aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-05-25Merge tag 'optee-async-notif-fix-for-v6.3' of ↵Arnd Bergmann1-1/+3
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fixes an uninitialized variable in OP-TEE driver * tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: fix uninited async notif value Link: https://lore.kernel.org/r/20230421075443.GA3136581@rayden Signed-off-by: Arnd Bergmann <[email protected]>
2023-05-25udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().Kuniyuki Iwashima2-0/+4
syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-05-25efi: fix missing prototype warningsArnd Bergmann5-6/+12
The cper.c file needs to include an extra header, and efi_zboot_entry needs an extern declaration to avoid these 'make W=1' warnings: drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes] drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes] To make this easier, move the cper specific declarations to include/linux/cper.h. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-05-25efi/libstub: zboot: Avoid eager evaluation of objcopy flagsArd Biesheuvel1-1/+2
The Make variable containing the objcopy flags may be constructed from the output of build tools operating on build artifacts, and these may not exist when doing a make clean. So avoid evaluating them eagerly, to prevent spurious build warnings. Suggested-by: Pedro Falcato <[email protected]> Tested-by: Alan Bartlett <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2023-05-24Merge branch 'net-phy-mscc-support-vsc8501'Jakub Kicinski2-29/+55
David Epping says: ==================== net: phy: mscc: support VSC8501 this updated series of patches adds support for the VSC8501 Ethernet PHY and fixes support for the VSC8502 PHY in cases where no other software (like U-Boot) has initialized the PHY after power up. The first patch simply adds the VSC8502 to the MODULE_DEVICE_TABLE, where I guess it was unintentionally missing. I have no hardware to test my change. The second patch adds the VSC8501 PHY with exactly the same driver implementation as the existing VSC8502. The (new) third patch removes phydev locking from vsc85xx_rgmii_set_skews(), as discussed for v2 of the patch set. The (now) fourth patch fixes the initialization for VSC8501 and VSC8502. I have tested this patch with VSC8501 on hardware in RGMII mode only. https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8501-03_Datasheet_60001741A.PDF https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8502-03_Datasheet_60001742B.pdf Table 4-42 "RGMII CONTROL, ADDRESS 20E2 (0X14)" Bit 11 for each of them. By default the RX_CLK is disabled for these PHYs. In cases where no other software, like U-Boot, enabled the clock, this results in no received packets being handed to the MAC. The patch enables this clock output. According to Microchip support (case number 01268776) this applies to all modes (RGMII, GMII, and MII). Other PHYs sharing the same register map and code, like VSC8530/31/40/41 have the clock enabled and the relevant bit 11 is reserved and read-only for them. As per previous discussion the patch still clears the bit on these PHYs, too, possibly more easily supporting other future PHYs implementing this functionality. For the VSC8572 family of PHYs, having a different register map, no such changes are applied. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net: phy: mscc: enable VSC8501/2 RGMII RX clockDavid Epping2-26/+29
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled. For other PHYs supported by this driver the clock output is enabled by default. Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Signed-off-by: David Epping <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net: phy: mscc: remove unnecessary phydev lockingDavid Epping1-4/+0
Holding the struct phy_device (phydev) lock is unnecessary when accessing phydev->interface in the PHY driver .config_init method, which is the only place that vsc85xx_rgmii_set_skews() is called from. The phy_modify_paged() function implements required MDIO bus level locking, which can not be achieved by a phydev lock. Signed-off-by: David Epping <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net: phy: mscc: add support for VSC8501David Epping2-0/+26
The VSC8501 PHY can use the same driver implementation as the VSC8502. Adding the PHY ID and copying the handler functions of VSC8502 is sufficient to operate it. Signed-off-by: David Epping <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLEDavid Epping1-0/+1
The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping <[email protected]> Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24Merge branch 'bug-fixes-for-net-handshake'Jakub Kicinski8-7/+29
Chuck Lever says: ==================== Bug fixes for net/handshake Paolo observed that there is a possible leak of sock->file. I haven't looked into that yet, but it seems to be separate from the fixes in this series, so no need to hold these up. ==================== The submissions mentions net-next but it means netdev (perhaps merge window left over when trees are converged). In any case, it should have gone into net, but was instead applied to net-next as commit deb2e484baf9 ("Merge branch 'net-handshake-fixes'"). These are fixes tho, and Chuck needs them to make progress with the client so double-merging them into net... it is what it is :( Link: https://lore.kernel.org/r/168381978252.84244.1933636428135211300.stgit@91.116.238.104.host.secureserver.net Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: Enable the SNI extension to work properlyChuck Lever5-0/+19
Enable the upper layer protocol to specify the SNI peername. This avoids the need for tlshd to use a DNS lookup, which can return a hostname that doesn't match the incoming certificate's SubjectName. Fixes: 2fd5532044a8 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: Unpin sock->file if a handshake is cancelledChuck Lever2-0/+5
If user space never calls DONE, sock->file's reference count remains elevated. Enable sock->file to be freed eventually in this case. Reported-by: Jakub Kacinski <[email protected]> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: handshake_genl_notify() shouldn't ignore @flagsChuck Lever1-1/+1
Reported-by: Dan Carpenter <[email protected]> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: Fix uninitialized local variableChuck Lever1-1/+1
trace_handshake_cmd_done_err() simply records the pointer in @req, so initializing it to NULL is sufficient and safe. Reported-by: Dan Carpenter <[email protected]> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: Fix handshake_dup() ref countingChuck Lever1-2/+3
If get_unused_fd_flags() fails, we ended up calling fput(sock->file) twice. Reported-by: Dan Carpenter <[email protected]> Suggested-by: Paolo Abeni <[email protected]> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24net/handshake: Remove unneeded check from handshake_dup()Chuck Lever1-3/+0
handshake_req_submit() now verifies that the socket has a file. Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24Merge tag 'for-netdev' of ↵Jakub Kicinski20-448/+738
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-05-24 We've added 19 non-merge commits during the last 10 day(s) which contain a total of 20 files changed, 738 insertions(+), 448 deletions(-). The main changes are: 1) Batch of BPF sockmap fixes found when running against NGINX TCP tests, from John Fastabend. 2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails, from Anton Protopopov. 3) Init the BPF offload table earlier than just late_initcall, from Jakub Kicinski. 4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields, from Will Deacon. 5) Remove a now unsupported __fallthrough in BPF samples, from Andrii Nakryiko. 6) Fix a typo in pkg-config call for building sign-file, from Jeremy Sowden. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Test progs verifier error with latest clang bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0 bpf, sockmap: Build helper to create connected socket pair bpf, sockmap: Pull socket helpers out of listen test for general use bpf, sockmap: Incorrectly handling copied_seq bpf, sockmap: Wake up polling after data copy bpf, sockmap: TCP data stall on recv before accept bpf, sockmap: Handle fin correctly bpf, sockmap: Improved check for empty queue bpf, sockmap: Reschedule is now done through backlog bpf, sockmap: Convert schedule_work into delayed_work bpf, sockmap: Pass skb ownership through read_skb bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields samples/bpf: Drop unnecessary fallthrough bpf: netdev: init the offload table earlier selftests/bpf: Fix pkg-config call building sign-file ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-05-24Documentation: net/mlx5: Wrap notes in admonition blocksBagas Sanjaya1-5/+9
Wrap note paragraphs in note:: directive as it better fit for the purpose of noting devlink commands. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Fixes: cf14af140a5ad0 ("net/mlx5e: Add vnic devlink health reporter to representors") Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Bagas Sanjaya <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24Documentation: net/mlx5: Add blank line separator before numbered listsBagas Sanjaya1-0/+2
The doc forgets to add separator before numbered lists, which causes the lists to be appended to previous paragraph inline instead. Add the missing separator. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Bagas Sanjaya <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24Documentation: net/mlx5: Use bullet and definition lists for vnic counters ↵Bagas Sanjaya1-16/+20
description "vnic reporter" section contains unformatted description for vnic counters, which is rendered as one long paragraph instead of list. Use bullet and definition lists to match other lists. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Bagas Sanjaya <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Daniel Machon <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocksBagas Sanjaya1-2/+6
Sphinx reports htmldocs warnings: Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:287: WARNING: Unexpected indentation. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:288: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:290: WARNING: Unexpected indentation. Fix above warnings by wrapping diagnostic devlink commands in "vnic reporter" section in code blocks to be consistent with other devlink command snippets. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Fixes: cf14af140a5ad0 ("net/mlx5e: Add vnic devlink health reporter to representors") Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Bagas Sanjaya <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()Dan Carpenter1-1/+1
This function accidentally dereferences "cpus" instead of returning directly. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: b48a0f72bc3e ("net/mlx5: Refactor completion irq request/release code") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: DR, Add missing mutex init/destroy in pattern managerYevgeny Kliteynik1-0/+3
Add missing mutex init/destroy as caught by the lock's debug warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern") Signed-off-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Move Ethernet driver debugfs to profile init callbackJianbo Liu2-5/+11
As priv->dfs_root is cleared, and therefore missed, when change eswitch mode, move the creation of the root debugfs to the init callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and the destruction to the cleanup callback for symmeter. Fixes: 288eca60cc31 ("net/mlx5e: Add Ethernet driver debugfs") Signed-off-by: Jianbo Liu <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Don't attach netdev profile while handling internal errorDmytro Linkin1-4/+31
As part of switchdev mode disablement, driver changes port netdevice profile from uplink to nic. If this process is triggered by health recovery flow (PCI reset, for ex.) profile attach would fail because all fw commands aborted when internal error flag is set. As a result, nic netdevice profile is not attached and driver fails to rollback to uplink profile, which leave driver in broken state and cause crash later. To handle broken state do netdevice profile initialization only instead of full attachment and release mdev resources on driver suspend as expected. Actual netdevice attachment is done during driver load. Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method") Signed-off-by: Dmytro Linkin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: Fix post parse infra to only parse every action onceVlad Buslov3-5/+12
Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of actions starting after previous split and ending at the current action. However, that range is not provided as arguments and mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates over all flow actions. Not only this is redundant, it also causes a bug when mlx5e_tc_act->post_parse() callback is not idempotent since it will be called for every split. For example, ct action tc_act_post_parse_ct() callback obtains a reference to mlx5_ct_ft instance and calling it several times during parsing stage will cause reference counter imbalance. Fix the issue by providing a proper action range of the current split subset to mlx5e_tc_act_post_parse() and only calling mlx5e_tc_act->post_parse() for actions inside the subset range. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Use query_special_contexts cmd only once per mdevDragos Tatulea4-21/+26
Don't query the firmware so many times (num rqs * num wqes * wqe frags) because it slows down linearly the interface creation time when the product is larger. Do it only once per mdev and store the result in mlx5e_param. Due to helper function being called from different files, move it to an appropriate location. Rename the function with a proper prefix and add a small cleanup. This fix applies only for legacy rq. Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys") Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Or Har-Toov <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: fw_tracer, Fix event handlingShay Drory1-1/+1
mlx5 driver needs to parse traces with event_id inside the range of first_string_trace and num_string_trace. However, mlx5 is parsing all events with event_id >= first_string_trace. Fix it by checking for the correct range. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: SF, Drain health before removing deviceShay Drory1-0/+1
There is no point in recovery during device removal. Also, if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ before removing device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5: Drain health before unregistering devlinkShay Drory1-3/+4
mlx5 health mechanism is using devlink APIs, which are using devlink notify APIs. After the cited patch, using devlink notify APIs after devlink is unregistered triggers a WARN_ON(). Hence, drain health WQ before devlink is unregistered. Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Do not update SBCM when prio2buffer command is invalidMaher Sanalla1-2/+2
The shared buffer pools configuration which are stored in the SBCM register are updated when the user changes the prio2buffer mapping. However, in case the user desired prio2buffer change is invalid, which can occur due to mapping a lossless priority to a not large enough buffer, the SBCM update should not be performed, as the user command is failed. Thus, Perform the SBCM update only after xoff threshold calculation is performed and the user prio2buffer mapping is validated. Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Consider internal buffers size in port buffer calculationsMaher Sanalla3-21/+36
Currently, when a user triggers a change in port buffer headroom (buffers 0-7), the driver checks that the requested headroom does not exceed the total port buffer size. However, this check does not take into account the internal buffers (buffers 8-9), which are also part of the total port buffer. This can result in treating invalid port buffer change requests as valid, causing unintended changes to the shared buffer. To address this, include the internal buffers size in the calculation of available port buffer space which ensures that port buffer requests do not exceed the correct limit. Furthermore, remove internal buffers (8-9) size from the total_size calculation as these buffers are reserved for internal use and are not exposed to the user. While at it, add verbosity to the debug prints in mlx5e_port_query_buffer() function to ease future debugging. Fixes: ecdf2dadee8e ("net/mlx5e: Receive buffer support for DCBX") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Prevent encap offload when neigh update is runningChris Mi1-17/+20
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad7999b ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24net/mlx5e: Extract remaining tunnel encap code to dedicated fileChris Mi3-87/+94
Move set_encap_dests() and clean_encap_dests() to the tunnel encap dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set() and mlx5e_tc_tun_encap_dests_unset(). No functional change in this patch. It is needed in the next patch. Signed-off-by: Chris Mi <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-05-24smb3: move Documentation/filesystems/cifs to Documentation/filesystems/smbSteve French5-2/+2
Documentation/filesystems/cifs contains both server and client information so its pathname is misleading. In addition, the directory fs/smb now contains both server and client, so move Documentation/filesystems/cifs to Documentation/filesystems/smb Suggested-by: Namjae Jeon <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-05-24cifs: correct references in Documentation to old fs/cifs pathSteve French6-10/+10
The fs/cifs directory has moved to fs/smb/client, correct mentions of this in Documentation and comments. Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-05-24smb: move client and server files to common directory fs/smbSteve French149-23/+30
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko and helper modules) to new fs/smb subdirectory: fs/cifs --> fs/smb/client fs/ksmbd --> fs/smb/server fs/smbfs_common --> fs/smb/common Suggested-by: Linus Torvalds <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-05-24cifs: mapchars mount option ignoredSteve French1-0/+8
There are two ways that special characters (not allowed in some other operating systems like Windows, but allowed in POSIX) have been mapped in the past ("SFU" and "SFM" mappings) to allow them to be stored in a range reserved for special chars. The default for Linux has been to use "mapposix" (ie the SFM mapping) but the conversion to the new mount API in the 5.11 kernel broke the ability to override the default mapping of the reserved characters (like '?' and '*' and '\') via "mapchars" mount option. This patch fixes that - so can now mount with "mapchars" mount option to override the default ("mapposix" ie SFM) mapping. Reported-by: Tyler Spivey <[email protected]> Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Steve French <[email protected]>
2023-05-24smb3: display debug information better for encryptionSteve French1-2/+6
Fix /proc/fs/cifs/DebugData to use the same case for "encryption" (ie "Encryption" with init capital letter was used in one place). In addition, if gcm256 encryption (intead of gcm128) is used on a connection to a server, note that in the DebugData as well. It now displays (when gcm256 negotiated): Security type: RawNTLMSSP SessionId: 0x86125800bc000b0d encrypted(gcm256) Acked-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-05-24cifs: fix smb1 mount regressionPaulo Alcantara1-1/+1
cifs.ko maps NT_STATUS_NOT_FOUND to -EIO when SMB1 servers couldn't resolve referral paths. Proceed to tree connect when we get -EIO from dfs_get_referral() as well. Reported-by: Kris Karas (Bug Reporting) <[email protected]> Tested-by: Woody Suwalski <[email protected]> Fixes: 8e3554150d6c ("cifs: fix sharing of DFS connections") Cc: [email protected] # v6.2+ Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-05-24drm/amd/display: Have Payload Properly Created After ResumeFangzhi Zuo1-2/+2
At drm suspend sequence, MST dc_sink is removed. When commit cached MST stream back in drm resume sequence, the MST stream payload is not properly created and added into the payload table. After resume, topology change is reprobed by removing existing streams first. That leads to no payload is found in the existing payload table as below error "[drm] ERROR No payload for [MST PORT:] found in mst state" 1. In encoder .atomic_check routine, remove check existance of dc_sink 2. Bypass MST by checking existence of MST root port. dc_link_type cannot differentiate MST port before topology is rediscovered. Reviewed-by: Wayne Lin <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-05-24drm/amd/display: Fix warning in disabling vblank irqAlan Liu2-21/+16
[Why] During gpu-reset, we toggle vblank irq by calling dc_interrupt_set() instead of amdgpu_irq_get/put() because we don't want to change the irq source's refcount. However, we see the warning when vblank irq is enabled by dc_interrupt_set() during gpu-reset but disabled by amdgpu_irq_put() after gpu-reset. [How] Only in dm_gpureset_toggle_interrupts() we toggle vblank interrupts by calling dc_interrupt_set(). Apart from this we call dm_set_vblank() which uses amdgpu_irq_get/put() to operate vblank irq. Reviewed-by: Bhawanpreet Lakha <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alan Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-05-24perf/x86/uncore: Correct the number of CHAs on SPRKan Liang1-0/+11
The number of CHAs from the discovery table on some SPR variants is incorrect, because of a firmware issue. An accurate number can be read from the MSR UNC_CBO_CONFIG. Fixes: 949b11381f81 ("perf/x86/intel/uncore: Add Sapphire Rapids server CHA support") Reported-by: Stephane Eranian <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Stephane Eranian <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2023-05-24drm/amd/pm: Fix output of pp_od_clk_voltageJonatas Esteves1-7/+5
Printing the other clock types should not be conditioned on being able to print OD_SCLK. Some GPUs currently have limited capability of only printing a subset of these. Since this condition was introduced in v5.18-rc1, reading from `pp_od_clk_voltage` has been returning empty on the Asus ROG Strix G15 (2021). Fixes: 79c65f3fcbb1 ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c") Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Jonatas Esteves <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-05-24drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7Evan Quan1-0/+1
Otherwise, the power source switching will fail due to message unavailable. Fixes: bf4823267a81 ("drm/amd/pm: fix possible power mode mismatch between driver and PMFW") Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-05-24drm/radeon: reintroduce radeon_dp_work_func contentAlex Deucher1-0/+10
Put back the radeon_dp_work_func logic. It seems that handling DP RX interrupts is necessary to make some panels work. This was removed with the MST support, but it regresses some systems so add it back. While we are here, add the proper mutex locking. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2567 Fixes: 01ad1d9c2888 ("drm/radeon: Drop legacy MST support") Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: Lyude Paul <[email protected]> Cc: [email protected]
2023-05-24drm/amdgpu: don't enable secure display on incompatible platformsJesse Zhang1-1/+7
[why] [drm] psp gfx command LOAD_TA(0x1) failed and response status is (0x7) [drm] psp gfx command INVOKE_CMD(0x3) failed and response status is (0x4) amdgpu 0000:04:00.0: amdgpu: Secure display: Generic Failure. [how] don't enable secure display on incompatible platforms Suggested-by: Aaron Liu <[email protected]> Signed-off-by: Jesse zhang <[email protected]> Reviewed-by: Aaron Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2023-05-24drm:amd:amdgpu: Fix missing buffer object unlock in failure pathSukrut Bellary2-2/+6
smatch warning - 1) drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:3615 gfx_v9_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. 2) drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:6901 gfx_v10_0_kiq_resume() warn: inconsistent returns 'ring->mqd_obj->tbo.base.resv'. Signed-off-by: Sukrut Bellary <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-05-24Merge tag 'spi-fix-v6.4-rc3' of ↵Linus Torvalds4-65/+51
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A collection of fixes that came in since the merge window, plus an update to MAINTAINERS. The Cadence fixes are coming from the addition of device mode support, they required a couple of incremental updates in order to get something that works robustly for both device and controller modes" * tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spi-cadence: Interleave write of TX and read of RX FIFO spi: dw: Replace spi->chip_select references with function calls spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI spi: spi-cadence: Only overlap FIFO transactions in slave mode spi: spi-cadence: Avoid read of RX FIFO before its ready spi: spi-geni-qcom: Select FIFO mode for chip select
2023-05-24Merge tag 'regulator-fix-v6.4-rc3' of ↵Linus Torvalds3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Some fixes that came in since the merge window, nothing terribly exciting - a couple of driver specific fixes and a fix for the error handling when setting up the debugfs for the devices" * tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: mt6359: add read check for PMIC MT6359 regulator: Fix error checking for debugfs_create_dir regulator: pca9450: Fix BUCK2 enable_mask
Powered by cgit, Gruvboxed by Blaster4385.