aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-04-21sh: Tidy CPU probing and fixup section annotations.Paul Mundt8-22/+9
This does a detect_cpu_and_cache_system() -> cpu_probe() rename, tidies up the unused return value, and stuffs it under __cpuinit in preparation for CPU hotplug. Signed-off-by: Paul Mundt <[email protected]>
2010-04-21sh: hw-breakpoints: Kill off stub unthrottle callback.Paul Mundt2-6/+0
This follows the x86 change and kills off the unthrottle stub. As the x86 change killed off the generic callback it isn't used anymore anyways. Signed-off-by: Paul Mundt <[email protected]>
2010-04-20sh: Zero out aliases counter when using SH-X3 hardware assistance.Paul Mundt1-1/+10
This zeroes out the number of cache aliases in the cache info descriptors when hardware alias avoidance is enabled. This cuts down on the amount of flushing taken care of by common code, and also permits coherency control to be disabled for the single CPU and 4k page size case. Signed-off-by: Paul Mundt <[email protected]>
2010-04-20sh: dwarf unwinder needs linux/module.h.Paul Mundt1-0/+1
Previously the struct module definition was pulled in from other headers, but we want the reference to be explicit. Fixes up randconfig build issues. Signed-off-by: Paul Mundt <[email protected]>
2010-04-19sh: Enable SH-X3 hardware synonym avoidance handling.Paul Mundt3-0/+43
This enables support for the hardware synonym avoidance handling on SH-X3 CPUs for the case where dcache aliases are possible. icache handling is retained, but we flip on broadcasting of the block invalidations due to the lack of coherency otherwise on SMP. Signed-off-by: Paul Mundt <[email protected]>
2010-04-19sh: mach-sdk7786: pm_power_off support.Paul Mundt2-0/+23
This wires up power-off support for the SDK7786 board. Signed-off-by: Paul Mundt <[email protected]>
2010-04-15sh: intc: IRQ auto-distribution support.Paul Mundt6-79/+244
This implements support for hardware-managed IRQ balancing as implemented by SH-X3 cores (presently only hooked up for SH7786, but can probably be carried over to other SH-X3 cores, too). CPUs need to specify their distribution register along with the mask definitions, as these follow the same format. Peripheral IRQs that don't opt out of balancing will be automatically distributed at the whim of the hardware block, while each CPU needs to verify whether it is handling the IRQ or not, especially before clearing the mask. Signed-off-by: Paul Mundt <[email protected]>
2010-04-15sh: Disable IRQ balancing for timer and IPI IRQs.Paul Mundt4-5/+8
Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing. IPIs are disabled as a result of being percpu while the timers simply disable balancing outright. Signed-off-by: Paul Mundt <[email protected]>
2010-04-13sh: intc: userimask support.Paul Mundt5-2/+94
This adds support for hardware-assisted userspace irq masking for special priority levels. Due to the SR.IMASK interactivity, only some platforms implement this in hardware (including but not limited to SH-4A interrupt controllers, and ARM-based SH-Mobile CPUs). Each CPU needs to wire this up on its own, for now only SH7786 is wired up as an example. Signed-off-by: Paul Mundt <[email protected]>
2010-04-13sh: intc: Tidy up loglevel mismatches.Paul Mundt1-4/+7
The printk loglevels are all over the place, make them a bit more coherent, and add some registration notification while we're at it. Signed-off-by: Paul Mundt <[email protected]>
2010-04-13sh: intc: Provide sysdev name for intc controllers.Paul Mundt1-0/+16
Presently the sysdevs are simply numbered based on the list position, without having any direct way of figuring out which controller these are actually mapping to. This provides a name attr for mapping out the chip name. Signed-off-by: Paul Mundt <[email protected]>
2010-04-13sh: dmaengine support for SH7786 DMAC0.Paul Mundt2-2/+83
Hook up DMAC0 on SH7786. Signed-off-by: Paul Mundt <[email protected]>
2010-04-07sh: Disable MMUCR_AT for SH-4 nommu.Paul Mundt1-2/+9
Presently address translation is default-enabled regardless of whether CONFIG_MMU is set or not in the SH-4 case, this fixes it up, and also makes the control init word a bit more readable in the process. Signed-off-by: Paul Mundt <[email protected]>
2010-04-05Merge branch 'sh/stable-updates'Paul Mundt351-3734/+5901
2010-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds7-21/+120
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sunxvr500: Ignore secondary output PCI devices. sparc64: Implement perf_arch_fetch_caller_regs sparc64: Update defconfig. sparc64: Fix array size reported by vmemmap_populate() sparc: Fix regset register window handling. drivers/serial/sunsu.c: Correct use after free
2010-04-04Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds11-75/+153
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Always build the powerpc perf_arch_fetch_caller_regs version perf: Always build the stub perf_arch_fetch_caller_regs version perf, probe-finder: Build fix on Debian perf/scripts: Tuple was set from long in both branches in python_process_event() perf: Fix 'perf sched record' deadlock perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels perf, x86: Fix AMD hotplug & constraint initialization x86: Move notify_cpu_starting() callback to a later stage x86,kgdb: Always initialize the hw breakpoint attribute perf: Use hot regs with software sched switch/migrate events perf: Correctly align perf event tracing buffer
2010-04-04Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlock sched: Fix proc_sched_set_task()
2010-04-04Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ring-buffer: Add missing unlock tracing: Fix lockdep warning in global_clock()
2010-04-04proc: pagemap: Hold mmap_sem during page walkKAMEZAWA Hiroyuki1-49/+38
In initial design, walk_page_range() was designed just for walking page table and it didn't require mmap_sem. Now, find_vma() etc.. are used in walk_page_range() and we need mmap_sem around it. This patch adds mmap_sem around walk_page_range(). Because /proc/<pid>/pagemap's callback routine use put_user(), we have to get rid of it to do sane fix. Changelog: 2010/Apr/2 - fixed start_vaddr and end overflow Changelog: 2010/Apr/1 - fixed start_vaddr calculation - removed unnecessary cast. - removed unnecessary change in smaps. - use GFP_TEMPORARY instead of GFP_KERNEL Signed-off-by: KAMEZAWA Hiroyuki <[email protected]> Cc: Matt Mackall <[email protected]> Cc: KOSAKI Motohiro <[email protected]> Cc: San Mehat <[email protected]> Cc: Brian Swetland <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Andrew Morton <[email protected]> [ Fixed kmalloc failure return code as per Matt ] Signed-off-by: Linus Torvalds <[email protected]>
2010-04-04sunxvr500: Ignore secondary output PCI devices.David S. Miller1-7/+17
These just represent the secondary and further heads attached to the card, and they have different sets of PCI bar registers to map. So don't try to drive them in the main driver. Reported-by: Frans van Berckel <[email protected]> Tested-by: Frans van Berckel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-03sparc64: Implement perf_arch_fetch_caller_regsDavid S. Miller1-0/+75
We provide regs->tstate, regs->tpc, regs->tnpc and regs->u_regs[UREG_FP]. regs->tstate is necessary for: user_mode() (via perf_exclude_event()) perf_misc_flags() (via perf_prepare_sample()) regs->tpc is necessary for: perf_instruction_pointer() (via perf_prepare_sample()) and regs->u_regs[UREG_FP] is necessary for: perf_callchain() (via perf_prepare_sample()) The regs->tnpc value is provided just to be tidy. Signed-off-by: David S. Miller <[email protected]>
2010-04-03sparc64: Update defconfig.David S. Miller1-12/+16
Signed-off-by: David S. Miller <[email protected]>
2010-04-03Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller4501-121780/+251528
2010-04-03sparc64: Fix array size reported by vmemmap_populate()Ben Hutchings1-1/+1
vmemmap_populate() attempts to report the used index and total size of vmemmap_table, but it wrongly shifts the total size so that it is always shown as 0. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-03perf: Always build the powerpc perf_arch_fetch_caller_regs versionFrederic Weisbecker1-2/+0
Now that software events use perf_arch_fetch_caller_regs() too, we need the powerpc version to be always built. Fixes the following build error: (.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs' (.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs' (.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs' arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow make[1]: *** [.tmp_vmlinux1] Error 1 make: *** [sub-make] Error 2 Reported-by: Michael Ellerman <[email protected]> Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Paul Mackerras <[email protected]>
2010-04-03perf: Always build the stub perf_arch_fetch_caller_regs versionFrederic Weisbecker1-2/+1
Now that software events use perf_arch_fetch_caller_regs() too, we need the stub version to be always built in for archs that don't implement it. Fixes the following build error in PARISC: kernel/built-in.o: In function `perf_event_task_sched_out': (.text.perf_event_task_sched_out+0x54): undefined reference to `perf_arch_fetch_caller_regs' Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Paul Mackerras <[email protected]>
2010-04-02Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds13-47/+137
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5965/1: Fix soft lockup in at91 udc driver ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds ARM: 6005/1: arm: kprobes: fix register corruption with jprobes ARM: 6003/1: removing compilation warning from pl061.h ARM: 6001/1: removing compilation warning comming from clkdev.h ARM: 6000/1: removing compilation warning comming from <asm/irq.h> ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h ARM: 5997/1: ARM: Correct the VFPv3 detection ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4) ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4) ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4) ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
2010-04-02Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-2/+61
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them powerpc/fsl: add device tree binding for QE firmware of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
2010-04-02Merge branch 'reiserfs/kill-bkl' of ↵Linus Torvalds1-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: reiserfs: Fix locking BUG during mount failure
2010-04-02PCI quirk: RS780/RS880: disable MSI behind the PCI bridgeClemens Ladisch1-33/+3
The missing initialization of the nb_cntl.strap_msi_enable does not seem to be the only problem that prevents MSI, so that quirk is not sufficient to enable MSI on all machines. To be safe, disable MSI unconditionally for the internal graphics and HDMI audio on these chipsets. [rjw: Added the PCI_VENDOR_ID_AI quirk.] Signed-off-by: Clemens Ladisch <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-02Merge branch 'kgdb-fixes' of ↵Linus Torvalds2-102/+109
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: Turn off tracing while in the debugger kgdb: use atomic_inc and atomic_dec instead of atomic_set kgdb: eliminate kgdb_wait(), all cpus enter the same way kgdbts,sh: Add in breakpoint pc offset for superh kgdb: have ebin2mem call probe_kernel_write once
2010-04-02Merge branch 'pm-fixes' of ↵Linus Torvalds3-8/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Freezer: Fix buggy resume test for tasks frozen with cgroup freezer Freezer: Only show the state of tasks refusing to freeze
2010-04-02tty: release_one_tty() forgets to put pidsOleg Nesterov1-0/+2
release_one_tty(tty) can be called when tty still has a reference to pgrp/session. In this case we leak the pid. Signed-off-by: Oleg Nesterov <[email protected]> Reported-by: Catalin Marinas <[email protected]> Reported-and-tested-by: Tetsuo Handa <[email protected]> Acked-by: Linus Torvalds <[email protected]> Acked-by: Eric W. Biederman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-04-02perf, probe-finder: Build fix on DebianBorislav Petkov1-5/+5
Building chokes with: In file included from /usr/include/gelf.h:53, from /usr/include/elfutils/libdw.h:53, from util/probe-finder.h:61, from util/probe-finder.c:39: /usr/include/libelf.h:98: error: expected specifier-qualifier-list before 'off64_t' [...] Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> LKML-Reference: <20100329164755.GA16034@aftab> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02kgdb: Turn off tracing while in the debuggerJason Wessel1-0/+8
The kernel debugger should turn off kernel tracing any time the debugger is active and restore it on resume. Signed-off-by: Jason Wessel <[email protected]> Reviewed-by: Steven Rostedt <[email protected]>
2010-04-02kgdb: use atomic_inc and atomic_dec instead of atomic_setJason Wessel1-8/+7
Memory barriers should be used for the kgdb cpu synchronization. The atomic_set() does not imply a memory barrier. Reported-by: Will Deacon <[email protected]> Signed-off-by: Jason Wessel <[email protected]>
2010-04-02kgdb: eliminate kgdb_wait(), all cpus enter the same wayJason Wessel1-83/+82
This is a kgdb architectural change to have all the cpus (master or slave) enter the same function. A cpu that hits an exception (wants to be the master cpu) will call kgdb_handle_exception() from the trap handler and then invoke a kgdb_roundup_cpu() to synchronize the other cpus and bring them into the kgdb_handle_exception() as well. A slave cpu will enter kgdb_handle_exception() from the kgdb_nmicallback() and set the exception state to note that the processor is a slave. Previously the salve cpu would have called kgdb_wait(). This change allows the debug core to change cpus without resuming the system in order to inspect arch specific cpu information. Signed-off-by: Jason Wessel <[email protected]>
2010-04-02kgdbts,sh: Add in breakpoint pc offset for superhJason Wessel1-0/+6
The kgdb test suite mimics the behavior of gdb. For the sh architecture the pc must be decremented by 2 for software breakpoint. Signed-off-by: Jason Wessel <[email protected]> Acked-by: Paul Mundt <[email protected]>
2010-04-02kgdb: have ebin2mem call probe_kernel_write onceJason Wessel1-14/+9
Rather than call probe_kernel_write() one byte at a time, process the whole buffer locally and pass the entire result in one go. This way, architectures that need to do special handling based on the length can do so, or we only end up calling memcpy() once. [[email protected]: Reported original problem and preliminary patch] Signed-off-by: Jason Wessel <[email protected]> Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Mike Frysinger <[email protected]>
2010-04-02perf/scripts: Tuple was set from long in both branches in python_process_event()Tom Zanussi1-5/+12
This is a fix to the signed/unsigned field handling in the Python scripting engine, based on a patch from Roel Kluin. Basically, Python wants to use a PyInt (which is internally a long) if it can i.e. if the value will fit into that type. If not, it stores it into a PyLong, which isn't actually a long, but an arbitrary-precision integer variable. The code below is similar to to what Python does internally, and it seems to work as expected on the x86 and x86_64 sytems I tested it on. Signed-off-by: Tom Zanussi <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Roel Kluin <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: [email protected] LKML-Reference: <1270184305.6422.10.camel@tropicana> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02sched: set_cpus_allowed_ptr(): Don't use rq->migration_thread after unlockOleg Nesterov1-1/+1
Trivial typo fix. rq->migration_thread can be NULL after task_rq_unlock(), this is why we have "mt" which should be used instead. Signed-off-by: Oleg Nesterov <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02sched: Fix proc_sched_set_task()Mike Galbraith1-4/+0
Latencytop clearing sum_exec_runtime via proc_sched_set_task() breaks task_times(). Other places in kernel use nvcsw and nivcsw, which are being cleared as well, Clear task statistics only. Reported-by: Török Edwin <[email protected]> Signed-off-by: Mike Galbraith <[email protected]> Cc: Hidetoshi Seto <[email protected]> Cc: Arjan van de Ven <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02perf: Fix 'perf sched record' deadlockMike Galbraith1-3/+12
perf sched record can deadlock a box should the holder of handle->data->lock take an interrupt, and then attempt to acquire an rq lock held by a CPU trying to acquire the same lock. Disable interrupts. CPU0 CPU1 sched event with rq->lock held grab handle->data->lock spin on handle->data->lock interrupt try to grab rq->lock Reported-by: Li Zefan <[email protected]> Signed-off-by: Mike Galbraith <[email protected]> Tested-by: Li Zefan <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Frederic Weisbecker <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernelsTorok Edwin2-5/+44
When profiling a 32-bit process on a 64-bit kernel, callgraph tracing stopped after the first function, because it has seen a garbage memory address (tried to interpret the frame pointer, and return address as a 64-bit pointer). Fix this by using a struct stack_frame with 32-bit pointers when the TIF_IA32 flag is set. Note that TIF_IA32 flag must be used, and not is_compat_task(), because the latter is only set when the 32-bit process is executing a syscall, which may not always be the case (when tracing page fault events for example). Signed-off-by: Török Edwin <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Acked-by: Frederic Weisbecker <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: [email protected] Cc: [email protected] LKML-Reference: <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02perf, x86: Fix AMD hotplug & constraint initializationPeter Zijlstra2-36/+52
Commit 3f6da39 ("perf: Rework and fix the arch CPU-hotplug hooks") moved the amd northbridge allocation from CPUS_ONLINE to CPUS_PREPARE_UP however amd_nb_id() doesn't work yet on prepare so it would simply bail basically reverting to a state where we do not properly track node wide constraints - causing weird perf results. Fix up the AMD NorthBridge initialization code by allocating from CPU_UP_PREPARE and installing it from CPU_STARTING once we have the proper nb_id. It also properly deals with the allocation failing. Signed-off-by: Peter Zijlstra <[email protected]> [ robustify using amd_has_nb() ] Signed-off-by: Stephane Eranian <[email protected]> LKML-Reference: <1269353485.5109.48.camel@twins> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02x86: Move notify_cpu_starting() callback to a later stagePeter Zijlstra1-2/+2
Because we need to have cpu identification things done by the time we run CPU_STARTING notifiers. ( This init ordering will be relied on by the next fix. ) Signed-off-by: Peter Zijlstra <[email protected]> LKML-Reference: <1269353485.5109.48.camel@twins> Signed-off-by: Ingo Molnar <[email protected]>
2010-04-02Merge branch 'perf/urgent' of ↵Ingo Molnar5-15/+25
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2010-04-02Merge branch 'for-linus' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Add NOGET quirk for Quanta Pixart touchscreen HID: fix oops in gyration_event()
2010-04-02Merge branch 'sh/for-2.6.34' of ↵Linus Torvalds12-84/+294
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix up the SH-3 build for recent TLB changes. sh: export return_address() symbol. sh: Enable the mmu in start_secondary() sh: Fix FDPIC binary loader arch/sh/kernel: Use set_cpus_allowed_ptr sh: Update ecovec_defconfig USB gadget r8a66597-udc.c: duplicated include sh: update the TLB replacement counter for entry wiring.
2010-04-02sh: Fix up the SH-3 build for recent TLB changes.Paul Mundt4-28/+75
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4 and later TLBs, these features are absent on SH-3. This splits out local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the old SH-3 one, subsequently fixing up the build. This will probably want some further reordering and tidying in the future, but that's out of scope at present. Signed-off-by: Paul Mundt <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.