69fbd8b2cb830e57d1bf9ec351e9bf95c5b77e3f.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: refactor io_setup_async_addrPavel Begunkov1-9/+9
Instead of passing the right address into io_setup_async_addr() only specify local on-stack storage and let the function infer where to grab it from. It optimises out one local variable we have to deal with. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/6bfa9ab810d776853eb26ed59301e2536c3a5471.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: don't lose partial send_zc on failPavel Begunkov3-0/+18
Partial zc send may end up in io_req_complete_failed(), which not only would return invalid result but also mask out the notification leading to lifetime issues. Cc: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/5673285b5e83e6ceca323727b4ddaa584b5cc91e.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: don't lose partial send/recv on failPavel Begunkov3-0/+16
Just as with rw, partial send/recv may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/a4ff95897b5419356fca9ea55db91ac15b2975f9.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/rw: don't lose partial IO result on failPavel Begunkov3-0/+15
A partially done read/write may end up in io_req_complete_failed() and loose the result, make sure we return the number of bytes processed. Cc: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/05e0879c226bcd53b441bf92868eadd4bf04e2fc.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring: add custom opcode hooks on failPavel Begunkov2-0/+5
Sometimes we have to do a little bit of a fixup on a request failuer in io_req_complete_failed(). Add a callback in opdef for that. Cc: [email protected] Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/b734cff4e67cb30cca976b9face321023f37549a.1663668091.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/fdinfo: fix sqe dumping for IORING_SETUP_SQE128Jens Axboe1-6/+26
If we have doubly sized SQEs, then we need to shift the sq index by 1 to account for using two entries for a single request. The CQE dumping gets this right, but the SQE one does not. Improve the SQE dumping in general, the information dumped is pretty sparse and doesn't even cover the whole basic part of the SQE. Include information on the extended part of the SQE, if doubly sized SQEs are in use. A typical dump now looks like the following: [...] SQEs: 32 32: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2721, e0:0x0, e1:0xffffb8041000, e2:0x100000000000, e3:0x5500, e4:0x7, e5:0x0, e6:0x0, e7:0x0 33: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2722, e0:0x0, e1:0xffffb8043000, e2:0x100000000000, e3:0x5508, e4:0x7, e5:0x0, e6:0x0, e7:0x0 34: opcode:URING_CMD, fd:0, flags:1, off:3225964160, addr:0x0, rw_flags:0x0, buf_index:0 user_data:2723, e0:0x0, e1:0xffffb8045000, e2:0x100000000000, e3:0x5510, e4:0x7, e5:0x0, e6:0x0, e7:0x0 [...] Fixes: ebdeb7c01d02 ("io_uring: add support for 128-byte SQEs") Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/fdinfo: get rid of unnecessary is_cqe32 variableJens Axboe1-10/+6
We already have the cq_shift, just use that to tell if we have doubly sized CQEs or not. While in there, cleanup the CQE32 vs normal CQE size printing. Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring: remove unused return from io_disarm_nextPavel Begunkov2-11/+4
We removed conditional io_commit_cqring_flush() guarding against spurious eventfd and the io_disarm_next()'s return value is not used anymore, just void it. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/9a441c9a32a58bcc586076fa9a7d0dc33f1fb3cb.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring: add fast path for io_run_local_work()Pavel Begunkov1-0/+3
We'll grab uring_lock and call __io_run_local_work() with several atomics inside even if there are no task works. Skip it if ->work_llist is empty. Signed-off-by: Pavel Begunkov <[email protected]> Reviewed-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/f6a885f372bad2d77d9cd87341b0a86a4000c0ff.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/iopoll: unify tw breaking logicPavel Begunkov1-7/+7
Let's keep checks for whether to break the iopoll loop or not same for normal and defer tw, this includes ->cached_cq_tail checks guarding against polling more than asked for. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/d2fa8a44f8114f55a4807528da438cde93815360.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/iopoll: fix unexpected returnsPavel Begunkov1-4/+1
We may propagate a positive return value of io_run_task_work() out of io_iopoll_check(), which breaks our tests. io_run_task_work() doesn't return anything useful for us, ignore the return value. Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by: Pavel Begunkov <[email protected]> Reviewed-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/c442bb87f79cea10b3f857cbd4b9a4f0a0493fa3.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring: disallow defer-tw run w/ no submittersPavel Begunkov2-13/+3
We try to restrict CQ waiters when IORING_SETUP_DEFER_TASKRUN is set, but if nothing has been submitted yet it'll allow any waiter, which violates the contract. Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by: Pavel Begunkov <[email protected]> Reviewed-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/b4f0d3f14236d7059d08c5abe2661ef0b78b5528.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring: further limit non-owner defer-tw cq waitingPavel Begunkov2-0/+17
In case of DEFER_TASK_WORK we try to restrict waiters to only one task, which is also the only submitter; however, we don't do it reliably, which might be very confusing and backfire in the future. E.g. we currently allow multiple tasks in io_iopoll_check(). Fixes: c0e0d6ba25f1 ("io_uring: add IORING_SETUP_DEFER_TASKRUN") Signed-off-by: Pavel Begunkov <[email protected]> Reviewed-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/94c83c0a7fe468260ee2ec31bdb0095d6e874ba2.1662652536.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21perf tools: Honor namespace when synthesizing build-idsNamhyung Kim1-3/+14
It needs to enter the namespace before reading a file. Fixes: 4183a8d70a288627 ("perf tools: Allow synthesizing the build id for kernel/modules/tasks in PERF_RECORD_MMAP2") Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo1-2/+3
To pick the changes from: 7df548840c496b01 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Pawan Gupta <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf kcore_copy: Do not check /proc/modules is unchangedAdrian Hunter1-5/+2
/proc/kallsyms and /proc/modules are compared before and after the copy in order to ensure no changes during the copy. However /proc/modules also might change due to reference counts changing even though that does not make any difference. Any modules loaded or unloaded should be visible in changes to kallsyms, so it is not necessary to check /proc/modules also anyway. Remove the comparison checking that /proc/modules is unchanged. Fixes: fc1b691d7651d949 ("perf buildid-cache: Add ability to add kcore to the cache") Reported-by: Daniel Dao <[email protected]> Signed-off-by: Adrian Hunter <[email protected]> Tested-by: Daniel Dao <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21libperf evlist: Fix polling of system-wide eventsAdrian Hunter1-2/+3
Originally, (refer commit f90d194a867a5a1d ("perf evlist: Do not poll events that use the system_wide flag") there wasn't much reason to poll system-wide events because: 1. The mmaps get "merged" via set-output anyway (the per-cpu case) 2. perf reads all mmaps when any event is woken 3. system-wide mmaps do not fill up as fast as the mmaps for user selected events But there was 1 reason not to poll which was that it prevented correct termination due to POLLHUP on all user selected events. That issue is now easily resolved by using fdarray_flag__nonfilterable. With the advent of commit ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps"), system-wide mmaps can be used also in the per-thread case where reason 1 does not apply. Fix the omission of system-wide events from polling by using the fdarray_flag__nonfilterable flag. Example: Before: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 155076 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55fb43c29e80]: pollfd[0] <- event_fd=5 thread_data[0x55fb43c29e80]: pollfd[1] <- event_fd=6 thread_data[0x55fb43c29e80]: pollfd[2] <- non_perf_event fd=4 After: $ perf record --no-bpf-event -vvv -e intel_pt// --per-thread uname 2>err.txt Linux $ grep 'sys_perf_event_open.*=\|pollfd' err.txt sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 156316 cpu -1 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid -1 cpu 4 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid -1 cpu 5 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid -1 cpu 6 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid -1 cpu 7 group_fd -1 flags 0x8 = 15 thread_data[0x55cc19e58e80]: pollfd[0] <- event_fd=5 thread_data[0x55cc19e58e80]: pollfd[1] <- event_fd=6 thread_data[0x55cc19e58e80]: pollfd[2] <- event_fd=7 thread_data[0x55cc19e58e80]: pollfd[3] <- event_fd=9 thread_data[0x55cc19e58e80]: pollfd[4] <- event_fd=10 thread_data[0x55cc19e58e80]: pollfd[5] <- event_fd=11 thread_data[0x55cc19e58e80]: pollfd[6] <- event_fd=12 thread_data[0x55cc19e58e80]: pollfd[7] <- event_fd=13 thread_data[0x55cc19e58e80]: pollfd[8] <- event_fd=14 thread_data[0x55cc19e58e80]: pollfd[9] <- event_fd=15 thread_data[0x55cc19e58e80]: pollfd[10] <- non_perf_event fd=4 Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf record: Fix cpu mask bit setting for mixed mmapsAdrian Hunter1-0/+2
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value -1 must be skipped when setting CPU mask bits. Prior to commit cbd7bfc7fd99acdd ("tools/perf: Fix out of bound access to cpu mask array") the invalid setting went unnoticed, but since then it causes perf record to fail with an error. Example: Before: $ perf record -e intel_pt// --per-thread uname Failed to initialize parallel data streaming masks After: $ perf record -e intel_pt// --per-thread uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.068 MB perf.data ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21perf test: Skip wp modify test on old kernelsNamhyung Kim1-2/+8
It uses PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl. The kernel would return ENOTTY if it's not supported. Update the skip reason in that case. Committer notes: On s/390 the args aren't used, so need to be marked __maybe_unused. Reviewed-by: Ravi Bangoria <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-09-21Merge tag 'opp-fixes-6.0' of ↵Rafael J. Wysocki3-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP fixes for 6.0 from Viresh Kumar: "- Fix un-initialized variable usage (Christophe JAILLET). - Add missing DT properties (Rob Herring)." * tag 'opp-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes OPP: Fix an un-initialized variable usage
2022-09-21Merge tag 'for-linus-6.0-rc7' of ↵Linus Torvalds6-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux Pull UML fixes from Richard Weinberger: - Various fixes for build warnings - Fix default kernel command line * tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: arch: um: Mark the stack non-executable to fix a binutils warning um: Prevent KASAN splats in dump_stack() um: fix default console kernel parameter um: Cleanup compiler warning in arch/x86/um/tls_32.c um: Cleanup syscall_handler_t cast in syscalls_32.h
2022-09-21Merge tag 'mips-fixes_6.0_2' of ↵Linus Torvalds2-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix missing export for Lantiq watchdog driver - fix ethernet phy interface setup for Loongson32 * tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson32: Fix PHY-mode being left unspecified MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
2022-09-21io_uring/net: use io_sr_msg for sendzcPavel Begunkov1-13/+5
Reuse struct io_sr_msg for zerocopy sends, which is handy. There is only one zerocopy specific field, namely .notif, and we have enough space for it. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/408c5b1b2d8869e1a12da5f5a78ed72cac112149.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: refactor io_sr_msg typesPavel Begunkov1-7/+7
In preparation for using struct io_sr_msg for zerocopy sends, clean up types. First, flags can be u16 as it's provided by the userspace in u16 ioprio, as well as addr_len. This saves us 4 bytes. Also use unsigned for size and done_io, both are as well limited to u32. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/42c2639d6385b8b2181342d2af3a42d3b1c5bcd2.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-21io_uring/net: add non-bvec sg chunking callbackPavel Begunkov1-6/+11
Add a sg_from_iter() for when we initiate non-bvec zerocopy sends, which helps us to remove some extra steps from io_sg_from_iter(). The only thing the new function has to do before giving control away to __zerocopy_sg_from_iter() is to check if the skb has managed frags and downgrade them if so. Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/cda3dea0d36f7931f63a70f350130f085ac3f3dd.1662639236.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.